1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * *************************************************************************** 4 * Marvell Armada-3700 Serial Driver 5 * Author: Wilson Ding <dingwei@marvell.com> 6 * Copyright (C) 2015 Marvell International Ltd. 7 * *************************************************************************** 8 */ 9 10 #include <linux/clk.h> 11 #include <linux/console.h> 12 #include <linux/delay.h> 13 #include <linux/device.h> 14 #include <linux/init.h> 15 #include <linux/io.h> 16 #include <linux/iopoll.h> 17 #include <linux/of.h> 18 #include <linux/of_address.h> 19 #include <linux/of_device.h> 20 #include <linux/of_irq.h> 21 #include <linux/of_platform.h> 22 #include <linux/platform_device.h> 23 #include <linux/serial.h> 24 #include <linux/serial_core.h> 25 #include <linux/slab.h> 26 #include <linux/tty.h> 27 #include <linux/tty_flip.h> 28 29 /* Register Map */ 30 #define UART_STD_RBR 0x00 31 #define UART_EXT_RBR 0x18 32 33 #define UART_STD_TSH 0x04 34 #define UART_EXT_TSH 0x1C 35 36 #define UART_STD_CTRL1 0x08 37 #define UART_EXT_CTRL1 0x04 38 #define CTRL_SOFT_RST BIT(31) 39 #define CTRL_TXFIFO_RST BIT(15) 40 #define CTRL_RXFIFO_RST BIT(14) 41 #define CTRL_SND_BRK_SEQ BIT(11) 42 #define CTRL_BRK_DET_INT BIT(3) 43 #define CTRL_FRM_ERR_INT BIT(2) 44 #define CTRL_PAR_ERR_INT BIT(1) 45 #define CTRL_OVR_ERR_INT BIT(0) 46 #define CTRL_BRK_INT (CTRL_BRK_DET_INT | CTRL_FRM_ERR_INT | \ 47 CTRL_PAR_ERR_INT | CTRL_OVR_ERR_INT) 48 49 #define UART_STD_CTRL2 UART_STD_CTRL1 50 #define UART_EXT_CTRL2 0x20 51 #define CTRL_STD_TX_RDY_INT BIT(5) 52 #define CTRL_EXT_TX_RDY_INT BIT(6) 53 #define CTRL_STD_RX_RDY_INT BIT(4) 54 #define CTRL_EXT_RX_RDY_INT BIT(5) 55 56 #define UART_STAT 0x0C 57 #define STAT_TX_FIFO_EMP BIT(13) 58 #define STAT_TX_FIFO_FUL BIT(11) 59 #define STAT_TX_EMP BIT(6) 60 #define STAT_STD_TX_RDY BIT(5) 61 #define STAT_EXT_TX_RDY BIT(15) 62 #define STAT_STD_RX_RDY BIT(4) 63 #define STAT_EXT_RX_RDY BIT(14) 64 #define STAT_BRK_DET BIT(3) 65 #define STAT_FRM_ERR BIT(2) 66 #define STAT_PAR_ERR BIT(1) 67 #define STAT_OVR_ERR BIT(0) 68 #define STAT_BRK_ERR (STAT_BRK_DET | STAT_FRM_ERR \ 69 | STAT_PAR_ERR | STAT_OVR_ERR) 70 71 #define UART_BRDV 0x10 72 #define BRDV_BAUD_MASK 0x3FF 73 74 #define UART_OSAMP 0x14 75 #define OSAMP_DEFAULT_DIVISOR 16 76 #define OSAMP_DIVISORS_MASK 0x3F3F3F3F 77 78 #define MVEBU_NR_UARTS 2 79 80 #define MVEBU_UART_TYPE "mvebu-uart" 81 #define DRIVER_NAME "mvebu_serial" 82 83 enum { 84 /* Either there is only one summed IRQ... */ 85 UART_IRQ_SUM = 0, 86 /* ...or there are two separate IRQ for RX and TX */ 87 UART_RX_IRQ = 0, 88 UART_TX_IRQ, 89 UART_IRQ_COUNT 90 }; 91 92 /* Diverging register offsets */ 93 struct uart_regs_layout { 94 unsigned int rbr; 95 unsigned int tsh; 96 unsigned int ctrl; 97 unsigned int intr; 98 }; 99 100 /* Diverging flags */ 101 struct uart_flags { 102 unsigned int ctrl_tx_rdy_int; 103 unsigned int ctrl_rx_rdy_int; 104 unsigned int stat_tx_rdy; 105 unsigned int stat_rx_rdy; 106 }; 107 108 /* Driver data, a structure for each UART port */ 109 struct mvebu_uart_driver_data { 110 bool is_ext; 111 struct uart_regs_layout regs; 112 struct uart_flags flags; 113 }; 114 115 /* Saved registers during suspend */ 116 struct mvebu_uart_pm_regs { 117 unsigned int rbr; 118 unsigned int tsh; 119 unsigned int ctrl; 120 unsigned int intr; 121 unsigned int stat; 122 unsigned int brdv; 123 unsigned int osamp; 124 }; 125 126 /* MVEBU UART driver structure */ 127 struct mvebu_uart { 128 struct uart_port *port; 129 struct clk *clk; 130 int irq[UART_IRQ_COUNT]; 131 unsigned char __iomem *nb; 132 struct mvebu_uart_driver_data *data; 133 #if defined(CONFIG_PM) 134 struct mvebu_uart_pm_regs pm_regs; 135 #endif /* CONFIG_PM */ 136 }; 137 138 static struct mvebu_uart *to_mvuart(struct uart_port *port) 139 { 140 return (struct mvebu_uart *)port->private_data; 141 } 142 143 #define IS_EXTENDED(port) (to_mvuart(port)->data->is_ext) 144 145 #define UART_RBR(port) (to_mvuart(port)->data->regs.rbr) 146 #define UART_TSH(port) (to_mvuart(port)->data->regs.tsh) 147 #define UART_CTRL(port) (to_mvuart(port)->data->regs.ctrl) 148 #define UART_INTR(port) (to_mvuart(port)->data->regs.intr) 149 150 #define CTRL_TX_RDY_INT(port) (to_mvuart(port)->data->flags.ctrl_tx_rdy_int) 151 #define CTRL_RX_RDY_INT(port) (to_mvuart(port)->data->flags.ctrl_rx_rdy_int) 152 #define STAT_TX_RDY(port) (to_mvuart(port)->data->flags.stat_tx_rdy) 153 #define STAT_RX_RDY(port) (to_mvuart(port)->data->flags.stat_rx_rdy) 154 155 static struct uart_port mvebu_uart_ports[MVEBU_NR_UARTS]; 156 157 /* Core UART Driver Operations */ 158 static unsigned int mvebu_uart_tx_empty(struct uart_port *port) 159 { 160 unsigned long flags; 161 unsigned int st; 162 163 spin_lock_irqsave(&port->lock, flags); 164 st = readl(port->membase + UART_STAT); 165 spin_unlock_irqrestore(&port->lock, flags); 166 167 return (st & STAT_TX_FIFO_EMP) ? TIOCSER_TEMT : 0; 168 } 169 170 static unsigned int mvebu_uart_get_mctrl(struct uart_port *port) 171 { 172 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; 173 } 174 175 static void mvebu_uart_set_mctrl(struct uart_port *port, 176 unsigned int mctrl) 177 { 178 /* 179 * Even if we do not support configuring the modem control lines, this 180 * function must be proided to the serial core 181 */ 182 } 183 184 static void mvebu_uart_stop_tx(struct uart_port *port) 185 { 186 unsigned int ctl = readl(port->membase + UART_INTR(port)); 187 188 ctl &= ~CTRL_TX_RDY_INT(port); 189 writel(ctl, port->membase + UART_INTR(port)); 190 } 191 192 static void mvebu_uart_start_tx(struct uart_port *port) 193 { 194 unsigned int ctl; 195 struct circ_buf *xmit = &port->state->xmit; 196 197 if (IS_EXTENDED(port) && !uart_circ_empty(xmit)) { 198 writel(xmit->buf[xmit->tail], port->membase + UART_TSH(port)); 199 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); 200 port->icount.tx++; 201 } 202 203 ctl = readl(port->membase + UART_INTR(port)); 204 ctl |= CTRL_TX_RDY_INT(port); 205 writel(ctl, port->membase + UART_INTR(port)); 206 } 207 208 static void mvebu_uart_stop_rx(struct uart_port *port) 209 { 210 unsigned int ctl; 211 212 ctl = readl(port->membase + UART_CTRL(port)); 213 ctl &= ~CTRL_BRK_INT; 214 writel(ctl, port->membase + UART_CTRL(port)); 215 216 ctl = readl(port->membase + UART_INTR(port)); 217 ctl &= ~CTRL_RX_RDY_INT(port); 218 writel(ctl, port->membase + UART_INTR(port)); 219 } 220 221 static void mvebu_uart_break_ctl(struct uart_port *port, int brk) 222 { 223 unsigned int ctl; 224 unsigned long flags; 225 226 spin_lock_irqsave(&port->lock, flags); 227 ctl = readl(port->membase + UART_CTRL(port)); 228 if (brk == -1) 229 ctl |= CTRL_SND_BRK_SEQ; 230 else 231 ctl &= ~CTRL_SND_BRK_SEQ; 232 writel(ctl, port->membase + UART_CTRL(port)); 233 spin_unlock_irqrestore(&port->lock, flags); 234 } 235 236 static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status) 237 { 238 struct tty_port *tport = &port->state->port; 239 unsigned char ch = 0; 240 char flag = 0; 241 242 do { 243 if (status & STAT_RX_RDY(port)) { 244 ch = readl(port->membase + UART_RBR(port)); 245 ch &= 0xff; 246 flag = TTY_NORMAL; 247 port->icount.rx++; 248 249 if (status & STAT_PAR_ERR) 250 port->icount.parity++; 251 } 252 253 if (status & STAT_BRK_DET) { 254 port->icount.brk++; 255 status &= ~(STAT_FRM_ERR | STAT_PAR_ERR); 256 if (uart_handle_break(port)) 257 goto ignore_char; 258 } 259 260 if (status & STAT_OVR_ERR) 261 port->icount.overrun++; 262 263 if (status & STAT_FRM_ERR) 264 port->icount.frame++; 265 266 if (uart_handle_sysrq_char(port, ch)) 267 goto ignore_char; 268 269 if (status & port->ignore_status_mask & STAT_PAR_ERR) 270 status &= ~STAT_RX_RDY(port); 271 272 status &= port->read_status_mask; 273 274 if (status & STAT_PAR_ERR) 275 flag = TTY_PARITY; 276 277 status &= ~port->ignore_status_mask; 278 279 if (status & STAT_RX_RDY(port)) 280 tty_insert_flip_char(tport, ch, flag); 281 282 if (status & STAT_BRK_DET) 283 tty_insert_flip_char(tport, 0, TTY_BREAK); 284 285 if (status & STAT_FRM_ERR) 286 tty_insert_flip_char(tport, 0, TTY_FRAME); 287 288 if (status & STAT_OVR_ERR) 289 tty_insert_flip_char(tport, 0, TTY_OVERRUN); 290 291 ignore_char: 292 status = readl(port->membase + UART_STAT); 293 } while (status & (STAT_RX_RDY(port) | STAT_BRK_DET)); 294 295 tty_flip_buffer_push(tport); 296 } 297 298 static void mvebu_uart_tx_chars(struct uart_port *port, unsigned int status) 299 { 300 struct circ_buf *xmit = &port->state->xmit; 301 unsigned int count; 302 unsigned int st; 303 304 if (port->x_char) { 305 writel(port->x_char, port->membase + UART_TSH(port)); 306 port->icount.tx++; 307 port->x_char = 0; 308 return; 309 } 310 311 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { 312 mvebu_uart_stop_tx(port); 313 return; 314 } 315 316 for (count = 0; count < port->fifosize; count++) { 317 writel(xmit->buf[xmit->tail], port->membase + UART_TSH(port)); 318 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); 319 port->icount.tx++; 320 321 if (uart_circ_empty(xmit)) 322 break; 323 324 st = readl(port->membase + UART_STAT); 325 if (st & STAT_TX_FIFO_FUL) 326 break; 327 } 328 329 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 330 uart_write_wakeup(port); 331 332 if (uart_circ_empty(xmit)) 333 mvebu_uart_stop_tx(port); 334 } 335 336 static irqreturn_t mvebu_uart_isr(int irq, void *dev_id) 337 { 338 struct uart_port *port = (struct uart_port *)dev_id; 339 unsigned int st = readl(port->membase + UART_STAT); 340 341 if (st & (STAT_RX_RDY(port) | STAT_OVR_ERR | STAT_FRM_ERR | 342 STAT_BRK_DET)) 343 mvebu_uart_rx_chars(port, st); 344 345 if (st & STAT_TX_RDY(port)) 346 mvebu_uart_tx_chars(port, st); 347 348 return IRQ_HANDLED; 349 } 350 351 static irqreturn_t mvebu_uart_rx_isr(int irq, void *dev_id) 352 { 353 struct uart_port *port = (struct uart_port *)dev_id; 354 unsigned int st = readl(port->membase + UART_STAT); 355 356 if (st & (STAT_RX_RDY(port) | STAT_OVR_ERR | STAT_FRM_ERR | 357 STAT_BRK_DET)) 358 mvebu_uart_rx_chars(port, st); 359 360 return IRQ_HANDLED; 361 } 362 363 static irqreturn_t mvebu_uart_tx_isr(int irq, void *dev_id) 364 { 365 struct uart_port *port = (struct uart_port *)dev_id; 366 unsigned int st = readl(port->membase + UART_STAT); 367 368 if (st & STAT_TX_RDY(port)) 369 mvebu_uart_tx_chars(port, st); 370 371 return IRQ_HANDLED; 372 } 373 374 static int mvebu_uart_startup(struct uart_port *port) 375 { 376 struct mvebu_uart *mvuart = to_mvuart(port); 377 unsigned int ctl; 378 int ret; 379 380 writel(CTRL_TXFIFO_RST | CTRL_RXFIFO_RST, 381 port->membase + UART_CTRL(port)); 382 udelay(1); 383 384 /* Clear the error bits of state register before IRQ request */ 385 ret = readl(port->membase + UART_STAT); 386 ret |= STAT_BRK_ERR; 387 writel(ret, port->membase + UART_STAT); 388 389 writel(CTRL_BRK_INT, port->membase + UART_CTRL(port)); 390 391 ctl = readl(port->membase + UART_INTR(port)); 392 ctl |= CTRL_RX_RDY_INT(port); 393 writel(ctl, port->membase + UART_INTR(port)); 394 395 if (!mvuart->irq[UART_TX_IRQ]) { 396 /* Old bindings with just one interrupt (UART0 only) */ 397 ret = devm_request_irq(port->dev, mvuart->irq[UART_IRQ_SUM], 398 mvebu_uart_isr, port->irqflags, 399 dev_name(port->dev), port); 400 if (ret) { 401 dev_err(port->dev, "unable to request IRQ %d\n", 402 mvuart->irq[UART_IRQ_SUM]); 403 return ret; 404 } 405 } else { 406 /* New bindings with an IRQ for RX and TX (both UART) */ 407 ret = devm_request_irq(port->dev, mvuart->irq[UART_RX_IRQ], 408 mvebu_uart_rx_isr, port->irqflags, 409 dev_name(port->dev), port); 410 if (ret) { 411 dev_err(port->dev, "unable to request IRQ %d\n", 412 mvuart->irq[UART_RX_IRQ]); 413 return ret; 414 } 415 416 ret = devm_request_irq(port->dev, mvuart->irq[UART_TX_IRQ], 417 mvebu_uart_tx_isr, port->irqflags, 418 dev_name(port->dev), 419 port); 420 if (ret) { 421 dev_err(port->dev, "unable to request IRQ %d\n", 422 mvuart->irq[UART_TX_IRQ]); 423 devm_free_irq(port->dev, mvuart->irq[UART_RX_IRQ], 424 port); 425 return ret; 426 } 427 } 428 429 return 0; 430 } 431 432 static void mvebu_uart_shutdown(struct uart_port *port) 433 { 434 struct mvebu_uart *mvuart = to_mvuart(port); 435 436 writel(0, port->membase + UART_INTR(port)); 437 438 if (!mvuart->irq[UART_TX_IRQ]) { 439 devm_free_irq(port->dev, mvuart->irq[UART_IRQ_SUM], port); 440 } else { 441 devm_free_irq(port->dev, mvuart->irq[UART_RX_IRQ], port); 442 devm_free_irq(port->dev, mvuart->irq[UART_TX_IRQ], port); 443 } 444 } 445 446 static int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud) 447 { 448 struct mvebu_uart *mvuart = to_mvuart(port); 449 unsigned int d_divisor, m_divisor; 450 u32 brdv, osamp; 451 452 if (IS_ERR(mvuart->clk)) 453 return -PTR_ERR(mvuart->clk); 454 455 /* 456 * The baudrate is derived from the UART clock thanks to two divisors: 457 * > D ("baud generator"): can divide the clock from 2 to 2^10 - 1. 458 * > M ("fractional divisor"): allows a better accuracy for 459 * baudrates higher than 230400. 460 * 461 * As the derivation of M is rather complicated, the code sticks to its 462 * default value (x16) when all the prescalers are zeroed, and only 463 * makes use of D to configure the desired baudrate. 464 */ 465 m_divisor = OSAMP_DEFAULT_DIVISOR; 466 d_divisor = DIV_ROUND_UP(port->uartclk, baud * m_divisor); 467 468 brdv = readl(port->membase + UART_BRDV); 469 brdv &= ~BRDV_BAUD_MASK; 470 brdv |= d_divisor; 471 writel(brdv, port->membase + UART_BRDV); 472 473 osamp = readl(port->membase + UART_OSAMP); 474 osamp &= ~OSAMP_DIVISORS_MASK; 475 writel(osamp, port->membase + UART_OSAMP); 476 477 return 0; 478 } 479 480 static void mvebu_uart_set_termios(struct uart_port *port, 481 struct ktermios *termios, 482 struct ktermios *old) 483 { 484 unsigned long flags; 485 unsigned int baud; 486 487 spin_lock_irqsave(&port->lock, flags); 488 489 port->read_status_mask = STAT_RX_RDY(port) | STAT_OVR_ERR | 490 STAT_TX_RDY(port) | STAT_TX_FIFO_FUL; 491 492 if (termios->c_iflag & INPCK) 493 port->read_status_mask |= STAT_FRM_ERR | STAT_PAR_ERR; 494 495 port->ignore_status_mask = 0; 496 if (termios->c_iflag & IGNPAR) 497 port->ignore_status_mask |= 498 STAT_FRM_ERR | STAT_PAR_ERR | STAT_OVR_ERR; 499 500 if ((termios->c_cflag & CREAD) == 0) 501 port->ignore_status_mask |= STAT_RX_RDY(port) | STAT_BRK_ERR; 502 503 /* 504 * Maximum achievable frequency with simple baudrate divisor is 230400. 505 * Since the error per bit frame would be of more than 15%, achieving 506 * higher frequencies would require to implement the fractional divisor 507 * feature. 508 */ 509 baud = uart_get_baud_rate(port, termios, old, 0, 230400); 510 if (mvebu_uart_baud_rate_set(port, baud)) { 511 /* No clock available, baudrate cannot be changed */ 512 if (old) 513 baud = uart_get_baud_rate(port, old, NULL, 0, 230400); 514 } else { 515 tty_termios_encode_baud_rate(termios, baud, baud); 516 uart_update_timeout(port, termios->c_cflag, baud); 517 } 518 519 /* Only the following flag changes are supported */ 520 if (old) { 521 termios->c_iflag &= INPCK | IGNPAR; 522 termios->c_iflag |= old->c_iflag & ~(INPCK | IGNPAR); 523 termios->c_cflag &= CREAD | CBAUD; 524 termios->c_cflag |= old->c_cflag & ~(CREAD | CBAUD); 525 termios->c_cflag |= CS8; 526 } 527 528 spin_unlock_irqrestore(&port->lock, flags); 529 } 530 531 static const char *mvebu_uart_type(struct uart_port *port) 532 { 533 return MVEBU_UART_TYPE; 534 } 535 536 static void mvebu_uart_release_port(struct uart_port *port) 537 { 538 /* Nothing to do here */ 539 } 540 541 static int mvebu_uart_request_port(struct uart_port *port) 542 { 543 return 0; 544 } 545 546 #ifdef CONFIG_CONSOLE_POLL 547 static int mvebu_uart_get_poll_char(struct uart_port *port) 548 { 549 unsigned int st = readl(port->membase + UART_STAT); 550 551 if (!(st & STAT_RX_RDY(port))) 552 return NO_POLL_CHAR; 553 554 return readl(port->membase + UART_RBR(port)); 555 } 556 557 static void mvebu_uart_put_poll_char(struct uart_port *port, unsigned char c) 558 { 559 unsigned int st; 560 561 for (;;) { 562 st = readl(port->membase + UART_STAT); 563 564 if (!(st & STAT_TX_FIFO_FUL)) 565 break; 566 567 udelay(1); 568 } 569 570 writel(c, port->membase + UART_TSH(port)); 571 } 572 #endif 573 574 static const struct uart_ops mvebu_uart_ops = { 575 .tx_empty = mvebu_uart_tx_empty, 576 .set_mctrl = mvebu_uart_set_mctrl, 577 .get_mctrl = mvebu_uart_get_mctrl, 578 .stop_tx = mvebu_uart_stop_tx, 579 .start_tx = mvebu_uart_start_tx, 580 .stop_rx = mvebu_uart_stop_rx, 581 .break_ctl = mvebu_uart_break_ctl, 582 .startup = mvebu_uart_startup, 583 .shutdown = mvebu_uart_shutdown, 584 .set_termios = mvebu_uart_set_termios, 585 .type = mvebu_uart_type, 586 .release_port = mvebu_uart_release_port, 587 .request_port = mvebu_uart_request_port, 588 #ifdef CONFIG_CONSOLE_POLL 589 .poll_get_char = mvebu_uart_get_poll_char, 590 .poll_put_char = mvebu_uart_put_poll_char, 591 #endif 592 }; 593 594 /* Console Driver Operations */ 595 596 #ifdef CONFIG_SERIAL_MVEBU_CONSOLE 597 /* Early Console */ 598 static void mvebu_uart_putc(struct uart_port *port, int c) 599 { 600 unsigned int st; 601 602 for (;;) { 603 st = readl(port->membase + UART_STAT); 604 if (!(st & STAT_TX_FIFO_FUL)) 605 break; 606 } 607 608 /* At early stage, DT is not parsed yet, only use UART0 */ 609 writel(c, port->membase + UART_STD_TSH); 610 611 for (;;) { 612 st = readl(port->membase + UART_STAT); 613 if (st & STAT_TX_FIFO_EMP) 614 break; 615 } 616 } 617 618 static void mvebu_uart_putc_early_write(struct console *con, 619 const char *s, 620 unsigned n) 621 { 622 struct earlycon_device *dev = con->data; 623 624 uart_console_write(&dev->port, s, n, mvebu_uart_putc); 625 } 626 627 static int __init 628 mvebu_uart_early_console_setup(struct earlycon_device *device, 629 const char *opt) 630 { 631 if (!device->port.membase) 632 return -ENODEV; 633 634 device->con->write = mvebu_uart_putc_early_write; 635 636 return 0; 637 } 638 639 EARLYCON_DECLARE(ar3700_uart, mvebu_uart_early_console_setup); 640 OF_EARLYCON_DECLARE(ar3700_uart, "marvell,armada-3700-uart", 641 mvebu_uart_early_console_setup); 642 643 static void wait_for_xmitr(struct uart_port *port) 644 { 645 u32 val; 646 647 readl_poll_timeout_atomic(port->membase + UART_STAT, val, 648 (val & STAT_TX_RDY(port)), 1, 10000); 649 } 650 651 static void wait_for_xmite(struct uart_port *port) 652 { 653 u32 val; 654 655 readl_poll_timeout_atomic(port->membase + UART_STAT, val, 656 (val & STAT_TX_EMP), 1, 10000); 657 } 658 659 static void mvebu_uart_console_putchar(struct uart_port *port, int ch) 660 { 661 wait_for_xmitr(port); 662 writel(ch, port->membase + UART_TSH(port)); 663 } 664 665 static void mvebu_uart_console_write(struct console *co, const char *s, 666 unsigned int count) 667 { 668 struct uart_port *port = &mvebu_uart_ports[co->index]; 669 unsigned long flags; 670 unsigned int ier, intr, ctl; 671 int locked = 1; 672 673 if (oops_in_progress) 674 locked = spin_trylock_irqsave(&port->lock, flags); 675 else 676 spin_lock_irqsave(&port->lock, flags); 677 678 ier = readl(port->membase + UART_CTRL(port)) & CTRL_BRK_INT; 679 intr = readl(port->membase + UART_INTR(port)) & 680 (CTRL_RX_RDY_INT(port) | CTRL_TX_RDY_INT(port)); 681 writel(0, port->membase + UART_CTRL(port)); 682 writel(0, port->membase + UART_INTR(port)); 683 684 uart_console_write(port, s, count, mvebu_uart_console_putchar); 685 686 wait_for_xmite(port); 687 688 if (ier) 689 writel(ier, port->membase + UART_CTRL(port)); 690 691 if (intr) { 692 ctl = intr | readl(port->membase + UART_INTR(port)); 693 writel(ctl, port->membase + UART_INTR(port)); 694 } 695 696 if (locked) 697 spin_unlock_irqrestore(&port->lock, flags); 698 } 699 700 static int mvebu_uart_console_setup(struct console *co, char *options) 701 { 702 struct uart_port *port; 703 int baud = 9600; 704 int bits = 8; 705 int parity = 'n'; 706 int flow = 'n'; 707 708 if (co->index < 0 || co->index >= MVEBU_NR_UARTS) 709 return -EINVAL; 710 711 port = &mvebu_uart_ports[co->index]; 712 713 if (!port->mapbase || !port->membase) { 714 pr_debug("console on ttyMV%i not present\n", co->index); 715 return -ENODEV; 716 } 717 718 if (options) 719 uart_parse_options(options, &baud, &parity, &bits, &flow); 720 721 return uart_set_options(port, co, baud, parity, bits, flow); 722 } 723 724 static struct uart_driver mvebu_uart_driver; 725 726 static struct console mvebu_uart_console = { 727 .name = "ttyMV", 728 .write = mvebu_uart_console_write, 729 .device = uart_console_device, 730 .setup = mvebu_uart_console_setup, 731 .flags = CON_PRINTBUFFER, 732 .index = -1, 733 .data = &mvebu_uart_driver, 734 }; 735 736 static int __init mvebu_uart_console_init(void) 737 { 738 register_console(&mvebu_uart_console); 739 return 0; 740 } 741 742 console_initcall(mvebu_uart_console_init); 743 744 745 #endif /* CONFIG_SERIAL_MVEBU_CONSOLE */ 746 747 static struct uart_driver mvebu_uart_driver = { 748 .owner = THIS_MODULE, 749 .driver_name = DRIVER_NAME, 750 .dev_name = "ttyMV", 751 .nr = MVEBU_NR_UARTS, 752 #ifdef CONFIG_SERIAL_MVEBU_CONSOLE 753 .cons = &mvebu_uart_console, 754 #endif 755 }; 756 757 #if defined(CONFIG_PM) 758 static int mvebu_uart_suspend(struct device *dev) 759 { 760 struct mvebu_uart *mvuart = dev_get_drvdata(dev); 761 struct uart_port *port = mvuart->port; 762 763 uart_suspend_port(&mvebu_uart_driver, port); 764 765 mvuart->pm_regs.rbr = readl(port->membase + UART_RBR(port)); 766 mvuart->pm_regs.tsh = readl(port->membase + UART_TSH(port)); 767 mvuart->pm_regs.ctrl = readl(port->membase + UART_CTRL(port)); 768 mvuart->pm_regs.intr = readl(port->membase + UART_INTR(port)); 769 mvuart->pm_regs.stat = readl(port->membase + UART_STAT); 770 mvuart->pm_regs.brdv = readl(port->membase + UART_BRDV); 771 mvuart->pm_regs.osamp = readl(port->membase + UART_OSAMP); 772 773 device_set_wakeup_enable(dev, true); 774 775 return 0; 776 } 777 778 static int mvebu_uart_resume(struct device *dev) 779 { 780 struct mvebu_uart *mvuart = dev_get_drvdata(dev); 781 struct uart_port *port = mvuart->port; 782 783 writel(mvuart->pm_regs.rbr, port->membase + UART_RBR(port)); 784 writel(mvuart->pm_regs.tsh, port->membase + UART_TSH(port)); 785 writel(mvuart->pm_regs.ctrl, port->membase + UART_CTRL(port)); 786 writel(mvuart->pm_regs.intr, port->membase + UART_INTR(port)); 787 writel(mvuart->pm_regs.stat, port->membase + UART_STAT); 788 writel(mvuart->pm_regs.brdv, port->membase + UART_BRDV); 789 writel(mvuart->pm_regs.osamp, port->membase + UART_OSAMP); 790 791 uart_resume_port(&mvebu_uart_driver, port); 792 793 return 0; 794 } 795 796 static const struct dev_pm_ops mvebu_uart_pm_ops = { 797 .suspend = mvebu_uart_suspend, 798 .resume = mvebu_uart_resume, 799 }; 800 #endif /* CONFIG_PM */ 801 802 static const struct of_device_id mvebu_uart_of_match[]; 803 804 /* Counter to keep track of each UART port id when not using CONFIG_OF */ 805 static int uart_num_counter; 806 807 static int mvebu_uart_probe(struct platform_device *pdev) 808 { 809 struct resource *reg = platform_get_resource(pdev, IORESOURCE_MEM, 0); 810 const struct of_device_id *match = of_match_device(mvebu_uart_of_match, 811 &pdev->dev); 812 struct uart_port *port; 813 struct mvebu_uart *mvuart; 814 int id, irq; 815 816 if (!reg) { 817 dev_err(&pdev->dev, "no registers defined\n"); 818 return -EINVAL; 819 } 820 821 if (!match) 822 return -ENODEV; 823 824 /* Assume that all UART ports have a DT alias or none has */ 825 id = of_alias_get_id(pdev->dev.of_node, "serial"); 826 if (!pdev->dev.of_node || id < 0) 827 pdev->id = uart_num_counter++; 828 else 829 pdev->id = id; 830 831 if (pdev->id >= MVEBU_NR_UARTS) { 832 dev_err(&pdev->dev, "cannot have more than %d UART ports\n", 833 MVEBU_NR_UARTS); 834 return -EINVAL; 835 } 836 837 port = &mvebu_uart_ports[pdev->id]; 838 839 spin_lock_init(&port->lock); 840 841 port->dev = &pdev->dev; 842 port->type = PORT_MVEBU; 843 port->ops = &mvebu_uart_ops; 844 port->regshift = 0; 845 846 port->fifosize = 32; 847 port->iotype = UPIO_MEM32; 848 port->flags = UPF_FIXED_PORT; 849 port->line = pdev->id; 850 851 /* 852 * IRQ number is not stored in this structure because we may have two of 853 * them per port (RX and TX). Instead, use the driver UART structure 854 * array so called ->irq[]. 855 */ 856 port->irq = 0; 857 port->irqflags = 0; 858 port->mapbase = reg->start; 859 860 port->membase = devm_ioremap_resource(&pdev->dev, reg); 861 if (IS_ERR(port->membase)) 862 return PTR_ERR(port->membase); 863 864 mvuart = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_uart), 865 GFP_KERNEL); 866 if (!mvuart) 867 return -ENOMEM; 868 869 /* Get controller data depending on the compatible string */ 870 mvuart->data = (struct mvebu_uart_driver_data *)match->data; 871 mvuart->port = port; 872 873 port->private_data = mvuart; 874 platform_set_drvdata(pdev, mvuart); 875 876 /* Get fixed clock frequency */ 877 mvuart->clk = devm_clk_get(&pdev->dev, NULL); 878 if (IS_ERR(mvuart->clk)) { 879 if (PTR_ERR(mvuart->clk) == -EPROBE_DEFER) 880 return PTR_ERR(mvuart->clk); 881 882 if (IS_EXTENDED(port)) { 883 dev_err(&pdev->dev, "unable to get UART clock\n"); 884 return PTR_ERR(mvuart->clk); 885 } 886 } else { 887 if (!clk_prepare_enable(mvuart->clk)) 888 port->uartclk = clk_get_rate(mvuart->clk); 889 } 890 891 /* Manage interrupts */ 892 if (platform_irq_count(pdev) == 1) { 893 /* Old bindings: no name on the single unamed UART0 IRQ */ 894 irq = platform_get_irq(pdev, 0); 895 if (irq < 0) 896 return irq; 897 898 mvuart->irq[UART_IRQ_SUM] = irq; 899 } else { 900 /* 901 * New bindings: named interrupts (RX, TX) for both UARTS, 902 * only make use of uart-rx and uart-tx interrupts, do not use 903 * uart-sum of UART0 port. 904 */ 905 irq = platform_get_irq_byname(pdev, "uart-rx"); 906 if (irq < 0) 907 return irq; 908 909 mvuart->irq[UART_RX_IRQ] = irq; 910 911 irq = platform_get_irq_byname(pdev, "uart-tx"); 912 if (irq < 0) 913 return irq; 914 915 mvuart->irq[UART_TX_IRQ] = irq; 916 } 917 918 /* UART Soft Reset*/ 919 writel(CTRL_SOFT_RST, port->membase + UART_CTRL(port)); 920 udelay(1); 921 writel(0, port->membase + UART_CTRL(port)); 922 923 return uart_add_one_port(&mvebu_uart_driver, port); 924 } 925 926 static struct mvebu_uart_driver_data uart_std_driver_data = { 927 .is_ext = false, 928 .regs.rbr = UART_STD_RBR, 929 .regs.tsh = UART_STD_TSH, 930 .regs.ctrl = UART_STD_CTRL1, 931 .regs.intr = UART_STD_CTRL2, 932 .flags.ctrl_tx_rdy_int = CTRL_STD_TX_RDY_INT, 933 .flags.ctrl_rx_rdy_int = CTRL_STD_RX_RDY_INT, 934 .flags.stat_tx_rdy = STAT_STD_TX_RDY, 935 .flags.stat_rx_rdy = STAT_STD_RX_RDY, 936 }; 937 938 static struct mvebu_uart_driver_data uart_ext_driver_data = { 939 .is_ext = true, 940 .regs.rbr = UART_EXT_RBR, 941 .regs.tsh = UART_EXT_TSH, 942 .regs.ctrl = UART_EXT_CTRL1, 943 .regs.intr = UART_EXT_CTRL2, 944 .flags.ctrl_tx_rdy_int = CTRL_EXT_TX_RDY_INT, 945 .flags.ctrl_rx_rdy_int = CTRL_EXT_RX_RDY_INT, 946 .flags.stat_tx_rdy = STAT_EXT_TX_RDY, 947 .flags.stat_rx_rdy = STAT_EXT_RX_RDY, 948 }; 949 950 /* Match table for of_platform binding */ 951 static const struct of_device_id mvebu_uart_of_match[] = { 952 { 953 .compatible = "marvell,armada-3700-uart", 954 .data = (void *)&uart_std_driver_data, 955 }, 956 { 957 .compatible = "marvell,armada-3700-uart-ext", 958 .data = (void *)&uart_ext_driver_data, 959 }, 960 {} 961 }; 962 963 static struct platform_driver mvebu_uart_platform_driver = { 964 .probe = mvebu_uart_probe, 965 .driver = { 966 .name = "mvebu-uart", 967 .of_match_table = of_match_ptr(mvebu_uart_of_match), 968 .suppress_bind_attrs = true, 969 #if defined(CONFIG_PM) 970 .pm = &mvebu_uart_pm_ops, 971 #endif /* CONFIG_PM */ 972 }, 973 }; 974 975 static int __init mvebu_uart_init(void) 976 { 977 int ret; 978 979 ret = uart_register_driver(&mvebu_uart_driver); 980 if (ret) 981 return ret; 982 983 ret = platform_driver_register(&mvebu_uart_platform_driver); 984 if (ret) 985 uart_unregister_driver(&mvebu_uart_driver); 986 987 return ret; 988 } 989 arch_initcall(mvebu_uart_init); 990