1 /* 2 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. 3 * 4 * This program is free software; you can redistribute it and/or modify it 5 * under the terms of the GNU General Public License version 2 as published 6 * by the Free Software Foundation. 7 * 8 * This program is distributed in the hope that it will be useful, 9 * but WITHOUT ANY WARRANTY; without even the implied warranty of 10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11 * GNU General Public License for more details. 12 * 13 * You should have received a copy of the GNU General Public License 14 * along with this program; if not, write to the Free Software 15 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 16 * 17 * Copyright (C) 2004 Infineon IFAP DC COM CPE 18 * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> 19 * Copyright (C) 2007 John Crispin <blogic@openwrt.org> 20 * Copyright (C) 2010 Thomas Langer, <thomas.langer@lantiq.com> 21 */ 22 23 #include <linux/slab.h> 24 #include <linux/ioport.h> 25 #include <linux/init.h> 26 #include <linux/console.h> 27 #include <linux/sysrq.h> 28 #include <linux/device.h> 29 #include <linux/tty.h> 30 #include <linux/tty_flip.h> 31 #include <linux/serial_core.h> 32 #include <linux/serial.h> 33 #include <linux/of_platform.h> 34 #include <linux/of_address.h> 35 #include <linux/of_irq.h> 36 #include <linux/io.h> 37 #include <linux/clk.h> 38 #include <linux/gpio.h> 39 40 #include <lantiq_soc.h> 41 42 #define PORT_LTQ_ASC 111 43 #define MAXPORTS 2 44 #define UART_DUMMY_UER_RX 1 45 #define DRVNAME "lantiq,asc" 46 #ifdef __BIG_ENDIAN 47 #define LTQ_ASC_TBUF (0x0020 + 3) 48 #define LTQ_ASC_RBUF (0x0024 + 3) 49 #else 50 #define LTQ_ASC_TBUF 0x0020 51 #define LTQ_ASC_RBUF 0x0024 52 #endif 53 #define LTQ_ASC_FSTAT 0x0048 54 #define LTQ_ASC_WHBSTATE 0x0018 55 #define LTQ_ASC_STATE 0x0014 56 #define LTQ_ASC_IRNCR 0x00F8 57 #define LTQ_ASC_CLC 0x0000 58 #define LTQ_ASC_ID 0x0008 59 #define LTQ_ASC_PISEL 0x0004 60 #define LTQ_ASC_TXFCON 0x0044 61 #define LTQ_ASC_RXFCON 0x0040 62 #define LTQ_ASC_CON 0x0010 63 #define LTQ_ASC_BG 0x0050 64 #define LTQ_ASC_IRNREN 0x00F4 65 66 #define ASC_IRNREN_TX 0x1 67 #define ASC_IRNREN_RX 0x2 68 #define ASC_IRNREN_ERR 0x4 69 #define ASC_IRNREN_TX_BUF 0x8 70 #define ASC_IRNCR_TIR 0x1 71 #define ASC_IRNCR_RIR 0x2 72 #define ASC_IRNCR_EIR 0x4 73 74 #define ASCOPT_CSIZE 0x3 75 #define TXFIFO_FL 1 76 #define RXFIFO_FL 1 77 #define ASCCLC_DISS 0x2 78 #define ASCCLC_RMCMASK 0x0000FF00 79 #define ASCCLC_RMCOFFSET 8 80 #define ASCCON_M_8ASYNC 0x0 81 #define ASCCON_M_7ASYNC 0x2 82 #define ASCCON_ODD 0x00000020 83 #define ASCCON_STP 0x00000080 84 #define ASCCON_BRS 0x00000100 85 #define ASCCON_FDE 0x00000200 86 #define ASCCON_R 0x00008000 87 #define ASCCON_FEN 0x00020000 88 #define ASCCON_ROEN 0x00080000 89 #define ASCCON_TOEN 0x00100000 90 #define ASCSTATE_PE 0x00010000 91 #define ASCSTATE_FE 0x00020000 92 #define ASCSTATE_ROE 0x00080000 93 #define ASCSTATE_ANY (ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE) 94 #define ASCWHBSTATE_CLRREN 0x00000001 95 #define ASCWHBSTATE_SETREN 0x00000002 96 #define ASCWHBSTATE_CLRPE 0x00000004 97 #define ASCWHBSTATE_CLRFE 0x00000008 98 #define ASCWHBSTATE_CLRROE 0x00000020 99 #define ASCTXFCON_TXFEN 0x0001 100 #define ASCTXFCON_TXFFLU 0x0002 101 #define ASCTXFCON_TXFITLMASK 0x3F00 102 #define ASCTXFCON_TXFITLOFF 8 103 #define ASCRXFCON_RXFEN 0x0001 104 #define ASCRXFCON_RXFFLU 0x0002 105 #define ASCRXFCON_RXFITLMASK 0x3F00 106 #define ASCRXFCON_RXFITLOFF 8 107 #define ASCFSTAT_RXFFLMASK 0x003F 108 #define ASCFSTAT_TXFFLMASK 0x3F00 109 #define ASCFSTAT_TXFREEMASK 0x3F000000 110 #define ASCFSTAT_TXFREEOFF 24 111 112 static void lqasc_tx_chars(struct uart_port *port); 113 static struct ltq_uart_port *lqasc_port[MAXPORTS]; 114 static struct uart_driver lqasc_reg; 115 static DEFINE_SPINLOCK(ltq_asc_lock); 116 117 struct ltq_uart_port { 118 struct uart_port port; 119 /* clock used to derive divider */ 120 struct clk *fpiclk; 121 /* clock gating of the ASC core */ 122 struct clk *clk; 123 unsigned int tx_irq; 124 unsigned int rx_irq; 125 unsigned int err_irq; 126 }; 127 128 static inline struct 129 ltq_uart_port *to_ltq_uart_port(struct uart_port *port) 130 { 131 return container_of(port, struct ltq_uart_port, port); 132 } 133 134 static void 135 lqasc_stop_tx(struct uart_port *port) 136 { 137 return; 138 } 139 140 static void 141 lqasc_start_tx(struct uart_port *port) 142 { 143 unsigned long flags; 144 spin_lock_irqsave(<q_asc_lock, flags); 145 lqasc_tx_chars(port); 146 spin_unlock_irqrestore(<q_asc_lock, flags); 147 return; 148 } 149 150 static void 151 lqasc_stop_rx(struct uart_port *port) 152 { 153 ltq_w32(ASCWHBSTATE_CLRREN, port->membase + LTQ_ASC_WHBSTATE); 154 } 155 156 static int 157 lqasc_rx_chars(struct uart_port *port) 158 { 159 struct tty_port *tport = &port->state->port; 160 unsigned int ch = 0, rsr = 0, fifocnt; 161 162 fifocnt = ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_RXFFLMASK; 163 while (fifocnt--) { 164 u8 flag = TTY_NORMAL; 165 ch = ltq_r8(port->membase + LTQ_ASC_RBUF); 166 rsr = (ltq_r32(port->membase + LTQ_ASC_STATE) 167 & ASCSTATE_ANY) | UART_DUMMY_UER_RX; 168 tty_flip_buffer_push(tport); 169 port->icount.rx++; 170 171 /* 172 * Note that the error handling code is 173 * out of the main execution path 174 */ 175 if (rsr & ASCSTATE_ANY) { 176 if (rsr & ASCSTATE_PE) { 177 port->icount.parity++; 178 ltq_w32_mask(0, ASCWHBSTATE_CLRPE, 179 port->membase + LTQ_ASC_WHBSTATE); 180 } else if (rsr & ASCSTATE_FE) { 181 port->icount.frame++; 182 ltq_w32_mask(0, ASCWHBSTATE_CLRFE, 183 port->membase + LTQ_ASC_WHBSTATE); 184 } 185 if (rsr & ASCSTATE_ROE) { 186 port->icount.overrun++; 187 ltq_w32_mask(0, ASCWHBSTATE_CLRROE, 188 port->membase + LTQ_ASC_WHBSTATE); 189 } 190 191 rsr &= port->read_status_mask; 192 193 if (rsr & ASCSTATE_PE) 194 flag = TTY_PARITY; 195 else if (rsr & ASCSTATE_FE) 196 flag = TTY_FRAME; 197 } 198 199 if ((rsr & port->ignore_status_mask) == 0) 200 tty_insert_flip_char(tport, ch, flag); 201 202 if (rsr & ASCSTATE_ROE) 203 /* 204 * Overrun is special, since it's reported 205 * immediately, and doesn't affect the current 206 * character 207 */ 208 tty_insert_flip_char(tport, 0, TTY_OVERRUN); 209 } 210 211 if (ch != 0) 212 tty_flip_buffer_push(tport); 213 214 return 0; 215 } 216 217 static void 218 lqasc_tx_chars(struct uart_port *port) 219 { 220 struct circ_buf *xmit = &port->state->xmit; 221 if (uart_tx_stopped(port)) { 222 lqasc_stop_tx(port); 223 return; 224 } 225 226 while (((ltq_r32(port->membase + LTQ_ASC_FSTAT) & 227 ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) { 228 if (port->x_char) { 229 ltq_w8(port->x_char, port->membase + LTQ_ASC_TBUF); 230 port->icount.tx++; 231 port->x_char = 0; 232 continue; 233 } 234 235 if (uart_circ_empty(xmit)) 236 break; 237 238 ltq_w8(port->state->xmit.buf[port->state->xmit.tail], 239 port->membase + LTQ_ASC_TBUF); 240 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); 241 port->icount.tx++; 242 } 243 244 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 245 uart_write_wakeup(port); 246 } 247 248 static irqreturn_t 249 lqasc_tx_int(int irq, void *_port) 250 { 251 unsigned long flags; 252 struct uart_port *port = (struct uart_port *)_port; 253 spin_lock_irqsave(<q_asc_lock, flags); 254 ltq_w32(ASC_IRNCR_TIR, port->membase + LTQ_ASC_IRNCR); 255 spin_unlock_irqrestore(<q_asc_lock, flags); 256 lqasc_start_tx(port); 257 return IRQ_HANDLED; 258 } 259 260 static irqreturn_t 261 lqasc_err_int(int irq, void *_port) 262 { 263 unsigned long flags; 264 struct uart_port *port = (struct uart_port *)_port; 265 spin_lock_irqsave(<q_asc_lock, flags); 266 /* clear any pending interrupts */ 267 ltq_w32_mask(0, ASCWHBSTATE_CLRPE | ASCWHBSTATE_CLRFE | 268 ASCWHBSTATE_CLRROE, port->membase + LTQ_ASC_WHBSTATE); 269 spin_unlock_irqrestore(<q_asc_lock, flags); 270 return IRQ_HANDLED; 271 } 272 273 static irqreturn_t 274 lqasc_rx_int(int irq, void *_port) 275 { 276 unsigned long flags; 277 struct uart_port *port = (struct uart_port *)_port; 278 spin_lock_irqsave(<q_asc_lock, flags); 279 ltq_w32(ASC_IRNCR_RIR, port->membase + LTQ_ASC_IRNCR); 280 lqasc_rx_chars(port); 281 spin_unlock_irqrestore(<q_asc_lock, flags); 282 return IRQ_HANDLED; 283 } 284 285 static unsigned int 286 lqasc_tx_empty(struct uart_port *port) 287 { 288 int status; 289 status = ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_TXFFLMASK; 290 return status ? 0 : TIOCSER_TEMT; 291 } 292 293 static unsigned int 294 lqasc_get_mctrl(struct uart_port *port) 295 { 296 return TIOCM_CTS | TIOCM_CAR | TIOCM_DSR; 297 } 298 299 static void 300 lqasc_set_mctrl(struct uart_port *port, u_int mctrl) 301 { 302 } 303 304 static void 305 lqasc_break_ctl(struct uart_port *port, int break_state) 306 { 307 } 308 309 static int 310 lqasc_startup(struct uart_port *port) 311 { 312 struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); 313 int retval; 314 315 if (!IS_ERR(ltq_port->clk)) 316 clk_enable(ltq_port->clk); 317 port->uartclk = clk_get_rate(ltq_port->fpiclk); 318 319 ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET), 320 port->membase + LTQ_ASC_CLC); 321 322 ltq_w32(0, port->membase + LTQ_ASC_PISEL); 323 ltq_w32( 324 ((TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) | 325 ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU, 326 port->membase + LTQ_ASC_TXFCON); 327 ltq_w32( 328 ((RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK) 329 | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU, 330 port->membase + LTQ_ASC_RXFCON); 331 /* make sure other settings are written to hardware before 332 * setting enable bits 333 */ 334 wmb(); 335 ltq_w32_mask(0, ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN | 336 ASCCON_ROEN, port->membase + LTQ_ASC_CON); 337 338 retval = request_irq(ltq_port->tx_irq, lqasc_tx_int, 339 0, "asc_tx", port); 340 if (retval) { 341 pr_err("failed to request lqasc_tx_int\n"); 342 return retval; 343 } 344 345 retval = request_irq(ltq_port->rx_irq, lqasc_rx_int, 346 0, "asc_rx", port); 347 if (retval) { 348 pr_err("failed to request lqasc_rx_int\n"); 349 goto err1; 350 } 351 352 retval = request_irq(ltq_port->err_irq, lqasc_err_int, 353 0, "asc_err", port); 354 if (retval) { 355 pr_err("failed to request lqasc_err_int\n"); 356 goto err2; 357 } 358 359 ltq_w32(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX, 360 port->membase + LTQ_ASC_IRNREN); 361 return 0; 362 363 err2: 364 free_irq(ltq_port->rx_irq, port); 365 err1: 366 free_irq(ltq_port->tx_irq, port); 367 return retval; 368 } 369 370 static void 371 lqasc_shutdown(struct uart_port *port) 372 { 373 struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); 374 free_irq(ltq_port->tx_irq, port); 375 free_irq(ltq_port->rx_irq, port); 376 free_irq(ltq_port->err_irq, port); 377 378 ltq_w32(0, port->membase + LTQ_ASC_CON); 379 ltq_w32_mask(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU, 380 port->membase + LTQ_ASC_RXFCON); 381 ltq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU, 382 port->membase + LTQ_ASC_TXFCON); 383 if (!IS_ERR(ltq_port->clk)) 384 clk_disable(ltq_port->clk); 385 } 386 387 static void 388 lqasc_set_termios(struct uart_port *port, 389 struct ktermios *new, struct ktermios *old) 390 { 391 unsigned int cflag; 392 unsigned int iflag; 393 unsigned int divisor; 394 unsigned int baud; 395 unsigned int con = 0; 396 unsigned long flags; 397 398 cflag = new->c_cflag; 399 iflag = new->c_iflag; 400 401 switch (cflag & CSIZE) { 402 case CS7: 403 con = ASCCON_M_7ASYNC; 404 break; 405 406 case CS5: 407 case CS6: 408 default: 409 new->c_cflag &= ~ CSIZE; 410 new->c_cflag |= CS8; 411 con = ASCCON_M_8ASYNC; 412 break; 413 } 414 415 cflag &= ~CMSPAR; /* Mark/Space parity is not supported */ 416 417 if (cflag & CSTOPB) 418 con |= ASCCON_STP; 419 420 if (cflag & PARENB) { 421 if (!(cflag & PARODD)) 422 con &= ~ASCCON_ODD; 423 else 424 con |= ASCCON_ODD; 425 } 426 427 port->read_status_mask = ASCSTATE_ROE; 428 if (iflag & INPCK) 429 port->read_status_mask |= ASCSTATE_FE | ASCSTATE_PE; 430 431 port->ignore_status_mask = 0; 432 if (iflag & IGNPAR) 433 port->ignore_status_mask |= ASCSTATE_FE | ASCSTATE_PE; 434 435 if (iflag & IGNBRK) { 436 /* 437 * If we're ignoring parity and break indicators, 438 * ignore overruns too (for real raw support). 439 */ 440 if (iflag & IGNPAR) 441 port->ignore_status_mask |= ASCSTATE_ROE; 442 } 443 444 if ((cflag & CREAD) == 0) 445 port->ignore_status_mask |= UART_DUMMY_UER_RX; 446 447 /* set error signals - framing, parity and overrun, enable receiver */ 448 con |= ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN; 449 450 spin_lock_irqsave(<q_asc_lock, flags); 451 452 /* set up CON */ 453 ltq_w32_mask(0, con, port->membase + LTQ_ASC_CON); 454 455 /* Set baud rate - take a divider of 2 into account */ 456 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); 457 divisor = uart_get_divisor(port, baud); 458 divisor = divisor / 2 - 1; 459 460 /* disable the baudrate generator */ 461 ltq_w32_mask(ASCCON_R, 0, port->membase + LTQ_ASC_CON); 462 463 /* make sure the fractional divider is off */ 464 ltq_w32_mask(ASCCON_FDE, 0, port->membase + LTQ_ASC_CON); 465 466 /* set up to use divisor of 2 */ 467 ltq_w32_mask(ASCCON_BRS, 0, port->membase + LTQ_ASC_CON); 468 469 /* now we can write the new baudrate into the register */ 470 ltq_w32(divisor, port->membase + LTQ_ASC_BG); 471 472 /* turn the baudrate generator back on */ 473 ltq_w32_mask(0, ASCCON_R, port->membase + LTQ_ASC_CON); 474 475 /* enable rx */ 476 ltq_w32(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE); 477 478 spin_unlock_irqrestore(<q_asc_lock, flags); 479 480 /* Don't rewrite B0 */ 481 if (tty_termios_baud_rate(new)) 482 tty_termios_encode_baud_rate(new, baud, baud); 483 484 uart_update_timeout(port, cflag, baud); 485 } 486 487 static const char* 488 lqasc_type(struct uart_port *port) 489 { 490 if (port->type == PORT_LTQ_ASC) 491 return DRVNAME; 492 else 493 return NULL; 494 } 495 496 static void 497 lqasc_release_port(struct uart_port *port) 498 { 499 struct platform_device *pdev = to_platform_device(port->dev); 500 501 if (port->flags & UPF_IOREMAP) { 502 devm_iounmap(&pdev->dev, port->membase); 503 port->membase = NULL; 504 } 505 } 506 507 static int 508 lqasc_request_port(struct uart_port *port) 509 { 510 struct platform_device *pdev = to_platform_device(port->dev); 511 struct resource *res; 512 int size; 513 514 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 515 if (!res) { 516 dev_err(&pdev->dev, "cannot obtain I/O memory region"); 517 return -ENODEV; 518 } 519 size = resource_size(res); 520 521 res = devm_request_mem_region(&pdev->dev, res->start, 522 size, dev_name(&pdev->dev)); 523 if (!res) { 524 dev_err(&pdev->dev, "cannot request I/O memory region"); 525 return -EBUSY; 526 } 527 528 if (port->flags & UPF_IOREMAP) { 529 port->membase = devm_ioremap_nocache(&pdev->dev, 530 port->mapbase, size); 531 if (port->membase == NULL) 532 return -ENOMEM; 533 } 534 return 0; 535 } 536 537 static void 538 lqasc_config_port(struct uart_port *port, int flags) 539 { 540 if (flags & UART_CONFIG_TYPE) { 541 port->type = PORT_LTQ_ASC; 542 lqasc_request_port(port); 543 } 544 } 545 546 static int 547 lqasc_verify_port(struct uart_port *port, 548 struct serial_struct *ser) 549 { 550 int ret = 0; 551 if (ser->type != PORT_UNKNOWN && ser->type != PORT_LTQ_ASC) 552 ret = -EINVAL; 553 if (ser->irq < 0 || ser->irq >= NR_IRQS) 554 ret = -EINVAL; 555 if (ser->baud_base < 9600) 556 ret = -EINVAL; 557 return ret; 558 } 559 560 static struct uart_ops lqasc_pops = { 561 .tx_empty = lqasc_tx_empty, 562 .set_mctrl = lqasc_set_mctrl, 563 .get_mctrl = lqasc_get_mctrl, 564 .stop_tx = lqasc_stop_tx, 565 .start_tx = lqasc_start_tx, 566 .stop_rx = lqasc_stop_rx, 567 .break_ctl = lqasc_break_ctl, 568 .startup = lqasc_startup, 569 .shutdown = lqasc_shutdown, 570 .set_termios = lqasc_set_termios, 571 .type = lqasc_type, 572 .release_port = lqasc_release_port, 573 .request_port = lqasc_request_port, 574 .config_port = lqasc_config_port, 575 .verify_port = lqasc_verify_port, 576 }; 577 578 static void 579 lqasc_console_putchar(struct uart_port *port, int ch) 580 { 581 int fifofree; 582 583 if (!port->membase) 584 return; 585 586 do { 587 fifofree = (ltq_r32(port->membase + LTQ_ASC_FSTAT) 588 & ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF; 589 } while (fifofree == 0); 590 ltq_w8(ch, port->membase + LTQ_ASC_TBUF); 591 } 592 593 594 static void 595 lqasc_console_write(struct console *co, const char *s, u_int count) 596 { 597 struct ltq_uart_port *ltq_port; 598 struct uart_port *port; 599 unsigned long flags; 600 601 if (co->index >= MAXPORTS) 602 return; 603 604 ltq_port = lqasc_port[co->index]; 605 if (!ltq_port) 606 return; 607 608 port = <q_port->port; 609 610 spin_lock_irqsave(<q_asc_lock, flags); 611 uart_console_write(port, s, count, lqasc_console_putchar); 612 spin_unlock_irqrestore(<q_asc_lock, flags); 613 } 614 615 static int __init 616 lqasc_console_setup(struct console *co, char *options) 617 { 618 struct ltq_uart_port *ltq_port; 619 struct uart_port *port; 620 int baud = 115200; 621 int bits = 8; 622 int parity = 'n'; 623 int flow = 'n'; 624 625 if (co->index >= MAXPORTS) 626 return -ENODEV; 627 628 ltq_port = lqasc_port[co->index]; 629 if (!ltq_port) 630 return -ENODEV; 631 632 port = <q_port->port; 633 634 if (!IS_ERR(ltq_port->clk)) 635 clk_enable(ltq_port->clk); 636 637 port->uartclk = clk_get_rate(ltq_port->fpiclk); 638 639 if (options) 640 uart_parse_options(options, &baud, &parity, &bits, &flow); 641 return uart_set_options(port, co, baud, parity, bits, flow); 642 } 643 644 static struct console lqasc_console = { 645 .name = "ttyLTQ", 646 .write = lqasc_console_write, 647 .device = uart_console_device, 648 .setup = lqasc_console_setup, 649 .flags = CON_PRINTBUFFER, 650 .index = -1, 651 .data = &lqasc_reg, 652 }; 653 654 static int __init 655 lqasc_console_init(void) 656 { 657 register_console(&lqasc_console); 658 return 0; 659 } 660 console_initcall(lqasc_console_init); 661 662 static struct uart_driver lqasc_reg = { 663 .owner = THIS_MODULE, 664 .driver_name = DRVNAME, 665 .dev_name = "ttyLTQ", 666 .major = 0, 667 .minor = 0, 668 .nr = MAXPORTS, 669 .cons = &lqasc_console, 670 }; 671 672 static int __init 673 lqasc_probe(struct platform_device *pdev) 674 { 675 struct device_node *node = pdev->dev.of_node; 676 struct ltq_uart_port *ltq_port; 677 struct uart_port *port; 678 struct resource *mmres, irqres[3]; 679 int line = 0; 680 int ret; 681 682 mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); 683 ret = of_irq_to_resource_table(node, irqres, 3); 684 if (!mmres || (ret != 3)) { 685 dev_err(&pdev->dev, 686 "failed to get memory/irq for serial port\n"); 687 return -ENODEV; 688 } 689 690 /* check if this is the console port */ 691 if (mmres->start != CPHYSADDR(LTQ_EARLY_ASC)) 692 line = 1; 693 694 if (lqasc_port[line]) { 695 dev_err(&pdev->dev, "port %d already allocated\n", line); 696 return -EBUSY; 697 } 698 699 ltq_port = devm_kzalloc(&pdev->dev, sizeof(struct ltq_uart_port), 700 GFP_KERNEL); 701 if (!ltq_port) 702 return -ENOMEM; 703 704 port = <q_port->port; 705 706 port->iotype = SERIAL_IO_MEM; 707 port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; 708 port->ops = &lqasc_pops; 709 port->fifosize = 16; 710 port->type = PORT_LTQ_ASC, 711 port->line = line; 712 port->dev = &pdev->dev; 713 /* unused, just to be backward-compatible */ 714 port->irq = irqres[0].start; 715 port->mapbase = mmres->start; 716 717 ltq_port->fpiclk = clk_get_fpi(); 718 if (IS_ERR(ltq_port->fpiclk)) { 719 pr_err("failed to get fpi clk\n"); 720 return -ENOENT; 721 } 722 723 /* not all asc ports have clock gates, lets ignore the return code */ 724 ltq_port->clk = clk_get(&pdev->dev, NULL); 725 726 ltq_port->tx_irq = irqres[0].start; 727 ltq_port->rx_irq = irqres[1].start; 728 ltq_port->err_irq = irqres[2].start; 729 730 lqasc_port[line] = ltq_port; 731 platform_set_drvdata(pdev, ltq_port); 732 733 ret = uart_add_one_port(&lqasc_reg, port); 734 735 return ret; 736 } 737 738 static const struct of_device_id ltq_asc_match[] = { 739 { .compatible = DRVNAME }, 740 {}, 741 }; 742 743 static struct platform_driver lqasc_driver = { 744 .driver = { 745 .name = DRVNAME, 746 .of_match_table = ltq_asc_match, 747 }, 748 }; 749 750 int __init 751 init_lqasc(void) 752 { 753 int ret; 754 755 ret = uart_register_driver(&lqasc_reg); 756 if (ret != 0) 757 return ret; 758 759 ret = platform_driver_probe(&lqasc_driver, lqasc_probe); 760 if (ret != 0) 761 uart_unregister_driver(&lqasc_reg); 762 763 return ret; 764 } 765 device_initcall(init_lqasc); 766