xref: /openbmc/linux/drivers/tty/serial/mcf.c (revision 6abeae2a) 
1 // SPDX-License-Identifier: GPL-2.0+
2 /****************************************************************************/
3 
4 /*
5  *	mcf.c -- Freescale ColdFire UART driver
6  *
7  *	(C) Copyright 2003-2007, Greg Ungerer <gerg@uclinux.org>
8  */
9 
10 /****************************************************************************/
11 
12 #include <linux/kernel.h>
13 #include <linux/init.h>
14 #include <linux/interrupt.h>
15 #include <linux/module.h>
16 #include <linux/console.h>
17 #include <linux/tty.h>
18 #include <linux/tty_flip.h>
19 #include <linux/serial.h>
20 #include <linux/serial_core.h>
21 #include <linux/io.h>
22 #include <linux/uaccess.h>
23 #include <linux/platform_device.h>
24 #include <asm/coldfire.h>
25 #include <asm/mcfsim.h>
26 #include <asm/mcfuart.h>
27 #include <asm/nettel.h>
28 
29 /****************************************************************************/
30 
31 /*
32  *	Some boards implement the DTR/DCD lines using GPIO lines, most
33  *	don't. Dummy out the access macros for those that don't. Those
34  *	that do should define these macros somewhere in there board
35  *	specific inlude files.
36  */
37 #if !defined(mcf_getppdcd)
38 #define	mcf_getppdcd(p)		(1)
39 #endif
40 #if !defined(mcf_getppdtr)
41 #define	mcf_getppdtr(p)		(1)
42 #endif
43 #if !defined(mcf_setppdtr)
44 #define	mcf_setppdtr(p, v)	do { } while (0)
45 #endif
46 
47 /****************************************************************************/
48 
49 /*
50  *	Local per-uart structure.
51  */
52 struct mcf_uart {
53 	struct uart_port	port;
54 	unsigned int		sigs;		/* Local copy of line sigs */
55 	unsigned char		imr;		/* Local IMR mirror */
56 };
57 
58 /****************************************************************************/
59 
60 static unsigned int mcf_tx_empty(struct uart_port *port)
61 {
62 	return (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXEMPTY) ?
63 		TIOCSER_TEMT : 0;
64 }
65 
66 /****************************************************************************/
67 
68 static unsigned int mcf_get_mctrl(struct uart_port *port)
69 {
70 	struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
71 	unsigned int sigs;
72 
73 	sigs = (readb(port->membase + MCFUART_UIPR) & MCFUART_UIPR_CTS) ?
74 		0 : TIOCM_CTS;
75 	sigs |= (pp->sigs & TIOCM_RTS);
76 	sigs |= (mcf_getppdcd(port->line) ? TIOCM_CD : 0);
77 	sigs |= (mcf_getppdtr(port->line) ? TIOCM_DTR : 0);
78 
79 	return sigs;
80 }
81 
82 /****************************************************************************/
83 
84 static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs)
85 {
86 	struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
87 
88 	pp->sigs = sigs;
89 	mcf_setppdtr(port->line, (sigs & TIOCM_DTR));
90 	if (sigs & TIOCM_RTS)
91 		writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1);
92 	else
93 		writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP0);
94 }
95 
96 /****************************************************************************/
97 
98 static void mcf_start_tx(struct uart_port *port)
99 {
100 	struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
101 
102 	if (port->rs485.flags & SER_RS485_ENABLED) {
103 		/* Enable Transmitter */
104 		writeb(MCFUART_UCR_TXENABLE, port->membase + MCFUART_UCR);
105 		/* Manually assert RTS */
106 		writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1);
107 	}
108 	pp->imr |= MCFUART_UIR_TXREADY;
109 	writeb(pp->imr, port->membase + MCFUART_UIMR);
110 }
111 
112 /****************************************************************************/
113 
114 static void mcf_stop_tx(struct uart_port *port)
115 {
116 	struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
117 
118 	pp->imr &= ~MCFUART_UIR_TXREADY;
119 	writeb(pp->imr, port->membase + MCFUART_UIMR);
120 }
121 
122 /****************************************************************************/
123 
124 static void mcf_stop_rx(struct uart_port *port)
125 {
126 	struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
127 
128 	pp->imr &= ~MCFUART_UIR_RXREADY;
129 	writeb(pp->imr, port->membase + MCFUART_UIMR);
130 }
131 
132 /****************************************************************************/
133 
134 static void mcf_break_ctl(struct uart_port *port, int break_state)
135 {
136 	unsigned long flags;
137 
138 	spin_lock_irqsave(&port->lock, flags);
139 	if (break_state == -1)
140 		writeb(MCFUART_UCR_CMDBREAKSTART, port->membase + MCFUART_UCR);
141 	else
142 		writeb(MCFUART_UCR_CMDBREAKSTOP, port->membase + MCFUART_UCR);
143 	spin_unlock_irqrestore(&port->lock, flags);
144 }
145 
146 /****************************************************************************/
147 
148 static int mcf_startup(struct uart_port *port)
149 {
150 	struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
151 	unsigned long flags;
152 
153 	spin_lock_irqsave(&port->lock, flags);
154 
155 	/* Reset UART, get it into known state... */
156 	writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
157 	writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
158 
159 	/* Enable the UART transmitter and receiver */
160 	writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE,
161 		port->membase + MCFUART_UCR);
162 
163 	/* Enable RX interrupts now */
164 	pp->imr = MCFUART_UIR_RXREADY;
165 	writeb(pp->imr, port->membase + MCFUART_UIMR);
166 
167 	spin_unlock_irqrestore(&port->lock, flags);
168 
169 	return 0;
170 }
171 
172 /****************************************************************************/
173 
174 static void mcf_shutdown(struct uart_port *port)
175 {
176 	struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
177 	unsigned long flags;
178 
179 	spin_lock_irqsave(&port->lock, flags);
180 
181 	/* Disable all interrupts now */
182 	pp->imr = 0;
183 	writeb(pp->imr, port->membase + MCFUART_UIMR);
184 
185 	/* Disable UART transmitter and receiver */
186 	writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
187 	writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
188 
189 	spin_unlock_irqrestore(&port->lock, flags);
190 }
191 
192 /****************************************************************************/
193 
194 static void mcf_set_termios(struct uart_port *port, struct ktermios *termios,
195 	struct ktermios *old)
196 {
197 	unsigned long flags;
198 	unsigned int baud, baudclk;
199 #if defined(CONFIG_M5272)
200 	unsigned int baudfr;
201 #endif
202 	unsigned char mr1, mr2;
203 
204 	baud = uart_get_baud_rate(port, termios, old, 0, 230400);
205 #if defined(CONFIG_M5272)
206 	baudclk = (MCF_BUSCLK / baud) / 32;
207 	baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16;
208 #else
209 	baudclk = ((MCF_BUSCLK / baud) + 16) / 32;
210 #endif
211 
212 	mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR;
213 	mr2 = 0;
214 
215 	switch (termios->c_cflag & CSIZE) {
216 	case CS5: mr1 |= MCFUART_MR1_CS5; break;
217 	case CS6: mr1 |= MCFUART_MR1_CS6; break;
218 	case CS7: mr1 |= MCFUART_MR1_CS7; break;
219 	case CS8:
220 	default:  mr1 |= MCFUART_MR1_CS8; break;
221 	}
222 
223 	if (termios->c_cflag & PARENB) {
224 		if (termios->c_cflag & CMSPAR) {
225 			if (termios->c_cflag & PARODD)
226 				mr1 |= MCFUART_MR1_PARITYMARK;
227 			else
228 				mr1 |= MCFUART_MR1_PARITYSPACE;
229 		} else {
230 			if (termios->c_cflag & PARODD)
231 				mr1 |= MCFUART_MR1_PARITYODD;
232 			else
233 				mr1 |= MCFUART_MR1_PARITYEVEN;
234 		}
235 	} else {
236 		mr1 |= MCFUART_MR1_PARITYNONE;
237 	}
238 
239 	/*
240 	 * FIXME: port->read_status_mask and port->ignore_status_mask
241 	 * need to be initialized based on termios settings for
242 	 * INPCK, IGNBRK, IGNPAR, PARMRK, BRKINT
243 	 */
244 
245 	if (termios->c_cflag & CSTOPB)
246 		mr2 |= MCFUART_MR2_STOP2;
247 	else
248 		mr2 |= MCFUART_MR2_STOP1;
249 
250 	if (termios->c_cflag & CRTSCTS) {
251 		mr1 |= MCFUART_MR1_RXRTS;
252 		mr2 |= MCFUART_MR2_TXCTS;
253 	}
254 
255 	spin_lock_irqsave(&port->lock, flags);
256 	if (port->rs485.flags & SER_RS485_ENABLED) {
257 		dev_dbg(port->dev, "Setting UART to RS485\n");
258 		mr2 |= MCFUART_MR2_TXRTS;
259 	}
260 
261 	uart_update_timeout(port, termios->c_cflag, baud);
262 	writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
263 	writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
264 	writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR);
265 	writeb(mr1, port->membase + MCFUART_UMR);
266 	writeb(mr2, port->membase + MCFUART_UMR);
267 	writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1);
268 	writeb((baudclk & 0xff), port->membase + MCFUART_UBG2);
269 #if defined(CONFIG_M5272)
270 	writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD);
271 #endif
272 	writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER,
273 		port->membase + MCFUART_UCSR);
274 	writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE,
275 		port->membase + MCFUART_UCR);
276 	spin_unlock_irqrestore(&port->lock, flags);
277 }
278 
279 /****************************************************************************/
280 
281 static void mcf_rx_chars(struct mcf_uart *pp)
282 {
283 	struct uart_port *port = &pp->port;
284 	unsigned char status, ch, flag;
285 
286 	while ((status = readb(port->membase + MCFUART_USR)) & MCFUART_USR_RXREADY) {
287 		ch = readb(port->membase + MCFUART_URB);
288 		flag = TTY_NORMAL;
289 		port->icount.rx++;
290 
291 		if (status & MCFUART_USR_RXERR) {
292 			writeb(MCFUART_UCR_CMDRESETERR,
293 				port->membase + MCFUART_UCR);
294 
295 			if (status & MCFUART_USR_RXBREAK) {
296 				port->icount.brk++;
297 				if (uart_handle_break(port))
298 					continue;
299 			} else if (status & MCFUART_USR_RXPARITY) {
300 				port->icount.parity++;
301 			} else if (status & MCFUART_USR_RXOVERRUN) {
302 				port->icount.overrun++;
303 			} else if (status & MCFUART_USR_RXFRAMING) {
304 				port->icount.frame++;
305 			}
306 
307 			status &= port->read_status_mask;
308 
309 			if (status & MCFUART_USR_RXBREAK)
310 				flag = TTY_BREAK;
311 			else if (status & MCFUART_USR_RXPARITY)
312 				flag = TTY_PARITY;
313 			else if (status & MCFUART_USR_RXFRAMING)
314 				flag = TTY_FRAME;
315 		}
316 
317 		if (uart_handle_sysrq_char(port, ch))
318 			continue;
319 		uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag);
320 	}
321 
322 	spin_unlock(&port->lock);
323 	tty_flip_buffer_push(&port->state->port);
324 	spin_lock(&port->lock);
325 }
326 
327 /****************************************************************************/
328 
329 static void mcf_tx_chars(struct mcf_uart *pp)
330 {
331 	struct uart_port *port = &pp->port;
332 	struct circ_buf *xmit = &port->state->xmit;
333 
334 	if (port->x_char) {
335 		/* Send special char - probably flow control */
336 		writeb(port->x_char, port->membase + MCFUART_UTB);
337 		port->x_char = 0;
338 		port->icount.tx++;
339 		return;
340 	}
341 
342 	while (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) {
343 		if (xmit->head == xmit->tail)
344 			break;
345 		writeb(xmit->buf[xmit->tail], port->membase + MCFUART_UTB);
346 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1);
347 		port->icount.tx++;
348 	}
349 
350 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
351 		uart_write_wakeup(port);
352 
353 	if (xmit->head == xmit->tail) {
354 		pp->imr &= ~MCFUART_UIR_TXREADY;
355 		writeb(pp->imr, port->membase + MCFUART_UIMR);
356 		/* Disable TX to negate RTS automatically */
357 		if (port->rs485.flags & SER_RS485_ENABLED)
358 			writeb(MCFUART_UCR_TXDISABLE,
359 				port->membase + MCFUART_UCR);
360 	}
361 }
362 
363 /****************************************************************************/
364 
365 static irqreturn_t mcf_interrupt(int irq, void *data)
366 {
367 	struct uart_port *port = data;
368 	struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
369 	unsigned int isr;
370 	irqreturn_t ret = IRQ_NONE;
371 
372 	isr = readb(port->membase + MCFUART_UISR) & pp->imr;
373 
374 	spin_lock(&port->lock);
375 	if (isr & MCFUART_UIR_RXREADY) {
376 		mcf_rx_chars(pp);
377 		ret = IRQ_HANDLED;
378 	}
379 	if (isr & MCFUART_UIR_TXREADY) {
380 		mcf_tx_chars(pp);
381 		ret = IRQ_HANDLED;
382 	}
383 	spin_unlock(&port->lock);
384 
385 	return ret;
386 }
387 
388 /****************************************************************************/
389 
390 static void mcf_config_port(struct uart_port *port, int flags)
391 {
392 	port->type = PORT_MCF;
393 	port->fifosize = MCFUART_TXFIFOSIZE;
394 
395 	/* Clear mask, so no surprise interrupts. */
396 	writeb(0, port->membase + MCFUART_UIMR);
397 
398 	if (request_irq(port->irq, mcf_interrupt, 0, "UART", port))
399 		printk(KERN_ERR "MCF: unable to attach ColdFire UART %d "
400 			"interrupt vector=%d\n", port->line, port->irq);
401 }
402 
403 /****************************************************************************/
404 
405 static const char *mcf_type(struct uart_port *port)
406 {
407 	return (port->type == PORT_MCF) ? "ColdFire UART" : NULL;
408 }
409 
410 /****************************************************************************/
411 
412 static int mcf_request_port(struct uart_port *port)
413 {
414 	/* UARTs always present */
415 	return 0;
416 }
417 
418 /****************************************************************************/
419 
420 static void mcf_release_port(struct uart_port *port)
421 {
422 	/* Nothing to release... */
423 }
424 
425 /****************************************************************************/
426 
427 static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser)
428 {
429 	if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_MCF))
430 		return -EINVAL;
431 	return 0;
432 }
433 
434 /****************************************************************************/
435 
436 /* Enable or disable the RS485 support */
437 static int mcf_config_rs485(struct uart_port *port, struct serial_rs485 *rs485)
438 {
439 	unsigned char mr1, mr2;
440 
441 	/* Get mode registers */
442 	mr1 = readb(port->membase + MCFUART_UMR);
443 	mr2 = readb(port->membase + MCFUART_UMR);
444 	if (rs485->flags & SER_RS485_ENABLED) {
445 		dev_dbg(port->dev, "Setting UART to RS485\n");
446 		/* Automatically negate RTS after TX completes */
447 		mr2 |= MCFUART_MR2_TXRTS;
448 	} else {
449 		dev_dbg(port->dev, "Setting UART to RS232\n");
450 		mr2 &= ~MCFUART_MR2_TXRTS;
451 	}
452 	writeb(mr1, port->membase + MCFUART_UMR);
453 	writeb(mr2, port->membase + MCFUART_UMR);
454 	port->rs485 = *rs485;
455 
456 	return 0;
457 }
458 
459 /****************************************************************************/
460 
461 /*
462  *	Define the basic serial functions we support.
463  */
464 static const struct uart_ops mcf_uart_ops = {
465 	.tx_empty	= mcf_tx_empty,
466 	.get_mctrl	= mcf_get_mctrl,
467 	.set_mctrl	= mcf_set_mctrl,
468 	.start_tx	= mcf_start_tx,
469 	.stop_tx	= mcf_stop_tx,
470 	.stop_rx	= mcf_stop_rx,
471 	.break_ctl	= mcf_break_ctl,
472 	.startup	= mcf_startup,
473 	.shutdown	= mcf_shutdown,
474 	.set_termios	= mcf_set_termios,
475 	.type		= mcf_type,
476 	.request_port	= mcf_request_port,
477 	.release_port	= mcf_release_port,
478 	.config_port	= mcf_config_port,
479 	.verify_port	= mcf_verify_port,
480 };
481 
482 static struct mcf_uart mcf_ports[4];
483 
484 #define	MCF_MAXPORTS	ARRAY_SIZE(mcf_ports)
485 
486 /****************************************************************************/
487 #if defined(CONFIG_SERIAL_MCF_CONSOLE)
488 /****************************************************************************/
489 
490 int __init early_mcf_setup(struct mcf_platform_uart *platp)
491 {
492 	struct uart_port *port;
493 	int i;
494 
495 	for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) {
496 		port = &mcf_ports[i].port;
497 
498 		port->line = i;
499 		port->type = PORT_MCF;
500 		port->mapbase = platp[i].mapbase;
501 		port->membase = (platp[i].membase) ? platp[i].membase :
502 			(unsigned char __iomem *) port->mapbase;
503 		port->iotype = SERIAL_IO_MEM;
504 		port->irq = platp[i].irq;
505 		port->uartclk = MCF_BUSCLK;
506 		port->flags = UPF_BOOT_AUTOCONF;
507 		port->rs485_config = mcf_config_rs485;
508 		port->ops = &mcf_uart_ops;
509 	}
510 
511 	return 0;
512 }
513 
514 /****************************************************************************/
515 
516 static void mcf_console_putc(struct console *co, const char c)
517 {
518 	struct uart_port *port = &(mcf_ports + co->index)->port;
519 	int i;
520 
521 	for (i = 0; (i < 0x10000); i++) {
522 		if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY)
523 			break;
524 	}
525 	writeb(c, port->membase + MCFUART_UTB);
526 	for (i = 0; (i < 0x10000); i++) {
527 		if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY)
528 			break;
529 	}
530 }
531 
532 /****************************************************************************/
533 
534 static void mcf_console_write(struct console *co, const char *s, unsigned int count)
535 {
536 	for (; (count); count--, s++) {
537 		mcf_console_putc(co, *s);
538 		if (*s == '\n')
539 			mcf_console_putc(co, '\r');
540 	}
541 }
542 
543 /****************************************************************************/
544 
545 static int __init mcf_console_setup(struct console *co, char *options)
546 {
547 	struct uart_port *port;
548 	int baud = CONFIG_SERIAL_MCF_BAUDRATE;
549 	int bits = 8;
550 	int parity = 'n';
551 	int flow = 'n';
552 
553 	if ((co->index < 0) || (co->index >= MCF_MAXPORTS))
554 		co->index = 0;
555 	port = &mcf_ports[co->index].port;
556 	if (port->membase == 0)
557 		return -ENODEV;
558 
559 	if (options)
560 		uart_parse_options(options, &baud, &parity, &bits, &flow);
561 
562 	return uart_set_options(port, co, baud, parity, bits, flow);
563 }
564 
565 /****************************************************************************/
566 
567 static struct uart_driver mcf_driver;
568 
569 static struct console mcf_console = {
570 	.name		= "ttyS",
571 	.write		= mcf_console_write,
572 	.device		= uart_console_device,
573 	.setup		= mcf_console_setup,
574 	.flags		= CON_PRINTBUFFER,
575 	.index		= -1,
576 	.data		= &mcf_driver,
577 };
578 
579 static int __init mcf_console_init(void)
580 {
581 	register_console(&mcf_console);
582 	return 0;
583 }
584 
585 console_initcall(mcf_console_init);
586 
587 #define	MCF_CONSOLE	&mcf_console
588 
589 /****************************************************************************/
590 #else
591 /****************************************************************************/
592 
593 #define	MCF_CONSOLE	NULL
594 
595 /****************************************************************************/
596 #endif /* CONFIG_SERIAL_MCF_CONSOLE */
597 /****************************************************************************/
598 
599 /*
600  *	Define the mcf UART driver structure.
601  */
602 static struct uart_driver mcf_driver = {
603 	.owner		= THIS_MODULE,
604 	.driver_name	= "mcf",
605 	.dev_name	= "ttyS",
606 	.major		= TTY_MAJOR,
607 	.minor		= 64,
608 	.nr		= MCF_MAXPORTS,
609 	.cons		= MCF_CONSOLE,
610 };
611 
612 /****************************************************************************/
613 
614 static int mcf_probe(struct platform_device *pdev)
615 {
616 	struct mcf_platform_uart *platp = dev_get_platdata(&pdev->dev);
617 	struct uart_port *port;
618 	int i;
619 
620 	for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) {
621 		port = &mcf_ports[i].port;
622 
623 		port->line = i;
624 		port->type = PORT_MCF;
625 		port->mapbase = platp[i].mapbase;
626 		port->membase = (platp[i].membase) ? platp[i].membase :
627 			(unsigned char __iomem *) platp[i].mapbase;
628 		port->dev = &pdev->dev;
629 		port->iotype = SERIAL_IO_MEM;
630 		port->irq = platp[i].irq;
631 		port->uartclk = MCF_BUSCLK;
632 		port->ops = &mcf_uart_ops;
633 		port->flags = UPF_BOOT_AUTOCONF;
634 		port->rs485_config = mcf_config_rs485;
635 		port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MCF_CONSOLE);
636 
637 		uart_add_one_port(&mcf_driver, port);
638 	}
639 
640 	return 0;
641 }
642 
643 /****************************************************************************/
644 
645 static int mcf_remove(struct platform_device *pdev)
646 {
647 	struct uart_port *port;
648 	int i;
649 
650 	for (i = 0; (i < MCF_MAXPORTS); i++) {
651 		port = &mcf_ports[i].port;
652 		if (port)
653 			uart_remove_one_port(&mcf_driver, port);
654 	}
655 
656 	return 0;
657 }
658 
659 /****************************************************************************/
660 
661 static struct platform_driver mcf_platform_driver = {
662 	.probe		= mcf_probe,
663 	.remove		= mcf_remove,
664 	.driver		= {
665 		.name	= "mcfuart",
666 	},
667 };
668 
669 /****************************************************************************/
670 
671 static int __init mcf_init(void)
672 {
673 	int rc;
674 
675 	printk("ColdFire internal UART serial driver\n");
676 
677 	rc = uart_register_driver(&mcf_driver);
678 	if (rc)
679 		return rc;
680 	rc = platform_driver_register(&mcf_platform_driver);
681 	if (rc) {
682 		uart_unregister_driver(&mcf_driver);
683 		return rc;
684 	}
685 	return 0;
686 }
687 
688 /****************************************************************************/
689 
690 static void __exit mcf_exit(void)
691 {
692 	platform_driver_unregister(&mcf_platform_driver);
693 	uart_unregister_driver(&mcf_driver);
694 }
695 
696 /****************************************************************************/
697 
698 module_init(mcf_init);
699 module_exit(mcf_exit);
700 
701 MODULE_AUTHOR("Greg Ungerer <gerg@uclinux.org>");
702 MODULE_DESCRIPTION("Freescale ColdFire UART driver");
703 MODULE_LICENSE("GPL");
704 MODULE_ALIAS("platform:mcfuart");
705 
706 /****************************************************************************/
707