1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  *  MA35D1 serial driver
4  *  Copyright (C) 2023 Nuvoton Technology Corp.
5  */
6 
7 #include <linux/bitfield.h>
8 #include <linux/clk.h>
9 #include <linux/delay.h>
10 #include <linux/of.h>
11 #include <linux/of_platform.h>
12 #include <linux/iopoll.h>
13 #include <linux/serial_core.h>
14 #include <linux/slab.h>
15 #include <linux/tty_flip.h>
16 #include <linux/units.h>
17 
18 #define MA35_UART_NR		17
19 
20 #define MA35_RBR_REG		0x00
21 #define MA35_THR_REG		0x00
22 #define MA35_IER_REG		0x04
23 #define MA35_FCR_REG		0x08
24 #define MA35_LCR_REG		0x0C
25 #define MA35_MCR_REG		0x10
26 #define MA35_MSR_REG		0x14
27 #define MA35_FSR_REG		0x18
28 #define MA35_ISR_REG		0x1C
29 #define MA35_TOR_REG		0x20
30 #define MA35_BAUD_REG		0x24
31 #define MA35_ALTCTL_REG		0x2C
32 #define MA35_FUN_SEL_REG	0x30
33 #define MA35_WKCTL_REG		0x40
34 #define MA35_WKSTS_REG		0x44
35 
36 /* MA35_IER_REG - Interrupt Enable Register */
37 #define MA35_IER_RDA_IEN	BIT(0)  /* RBR Available Interrupt Enable */
38 #define MA35_IER_THRE_IEN	BIT(1)  /* THR Empty Interrupt Enable */
39 #define MA35_IER_RLS_IEN	BIT(2)  /* RX Line Status Interrupt Enable */
40 #define MA35_IER_RTO_IEN	BIT(4)  /* RX Time-out Interrupt Enable */
41 #define MA35_IER_BUFERR_IEN	BIT(5)  /* Buffer Error Interrupt Enable */
42 #define MA35_IER_TIME_OUT_EN	BIT(11) /* RX Buffer Time-out Counter Enable */
43 #define MA35_IER_AUTO_RTS	BIT(12) /* nRTS Auto-flow Control Enable */
44 #define MA35_IER_AUTO_CTS	BIT(13) /* nCTS Auto-flow Control Enable */
45 
46 /* MA35_FCR_REG - FIFO Control Register */
47 #define MA35_FCR_RFR		BIT(1)  /* RX Field Software Reset */
48 #define MA35_FCR_TFR		BIT(2)  /* TX Field Software Reset */
49 #define MA35_FCR_RFITL_MASK	GENMASK(7, 4) /* RX FIFO Interrupt Trigger Level */
50 #define MA35_FCR_RFITL_1BYTE	FIELD_PREP(MA35_FCR_RFITL_MASK, 0)
51 #define MA35_FCR_RFITL_4BYTES	FIELD_PREP(MA35_FCR_RFITL_MASK, 1)
52 #define MA35_FCR_RFITL_8BYTES	FIELD_PREP(MA35_FCR_RFITL_MASK, 2)
53 #define MA35_FCR_RFITL_14BYTES	FIELD_PREP(MA35_FCR_RFITL_MASK, 3)
54 #define MA35_FCR_RFITL_30BYTES	FIELD_PREP(MA35_FCR_RFITL_MASK, 4)
55 #define MA35_FCR_RTSTL_MASK	GENMASK(19, 16) /* nRTS Trigger Level */
56 #define MA35_FCR_RTSTL_1BYTE	FIELD_PREP(MA35_FCR_RTSTL_MASK, 0)
57 #define MA35_FCR_RTSTL_4BYTES	FIELD_PREP(MA35_FCR_RTSTL_MASK, 1)
58 #define MA35_FCR_RTSTL_8BYTES	FIELD_PREP(MA35_FCR_RTSTL_MASK, 2)
59 #define MA35_FCR_RTSTL_14BYTES	FIELD_PREP(MA35_FCR_RTSTL_MASK, 3)
60 #define MA35_FCR_RTSTLL_30BYTES	FIELD_PREP(MA35_FCR_RTSTL_MASK, 4)
61 
62 /* MA35_LCR_REG - Line Control Register */
63 #define	MA35_LCR_NSB		BIT(2)  /* Number of “STOP Bit” */
64 #define MA35_LCR_PBE		BIT(3)  /* Parity Bit Enable */
65 #define MA35_LCR_EPE		BIT(4)  /* Even Parity Enable */
66 #define MA35_LCR_SPE		BIT(5)  /* Stick Parity Enable */
67 #define MA35_LCR_BREAK		BIT(6)  /* Break Control */
68 #define MA35_LCR_WLS_MASK	GENMASK(1, 0) /* Word Length Selection */
69 #define MA35_LCR_WLS_5BITS	FIELD_PREP(MA35_LCR_WLS_MASK, 0)
70 #define MA35_LCR_WLS_6BITS	FIELD_PREP(MA35_LCR_WLS_MASK, 1)
71 #define MA35_LCR_WLS_7BITS	FIELD_PREP(MA35_LCR_WLS_MASK, 2)
72 #define MA35_LCR_WLS_8BITS	FIELD_PREP(MA35_LCR_WLS_MASK, 3)
73 
74 /* MA35_MCR_REG - Modem Control Register */
75 #define MA35_MCR_RTS_CTRL	BIT(1)  /* nRTS Signal Control */
76 #define MA35_MCR_RTSACTLV	BIT(9)  /* nRTS Pin Active Level */
77 #define MA35_MCR_RTSSTS		BIT(13) /* nRTS Pin Status (Read Only) */
78 
79 /* MA35_MSR_REG - Modem Status Register */
80 #define MA35_MSR_CTSDETF	BIT(0)  /* Detect nCTS State Change Flag */
81 #define MA35_MSR_CTSSTS		BIT(4)  /* nCTS Pin Status (Read Only) */
82 #define MA35_MSR_CTSACTLV	BIT(8)  /* nCTS Pin Active Level */
83 
84 /* MA35_FSR_REG - FIFO Status Register */
85 #define MA35_FSR_RX_OVER_IF	BIT(0)  /* RX Overflow Error Interrupt Flag */
86 #define MA35_FSR_PEF		BIT(4)  /* Parity Error Flag*/
87 #define MA35_FSR_FEF		BIT(5)  /* Framing Error Flag */
88 #define MA35_FSR_BIF		BIT(6)  /* Break Interrupt Flag */
89 #define MA35_FSR_RX_EMPTY	BIT(14) /* Receiver FIFO Empty (Read Only) */
90 #define MA35_FSR_RX_FULL	BIT(15) /* Receiver FIFO Full (Read Only) */
91 #define MA35_FSR_TX_EMPTY	BIT(22) /* Transmitter FIFO Empty (Read Only) */
92 #define MA35_FSR_TX_FULL	BIT(23) /* Transmitter FIFO Full (Read Only) */
93 #define MA35_FSR_TX_OVER_IF	BIT(24) /* TX Overflow Error Interrupt Flag */
94 #define MA35_FSR_TE_FLAG	BIT(28) /* Transmitter Empty Flag (Read Only) */
95 #define MA35_FSR_RXPTR_MSK	GENMASK(13, 8) /* TX FIFO Pointer mask */
96 #define MA35_FSR_TXPTR_MSK	GENMASK(21, 16) /* RX FIFO Pointer mask */
97 
98 /* MA35_ISR_REG - Interrupt Status Register */
99 #define MA35_ISR_RDA_IF		BIT(0)  /* RBR Available Interrupt Flag */
100 #define MA35_ISR_THRE_IF	BIT(1)  /* THR Empty Interrupt Flag */
101 #define MA35_ISR_RLSIF		BIT(2)  /* Receive Line Interrupt Flag */
102 #define MA35_ISR_MODEMIF	BIT(3)  /* MODEM Interrupt Flag */
103 #define MA35_ISR_RXTO_IF	BIT(4)  /* RX Time-out Interrupt Flag */
104 #define MA35_ISR_BUFEIF		BIT(5)  /* Buffer Error Interrupt Flag */
105 #define MA35_ISR_WK_IF		BIT(6)  /* UART Wake-up Interrupt Flag */
106 #define MA35_ISR_RDAINT		BIT(8)  /* RBR Available Interrupt Indicator */
107 #define MA35_ISR_THRE_INT	BIT(9)  /* THR Empty Interrupt Indicator */
108 #define MA35_ISR_ALL		0xFFFFFFFF
109 
110 /* MA35_BAUD_REG - Baud Rate Divider Register */
111 #define	MA35_BAUD_MODE_MASK	GENMASK(29, 28)
112 #define MA35_BAUD_MODE0		FIELD_PREP(MA35_BAUD_MODE_MASK, 0)
113 #define MA35_BAUD_MODE1		FIELD_PREP(MA35_BAUD_MODE_MASK, 2)
114 #define MA35_BAUD_MODE2		FIELD_PREP(MA35_BAUD_MODE_MASK, 3)
115 #define	MA35_BAUD_MASK		GENMASK(15, 0)
116 
117 /* MA35_ALTCTL_REG - Alternate Control/Status Register */
118 #define MA35_ALTCTL_RS485AUD	BIT(10) /* RS-485 Auto Direction Function */
119 
120 /* MA35_FUN_SEL_REG - Function Select Register */
121 #define MA35_FUN_SEL_MASK	GENMASK(2, 0)
122 #define MA35_FUN_SEL_UART	FIELD_PREP(MA35_FUN_SEL_MASK, 0)
123 #define MA35_FUN_SEL_RS485	FIELD_PREP(MA35_FUN_SEL_MASK, 3)
124 
125 /* The constrain for MA35D1 UART baud rate divider */
126 #define MA35_BAUD_DIV_MAX	0xFFFF
127 #define MA35_BAUD_DIV_MIN	11
128 
129 /* UART FIFO depth */
130 #define MA35_UART_FIFO_DEPTH	32
131 /* UART console clock */
132 #define MA35_UART_CONSOLE_CLK	(24 * HZ_PER_MHZ)
133 /* UART register ioremap size */
134 #define MA35_UART_REG_SIZE	0x100
135 /* Rx Timeout */
136 #define MA35_UART_RX_TOUT	0x40
137 
138 #define MA35_IER_CONFIG		(MA35_IER_RTO_IEN | MA35_IER_RDA_IEN | \
139 				 MA35_IER_TIME_OUT_EN | MA35_IER_BUFERR_IEN)
140 
141 #define MA35_ISR_IF_CHECK	(MA35_ISR_RDA_IF | MA35_ISR_RXTO_IF | \
142 				 MA35_ISR_THRE_INT | MA35_ISR_BUFEIF)
143 
144 #define MA35_FSR_TX_BOTH_EMPTY	(MA35_FSR_TE_FLAG | MA35_FSR_TX_EMPTY)
145 
146 static struct uart_driver ma35d1serial_reg;
147 
148 struct uart_ma35d1_port {
149 	struct uart_port port;
150 	struct clk *clk;
151 	u16 capabilities; /* port capabilities */
152 	u8 ier;
153 	u8 lcr;
154 	u8 mcr;
155 	u32 baud_rate;
156 	u32 console_baud_rate;
157 	u32 console_line;
158 	u32 console_int;
159 };
160 
161 static struct uart_ma35d1_port ma35d1serial_ports[MA35_UART_NR];
162 
163 static struct uart_ma35d1_port *to_ma35d1_uart_port(struct uart_port *uart)
164 {
165 	return container_of(uart, struct uart_ma35d1_port, port);
166 }
167 
168 static u32 serial_in(struct uart_ma35d1_port *p, u32 offset)
169 {
170 	return readl_relaxed(p->port.membase + offset);
171 }
172 
173 static void serial_out(struct uart_ma35d1_port *p, u32 offset, u32 value)
174 {
175 	writel_relaxed(value, p->port.membase + offset);
176 }
177 
178 static void __stop_tx(struct uart_ma35d1_port *p)
179 {
180 	u32 ier;
181 
182 	ier = serial_in(p, MA35_IER_REG);
183 	if (ier & MA35_IER_THRE_IEN)
184 		serial_out(p, MA35_IER_REG, ier & ~MA35_IER_THRE_IEN);
185 }
186 
187 static void ma35d1serial_stop_tx(struct uart_port *port)
188 {
189 	struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
190 
191 	__stop_tx(up);
192 }
193 
194 static void transmit_chars(struct uart_ma35d1_port *up)
195 {
196 	u32 count;
197 	u8 ch;
198 
199 	if (uart_tx_stopped(&up->port)) {
200 		ma35d1serial_stop_tx(&up->port);
201 		return;
202 	}
203 	count = MA35_UART_FIFO_DEPTH - FIELD_GET(MA35_FSR_TXPTR_MSK,
204 						 serial_in(up, MA35_FSR_REG));
205 	uart_port_tx_limited(&up->port, ch, count,
206 			     !(serial_in(up, MA35_FSR_REG) & MA35_FSR_TX_FULL),
207 			     serial_out(up, MA35_THR_REG, ch),
208 			     ({}));
209 }
210 
211 static void ma35d1serial_start_tx(struct uart_port *port)
212 {
213 	struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
214 	u32 ier;
215 
216 	ier = serial_in(up, MA35_IER_REG);
217 	serial_out(up, MA35_IER_REG, ier & ~MA35_IER_THRE_IEN);
218 	transmit_chars(up);
219 	serial_out(up, MA35_IER_REG, ier | MA35_IER_THRE_IEN);
220 }
221 
222 static void ma35d1serial_stop_rx(struct uart_port *port)
223 {
224 	struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
225 	u32 ier;
226 
227 	ier = serial_in(up, MA35_IER_REG);
228 	ier &= ~MA35_IER_RDA_IEN;
229 	serial_out(up, MA35_IER_REG, ier);
230 }
231 
232 static void receive_chars(struct uart_ma35d1_port *up)
233 {
234 	int max_count = 256;
235 	u8 ch, flag;
236 	u32 fsr;
237 
238 	fsr = serial_in(up, MA35_FSR_REG);
239 	do {
240 		flag = TTY_NORMAL;
241 		up->port.icount.rx++;
242 
243 		if (unlikely(fsr & (MA35_FSR_BIF | MA35_FSR_FEF |
244 				    MA35_FSR_PEF | MA35_FSR_RX_OVER_IF))) {
245 			if (fsr & MA35_FSR_BIF) {
246 				up->port.icount.brk++;
247 				if (uart_handle_break(&up->port))
248 					continue;
249 			}
250 			if (fsr & MA35_FSR_FEF)
251 				up->port.icount.frame++;
252 			if (fsr & MA35_FSR_PEF)
253 				up->port.icount.parity++;
254 			if (fsr & MA35_FSR_RX_OVER_IF)
255 				up->port.icount.overrun++;
256 
257 			serial_out(up, MA35_FSR_REG,
258 				   fsr & (MA35_FSR_BIF | MA35_FSR_FEF |
259 					  MA35_FSR_PEF | MA35_FSR_RX_OVER_IF));
260 			if (fsr & MA35_FSR_BIF)
261 				flag = TTY_BREAK;
262 			else if (fsr & MA35_FSR_PEF)
263 				flag = TTY_PARITY;
264 			else if (fsr & MA35_FSR_FEF)
265 				flag = TTY_FRAME;
266 		}
267 
268 		ch = serial_in(up, MA35_RBR_REG);
269 		if (uart_handle_sysrq_char(&up->port, ch))
270 			continue;
271 
272 		spin_lock(&up->port.lock);
273 		uart_insert_char(&up->port, fsr, MA35_FSR_RX_OVER_IF, ch, flag);
274 		spin_unlock(&up->port.lock);
275 
276 		fsr = serial_in(up, MA35_FSR_REG);
277 	} while (!(fsr & MA35_FSR_RX_EMPTY) && (max_count-- > 0));
278 
279 	spin_lock(&up->port.lock);
280 	tty_flip_buffer_push(&up->port.state->port);
281 	spin_unlock(&up->port.lock);
282 }
283 
284 static irqreturn_t ma35d1serial_interrupt(int irq, void *dev_id)
285 {
286 	struct uart_port *port = dev_id;
287 	struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
288 	u32 isr, fsr;
289 
290 	isr = serial_in(up, MA35_ISR_REG);
291 	fsr = serial_in(up, MA35_FSR_REG);
292 
293 	if (!(isr & MA35_ISR_IF_CHECK))
294 		return IRQ_NONE;
295 
296 	if (isr & (MA35_ISR_RDA_IF | MA35_ISR_RXTO_IF))
297 		receive_chars(up);
298 	if (isr & MA35_ISR_THRE_INT)
299 		transmit_chars(up);
300 	if (fsr & MA35_FSR_TX_OVER_IF)
301 		serial_out(up, MA35_FSR_REG, MA35_FSR_TX_OVER_IF);
302 
303 	return IRQ_HANDLED;
304 }
305 
306 static u32 ma35d1serial_tx_empty(struct uart_port *port)
307 {
308 	struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
309 	u32 fsr;
310 
311 	fsr = serial_in(up, MA35_FSR_REG);
312 	if ((fsr & MA35_FSR_TX_BOTH_EMPTY) == MA35_FSR_TX_BOTH_EMPTY)
313 		return TIOCSER_TEMT;
314 	else
315 		return 0;
316 }
317 
318 static u32 ma35d1serial_get_mctrl(struct uart_port *port)
319 {
320 	struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
321 	u32 status;
322 	u32 ret = 0;
323 
324 	status = serial_in(up, MA35_MSR_REG);
325 	if (!(status & MA35_MSR_CTSSTS))
326 		ret |= TIOCM_CTS;
327 	return ret;
328 }
329 
330 static void ma35d1serial_set_mctrl(struct uart_port *port, u32 mctrl)
331 {
332 	struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
333 	u32 mcr, msr, ier;
334 
335 	mcr = serial_in(up, MA35_MCR_REG);
336 	mcr &= ~MA35_MCR_RTS_CTRL;
337 
338 	if (mctrl & TIOCM_RTS)
339 		mcr |= MA35_MCR_RTSACTLV;
340 	else
341 		mcr &= ~MA35_MCR_RTSACTLV;
342 
343 	if (up->mcr & UART_MCR_AFE) {
344 		ier = serial_in(up, MA35_IER_REG);
345 		ier |= MA35_IER_AUTO_RTS | MA35_IER_AUTO_CTS;
346 		serial_out(up, MA35_IER_REG, ier);
347 		up->port.flags |= UPF_HARD_FLOW;
348 	} else {
349 		ier = serial_in(up, MA35_IER_REG);
350 		ier &= ~(MA35_IER_AUTO_RTS | MA35_IER_AUTO_CTS);
351 		serial_out(up, MA35_IER_REG, ier);
352 		up->port.flags &= ~UPF_HARD_FLOW;
353 	}
354 
355 	msr = serial_in(up, MA35_MSR_REG);
356 	msr |= MA35_MSR_CTSACTLV;
357 	serial_out(up, MA35_MSR_REG, msr);
358 	serial_out(up, MA35_MCR_REG, mcr);
359 }
360 
361 static void ma35d1serial_break_ctl(struct uart_port *port, int break_state)
362 {
363 	struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
364 	unsigned long flags;
365 	u32 lcr;
366 
367 	spin_lock_irqsave(&up->port.lock, flags);
368 	lcr = serial_in(up, MA35_LCR_REG);
369 	if (break_state != 0)
370 		lcr |= MA35_LCR_BREAK;
371 	else
372 		lcr &= ~MA35_LCR_BREAK;
373 	serial_out(up, MA35_LCR_REG, lcr);
374 	spin_unlock_irqrestore(&up->port.lock, flags);
375 }
376 
377 static int ma35d1serial_startup(struct uart_port *port)
378 {
379 	struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
380 	u32 fcr;
381 	int retval;
382 
383 	/* Reset FIFO */
384 	serial_out(up, MA35_FCR_REG, MA35_FCR_TFR | MA35_FCR_RFR);
385 
386 	/* Clear pending interrupts */
387 	serial_out(up, MA35_ISR_REG, MA35_ISR_ALL);
388 
389 	retval = request_irq(port->irq, ma35d1serial_interrupt, 0,
390 			     dev_name(port->dev), port);
391 	if (retval) {
392 		dev_err(up->port.dev, "request irq failed.\n");
393 		return retval;
394 	}
395 
396 	fcr = serial_in(up, MA35_FCR_REG);
397 	fcr |= MA35_FCR_RFITL_4BYTES | MA35_FCR_RTSTL_8BYTES;
398 	serial_out(up, MA35_FCR_REG, fcr);
399 	serial_out(up, MA35_LCR_REG, MA35_LCR_WLS_8BITS);
400 	serial_out(up, MA35_TOR_REG, MA35_UART_RX_TOUT);
401 	serial_out(up, MA35_IER_REG, MA35_IER_CONFIG);
402 	return 0;
403 }
404 
405 static void ma35d1serial_shutdown(struct uart_port *port)
406 {
407 	struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
408 
409 	serial_out(up, MA35_IER_REG, 0);
410 	free_irq(port->irq, port);
411 }
412 
413 static void ma35d1serial_set_termios(struct uart_port *port,
414 				     struct ktermios *termios,
415 				     const struct ktermios *old)
416 {
417 	struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
418 	unsigned long flags;
419 	u32 baud, quot;
420 	u32 lcr = 0;
421 
422 	lcr = UART_LCR_WLEN(tty_get_char_size(termios->c_cflag));
423 
424 	if (termios->c_cflag & CSTOPB)
425 		lcr |= MA35_LCR_NSB;
426 	if (termios->c_cflag & PARENB)
427 		lcr |= MA35_LCR_PBE;
428 	if (!(termios->c_cflag & PARODD))
429 		lcr |= MA35_LCR_EPE;
430 	if (termios->c_cflag & CMSPAR)
431 		lcr |= MA35_LCR_SPE;
432 
433 	baud = uart_get_baud_rate(port, termios, old,
434 				  port->uartclk / MA35_BAUD_DIV_MAX,
435 				  port->uartclk / MA35_BAUD_DIV_MIN);
436 
437 	/* MA35D1 UART baud rate equation: baudrate = UART_CLK / (quot + 2) */
438 	quot = (port->uartclk / baud) - 2;
439 
440 	/*
441 	 * Ok, we're now changing the port state.  Do it with
442 	 * interrupts disabled.
443 	 */
444 	spin_lock_irqsave(&up->port.lock, flags);
445 
446 	up->port.read_status_mask = MA35_FSR_RX_OVER_IF;
447 	if (termios->c_iflag & INPCK)
448 		up->port.read_status_mask |= MA35_FSR_FEF | MA35_FSR_PEF;
449 	if (termios->c_iflag & (BRKINT | PARMRK))
450 		up->port.read_status_mask |= MA35_FSR_BIF;
451 
452 	/* Characteres to ignore */
453 	up->port.ignore_status_mask = 0;
454 	if (termios->c_iflag & IGNPAR)
455 		up->port.ignore_status_mask |= MA35_FSR_FEF | MA35_FSR_PEF;
456 	if (termios->c_iflag & IGNBRK) {
457 		up->port.ignore_status_mask |= MA35_FSR_BIF;
458 		/*
459 		 * If we're ignoring parity and break indicators,
460 		 * ignore overruns too (for real raw support).
461 		 */
462 		if (termios->c_iflag & IGNPAR)
463 			up->port.ignore_status_mask |= MA35_FSR_RX_OVER_IF;
464 	}
465 	if (termios->c_cflag & CRTSCTS)
466 		up->mcr |= UART_MCR_AFE;
467 	else
468 		up->mcr &= ~UART_MCR_AFE;
469 
470 	uart_update_timeout(port, termios->c_cflag, baud);
471 
472 	ma35d1serial_set_mctrl(&up->port, up->port.mctrl);
473 
474 	serial_out(up, MA35_BAUD_REG, MA35_BAUD_MODE2 | FIELD_PREP(MA35_BAUD_MASK, quot));
475 
476 	serial_out(up, MA35_LCR_REG, lcr);
477 
478 	spin_unlock_irqrestore(&up->port.lock, flags);
479 }
480 
481 static const char *ma35d1serial_type(struct uart_port *port)
482 {
483 	return "ma35d1-uart";
484 }
485 
486 static void ma35d1serial_config_port(struct uart_port *port, int flags)
487 {
488 	/*
489 	 * Driver core for serial ports forces a non-zero value for port type.
490 	 * Write an arbitrary value here to accommodate the serial core driver,
491 	 * as ID part of UAPI is redundant.
492 	 */
493 	port->type = 1;
494 }
495 
496 static int ma35d1serial_verify_port(struct uart_port *port, struct serial_struct *ser)
497 {
498 	if (port->type != PORT_UNKNOWN && ser->type != 1)
499 		return -EINVAL;
500 
501 	return 0;
502 }
503 
504 static const struct uart_ops ma35d1serial_ops = {
505 	.tx_empty     = ma35d1serial_tx_empty,
506 	.set_mctrl    = ma35d1serial_set_mctrl,
507 	.get_mctrl    = ma35d1serial_get_mctrl,
508 	.stop_tx      = ma35d1serial_stop_tx,
509 	.start_tx     = ma35d1serial_start_tx,
510 	.stop_rx      = ma35d1serial_stop_rx,
511 	.break_ctl    = ma35d1serial_break_ctl,
512 	.startup      = ma35d1serial_startup,
513 	.shutdown     = ma35d1serial_shutdown,
514 	.set_termios  = ma35d1serial_set_termios,
515 	.type         = ma35d1serial_type,
516 	.config_port  = ma35d1serial_config_port,
517 	.verify_port  = ma35d1serial_verify_port,
518 };
519 
520 static const struct of_device_id ma35d1_serial_of_match[] = {
521 	{ .compatible = "nuvoton,ma35d1-uart" },
522 	{},
523 };
524 MODULE_DEVICE_TABLE(of, ma35d1_serial_of_match);
525 
526 #ifdef CONFIG_SERIAL_NUVOTON_MA35D1_CONSOLE
527 
528 static struct device_node *ma35d1serial_uart_nodes[MA35_UART_NR];
529 
530 static void wait_for_xmitr(struct uart_ma35d1_port *up)
531 {
532 	unsigned int reg = 0;
533 
534 	read_poll_timeout_atomic(serial_in, reg, reg & MA35_FSR_TX_EMPTY,
535 				 1, 10000, false,
536 				 up, MA35_FSR_REG);
537 }
538 
539 static void ma35d1serial_console_putchar(struct uart_port *port, unsigned char ch)
540 {
541 	struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
542 
543 	wait_for_xmitr(up);
544 	serial_out(up, MA35_THR_REG, ch);
545 }
546 
547 /*
548  *  Print a string to the serial port trying not to disturb
549  *  any possible real use of the port...
550  *
551  *  The console_lock must be held when we get here.
552  */
553 static void ma35d1serial_console_write(struct console *co, const char *s, u32 count)
554 {
555 	struct uart_ma35d1_port *up = &ma35d1serial_ports[co->index];
556 	unsigned long flags;
557 	int locked = 1;
558 	u32 ier;
559 
560 	if (up->port.sysrq)
561 		locked = 0;
562 	else if (oops_in_progress)
563 		locked = spin_trylock_irqsave(&up->port.lock, flags);
564 	else
565 		spin_lock_irqsave(&up->port.lock, flags);
566 
567 	/*
568 	 *  First save the IER then disable the interrupts
569 	 */
570 	ier = serial_in(up, MA35_IER_REG);
571 	serial_out(up, MA35_IER_REG, 0);
572 
573 	uart_console_write(&up->port, s, count, ma35d1serial_console_putchar);
574 
575 	wait_for_xmitr(up);
576 	serial_out(up, MA35_IER_REG, ier);
577 
578 	if (locked)
579 		spin_unlock_irqrestore(&up->port.lock, flags);
580 }
581 
582 static int __init ma35d1serial_console_setup(struct console *co, char *options)
583 {
584 	struct device_node *np;
585 	struct uart_ma35d1_port *p;
586 	u32 val32[4];
587 	struct uart_port *port;
588 	int baud = 115200;
589 	int bits = 8;
590 	int parity = 'n';
591 	int flow = 'n';
592 
593 	if ((co->index < 0) || (co->index >= MA35_UART_NR)) {
594 		pr_debug("Console Port%x out of range\n", co->index);
595 		return -EINVAL;
596 	}
597 
598 	np = ma35d1serial_uart_nodes[co->index];
599 	p = &ma35d1serial_ports[co->index];
600 	if (!np || !p)
601 		return -ENODEV;
602 
603 	if (of_property_read_u32_array(np, "reg", val32, ARRAY_SIZE(val32)) != 0)
604 		return -EINVAL;
605 
606 	p->port.iobase = val32[1];
607 	p->port.membase = ioremap(p->port.iobase, MA35_UART_REG_SIZE);
608 	if (!p->port.membase)
609 		return -ENOMEM;
610 
611 	p->port.ops = &ma35d1serial_ops;
612 	p->port.line = 0;
613 	p->port.uartclk = MA35_UART_CONSOLE_CLK;
614 
615 	port = &ma35d1serial_ports[co->index].port;
616 
617 	if (options)
618 		uart_parse_options(options, &baud, &parity, &bits, &flow);
619 
620 	return uart_set_options(port, co, baud, parity, bits, flow);
621 }
622 
623 static struct console ma35d1serial_console = {
624 	.name    = "ttyNVT",
625 	.write   = ma35d1serial_console_write,
626 	.device  = uart_console_device,
627 	.setup   = ma35d1serial_console_setup,
628 	.flags   = CON_PRINTBUFFER | CON_ENABLED,
629 	.index   = -1,
630 	.data    = &ma35d1serial_reg,
631 };
632 
633 static void ma35d1serial_console_init_port(void)
634 {
635 	u32 i = 0;
636 	struct device_node *np;
637 
638 	for_each_matching_node(np, ma35d1_serial_of_match) {
639 		if (ma35d1serial_uart_nodes[i] == NULL) {
640 			of_node_get(np);
641 			ma35d1serial_uart_nodes[i] = np;
642 			i++;
643 			if (i == MA35_UART_NR)
644 				break;
645 		}
646 	}
647 }
648 
649 static int __init ma35d1serial_console_init(void)
650 {
651 	ma35d1serial_console_init_port();
652 	register_console(&ma35d1serial_console);
653 	return 0;
654 }
655 console_initcall(ma35d1serial_console_init);
656 
657 #define MA35D1SERIAL_CONSOLE    (&ma35d1serial_console)
658 #else
659 #define MA35D1SERIAL_CONSOLE    NULL
660 #endif
661 
662 static struct uart_driver ma35d1serial_reg = {
663 	.owner        = THIS_MODULE,
664 	.driver_name  = "serial",
665 	.dev_name     = "ttyNVT",
666 	.major        = TTY_MAJOR,
667 	.minor        = 64,
668 	.cons         = MA35D1SERIAL_CONSOLE,
669 	.nr           = MA35_UART_NR,
670 };
671 
672 /*
673  * Register a set of serial devices attached to a platform device.
674  * The list is terminated with a zero flags entry, which means we expect
675  * all entries to have at least UPF_BOOT_AUTOCONF set.
676  */
677 static int ma35d1serial_probe(struct platform_device *pdev)
678 {
679 	struct resource *res_mem;
680 	struct uart_ma35d1_port *up;
681 	int ret = 0;
682 
683 	if (pdev->dev.of_node) {
684 		ret = of_alias_get_id(pdev->dev.of_node, "serial");
685 		if (ret < 0) {
686 			dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n", ret);
687 			return ret;
688 		}
689 	}
690 	up = &ma35d1serial_ports[ret];
691 	up->port.line = ret;
692 	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
693 	if (!res_mem)
694 		return -ENODEV;
695 
696 	up->port.iobase = res_mem->start;
697 	up->port.membase = ioremap(up->port.iobase, MA35_UART_REG_SIZE);
698 	up->port.ops = &ma35d1serial_ops;
699 
700 	spin_lock_init(&up->port.lock);
701 
702 	up->clk = of_clk_get(pdev->dev.of_node, 0);
703 	if (IS_ERR(up->clk)) {
704 		ret = PTR_ERR(up->clk);
705 		dev_err(&pdev->dev, "failed to get core clk: %d\n", ret);
706 		goto err_iounmap;
707 	}
708 
709 	ret = clk_prepare_enable(up->clk);
710 	if (ret)
711 		goto err_iounmap;
712 
713 	if (up->port.line != 0)
714 		up->port.uartclk = clk_get_rate(up->clk);
715 
716 	ret = platform_get_irq(pdev, 0);
717 	if (ret < 0)
718 		goto err_clk_disable;
719 
720 	up->port.irq = ret;
721 	up->port.dev = &pdev->dev;
722 	up->port.flags = UPF_BOOT_AUTOCONF;
723 
724 	platform_set_drvdata(pdev, up);
725 
726 	ret = uart_add_one_port(&ma35d1serial_reg, &up->port);
727 	if (ret < 0)
728 		goto err_free_irq;
729 
730 	return 0;
731 
732 err_free_irq:
733 	free_irq(up->port.irq, &up->port);
734 
735 err_clk_disable:
736 	clk_disable_unprepare(up->clk);
737 
738 err_iounmap:
739 	iounmap(up->port.membase);
740 	return ret;
741 }
742 
743 /*
744  * Remove serial ports registered against a platform device.
745  */
746 static int ma35d1serial_remove(struct platform_device *dev)
747 {
748 	struct uart_port *port = platform_get_drvdata(dev);
749 	struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
750 
751 	uart_remove_one_port(&ma35d1serial_reg, port);
752 	clk_disable_unprepare(up->clk);
753 	return 0;
754 }
755 
756 static int ma35d1serial_suspend(struct platform_device *dev, pm_message_t state)
757 {
758 	struct uart_port *port = platform_get_drvdata(dev);
759 	struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
760 
761 	uart_suspend_port(&ma35d1serial_reg, &up->port);
762 	if (up->port.line == 0) {
763 		up->console_baud_rate = serial_in(up, MA35_BAUD_REG);
764 		up->console_line = serial_in(up, MA35_LCR_REG);
765 		up->console_int = serial_in(up, MA35_IER_REG);
766 	}
767 	return 0;
768 }
769 
770 static int ma35d1serial_resume(struct platform_device *dev)
771 {
772 	struct uart_port *port = platform_get_drvdata(dev);
773 	struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
774 
775 	if (up->port.line == 0) {
776 		serial_out(up, MA35_BAUD_REG, up->console_baud_rate);
777 		serial_out(up, MA35_LCR_REG, up->console_line);
778 		serial_out(up, MA35_IER_REG, up->console_int);
779 	}
780 	uart_resume_port(&ma35d1serial_reg, &up->port);
781 	return 0;
782 }
783 
784 static struct platform_driver ma35d1serial_driver = {
785 	.probe      = ma35d1serial_probe,
786 	.remove     = ma35d1serial_remove,
787 	.suspend    = ma35d1serial_suspend,
788 	.resume     = ma35d1serial_resume,
789 	.driver     = {
790 		.name   = "ma35d1-uart",
791 		.owner  = THIS_MODULE,
792 		.of_match_table = of_match_ptr(ma35d1_serial_of_match),
793 	},
794 };
795 
796 static int __init ma35d1serial_init(void)
797 {
798 	int ret;
799 
800 	ret = uart_register_driver(&ma35d1serial_reg);
801 	if (ret)
802 		return ret;
803 
804 	ret = platform_driver_register(&ma35d1serial_driver);
805 	if (ret)
806 		uart_unregister_driver(&ma35d1serial_reg);
807 
808 	return ret;
809 }
810 
811 static void __exit ma35d1serial_exit(void)
812 {
813 	platform_driver_unregister(&ma35d1serial_driver);
814 	uart_unregister_driver(&ma35d1serial_reg);
815 }
816 
817 module_init(ma35d1serial_init);
818 module_exit(ma35d1serial_exit);
819 
820 MODULE_LICENSE("GPL");
821 MODULE_DESCRIPTION("MA35D1 serial driver");
822