1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Driver for msm7k serial device and console
4 *
5 * Copyright (C) 2007 Google, Inc.
6 * Author: Robert Love <rlove@google.com>
7 * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
8 */
9
10 #include <linux/kernel.h>
11 #include <linux/atomic.h>
12 #include <linux/dma/qcom_adm.h>
13 #include <linux/dma-mapping.h>
14 #include <linux/dmaengine.h>
15 #include <linux/module.h>
16 #include <linux/io.h>
17 #include <linux/ioport.h>
18 #include <linux/interrupt.h>
19 #include <linux/init.h>
20 #include <linux/console.h>
21 #include <linux/tty.h>
22 #include <linux/tty_flip.h>
23 #include <linux/serial_core.h>
24 #include <linux/slab.h>
25 #include <linux/clk.h>
26 #include <linux/platform_device.h>
27 #include <linux/delay.h>
28 #include <linux/of.h>
29 #include <linux/of_device.h>
30 #include <linux/wait.h>
31
32 #define MSM_UART_MR1 0x0000
33
34 #define MSM_UART_MR1_AUTO_RFR_LEVEL0 0x3F
35 #define MSM_UART_MR1_AUTO_RFR_LEVEL1 0x3FF00
36 #define MSM_UART_DM_MR1_AUTO_RFR_LEVEL1 0xFFFFFF00
37 #define MSM_UART_MR1_RX_RDY_CTL BIT(7)
38 #define MSM_UART_MR1_CTS_CTL BIT(6)
39
40 #define MSM_UART_MR2 0x0004
41 #define MSM_UART_MR2_ERROR_MODE BIT(6)
42 #define MSM_UART_MR2_BITS_PER_CHAR 0x30
43 #define MSM_UART_MR2_BITS_PER_CHAR_5 (0x0 << 4)
44 #define MSM_UART_MR2_BITS_PER_CHAR_6 (0x1 << 4)
45 #define MSM_UART_MR2_BITS_PER_CHAR_7 (0x2 << 4)
46 #define MSM_UART_MR2_BITS_PER_CHAR_8 (0x3 << 4)
47 #define MSM_UART_MR2_STOP_BIT_LEN_ONE (0x1 << 2)
48 #define MSM_UART_MR2_STOP_BIT_LEN_TWO (0x3 << 2)
49 #define MSM_UART_MR2_PARITY_MODE_NONE 0x0
50 #define MSM_UART_MR2_PARITY_MODE_ODD 0x1
51 #define MSM_UART_MR2_PARITY_MODE_EVEN 0x2
52 #define MSM_UART_MR2_PARITY_MODE_SPACE 0x3
53 #define MSM_UART_MR2_PARITY_MODE 0x3
54
55 #define MSM_UART_CSR 0x0008
56
57 #define MSM_UART_TF 0x000C
58 #define UARTDM_TF 0x0070
59
60 #define MSM_UART_CR 0x0010
61 #define MSM_UART_CR_CMD_NULL (0 << 4)
62 #define MSM_UART_CR_CMD_RESET_RX (1 << 4)
63 #define MSM_UART_CR_CMD_RESET_TX (2 << 4)
64 #define MSM_UART_CR_CMD_RESET_ERR (3 << 4)
65 #define MSM_UART_CR_CMD_RESET_BREAK_INT (4 << 4)
66 #define MSM_UART_CR_CMD_START_BREAK (5 << 4)
67 #define MSM_UART_CR_CMD_STOP_BREAK (6 << 4)
68 #define MSM_UART_CR_CMD_RESET_CTS (7 << 4)
69 #define MSM_UART_CR_CMD_RESET_STALE_INT (8 << 4)
70 #define MSM_UART_CR_CMD_PACKET_MODE (9 << 4)
71 #define MSM_UART_CR_CMD_MODE_RESET (12 << 4)
72 #define MSM_UART_CR_CMD_SET_RFR (13 << 4)
73 #define MSM_UART_CR_CMD_RESET_RFR (14 << 4)
74 #define MSM_UART_CR_CMD_PROTECTION_EN (16 << 4)
75 #define MSM_UART_CR_CMD_STALE_EVENT_DISABLE (6 << 8)
76 #define MSM_UART_CR_CMD_STALE_EVENT_ENABLE (80 << 4)
77 #define MSM_UART_CR_CMD_FORCE_STALE (4 << 8)
78 #define MSM_UART_CR_CMD_RESET_TX_READY (3 << 8)
79 #define MSM_UART_CR_TX_DISABLE BIT(3)
80 #define MSM_UART_CR_TX_ENABLE BIT(2)
81 #define MSM_UART_CR_RX_DISABLE BIT(1)
82 #define MSM_UART_CR_RX_ENABLE BIT(0)
83 #define MSM_UART_CR_CMD_RESET_RXBREAK_START ((1 << 11) | (2 << 4))
84
85 #define MSM_UART_IMR 0x0014
86 #define MSM_UART_IMR_TXLEV BIT(0)
87 #define MSM_UART_IMR_RXSTALE BIT(3)
88 #define MSM_UART_IMR_RXLEV BIT(4)
89 #define MSM_UART_IMR_DELTA_CTS BIT(5)
90 #define MSM_UART_IMR_CURRENT_CTS BIT(6)
91 #define MSM_UART_IMR_RXBREAK_START BIT(10)
92
93 #define MSM_UART_IPR_RXSTALE_LAST 0x20
94 #define MSM_UART_IPR_STALE_LSB 0x1F
95 #define MSM_UART_IPR_STALE_TIMEOUT_MSB 0x3FF80
96 #define MSM_UART_DM_IPR_STALE_TIMEOUT_MSB 0xFFFFFF80
97
98 #define MSM_UART_IPR 0x0018
99 #define MSM_UART_TFWR 0x001C
100 #define MSM_UART_RFWR 0x0020
101 #define MSM_UART_HCR 0x0024
102
103 #define MSM_UART_MREG 0x0028
104 #define MSM_UART_NREG 0x002C
105 #define MSM_UART_DREG 0x0030
106 #define MSM_UART_MNDREG 0x0034
107 #define MSM_UART_IRDA 0x0038
108 #define MSM_UART_MISR_MODE 0x0040
109 #define MSM_UART_MISR_RESET 0x0044
110 #define MSM_UART_MISR_EXPORT 0x0048
111 #define MSM_UART_MISR_VAL 0x004C
112 #define MSM_UART_TEST_CTRL 0x0050
113
114 #define MSM_UART_SR 0x0008
115 #define MSM_UART_SR_HUNT_CHAR BIT(7)
116 #define MSM_UART_SR_RX_BREAK BIT(6)
117 #define MSM_UART_SR_PAR_FRAME_ERR BIT(5)
118 #define MSM_UART_SR_OVERRUN BIT(4)
119 #define MSM_UART_SR_TX_EMPTY BIT(3)
120 #define MSM_UART_SR_TX_READY BIT(2)
121 #define MSM_UART_SR_RX_FULL BIT(1)
122 #define MSM_UART_SR_RX_READY BIT(0)
123
124 #define MSM_UART_RF 0x000C
125 #define UARTDM_RF 0x0070
126 #define MSM_UART_MISR 0x0010
127 #define MSM_UART_ISR 0x0014
128 #define MSM_UART_ISR_TX_READY BIT(7)
129
130 #define UARTDM_RXFS 0x50
131 #define UARTDM_RXFS_BUF_SHIFT 0x7
132 #define UARTDM_RXFS_BUF_MASK 0x7
133
134 #define UARTDM_DMEN 0x3C
135 #define UARTDM_DMEN_RX_SC_ENABLE BIT(5)
136 #define UARTDM_DMEN_TX_SC_ENABLE BIT(4)
137
138 #define UARTDM_DMEN_TX_BAM_ENABLE BIT(2) /* UARTDM_1P4 */
139 #define UARTDM_DMEN_TX_DM_ENABLE BIT(0) /* < UARTDM_1P4 */
140
141 #define UARTDM_DMEN_RX_BAM_ENABLE BIT(3) /* UARTDM_1P4 */
142 #define UARTDM_DMEN_RX_DM_ENABLE BIT(1) /* < UARTDM_1P4 */
143
144 #define UARTDM_DMRX 0x34
145 #define UARTDM_NCF_TX 0x40
146 #define UARTDM_RX_TOTAL_SNAP 0x38
147
148 #define UARTDM_BURST_SIZE 16 /* in bytes */
149 #define UARTDM_TX_AIGN(x) ((x) & ~0x3) /* valid for > 1p3 */
150 #define UARTDM_TX_MAX 256 /* in bytes, valid for <= 1p3 */
151 #define UARTDM_RX_SIZE (UART_XMIT_SIZE / 4)
152
153 enum {
154 UARTDM_1P1 = 1,
155 UARTDM_1P2,
156 UARTDM_1P3,
157 UARTDM_1P4,
158 };
159
160 struct msm_dma {
161 struct dma_chan *chan;
162 enum dma_data_direction dir;
163 dma_addr_t phys;
164 unsigned char *virt;
165 dma_cookie_t cookie;
166 u32 enable_bit;
167 unsigned int count;
168 struct dma_async_tx_descriptor *desc;
169 };
170
171 struct msm_port {
172 struct uart_port uart;
173 char name[16];
174 struct clk *clk;
175 struct clk *pclk;
176 unsigned int imr;
177 int is_uartdm;
178 unsigned int old_snap_state;
179 bool break_detected;
180 struct msm_dma tx_dma;
181 struct msm_dma rx_dma;
182 };
183
to_msm_port(struct uart_port * up)184 static inline struct msm_port *to_msm_port(struct uart_port *up)
185 {
186 return container_of(up, struct msm_port, uart);
187 }
188
189 static
msm_write(struct uart_port * port,unsigned int val,unsigned int off)190 void msm_write(struct uart_port *port, unsigned int val, unsigned int off)
191 {
192 writel_relaxed(val, port->membase + off);
193 }
194
195 static
msm_read(struct uart_port * port,unsigned int off)196 unsigned int msm_read(struct uart_port *port, unsigned int off)
197 {
198 return readl_relaxed(port->membase + off);
199 }
200
201 /*
202 * Setup the MND registers to use the TCXO clock.
203 */
msm_serial_set_mnd_regs_tcxo(struct uart_port * port)204 static void msm_serial_set_mnd_regs_tcxo(struct uart_port *port)
205 {
206 msm_write(port, 0x06, MSM_UART_MREG);
207 msm_write(port, 0xF1, MSM_UART_NREG);
208 msm_write(port, 0x0F, MSM_UART_DREG);
209 msm_write(port, 0x1A, MSM_UART_MNDREG);
210 port->uartclk = 1843200;
211 }
212
213 /*
214 * Setup the MND registers to use the TCXO clock divided by 4.
215 */
msm_serial_set_mnd_regs_tcxoby4(struct uart_port * port)216 static void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port)
217 {
218 msm_write(port, 0x18, MSM_UART_MREG);
219 msm_write(port, 0xF6, MSM_UART_NREG);
220 msm_write(port, 0x0F, MSM_UART_DREG);
221 msm_write(port, 0x0A, MSM_UART_MNDREG);
222 port->uartclk = 1843200;
223 }
224
msm_serial_set_mnd_regs(struct uart_port * port)225 static void msm_serial_set_mnd_regs(struct uart_port *port)
226 {
227 struct msm_port *msm_port = to_msm_port(port);
228
229 /*
230 * These registers don't exist so we change the clk input rate
231 * on uartdm hardware instead
232 */
233 if (msm_port->is_uartdm)
234 return;
235
236 if (port->uartclk == 19200000)
237 msm_serial_set_mnd_regs_tcxo(port);
238 else if (port->uartclk == 4800000)
239 msm_serial_set_mnd_regs_tcxoby4(port);
240 }
241
242 static void msm_handle_tx(struct uart_port *port);
243 static void msm_start_rx_dma(struct msm_port *msm_port);
244
msm_stop_dma(struct uart_port * port,struct msm_dma * dma)245 static void msm_stop_dma(struct uart_port *port, struct msm_dma *dma)
246 {
247 struct device *dev = port->dev;
248 unsigned int mapped;
249 u32 val;
250
251 mapped = dma->count;
252 dma->count = 0;
253
254 dmaengine_terminate_all(dma->chan);
255
256 /*
257 * DMA Stall happens if enqueue and flush command happens concurrently.
258 * For example before changing the baud rate/protocol configuration and
259 * sending flush command to ADM, disable the channel of UARTDM.
260 * Note: should not reset the receiver here immediately as it is not
261 * suggested to do disable/reset or reset/disable at the same time.
262 */
263 val = msm_read(port, UARTDM_DMEN);
264 val &= ~dma->enable_bit;
265 msm_write(port, val, UARTDM_DMEN);
266
267 if (mapped)
268 dma_unmap_single(dev, dma->phys, mapped, dma->dir);
269 }
270
msm_release_dma(struct msm_port * msm_port)271 static void msm_release_dma(struct msm_port *msm_port)
272 {
273 struct msm_dma *dma;
274
275 dma = &msm_port->tx_dma;
276 if (dma->chan) {
277 msm_stop_dma(&msm_port->uart, dma);
278 dma_release_channel(dma->chan);
279 }
280
281 memset(dma, 0, sizeof(*dma));
282
283 dma = &msm_port->rx_dma;
284 if (dma->chan) {
285 msm_stop_dma(&msm_port->uart, dma);
286 dma_release_channel(dma->chan);
287 kfree(dma->virt);
288 }
289
290 memset(dma, 0, sizeof(*dma));
291 }
292
msm_request_tx_dma(struct msm_port * msm_port,resource_size_t base)293 static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base)
294 {
295 struct device *dev = msm_port->uart.dev;
296 struct dma_slave_config conf;
297 struct qcom_adm_peripheral_config periph_conf = {};
298 struct msm_dma *dma;
299 u32 crci = 0;
300 int ret;
301
302 dma = &msm_port->tx_dma;
303
304 /* allocate DMA resources, if available */
305 dma->chan = dma_request_chan(dev, "tx");
306 if (IS_ERR(dma->chan))
307 goto no_tx;
308
309 of_property_read_u32(dev->of_node, "qcom,tx-crci", &crci);
310
311 memset(&conf, 0, sizeof(conf));
312 conf.direction = DMA_MEM_TO_DEV;
313 conf.device_fc = true;
314 conf.dst_addr = base + UARTDM_TF;
315 conf.dst_maxburst = UARTDM_BURST_SIZE;
316 if (crci) {
317 conf.peripheral_config = &periph_conf;
318 conf.peripheral_size = sizeof(periph_conf);
319 periph_conf.crci = crci;
320 }
321
322 ret = dmaengine_slave_config(dma->chan, &conf);
323 if (ret)
324 goto rel_tx;
325
326 dma->dir = DMA_TO_DEVICE;
327
328 if (msm_port->is_uartdm < UARTDM_1P4)
329 dma->enable_bit = UARTDM_DMEN_TX_DM_ENABLE;
330 else
331 dma->enable_bit = UARTDM_DMEN_TX_BAM_ENABLE;
332
333 return;
334
335 rel_tx:
336 dma_release_channel(dma->chan);
337 no_tx:
338 memset(dma, 0, sizeof(*dma));
339 }
340
msm_request_rx_dma(struct msm_port * msm_port,resource_size_t base)341 static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base)
342 {
343 struct device *dev = msm_port->uart.dev;
344 struct dma_slave_config conf;
345 struct qcom_adm_peripheral_config periph_conf = {};
346 struct msm_dma *dma;
347 u32 crci = 0;
348 int ret;
349
350 dma = &msm_port->rx_dma;
351
352 /* allocate DMA resources, if available */
353 dma->chan = dma_request_chan(dev, "rx");
354 if (IS_ERR(dma->chan))
355 goto no_rx;
356
357 of_property_read_u32(dev->of_node, "qcom,rx-crci", &crci);
358
359 dma->virt = kzalloc(UARTDM_RX_SIZE, GFP_KERNEL);
360 if (!dma->virt)
361 goto rel_rx;
362
363 memset(&conf, 0, sizeof(conf));
364 conf.direction = DMA_DEV_TO_MEM;
365 conf.device_fc = true;
366 conf.src_addr = base + UARTDM_RF;
367 conf.src_maxburst = UARTDM_BURST_SIZE;
368 if (crci) {
369 conf.peripheral_config = &periph_conf;
370 conf.peripheral_size = sizeof(periph_conf);
371 periph_conf.crci = crci;
372 }
373
374 ret = dmaengine_slave_config(dma->chan, &conf);
375 if (ret)
376 goto err;
377
378 dma->dir = DMA_FROM_DEVICE;
379
380 if (msm_port->is_uartdm < UARTDM_1P4)
381 dma->enable_bit = UARTDM_DMEN_RX_DM_ENABLE;
382 else
383 dma->enable_bit = UARTDM_DMEN_RX_BAM_ENABLE;
384
385 return;
386 err:
387 kfree(dma->virt);
388 rel_rx:
389 dma_release_channel(dma->chan);
390 no_rx:
391 memset(dma, 0, sizeof(*dma));
392 }
393
msm_wait_for_xmitr(struct uart_port * port)394 static inline void msm_wait_for_xmitr(struct uart_port *port)
395 {
396 unsigned int timeout = 500000;
397
398 while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_EMPTY)) {
399 if (msm_read(port, MSM_UART_ISR) & MSM_UART_ISR_TX_READY)
400 break;
401 udelay(1);
402 if (!timeout--)
403 break;
404 }
405 msm_write(port, MSM_UART_CR_CMD_RESET_TX_READY, MSM_UART_CR);
406 }
407
msm_stop_tx(struct uart_port * port)408 static void msm_stop_tx(struct uart_port *port)
409 {
410 struct msm_port *msm_port = to_msm_port(port);
411
412 msm_port->imr &= ~MSM_UART_IMR_TXLEV;
413 msm_write(port, msm_port->imr, MSM_UART_IMR);
414 }
415
msm_start_tx(struct uart_port * port)416 static void msm_start_tx(struct uart_port *port)
417 {
418 struct msm_port *msm_port = to_msm_port(port);
419 struct msm_dma *dma = &msm_port->tx_dma;
420
421 /* Already started in DMA mode */
422 if (dma->count)
423 return;
424
425 msm_port->imr |= MSM_UART_IMR_TXLEV;
426 msm_write(port, msm_port->imr, MSM_UART_IMR);
427 }
428
msm_reset_dm_count(struct uart_port * port,int count)429 static void msm_reset_dm_count(struct uart_port *port, int count)
430 {
431 msm_wait_for_xmitr(port);
432 msm_write(port, count, UARTDM_NCF_TX);
433 msm_read(port, UARTDM_NCF_TX);
434 }
435
msm_complete_tx_dma(void * args)436 static void msm_complete_tx_dma(void *args)
437 {
438 struct msm_port *msm_port = args;
439 struct uart_port *port = &msm_port->uart;
440 struct circ_buf *xmit = &port->state->xmit;
441 struct msm_dma *dma = &msm_port->tx_dma;
442 struct dma_tx_state state;
443 unsigned long flags;
444 unsigned int count;
445 u32 val;
446
447 spin_lock_irqsave(&port->lock, flags);
448
449 /* Already stopped */
450 if (!dma->count)
451 goto done;
452
453 dmaengine_tx_status(dma->chan, dma->cookie, &state);
454
455 dma_unmap_single(port->dev, dma->phys, dma->count, dma->dir);
456
457 val = msm_read(port, UARTDM_DMEN);
458 val &= ~dma->enable_bit;
459 msm_write(port, val, UARTDM_DMEN);
460
461 if (msm_port->is_uartdm > UARTDM_1P3) {
462 msm_write(port, MSM_UART_CR_CMD_RESET_TX, MSM_UART_CR);
463 msm_write(port, MSM_UART_CR_TX_ENABLE, MSM_UART_CR);
464 }
465
466 count = dma->count - state.residue;
467 uart_xmit_advance(port, count);
468 dma->count = 0;
469
470 /* Restore "Tx FIFO below watermark" interrupt */
471 msm_port->imr |= MSM_UART_IMR_TXLEV;
472 msm_write(port, msm_port->imr, MSM_UART_IMR);
473
474 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
475 uart_write_wakeup(port);
476
477 msm_handle_tx(port);
478 done:
479 spin_unlock_irqrestore(&port->lock, flags);
480 }
481
msm_handle_tx_dma(struct msm_port * msm_port,unsigned int count)482 static int msm_handle_tx_dma(struct msm_port *msm_port, unsigned int count)
483 {
484 struct circ_buf *xmit = &msm_port->uart.state->xmit;
485 struct uart_port *port = &msm_port->uart;
486 struct msm_dma *dma = &msm_port->tx_dma;
487 void *cpu_addr;
488 int ret;
489 u32 val;
490
491 cpu_addr = &xmit->buf[xmit->tail];
492
493 dma->phys = dma_map_single(port->dev, cpu_addr, count, dma->dir);
494 ret = dma_mapping_error(port->dev, dma->phys);
495 if (ret)
496 return ret;
497
498 dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys,
499 count, DMA_MEM_TO_DEV,
500 DMA_PREP_INTERRUPT |
501 DMA_PREP_FENCE);
502 if (!dma->desc) {
503 ret = -EIO;
504 goto unmap;
505 }
506
507 dma->desc->callback = msm_complete_tx_dma;
508 dma->desc->callback_param = msm_port;
509
510 dma->cookie = dmaengine_submit(dma->desc);
511 ret = dma_submit_error(dma->cookie);
512 if (ret)
513 goto unmap;
514
515 /*
516 * Using DMA complete for Tx FIFO reload, no need for
517 * "Tx FIFO below watermark" one, disable it
518 */
519 msm_port->imr &= ~MSM_UART_IMR_TXLEV;
520 msm_write(port, msm_port->imr, MSM_UART_IMR);
521
522 dma->count = count;
523
524 val = msm_read(port, UARTDM_DMEN);
525 val |= dma->enable_bit;
526
527 if (msm_port->is_uartdm < UARTDM_1P4)
528 msm_write(port, val, UARTDM_DMEN);
529
530 msm_reset_dm_count(port, count);
531
532 if (msm_port->is_uartdm > UARTDM_1P3)
533 msm_write(port, val, UARTDM_DMEN);
534
535 dma_async_issue_pending(dma->chan);
536 return 0;
537 unmap:
538 dma_unmap_single(port->dev, dma->phys, count, dma->dir);
539 return ret;
540 }
541
msm_complete_rx_dma(void * args)542 static void msm_complete_rx_dma(void *args)
543 {
544 struct msm_port *msm_port = args;
545 struct uart_port *port = &msm_port->uart;
546 struct tty_port *tport = &port->state->port;
547 struct msm_dma *dma = &msm_port->rx_dma;
548 int count = 0, i, sysrq;
549 unsigned long flags;
550 u32 val;
551
552 spin_lock_irqsave(&port->lock, flags);
553
554 /* Already stopped */
555 if (!dma->count)
556 goto done;
557
558 val = msm_read(port, UARTDM_DMEN);
559 val &= ~dma->enable_bit;
560 msm_write(port, val, UARTDM_DMEN);
561
562 if (msm_read(port, MSM_UART_SR) & MSM_UART_SR_OVERRUN) {
563 port->icount.overrun++;
564 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
565 msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
566 }
567
568 count = msm_read(port, UARTDM_RX_TOTAL_SNAP);
569
570 port->icount.rx += count;
571
572 dma->count = 0;
573
574 dma_unmap_single(port->dev, dma->phys, UARTDM_RX_SIZE, dma->dir);
575
576 for (i = 0; i < count; i++) {
577 char flag = TTY_NORMAL;
578
579 if (msm_port->break_detected && dma->virt[i] == 0) {
580 port->icount.brk++;
581 flag = TTY_BREAK;
582 msm_port->break_detected = false;
583 if (uart_handle_break(port))
584 continue;
585 }
586
587 if (!(port->read_status_mask & MSM_UART_SR_RX_BREAK))
588 flag = TTY_NORMAL;
589
590 spin_unlock_irqrestore(&port->lock, flags);
591 sysrq = uart_handle_sysrq_char(port, dma->virt[i]);
592 spin_lock_irqsave(&port->lock, flags);
593 if (!sysrq)
594 tty_insert_flip_char(tport, dma->virt[i], flag);
595 }
596
597 msm_start_rx_dma(msm_port);
598 done:
599 spin_unlock_irqrestore(&port->lock, flags);
600
601 if (count)
602 tty_flip_buffer_push(tport);
603 }
604
msm_start_rx_dma(struct msm_port * msm_port)605 static void msm_start_rx_dma(struct msm_port *msm_port)
606 {
607 struct msm_dma *dma = &msm_port->rx_dma;
608 struct uart_port *uart = &msm_port->uart;
609 u32 val;
610 int ret;
611
612 if (IS_ENABLED(CONFIG_CONSOLE_POLL))
613 return;
614
615 if (!dma->chan)
616 return;
617
618 dma->phys = dma_map_single(uart->dev, dma->virt,
619 UARTDM_RX_SIZE, dma->dir);
620 ret = dma_mapping_error(uart->dev, dma->phys);
621 if (ret)
622 goto sw_mode;
623
624 dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys,
625 UARTDM_RX_SIZE, DMA_DEV_TO_MEM,
626 DMA_PREP_INTERRUPT);
627 if (!dma->desc)
628 goto unmap;
629
630 dma->desc->callback = msm_complete_rx_dma;
631 dma->desc->callback_param = msm_port;
632
633 dma->cookie = dmaengine_submit(dma->desc);
634 ret = dma_submit_error(dma->cookie);
635 if (ret)
636 goto unmap;
637 /*
638 * Using DMA for FIFO off-load, no need for "Rx FIFO over
639 * watermark" or "stale" interrupts, disable them
640 */
641 msm_port->imr &= ~(MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE);
642
643 /*
644 * Well, when DMA is ADM3 engine(implied by <= UARTDM v1.3),
645 * we need RXSTALE to flush input DMA fifo to memory
646 */
647 if (msm_port->is_uartdm < UARTDM_1P4)
648 msm_port->imr |= MSM_UART_IMR_RXSTALE;
649
650 msm_write(uart, msm_port->imr, MSM_UART_IMR);
651
652 dma->count = UARTDM_RX_SIZE;
653
654 dma_async_issue_pending(dma->chan);
655
656 msm_write(uart, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
657 msm_write(uart, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
658
659 val = msm_read(uart, UARTDM_DMEN);
660 val |= dma->enable_bit;
661
662 if (msm_port->is_uartdm < UARTDM_1P4)
663 msm_write(uart, val, UARTDM_DMEN);
664
665 msm_write(uart, UARTDM_RX_SIZE, UARTDM_DMRX);
666
667 if (msm_port->is_uartdm > UARTDM_1P3)
668 msm_write(uart, val, UARTDM_DMEN);
669
670 return;
671 unmap:
672 dma_unmap_single(uart->dev, dma->phys, UARTDM_RX_SIZE, dma->dir);
673
674 sw_mode:
675 /*
676 * Switch from DMA to SW/FIFO mode. After clearing Rx BAM (UARTDM_DMEN),
677 * receiver must be reset.
678 */
679 msm_write(uart, MSM_UART_CR_CMD_RESET_RX, MSM_UART_CR);
680 msm_write(uart, MSM_UART_CR_RX_ENABLE, MSM_UART_CR);
681
682 msm_write(uart, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
683 msm_write(uart, 0xFFFFFF, UARTDM_DMRX);
684 msm_write(uart, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
685
686 /* Re-enable RX interrupts */
687 msm_port->imr |= MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE;
688 msm_write(uart, msm_port->imr, MSM_UART_IMR);
689 }
690
msm_stop_rx(struct uart_port * port)691 static void msm_stop_rx(struct uart_port *port)
692 {
693 struct msm_port *msm_port = to_msm_port(port);
694 struct msm_dma *dma = &msm_port->rx_dma;
695
696 msm_port->imr &= ~(MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE);
697 msm_write(port, msm_port->imr, MSM_UART_IMR);
698
699 if (dma->chan)
700 msm_stop_dma(port, dma);
701 }
702
msm_enable_ms(struct uart_port * port)703 static void msm_enable_ms(struct uart_port *port)
704 {
705 struct msm_port *msm_port = to_msm_port(port);
706
707 msm_port->imr |= MSM_UART_IMR_DELTA_CTS;
708 msm_write(port, msm_port->imr, MSM_UART_IMR);
709 }
710
msm_handle_rx_dm(struct uart_port * port,unsigned int misr)711 static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr)
712 __must_hold(&port->lock)
713 {
714 struct tty_port *tport = &port->state->port;
715 unsigned int sr;
716 int count = 0;
717 struct msm_port *msm_port = to_msm_port(port);
718
719 if ((msm_read(port, MSM_UART_SR) & MSM_UART_SR_OVERRUN)) {
720 port->icount.overrun++;
721 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
722 msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
723 }
724
725 if (misr & MSM_UART_IMR_RXSTALE) {
726 count = msm_read(port, UARTDM_RX_TOTAL_SNAP) -
727 msm_port->old_snap_state;
728 msm_port->old_snap_state = 0;
729 } else {
730 count = 4 * (msm_read(port, MSM_UART_RFWR));
731 msm_port->old_snap_state += count;
732 }
733
734 /* TODO: Precise error reporting */
735
736 port->icount.rx += count;
737
738 while (count > 0) {
739 unsigned char buf[4];
740 int sysrq, r_count, i;
741
742 sr = msm_read(port, MSM_UART_SR);
743 if ((sr & MSM_UART_SR_RX_READY) == 0) {
744 msm_port->old_snap_state -= count;
745 break;
746 }
747
748 ioread32_rep(port->membase + UARTDM_RF, buf, 1);
749 r_count = min_t(int, count, sizeof(buf));
750
751 for (i = 0; i < r_count; i++) {
752 char flag = TTY_NORMAL;
753
754 if (msm_port->break_detected && buf[i] == 0) {
755 port->icount.brk++;
756 flag = TTY_BREAK;
757 msm_port->break_detected = false;
758 if (uart_handle_break(port))
759 continue;
760 }
761
762 if (!(port->read_status_mask & MSM_UART_SR_RX_BREAK))
763 flag = TTY_NORMAL;
764
765 spin_unlock(&port->lock);
766 sysrq = uart_handle_sysrq_char(port, buf[i]);
767 spin_lock(&port->lock);
768 if (!sysrq)
769 tty_insert_flip_char(tport, buf[i], flag);
770 }
771 count -= r_count;
772 }
773
774 tty_flip_buffer_push(tport);
775
776 if (misr & (MSM_UART_IMR_RXSTALE))
777 msm_write(port, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
778 msm_write(port, 0xFFFFFF, UARTDM_DMRX);
779 msm_write(port, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
780
781 /* Try to use DMA */
782 msm_start_rx_dma(msm_port);
783 }
784
msm_handle_rx(struct uart_port * port)785 static void msm_handle_rx(struct uart_port *port)
786 __must_hold(&port->lock)
787 {
788 struct tty_port *tport = &port->state->port;
789 unsigned int sr;
790
791 /*
792 * Handle overrun. My understanding of the hardware is that overrun
793 * is not tied to the RX buffer, so we handle the case out of band.
794 */
795 if ((msm_read(port, MSM_UART_SR) & MSM_UART_SR_OVERRUN)) {
796 port->icount.overrun++;
797 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
798 msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
799 }
800
801 /* and now the main RX loop */
802 while ((sr = msm_read(port, MSM_UART_SR)) & MSM_UART_SR_RX_READY) {
803 unsigned int c;
804 char flag = TTY_NORMAL;
805 int sysrq;
806
807 c = msm_read(port, MSM_UART_RF);
808
809 if (sr & MSM_UART_SR_RX_BREAK) {
810 port->icount.brk++;
811 if (uart_handle_break(port))
812 continue;
813 } else if (sr & MSM_UART_SR_PAR_FRAME_ERR) {
814 port->icount.frame++;
815 } else {
816 port->icount.rx++;
817 }
818
819 /* Mask conditions we're ignoring. */
820 sr &= port->read_status_mask;
821
822 if (sr & MSM_UART_SR_RX_BREAK)
823 flag = TTY_BREAK;
824 else if (sr & MSM_UART_SR_PAR_FRAME_ERR)
825 flag = TTY_FRAME;
826
827 spin_unlock(&port->lock);
828 sysrq = uart_handle_sysrq_char(port, c);
829 spin_lock(&port->lock);
830 if (!sysrq)
831 tty_insert_flip_char(tport, c, flag);
832 }
833
834 tty_flip_buffer_push(tport);
835 }
836
msm_handle_tx_pio(struct uart_port * port,unsigned int tx_count)837 static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count)
838 {
839 struct circ_buf *xmit = &port->state->xmit;
840 struct msm_port *msm_port = to_msm_port(port);
841 unsigned int num_chars;
842 unsigned int tf_pointer = 0;
843 void __iomem *tf;
844
845 if (msm_port->is_uartdm)
846 tf = port->membase + UARTDM_TF;
847 else
848 tf = port->membase + MSM_UART_TF;
849
850 if (tx_count && msm_port->is_uartdm)
851 msm_reset_dm_count(port, tx_count);
852
853 while (tf_pointer < tx_count) {
854 int i;
855 char buf[4] = { 0 };
856
857 if (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
858 break;
859
860 if (msm_port->is_uartdm)
861 num_chars = min(tx_count - tf_pointer,
862 (unsigned int)sizeof(buf));
863 else
864 num_chars = 1;
865
866 for (i = 0; i < num_chars; i++)
867 buf[i] = xmit->buf[xmit->tail + i];
868
869 iowrite32_rep(tf, buf, 1);
870 uart_xmit_advance(port, num_chars);
871 tf_pointer += num_chars;
872 }
873
874 /* disable tx interrupts if nothing more to send */
875 if (uart_circ_empty(xmit))
876 msm_stop_tx(port);
877
878 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
879 uart_write_wakeup(port);
880 }
881
msm_handle_tx(struct uart_port * port)882 static void msm_handle_tx(struct uart_port *port)
883 {
884 struct msm_port *msm_port = to_msm_port(port);
885 struct circ_buf *xmit = &msm_port->uart.state->xmit;
886 struct msm_dma *dma = &msm_port->tx_dma;
887 unsigned int pio_count, dma_count, dma_min;
888 char buf[4] = { 0 };
889 void __iomem *tf;
890 int err = 0;
891
892 if (port->x_char) {
893 if (msm_port->is_uartdm)
894 tf = port->membase + UARTDM_TF;
895 else
896 tf = port->membase + MSM_UART_TF;
897
898 buf[0] = port->x_char;
899
900 if (msm_port->is_uartdm)
901 msm_reset_dm_count(port, 1);
902
903 iowrite32_rep(tf, buf, 1);
904 port->icount.tx++;
905 port->x_char = 0;
906 return;
907 }
908
909 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
910 msm_stop_tx(port);
911 return;
912 }
913
914 pio_count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
915 dma_count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
916
917 dma_min = 1; /* Always DMA */
918 if (msm_port->is_uartdm > UARTDM_1P3) {
919 dma_count = UARTDM_TX_AIGN(dma_count);
920 dma_min = UARTDM_BURST_SIZE;
921 } else {
922 if (dma_count > UARTDM_TX_MAX)
923 dma_count = UARTDM_TX_MAX;
924 }
925
926 if (pio_count > port->fifosize)
927 pio_count = port->fifosize;
928
929 if (!dma->chan || dma_count < dma_min)
930 msm_handle_tx_pio(port, pio_count);
931 else
932 err = msm_handle_tx_dma(msm_port, dma_count);
933
934 if (err) /* fall back to PIO mode */
935 msm_handle_tx_pio(port, pio_count);
936 }
937
msm_handle_delta_cts(struct uart_port * port)938 static void msm_handle_delta_cts(struct uart_port *port)
939 {
940 msm_write(port, MSM_UART_CR_CMD_RESET_CTS, MSM_UART_CR);
941 port->icount.cts++;
942 wake_up_interruptible(&port->state->port.delta_msr_wait);
943 }
944
msm_uart_irq(int irq,void * dev_id)945 static irqreturn_t msm_uart_irq(int irq, void *dev_id)
946 {
947 struct uart_port *port = dev_id;
948 struct msm_port *msm_port = to_msm_port(port);
949 struct msm_dma *dma = &msm_port->rx_dma;
950 unsigned long flags;
951 unsigned int misr;
952 u32 val;
953
954 spin_lock_irqsave(&port->lock, flags);
955 misr = msm_read(port, MSM_UART_MISR);
956 msm_write(port, 0, MSM_UART_IMR); /* disable interrupt */
957
958 if (misr & MSM_UART_IMR_RXBREAK_START) {
959 msm_port->break_detected = true;
960 msm_write(port, MSM_UART_CR_CMD_RESET_RXBREAK_START, MSM_UART_CR);
961 }
962
963 if (misr & (MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE)) {
964 if (dma->count) {
965 val = MSM_UART_CR_CMD_STALE_EVENT_DISABLE;
966 msm_write(port, val, MSM_UART_CR);
967 val = MSM_UART_CR_CMD_RESET_STALE_INT;
968 msm_write(port, val, MSM_UART_CR);
969 /*
970 * Flush DMA input fifo to memory, this will also
971 * trigger DMA RX completion
972 */
973 dmaengine_terminate_all(dma->chan);
974 } else if (msm_port->is_uartdm) {
975 msm_handle_rx_dm(port, misr);
976 } else {
977 msm_handle_rx(port);
978 }
979 }
980 if (misr & MSM_UART_IMR_TXLEV)
981 msm_handle_tx(port);
982 if (misr & MSM_UART_IMR_DELTA_CTS)
983 msm_handle_delta_cts(port);
984
985 msm_write(port, msm_port->imr, MSM_UART_IMR); /* restore interrupt */
986 spin_unlock_irqrestore(&port->lock, flags);
987
988 return IRQ_HANDLED;
989 }
990
msm_tx_empty(struct uart_port * port)991 static unsigned int msm_tx_empty(struct uart_port *port)
992 {
993 return (msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0;
994 }
995
msm_get_mctrl(struct uart_port * port)996 static unsigned int msm_get_mctrl(struct uart_port *port)
997 {
998 return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS;
999 }
1000
msm_reset(struct uart_port * port)1001 static void msm_reset(struct uart_port *port)
1002 {
1003 struct msm_port *msm_port = to_msm_port(port);
1004 unsigned int mr;
1005
1006 /* reset everything */
1007 msm_write(port, MSM_UART_CR_CMD_RESET_RX, MSM_UART_CR);
1008 msm_write(port, MSM_UART_CR_CMD_RESET_TX, MSM_UART_CR);
1009 msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
1010 msm_write(port, MSM_UART_CR_CMD_RESET_BREAK_INT, MSM_UART_CR);
1011 msm_write(port, MSM_UART_CR_CMD_RESET_CTS, MSM_UART_CR);
1012 msm_write(port, MSM_UART_CR_CMD_RESET_RFR, MSM_UART_CR);
1013 mr = msm_read(port, MSM_UART_MR1);
1014 mr &= ~MSM_UART_MR1_RX_RDY_CTL;
1015 msm_write(port, mr, MSM_UART_MR1);
1016
1017 /* Disable DM modes */
1018 if (msm_port->is_uartdm)
1019 msm_write(port, 0, UARTDM_DMEN);
1020 }
1021
msm_set_mctrl(struct uart_port * port,unsigned int mctrl)1022 static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl)
1023 {
1024 unsigned int mr;
1025
1026 mr = msm_read(port, MSM_UART_MR1);
1027
1028 if (!(mctrl & TIOCM_RTS)) {
1029 mr &= ~MSM_UART_MR1_RX_RDY_CTL;
1030 msm_write(port, mr, MSM_UART_MR1);
1031 msm_write(port, MSM_UART_CR_CMD_RESET_RFR, MSM_UART_CR);
1032 } else {
1033 mr |= MSM_UART_MR1_RX_RDY_CTL;
1034 msm_write(port, mr, MSM_UART_MR1);
1035 }
1036 }
1037
msm_break_ctl(struct uart_port * port,int break_ctl)1038 static void msm_break_ctl(struct uart_port *port, int break_ctl)
1039 {
1040 if (break_ctl)
1041 msm_write(port, MSM_UART_CR_CMD_START_BREAK, MSM_UART_CR);
1042 else
1043 msm_write(port, MSM_UART_CR_CMD_STOP_BREAK, MSM_UART_CR);
1044 }
1045
1046 struct msm_baud_map {
1047 u16 divisor;
1048 u8 code;
1049 u8 rxstale;
1050 };
1051
1052 static const struct msm_baud_map *
msm_find_best_baud(struct uart_port * port,unsigned int baud,unsigned long * rate)1053 msm_find_best_baud(struct uart_port *port, unsigned int baud,
1054 unsigned long *rate)
1055 {
1056 struct msm_port *msm_port = to_msm_port(port);
1057 unsigned int divisor, result;
1058 unsigned long target, old, best_rate = 0, diff, best_diff = ULONG_MAX;
1059 const struct msm_baud_map *entry, *end, *best;
1060 static const struct msm_baud_map table[] = {
1061 { 1, 0xff, 31 },
1062 { 2, 0xee, 16 },
1063 { 3, 0xdd, 8 },
1064 { 4, 0xcc, 6 },
1065 { 6, 0xbb, 6 },
1066 { 8, 0xaa, 6 },
1067 { 12, 0x99, 6 },
1068 { 16, 0x88, 1 },
1069 { 24, 0x77, 1 },
1070 { 32, 0x66, 1 },
1071 { 48, 0x55, 1 },
1072 { 96, 0x44, 1 },
1073 { 192, 0x33, 1 },
1074 { 384, 0x22, 1 },
1075 { 768, 0x11, 1 },
1076 { 1536, 0x00, 1 },
1077 };
1078
1079 best = table; /* Default to smallest divider */
1080 target = clk_round_rate(msm_port->clk, 16 * baud);
1081 divisor = DIV_ROUND_CLOSEST(target, 16 * baud);
1082
1083 end = table + ARRAY_SIZE(table);
1084 entry = table;
1085 while (entry < end) {
1086 if (entry->divisor <= divisor) {
1087 result = target / entry->divisor / 16;
1088 diff = abs(result - baud);
1089
1090 /* Keep track of best entry */
1091 if (diff < best_diff) {
1092 best_diff = diff;
1093 best = entry;
1094 best_rate = target;
1095 }
1096
1097 if (result == baud)
1098 break;
1099 } else if (entry->divisor > divisor) {
1100 old = target;
1101 target = clk_round_rate(msm_port->clk, old + 1);
1102 /*
1103 * The rate didn't get any faster so we can't do
1104 * better at dividing it down
1105 */
1106 if (target == old)
1107 break;
1108
1109 /* Start the divisor search over at this new rate */
1110 entry = table;
1111 divisor = DIV_ROUND_CLOSEST(target, 16 * baud);
1112 continue;
1113 }
1114 entry++;
1115 }
1116
1117 *rate = best_rate;
1118 return best;
1119 }
1120
msm_set_baud_rate(struct uart_port * port,unsigned int baud,unsigned long * saved_flags)1121 static int msm_set_baud_rate(struct uart_port *port, unsigned int baud,
1122 unsigned long *saved_flags)
1123 __must_hold(&port->lock)
1124 {
1125 unsigned int rxstale, watermark, mask;
1126 struct msm_port *msm_port = to_msm_port(port);
1127 const struct msm_baud_map *entry;
1128 unsigned long flags, rate;
1129
1130 flags = *saved_flags;
1131 spin_unlock_irqrestore(&port->lock, flags);
1132
1133 entry = msm_find_best_baud(port, baud, &rate);
1134 clk_set_rate(msm_port->clk, rate);
1135 baud = rate / 16 / entry->divisor;
1136
1137 spin_lock_irqsave(&port->lock, flags);
1138 *saved_flags = flags;
1139 port->uartclk = rate;
1140
1141 msm_write(port, entry->code, MSM_UART_CSR);
1142
1143 /* RX stale watermark */
1144 rxstale = entry->rxstale;
1145 watermark = MSM_UART_IPR_STALE_LSB & rxstale;
1146 if (msm_port->is_uartdm) {
1147 mask = MSM_UART_DM_IPR_STALE_TIMEOUT_MSB;
1148 } else {
1149 watermark |= MSM_UART_IPR_RXSTALE_LAST;
1150 mask = MSM_UART_IPR_STALE_TIMEOUT_MSB;
1151 }
1152
1153 watermark |= mask & (rxstale << 2);
1154
1155 msm_write(port, watermark, MSM_UART_IPR);
1156
1157 /* set RX watermark */
1158 watermark = (port->fifosize * 3) / 4;
1159 msm_write(port, watermark, MSM_UART_RFWR);
1160
1161 /* set TX watermark */
1162 msm_write(port, 10, MSM_UART_TFWR);
1163
1164 msm_write(port, MSM_UART_CR_CMD_PROTECTION_EN, MSM_UART_CR);
1165 msm_reset(port);
1166
1167 /* Enable RX and TX */
1168 msm_write(port, MSM_UART_CR_TX_ENABLE | MSM_UART_CR_RX_ENABLE, MSM_UART_CR);
1169
1170 /* turn on RX and CTS interrupts */
1171 msm_port->imr = MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE |
1172 MSM_UART_IMR_CURRENT_CTS | MSM_UART_IMR_RXBREAK_START;
1173
1174 msm_write(port, msm_port->imr, MSM_UART_IMR);
1175
1176 if (msm_port->is_uartdm) {
1177 msm_write(port, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
1178 msm_write(port, 0xFFFFFF, UARTDM_DMRX);
1179 msm_write(port, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
1180 }
1181
1182 return baud;
1183 }
1184
msm_init_clock(struct uart_port * port)1185 static void msm_init_clock(struct uart_port *port)
1186 {
1187 struct msm_port *msm_port = to_msm_port(port);
1188
1189 clk_prepare_enable(msm_port->clk);
1190 clk_prepare_enable(msm_port->pclk);
1191 msm_serial_set_mnd_regs(port);
1192 }
1193
msm_startup(struct uart_port * port)1194 static int msm_startup(struct uart_port *port)
1195 {
1196 struct msm_port *msm_port = to_msm_port(port);
1197 unsigned int data, rfr_level, mask;
1198 int ret;
1199
1200 snprintf(msm_port->name, sizeof(msm_port->name),
1201 "msm_serial%d", port->line);
1202
1203 msm_init_clock(port);
1204
1205 if (likely(port->fifosize > 12))
1206 rfr_level = port->fifosize - 12;
1207 else
1208 rfr_level = port->fifosize;
1209
1210 /* set automatic RFR level */
1211 data = msm_read(port, MSM_UART_MR1);
1212
1213 if (msm_port->is_uartdm)
1214 mask = MSM_UART_DM_MR1_AUTO_RFR_LEVEL1;
1215 else
1216 mask = MSM_UART_MR1_AUTO_RFR_LEVEL1;
1217
1218 data &= ~mask;
1219 data &= ~MSM_UART_MR1_AUTO_RFR_LEVEL0;
1220 data |= mask & (rfr_level << 2);
1221 data |= MSM_UART_MR1_AUTO_RFR_LEVEL0 & rfr_level;
1222 msm_write(port, data, MSM_UART_MR1);
1223
1224 if (msm_port->is_uartdm) {
1225 msm_request_tx_dma(msm_port, msm_port->uart.mapbase);
1226 msm_request_rx_dma(msm_port, msm_port->uart.mapbase);
1227 }
1228
1229 ret = request_irq(port->irq, msm_uart_irq, IRQF_TRIGGER_HIGH,
1230 msm_port->name, port);
1231 if (unlikely(ret))
1232 goto err_irq;
1233
1234 return 0;
1235
1236 err_irq:
1237 if (msm_port->is_uartdm)
1238 msm_release_dma(msm_port);
1239
1240 clk_disable_unprepare(msm_port->pclk);
1241 clk_disable_unprepare(msm_port->clk);
1242
1243 return ret;
1244 }
1245
msm_shutdown(struct uart_port * port)1246 static void msm_shutdown(struct uart_port *port)
1247 {
1248 struct msm_port *msm_port = to_msm_port(port);
1249
1250 msm_port->imr = 0;
1251 msm_write(port, 0, MSM_UART_IMR); /* disable interrupts */
1252
1253 if (msm_port->is_uartdm)
1254 msm_release_dma(msm_port);
1255
1256 clk_disable_unprepare(msm_port->clk);
1257
1258 free_irq(port->irq, port);
1259 }
1260
msm_set_termios(struct uart_port * port,struct ktermios * termios,const struct ktermios * old)1261 static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
1262 const struct ktermios *old)
1263 {
1264 struct msm_port *msm_port = to_msm_port(port);
1265 struct msm_dma *dma = &msm_port->rx_dma;
1266 unsigned long flags;
1267 unsigned int baud, mr;
1268
1269 spin_lock_irqsave(&port->lock, flags);
1270
1271 if (dma->chan) /* Terminate if any */
1272 msm_stop_dma(port, dma);
1273
1274 /* calculate and set baud rate */
1275 baud = uart_get_baud_rate(port, termios, old, 300, 4000000);
1276 baud = msm_set_baud_rate(port, baud, &flags);
1277 if (tty_termios_baud_rate(termios))
1278 tty_termios_encode_baud_rate(termios, baud, baud);
1279
1280 /* calculate parity */
1281 mr = msm_read(port, MSM_UART_MR2);
1282 mr &= ~MSM_UART_MR2_PARITY_MODE;
1283 if (termios->c_cflag & PARENB) {
1284 if (termios->c_cflag & PARODD)
1285 mr |= MSM_UART_MR2_PARITY_MODE_ODD;
1286 else if (termios->c_cflag & CMSPAR)
1287 mr |= MSM_UART_MR2_PARITY_MODE_SPACE;
1288 else
1289 mr |= MSM_UART_MR2_PARITY_MODE_EVEN;
1290 }
1291
1292 /* calculate bits per char */
1293 mr &= ~MSM_UART_MR2_BITS_PER_CHAR;
1294 switch (termios->c_cflag & CSIZE) {
1295 case CS5:
1296 mr |= MSM_UART_MR2_BITS_PER_CHAR_5;
1297 break;
1298 case CS6:
1299 mr |= MSM_UART_MR2_BITS_PER_CHAR_6;
1300 break;
1301 case CS7:
1302 mr |= MSM_UART_MR2_BITS_PER_CHAR_7;
1303 break;
1304 case CS8:
1305 default:
1306 mr |= MSM_UART_MR2_BITS_PER_CHAR_8;
1307 break;
1308 }
1309
1310 /* calculate stop bits */
1311 mr &= ~(MSM_UART_MR2_STOP_BIT_LEN_ONE | MSM_UART_MR2_STOP_BIT_LEN_TWO);
1312 if (termios->c_cflag & CSTOPB)
1313 mr |= MSM_UART_MR2_STOP_BIT_LEN_TWO;
1314 else
1315 mr |= MSM_UART_MR2_STOP_BIT_LEN_ONE;
1316
1317 /* set parity, bits per char, and stop bit */
1318 msm_write(port, mr, MSM_UART_MR2);
1319
1320 /* calculate and set hardware flow control */
1321 mr = msm_read(port, MSM_UART_MR1);
1322 mr &= ~(MSM_UART_MR1_CTS_CTL | MSM_UART_MR1_RX_RDY_CTL);
1323 if (termios->c_cflag & CRTSCTS) {
1324 mr |= MSM_UART_MR1_CTS_CTL;
1325 mr |= MSM_UART_MR1_RX_RDY_CTL;
1326 }
1327 msm_write(port, mr, MSM_UART_MR1);
1328
1329 /* Configure status bits to ignore based on termio flags. */
1330 port->read_status_mask = 0;
1331 if (termios->c_iflag & INPCK)
1332 port->read_status_mask |= MSM_UART_SR_PAR_FRAME_ERR;
1333 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
1334 port->read_status_mask |= MSM_UART_SR_RX_BREAK;
1335
1336 uart_update_timeout(port, termios->c_cflag, baud);
1337
1338 /* Try to use DMA */
1339 msm_start_rx_dma(msm_port);
1340
1341 spin_unlock_irqrestore(&port->lock, flags);
1342 }
1343
msm_type(struct uart_port * port)1344 static const char *msm_type(struct uart_port *port)
1345 {
1346 return "MSM";
1347 }
1348
msm_release_port(struct uart_port * port)1349 static void msm_release_port(struct uart_port *port)
1350 {
1351 struct platform_device *pdev = to_platform_device(port->dev);
1352 struct resource *uart_resource;
1353 resource_size_t size;
1354
1355 uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1356 if (unlikely(!uart_resource))
1357 return;
1358 size = resource_size(uart_resource);
1359
1360 release_mem_region(port->mapbase, size);
1361 iounmap(port->membase);
1362 port->membase = NULL;
1363 }
1364
msm_request_port(struct uart_port * port)1365 static int msm_request_port(struct uart_port *port)
1366 {
1367 struct platform_device *pdev = to_platform_device(port->dev);
1368 struct resource *uart_resource;
1369 resource_size_t size;
1370 int ret;
1371
1372 uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1373 if (unlikely(!uart_resource))
1374 return -ENXIO;
1375
1376 size = resource_size(uart_resource);
1377
1378 if (!request_mem_region(port->mapbase, size, "msm_serial"))
1379 return -EBUSY;
1380
1381 port->membase = ioremap(port->mapbase, size);
1382 if (!port->membase) {
1383 ret = -EBUSY;
1384 goto fail_release_port;
1385 }
1386
1387 return 0;
1388
1389 fail_release_port:
1390 release_mem_region(port->mapbase, size);
1391 return ret;
1392 }
1393
msm_config_port(struct uart_port * port,int flags)1394 static void msm_config_port(struct uart_port *port, int flags)
1395 {
1396 int ret;
1397
1398 if (flags & UART_CONFIG_TYPE) {
1399 port->type = PORT_MSM;
1400 ret = msm_request_port(port);
1401 if (ret)
1402 return;
1403 }
1404 }
1405
msm_verify_port(struct uart_port * port,struct serial_struct * ser)1406 static int msm_verify_port(struct uart_port *port, struct serial_struct *ser)
1407 {
1408 if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM))
1409 return -EINVAL;
1410 if (unlikely(port->irq != ser->irq))
1411 return -EINVAL;
1412 return 0;
1413 }
1414
msm_power(struct uart_port * port,unsigned int state,unsigned int oldstate)1415 static void msm_power(struct uart_port *port, unsigned int state,
1416 unsigned int oldstate)
1417 {
1418 struct msm_port *msm_port = to_msm_port(port);
1419
1420 switch (state) {
1421 case 0:
1422 clk_prepare_enable(msm_port->clk);
1423 clk_prepare_enable(msm_port->pclk);
1424 break;
1425 case 3:
1426 clk_disable_unprepare(msm_port->clk);
1427 clk_disable_unprepare(msm_port->pclk);
1428 break;
1429 default:
1430 pr_err("msm_serial: Unknown PM state %d\n", state);
1431 }
1432 }
1433
1434 #ifdef CONFIG_CONSOLE_POLL
msm_poll_get_char_single(struct uart_port * port)1435 static int msm_poll_get_char_single(struct uart_port *port)
1436 {
1437 struct msm_port *msm_port = to_msm_port(port);
1438 unsigned int rf_reg = msm_port->is_uartdm ? UARTDM_RF : MSM_UART_RF;
1439
1440 if (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_RX_READY))
1441 return NO_POLL_CHAR;
1442
1443 return msm_read(port, rf_reg) & 0xff;
1444 }
1445
msm_poll_get_char_dm(struct uart_port * port)1446 static int msm_poll_get_char_dm(struct uart_port *port)
1447 {
1448 int c;
1449 static u32 slop;
1450 static int count;
1451 unsigned char *sp = (unsigned char *)&slop;
1452
1453 /* Check if a previous read had more than one char */
1454 if (count) {
1455 c = sp[sizeof(slop) - count];
1456 count--;
1457 /* Or if FIFO is empty */
1458 } else if (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_RX_READY)) {
1459 /*
1460 * If RX packing buffer has less than a word, force stale to
1461 * push contents into RX FIFO
1462 */
1463 count = msm_read(port, UARTDM_RXFS);
1464 count = (count >> UARTDM_RXFS_BUF_SHIFT) & UARTDM_RXFS_BUF_MASK;
1465 if (count) {
1466 msm_write(port, MSM_UART_CR_CMD_FORCE_STALE, MSM_UART_CR);
1467 slop = msm_read(port, UARTDM_RF);
1468 c = sp[0];
1469 count--;
1470 msm_write(port, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
1471 msm_write(port, 0xFFFFFF, UARTDM_DMRX);
1472 msm_write(port, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
1473 } else {
1474 c = NO_POLL_CHAR;
1475 }
1476 /* FIFO has a word */
1477 } else {
1478 slop = msm_read(port, UARTDM_RF);
1479 c = sp[0];
1480 count = sizeof(slop) - 1;
1481 }
1482
1483 return c;
1484 }
1485
msm_poll_get_char(struct uart_port * port)1486 static int msm_poll_get_char(struct uart_port *port)
1487 {
1488 u32 imr;
1489 int c;
1490 struct msm_port *msm_port = to_msm_port(port);
1491
1492 /* Disable all interrupts */
1493 imr = msm_read(port, MSM_UART_IMR);
1494 msm_write(port, 0, MSM_UART_IMR);
1495
1496 if (msm_port->is_uartdm)
1497 c = msm_poll_get_char_dm(port);
1498 else
1499 c = msm_poll_get_char_single(port);
1500
1501 /* Enable interrupts */
1502 msm_write(port, imr, MSM_UART_IMR);
1503
1504 return c;
1505 }
1506
msm_poll_put_char(struct uart_port * port,unsigned char c)1507 static void msm_poll_put_char(struct uart_port *port, unsigned char c)
1508 {
1509 u32 imr;
1510 struct msm_port *msm_port = to_msm_port(port);
1511
1512 /* Disable all interrupts */
1513 imr = msm_read(port, MSM_UART_IMR);
1514 msm_write(port, 0, MSM_UART_IMR);
1515
1516 if (msm_port->is_uartdm)
1517 msm_reset_dm_count(port, 1);
1518
1519 /* Wait until FIFO is empty */
1520 while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
1521 cpu_relax();
1522
1523 /* Write a character */
1524 msm_write(port, c, msm_port->is_uartdm ? UARTDM_TF : MSM_UART_TF);
1525
1526 /* Wait until FIFO is empty */
1527 while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
1528 cpu_relax();
1529
1530 /* Enable interrupts */
1531 msm_write(port, imr, MSM_UART_IMR);
1532 }
1533 #endif
1534
1535 static const struct uart_ops msm_uart_pops = {
1536 .tx_empty = msm_tx_empty,
1537 .set_mctrl = msm_set_mctrl,
1538 .get_mctrl = msm_get_mctrl,
1539 .stop_tx = msm_stop_tx,
1540 .start_tx = msm_start_tx,
1541 .stop_rx = msm_stop_rx,
1542 .enable_ms = msm_enable_ms,
1543 .break_ctl = msm_break_ctl,
1544 .startup = msm_startup,
1545 .shutdown = msm_shutdown,
1546 .set_termios = msm_set_termios,
1547 .type = msm_type,
1548 .release_port = msm_release_port,
1549 .request_port = msm_request_port,
1550 .config_port = msm_config_port,
1551 .verify_port = msm_verify_port,
1552 .pm = msm_power,
1553 #ifdef CONFIG_CONSOLE_POLL
1554 .poll_get_char = msm_poll_get_char,
1555 .poll_put_char = msm_poll_put_char,
1556 #endif
1557 };
1558
1559 static struct msm_port msm_uart_ports[] = {
1560 {
1561 .uart = {
1562 .iotype = UPIO_MEM,
1563 .ops = &msm_uart_pops,
1564 .flags = UPF_BOOT_AUTOCONF,
1565 .fifosize = 64,
1566 .line = 0,
1567 },
1568 },
1569 {
1570 .uart = {
1571 .iotype = UPIO_MEM,
1572 .ops = &msm_uart_pops,
1573 .flags = UPF_BOOT_AUTOCONF,
1574 .fifosize = 64,
1575 .line = 1,
1576 },
1577 },
1578 {
1579 .uart = {
1580 .iotype = UPIO_MEM,
1581 .ops = &msm_uart_pops,
1582 .flags = UPF_BOOT_AUTOCONF,
1583 .fifosize = 64,
1584 .line = 2,
1585 },
1586 },
1587 };
1588
1589 #define MSM_UART_NR ARRAY_SIZE(msm_uart_ports)
1590
msm_get_port_from_line(unsigned int line)1591 static inline struct uart_port *msm_get_port_from_line(unsigned int line)
1592 {
1593 return &msm_uart_ports[line].uart;
1594 }
1595
1596 #ifdef CONFIG_SERIAL_MSM_CONSOLE
__msm_console_write(struct uart_port * port,const char * s,unsigned int count,bool is_uartdm)1597 static void __msm_console_write(struct uart_port *port, const char *s,
1598 unsigned int count, bool is_uartdm)
1599 {
1600 unsigned long flags;
1601 int i;
1602 int num_newlines = 0;
1603 bool replaced = false;
1604 void __iomem *tf;
1605 int locked = 1;
1606
1607 if (is_uartdm)
1608 tf = port->membase + UARTDM_TF;
1609 else
1610 tf = port->membase + MSM_UART_TF;
1611
1612 /* Account for newlines that will get a carriage return added */
1613 for (i = 0; i < count; i++)
1614 if (s[i] == '\n')
1615 num_newlines++;
1616 count += num_newlines;
1617
1618 local_irq_save(flags);
1619
1620 if (port->sysrq)
1621 locked = 0;
1622 else if (oops_in_progress)
1623 locked = spin_trylock(&port->lock);
1624 else
1625 spin_lock(&port->lock);
1626
1627 if (is_uartdm)
1628 msm_reset_dm_count(port, count);
1629
1630 i = 0;
1631 while (i < count) {
1632 int j;
1633 unsigned int num_chars;
1634 char buf[4] = { 0 };
1635
1636 if (is_uartdm)
1637 num_chars = min(count - i, (unsigned int)sizeof(buf));
1638 else
1639 num_chars = 1;
1640
1641 for (j = 0; j < num_chars; j++) {
1642 char c = *s;
1643
1644 if (c == '\n' && !replaced) {
1645 buf[j] = '\r';
1646 j++;
1647 replaced = true;
1648 }
1649 if (j < num_chars) {
1650 buf[j] = c;
1651 s++;
1652 replaced = false;
1653 }
1654 }
1655
1656 while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
1657 cpu_relax();
1658
1659 iowrite32_rep(tf, buf, 1);
1660 i += num_chars;
1661 }
1662
1663 if (locked)
1664 spin_unlock(&port->lock);
1665
1666 local_irq_restore(flags);
1667 }
1668
msm_console_write(struct console * co,const char * s,unsigned int count)1669 static void msm_console_write(struct console *co, const char *s,
1670 unsigned int count)
1671 {
1672 struct uart_port *port;
1673 struct msm_port *msm_port;
1674
1675 BUG_ON(co->index < 0 || co->index >= MSM_UART_NR);
1676
1677 port = msm_get_port_from_line(co->index);
1678 msm_port = to_msm_port(port);
1679
1680 __msm_console_write(port, s, count, msm_port->is_uartdm);
1681 }
1682
msm_console_setup(struct console * co,char * options)1683 static int msm_console_setup(struct console *co, char *options)
1684 {
1685 struct uart_port *port;
1686 int baud = 115200;
1687 int bits = 8;
1688 int parity = 'n';
1689 int flow = 'n';
1690
1691 if (unlikely(co->index >= MSM_UART_NR || co->index < 0))
1692 return -ENXIO;
1693
1694 port = msm_get_port_from_line(co->index);
1695
1696 if (unlikely(!port->membase))
1697 return -ENXIO;
1698
1699 msm_init_clock(port);
1700
1701 if (options)
1702 uart_parse_options(options, &baud, &parity, &bits, &flow);
1703
1704 pr_info("msm_serial: console setup on port #%d\n", port->line);
1705
1706 return uart_set_options(port, co, baud, parity, bits, flow);
1707 }
1708
1709 static void
msm_serial_early_write(struct console * con,const char * s,unsigned n)1710 msm_serial_early_write(struct console *con, const char *s, unsigned n)
1711 {
1712 struct earlycon_device *dev = con->data;
1713
1714 __msm_console_write(&dev->port, s, n, false);
1715 }
1716
1717 static int __init
msm_serial_early_console_setup(struct earlycon_device * device,const char * opt)1718 msm_serial_early_console_setup(struct earlycon_device *device, const char *opt)
1719 {
1720 if (!device->port.membase)
1721 return -ENODEV;
1722
1723 device->con->write = msm_serial_early_write;
1724 return 0;
1725 }
1726 OF_EARLYCON_DECLARE(msm_serial, "qcom,msm-uart",
1727 msm_serial_early_console_setup);
1728
1729 static void
msm_serial_early_write_dm(struct console * con,const char * s,unsigned n)1730 msm_serial_early_write_dm(struct console *con, const char *s, unsigned n)
1731 {
1732 struct earlycon_device *dev = con->data;
1733
1734 __msm_console_write(&dev->port, s, n, true);
1735 }
1736
1737 static int __init
msm_serial_early_console_setup_dm(struct earlycon_device * device,const char * opt)1738 msm_serial_early_console_setup_dm(struct earlycon_device *device,
1739 const char *opt)
1740 {
1741 if (!device->port.membase)
1742 return -ENODEV;
1743
1744 device->con->write = msm_serial_early_write_dm;
1745 return 0;
1746 }
1747 OF_EARLYCON_DECLARE(msm_serial_dm, "qcom,msm-uartdm",
1748 msm_serial_early_console_setup_dm);
1749
1750 static struct uart_driver msm_uart_driver;
1751
1752 static struct console msm_console = {
1753 .name = "ttyMSM",
1754 .write = msm_console_write,
1755 .device = uart_console_device,
1756 .setup = msm_console_setup,
1757 .flags = CON_PRINTBUFFER,
1758 .index = -1,
1759 .data = &msm_uart_driver,
1760 };
1761
1762 #define MSM_CONSOLE (&msm_console)
1763
1764 #else
1765 #define MSM_CONSOLE NULL
1766 #endif
1767
1768 static struct uart_driver msm_uart_driver = {
1769 .owner = THIS_MODULE,
1770 .driver_name = "msm_serial",
1771 .dev_name = "ttyMSM",
1772 .nr = MSM_UART_NR,
1773 .cons = MSM_CONSOLE,
1774 };
1775
1776 static atomic_t msm_uart_next_id = ATOMIC_INIT(0);
1777
1778 static const struct of_device_id msm_uartdm_table[] = {
1779 { .compatible = "qcom,msm-uartdm-v1.1", .data = (void *)UARTDM_1P1 },
1780 { .compatible = "qcom,msm-uartdm-v1.2", .data = (void *)UARTDM_1P2 },
1781 { .compatible = "qcom,msm-uartdm-v1.3", .data = (void *)UARTDM_1P3 },
1782 { .compatible = "qcom,msm-uartdm-v1.4", .data = (void *)UARTDM_1P4 },
1783 { }
1784 };
1785
msm_serial_probe(struct platform_device * pdev)1786 static int msm_serial_probe(struct platform_device *pdev)
1787 {
1788 struct msm_port *msm_port;
1789 struct resource *resource;
1790 struct uart_port *port;
1791 const struct of_device_id *id;
1792 int irq, line;
1793
1794 if (pdev->dev.of_node)
1795 line = of_alias_get_id(pdev->dev.of_node, "serial");
1796 else
1797 line = pdev->id;
1798
1799 if (line < 0)
1800 line = atomic_inc_return(&msm_uart_next_id) - 1;
1801
1802 if (unlikely(line < 0 || line >= MSM_UART_NR))
1803 return -ENXIO;
1804
1805 dev_info(&pdev->dev, "msm_serial: detected port #%d\n", line);
1806
1807 port = msm_get_port_from_line(line);
1808 port->dev = &pdev->dev;
1809 msm_port = to_msm_port(port);
1810
1811 id = of_match_device(msm_uartdm_table, &pdev->dev);
1812 if (id)
1813 msm_port->is_uartdm = (unsigned long)id->data;
1814 else
1815 msm_port->is_uartdm = 0;
1816
1817 msm_port->clk = devm_clk_get(&pdev->dev, "core");
1818 if (IS_ERR(msm_port->clk))
1819 return PTR_ERR(msm_port->clk);
1820
1821 if (msm_port->is_uartdm) {
1822 msm_port->pclk = devm_clk_get(&pdev->dev, "iface");
1823 if (IS_ERR(msm_port->pclk))
1824 return PTR_ERR(msm_port->pclk);
1825 }
1826
1827 port->uartclk = clk_get_rate(msm_port->clk);
1828 dev_info(&pdev->dev, "uartclk = %d\n", port->uartclk);
1829
1830 resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1831 if (unlikely(!resource))
1832 return -ENXIO;
1833 port->mapbase = resource->start;
1834
1835 irq = platform_get_irq(pdev, 0);
1836 if (unlikely(irq < 0))
1837 return -ENXIO;
1838 port->irq = irq;
1839 port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MSM_CONSOLE);
1840
1841 platform_set_drvdata(pdev, port);
1842
1843 return uart_add_one_port(&msm_uart_driver, port);
1844 }
1845
msm_serial_remove(struct platform_device * pdev)1846 static int msm_serial_remove(struct platform_device *pdev)
1847 {
1848 struct uart_port *port = platform_get_drvdata(pdev);
1849
1850 uart_remove_one_port(&msm_uart_driver, port);
1851
1852 return 0;
1853 }
1854
1855 static const struct of_device_id msm_match_table[] = {
1856 { .compatible = "qcom,msm-uart" },
1857 { .compatible = "qcom,msm-uartdm" },
1858 {}
1859 };
1860 MODULE_DEVICE_TABLE(of, msm_match_table);
1861
msm_serial_suspend(struct device * dev)1862 static int __maybe_unused msm_serial_suspend(struct device *dev)
1863 {
1864 struct msm_port *port = dev_get_drvdata(dev);
1865
1866 uart_suspend_port(&msm_uart_driver, &port->uart);
1867
1868 return 0;
1869 }
1870
msm_serial_resume(struct device * dev)1871 static int __maybe_unused msm_serial_resume(struct device *dev)
1872 {
1873 struct msm_port *port = dev_get_drvdata(dev);
1874
1875 uart_resume_port(&msm_uart_driver, &port->uart);
1876
1877 return 0;
1878 }
1879
1880 static const struct dev_pm_ops msm_serial_dev_pm_ops = {
1881 SET_SYSTEM_SLEEP_PM_OPS(msm_serial_suspend, msm_serial_resume)
1882 };
1883
1884 static struct platform_driver msm_platform_driver = {
1885 .remove = msm_serial_remove,
1886 .probe = msm_serial_probe,
1887 .driver = {
1888 .name = "msm_serial",
1889 .pm = &msm_serial_dev_pm_ops,
1890 .of_match_table = msm_match_table,
1891 },
1892 };
1893
msm_serial_init(void)1894 static int __init msm_serial_init(void)
1895 {
1896 int ret;
1897
1898 ret = uart_register_driver(&msm_uart_driver);
1899 if (unlikely(ret))
1900 return ret;
1901
1902 ret = platform_driver_register(&msm_platform_driver);
1903 if (unlikely(ret))
1904 uart_unregister_driver(&msm_uart_driver);
1905
1906 pr_info("msm_serial: driver initialized\n");
1907
1908 return ret;
1909 }
1910
msm_serial_exit(void)1911 static void __exit msm_serial_exit(void)
1912 {
1913 platform_driver_unregister(&msm_platform_driver);
1914 uart_unregister_driver(&msm_uart_driver);
1915 }
1916
1917 module_init(msm_serial_init);
1918 module_exit(msm_serial_exit);
1919
1920 MODULE_AUTHOR("Robert Love <rlove@google.com>");
1921 MODULE_DESCRIPTION("Driver for msm7x serial device");
1922 MODULE_LICENSE("GPL");
1923