1 /* 2 * MEN 16z135 High Speed UART 3 * 4 * Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de) 5 * Author: Johannes Thumshirn <johannes.thumshirn@men.de> 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the Free 9 * Software Foundation; version 2 of the License. 10 */ 11 #define pr_fmt(fmt) KBUILD_MODNAME ":" fmt 12 13 #include <linux/kernel.h> 14 #include <linux/module.h> 15 #include <linux/interrupt.h> 16 #include <linux/serial_core.h> 17 #include <linux/ioport.h> 18 #include <linux/io.h> 19 #include <linux/tty_flip.h> 20 #include <linux/bitops.h> 21 #include <linux/mcb.h> 22 23 #define MEN_Z135_MAX_PORTS 12 24 #define MEN_Z135_BASECLK 29491200 25 #define MEN_Z135_FIFO_SIZE 1024 26 #define MEN_Z135_FIFO_WATERMARK 1020 27 28 #define MEN_Z135_STAT_REG 0x0 29 #define MEN_Z135_RX_RAM 0x4 30 #define MEN_Z135_TX_RAM 0x400 31 #define MEN_Z135_RX_CTRL 0x800 32 #define MEN_Z135_TX_CTRL 0x804 33 #define MEN_Z135_CONF_REG 0x808 34 #define MEN_Z135_UART_FREQ 0x80c 35 #define MEN_Z135_BAUD_REG 0x810 36 #define MEN_Z135_TIMEOUT 0x814 37 38 #define MEN_Z135_MEM_SIZE 0x818 39 40 #define IRQ_ID(x) ((x) & 0x1f) 41 42 #define MEN_Z135_IER_RXCIEN BIT(0) /* RX Space IRQ */ 43 #define MEN_Z135_IER_TXCIEN BIT(1) /* TX Space IRQ */ 44 #define MEN_Z135_IER_RLSIEN BIT(2) /* Receiver Line Status IRQ */ 45 #define MEN_Z135_IER_MSIEN BIT(3) /* Modem Status IRQ */ 46 #define MEN_Z135_ALL_IRQS (MEN_Z135_IER_RXCIEN \ 47 | MEN_Z135_IER_RLSIEN \ 48 | MEN_Z135_IER_MSIEN \ 49 | MEN_Z135_IER_TXCIEN) 50 51 #define MEN_Z135_MCR_DTR BIT(24) 52 #define MEN_Z135_MCR_RTS BIT(25) 53 #define MEN_Z135_MCR_OUT1 BIT(26) 54 #define MEN_Z135_MCR_OUT2 BIT(27) 55 #define MEN_Z135_MCR_LOOP BIT(28) 56 #define MEN_Z135_MCR_RCFC BIT(29) 57 58 #define MEN_Z135_MSR_DCTS BIT(0) 59 #define MEN_Z135_MSR_DDSR BIT(1) 60 #define MEN_Z135_MSR_DRI BIT(2) 61 #define MEN_Z135_MSR_DDCD BIT(3) 62 #define MEN_Z135_MSR_CTS BIT(4) 63 #define MEN_Z135_MSR_DSR BIT(5) 64 #define MEN_Z135_MSR_RI BIT(6) 65 #define MEN_Z135_MSR_DCD BIT(7) 66 67 #define MEN_Z135_LCR_SHIFT 8 /* LCR shift mask */ 68 69 #define MEN_Z135_WL5 0 /* CS5 */ 70 #define MEN_Z135_WL6 1 /* CS6 */ 71 #define MEN_Z135_WL7 2 /* CS7 */ 72 #define MEN_Z135_WL8 3 /* CS8 */ 73 74 #define MEN_Z135_STB_SHIFT 2 /* Stopbits */ 75 #define MEN_Z135_NSTB1 0 76 #define MEN_Z135_NSTB2 1 77 78 #define MEN_Z135_PEN_SHIFT 3 /* Parity enable */ 79 #define MEN_Z135_PAR_DIS 0 80 #define MEN_Z135_PAR_ENA 1 81 82 #define MEN_Z135_PTY_SHIFT 4 /* Parity type */ 83 #define MEN_Z135_PTY_ODD 0 84 #define MEN_Z135_PTY_EVN 1 85 86 #define MEN_Z135_LSR_DR BIT(0) 87 #define MEN_Z135_LSR_OE BIT(1) 88 #define MEN_Z135_LSR_PE BIT(2) 89 #define MEN_Z135_LSR_FE BIT(3) 90 #define MEN_Z135_LSR_BI BIT(4) 91 #define MEN_Z135_LSR_THEP BIT(5) 92 #define MEN_Z135_LSR_TEXP BIT(6) 93 #define MEN_Z135_LSR_RXFIFOERR BIT(7) 94 95 #define MEN_Z135_IRQ_ID_RLS BIT(0) 96 #define MEN_Z135_IRQ_ID_RDA BIT(1) 97 #define MEN_Z135_IRQ_ID_CTI BIT(2) 98 #define MEN_Z135_IRQ_ID_TSA BIT(3) 99 #define MEN_Z135_IRQ_ID_MST BIT(4) 100 101 #define LCR(x) (((x) >> MEN_Z135_LCR_SHIFT) & 0xff) 102 103 #define BYTES_TO_ALIGN(x) ((x) & 0x3) 104 105 static int line; 106 107 static int txlvl = 5; 108 module_param(txlvl, int, S_IRUGO); 109 MODULE_PARM_DESC(txlvl, "TX IRQ trigger level 0-7, default 5 (128 byte)"); 110 111 static int rxlvl = 6; 112 module_param(rxlvl, int, S_IRUGO); 113 MODULE_PARM_DESC(rxlvl, "RX IRQ trigger level 0-7, default 6 (256 byte)"); 114 115 static int align; 116 module_param(align, int, S_IRUGO); 117 MODULE_PARM_DESC(align, "Keep hardware FIFO write pointer aligned, default 0"); 118 119 static uint rx_timeout; 120 module_param(rx_timeout, uint, S_IRUGO); 121 MODULE_PARM_DESC(rx_timeout, "RX timeout. " 122 "Timeout in seconds = (timeout_reg * baud_reg * 4) / freq_reg"); 123 124 struct men_z135_port { 125 struct uart_port port; 126 struct mcb_device *mdev; 127 unsigned char *rxbuf; 128 u32 stat_reg; 129 spinlock_t lock; 130 bool automode; 131 }; 132 #define to_men_z135(port) container_of((port), struct men_z135_port, port) 133 134 /** 135 * men_z135_reg_set() - Set value in register 136 * @uart: The UART port 137 * @addr: Register address 138 * @val: value to set 139 */ 140 static inline void men_z135_reg_set(struct men_z135_port *uart, 141 u32 addr, u32 val) 142 { 143 struct uart_port *port = &uart->port; 144 unsigned long flags; 145 u32 reg; 146 147 spin_lock_irqsave(&uart->lock, flags); 148 149 reg = ioread32(port->membase + addr); 150 reg |= val; 151 iowrite32(reg, port->membase + addr); 152 153 spin_unlock_irqrestore(&uart->lock, flags); 154 } 155 156 /** 157 * men_z135_reg_clr() - Unset value in register 158 * @uart: The UART port 159 * @addr: Register address 160 * @val: value to clear 161 */ 162 static inline void men_z135_reg_clr(struct men_z135_port *uart, 163 u32 addr, u32 val) 164 { 165 struct uart_port *port = &uart->port; 166 unsigned long flags; 167 u32 reg; 168 169 spin_lock_irqsave(&uart->lock, flags); 170 171 reg = ioread32(port->membase + addr); 172 reg &= ~val; 173 iowrite32(reg, port->membase + addr); 174 175 spin_unlock_irqrestore(&uart->lock, flags); 176 } 177 178 /** 179 * men_z135_handle_modem_status() - Handle change of modem status 180 * @port: The UART port 181 * 182 * Handle change of modem status register. This is done by reading the "delta" 183 * versions of DCD (Data Carrier Detect) and CTS (Clear To Send). 184 */ 185 static void men_z135_handle_modem_status(struct men_z135_port *uart) 186 { 187 u8 msr; 188 189 msr = (uart->stat_reg >> 8) & 0xff; 190 191 if (msr & MEN_Z135_MSR_DDCD) 192 uart_handle_dcd_change(&uart->port, 193 msr & MEN_Z135_MSR_DCD); 194 if (msr & MEN_Z135_MSR_DCTS) 195 uart_handle_cts_change(&uart->port, 196 msr & MEN_Z135_MSR_CTS); 197 } 198 199 static void men_z135_handle_lsr(struct men_z135_port *uart) 200 { 201 struct uart_port *port = &uart->port; 202 u8 lsr; 203 204 lsr = (uart->stat_reg >> 16) & 0xff; 205 206 if (lsr & MEN_Z135_LSR_OE) 207 port->icount.overrun++; 208 if (lsr & MEN_Z135_LSR_PE) 209 port->icount.parity++; 210 if (lsr & MEN_Z135_LSR_FE) 211 port->icount.frame++; 212 if (lsr & MEN_Z135_LSR_BI) { 213 port->icount.brk++; 214 uart_handle_break(port); 215 } 216 } 217 218 /** 219 * get_rx_fifo_content() - Get the number of bytes in RX FIFO 220 * @uart: The UART port 221 * 222 * Read RXC register from hardware and return current FIFO fill size. 223 */ 224 static u16 get_rx_fifo_content(struct men_z135_port *uart) 225 { 226 struct uart_port *port = &uart->port; 227 u32 stat_reg; 228 u16 rxc; 229 u8 rxc_lo; 230 u8 rxc_hi; 231 232 stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG); 233 rxc_lo = stat_reg >> 24; 234 rxc_hi = (stat_reg & 0xC0) >> 6; 235 236 rxc = rxc_lo | (rxc_hi << 8); 237 238 return rxc; 239 } 240 241 /** 242 * men_z135_handle_rx() - RX tasklet routine 243 * @arg: Pointer to struct men_z135_port 244 * 245 * Copy from RX FIFO and acknowledge number of bytes copied. 246 */ 247 static void men_z135_handle_rx(struct men_z135_port *uart) 248 { 249 struct uart_port *port = &uart->port; 250 struct tty_port *tport = &port->state->port; 251 int copied; 252 u16 size; 253 int room; 254 255 size = get_rx_fifo_content(uart); 256 257 if (size == 0) 258 return; 259 260 /* Avoid accidently accessing TX FIFO instead of RX FIFO. Last 261 * longword in RX FIFO cannot be read.(0x004-0x3FF) 262 */ 263 if (size > MEN_Z135_FIFO_WATERMARK) 264 size = MEN_Z135_FIFO_WATERMARK; 265 266 room = tty_buffer_request_room(tport, size); 267 if (room != size) 268 dev_warn(&uart->mdev->dev, 269 "Not enough room in flip buffer, truncating to %d\n", 270 room); 271 272 if (room == 0) 273 return; 274 275 memcpy_fromio(uart->rxbuf, port->membase + MEN_Z135_RX_RAM, room); 276 /* Be sure to first copy all data and then acknowledge it */ 277 mb(); 278 iowrite32(room, port->membase + MEN_Z135_RX_CTRL); 279 280 copied = tty_insert_flip_string(tport, uart->rxbuf, room); 281 if (copied != room) 282 dev_warn(&uart->mdev->dev, 283 "Only copied %d instead of %d bytes\n", 284 copied, room); 285 286 port->icount.rx += copied; 287 288 tty_flip_buffer_push(tport); 289 290 } 291 292 /** 293 * men_z135_handle_tx() - TX tasklet routine 294 * @arg: Pointer to struct men_z135_port 295 * 296 */ 297 static void men_z135_handle_tx(struct men_z135_port *uart) 298 { 299 struct uart_port *port = &uart->port; 300 struct circ_buf *xmit = &port->state->xmit; 301 u32 txc; 302 u32 wptr; 303 int qlen; 304 int n; 305 int txfree; 306 int head; 307 int tail; 308 int s; 309 310 if (uart_circ_empty(xmit)) 311 goto out; 312 313 if (uart_tx_stopped(port)) 314 goto out; 315 316 if (port->x_char) 317 goto out; 318 319 /* calculate bytes to copy */ 320 qlen = uart_circ_chars_pending(xmit); 321 if (qlen <= 0) 322 goto out; 323 324 wptr = ioread32(port->membase + MEN_Z135_TX_CTRL); 325 txc = (wptr >> 16) & 0x3ff; 326 wptr &= 0x3ff; 327 328 if (txc > MEN_Z135_FIFO_WATERMARK) 329 txc = MEN_Z135_FIFO_WATERMARK; 330 331 txfree = MEN_Z135_FIFO_WATERMARK - txc; 332 if (txfree <= 0) { 333 dev_err(&uart->mdev->dev, 334 "Not enough room in TX FIFO have %d, need %d\n", 335 txfree, qlen); 336 goto irq_en; 337 } 338 339 /* if we're not aligned, it's better to copy only 1 or 2 bytes and 340 * then the rest. 341 */ 342 if (align && qlen >= 3 && BYTES_TO_ALIGN(wptr)) 343 n = 4 - BYTES_TO_ALIGN(wptr); 344 else if (qlen > txfree) 345 n = txfree; 346 else 347 n = qlen; 348 349 if (n <= 0) 350 goto irq_en; 351 352 head = xmit->head & (UART_XMIT_SIZE - 1); 353 tail = xmit->tail & (UART_XMIT_SIZE - 1); 354 355 s = ((head >= tail) ? head : UART_XMIT_SIZE) - tail; 356 n = min(n, s); 357 358 memcpy_toio(port->membase + MEN_Z135_TX_RAM, &xmit->buf[xmit->tail], n); 359 xmit->tail = (xmit->tail + n) & (UART_XMIT_SIZE - 1); 360 mmiowb(); 361 362 iowrite32(n & 0x3ff, port->membase + MEN_Z135_TX_CTRL); 363 364 port->icount.tx += n; 365 366 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 367 uart_write_wakeup(port); 368 369 irq_en: 370 if (!uart_circ_empty(xmit)) 371 men_z135_reg_set(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN); 372 else 373 men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN); 374 375 out: 376 return; 377 378 } 379 380 /** 381 * men_z135_intr() - Handle legacy IRQs 382 * @irq: The IRQ number 383 * @data: Pointer to UART port 384 * 385 * Check IIR register to find the cause of the interrupt and handle it. 386 * It is possible that multiple interrupts reason bits are set and reading 387 * the IIR is a destructive read, so we always need to check for all possible 388 * interrupts and handle them. 389 */ 390 static irqreturn_t men_z135_intr(int irq, void *data) 391 { 392 struct men_z135_port *uart = (struct men_z135_port *)data; 393 struct uart_port *port = &uart->port; 394 bool handled = false; 395 int irq_id; 396 397 uart->stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG); 398 irq_id = IRQ_ID(uart->stat_reg); 399 400 if (!irq_id) 401 goto out; 402 403 spin_lock(&port->lock); 404 /* It's save to write to IIR[7:6] RXC[9:8] */ 405 iowrite8(irq_id, port->membase + MEN_Z135_STAT_REG); 406 407 if (irq_id & MEN_Z135_IRQ_ID_RLS) { 408 men_z135_handle_lsr(uart); 409 handled = true; 410 } 411 412 if (irq_id & (MEN_Z135_IRQ_ID_RDA | MEN_Z135_IRQ_ID_CTI)) { 413 if (irq_id & MEN_Z135_IRQ_ID_CTI) 414 dev_dbg(&uart->mdev->dev, "Character Timeout Indication\n"); 415 men_z135_handle_rx(uart); 416 handled = true; 417 } 418 419 if (irq_id & MEN_Z135_IRQ_ID_TSA) { 420 men_z135_handle_tx(uart); 421 handled = true; 422 } 423 424 if (irq_id & MEN_Z135_IRQ_ID_MST) { 425 men_z135_handle_modem_status(uart); 426 handled = true; 427 } 428 429 spin_unlock(&port->lock); 430 out: 431 return IRQ_RETVAL(handled); 432 } 433 434 /** 435 * men_z135_request_irq() - Request IRQ for 16z135 core 436 * @uart: z135 private uart port structure 437 * 438 * Request an IRQ for 16z135 to use. First try using MSI, if it fails 439 * fall back to using legacy interrupts. 440 */ 441 static int men_z135_request_irq(struct men_z135_port *uart) 442 { 443 struct device *dev = &uart->mdev->dev; 444 struct uart_port *port = &uart->port; 445 int err = 0; 446 447 err = request_irq(port->irq, men_z135_intr, IRQF_SHARED, 448 "men_z135_intr", uart); 449 if (err) 450 dev_err(dev, "Error %d getting interrupt\n", err); 451 452 return err; 453 } 454 455 /** 456 * men_z135_tx_empty() - Handle tx_empty call 457 * @port: The UART port 458 * 459 * This function tests whether the TX FIFO and shifter for the port 460 * described by @port is empty. 461 */ 462 static unsigned int men_z135_tx_empty(struct uart_port *port) 463 { 464 u32 wptr; 465 u16 txc; 466 467 wptr = ioread32(port->membase + MEN_Z135_TX_CTRL); 468 txc = (wptr >> 16) & 0x3ff; 469 470 if (txc == 0) 471 return TIOCSER_TEMT; 472 else 473 return 0; 474 } 475 476 /** 477 * men_z135_set_mctrl() - Set modem control lines 478 * @port: The UART port 479 * @mctrl: The modem control lines 480 * 481 * This function sets the modem control lines for a port described by @port 482 * to the state described by @mctrl 483 */ 484 static void men_z135_set_mctrl(struct uart_port *port, unsigned int mctrl) 485 { 486 u32 old; 487 u32 conf_reg; 488 489 conf_reg = old = ioread32(port->membase + MEN_Z135_CONF_REG); 490 if (mctrl & TIOCM_RTS) 491 conf_reg |= MEN_Z135_MCR_RTS; 492 else 493 conf_reg &= ~MEN_Z135_MCR_RTS; 494 495 if (mctrl & TIOCM_DTR) 496 conf_reg |= MEN_Z135_MCR_DTR; 497 else 498 conf_reg &= ~MEN_Z135_MCR_DTR; 499 500 if (mctrl & TIOCM_OUT1) 501 conf_reg |= MEN_Z135_MCR_OUT1; 502 else 503 conf_reg &= ~MEN_Z135_MCR_OUT1; 504 505 if (mctrl & TIOCM_OUT2) 506 conf_reg |= MEN_Z135_MCR_OUT2; 507 else 508 conf_reg &= ~MEN_Z135_MCR_OUT2; 509 510 if (mctrl & TIOCM_LOOP) 511 conf_reg |= MEN_Z135_MCR_LOOP; 512 else 513 conf_reg &= ~MEN_Z135_MCR_LOOP; 514 515 if (conf_reg != old) 516 iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG); 517 } 518 519 /** 520 * men_z135_get_mctrl() - Get modem control lines 521 * @port: The UART port 522 * 523 * Retruns the current state of modem control inputs. 524 */ 525 static unsigned int men_z135_get_mctrl(struct uart_port *port) 526 { 527 unsigned int mctrl = 0; 528 u8 msr; 529 530 msr = ioread8(port->membase + MEN_Z135_STAT_REG + 1); 531 532 if (msr & MEN_Z135_MSR_CTS) 533 mctrl |= TIOCM_CTS; 534 if (msr & MEN_Z135_MSR_DSR) 535 mctrl |= TIOCM_DSR; 536 if (msr & MEN_Z135_MSR_RI) 537 mctrl |= TIOCM_RI; 538 if (msr & MEN_Z135_MSR_DCD) 539 mctrl |= TIOCM_CAR; 540 541 return mctrl; 542 } 543 544 /** 545 * men_z135_stop_tx() - Stop transmitting characters 546 * @port: The UART port 547 * 548 * Stop transmitting characters. This might be due to CTS line becomming 549 * inactive or the tty layer indicating we want to stop transmission due to 550 * an XOFF character. 551 */ 552 static void men_z135_stop_tx(struct uart_port *port) 553 { 554 struct men_z135_port *uart = to_men_z135(port); 555 556 men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN); 557 } 558 559 /* 560 * men_z135_disable_ms() - Disable Modem Status 561 * port: The UART port 562 * 563 * Enable Modem Status IRQ. 564 */ 565 static void men_z135_disable_ms(struct uart_port *port) 566 { 567 struct men_z135_port *uart = to_men_z135(port); 568 569 men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_MSIEN); 570 } 571 572 /** 573 * men_z135_start_tx() - Start transmitting characters 574 * @port: The UART port 575 * 576 * Start transmitting character. This actually doesn't transmit anything, but 577 * fires off the TX tasklet. 578 */ 579 static void men_z135_start_tx(struct uart_port *port) 580 { 581 struct men_z135_port *uart = to_men_z135(port); 582 583 if (uart->automode) 584 men_z135_disable_ms(port); 585 586 men_z135_handle_tx(uart); 587 } 588 589 /** 590 * men_z135_stop_rx() - Stop receiving characters 591 * @port: The UART port 592 * 593 * Stop receiving characters; the port is in the process of being closed. 594 */ 595 static void men_z135_stop_rx(struct uart_port *port) 596 { 597 struct men_z135_port *uart = to_men_z135(port); 598 599 men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_RXCIEN); 600 } 601 602 /** 603 * men_z135_enable_ms() - Enable Modem Status 604 * port: 605 * 606 * Enable Modem Status IRQ. 607 */ 608 static void men_z135_enable_ms(struct uart_port *port) 609 { 610 struct men_z135_port *uart = to_men_z135(port); 611 612 men_z135_reg_set(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_MSIEN); 613 } 614 615 static int men_z135_startup(struct uart_port *port) 616 { 617 struct men_z135_port *uart = to_men_z135(port); 618 int err; 619 u32 conf_reg = 0; 620 621 err = men_z135_request_irq(uart); 622 if (err) 623 return -ENODEV; 624 625 conf_reg = ioread32(port->membase + MEN_Z135_CONF_REG); 626 627 /* Activate all but TX space available IRQ */ 628 conf_reg |= MEN_Z135_ALL_IRQS & ~MEN_Z135_IER_TXCIEN; 629 conf_reg &= ~(0xff << 16); 630 conf_reg |= (txlvl << 16); 631 conf_reg |= (rxlvl << 20); 632 633 iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG); 634 635 if (rx_timeout) 636 iowrite32(rx_timeout, port->membase + MEN_Z135_TIMEOUT); 637 638 return 0; 639 } 640 641 static void men_z135_shutdown(struct uart_port *port) 642 { 643 struct men_z135_port *uart = to_men_z135(port); 644 u32 conf_reg = 0; 645 646 conf_reg |= MEN_Z135_ALL_IRQS; 647 648 men_z135_reg_clr(uart, MEN_Z135_CONF_REG, conf_reg); 649 650 free_irq(uart->port.irq, uart); 651 } 652 653 static void men_z135_set_termios(struct uart_port *port, 654 struct ktermios *termios, 655 struct ktermios *old) 656 { 657 struct men_z135_port *uart = to_men_z135(port); 658 unsigned int baud; 659 u32 conf_reg; 660 u32 bd_reg; 661 u32 uart_freq; 662 u8 lcr; 663 664 conf_reg = ioread32(port->membase + MEN_Z135_CONF_REG); 665 lcr = LCR(conf_reg); 666 667 /* byte size */ 668 switch (termios->c_cflag & CSIZE) { 669 case CS5: 670 lcr |= MEN_Z135_WL5; 671 break; 672 case CS6: 673 lcr |= MEN_Z135_WL6; 674 break; 675 case CS7: 676 lcr |= MEN_Z135_WL7; 677 break; 678 case CS8: 679 lcr |= MEN_Z135_WL8; 680 break; 681 } 682 683 /* stop bits */ 684 if (termios->c_cflag & CSTOPB) 685 lcr |= MEN_Z135_NSTB2 << MEN_Z135_STB_SHIFT; 686 687 /* parity */ 688 if (termios->c_cflag & PARENB) { 689 lcr |= MEN_Z135_PAR_ENA << MEN_Z135_PEN_SHIFT; 690 691 if (termios->c_cflag & PARODD) 692 lcr |= MEN_Z135_PTY_ODD << MEN_Z135_PTY_SHIFT; 693 else 694 lcr |= MEN_Z135_PTY_EVN << MEN_Z135_PTY_SHIFT; 695 } else 696 lcr |= MEN_Z135_PAR_DIS << MEN_Z135_PEN_SHIFT; 697 698 conf_reg |= MEN_Z135_IER_MSIEN; 699 if (termios->c_cflag & CRTSCTS) { 700 conf_reg |= MEN_Z135_MCR_RCFC; 701 uart->automode = true; 702 termios->c_cflag &= ~CLOCAL; 703 } else { 704 conf_reg &= ~MEN_Z135_MCR_RCFC; 705 uart->automode = false; 706 } 707 708 termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */ 709 710 conf_reg |= lcr << MEN_Z135_LCR_SHIFT; 711 iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG); 712 713 uart_freq = ioread32(port->membase + MEN_Z135_UART_FREQ); 714 if (uart_freq == 0) 715 uart_freq = MEN_Z135_BASECLK; 716 717 baud = uart_get_baud_rate(port, termios, old, 0, uart_freq / 16); 718 719 spin_lock_irq(&port->lock); 720 if (tty_termios_baud_rate(termios)) 721 tty_termios_encode_baud_rate(termios, baud, baud); 722 723 bd_reg = uart_freq / (4 * baud); 724 iowrite32(bd_reg, port->membase + MEN_Z135_BAUD_REG); 725 726 uart_update_timeout(port, termios->c_cflag, baud); 727 spin_unlock_irq(&port->lock); 728 } 729 730 static const char *men_z135_type(struct uart_port *port) 731 { 732 return KBUILD_MODNAME; 733 } 734 735 static void men_z135_release_port(struct uart_port *port) 736 { 737 iounmap(port->membase); 738 port->membase = NULL; 739 740 release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE); 741 } 742 743 static int men_z135_request_port(struct uart_port *port) 744 { 745 int size = MEN_Z135_MEM_SIZE; 746 747 if (!request_mem_region(port->mapbase, size, "men_z135_port")) 748 return -EBUSY; 749 750 port->membase = ioremap(port->mapbase, MEN_Z135_MEM_SIZE); 751 if (port->membase == NULL) { 752 release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE); 753 return -ENOMEM; 754 } 755 756 return 0; 757 } 758 759 static void men_z135_config_port(struct uart_port *port, int type) 760 { 761 port->type = PORT_MEN_Z135; 762 men_z135_request_port(port); 763 } 764 765 static int men_z135_verify_port(struct uart_port *port, 766 struct serial_struct *serinfo) 767 { 768 return -EINVAL; 769 } 770 771 static struct uart_ops men_z135_ops = { 772 .tx_empty = men_z135_tx_empty, 773 .set_mctrl = men_z135_set_mctrl, 774 .get_mctrl = men_z135_get_mctrl, 775 .stop_tx = men_z135_stop_tx, 776 .start_tx = men_z135_start_tx, 777 .stop_rx = men_z135_stop_rx, 778 .enable_ms = men_z135_enable_ms, 779 .startup = men_z135_startup, 780 .shutdown = men_z135_shutdown, 781 .set_termios = men_z135_set_termios, 782 .type = men_z135_type, 783 .release_port = men_z135_release_port, 784 .request_port = men_z135_request_port, 785 .config_port = men_z135_config_port, 786 .verify_port = men_z135_verify_port, 787 }; 788 789 static struct uart_driver men_z135_driver = { 790 .owner = THIS_MODULE, 791 .driver_name = KBUILD_MODNAME, 792 .dev_name = "ttyHSU", 793 .major = 0, 794 .minor = 0, 795 .nr = MEN_Z135_MAX_PORTS, 796 }; 797 798 /** 799 * men_z135_probe() - Probe a z135 instance 800 * @mdev: The MCB device 801 * @id: The MCB device ID 802 * 803 * men_z135_probe does the basic setup of hardware resources and registers the 804 * new uart port to the tty layer. 805 */ 806 static int men_z135_probe(struct mcb_device *mdev, 807 const struct mcb_device_id *id) 808 { 809 struct men_z135_port *uart; 810 struct resource *mem; 811 struct device *dev; 812 int err; 813 814 dev = &mdev->dev; 815 816 uart = devm_kzalloc(dev, sizeof(struct men_z135_port), GFP_KERNEL); 817 if (!uart) 818 return -ENOMEM; 819 820 uart->rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL); 821 if (!uart->rxbuf) 822 return -ENOMEM; 823 824 mem = &mdev->mem; 825 826 mcb_set_drvdata(mdev, uart); 827 828 uart->port.uartclk = MEN_Z135_BASECLK * 16; 829 uart->port.fifosize = MEN_Z135_FIFO_SIZE; 830 uart->port.iotype = UPIO_MEM; 831 uart->port.ops = &men_z135_ops; 832 uart->port.irq = mcb_get_irq(mdev); 833 uart->port.iotype = UPIO_MEM; 834 uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; 835 uart->port.line = line++; 836 uart->port.dev = dev; 837 uart->port.type = PORT_MEN_Z135; 838 uart->port.mapbase = mem->start; 839 uart->port.membase = NULL; 840 uart->mdev = mdev; 841 842 spin_lock_init(&uart->port.lock); 843 spin_lock_init(&uart->lock); 844 845 err = uart_add_one_port(&men_z135_driver, &uart->port); 846 if (err) 847 goto err; 848 849 return 0; 850 851 err: 852 free_page((unsigned long) uart->rxbuf); 853 dev_err(dev, "Failed to add UART: %d\n", err); 854 855 return err; 856 } 857 858 /** 859 * men_z135_remove() - Remove a z135 instance from the system 860 * 861 * @mdev: The MCB device 862 */ 863 static void men_z135_remove(struct mcb_device *mdev) 864 { 865 struct men_z135_port *uart = mcb_get_drvdata(mdev); 866 867 line--; 868 uart_remove_one_port(&men_z135_driver, &uart->port); 869 free_page((unsigned long) uart->rxbuf); 870 } 871 872 static const struct mcb_device_id men_z135_ids[] = { 873 { .device = 0x87 }, 874 { } 875 }; 876 MODULE_DEVICE_TABLE(mcb, men_z135_ids); 877 878 static struct mcb_driver mcb_driver = { 879 .driver = { 880 .name = "z135-uart", 881 .owner = THIS_MODULE, 882 }, 883 .probe = men_z135_probe, 884 .remove = men_z135_remove, 885 .id_table = men_z135_ids, 886 }; 887 888 /** 889 * men_z135_init() - Driver Registration Routine 890 * 891 * men_z135_init is the first routine called when the driver is loaded. All it 892 * does is register with the legacy MEN Chameleon subsystem. 893 */ 894 static int __init men_z135_init(void) 895 { 896 int err; 897 898 err = uart_register_driver(&men_z135_driver); 899 if (err) { 900 pr_err("Failed to register UART: %d\n", err); 901 return err; 902 } 903 904 err = mcb_register_driver(&mcb_driver); 905 if (err) { 906 pr_err("Failed to register MCB driver: %d\n", err); 907 uart_unregister_driver(&men_z135_driver); 908 return err; 909 } 910 911 return 0; 912 } 913 module_init(men_z135_init); 914 915 /** 916 * men_z135_exit() - Driver Exit Routine 917 * 918 * men_z135_exit is called just before the driver is removed from memory. 919 */ 920 static void __exit men_z135_exit(void) 921 { 922 mcb_unregister_driver(&mcb_driver); 923 uart_unregister_driver(&men_z135_driver); 924 } 925 module_exit(men_z135_exit); 926 927 MODULE_AUTHOR("Johannes Thumshirn <johannes.thumshirn@men.de>"); 928 MODULE_LICENSE("GPL v2"); 929 MODULE_DESCRIPTION("MEN 16z135 High Speed UART"); 930 MODULE_ALIAS("mcb:16z135"); 931