1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * KGDB NMI serial console 4 * 5 * Copyright 2010 Google, Inc. 6 * Arve Hjønnevåg <arve@android.com> 7 * Colin Cross <ccross@android.com> 8 * Copyright 2012 Linaro Ltd. 9 * Anton Vorontsov <anton.vorontsov@linaro.org> 10 */ 11 12 #include <linux/kernel.h> 13 #include <linux/module.h> 14 #include <linux/compiler.h> 15 #include <linux/slab.h> 16 #include <linux/errno.h> 17 #include <linux/atomic.h> 18 #include <linux/console.h> 19 #include <linux/tty.h> 20 #include <linux/tty_driver.h> 21 #include <linux/tty_flip.h> 22 #include <linux/serial_core.h> 23 #include <linux/interrupt.h> 24 #include <linux/hrtimer.h> 25 #include <linux/tick.h> 26 #include <linux/kfifo.h> 27 #include <linux/kgdb.h> 28 #include <linux/kdb.h> 29 30 static int kgdb_nmi_knock = 1; 31 module_param_named(knock, kgdb_nmi_knock, int, 0600); 32 MODULE_PARM_DESC(knock, "if set to 1 (default), the special '$3#33' command " \ 33 "must be used to enter the debugger; when set to 0, " \ 34 "hitting return key is enough to enter the debugger; " \ 35 "when set to -1, the debugger is entered immediately " \ 36 "upon NMI"); 37 38 static char *kgdb_nmi_magic = "$3#33"; 39 module_param_named(magic, kgdb_nmi_magic, charp, 0600); 40 MODULE_PARM_DESC(magic, "magic sequence to enter NMI debugger (default $3#33)"); 41 42 static atomic_t kgdb_nmi_num_readers = ATOMIC_INIT(0); 43 44 static int kgdb_nmi_console_setup(struct console *co, char *options) 45 { 46 arch_kgdb_ops.enable_nmi(1); 47 48 /* The NMI console uses the dbg_io_ops to issue console messages. To 49 * avoid duplicate messages during kdb sessions we must inform kdb's 50 * I/O utilities that messages sent to the console will automatically 51 * be displayed on the dbg_io. 52 */ 53 dbg_io_ops->cons = co; 54 55 return 0; 56 } 57 58 static void kgdb_nmi_console_write(struct console *co, const char *s, uint c) 59 { 60 int i; 61 62 for (i = 0; i < c; i++) 63 dbg_io_ops->write_char(s[i]); 64 } 65 66 static struct tty_driver *kgdb_nmi_tty_driver; 67 68 static struct tty_driver *kgdb_nmi_console_device(struct console *co, int *idx) 69 { 70 *idx = co->index; 71 return kgdb_nmi_tty_driver; 72 } 73 74 static struct console kgdb_nmi_console = { 75 .name = "ttyNMI", 76 .setup = kgdb_nmi_console_setup, 77 .write = kgdb_nmi_console_write, 78 .device = kgdb_nmi_console_device, 79 .flags = CON_PRINTBUFFER | CON_ANYTIME, 80 .index = -1, 81 }; 82 83 /* 84 * This is usually the maximum rate on debug ports. We make fifo large enough 85 * to make copy-pasting to the terminal usable. 86 */ 87 #define KGDB_NMI_BAUD 115200 88 #define KGDB_NMI_FIFO_SIZE roundup_pow_of_two(KGDB_NMI_BAUD / 8 / HZ) 89 90 struct kgdb_nmi_tty_priv { 91 struct tty_port port; 92 struct timer_list timer; 93 STRUCT_KFIFO(char, KGDB_NMI_FIFO_SIZE) fifo; 94 }; 95 96 static struct tty_port *kgdb_nmi_port; 97 98 static void kgdb_tty_recv(int ch) 99 { 100 struct kgdb_nmi_tty_priv *priv; 101 char c = ch; 102 103 if (!kgdb_nmi_port || ch < 0) 104 return; 105 /* 106 * Can't use port->tty->driver_data as tty might be not there. Timer 107 * will check for tty and will get the ref, but here we don't have to 108 * do that, and actually, we can't: we're in NMI context, no locks are 109 * possible. 110 */ 111 priv = container_of(kgdb_nmi_port, struct kgdb_nmi_tty_priv, port); 112 kfifo_in(&priv->fifo, &c, 1); 113 } 114 115 static int kgdb_nmi_poll_one_knock(void) 116 { 117 static int n; 118 int c = -1; 119 const char *magic = kgdb_nmi_magic; 120 size_t m = strlen(magic); 121 bool printch = false; 122 123 c = dbg_io_ops->read_char(); 124 if (c == NO_POLL_CHAR) 125 return c; 126 127 if (!kgdb_nmi_knock && (c == '\r' || c == '\n')) { 128 return 1; 129 } else if (c == magic[n]) { 130 n = (n + 1) % m; 131 if (!n) 132 return 1; 133 printch = true; 134 } else { 135 n = 0; 136 } 137 138 if (atomic_read(&kgdb_nmi_num_readers)) { 139 kgdb_tty_recv(c); 140 return 0; 141 } 142 143 if (printch) { 144 kdb_printf("%c", c); 145 return 0; 146 } 147 148 kdb_printf("\r%s %s to enter the debugger> %*s", 149 kgdb_nmi_knock ? "Type" : "Hit", 150 kgdb_nmi_knock ? magic : "<return>", (int)m, ""); 151 while (m--) 152 kdb_printf("\b"); 153 return 0; 154 } 155 156 /** 157 * kgdb_nmi_poll_knock - Check if it is time to enter the debugger 158 * 159 * "Serial ports are often noisy, especially when muxed over another port (we 160 * often use serial over the headset connector). Noise on the async command 161 * line just causes characters that are ignored, on a command line that blocked 162 * execution noise would be catastrophic." -- Colin Cross 163 * 164 * So, this function implements KGDB/KDB knocking on the serial line: we won't 165 * enter the debugger until we receive a known magic phrase (which is actually 166 * "$3#33", known as "escape to KDB" command. There is also a relaxed variant 167 * of knocking, i.e. just pressing the return key is enough to enter the 168 * debugger. And if knocking is disabled, the function always returns 1. 169 */ 170 bool kgdb_nmi_poll_knock(void) 171 { 172 if (kgdb_nmi_knock < 0) 173 return true; 174 175 while (1) { 176 int ret; 177 178 ret = kgdb_nmi_poll_one_knock(); 179 if (ret == NO_POLL_CHAR) 180 return false; 181 else if (ret == 1) 182 break; 183 } 184 return true; 185 } 186 187 /* 188 * The tasklet is cheap, it does not cause wakeups when reschedules itself, 189 * instead it waits for the next tick. 190 */ 191 static void kgdb_nmi_tty_receiver(struct timer_list *t) 192 { 193 struct kgdb_nmi_tty_priv *priv = from_timer(priv, t, timer); 194 char ch; 195 196 priv->timer.expires = jiffies + (HZ/100); 197 add_timer(&priv->timer); 198 199 if (likely(!atomic_read(&kgdb_nmi_num_readers) || 200 !kfifo_len(&priv->fifo))) 201 return; 202 203 while (kfifo_out(&priv->fifo, &ch, 1)) 204 tty_insert_flip_char(&priv->port, ch, TTY_NORMAL); 205 tty_flip_buffer_push(&priv->port); 206 } 207 208 static int kgdb_nmi_tty_activate(struct tty_port *port, struct tty_struct *tty) 209 { 210 struct kgdb_nmi_tty_priv *priv = 211 container_of(port, struct kgdb_nmi_tty_priv, port); 212 213 kgdb_nmi_port = port; 214 priv->timer.expires = jiffies + (HZ/100); 215 add_timer(&priv->timer); 216 217 return 0; 218 } 219 220 static void kgdb_nmi_tty_shutdown(struct tty_port *port) 221 { 222 struct kgdb_nmi_tty_priv *priv = 223 container_of(port, struct kgdb_nmi_tty_priv, port); 224 225 del_timer(&priv->timer); 226 kgdb_nmi_port = NULL; 227 } 228 229 static const struct tty_port_operations kgdb_nmi_tty_port_ops = { 230 .activate = kgdb_nmi_tty_activate, 231 .shutdown = kgdb_nmi_tty_shutdown, 232 }; 233 234 static int kgdb_nmi_tty_install(struct tty_driver *drv, struct tty_struct *tty) 235 { 236 struct kgdb_nmi_tty_priv *priv; 237 int ret; 238 239 priv = kzalloc(sizeof(*priv), GFP_KERNEL); 240 if (!priv) 241 return -ENOMEM; 242 243 INIT_KFIFO(priv->fifo); 244 timer_setup(&priv->timer, kgdb_nmi_tty_receiver, 0); 245 tty_port_init(&priv->port); 246 priv->port.ops = &kgdb_nmi_tty_port_ops; 247 tty->driver_data = priv; 248 249 ret = tty_port_install(&priv->port, drv, tty); 250 if (ret) { 251 pr_err("%s: can't install tty port: %d\n", __func__, ret); 252 goto err; 253 } 254 return 0; 255 err: 256 tty_port_destroy(&priv->port); 257 kfree(priv); 258 return ret; 259 } 260 261 static void kgdb_nmi_tty_cleanup(struct tty_struct *tty) 262 { 263 struct kgdb_nmi_tty_priv *priv = tty->driver_data; 264 265 tty->driver_data = NULL; 266 tty_port_destroy(&priv->port); 267 kfree(priv); 268 } 269 270 static int kgdb_nmi_tty_open(struct tty_struct *tty, struct file *file) 271 { 272 struct kgdb_nmi_tty_priv *priv = tty->driver_data; 273 unsigned int mode = file->f_flags & O_ACCMODE; 274 int ret; 275 276 ret = tty_port_open(&priv->port, tty, file); 277 if (!ret && (mode == O_RDONLY || mode == O_RDWR)) 278 atomic_inc(&kgdb_nmi_num_readers); 279 280 return ret; 281 } 282 283 static void kgdb_nmi_tty_close(struct tty_struct *tty, struct file *file) 284 { 285 struct kgdb_nmi_tty_priv *priv = tty->driver_data; 286 unsigned int mode = file->f_flags & O_ACCMODE; 287 288 if (mode == O_RDONLY || mode == O_RDWR) 289 atomic_dec(&kgdb_nmi_num_readers); 290 291 tty_port_close(&priv->port, tty, file); 292 } 293 294 static void kgdb_nmi_tty_hangup(struct tty_struct *tty) 295 { 296 struct kgdb_nmi_tty_priv *priv = tty->driver_data; 297 298 tty_port_hangup(&priv->port); 299 } 300 301 static int kgdb_nmi_tty_write_room(struct tty_struct *tty) 302 { 303 /* Actually, we can handle any amount as we use polled writes. */ 304 return 2048; 305 } 306 307 static int kgdb_nmi_tty_write(struct tty_struct *tty, const unchar *buf, int c) 308 { 309 int i; 310 311 for (i = 0; i < c; i++) 312 dbg_io_ops->write_char(buf[i]); 313 return c; 314 } 315 316 static const struct tty_operations kgdb_nmi_tty_ops = { 317 .open = kgdb_nmi_tty_open, 318 .close = kgdb_nmi_tty_close, 319 .install = kgdb_nmi_tty_install, 320 .cleanup = kgdb_nmi_tty_cleanup, 321 .hangup = kgdb_nmi_tty_hangup, 322 .write_room = kgdb_nmi_tty_write_room, 323 .write = kgdb_nmi_tty_write, 324 }; 325 326 int kgdb_register_nmi_console(void) 327 { 328 int ret; 329 330 if (!arch_kgdb_ops.enable_nmi) 331 return 0; 332 333 kgdb_nmi_tty_driver = alloc_tty_driver(1); 334 if (!kgdb_nmi_tty_driver) { 335 pr_err("%s: cannot allocate tty\n", __func__); 336 return -ENOMEM; 337 } 338 kgdb_nmi_tty_driver->driver_name = "ttyNMI"; 339 kgdb_nmi_tty_driver->name = "ttyNMI"; 340 kgdb_nmi_tty_driver->num = 1; 341 kgdb_nmi_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; 342 kgdb_nmi_tty_driver->subtype = SERIAL_TYPE_NORMAL; 343 kgdb_nmi_tty_driver->flags = TTY_DRIVER_REAL_RAW; 344 kgdb_nmi_tty_driver->init_termios = tty_std_termios; 345 tty_termios_encode_baud_rate(&kgdb_nmi_tty_driver->init_termios, 346 KGDB_NMI_BAUD, KGDB_NMI_BAUD); 347 tty_set_operations(kgdb_nmi_tty_driver, &kgdb_nmi_tty_ops); 348 349 ret = tty_register_driver(kgdb_nmi_tty_driver); 350 if (ret) { 351 pr_err("%s: can't register tty driver: %d\n", __func__, ret); 352 goto err_drv_reg; 353 } 354 355 register_console(&kgdb_nmi_console); 356 357 return 0; 358 err_drv_reg: 359 put_tty_driver(kgdb_nmi_tty_driver); 360 return ret; 361 } 362 EXPORT_SYMBOL_GPL(kgdb_register_nmi_console); 363 364 int kgdb_unregister_nmi_console(void) 365 { 366 int ret; 367 368 if (!arch_kgdb_ops.enable_nmi) 369 return 0; 370 arch_kgdb_ops.enable_nmi(0); 371 372 ret = unregister_console(&kgdb_nmi_console); 373 if (ret) 374 return ret; 375 376 ret = tty_unregister_driver(kgdb_nmi_tty_driver); 377 if (ret) 378 return ret; 379 put_tty_driver(kgdb_nmi_tty_driver); 380 381 return 0; 382 } 383 EXPORT_SYMBOL_GPL(kgdb_unregister_nmi_console); 384