1 /* 2 * Copyright 2003 Digi International (www.digi.com) 3 * Scott H Kilau <Scott_Kilau at digi dot com> 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License as published by 7 * the Free Software Foundation; either version 2, or (at your option) 8 * any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the 12 * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR 13 * PURPOSE. See the GNU General Public License for more details. 14 * 15 * NOTE TO LINUX KERNEL HACKERS: DO NOT REFORMAT THIS CODE! 16 * 17 * This is shared code between Digi's CVS archive and the 18 * Linux Kernel sources. 19 * Changing the source just for reformatting needlessly breaks 20 * our CVS diff history. 21 * 22 * Send any bug fixes/changes to: Eng.Linux at digi dot com. 23 * Thank you. 24 * 25 */ 26 27 #include <linux/delay.h> /* For udelay */ 28 #include <linux/io.h> /* For read[bwl]/write[bwl] */ 29 #include <linux/serial.h> /* For struct async_serial */ 30 #include <linux/serial_reg.h> /* For the various UART offsets */ 31 #include <linux/pci.h> 32 #include <linux/tty.h> 33 34 #include "jsm.h" /* Driver main header file */ 35 36 static struct { 37 unsigned int rate; 38 unsigned int cflag; 39 } baud_rates[] = { 40 { 921600, B921600 }, 41 { 460800, B460800 }, 42 { 230400, B230400 }, 43 { 115200, B115200 }, 44 { 57600, B57600 }, 45 { 38400, B38400 }, 46 { 19200, B19200 }, 47 { 9600, B9600 }, 48 { 4800, B4800 }, 49 { 2400, B2400 }, 50 { 1200, B1200 }, 51 { 600, B600 }, 52 { 300, B300 }, 53 { 200, B200 }, 54 { 150, B150 }, 55 { 134, B134 }, 56 { 110, B110 }, 57 { 75, B75 }, 58 { 50, B50 }, 59 }; 60 61 static void cls_set_cts_flow_control(struct jsm_channel *ch) 62 { 63 u8 lcrb = readb(&ch->ch_cls_uart->lcr); 64 u8 ier = readb(&ch->ch_cls_uart->ier); 65 u8 isr_fcr = 0; 66 67 /* 68 * The Enhanced Register Set may only be accessed when 69 * the Line Control Register is set to 0xBFh. 70 */ 71 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr); 72 73 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr); 74 75 /* Turn on CTS flow control, turn off IXON flow control */ 76 isr_fcr |= (UART_EXAR654_EFR_ECB | UART_EXAR654_EFR_CTSDSR); 77 isr_fcr &= ~(UART_EXAR654_EFR_IXON); 78 79 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr); 80 81 /* Write old LCR value back out, which turns enhanced access off */ 82 writeb(lcrb, &ch->ch_cls_uart->lcr); 83 84 /* 85 * Enable interrupts for CTS flow, turn off interrupts for 86 * received XOFF chars 87 */ 88 ier |= (UART_EXAR654_IER_CTSDSR); 89 ier &= ~(UART_EXAR654_IER_XOFF); 90 writeb(ier, &ch->ch_cls_uart->ier); 91 92 /* Set the usual FIFO values */ 93 writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr); 94 95 writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_56 | 96 UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR), 97 &ch->ch_cls_uart->isr_fcr); 98 99 ch->ch_t_tlevel = 16; 100 } 101 102 static void cls_set_ixon_flow_control(struct jsm_channel *ch) 103 { 104 u8 lcrb = readb(&ch->ch_cls_uart->lcr); 105 u8 ier = readb(&ch->ch_cls_uart->ier); 106 u8 isr_fcr = 0; 107 108 /* 109 * The Enhanced Register Set may only be accessed when 110 * the Line Control Register is set to 0xBFh. 111 */ 112 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr); 113 114 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr); 115 116 /* Turn on IXON flow control, turn off CTS flow control */ 117 isr_fcr |= (UART_EXAR654_EFR_ECB | UART_EXAR654_EFR_IXON); 118 isr_fcr &= ~(UART_EXAR654_EFR_CTSDSR); 119 120 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr); 121 122 /* Now set our current start/stop chars while in enhanced mode */ 123 writeb(ch->ch_startc, &ch->ch_cls_uart->mcr); 124 writeb(0, &ch->ch_cls_uart->lsr); 125 writeb(ch->ch_stopc, &ch->ch_cls_uart->msr); 126 writeb(0, &ch->ch_cls_uart->spr); 127 128 /* Write old LCR value back out, which turns enhanced access off */ 129 writeb(lcrb, &ch->ch_cls_uart->lcr); 130 131 /* 132 * Disable interrupts for CTS flow, turn on interrupts for 133 * received XOFF chars 134 */ 135 ier &= ~(UART_EXAR654_IER_CTSDSR); 136 ier |= (UART_EXAR654_IER_XOFF); 137 writeb(ier, &ch->ch_cls_uart->ier); 138 139 /* Set the usual FIFO values */ 140 writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr); 141 142 writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_16 | 143 UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR), 144 &ch->ch_cls_uart->isr_fcr); 145 } 146 147 static void cls_set_no_output_flow_control(struct jsm_channel *ch) 148 { 149 u8 lcrb = readb(&ch->ch_cls_uart->lcr); 150 u8 ier = readb(&ch->ch_cls_uart->ier); 151 u8 isr_fcr = 0; 152 153 /* 154 * The Enhanced Register Set may only be accessed when 155 * the Line Control Register is set to 0xBFh. 156 */ 157 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr); 158 159 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr); 160 161 /* Turn off IXON flow control, turn off CTS flow control */ 162 isr_fcr |= (UART_EXAR654_EFR_ECB); 163 isr_fcr &= ~(UART_EXAR654_EFR_CTSDSR | UART_EXAR654_EFR_IXON); 164 165 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr); 166 167 /* Write old LCR value back out, which turns enhanced access off */ 168 writeb(lcrb, &ch->ch_cls_uart->lcr); 169 170 /* 171 * Disable interrupts for CTS flow, turn off interrupts for 172 * received XOFF chars 173 */ 174 ier &= ~(UART_EXAR654_IER_CTSDSR); 175 ier &= ~(UART_EXAR654_IER_XOFF); 176 writeb(ier, &ch->ch_cls_uart->ier); 177 178 /* Set the usual FIFO values */ 179 writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr); 180 181 writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_16 | 182 UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR), 183 &ch->ch_cls_uart->isr_fcr); 184 185 ch->ch_r_watermark = 0; 186 ch->ch_t_tlevel = 16; 187 ch->ch_r_tlevel = 16; 188 } 189 190 static void cls_set_rts_flow_control(struct jsm_channel *ch) 191 { 192 u8 lcrb = readb(&ch->ch_cls_uart->lcr); 193 u8 ier = readb(&ch->ch_cls_uart->ier); 194 u8 isr_fcr = 0; 195 196 /* 197 * The Enhanced Register Set may only be accessed when 198 * the Line Control Register is set to 0xBFh. 199 */ 200 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr); 201 202 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr); 203 204 /* Turn on RTS flow control, turn off IXOFF flow control */ 205 isr_fcr |= (UART_EXAR654_EFR_ECB | UART_EXAR654_EFR_RTSDTR); 206 isr_fcr &= ~(UART_EXAR654_EFR_IXOFF); 207 208 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr); 209 210 /* Write old LCR value back out, which turns enhanced access off */ 211 writeb(lcrb, &ch->ch_cls_uart->lcr); 212 213 /* Enable interrupts for RTS flow */ 214 ier |= (UART_EXAR654_IER_RTSDTR); 215 writeb(ier, &ch->ch_cls_uart->ier); 216 217 /* Set the usual FIFO values */ 218 writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr); 219 220 writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_56 | 221 UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR), 222 &ch->ch_cls_uart->isr_fcr); 223 224 ch->ch_r_watermark = 4; 225 ch->ch_r_tlevel = 8; 226 } 227 228 static void cls_set_ixoff_flow_control(struct jsm_channel *ch) 229 { 230 u8 lcrb = readb(&ch->ch_cls_uart->lcr); 231 u8 ier = readb(&ch->ch_cls_uart->ier); 232 u8 isr_fcr = 0; 233 234 /* 235 * The Enhanced Register Set may only be accessed when 236 * the Line Control Register is set to 0xBFh. 237 */ 238 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr); 239 240 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr); 241 242 /* Turn on IXOFF flow control, turn off RTS flow control */ 243 isr_fcr |= (UART_EXAR654_EFR_ECB | UART_EXAR654_EFR_IXOFF); 244 isr_fcr &= ~(UART_EXAR654_EFR_RTSDTR); 245 246 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr); 247 248 /* Now set our current start/stop chars while in enhanced mode */ 249 writeb(ch->ch_startc, &ch->ch_cls_uart->mcr); 250 writeb(0, &ch->ch_cls_uart->lsr); 251 writeb(ch->ch_stopc, &ch->ch_cls_uart->msr); 252 writeb(0, &ch->ch_cls_uart->spr); 253 254 /* Write old LCR value back out, which turns enhanced access off */ 255 writeb(lcrb, &ch->ch_cls_uart->lcr); 256 257 /* Disable interrupts for RTS flow */ 258 ier &= ~(UART_EXAR654_IER_RTSDTR); 259 writeb(ier, &ch->ch_cls_uart->ier); 260 261 /* Set the usual FIFO values */ 262 writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr); 263 264 writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_16 | 265 UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR), 266 &ch->ch_cls_uart->isr_fcr); 267 } 268 269 static void cls_set_no_input_flow_control(struct jsm_channel *ch) 270 { 271 u8 lcrb = readb(&ch->ch_cls_uart->lcr); 272 u8 ier = readb(&ch->ch_cls_uart->ier); 273 u8 isr_fcr = 0; 274 275 /* 276 * The Enhanced Register Set may only be accessed when 277 * the Line Control Register is set to 0xBFh. 278 */ 279 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr); 280 281 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr); 282 283 /* Turn off IXOFF flow control, turn off RTS flow control */ 284 isr_fcr |= (UART_EXAR654_EFR_ECB); 285 isr_fcr &= ~(UART_EXAR654_EFR_RTSDTR | UART_EXAR654_EFR_IXOFF); 286 287 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr); 288 289 /* Write old LCR value back out, which turns enhanced access off */ 290 writeb(lcrb, &ch->ch_cls_uart->lcr); 291 292 /* Disable interrupts for RTS flow */ 293 ier &= ~(UART_EXAR654_IER_RTSDTR); 294 writeb(ier, &ch->ch_cls_uart->ier); 295 296 /* Set the usual FIFO values */ 297 writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr); 298 299 writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_16 | 300 UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR), 301 &ch->ch_cls_uart->isr_fcr); 302 303 ch->ch_t_tlevel = 16; 304 ch->ch_r_tlevel = 16; 305 } 306 307 /* 308 * cls_clear_break. 309 * Determines whether its time to shut off break condition. 310 * 311 * No locks are assumed to be held when calling this function. 312 * channel lock is held and released in this function. 313 */ 314 static void cls_clear_break(struct jsm_channel *ch) 315 { 316 unsigned long lock_flags; 317 318 spin_lock_irqsave(&ch->ch_lock, lock_flags); 319 320 /* Turn break off, and unset some variables */ 321 if (ch->ch_flags & CH_BREAK_SENDING) { 322 u8 temp = readb(&ch->ch_cls_uart->lcr); 323 324 writeb((temp & ~UART_LCR_SBC), &ch->ch_cls_uart->lcr); 325 326 ch->ch_flags &= ~(CH_BREAK_SENDING); 327 jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, 328 "clear break Finishing UART_LCR_SBC! finished: %lx\n", 329 jiffies); 330 } 331 spin_unlock_irqrestore(&ch->ch_lock, lock_flags); 332 } 333 334 static void cls_disable_receiver(struct jsm_channel *ch) 335 { 336 u8 tmp = readb(&ch->ch_cls_uart->ier); 337 338 tmp &= ~(UART_IER_RDI); 339 writeb(tmp, &ch->ch_cls_uart->ier); 340 } 341 342 static void cls_enable_receiver(struct jsm_channel *ch) 343 { 344 u8 tmp = readb(&ch->ch_cls_uart->ier); 345 346 tmp |= (UART_IER_RDI); 347 writeb(tmp, &ch->ch_cls_uart->ier); 348 } 349 350 /* Make the UART raise any of the output signals we want up */ 351 static void cls_assert_modem_signals(struct jsm_channel *ch) 352 { 353 if (!ch) 354 return; 355 356 writeb(ch->ch_mostat, &ch->ch_cls_uart->mcr); 357 } 358 359 static void cls_copy_data_from_uart_to_queue(struct jsm_channel *ch) 360 { 361 int qleft = 0; 362 u8 linestatus = 0; 363 u8 error_mask = 0; 364 u16 head; 365 u16 tail; 366 unsigned long flags; 367 368 if (!ch) 369 return; 370 371 spin_lock_irqsave(&ch->ch_lock, flags); 372 373 /* cache head and tail of queue */ 374 head = ch->ch_r_head & RQUEUEMASK; 375 tail = ch->ch_r_tail & RQUEUEMASK; 376 377 /* Get our cached LSR */ 378 linestatus = ch->ch_cached_lsr; 379 ch->ch_cached_lsr = 0; 380 381 /* Store how much space we have left in the queue */ 382 qleft = tail - head - 1; 383 if (qleft < 0) 384 qleft += RQUEUEMASK + 1; 385 386 /* 387 * Create a mask to determine whether we should 388 * insert the character (if any) into our queue. 389 */ 390 if (ch->ch_c_iflag & IGNBRK) 391 error_mask |= UART_LSR_BI; 392 393 while (1) { 394 /* 395 * Grab the linestatus register, we need to 396 * check to see if there is any data to read 397 */ 398 linestatus = readb(&ch->ch_cls_uart->lsr); 399 400 /* Break out if there is no data to fetch */ 401 if (!(linestatus & UART_LSR_DR)) 402 break; 403 404 /* 405 * Discard character if we are ignoring the error mask 406 * which in this case is the break signal. 407 */ 408 if (linestatus & error_mask) { 409 u8 discard; 410 411 linestatus = 0; 412 discard = readb(&ch->ch_cls_uart->txrx); 413 continue; 414 } 415 416 /* 417 * If our queue is full, we have no choice but to drop some 418 * data. The assumption is that HWFLOW or SWFLOW should have 419 * stopped things way way before we got to this point. 420 * 421 * I decided that I wanted to ditch the oldest data first, 422 * I hope thats okay with everyone? Yes? Good. 423 */ 424 while (qleft < 1) { 425 tail = (tail + 1) & RQUEUEMASK; 426 ch->ch_r_tail = tail; 427 ch->ch_err_overrun++; 428 qleft++; 429 } 430 431 ch->ch_equeue[head] = linestatus & (UART_LSR_BI | UART_LSR_PE 432 | UART_LSR_FE); 433 ch->ch_rqueue[head] = readb(&ch->ch_cls_uart->txrx); 434 435 qleft--; 436 437 if (ch->ch_equeue[head] & UART_LSR_PE) 438 ch->ch_err_parity++; 439 if (ch->ch_equeue[head] & UART_LSR_BI) 440 ch->ch_err_break++; 441 if (ch->ch_equeue[head] & UART_LSR_FE) 442 ch->ch_err_frame++; 443 444 /* Add to, and flip head if needed */ 445 head = (head + 1) & RQUEUEMASK; 446 ch->ch_rxcount++; 447 } 448 449 /* 450 * Write new final heads to channel structure. 451 */ 452 ch->ch_r_head = head & RQUEUEMASK; 453 ch->ch_e_head = head & EQUEUEMASK; 454 455 spin_unlock_irqrestore(&ch->ch_lock, flags); 456 } 457 458 static void cls_copy_data_from_queue_to_uart(struct jsm_channel *ch) 459 { 460 u16 tail; 461 int n; 462 int qlen; 463 u32 len_written = 0; 464 struct circ_buf *circ; 465 466 if (!ch) 467 return; 468 469 circ = &ch->uart_port.state->xmit; 470 471 /* No data to write to the UART */ 472 if (uart_circ_empty(circ)) 473 return; 474 475 /* If port is "stopped", don't send any data to the UART */ 476 if ((ch->ch_flags & CH_STOP) || (ch->ch_flags & CH_BREAK_SENDING)) 477 return; 478 479 /* We have to do it this way, because of the EXAR TXFIFO count bug. */ 480 if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM))) 481 return; 482 483 n = 32; 484 485 /* cache tail of queue */ 486 tail = circ->tail & (UART_XMIT_SIZE - 1); 487 qlen = uart_circ_chars_pending(circ); 488 489 /* Find minimum of the FIFO space, versus queue length */ 490 n = min(n, qlen); 491 492 while (n > 0) { 493 writeb(circ->buf[tail], &ch->ch_cls_uart->txrx); 494 tail = (tail + 1) & (UART_XMIT_SIZE - 1); 495 n--; 496 ch->ch_txcount++; 497 len_written++; 498 } 499 500 /* Update the final tail */ 501 circ->tail = tail & (UART_XMIT_SIZE - 1); 502 503 if (len_written > ch->ch_t_tlevel) 504 ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); 505 506 if (uart_circ_empty(circ)) 507 uart_write_wakeup(&ch->uart_port); 508 } 509 510 static void cls_parse_modem(struct jsm_channel *ch, u8 signals) 511 { 512 u8 msignals = signals; 513 514 jsm_dbg(MSIGS, &ch->ch_bd->pci_dev, 515 "neo_parse_modem: port: %d msignals: %x\n", 516 ch->ch_portnum, msignals); 517 518 /* 519 * Scrub off lower bits. 520 * They signify delta's, which I don't care about 521 * Keep DDCD and DDSR though 522 */ 523 msignals &= 0xf8; 524 525 if (msignals & UART_MSR_DDCD) 526 uart_handle_dcd_change(&ch->uart_port, msignals & UART_MSR_DCD); 527 if (msignals & UART_MSR_DDSR) 528 uart_handle_dcd_change(&ch->uart_port, msignals & UART_MSR_CTS); 529 530 if (msignals & UART_MSR_DCD) 531 ch->ch_mistat |= UART_MSR_DCD; 532 else 533 ch->ch_mistat &= ~UART_MSR_DCD; 534 535 if (msignals & UART_MSR_DSR) 536 ch->ch_mistat |= UART_MSR_DSR; 537 else 538 ch->ch_mistat &= ~UART_MSR_DSR; 539 540 if (msignals & UART_MSR_RI) 541 ch->ch_mistat |= UART_MSR_RI; 542 else 543 ch->ch_mistat &= ~UART_MSR_RI; 544 545 if (msignals & UART_MSR_CTS) 546 ch->ch_mistat |= UART_MSR_CTS; 547 else 548 ch->ch_mistat &= ~UART_MSR_CTS; 549 550 jsm_dbg(MSIGS, &ch->ch_bd->pci_dev, 551 "Port: %d DTR: %d RTS: %d CTS: %d DSR: %d " "RI: %d CD: %d\n", 552 ch->ch_portnum, 553 !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_DTR), 554 !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_RTS), 555 !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_CTS), 556 !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DSR), 557 !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_RI), 558 !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DCD)); 559 } 560 561 /* Parse the ISR register for the specific port */ 562 static inline void cls_parse_isr(struct jsm_board *brd, uint port) 563 { 564 struct jsm_channel *ch; 565 u8 isr = 0; 566 unsigned long flags; 567 568 /* 569 * No need to verify board pointer, it was already 570 * verified in the interrupt routine. 571 */ 572 573 if (port >= brd->nasync) 574 return; 575 576 ch = brd->channels[port]; 577 if (!ch) 578 return; 579 580 /* Here we try to figure out what caused the interrupt to happen */ 581 while (1) { 582 isr = readb(&ch->ch_cls_uart->isr_fcr); 583 584 /* Bail if no pending interrupt on port */ 585 if (isr & UART_IIR_NO_INT) 586 break; 587 588 /* Receive Interrupt pending */ 589 if (isr & (UART_IIR_RDI | UART_IIR_RDI_TIMEOUT)) { 590 /* Read data from uart -> queue */ 591 cls_copy_data_from_uart_to_queue(ch); 592 jsm_check_queue_flow_control(ch); 593 } 594 595 /* Transmit Hold register empty pending */ 596 if (isr & UART_IIR_THRI) { 597 /* Transfer data (if any) from Write Queue -> UART. */ 598 spin_lock_irqsave(&ch->ch_lock, flags); 599 ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); 600 spin_unlock_irqrestore(&ch->ch_lock, flags); 601 cls_copy_data_from_queue_to_uart(ch); 602 } 603 604 /* 605 * CTS/RTS change of state: 606 * Don't need to do anything, the cls_parse_modem 607 * below will grab the updated modem signals. 608 */ 609 610 /* Parse any modem signal changes */ 611 cls_parse_modem(ch, readb(&ch->ch_cls_uart->msr)); 612 } 613 } 614 615 /* Channel lock MUST be held before calling this function! */ 616 static void cls_flush_uart_write(struct jsm_channel *ch) 617 { 618 u8 tmp = 0; 619 u8 i = 0; 620 621 if (!ch) 622 return; 623 624 writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT), 625 &ch->ch_cls_uart->isr_fcr); 626 627 for (i = 0; i < 10; i++) { 628 /* Check to see if the UART feels it completely flushed FIFO */ 629 tmp = readb(&ch->ch_cls_uart->isr_fcr); 630 if (tmp & UART_FCR_CLEAR_XMIT) { 631 jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, 632 "Still flushing TX UART... i: %d\n", i); 633 udelay(10); 634 } else 635 break; 636 } 637 638 ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); 639 } 640 641 /* Channel lock MUST be held before calling this function! */ 642 static void cls_flush_uart_read(struct jsm_channel *ch) 643 { 644 if (!ch) 645 return; 646 647 /* 648 * For complete POSIX compatibility, we should be purging the 649 * read FIFO in the UART here. 650 * 651 * However, clearing the read FIFO (UART_FCR_CLEAR_RCVR) also 652 * incorrectly flushes write data as well as just basically trashing the 653 * FIFO. 654 * 655 * Presumably, this is a bug in this UART. 656 */ 657 658 udelay(10); 659 } 660 661 static void cls_send_start_character(struct jsm_channel *ch) 662 { 663 if (!ch) 664 return; 665 666 if (ch->ch_startc != __DISABLED_CHAR) { 667 ch->ch_xon_sends++; 668 writeb(ch->ch_startc, &ch->ch_cls_uart->txrx); 669 } 670 } 671 672 static void cls_send_stop_character(struct jsm_channel *ch) 673 { 674 if (!ch) 675 return; 676 677 if (ch->ch_stopc != __DISABLED_CHAR) { 678 ch->ch_xoff_sends++; 679 writeb(ch->ch_stopc, &ch->ch_cls_uart->txrx); 680 } 681 } 682 683 /* 684 * cls_param() 685 * Send any/all changes to the line to the UART. 686 */ 687 static void cls_param(struct jsm_channel *ch) 688 { 689 u8 lcr = 0; 690 u8 uart_lcr = 0; 691 u8 ier = 0; 692 u32 baud = 9600; 693 int quot = 0; 694 struct jsm_board *bd; 695 int i; 696 unsigned int cflag; 697 698 bd = ch->ch_bd; 699 if (!bd) 700 return; 701 702 /* 703 * If baud rate is zero, flush queues, and set mval to drop DTR. 704 */ 705 if ((ch->ch_c_cflag & (CBAUD)) == 0) { 706 ch->ch_r_head = 0; 707 ch->ch_r_tail = 0; 708 ch->ch_e_head = 0; 709 ch->ch_e_tail = 0; 710 711 cls_flush_uart_write(ch); 712 cls_flush_uart_read(ch); 713 714 /* The baudrate is B0 so all modem lines are to be dropped. */ 715 ch->ch_flags |= (CH_BAUD0); 716 ch->ch_mostat &= ~(UART_MCR_RTS | UART_MCR_DTR); 717 cls_assert_modem_signals(ch); 718 return; 719 } 720 721 cflag = C_BAUD(ch->uart_port.state->port.tty); 722 baud = 9600; 723 for (i = 0; i < ARRAY_SIZE(baud_rates); i++) { 724 if (baud_rates[i].cflag == cflag) { 725 baud = baud_rates[i].rate; 726 break; 727 } 728 } 729 730 if (ch->ch_flags & CH_BAUD0) 731 ch->ch_flags &= ~(CH_BAUD0); 732 733 if (ch->ch_c_cflag & PARENB) 734 lcr |= UART_LCR_PARITY; 735 736 if (!(ch->ch_c_cflag & PARODD)) 737 lcr |= UART_LCR_EPAR; 738 739 /* 740 * Not all platforms support mark/space parity, 741 * so this will hide behind an ifdef. 742 */ 743 #ifdef CMSPAR 744 if (ch->ch_c_cflag & CMSPAR) 745 lcr |= UART_LCR_SPAR; 746 #endif 747 748 if (ch->ch_c_cflag & CSTOPB) 749 lcr |= UART_LCR_STOP; 750 751 switch (ch->ch_c_cflag & CSIZE) { 752 case CS5: 753 lcr |= UART_LCR_WLEN5; 754 break; 755 case CS6: 756 lcr |= UART_LCR_WLEN6; 757 break; 758 case CS7: 759 lcr |= UART_LCR_WLEN7; 760 break; 761 case CS8: 762 default: 763 lcr |= UART_LCR_WLEN8; 764 break; 765 } 766 767 ier = readb(&ch->ch_cls_uart->ier); 768 uart_lcr = readb(&ch->ch_cls_uart->lcr); 769 770 quot = ch->ch_bd->bd_dividend / baud; 771 772 if (quot != 0) { 773 writeb(UART_LCR_DLAB, &ch->ch_cls_uart->lcr); 774 writeb((quot & 0xff), &ch->ch_cls_uart->txrx); 775 writeb((quot >> 8), &ch->ch_cls_uart->ier); 776 writeb(lcr, &ch->ch_cls_uart->lcr); 777 } 778 779 if (uart_lcr != lcr) 780 writeb(lcr, &ch->ch_cls_uart->lcr); 781 782 if (ch->ch_c_cflag & CREAD) 783 ier |= (UART_IER_RDI | UART_IER_RLSI); 784 785 ier |= (UART_IER_THRI | UART_IER_MSI); 786 787 writeb(ier, &ch->ch_cls_uart->ier); 788 789 if (ch->ch_c_cflag & CRTSCTS) 790 cls_set_cts_flow_control(ch); 791 else if (ch->ch_c_iflag & IXON) { 792 /* 793 * If start/stop is set to disable, 794 * then we should disable flow control. 795 */ 796 if ((ch->ch_startc == __DISABLED_CHAR) || 797 (ch->ch_stopc == __DISABLED_CHAR)) 798 cls_set_no_output_flow_control(ch); 799 else 800 cls_set_ixon_flow_control(ch); 801 } else 802 cls_set_no_output_flow_control(ch); 803 804 if (ch->ch_c_cflag & CRTSCTS) 805 cls_set_rts_flow_control(ch); 806 else if (ch->ch_c_iflag & IXOFF) { 807 /* 808 * If start/stop is set to disable, 809 * then we should disable flow control. 810 */ 811 if ((ch->ch_startc == __DISABLED_CHAR) || 812 (ch->ch_stopc == __DISABLED_CHAR)) 813 cls_set_no_input_flow_control(ch); 814 else 815 cls_set_ixoff_flow_control(ch); 816 } else 817 cls_set_no_input_flow_control(ch); 818 819 cls_assert_modem_signals(ch); 820 821 /* get current status of the modem signals now */ 822 cls_parse_modem(ch, readb(&ch->ch_cls_uart->msr)); 823 } 824 825 /* 826 * cls_intr() 827 * 828 * Classic specific interrupt handler. 829 */ 830 static irqreturn_t cls_intr(int irq, void *voidbrd) 831 { 832 struct jsm_board *brd = voidbrd; 833 unsigned long lock_flags; 834 unsigned char uart_poll; 835 uint i = 0; 836 837 /* Lock out the slow poller from running on this board. */ 838 spin_lock_irqsave(&brd->bd_intr_lock, lock_flags); 839 840 /* 841 * Check the board's global interrupt offset to see if we 842 * acctually do have an interrupt pending on us. 843 */ 844 uart_poll = readb(brd->re_map_membase + UART_CLASSIC_POLL_ADDR_OFFSET); 845 846 jsm_dbg(INTR, &brd->pci_dev, "%s:%d uart_poll: %x\n", 847 __FILE__, __LINE__, uart_poll); 848 849 if (!uart_poll) { 850 jsm_dbg(INTR, &brd->pci_dev, 851 "Kernel interrupted to me, but no pending interrupts...\n"); 852 spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags); 853 return IRQ_NONE; 854 } 855 856 /* At this point, we have at least SOMETHING to service, dig further. */ 857 858 /* Parse each port to find out what caused the interrupt */ 859 for (i = 0; i < brd->nasync; i++) 860 cls_parse_isr(brd, i); 861 862 spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags); 863 864 return IRQ_HANDLED; 865 } 866 867 /* Inits UART */ 868 static void cls_uart_init(struct jsm_channel *ch) 869 { 870 unsigned char lcrb = readb(&ch->ch_cls_uart->lcr); 871 unsigned char isr_fcr = 0; 872 873 writeb(0, &ch->ch_cls_uart->ier); 874 875 /* 876 * The Enhanced Register Set may only be accessed when 877 * the Line Control Register is set to 0xBFh. 878 */ 879 writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr); 880 881 isr_fcr = readb(&ch->ch_cls_uart->isr_fcr); 882 883 /* Turn on Enhanced/Extended controls */ 884 isr_fcr |= (UART_EXAR654_EFR_ECB); 885 886 writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr); 887 888 /* Write old LCR value back out, which turns enhanced access off */ 889 writeb(lcrb, &ch->ch_cls_uart->lcr); 890 891 /* Clear out UART and FIFO */ 892 readb(&ch->ch_cls_uart->txrx); 893 894 writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT), 895 &ch->ch_cls_uart->isr_fcr); 896 udelay(10); 897 898 ch->ch_flags |= (CH_FIFO_ENABLED | CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); 899 900 readb(&ch->ch_cls_uart->lsr); 901 readb(&ch->ch_cls_uart->msr); 902 } 903 904 /* 905 * Turns off UART. 906 */ 907 static void cls_uart_off(struct jsm_channel *ch) 908 { 909 /* Stop all interrupts from accurring. */ 910 writeb(0, &ch->ch_cls_uart->ier); 911 } 912 913 /* 914 * cls_get_uarts_bytes_left. 915 * Returns 0 is nothing left in the FIFO, returns 1 otherwise. 916 * 917 * The channel lock MUST be held by the calling function. 918 */ 919 static u32 cls_get_uart_bytes_left(struct jsm_channel *ch) 920 { 921 u8 left = 0; 922 u8 lsr = readb(&ch->ch_cls_uart->lsr); 923 924 /* Determine whether the Transmitter is empty or not */ 925 if (!(lsr & UART_LSR_TEMT)) 926 left = 1; 927 else { 928 ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); 929 left = 0; 930 } 931 932 return left; 933 } 934 935 /* 936 * cls_send_break. 937 * Starts sending a break thru the UART. 938 * 939 * The channel lock MUST be held by the calling function. 940 */ 941 static void cls_send_break(struct jsm_channel *ch) 942 { 943 /* Tell the UART to start sending the break */ 944 if (!(ch->ch_flags & CH_BREAK_SENDING)) { 945 u8 temp = readb(&ch->ch_cls_uart->lcr); 946 947 writeb((temp | UART_LCR_SBC), &ch->ch_cls_uart->lcr); 948 ch->ch_flags |= (CH_BREAK_SENDING); 949 } 950 } 951 952 /* 953 * cls_send_immediate_char. 954 * Sends a specific character as soon as possible to the UART, 955 * jumping over any bytes that might be in the write queue. 956 * 957 * The channel lock MUST be held by the calling function. 958 */ 959 static void cls_send_immediate_char(struct jsm_channel *ch, unsigned char c) 960 { 961 writeb(c, &ch->ch_cls_uart->txrx); 962 } 963 964 struct board_ops jsm_cls_ops = { 965 .intr = cls_intr, 966 .uart_init = cls_uart_init, 967 .uart_off = cls_uart_off, 968 .param = cls_param, 969 .assert_modem_signals = cls_assert_modem_signals, 970 .flush_uart_write = cls_flush_uart_write, 971 .flush_uart_read = cls_flush_uart_read, 972 .disable_receiver = cls_disable_receiver, 973 .enable_receiver = cls_enable_receiver, 974 .send_break = cls_send_break, 975 .clear_break = cls_clear_break, 976 .send_start_character = cls_send_start_character, 977 .send_stop_character = cls_send_stop_character, 978 .copy_data_from_queue_to_uart = cls_copy_data_from_queue_to_uart, 979 .get_uart_bytes_left = cls_get_uart_bytes_left, 980 .send_immediate_char = cls_send_immediate_char 981 }; 982 983