1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * *************************************************************************** 4 * Marvell Armada-3700 Serial Driver 5 * Author: Wilson Ding <dingwei@marvell.com> 6 * Copyright (C) 2015 Marvell International Ltd. 7 * *************************************************************************** 8 */ 9 10 #include <linux/clk.h> 11 #include <linux/console.h> 12 #include <linux/delay.h> 13 #include <linux/device.h> 14 #include <linux/init.h> 15 #include <linux/io.h> 16 #include <linux/iopoll.h> 17 #include <linux/of.h> 18 #include <linux/of_address.h> 19 #include <linux/of_device.h> 20 #include <linux/of_irq.h> 21 #include <linux/of_platform.h> 22 #include <linux/platform_device.h> 23 #include <linux/serial.h> 24 #include <linux/serial_core.h> 25 #include <linux/slab.h> 26 #include <linux/tty.h> 27 #include <linux/tty_flip.h> 28 29 /* Register Map */ 30 #define UART_STD_RBR 0x00 31 #define UART_EXT_RBR 0x18 32 33 #define UART_STD_TSH 0x04 34 #define UART_EXT_TSH 0x1C 35 36 #define UART_STD_CTRL1 0x08 37 #define UART_EXT_CTRL1 0x04 38 #define CTRL_SOFT_RST BIT(31) 39 #define CTRL_TXFIFO_RST BIT(15) 40 #define CTRL_RXFIFO_RST BIT(14) 41 #define CTRL_SND_BRK_SEQ BIT(11) 42 #define CTRL_BRK_DET_INT BIT(3) 43 #define CTRL_FRM_ERR_INT BIT(2) 44 #define CTRL_PAR_ERR_INT BIT(1) 45 #define CTRL_OVR_ERR_INT BIT(0) 46 #define CTRL_BRK_INT (CTRL_BRK_DET_INT | CTRL_FRM_ERR_INT | \ 47 CTRL_PAR_ERR_INT | CTRL_OVR_ERR_INT) 48 49 #define UART_STD_CTRL2 UART_STD_CTRL1 50 #define UART_EXT_CTRL2 0x20 51 #define CTRL_STD_TX_RDY_INT BIT(5) 52 #define CTRL_EXT_TX_RDY_INT BIT(6) 53 #define CTRL_STD_RX_RDY_INT BIT(4) 54 #define CTRL_EXT_RX_RDY_INT BIT(5) 55 56 #define UART_STAT 0x0C 57 #define STAT_TX_FIFO_EMP BIT(13) 58 #define STAT_TX_FIFO_FUL BIT(11) 59 #define STAT_TX_EMP BIT(6) 60 #define STAT_STD_TX_RDY BIT(5) 61 #define STAT_EXT_TX_RDY BIT(15) 62 #define STAT_STD_RX_RDY BIT(4) 63 #define STAT_EXT_RX_RDY BIT(14) 64 #define STAT_BRK_DET BIT(3) 65 #define STAT_FRM_ERR BIT(2) 66 #define STAT_PAR_ERR BIT(1) 67 #define STAT_OVR_ERR BIT(0) 68 #define STAT_BRK_ERR (STAT_BRK_DET | STAT_FRM_ERR \ 69 | STAT_PAR_ERR | STAT_OVR_ERR) 70 71 #define UART_BRDV 0x10 72 #define BRDV_BAUD_MASK 0x3FF 73 74 #define UART_OSAMP 0x14 75 #define OSAMP_DEFAULT_DIVISOR 16 76 #define OSAMP_DIVISORS_MASK 0x3F3F3F3F 77 78 #define MVEBU_NR_UARTS 2 79 80 #define MVEBU_UART_TYPE "mvebu-uart" 81 #define DRIVER_NAME "mvebu_serial" 82 83 enum { 84 /* Either there is only one summed IRQ... */ 85 UART_IRQ_SUM = 0, 86 /* ...or there are two separate IRQ for RX and TX */ 87 UART_RX_IRQ = 0, 88 UART_TX_IRQ, 89 UART_IRQ_COUNT 90 }; 91 92 /* Diverging register offsets */ 93 struct uart_regs_layout { 94 unsigned int rbr; 95 unsigned int tsh; 96 unsigned int ctrl; 97 unsigned int intr; 98 }; 99 100 /* Diverging flags */ 101 struct uart_flags { 102 unsigned int ctrl_tx_rdy_int; 103 unsigned int ctrl_rx_rdy_int; 104 unsigned int stat_tx_rdy; 105 unsigned int stat_rx_rdy; 106 }; 107 108 /* Driver data, a structure for each UART port */ 109 struct mvebu_uart_driver_data { 110 bool is_ext; 111 struct uart_regs_layout regs; 112 struct uart_flags flags; 113 }; 114 115 /* Saved registers during suspend */ 116 struct mvebu_uart_pm_regs { 117 unsigned int rbr; 118 unsigned int tsh; 119 unsigned int ctrl; 120 unsigned int intr; 121 unsigned int stat; 122 unsigned int brdv; 123 unsigned int osamp; 124 }; 125 126 /* MVEBU UART driver structure */ 127 struct mvebu_uart { 128 struct uart_port *port; 129 struct clk *clk; 130 int irq[UART_IRQ_COUNT]; 131 unsigned char __iomem *nb; 132 struct mvebu_uart_driver_data *data; 133 #if defined(CONFIG_PM) 134 struct mvebu_uart_pm_regs pm_regs; 135 #endif /* CONFIG_PM */ 136 }; 137 138 static struct mvebu_uart *to_mvuart(struct uart_port *port) 139 { 140 return (struct mvebu_uart *)port->private_data; 141 } 142 143 #define IS_EXTENDED(port) (to_mvuart(port)->data->is_ext) 144 145 #define UART_RBR(port) (to_mvuart(port)->data->regs.rbr) 146 #define UART_TSH(port) (to_mvuart(port)->data->regs.tsh) 147 #define UART_CTRL(port) (to_mvuart(port)->data->regs.ctrl) 148 #define UART_INTR(port) (to_mvuart(port)->data->regs.intr) 149 150 #define CTRL_TX_RDY_INT(port) (to_mvuart(port)->data->flags.ctrl_tx_rdy_int) 151 #define CTRL_RX_RDY_INT(port) (to_mvuart(port)->data->flags.ctrl_rx_rdy_int) 152 #define STAT_TX_RDY(port) (to_mvuart(port)->data->flags.stat_tx_rdy) 153 #define STAT_RX_RDY(port) (to_mvuart(port)->data->flags.stat_rx_rdy) 154 155 static struct uart_port mvebu_uart_ports[MVEBU_NR_UARTS]; 156 157 /* Core UART Driver Operations */ 158 static unsigned int mvebu_uart_tx_empty(struct uart_port *port) 159 { 160 unsigned long flags; 161 unsigned int st; 162 163 spin_lock_irqsave(&port->lock, flags); 164 st = readl(port->membase + UART_STAT); 165 spin_unlock_irqrestore(&port->lock, flags); 166 167 return (st & STAT_TX_FIFO_EMP) ? TIOCSER_TEMT : 0; 168 } 169 170 static unsigned int mvebu_uart_get_mctrl(struct uart_port *port) 171 { 172 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; 173 } 174 175 static void mvebu_uart_set_mctrl(struct uart_port *port, 176 unsigned int mctrl) 177 { 178 /* 179 * Even if we do not support configuring the modem control lines, this 180 * function must be proided to the serial core 181 */ 182 } 183 184 static void mvebu_uart_stop_tx(struct uart_port *port) 185 { 186 unsigned int ctl = readl(port->membase + UART_INTR(port)); 187 188 ctl &= ~CTRL_TX_RDY_INT(port); 189 writel(ctl, port->membase + UART_INTR(port)); 190 } 191 192 static void mvebu_uart_start_tx(struct uart_port *port) 193 { 194 unsigned int ctl; 195 struct circ_buf *xmit = &port->state->xmit; 196 197 if (IS_EXTENDED(port) && !uart_circ_empty(xmit)) { 198 writel(xmit->buf[xmit->tail], port->membase + UART_TSH(port)); 199 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); 200 port->icount.tx++; 201 } 202 203 ctl = readl(port->membase + UART_INTR(port)); 204 ctl |= CTRL_TX_RDY_INT(port); 205 writel(ctl, port->membase + UART_INTR(port)); 206 } 207 208 static void mvebu_uart_stop_rx(struct uart_port *port) 209 { 210 unsigned int ctl; 211 212 ctl = readl(port->membase + UART_CTRL(port)); 213 ctl &= ~CTRL_BRK_INT; 214 writel(ctl, port->membase + UART_CTRL(port)); 215 216 ctl = readl(port->membase + UART_INTR(port)); 217 ctl &= ~CTRL_RX_RDY_INT(port); 218 writel(ctl, port->membase + UART_INTR(port)); 219 } 220 221 static void mvebu_uart_break_ctl(struct uart_port *port, int brk) 222 { 223 unsigned int ctl; 224 unsigned long flags; 225 226 spin_lock_irqsave(&port->lock, flags); 227 ctl = readl(port->membase + UART_CTRL(port)); 228 if (brk == -1) 229 ctl |= CTRL_SND_BRK_SEQ; 230 else 231 ctl &= ~CTRL_SND_BRK_SEQ; 232 writel(ctl, port->membase + UART_CTRL(port)); 233 spin_unlock_irqrestore(&port->lock, flags); 234 } 235 236 static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status) 237 { 238 struct tty_port *tport = &port->state->port; 239 unsigned char ch = 0; 240 char flag = 0; 241 242 do { 243 if (status & STAT_RX_RDY(port)) { 244 ch = readl(port->membase + UART_RBR(port)); 245 ch &= 0xff; 246 flag = TTY_NORMAL; 247 port->icount.rx++; 248 249 if (status & STAT_PAR_ERR) 250 port->icount.parity++; 251 } 252 253 if (status & STAT_BRK_DET) { 254 port->icount.brk++; 255 status &= ~(STAT_FRM_ERR | STAT_PAR_ERR); 256 if (uart_handle_break(port)) 257 goto ignore_char; 258 } 259 260 if (status & STAT_OVR_ERR) 261 port->icount.overrun++; 262 263 if (status & STAT_FRM_ERR) 264 port->icount.frame++; 265 266 if (uart_handle_sysrq_char(port, ch)) 267 goto ignore_char; 268 269 if (status & port->ignore_status_mask & STAT_PAR_ERR) 270 status &= ~STAT_RX_RDY(port); 271 272 status &= port->read_status_mask; 273 274 if (status & STAT_PAR_ERR) 275 flag = TTY_PARITY; 276 277 status &= ~port->ignore_status_mask; 278 279 if (status & STAT_RX_RDY(port)) 280 tty_insert_flip_char(tport, ch, flag); 281 282 if (status & STAT_BRK_DET) 283 tty_insert_flip_char(tport, 0, TTY_BREAK); 284 285 if (status & STAT_FRM_ERR) 286 tty_insert_flip_char(tport, 0, TTY_FRAME); 287 288 if (status & STAT_OVR_ERR) 289 tty_insert_flip_char(tport, 0, TTY_OVERRUN); 290 291 ignore_char: 292 status = readl(port->membase + UART_STAT); 293 } while (status & (STAT_RX_RDY(port) | STAT_BRK_DET)); 294 295 tty_flip_buffer_push(tport); 296 } 297 298 static void mvebu_uart_tx_chars(struct uart_port *port, unsigned int status) 299 { 300 struct circ_buf *xmit = &port->state->xmit; 301 unsigned int count; 302 unsigned int st; 303 304 if (port->x_char) { 305 writel(port->x_char, port->membase + UART_TSH(port)); 306 port->icount.tx++; 307 port->x_char = 0; 308 return; 309 } 310 311 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { 312 mvebu_uart_stop_tx(port); 313 return; 314 } 315 316 for (count = 0; count < port->fifosize; count++) { 317 writel(xmit->buf[xmit->tail], port->membase + UART_TSH(port)); 318 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); 319 port->icount.tx++; 320 321 if (uart_circ_empty(xmit)) 322 break; 323 324 st = readl(port->membase + UART_STAT); 325 if (st & STAT_TX_FIFO_FUL) 326 break; 327 } 328 329 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 330 uart_write_wakeup(port); 331 332 if (uart_circ_empty(xmit)) 333 mvebu_uart_stop_tx(port); 334 } 335 336 static irqreturn_t mvebu_uart_isr(int irq, void *dev_id) 337 { 338 struct uart_port *port = (struct uart_port *)dev_id; 339 unsigned int st = readl(port->membase + UART_STAT); 340 341 if (st & (STAT_RX_RDY(port) | STAT_OVR_ERR | STAT_FRM_ERR | 342 STAT_BRK_DET)) 343 mvebu_uart_rx_chars(port, st); 344 345 if (st & STAT_TX_RDY(port)) 346 mvebu_uart_tx_chars(port, st); 347 348 return IRQ_HANDLED; 349 } 350 351 static irqreturn_t mvebu_uart_rx_isr(int irq, void *dev_id) 352 { 353 struct uart_port *port = (struct uart_port *)dev_id; 354 unsigned int st = readl(port->membase + UART_STAT); 355 356 if (st & (STAT_RX_RDY(port) | STAT_OVR_ERR | STAT_FRM_ERR | 357 STAT_BRK_DET)) 358 mvebu_uart_rx_chars(port, st); 359 360 return IRQ_HANDLED; 361 } 362 363 static irqreturn_t mvebu_uart_tx_isr(int irq, void *dev_id) 364 { 365 struct uart_port *port = (struct uart_port *)dev_id; 366 unsigned int st = readl(port->membase + UART_STAT); 367 368 if (st & STAT_TX_RDY(port)) 369 mvebu_uart_tx_chars(port, st); 370 371 return IRQ_HANDLED; 372 } 373 374 static int mvebu_uart_startup(struct uart_port *port) 375 { 376 struct mvebu_uart *mvuart = to_mvuart(port); 377 unsigned int ctl; 378 int ret; 379 380 writel(CTRL_TXFIFO_RST | CTRL_RXFIFO_RST, 381 port->membase + UART_CTRL(port)); 382 udelay(1); 383 384 /* Clear the error bits of state register before IRQ request */ 385 ret = readl(port->membase + UART_STAT); 386 ret |= STAT_BRK_ERR; 387 writel(ret, port->membase + UART_STAT); 388 389 writel(CTRL_BRK_INT, port->membase + UART_CTRL(port)); 390 391 ctl = readl(port->membase + UART_INTR(port)); 392 ctl |= CTRL_RX_RDY_INT(port); 393 writel(ctl, port->membase + UART_INTR(port)); 394 395 if (!mvuart->irq[UART_TX_IRQ]) { 396 /* Old bindings with just one interrupt (UART0 only) */ 397 ret = devm_request_irq(port->dev, mvuart->irq[UART_IRQ_SUM], 398 mvebu_uart_isr, port->irqflags, 399 dev_name(port->dev), port); 400 if (ret) { 401 dev_err(port->dev, "unable to request IRQ %d\n", 402 mvuart->irq[UART_IRQ_SUM]); 403 return ret; 404 } 405 } else { 406 /* New bindings with an IRQ for RX and TX (both UART) */ 407 ret = devm_request_irq(port->dev, mvuart->irq[UART_RX_IRQ], 408 mvebu_uart_rx_isr, port->irqflags, 409 dev_name(port->dev), port); 410 if (ret) { 411 dev_err(port->dev, "unable to request IRQ %d\n", 412 mvuart->irq[UART_RX_IRQ]); 413 return ret; 414 } 415 416 ret = devm_request_irq(port->dev, mvuart->irq[UART_TX_IRQ], 417 mvebu_uart_tx_isr, port->irqflags, 418 dev_name(port->dev), 419 port); 420 if (ret) { 421 dev_err(port->dev, "unable to request IRQ %d\n", 422 mvuart->irq[UART_TX_IRQ]); 423 devm_free_irq(port->dev, mvuart->irq[UART_RX_IRQ], 424 port); 425 return ret; 426 } 427 } 428 429 return 0; 430 } 431 432 static void mvebu_uart_shutdown(struct uart_port *port) 433 { 434 struct mvebu_uart *mvuart = to_mvuart(port); 435 436 writel(0, port->membase + UART_INTR(port)); 437 438 if (!mvuart->irq[UART_TX_IRQ]) { 439 devm_free_irq(port->dev, mvuart->irq[UART_IRQ_SUM], port); 440 } else { 441 devm_free_irq(port->dev, mvuart->irq[UART_RX_IRQ], port); 442 devm_free_irq(port->dev, mvuart->irq[UART_TX_IRQ], port); 443 } 444 } 445 446 static int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud) 447 { 448 struct mvebu_uart *mvuart = to_mvuart(port); 449 unsigned int d_divisor, m_divisor; 450 u32 brdv, osamp; 451 452 if (IS_ERR(mvuart->clk)) 453 return -PTR_ERR(mvuart->clk); 454 455 /* 456 * The baudrate is derived from the UART clock thanks to two divisors: 457 * > D ("baud generator"): can divide the clock from 2 to 2^10 - 1. 458 * > M ("fractional divisor"): allows a better accuracy for 459 * baudrates higher than 230400. 460 * 461 * As the derivation of M is rather complicated, the code sticks to its 462 * default value (x16) when all the prescalers are zeroed, and only 463 * makes use of D to configure the desired baudrate. 464 */ 465 m_divisor = OSAMP_DEFAULT_DIVISOR; 466 d_divisor = DIV_ROUND_UP(port->uartclk, baud * m_divisor); 467 468 brdv = readl(port->membase + UART_BRDV); 469 brdv &= ~BRDV_BAUD_MASK; 470 brdv |= d_divisor; 471 writel(brdv, port->membase + UART_BRDV); 472 473 osamp = readl(port->membase + UART_OSAMP); 474 osamp &= ~OSAMP_DIVISORS_MASK; 475 writel(osamp, port->membase + UART_OSAMP); 476 477 return 0; 478 } 479 480 static void mvebu_uart_set_termios(struct uart_port *port, 481 struct ktermios *termios, 482 struct ktermios *old) 483 { 484 unsigned long flags; 485 unsigned int baud; 486 487 spin_lock_irqsave(&port->lock, flags); 488 489 port->read_status_mask = STAT_RX_RDY(port) | STAT_OVR_ERR | 490 STAT_TX_RDY(port) | STAT_TX_FIFO_FUL; 491 492 if (termios->c_iflag & INPCK) 493 port->read_status_mask |= STAT_FRM_ERR | STAT_PAR_ERR; 494 495 port->ignore_status_mask = 0; 496 if (termios->c_iflag & IGNPAR) 497 port->ignore_status_mask |= 498 STAT_FRM_ERR | STAT_PAR_ERR | STAT_OVR_ERR; 499 500 if ((termios->c_cflag & CREAD) == 0) 501 port->ignore_status_mask |= STAT_RX_RDY(port) | STAT_BRK_ERR; 502 503 /* 504 * Maximum achievable frequency with simple baudrate divisor is 230400. 505 * Since the error per bit frame would be of more than 15%, achieving 506 * higher frequencies would require to implement the fractional divisor 507 * feature. 508 */ 509 baud = uart_get_baud_rate(port, termios, old, 0, 230400); 510 if (mvebu_uart_baud_rate_set(port, baud)) { 511 /* No clock available, baudrate cannot be changed */ 512 if (old) 513 baud = uart_get_baud_rate(port, old, NULL, 0, 230400); 514 } else { 515 tty_termios_encode_baud_rate(termios, baud, baud); 516 uart_update_timeout(port, termios->c_cflag, baud); 517 } 518 519 /* Only the following flag changes are supported */ 520 if (old) { 521 termios->c_iflag &= INPCK | IGNPAR; 522 termios->c_iflag |= old->c_iflag & ~(INPCK | IGNPAR); 523 termios->c_cflag &= CREAD | CBAUD; 524 termios->c_cflag |= old->c_cflag & ~(CREAD | CBAUD); 525 termios->c_cflag |= CS8; 526 } 527 528 spin_unlock_irqrestore(&port->lock, flags); 529 } 530 531 static const char *mvebu_uart_type(struct uart_port *port) 532 { 533 return MVEBU_UART_TYPE; 534 } 535 536 static void mvebu_uart_release_port(struct uart_port *port) 537 { 538 /* Nothing to do here */ 539 } 540 541 static int mvebu_uart_request_port(struct uart_port *port) 542 { 543 return 0; 544 } 545 546 #ifdef CONFIG_CONSOLE_POLL 547 static int mvebu_uart_get_poll_char(struct uart_port *port) 548 { 549 unsigned int st = readl(port->membase + UART_STAT); 550 551 if (!(st & STAT_RX_RDY(port))) 552 return NO_POLL_CHAR; 553 554 return readl(port->membase + UART_RBR(port)); 555 } 556 557 static void mvebu_uart_put_poll_char(struct uart_port *port, unsigned char c) 558 { 559 unsigned int st; 560 561 for (;;) { 562 st = readl(port->membase + UART_STAT); 563 564 if (!(st & STAT_TX_FIFO_FUL)) 565 break; 566 567 udelay(1); 568 } 569 570 writel(c, port->membase + UART_TSH(port)); 571 } 572 #endif 573 574 static const struct uart_ops mvebu_uart_ops = { 575 .tx_empty = mvebu_uart_tx_empty, 576 .set_mctrl = mvebu_uart_set_mctrl, 577 .get_mctrl = mvebu_uart_get_mctrl, 578 .stop_tx = mvebu_uart_stop_tx, 579 .start_tx = mvebu_uart_start_tx, 580 .stop_rx = mvebu_uart_stop_rx, 581 .break_ctl = mvebu_uart_break_ctl, 582 .startup = mvebu_uart_startup, 583 .shutdown = mvebu_uart_shutdown, 584 .set_termios = mvebu_uart_set_termios, 585 .type = mvebu_uart_type, 586 .release_port = mvebu_uart_release_port, 587 .request_port = mvebu_uart_request_port, 588 #ifdef CONFIG_CONSOLE_POLL 589 .poll_get_char = mvebu_uart_get_poll_char, 590 .poll_put_char = mvebu_uart_put_poll_char, 591 #endif 592 }; 593 594 /* Console Driver Operations */ 595 596 #ifdef CONFIG_SERIAL_MVEBU_CONSOLE 597 /* Early Console */ 598 static void mvebu_uart_putc(struct uart_port *port, int c) 599 { 600 unsigned int st; 601 602 for (;;) { 603 st = readl(port->membase + UART_STAT); 604 if (!(st & STAT_TX_FIFO_FUL)) 605 break; 606 } 607 608 /* At early stage, DT is not parsed yet, only use UART0 */ 609 writel(c, port->membase + UART_STD_TSH); 610 611 for (;;) { 612 st = readl(port->membase + UART_STAT); 613 if (st & STAT_TX_FIFO_EMP) 614 break; 615 } 616 } 617 618 static void mvebu_uart_putc_early_write(struct console *con, 619 const char *s, 620 unsigned n) 621 { 622 struct earlycon_device *dev = con->data; 623 624 uart_console_write(&dev->port, s, n, mvebu_uart_putc); 625 } 626 627 static int __init 628 mvebu_uart_early_console_setup(struct earlycon_device *device, 629 const char *opt) 630 { 631 if (!device->port.membase) 632 return -ENODEV; 633 634 device->con->write = mvebu_uart_putc_early_write; 635 636 return 0; 637 } 638 639 EARLYCON_DECLARE(ar3700_uart, mvebu_uart_early_console_setup); 640 OF_EARLYCON_DECLARE(ar3700_uart, "marvell,armada-3700-uart", 641 mvebu_uart_early_console_setup); 642 643 static void wait_for_xmitr(struct uart_port *port) 644 { 645 u32 val; 646 647 readl_poll_timeout_atomic(port->membase + UART_STAT, val, 648 (val & STAT_TX_RDY(port)), 1, 10000); 649 } 650 651 static void mvebu_uart_console_putchar(struct uart_port *port, int ch) 652 { 653 wait_for_xmitr(port); 654 writel(ch, port->membase + UART_TSH(port)); 655 } 656 657 static void mvebu_uart_console_write(struct console *co, const char *s, 658 unsigned int count) 659 { 660 struct uart_port *port = &mvebu_uart_ports[co->index]; 661 unsigned long flags; 662 unsigned int ier, intr, ctl; 663 int locked = 1; 664 665 if (oops_in_progress) 666 locked = spin_trylock_irqsave(&port->lock, flags); 667 else 668 spin_lock_irqsave(&port->lock, flags); 669 670 ier = readl(port->membase + UART_CTRL(port)) & CTRL_BRK_INT; 671 intr = readl(port->membase + UART_INTR(port)) & 672 (CTRL_RX_RDY_INT(port) | CTRL_TX_RDY_INT(port)); 673 writel(0, port->membase + UART_CTRL(port)); 674 writel(0, port->membase + UART_INTR(port)); 675 676 uart_console_write(port, s, count, mvebu_uart_console_putchar); 677 678 wait_for_xmitr(port); 679 680 if (ier) 681 writel(ier, port->membase + UART_CTRL(port)); 682 683 if (intr) { 684 ctl = intr | readl(port->membase + UART_INTR(port)); 685 writel(ctl, port->membase + UART_INTR(port)); 686 } 687 688 if (locked) 689 spin_unlock_irqrestore(&port->lock, flags); 690 } 691 692 static int mvebu_uart_console_setup(struct console *co, char *options) 693 { 694 struct uart_port *port; 695 int baud = 9600; 696 int bits = 8; 697 int parity = 'n'; 698 int flow = 'n'; 699 700 if (co->index < 0 || co->index >= MVEBU_NR_UARTS) 701 return -EINVAL; 702 703 port = &mvebu_uart_ports[co->index]; 704 705 if (!port->mapbase || !port->membase) { 706 pr_debug("console on ttyMV%i not present\n", co->index); 707 return -ENODEV; 708 } 709 710 if (options) 711 uart_parse_options(options, &baud, &parity, &bits, &flow); 712 713 return uart_set_options(port, co, baud, parity, bits, flow); 714 } 715 716 static struct uart_driver mvebu_uart_driver; 717 718 static struct console mvebu_uart_console = { 719 .name = "ttyMV", 720 .write = mvebu_uart_console_write, 721 .device = uart_console_device, 722 .setup = mvebu_uart_console_setup, 723 .flags = CON_PRINTBUFFER, 724 .index = -1, 725 .data = &mvebu_uart_driver, 726 }; 727 728 static int __init mvebu_uart_console_init(void) 729 { 730 register_console(&mvebu_uart_console); 731 return 0; 732 } 733 734 console_initcall(mvebu_uart_console_init); 735 736 737 #endif /* CONFIG_SERIAL_MVEBU_CONSOLE */ 738 739 static struct uart_driver mvebu_uart_driver = { 740 .owner = THIS_MODULE, 741 .driver_name = DRIVER_NAME, 742 .dev_name = "ttyMV", 743 .nr = MVEBU_NR_UARTS, 744 #ifdef CONFIG_SERIAL_MVEBU_CONSOLE 745 .cons = &mvebu_uart_console, 746 #endif 747 }; 748 749 #if defined(CONFIG_PM) 750 static int mvebu_uart_suspend(struct device *dev) 751 { 752 struct mvebu_uart *mvuart = dev_get_drvdata(dev); 753 struct uart_port *port = mvuart->port; 754 755 uart_suspend_port(&mvebu_uart_driver, port); 756 757 mvuart->pm_regs.rbr = readl(port->membase + UART_RBR(port)); 758 mvuart->pm_regs.tsh = readl(port->membase + UART_TSH(port)); 759 mvuart->pm_regs.ctrl = readl(port->membase + UART_CTRL(port)); 760 mvuart->pm_regs.intr = readl(port->membase + UART_INTR(port)); 761 mvuart->pm_regs.stat = readl(port->membase + UART_STAT); 762 mvuart->pm_regs.brdv = readl(port->membase + UART_BRDV); 763 mvuart->pm_regs.osamp = readl(port->membase + UART_OSAMP); 764 765 device_set_wakeup_enable(dev, true); 766 767 return 0; 768 } 769 770 static int mvebu_uart_resume(struct device *dev) 771 { 772 struct mvebu_uart *mvuart = dev_get_drvdata(dev); 773 struct uart_port *port = mvuart->port; 774 775 writel(mvuart->pm_regs.rbr, port->membase + UART_RBR(port)); 776 writel(mvuart->pm_regs.tsh, port->membase + UART_TSH(port)); 777 writel(mvuart->pm_regs.ctrl, port->membase + UART_CTRL(port)); 778 writel(mvuart->pm_regs.intr, port->membase + UART_INTR(port)); 779 writel(mvuart->pm_regs.stat, port->membase + UART_STAT); 780 writel(mvuart->pm_regs.brdv, port->membase + UART_BRDV); 781 writel(mvuart->pm_regs.osamp, port->membase + UART_OSAMP); 782 783 uart_resume_port(&mvebu_uart_driver, port); 784 785 return 0; 786 } 787 788 static const struct dev_pm_ops mvebu_uart_pm_ops = { 789 .suspend = mvebu_uart_suspend, 790 .resume = mvebu_uart_resume, 791 }; 792 #endif /* CONFIG_PM */ 793 794 static const struct of_device_id mvebu_uart_of_match[]; 795 796 /* Counter to keep track of each UART port id when not using CONFIG_OF */ 797 static int uart_num_counter; 798 799 static int mvebu_uart_probe(struct platform_device *pdev) 800 { 801 struct resource *reg = platform_get_resource(pdev, IORESOURCE_MEM, 0); 802 const struct of_device_id *match = of_match_device(mvebu_uart_of_match, 803 &pdev->dev); 804 struct uart_port *port; 805 struct mvebu_uart *mvuart; 806 int ret, id, irq; 807 808 if (!reg) { 809 dev_err(&pdev->dev, "no registers defined\n"); 810 return -EINVAL; 811 } 812 813 if (!match) 814 return -ENODEV; 815 816 /* Assume that all UART ports have a DT alias or none has */ 817 id = of_alias_get_id(pdev->dev.of_node, "serial"); 818 if (!pdev->dev.of_node || id < 0) 819 pdev->id = uart_num_counter++; 820 else 821 pdev->id = id; 822 823 if (pdev->id >= MVEBU_NR_UARTS) { 824 dev_err(&pdev->dev, "cannot have more than %d UART ports\n", 825 MVEBU_NR_UARTS); 826 return -EINVAL; 827 } 828 829 port = &mvebu_uart_ports[pdev->id]; 830 831 spin_lock_init(&port->lock); 832 833 port->dev = &pdev->dev; 834 port->type = PORT_MVEBU; 835 port->ops = &mvebu_uart_ops; 836 port->regshift = 0; 837 838 port->fifosize = 32; 839 port->iotype = UPIO_MEM32; 840 port->flags = UPF_FIXED_PORT; 841 port->line = pdev->id; 842 843 /* 844 * IRQ number is not stored in this structure because we may have two of 845 * them per port (RX and TX). Instead, use the driver UART structure 846 * array so called ->irq[]. 847 */ 848 port->irq = 0; 849 port->irqflags = 0; 850 port->mapbase = reg->start; 851 852 port->membase = devm_ioremap_resource(&pdev->dev, reg); 853 if (IS_ERR(port->membase)) 854 return PTR_ERR(port->membase); 855 856 mvuart = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_uart), 857 GFP_KERNEL); 858 if (!mvuart) 859 return -ENOMEM; 860 861 /* Get controller data depending on the compatible string */ 862 mvuart->data = (struct mvebu_uart_driver_data *)match->data; 863 mvuart->port = port; 864 865 port->private_data = mvuart; 866 platform_set_drvdata(pdev, mvuart); 867 868 /* Get fixed clock frequency */ 869 mvuart->clk = devm_clk_get(&pdev->dev, NULL); 870 if (IS_ERR(mvuart->clk)) { 871 if (PTR_ERR(mvuart->clk) == -EPROBE_DEFER) 872 return PTR_ERR(mvuart->clk); 873 874 if (IS_EXTENDED(port)) { 875 dev_err(&pdev->dev, "unable to get UART clock\n"); 876 return PTR_ERR(mvuart->clk); 877 } 878 } else { 879 if (!clk_prepare_enable(mvuart->clk)) 880 port->uartclk = clk_get_rate(mvuart->clk); 881 } 882 883 /* Manage interrupts */ 884 if (platform_irq_count(pdev) == 1) { 885 /* Old bindings: no name on the single unamed UART0 IRQ */ 886 irq = platform_get_irq(pdev, 0); 887 if (irq < 0) 888 return irq; 889 890 mvuart->irq[UART_IRQ_SUM] = irq; 891 } else { 892 /* 893 * New bindings: named interrupts (RX, TX) for both UARTS, 894 * only make use of uart-rx and uart-tx interrupts, do not use 895 * uart-sum of UART0 port. 896 */ 897 irq = platform_get_irq_byname(pdev, "uart-rx"); 898 if (irq < 0) 899 return irq; 900 901 mvuart->irq[UART_RX_IRQ] = irq; 902 903 irq = platform_get_irq_byname(pdev, "uart-tx"); 904 if (irq < 0) 905 return irq; 906 907 mvuart->irq[UART_TX_IRQ] = irq; 908 } 909 910 /* UART Soft Reset*/ 911 writel(CTRL_SOFT_RST, port->membase + UART_CTRL(port)); 912 udelay(1); 913 writel(0, port->membase + UART_CTRL(port)); 914 915 ret = uart_add_one_port(&mvebu_uart_driver, port); 916 if (ret) 917 return ret; 918 return 0; 919 } 920 921 static struct mvebu_uart_driver_data uart_std_driver_data = { 922 .is_ext = false, 923 .regs.rbr = UART_STD_RBR, 924 .regs.tsh = UART_STD_TSH, 925 .regs.ctrl = UART_STD_CTRL1, 926 .regs.intr = UART_STD_CTRL2, 927 .flags.ctrl_tx_rdy_int = CTRL_STD_TX_RDY_INT, 928 .flags.ctrl_rx_rdy_int = CTRL_STD_RX_RDY_INT, 929 .flags.stat_tx_rdy = STAT_STD_TX_RDY, 930 .flags.stat_rx_rdy = STAT_STD_RX_RDY, 931 }; 932 933 static struct mvebu_uart_driver_data uart_ext_driver_data = { 934 .is_ext = true, 935 .regs.rbr = UART_EXT_RBR, 936 .regs.tsh = UART_EXT_TSH, 937 .regs.ctrl = UART_EXT_CTRL1, 938 .regs.intr = UART_EXT_CTRL2, 939 .flags.ctrl_tx_rdy_int = CTRL_EXT_TX_RDY_INT, 940 .flags.ctrl_rx_rdy_int = CTRL_EXT_RX_RDY_INT, 941 .flags.stat_tx_rdy = STAT_EXT_TX_RDY, 942 .flags.stat_rx_rdy = STAT_EXT_RX_RDY, 943 }; 944 945 /* Match table for of_platform binding */ 946 static const struct of_device_id mvebu_uart_of_match[] = { 947 { 948 .compatible = "marvell,armada-3700-uart", 949 .data = (void *)&uart_std_driver_data, 950 }, 951 { 952 .compatible = "marvell,armada-3700-uart-ext", 953 .data = (void *)&uart_ext_driver_data, 954 }, 955 {} 956 }; 957 958 static struct platform_driver mvebu_uart_platform_driver = { 959 .probe = mvebu_uart_probe, 960 .driver = { 961 .name = "mvebu-uart", 962 .of_match_table = of_match_ptr(mvebu_uart_of_match), 963 .suppress_bind_attrs = true, 964 #if defined(CONFIG_PM) 965 .pm = &mvebu_uart_pm_ops, 966 #endif /* CONFIG_PM */ 967 }, 968 }; 969 970 static int __init mvebu_uart_init(void) 971 { 972 int ret; 973 974 ret = uart_register_driver(&mvebu_uart_driver); 975 if (ret) 976 return ret; 977 978 ret = platform_driver_register(&mvebu_uart_platform_driver); 979 if (ret) 980 uart_unregister_driver(&mvebu_uart_driver); 981 982 return ret; 983 } 984 arch_initcall(mvebu_uart_init); 985