1 // SPDX-License-Identifier: GPL-2.0+ 2 /****************************************************************************/ 3 4 /* 5 * mcf.c -- Freescale ColdFire UART driver 6 * 7 * (C) Copyright 2003-2007, Greg Ungerer <gerg@uclinux.org> 8 */ 9 10 /****************************************************************************/ 11 12 #include <linux/kernel.h> 13 #include <linux/init.h> 14 #include <linux/interrupt.h> 15 #include <linux/module.h> 16 #include <linux/console.h> 17 #include <linux/tty.h> 18 #include <linux/tty_flip.h> 19 #include <linux/serial.h> 20 #include <linux/serial_core.h> 21 #include <linux/io.h> 22 #include <linux/uaccess.h> 23 #include <linux/platform_device.h> 24 #include <asm/coldfire.h> 25 #include <asm/mcfsim.h> 26 #include <asm/mcfuart.h> 27 #include <asm/nettel.h> 28 29 /****************************************************************************/ 30 31 /* 32 * Some boards implement the DTR/DCD lines using GPIO lines, most 33 * don't. Dummy out the access macros for those that don't. Those 34 * that do should define these macros somewhere in there board 35 * specific inlude files. 36 */ 37 #if !defined(mcf_getppdcd) 38 #define mcf_getppdcd(p) (1) 39 #endif 40 #if !defined(mcf_getppdtr) 41 #define mcf_getppdtr(p) (1) 42 #endif 43 #if !defined(mcf_setppdtr) 44 #define mcf_setppdtr(p, v) do { } while (0) 45 #endif 46 47 /****************************************************************************/ 48 49 /* 50 * Local per-uart structure. 51 */ 52 struct mcf_uart { 53 struct uart_port port; 54 unsigned int sigs; /* Local copy of line sigs */ 55 unsigned char imr; /* Local IMR mirror */ 56 }; 57 58 /****************************************************************************/ 59 60 static unsigned int mcf_tx_empty(struct uart_port *port) 61 { 62 return (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXEMPTY) ? 63 TIOCSER_TEMT : 0; 64 } 65 66 /****************************************************************************/ 67 68 static unsigned int mcf_get_mctrl(struct uart_port *port) 69 { 70 struct mcf_uart *pp = container_of(port, struct mcf_uart, port); 71 unsigned int sigs; 72 73 sigs = (readb(port->membase + MCFUART_UIPR) & MCFUART_UIPR_CTS) ? 74 0 : TIOCM_CTS; 75 sigs |= (pp->sigs & TIOCM_RTS); 76 sigs |= (mcf_getppdcd(port->line) ? TIOCM_CD : 0); 77 sigs |= (mcf_getppdtr(port->line) ? TIOCM_DTR : 0); 78 79 return sigs; 80 } 81 82 /****************************************************************************/ 83 84 static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs) 85 { 86 struct mcf_uart *pp = container_of(port, struct mcf_uart, port); 87 88 pp->sigs = sigs; 89 mcf_setppdtr(port->line, (sigs & TIOCM_DTR)); 90 if (sigs & TIOCM_RTS) 91 writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1); 92 else 93 writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP0); 94 } 95 96 /****************************************************************************/ 97 98 static void mcf_start_tx(struct uart_port *port) 99 { 100 struct mcf_uart *pp = container_of(port, struct mcf_uart, port); 101 102 if (port->rs485.flags & SER_RS485_ENABLED) { 103 /* Enable Transmitter */ 104 writeb(MCFUART_UCR_TXENABLE, port->membase + MCFUART_UCR); 105 /* Manually assert RTS */ 106 writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1); 107 } 108 pp->imr |= MCFUART_UIR_TXREADY; 109 writeb(pp->imr, port->membase + MCFUART_UIMR); 110 } 111 112 /****************************************************************************/ 113 114 static void mcf_stop_tx(struct uart_port *port) 115 { 116 struct mcf_uart *pp = container_of(port, struct mcf_uart, port); 117 118 pp->imr &= ~MCFUART_UIR_TXREADY; 119 writeb(pp->imr, port->membase + MCFUART_UIMR); 120 } 121 122 /****************************************************************************/ 123 124 static void mcf_stop_rx(struct uart_port *port) 125 { 126 struct mcf_uart *pp = container_of(port, struct mcf_uart, port); 127 128 pp->imr &= ~MCFUART_UIR_RXREADY; 129 writeb(pp->imr, port->membase + MCFUART_UIMR); 130 } 131 132 /****************************************************************************/ 133 134 static void mcf_break_ctl(struct uart_port *port, int break_state) 135 { 136 unsigned long flags; 137 138 spin_lock_irqsave(&port->lock, flags); 139 if (break_state == -1) 140 writeb(MCFUART_UCR_CMDBREAKSTART, port->membase + MCFUART_UCR); 141 else 142 writeb(MCFUART_UCR_CMDBREAKSTOP, port->membase + MCFUART_UCR); 143 spin_unlock_irqrestore(&port->lock, flags); 144 } 145 146 /****************************************************************************/ 147 148 static int mcf_startup(struct uart_port *port) 149 { 150 struct mcf_uart *pp = container_of(port, struct mcf_uart, port); 151 unsigned long flags; 152 153 spin_lock_irqsave(&port->lock, flags); 154 155 /* Reset UART, get it into known state... */ 156 writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); 157 writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); 158 159 /* Enable the UART transmitter and receiver */ 160 writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, 161 port->membase + MCFUART_UCR); 162 163 /* Enable RX interrupts now */ 164 pp->imr = MCFUART_UIR_RXREADY; 165 writeb(pp->imr, port->membase + MCFUART_UIMR); 166 167 spin_unlock_irqrestore(&port->lock, flags); 168 169 return 0; 170 } 171 172 /****************************************************************************/ 173 174 static void mcf_shutdown(struct uart_port *port) 175 { 176 struct mcf_uart *pp = container_of(port, struct mcf_uart, port); 177 unsigned long flags; 178 179 spin_lock_irqsave(&port->lock, flags); 180 181 /* Disable all interrupts now */ 182 pp->imr = 0; 183 writeb(pp->imr, port->membase + MCFUART_UIMR); 184 185 /* Disable UART transmitter and receiver */ 186 writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); 187 writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); 188 189 spin_unlock_irqrestore(&port->lock, flags); 190 } 191 192 /****************************************************************************/ 193 194 static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, 195 const struct ktermios *old) 196 { 197 unsigned long flags; 198 unsigned int baud, baudclk; 199 #if defined(CONFIG_M5272) 200 unsigned int baudfr; 201 #endif 202 unsigned char mr1, mr2; 203 204 baud = uart_get_baud_rate(port, termios, old, 0, 230400); 205 #if defined(CONFIG_M5272) 206 baudclk = (MCF_BUSCLK / baud) / 32; 207 baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16; 208 #else 209 baudclk = ((MCF_BUSCLK / baud) + 16) / 32; 210 #endif 211 212 mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR; 213 mr2 = 0; 214 215 switch (termios->c_cflag & CSIZE) { 216 case CS5: mr1 |= MCFUART_MR1_CS5; break; 217 case CS6: mr1 |= MCFUART_MR1_CS6; break; 218 case CS7: mr1 |= MCFUART_MR1_CS7; break; 219 case CS8: 220 default: mr1 |= MCFUART_MR1_CS8; break; 221 } 222 223 if (termios->c_cflag & PARENB) { 224 if (termios->c_cflag & CMSPAR) { 225 if (termios->c_cflag & PARODD) 226 mr1 |= MCFUART_MR1_PARITYMARK; 227 else 228 mr1 |= MCFUART_MR1_PARITYSPACE; 229 } else { 230 if (termios->c_cflag & PARODD) 231 mr1 |= MCFUART_MR1_PARITYODD; 232 else 233 mr1 |= MCFUART_MR1_PARITYEVEN; 234 } 235 } else { 236 mr1 |= MCFUART_MR1_PARITYNONE; 237 } 238 239 /* 240 * FIXME: port->read_status_mask and port->ignore_status_mask 241 * need to be initialized based on termios settings for 242 * INPCK, IGNBRK, IGNPAR, PARMRK, BRKINT 243 */ 244 245 if (termios->c_cflag & CSTOPB) 246 mr2 |= MCFUART_MR2_STOP2; 247 else 248 mr2 |= MCFUART_MR2_STOP1; 249 250 if (termios->c_cflag & CRTSCTS) { 251 mr1 |= MCFUART_MR1_RXRTS; 252 mr2 |= MCFUART_MR2_TXCTS; 253 } 254 255 spin_lock_irqsave(&port->lock, flags); 256 if (port->rs485.flags & SER_RS485_ENABLED) { 257 dev_dbg(port->dev, "Setting UART to RS485\n"); 258 mr2 |= MCFUART_MR2_TXRTS; 259 } 260 261 uart_update_timeout(port, termios->c_cflag, baud); 262 writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); 263 writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); 264 writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR); 265 writeb(mr1, port->membase + MCFUART_UMR); 266 writeb(mr2, port->membase + MCFUART_UMR); 267 writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1); 268 writeb((baudclk & 0xff), port->membase + MCFUART_UBG2); 269 #if defined(CONFIG_M5272) 270 writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD); 271 #endif 272 writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER, 273 port->membase + MCFUART_UCSR); 274 writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, 275 port->membase + MCFUART_UCR); 276 spin_unlock_irqrestore(&port->lock, flags); 277 } 278 279 /****************************************************************************/ 280 281 static void mcf_rx_chars(struct mcf_uart *pp) 282 { 283 struct uart_port *port = &pp->port; 284 u8 status, ch, flag; 285 286 while ((status = readb(port->membase + MCFUART_USR)) & MCFUART_USR_RXREADY) { 287 ch = readb(port->membase + MCFUART_URB); 288 flag = TTY_NORMAL; 289 port->icount.rx++; 290 291 if (status & MCFUART_USR_RXERR) { 292 writeb(MCFUART_UCR_CMDRESETERR, 293 port->membase + MCFUART_UCR); 294 295 if (status & MCFUART_USR_RXBREAK) { 296 port->icount.brk++; 297 if (uart_handle_break(port)) 298 continue; 299 } else if (status & MCFUART_USR_RXPARITY) { 300 port->icount.parity++; 301 } else if (status & MCFUART_USR_RXOVERRUN) { 302 port->icount.overrun++; 303 } else if (status & MCFUART_USR_RXFRAMING) { 304 port->icount.frame++; 305 } 306 307 status &= port->read_status_mask; 308 309 if (status & MCFUART_USR_RXBREAK) 310 flag = TTY_BREAK; 311 else if (status & MCFUART_USR_RXPARITY) 312 flag = TTY_PARITY; 313 else if (status & MCFUART_USR_RXFRAMING) 314 flag = TTY_FRAME; 315 } 316 317 if (uart_handle_sysrq_char(port, ch)) 318 continue; 319 uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag); 320 } 321 322 tty_flip_buffer_push(&port->state->port); 323 } 324 325 /****************************************************************************/ 326 327 static void mcf_tx_chars(struct mcf_uart *pp) 328 { 329 struct uart_port *port = &pp->port; 330 bool pending; 331 u8 ch; 332 333 pending = uart_port_tx(port, ch, 334 readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY, 335 writeb(ch, port->membase + MCFUART_UTB)); 336 337 /* Disable TX to negate RTS automatically */ 338 if (!pending && (port->rs485.flags & SER_RS485_ENABLED)) 339 writeb(MCFUART_UCR_TXDISABLE, port->membase + MCFUART_UCR); 340 } 341 342 /****************************************************************************/ 343 344 static irqreturn_t mcf_interrupt(int irq, void *data) 345 { 346 struct uart_port *port = data; 347 struct mcf_uart *pp = container_of(port, struct mcf_uart, port); 348 unsigned int isr; 349 irqreturn_t ret = IRQ_NONE; 350 351 isr = readb(port->membase + MCFUART_UISR) & pp->imr; 352 353 spin_lock(&port->lock); 354 if (isr & MCFUART_UIR_RXREADY) { 355 mcf_rx_chars(pp); 356 ret = IRQ_HANDLED; 357 } 358 if (isr & MCFUART_UIR_TXREADY) { 359 mcf_tx_chars(pp); 360 ret = IRQ_HANDLED; 361 } 362 spin_unlock(&port->lock); 363 364 return ret; 365 } 366 367 /****************************************************************************/ 368 369 static void mcf_config_port(struct uart_port *port, int flags) 370 { 371 port->type = PORT_MCF; 372 port->fifosize = MCFUART_TXFIFOSIZE; 373 374 /* Clear mask, so no surprise interrupts. */ 375 writeb(0, port->membase + MCFUART_UIMR); 376 377 if (request_irq(port->irq, mcf_interrupt, 0, "UART", port)) 378 printk(KERN_ERR "MCF: unable to attach ColdFire UART %d " 379 "interrupt vector=%d\n", port->line, port->irq); 380 } 381 382 /****************************************************************************/ 383 384 static const char *mcf_type(struct uart_port *port) 385 { 386 return (port->type == PORT_MCF) ? "ColdFire UART" : NULL; 387 } 388 389 /****************************************************************************/ 390 391 static int mcf_request_port(struct uart_port *port) 392 { 393 /* UARTs always present */ 394 return 0; 395 } 396 397 /****************************************************************************/ 398 399 static void mcf_release_port(struct uart_port *port) 400 { 401 /* Nothing to release... */ 402 } 403 404 /****************************************************************************/ 405 406 static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser) 407 { 408 if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_MCF)) 409 return -EINVAL; 410 return 0; 411 } 412 413 /****************************************************************************/ 414 415 /* Enable or disable the RS485 support */ 416 static int mcf_config_rs485(struct uart_port *port, struct ktermios *termios, 417 struct serial_rs485 *rs485) 418 { 419 unsigned char mr1, mr2; 420 421 /* Get mode registers */ 422 mr1 = readb(port->membase + MCFUART_UMR); 423 mr2 = readb(port->membase + MCFUART_UMR); 424 if (rs485->flags & SER_RS485_ENABLED) { 425 dev_dbg(port->dev, "Setting UART to RS485\n"); 426 /* Automatically negate RTS after TX completes */ 427 mr2 |= MCFUART_MR2_TXRTS; 428 } else { 429 dev_dbg(port->dev, "Setting UART to RS232\n"); 430 mr2 &= ~MCFUART_MR2_TXRTS; 431 } 432 writeb(mr1, port->membase + MCFUART_UMR); 433 writeb(mr2, port->membase + MCFUART_UMR); 434 435 return 0; 436 } 437 438 static const struct serial_rs485 mcf_rs485_supported = { 439 .flags = SER_RS485_ENABLED | SER_RS485_RTS_AFTER_SEND, 440 }; 441 442 /****************************************************************************/ 443 444 /* 445 * Define the basic serial functions we support. 446 */ 447 static const struct uart_ops mcf_uart_ops = { 448 .tx_empty = mcf_tx_empty, 449 .get_mctrl = mcf_get_mctrl, 450 .set_mctrl = mcf_set_mctrl, 451 .start_tx = mcf_start_tx, 452 .stop_tx = mcf_stop_tx, 453 .stop_rx = mcf_stop_rx, 454 .break_ctl = mcf_break_ctl, 455 .startup = mcf_startup, 456 .shutdown = mcf_shutdown, 457 .set_termios = mcf_set_termios, 458 .type = mcf_type, 459 .request_port = mcf_request_port, 460 .release_port = mcf_release_port, 461 .config_port = mcf_config_port, 462 .verify_port = mcf_verify_port, 463 }; 464 465 static struct mcf_uart mcf_ports[4]; 466 467 #define MCF_MAXPORTS ARRAY_SIZE(mcf_ports) 468 469 /****************************************************************************/ 470 #if defined(CONFIG_SERIAL_MCF_CONSOLE) 471 /****************************************************************************/ 472 473 int __init early_mcf_setup(struct mcf_platform_uart *platp) 474 { 475 struct uart_port *port; 476 int i; 477 478 for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) { 479 port = &mcf_ports[i].port; 480 481 port->line = i; 482 port->type = PORT_MCF; 483 port->mapbase = platp[i].mapbase; 484 port->membase = (platp[i].membase) ? platp[i].membase : 485 (unsigned char __iomem *) port->mapbase; 486 port->iotype = SERIAL_IO_MEM; 487 port->irq = platp[i].irq; 488 port->uartclk = MCF_BUSCLK; 489 port->flags = UPF_BOOT_AUTOCONF; 490 port->rs485_config = mcf_config_rs485; 491 port->rs485_supported = mcf_rs485_supported; 492 port->ops = &mcf_uart_ops; 493 } 494 495 return 0; 496 } 497 498 /****************************************************************************/ 499 500 static void mcf_console_putc(struct console *co, const char c) 501 { 502 struct uart_port *port = &(mcf_ports + co->index)->port; 503 int i; 504 505 for (i = 0; (i < 0x10000); i++) { 506 if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) 507 break; 508 } 509 writeb(c, port->membase + MCFUART_UTB); 510 for (i = 0; (i < 0x10000); i++) { 511 if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) 512 break; 513 } 514 } 515 516 /****************************************************************************/ 517 518 static void mcf_console_write(struct console *co, const char *s, unsigned int count) 519 { 520 for (; (count); count--, s++) { 521 mcf_console_putc(co, *s); 522 if (*s == '\n') 523 mcf_console_putc(co, '\r'); 524 } 525 } 526 527 /****************************************************************************/ 528 529 static int __init mcf_console_setup(struct console *co, char *options) 530 { 531 struct uart_port *port; 532 int baud = CONFIG_SERIAL_MCF_BAUDRATE; 533 int bits = 8; 534 int parity = 'n'; 535 int flow = 'n'; 536 537 if ((co->index < 0) || (co->index >= MCF_MAXPORTS)) 538 co->index = 0; 539 port = &mcf_ports[co->index].port; 540 if (port->membase == 0) 541 return -ENODEV; 542 543 if (options) 544 uart_parse_options(options, &baud, &parity, &bits, &flow); 545 546 return uart_set_options(port, co, baud, parity, bits, flow); 547 } 548 549 /****************************************************************************/ 550 551 static struct uart_driver mcf_driver; 552 553 static struct console mcf_console = { 554 .name = "ttyS", 555 .write = mcf_console_write, 556 .device = uart_console_device, 557 .setup = mcf_console_setup, 558 .flags = CON_PRINTBUFFER, 559 .index = -1, 560 .data = &mcf_driver, 561 }; 562 563 static int __init mcf_console_init(void) 564 { 565 register_console(&mcf_console); 566 return 0; 567 } 568 569 console_initcall(mcf_console_init); 570 571 #define MCF_CONSOLE &mcf_console 572 573 /****************************************************************************/ 574 #else 575 /****************************************************************************/ 576 577 #define MCF_CONSOLE NULL 578 579 /****************************************************************************/ 580 #endif /* CONFIG_SERIAL_MCF_CONSOLE */ 581 /****************************************************************************/ 582 583 /* 584 * Define the mcf UART driver structure. 585 */ 586 static struct uart_driver mcf_driver = { 587 .owner = THIS_MODULE, 588 .driver_name = "mcf", 589 .dev_name = "ttyS", 590 .major = TTY_MAJOR, 591 .minor = 64, 592 .nr = MCF_MAXPORTS, 593 .cons = MCF_CONSOLE, 594 }; 595 596 /****************************************************************************/ 597 598 static int mcf_probe(struct platform_device *pdev) 599 { 600 struct mcf_platform_uart *platp = dev_get_platdata(&pdev->dev); 601 struct uart_port *port; 602 int i; 603 604 for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) { 605 port = &mcf_ports[i].port; 606 607 port->line = i; 608 port->type = PORT_MCF; 609 port->mapbase = platp[i].mapbase; 610 port->membase = (platp[i].membase) ? platp[i].membase : 611 (unsigned char __iomem *) platp[i].mapbase; 612 port->dev = &pdev->dev; 613 port->iotype = SERIAL_IO_MEM; 614 port->irq = platp[i].irq; 615 port->uartclk = MCF_BUSCLK; 616 port->ops = &mcf_uart_ops; 617 port->flags = UPF_BOOT_AUTOCONF; 618 port->rs485_config = mcf_config_rs485; 619 port->rs485_supported = mcf_rs485_supported; 620 port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MCF_CONSOLE); 621 622 uart_add_one_port(&mcf_driver, port); 623 } 624 625 return 0; 626 } 627 628 /****************************************************************************/ 629 630 static int mcf_remove(struct platform_device *pdev) 631 { 632 struct uart_port *port; 633 int i; 634 635 for (i = 0; (i < MCF_MAXPORTS); i++) { 636 port = &mcf_ports[i].port; 637 if (port) 638 uart_remove_one_port(&mcf_driver, port); 639 } 640 641 return 0; 642 } 643 644 /****************************************************************************/ 645 646 static struct platform_driver mcf_platform_driver = { 647 .probe = mcf_probe, 648 .remove = mcf_remove, 649 .driver = { 650 .name = "mcfuart", 651 }, 652 }; 653 654 /****************************************************************************/ 655 656 static int __init mcf_init(void) 657 { 658 int rc; 659 660 printk("ColdFire internal UART serial driver\n"); 661 662 rc = uart_register_driver(&mcf_driver); 663 if (rc) 664 return rc; 665 rc = platform_driver_register(&mcf_platform_driver); 666 if (rc) { 667 uart_unregister_driver(&mcf_driver); 668 return rc; 669 } 670 return 0; 671 } 672 673 /****************************************************************************/ 674 675 static void __exit mcf_exit(void) 676 { 677 platform_driver_unregister(&mcf_platform_driver); 678 uart_unregister_driver(&mcf_driver); 679 } 680 681 /****************************************************************************/ 682 683 module_init(mcf_init); 684 module_exit(mcf_exit); 685 686 MODULE_AUTHOR("Greg Ungerer <gerg@uclinux.org>"); 687 MODULE_DESCRIPTION("Freescale ColdFire UART driver"); 688 MODULE_LICENSE("GPL"); 689 MODULE_ALIAS("platform:mcfuart"); 690 691 /****************************************************************************/ 692