1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * icom.c 4 * 5 * Copyright (C) 2001 IBM Corporation. All rights reserved. 6 * 7 * Serial device driver. 8 * 9 * Based on code from serial.c 10 */ 11 #include <linux/module.h> 12 #include <linux/kernel.h> 13 #include <linux/errno.h> 14 #include <linux/signal.h> 15 #include <linux/timer.h> 16 #include <linux/interrupt.h> 17 #include <linux/tty.h> 18 #include <linux/termios.h> 19 #include <linux/fs.h> 20 #include <linux/tty_flip.h> 21 #include <linux/serial.h> 22 #include <linux/serial_reg.h> 23 #include <linux/major.h> 24 #include <linux/string.h> 25 #include <linux/fcntl.h> 26 #include <linux/ptrace.h> 27 #include <linux/ioport.h> 28 #include <linux/mm.h> 29 #include <linux/slab.h> 30 #include <linux/init.h> 31 #include <linux/delay.h> 32 #include <linux/pci.h> 33 #include <linux/vmalloc.h> 34 #include <linux/smp.h> 35 #include <linux/spinlock.h> 36 #include <linux/kref.h> 37 #include <linux/firmware.h> 38 #include <linux/bitops.h> 39 40 #include <linux/io.h> 41 #include <asm/irq.h> 42 #include <linux/uaccess.h> 43 44 #include "icom.h" 45 46 /*#define ICOM_TRACE enable port trace capabilities */ 47 48 #define ICOM_DRIVER_NAME "icom" 49 #define ICOM_VERSION_STR "1.3.1" 50 #define NR_PORTS 128 51 #define ICOM_PORT ((struct icom_port *)port) 52 #define to_icom_adapter(d) container_of(d, struct icom_adapter, kref) 53 54 static const struct pci_device_id icom_pci_table[] = { 55 { 56 .vendor = PCI_VENDOR_ID_IBM, 57 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1, 58 .subvendor = PCI_ANY_ID, 59 .subdevice = PCI_ANY_ID, 60 .driver_data = ADAPTER_V1, 61 }, 62 { 63 .vendor = PCI_VENDOR_ID_IBM, 64 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 65 .subvendor = PCI_VENDOR_ID_IBM, 66 .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX, 67 .driver_data = ADAPTER_V2, 68 }, 69 { 70 .vendor = PCI_VENDOR_ID_IBM, 71 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 72 .subvendor = PCI_VENDOR_ID_IBM, 73 .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM, 74 .driver_data = ADAPTER_V2, 75 }, 76 { 77 .vendor = PCI_VENDOR_ID_IBM, 78 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 79 .subvendor = PCI_VENDOR_ID_IBM, 80 .subdevice = PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL, 81 .driver_data = ADAPTER_V2, 82 }, 83 { 84 .vendor = PCI_VENDOR_ID_IBM, 85 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 86 .subvendor = PCI_VENDOR_ID_IBM, 87 .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE, 88 .driver_data = ADAPTER_V2, 89 }, 90 {} 91 }; 92 93 static struct lookup_proc_table start_proc[4] = { 94 {NULL, ICOM_CONTROL_START_A}, 95 {NULL, ICOM_CONTROL_START_B}, 96 {NULL, ICOM_CONTROL_START_C}, 97 {NULL, ICOM_CONTROL_START_D} 98 }; 99 100 101 static struct lookup_proc_table stop_proc[4] = { 102 {NULL, ICOM_CONTROL_STOP_A}, 103 {NULL, ICOM_CONTROL_STOP_B}, 104 {NULL, ICOM_CONTROL_STOP_C}, 105 {NULL, ICOM_CONTROL_STOP_D} 106 }; 107 108 static struct lookup_int_table int_mask_tbl[4] = { 109 {NULL, ICOM_INT_MASK_PRC_A}, 110 {NULL, ICOM_INT_MASK_PRC_B}, 111 {NULL, ICOM_INT_MASK_PRC_C}, 112 {NULL, ICOM_INT_MASK_PRC_D}, 113 }; 114 115 116 MODULE_DEVICE_TABLE(pci, icom_pci_table); 117 118 static LIST_HEAD(icom_adapter_head); 119 120 /* spinlock for adapter initialization and changing adapter operations */ 121 static DEFINE_SPINLOCK(icom_lock); 122 123 #ifdef ICOM_TRACE 124 static inline void trace(struct icom_port *icom_port, char *trace_pt, 125 unsigned long trace_data) 126 { 127 dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n", 128 icom_port->port, trace_pt, trace_data); 129 } 130 #else 131 static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {}; 132 #endif 133 static void icom_kref_release(struct kref *kref); 134 135 static void free_port_memory(struct icom_port *icom_port) 136 { 137 struct pci_dev *dev = icom_port->adapter->pci_dev; 138 139 trace(icom_port, "RET_PORT_MEM", 0); 140 if (icom_port->recv_buf) { 141 dma_free_coherent(&dev->dev, 4096, icom_port->recv_buf, 142 icom_port->recv_buf_pci); 143 icom_port->recv_buf = NULL; 144 } 145 if (icom_port->xmit_buf) { 146 dma_free_coherent(&dev->dev, 4096, icom_port->xmit_buf, 147 icom_port->xmit_buf_pci); 148 icom_port->xmit_buf = NULL; 149 } 150 if (icom_port->statStg) { 151 dma_free_coherent(&dev->dev, 4096, icom_port->statStg, 152 icom_port->statStg_pci); 153 icom_port->statStg = NULL; 154 } 155 156 if (icom_port->xmitRestart) { 157 dma_free_coherent(&dev->dev, 4096, icom_port->xmitRestart, 158 icom_port->xmitRestart_pci); 159 icom_port->xmitRestart = NULL; 160 } 161 } 162 163 static int get_port_memory(struct icom_port *icom_port) 164 { 165 int index; 166 unsigned long stgAddr; 167 unsigned long startStgAddr; 168 unsigned long offset; 169 struct pci_dev *dev = icom_port->adapter->pci_dev; 170 171 icom_port->xmit_buf = 172 dma_alloc_coherent(&dev->dev, 4096, &icom_port->xmit_buf_pci, 173 GFP_KERNEL); 174 if (!icom_port->xmit_buf) { 175 dev_err(&dev->dev, "Can not allocate Transmit buffer\n"); 176 return -ENOMEM; 177 } 178 179 trace(icom_port, "GET_PORT_MEM", 180 (unsigned long) icom_port->xmit_buf); 181 182 icom_port->recv_buf = 183 dma_alloc_coherent(&dev->dev, 4096, &icom_port->recv_buf_pci, 184 GFP_KERNEL); 185 if (!icom_port->recv_buf) { 186 dev_err(&dev->dev, "Can not allocate Receive buffer\n"); 187 free_port_memory(icom_port); 188 return -ENOMEM; 189 } 190 trace(icom_port, "GET_PORT_MEM", 191 (unsigned long) icom_port->recv_buf); 192 193 icom_port->statStg = 194 dma_alloc_coherent(&dev->dev, 4096, &icom_port->statStg_pci, 195 GFP_KERNEL); 196 if (!icom_port->statStg) { 197 dev_err(&dev->dev, "Can not allocate Status buffer\n"); 198 free_port_memory(icom_port); 199 return -ENOMEM; 200 } 201 trace(icom_port, "GET_PORT_MEM", 202 (unsigned long) icom_port->statStg); 203 204 icom_port->xmitRestart = 205 dma_alloc_coherent(&dev->dev, 4096, &icom_port->xmitRestart_pci, 206 GFP_KERNEL); 207 if (!icom_port->xmitRestart) { 208 dev_err(&dev->dev, 209 "Can not allocate xmit Restart buffer\n"); 210 free_port_memory(icom_port); 211 return -ENOMEM; 212 } 213 214 /* FODs: Frame Out Descriptor Queue, this is a FIFO queue that 215 indicates that frames are to be transmitted 216 */ 217 218 stgAddr = (unsigned long) icom_port->statStg; 219 for (index = 0; index < NUM_XBUFFS; index++) { 220 trace(icom_port, "FOD_ADDR", stgAddr); 221 stgAddr = stgAddr + sizeof(icom_port->statStg->xmit[0]); 222 if (index < (NUM_XBUFFS - 1)) { 223 memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); 224 icom_port->statStg->xmit[index].leLengthASD = 225 (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); 226 trace(icom_port, "FOD_ADDR", stgAddr); 227 trace(icom_port, "FOD_XBUFF", 228 (unsigned long) icom_port->xmit_buf); 229 icom_port->statStg->xmit[index].leBuffer = 230 cpu_to_le32(icom_port->xmit_buf_pci); 231 } else if (index == (NUM_XBUFFS - 1)) { 232 memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); 233 icom_port->statStg->xmit[index].leLengthASD = 234 (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); 235 trace(icom_port, "FOD_XBUFF", 236 (unsigned long) icom_port->xmit_buf); 237 icom_port->statStg->xmit[index].leBuffer = 238 cpu_to_le32(icom_port->xmit_buf_pci); 239 } else { 240 memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); 241 } 242 } 243 /* FIDs */ 244 startStgAddr = stgAddr; 245 246 /* fill in every entry, even if no buffer */ 247 for (index = 0; index < NUM_RBUFFS; index++) { 248 trace(icom_port, "FID_ADDR", stgAddr); 249 stgAddr = stgAddr + sizeof(icom_port->statStg->rcv[0]); 250 icom_port->statStg->rcv[index].leLength = 0; 251 icom_port->statStg->rcv[index].WorkingLength = 252 (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); 253 if (index < (NUM_RBUFFS - 1) ) { 254 offset = stgAddr - (unsigned long) icom_port->statStg; 255 icom_port->statStg->rcv[index].leNext = 256 cpu_to_le32(icom_port-> statStg_pci + offset); 257 trace(icom_port, "FID_RBUFF", 258 (unsigned long) icom_port->recv_buf); 259 icom_port->statStg->rcv[index].leBuffer = 260 cpu_to_le32(icom_port->recv_buf_pci); 261 } else if (index == (NUM_RBUFFS -1) ) { 262 offset = startStgAddr - (unsigned long) icom_port->statStg; 263 icom_port->statStg->rcv[index].leNext = 264 cpu_to_le32(icom_port-> statStg_pci + offset); 265 trace(icom_port, "FID_RBUFF", 266 (unsigned long) icom_port->recv_buf + 2048); 267 icom_port->statStg->rcv[index].leBuffer = 268 cpu_to_le32(icom_port->recv_buf_pci + 2048); 269 } else { 270 icom_port->statStg->rcv[index].leNext = 0; 271 icom_port->statStg->rcv[index].leBuffer = 0; 272 } 273 } 274 275 return 0; 276 } 277 278 static void stop_processor(struct icom_port *icom_port) 279 { 280 unsigned long temp; 281 unsigned long flags; 282 int port; 283 284 spin_lock_irqsave(&icom_lock, flags); 285 286 port = icom_port->port; 287 if (port >= ARRAY_SIZE(stop_proc)) { 288 dev_err(&icom_port->adapter->pci_dev->dev, 289 "Invalid port assignment\n"); 290 goto unlock; 291 } 292 293 if (port == 0 || port == 1) 294 stop_proc[port].global_control_reg = &icom_port->global_reg->control; 295 else 296 stop_proc[port].global_control_reg = &icom_port->global_reg->control_2; 297 298 temp = readl(stop_proc[port].global_control_reg); 299 temp = (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id; 300 writel(temp, stop_proc[port].global_control_reg); 301 302 /* write flush */ 303 readl(stop_proc[port].global_control_reg); 304 305 unlock: 306 spin_unlock_irqrestore(&icom_lock, flags); 307 } 308 309 static void start_processor(struct icom_port *icom_port) 310 { 311 unsigned long temp; 312 unsigned long flags; 313 int port; 314 315 spin_lock_irqsave(&icom_lock, flags); 316 317 port = icom_port->port; 318 if (port >= ARRAY_SIZE(start_proc)) { 319 dev_err(&icom_port->adapter->pci_dev->dev, 320 "Invalid port assignment\n"); 321 goto unlock; 322 } 323 324 if (port == 0 || port == 1) 325 start_proc[port].global_control_reg = &icom_port->global_reg->control; 326 else 327 start_proc[port].global_control_reg = &icom_port->global_reg->control_2; 328 329 temp = readl(start_proc[port].global_control_reg); 330 temp = (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id; 331 writel(temp, start_proc[port].global_control_reg); 332 333 /* write flush */ 334 readl(start_proc[port].global_control_reg); 335 336 unlock: 337 spin_unlock_irqrestore(&icom_lock, flags); 338 } 339 340 static void load_code(struct icom_port *icom_port) 341 { 342 const struct firmware *fw; 343 char __iomem *iram_ptr; 344 int index; 345 int status = 0; 346 void __iomem *dram_ptr = icom_port->dram; 347 dma_addr_t temp_pci; 348 unsigned char *new_page = NULL; 349 unsigned char cable_id = NO_CABLE; 350 struct pci_dev *dev = icom_port->adapter->pci_dev; 351 352 /* Clear out any pending interrupts */ 353 writew(0x3FFF, icom_port->int_reg); 354 355 trace(icom_port, "CLEAR_INTERRUPTS", 0); 356 357 /* Stop processor */ 358 stop_processor(icom_port); 359 360 /* Zero out DRAM */ 361 memset_io(dram_ptr, 0, 512); 362 363 /* Load Call Setup into Adapter */ 364 if (request_firmware(&fw, "icom_call_setup.bin", &dev->dev) < 0) { 365 dev_err(&dev->dev,"Unable to load icom_call_setup.bin firmware image\n"); 366 status = -1; 367 goto load_code_exit; 368 } 369 370 if (fw->size > ICOM_DCE_IRAM_OFFSET) { 371 dev_err(&dev->dev, "Invalid firmware image for icom_call_setup.bin found.\n"); 372 release_firmware(fw); 373 status = -1; 374 goto load_code_exit; 375 } 376 377 iram_ptr = (char __iomem *)icom_port->dram + ICOM_IRAM_OFFSET; 378 for (index = 0; index < fw->size; index++) 379 writeb(fw->data[index], &iram_ptr[index]); 380 381 release_firmware(fw); 382 383 /* Load Resident DCE portion of Adapter */ 384 if (request_firmware(&fw, "icom_res_dce.bin", &dev->dev) < 0) { 385 dev_err(&dev->dev,"Unable to load icom_res_dce.bin firmware image\n"); 386 status = -1; 387 goto load_code_exit; 388 } 389 390 if (fw->size > ICOM_IRAM_SIZE) { 391 dev_err(&dev->dev, "Invalid firmware image for icom_res_dce.bin found.\n"); 392 release_firmware(fw); 393 status = -1; 394 goto load_code_exit; 395 } 396 397 iram_ptr = (char __iomem *) icom_port->dram + ICOM_IRAM_OFFSET; 398 for (index = ICOM_DCE_IRAM_OFFSET; index < fw->size; index++) 399 writeb(fw->data[index], &iram_ptr[index]); 400 401 release_firmware(fw); 402 403 /* Set Hardware level */ 404 if (icom_port->adapter->version == ADAPTER_V2) 405 writeb(V2_HARDWARE, &(icom_port->dram->misc_flags)); 406 407 /* Start the processor in Adapter */ 408 start_processor(icom_port); 409 410 writeb((HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL), 411 &(icom_port->dram->HDLCConfigReg)); 412 writeb(0x04, &(icom_port->dram->FlagFillIdleTimer)); /* 0.5 seconds */ 413 writeb(0x00, &(icom_port->dram->CmdReg)); 414 writeb(0x10, &(icom_port->dram->async_config3)); 415 writeb((ICOM_ACFG_DRIVE1 | ICOM_ACFG_NO_PARITY | ICOM_ACFG_8BPC | 416 ICOM_ACFG_1STOP_BIT), &(icom_port->dram->async_config2)); 417 418 /*Set up data in icom DRAM to indicate where personality 419 *code is located and its length. 420 */ 421 new_page = dma_alloc_coherent(&dev->dev, 4096, &temp_pci, GFP_KERNEL); 422 423 if (!new_page) { 424 dev_err(&dev->dev, "Can not allocate DMA buffer\n"); 425 status = -1; 426 goto load_code_exit; 427 } 428 429 if (request_firmware(&fw, "icom_asc.bin", &dev->dev) < 0) { 430 dev_err(&dev->dev,"Unable to load icom_asc.bin firmware image\n"); 431 status = -1; 432 goto load_code_exit; 433 } 434 435 if (fw->size > ICOM_DCE_IRAM_OFFSET) { 436 dev_err(&dev->dev, "Invalid firmware image for icom_asc.bin found.\n"); 437 release_firmware(fw); 438 status = -1; 439 goto load_code_exit; 440 } 441 442 for (index = 0; index < fw->size; index++) 443 new_page[index] = fw->data[index]; 444 445 writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length); 446 writel(temp_pci, &icom_port->dram->mac_load_addr); 447 448 release_firmware(fw); 449 450 /*Setting the syncReg to 0x80 causes adapter to start downloading 451 the personality code into adapter instruction RAM. 452 Once code is loaded, it will begin executing and, based on 453 information provided above, will start DMAing data from 454 shared memory to adapter DRAM. 455 */ 456 /* the wait loop below verifies this write operation has been done 457 and processed 458 */ 459 writeb(START_DOWNLOAD, &icom_port->dram->sync); 460 461 /* Wait max 1 Sec for data download and processor to start */ 462 for (index = 0; index < 10; index++) { 463 msleep(100); 464 if (readb(&icom_port->dram->misc_flags) & ICOM_HDW_ACTIVE) 465 break; 466 } 467 468 if (index == 10) 469 status = -1; 470 471 /* 472 * check Cable ID 473 */ 474 cable_id = readb(&icom_port->dram->cable_id); 475 476 if (cable_id & ICOM_CABLE_ID_VALID) { 477 /* Get cable ID into the lower 4 bits (standard form) */ 478 cable_id = (cable_id & ICOM_CABLE_ID_MASK) >> 4; 479 icom_port->cable_id = cable_id; 480 } else { 481 dev_err(&dev->dev,"Invalid or no cable attached\n"); 482 icom_port->cable_id = NO_CABLE; 483 } 484 485 load_code_exit: 486 487 if (status != 0) { 488 /* Clear out any pending interrupts */ 489 writew(0x3FFF, icom_port->int_reg); 490 491 /* Turn off port */ 492 writeb(ICOM_DISABLE, &(icom_port->dram->disable)); 493 494 /* Stop processor */ 495 stop_processor(icom_port); 496 497 dev_err(&icom_port->adapter->pci_dev->dev,"Port not operational\n"); 498 } 499 500 if (new_page != NULL) 501 dma_free_coherent(&dev->dev, 4096, new_page, temp_pci); 502 } 503 504 static int startup(struct icom_port *icom_port) 505 { 506 unsigned long temp; 507 unsigned char cable_id, raw_cable_id; 508 unsigned long flags; 509 int port; 510 511 trace(icom_port, "STARTUP", 0); 512 513 if (!icom_port->dram) { 514 /* should NEVER be NULL */ 515 dev_err(&icom_port->adapter->pci_dev->dev, 516 "Unusable Port, port configuration missing\n"); 517 return -ENODEV; 518 } 519 520 /* 521 * check Cable ID 522 */ 523 raw_cable_id = readb(&icom_port->dram->cable_id); 524 trace(icom_port, "CABLE_ID", raw_cable_id); 525 526 /* Get cable ID into the lower 4 bits (standard form) */ 527 cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; 528 529 /* Check for valid Cable ID */ 530 if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || 531 (cable_id != icom_port->cable_id)) { 532 533 /* reload adapter code, pick up any potential changes in cable id */ 534 load_code(icom_port); 535 536 /* still no sign of cable, error out */ 537 raw_cable_id = readb(&icom_port->dram->cable_id); 538 cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; 539 if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || 540 (icom_port->cable_id == NO_CABLE)) 541 return -EIO; 542 } 543 544 /* 545 * Finally, clear and enable interrupts 546 */ 547 spin_lock_irqsave(&icom_lock, flags); 548 port = icom_port->port; 549 if (port >= ARRAY_SIZE(int_mask_tbl)) { 550 dev_err(&icom_port->adapter->pci_dev->dev, 551 "Invalid port assignment\n"); 552 goto unlock; 553 } 554 555 if (port == 0 || port == 1) 556 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; 557 else 558 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; 559 560 if (port == 0 || port == 2) 561 writew(0x00FF, icom_port->int_reg); 562 else 563 writew(0x3F00, icom_port->int_reg); 564 565 temp = readl(int_mask_tbl[port].global_int_mask); 566 writel(temp & ~int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); 567 568 /* write flush */ 569 readl(int_mask_tbl[port].global_int_mask); 570 571 unlock: 572 spin_unlock_irqrestore(&icom_lock, flags); 573 return 0; 574 } 575 576 static void shutdown(struct icom_port *icom_port) 577 { 578 unsigned long temp; 579 unsigned char cmdReg; 580 unsigned long flags; 581 int port; 582 583 spin_lock_irqsave(&icom_lock, flags); 584 trace(icom_port, "SHUTDOWN", 0); 585 586 /* 587 * disable all interrupts 588 */ 589 port = icom_port->port; 590 if (port >= ARRAY_SIZE(int_mask_tbl)) { 591 dev_err(&icom_port->adapter->pci_dev->dev, 592 "Invalid port assignment\n"); 593 goto unlock; 594 } 595 if (port == 0 || port == 1) 596 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; 597 else 598 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; 599 600 temp = readl(int_mask_tbl[port].global_int_mask); 601 writel(temp | int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); 602 603 /* write flush */ 604 readl(int_mask_tbl[port].global_int_mask); 605 606 unlock: 607 spin_unlock_irqrestore(&icom_lock, flags); 608 609 /* 610 * disable break condition 611 */ 612 cmdReg = readb(&icom_port->dram->CmdReg); 613 if (cmdReg & CMD_SND_BREAK) { 614 writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg); 615 } 616 } 617 618 static int icom_write(struct uart_port *port) 619 { 620 unsigned long data_count; 621 unsigned char cmdReg; 622 unsigned long offset; 623 int temp_tail = port->state->xmit.tail; 624 625 trace(ICOM_PORT, "WRITE", 0); 626 627 if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & 628 SA_FLAGS_READY_TO_XMIT) { 629 trace(ICOM_PORT, "WRITE_FULL", 0); 630 return 0; 631 } 632 633 data_count = 0; 634 while ((port->state->xmit.head != temp_tail) && 635 (data_count <= XMIT_BUFF_SZ)) { 636 637 ICOM_PORT->xmit_buf[data_count++] = 638 port->state->xmit.buf[temp_tail]; 639 640 temp_tail++; 641 temp_tail &= (UART_XMIT_SIZE - 1); 642 } 643 644 if (data_count) { 645 ICOM_PORT->statStg->xmit[0].flags = 646 cpu_to_le16(SA_FLAGS_READY_TO_XMIT); 647 ICOM_PORT->statStg->xmit[0].leLength = 648 cpu_to_le16(data_count); 649 offset = 650 (unsigned long) &ICOM_PORT->statStg->xmit[0] - 651 (unsigned long) ICOM_PORT->statStg; 652 *ICOM_PORT->xmitRestart = 653 cpu_to_le32(ICOM_PORT->statStg_pci + offset); 654 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 655 writeb(cmdReg | CMD_XMIT_RCV_ENABLE, 656 &ICOM_PORT->dram->CmdReg); 657 writeb(START_XMIT, &ICOM_PORT->dram->StartXmitCmd); 658 trace(ICOM_PORT, "WRITE_START", data_count); 659 /* write flush */ 660 readb(&ICOM_PORT->dram->StartXmitCmd); 661 } 662 663 return data_count; 664 } 665 666 static inline void check_modem_status(struct icom_port *icom_port) 667 { 668 static char old_status = 0; 669 char delta_status; 670 unsigned char status; 671 672 spin_lock(&icom_port->uart_port.lock); 673 674 /*modem input register */ 675 status = readb(&icom_port->dram->isr); 676 trace(icom_port, "CHECK_MODEM", status); 677 delta_status = status ^ old_status; 678 if (delta_status) { 679 if (delta_status & ICOM_RI) 680 icom_port->uart_port.icount.rng++; 681 if (delta_status & ICOM_DSR) 682 icom_port->uart_port.icount.dsr++; 683 if (delta_status & ICOM_DCD) 684 uart_handle_dcd_change(&icom_port->uart_port, 685 delta_status & ICOM_DCD); 686 if (delta_status & ICOM_CTS) 687 uart_handle_cts_change(&icom_port->uart_port, 688 delta_status & ICOM_CTS); 689 690 wake_up_interruptible(&icom_port->uart_port.state-> 691 port.delta_msr_wait); 692 old_status = status; 693 } 694 spin_unlock(&icom_port->uart_port.lock); 695 } 696 697 static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port) 698 { 699 unsigned short int count; 700 int i; 701 702 if (port_int_reg & (INT_XMIT_COMPLETED)) { 703 trace(icom_port, "XMIT_COMPLETE", 0); 704 705 /* clear buffer in use bit */ 706 icom_port->statStg->xmit[0].flags &= 707 cpu_to_le16(~SA_FLAGS_READY_TO_XMIT); 708 709 count = (unsigned short int) 710 cpu_to_le16(icom_port->statStg->xmit[0].leLength); 711 icom_port->uart_port.icount.tx += count; 712 713 for (i=0; i<count && 714 !uart_circ_empty(&icom_port->uart_port.state->xmit); i++) { 715 716 icom_port->uart_port.state->xmit.tail++; 717 icom_port->uart_port.state->xmit.tail &= 718 (UART_XMIT_SIZE - 1); 719 } 720 721 if (!icom_write(&icom_port->uart_port)) 722 /* activate write queue */ 723 uart_write_wakeup(&icom_port->uart_port); 724 } else 725 trace(icom_port, "XMIT_DISABLED", 0); 726 } 727 728 static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port) 729 { 730 short int count, rcv_buff; 731 struct tty_port *port = &icom_port->uart_port.state->port; 732 unsigned short int status; 733 struct uart_icount *icount; 734 unsigned long offset; 735 unsigned char flag; 736 737 trace(icom_port, "RCV_COMPLETE", 0); 738 rcv_buff = icom_port->next_rcv; 739 740 status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); 741 while (status & SA_FL_RCV_DONE) { 742 int first = -1; 743 744 trace(icom_port, "FID_STATUS", status); 745 count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength); 746 747 trace(icom_port, "RCV_COUNT", count); 748 749 trace(icom_port, "REAL_COUNT", count); 750 751 offset = 752 cpu_to_le32(icom_port->statStg->rcv[rcv_buff].leBuffer) - 753 icom_port->recv_buf_pci; 754 755 /* Block copy all but the last byte as this may have status */ 756 if (count > 0) { 757 first = icom_port->recv_buf[offset]; 758 tty_insert_flip_string(port, icom_port->recv_buf + offset, count - 1); 759 } 760 761 icount = &icom_port->uart_port.icount; 762 icount->rx += count; 763 764 /* Break detect logic */ 765 if ((status & SA_FLAGS_FRAME_ERROR) 766 && first == 0) { 767 status &= ~SA_FLAGS_FRAME_ERROR; 768 status |= SA_FLAGS_BREAK_DET; 769 trace(icom_port, "BREAK_DET", 0); 770 } 771 772 flag = TTY_NORMAL; 773 774 if (status & 775 (SA_FLAGS_BREAK_DET | SA_FLAGS_PARITY_ERROR | 776 SA_FLAGS_FRAME_ERROR | SA_FLAGS_OVERRUN)) { 777 778 if (status & SA_FLAGS_BREAK_DET) 779 icount->brk++; 780 if (status & SA_FLAGS_PARITY_ERROR) 781 icount->parity++; 782 if (status & SA_FLAGS_FRAME_ERROR) 783 icount->frame++; 784 if (status & SA_FLAGS_OVERRUN) 785 icount->overrun++; 786 787 /* 788 * Now check to see if character should be 789 * ignored, and mask off conditions which 790 * should be ignored. 791 */ 792 if (status & icom_port->ignore_status_mask) { 793 trace(icom_port, "IGNORE_CHAR", 0); 794 goto ignore_char; 795 } 796 797 status &= icom_port->read_status_mask; 798 799 if (status & SA_FLAGS_BREAK_DET) { 800 flag = TTY_BREAK; 801 } else if (status & SA_FLAGS_PARITY_ERROR) { 802 trace(icom_port, "PARITY_ERROR", 0); 803 flag = TTY_PARITY; 804 } else if (status & SA_FLAGS_FRAME_ERROR) 805 flag = TTY_FRAME; 806 807 } 808 809 tty_insert_flip_char(port, *(icom_port->recv_buf + offset + count - 1), flag); 810 811 if (status & SA_FLAGS_OVERRUN) 812 /* 813 * Overrun is special, since it's 814 * reported immediately, and doesn't 815 * affect the current character 816 */ 817 tty_insert_flip_char(port, 0, TTY_OVERRUN); 818 ignore_char: 819 icom_port->statStg->rcv[rcv_buff].flags = 0; 820 icom_port->statStg->rcv[rcv_buff].leLength = 0; 821 icom_port->statStg->rcv[rcv_buff].WorkingLength = 822 (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); 823 824 rcv_buff++; 825 if (rcv_buff == NUM_RBUFFS) 826 rcv_buff = 0; 827 828 status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); 829 } 830 icom_port->next_rcv = rcv_buff; 831 832 tty_flip_buffer_push(port); 833 } 834 835 static void process_interrupt(u16 port_int_reg, 836 struct icom_port *icom_port) 837 { 838 839 spin_lock(&icom_port->uart_port.lock); 840 trace(icom_port, "INTERRUPT", port_int_reg); 841 842 if (port_int_reg & (INT_XMIT_COMPLETED | INT_XMIT_DISABLED)) 843 xmit_interrupt(port_int_reg, icom_port); 844 845 if (port_int_reg & INT_RCV_COMPLETED) 846 recv_interrupt(port_int_reg, icom_port); 847 848 spin_unlock(&icom_port->uart_port.lock); 849 } 850 851 static irqreturn_t icom_interrupt(int irq, void *dev_id) 852 { 853 void __iomem * int_reg; 854 u32 adapter_interrupts; 855 u16 port_int_reg; 856 struct icom_adapter *icom_adapter; 857 struct icom_port *icom_port; 858 859 /* find icom_port for this interrupt */ 860 icom_adapter = (struct icom_adapter *) dev_id; 861 862 if (icom_adapter->version == ADAPTER_V2) { 863 int_reg = icom_adapter->base_addr + 0x8024; 864 865 adapter_interrupts = readl(int_reg); 866 867 if (adapter_interrupts & 0x00003FFF) { 868 /* port 2 interrupt, NOTE: for all ADAPTER_V2, port 2 will be active */ 869 icom_port = &icom_adapter->port_info[2]; 870 port_int_reg = (u16) adapter_interrupts; 871 process_interrupt(port_int_reg, icom_port); 872 check_modem_status(icom_port); 873 } 874 if (adapter_interrupts & 0x3FFF0000) { 875 /* port 3 interrupt */ 876 icom_port = &icom_adapter->port_info[3]; 877 if (icom_port->status == ICOM_PORT_ACTIVE) { 878 port_int_reg = 879 (u16) (adapter_interrupts >> 16); 880 process_interrupt(port_int_reg, icom_port); 881 check_modem_status(icom_port); 882 } 883 } 884 885 /* Clear out any pending interrupts */ 886 writel(adapter_interrupts, int_reg); 887 888 int_reg = icom_adapter->base_addr + 0x8004; 889 } else { 890 int_reg = icom_adapter->base_addr + 0x4004; 891 } 892 893 adapter_interrupts = readl(int_reg); 894 895 if (adapter_interrupts & 0x00003FFF) { 896 /* port 0 interrupt, NOTE: for all adapters, port 0 will be active */ 897 icom_port = &icom_adapter->port_info[0]; 898 port_int_reg = (u16) adapter_interrupts; 899 process_interrupt(port_int_reg, icom_port); 900 check_modem_status(icom_port); 901 } 902 if (adapter_interrupts & 0x3FFF0000) { 903 /* port 1 interrupt */ 904 icom_port = &icom_adapter->port_info[1]; 905 if (icom_port->status == ICOM_PORT_ACTIVE) { 906 port_int_reg = (u16) (adapter_interrupts >> 16); 907 process_interrupt(port_int_reg, icom_port); 908 check_modem_status(icom_port); 909 } 910 } 911 912 /* Clear out any pending interrupts */ 913 writel(adapter_interrupts, int_reg); 914 915 /* flush the write */ 916 adapter_interrupts = readl(int_reg); 917 918 return IRQ_HANDLED; 919 } 920 921 /* 922 * ------------------------------------------------------------------ 923 * Begin serial-core API 924 * ------------------------------------------------------------------ 925 */ 926 static unsigned int icom_tx_empty(struct uart_port *port) 927 { 928 int ret; 929 unsigned long flags; 930 931 spin_lock_irqsave(&port->lock, flags); 932 if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & 933 SA_FLAGS_READY_TO_XMIT) 934 ret = TIOCSER_TEMT; 935 else 936 ret = 0; 937 938 spin_unlock_irqrestore(&port->lock, flags); 939 return ret; 940 } 941 942 static void icom_set_mctrl(struct uart_port *port, unsigned int mctrl) 943 { 944 unsigned char local_osr; 945 946 trace(ICOM_PORT, "SET_MODEM", 0); 947 local_osr = readb(&ICOM_PORT->dram->osr); 948 949 if (mctrl & TIOCM_RTS) { 950 trace(ICOM_PORT, "RAISE_RTS", 0); 951 local_osr |= ICOM_RTS; 952 } else { 953 trace(ICOM_PORT, "LOWER_RTS", 0); 954 local_osr &= ~ICOM_RTS; 955 } 956 957 if (mctrl & TIOCM_DTR) { 958 trace(ICOM_PORT, "RAISE_DTR", 0); 959 local_osr |= ICOM_DTR; 960 } else { 961 trace(ICOM_PORT, "LOWER_DTR", 0); 962 local_osr &= ~ICOM_DTR; 963 } 964 965 writeb(local_osr, &ICOM_PORT->dram->osr); 966 } 967 968 static unsigned int icom_get_mctrl(struct uart_port *port) 969 { 970 unsigned char status; 971 unsigned int result; 972 973 trace(ICOM_PORT, "GET_MODEM", 0); 974 975 status = readb(&ICOM_PORT->dram->isr); 976 977 result = ((status & ICOM_DCD) ? TIOCM_CAR : 0) 978 | ((status & ICOM_RI) ? TIOCM_RNG : 0) 979 | ((status & ICOM_DSR) ? TIOCM_DSR : 0) 980 | ((status & ICOM_CTS) ? TIOCM_CTS : 0); 981 return result; 982 } 983 984 static void icom_stop_tx(struct uart_port *port) 985 { 986 unsigned char cmdReg; 987 988 trace(ICOM_PORT, "STOP", 0); 989 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 990 writeb(cmdReg | CMD_HOLD_XMIT, &ICOM_PORT->dram->CmdReg); 991 } 992 993 static void icom_start_tx(struct uart_port *port) 994 { 995 unsigned char cmdReg; 996 997 trace(ICOM_PORT, "START", 0); 998 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 999 if ((cmdReg & CMD_HOLD_XMIT) == CMD_HOLD_XMIT) 1000 writeb(cmdReg & ~CMD_HOLD_XMIT, 1001 &ICOM_PORT->dram->CmdReg); 1002 1003 icom_write(port); 1004 } 1005 1006 static void icom_send_xchar(struct uart_port *port, char ch) 1007 { 1008 unsigned char xdata; 1009 int index; 1010 unsigned long flags; 1011 1012 trace(ICOM_PORT, "SEND_XCHAR", ch); 1013 1014 /* wait .1 sec to send char */ 1015 for (index = 0; index < 10; index++) { 1016 spin_lock_irqsave(&port->lock, flags); 1017 xdata = readb(&ICOM_PORT->dram->xchar); 1018 if (xdata == 0x00) { 1019 trace(ICOM_PORT, "QUICK_WRITE", 0); 1020 writeb(ch, &ICOM_PORT->dram->xchar); 1021 1022 /* flush write operation */ 1023 xdata = readb(&ICOM_PORT->dram->xchar); 1024 spin_unlock_irqrestore(&port->lock, flags); 1025 break; 1026 } 1027 spin_unlock_irqrestore(&port->lock, flags); 1028 msleep(10); 1029 } 1030 } 1031 1032 static void icom_stop_rx(struct uart_port *port) 1033 { 1034 unsigned char cmdReg; 1035 1036 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 1037 writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); 1038 } 1039 1040 static void icom_break(struct uart_port *port, int break_state) 1041 { 1042 unsigned char cmdReg; 1043 unsigned long flags; 1044 1045 spin_lock_irqsave(&port->lock, flags); 1046 trace(ICOM_PORT, "BREAK", 0); 1047 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 1048 if (break_state == -1) { 1049 writeb(cmdReg | CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); 1050 } else { 1051 writeb(cmdReg & ~CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); 1052 } 1053 spin_unlock_irqrestore(&port->lock, flags); 1054 } 1055 1056 static int icom_open(struct uart_port *port) 1057 { 1058 int retval; 1059 1060 kref_get(&ICOM_PORT->adapter->kref); 1061 retval = startup(ICOM_PORT); 1062 1063 if (retval) { 1064 kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); 1065 trace(ICOM_PORT, "STARTUP_ERROR", 0); 1066 return retval; 1067 } 1068 1069 return 0; 1070 } 1071 1072 static void icom_close(struct uart_port *port) 1073 { 1074 unsigned char cmdReg; 1075 1076 trace(ICOM_PORT, "CLOSE", 0); 1077 1078 /* stop receiver */ 1079 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 1080 writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); 1081 1082 shutdown(ICOM_PORT); 1083 1084 kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); 1085 } 1086 1087 static void icom_set_termios(struct uart_port *port, 1088 struct ktermios *termios, 1089 struct ktermios *old_termios) 1090 { 1091 int baud; 1092 unsigned cflag, iflag; 1093 char new_config2; 1094 char new_config3 = 0; 1095 char tmp_byte; 1096 int index; 1097 int rcv_buff, xmit_buff; 1098 unsigned long offset; 1099 unsigned long flags; 1100 1101 spin_lock_irqsave(&port->lock, flags); 1102 trace(ICOM_PORT, "CHANGE_SPEED", 0); 1103 1104 cflag = termios->c_cflag; 1105 iflag = termios->c_iflag; 1106 1107 new_config2 = ICOM_ACFG_DRIVE1; 1108 1109 /* byte size and parity */ 1110 switch (cflag & CSIZE) { 1111 case CS5: /* 5 bits/char */ 1112 new_config2 |= ICOM_ACFG_5BPC; 1113 break; 1114 case CS6: /* 6 bits/char */ 1115 new_config2 |= ICOM_ACFG_6BPC; 1116 break; 1117 case CS7: /* 7 bits/char */ 1118 new_config2 |= ICOM_ACFG_7BPC; 1119 break; 1120 case CS8: /* 8 bits/char */ 1121 new_config2 |= ICOM_ACFG_8BPC; 1122 break; 1123 default: 1124 break; 1125 } 1126 if (cflag & CSTOPB) { 1127 /* 2 stop bits */ 1128 new_config2 |= ICOM_ACFG_2STOP_BIT; 1129 } 1130 if (cflag & PARENB) { 1131 /* parity bit enabled */ 1132 new_config2 |= ICOM_ACFG_PARITY_ENAB; 1133 trace(ICOM_PORT, "PARENB", 0); 1134 } 1135 if (cflag & PARODD) { 1136 /* odd parity */ 1137 new_config2 |= ICOM_ACFG_PARITY_ODD; 1138 trace(ICOM_PORT, "PARODD", 0); 1139 } 1140 1141 /* Determine divisor based on baud rate */ 1142 baud = uart_get_baud_rate(port, termios, old_termios, 1143 icom_acfg_baud[0], 1144 icom_acfg_baud[BAUD_TABLE_LIMIT]); 1145 if (!baud) 1146 baud = 9600; /* B0 transition handled in rs_set_termios */ 1147 1148 for (index = 0; index < BAUD_TABLE_LIMIT; index++) { 1149 if (icom_acfg_baud[index] == baud) { 1150 new_config3 = index; 1151 break; 1152 } 1153 } 1154 1155 uart_update_timeout(port, cflag, baud); 1156 1157 /* CTS flow control flag and modem status interrupts */ 1158 tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); 1159 if (cflag & CRTSCTS) 1160 tmp_byte |= HDLC_HDW_FLOW; 1161 else 1162 tmp_byte &= ~HDLC_HDW_FLOW; 1163 writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); 1164 1165 /* 1166 * Set up parity check flag 1167 */ 1168 ICOM_PORT->read_status_mask = SA_FLAGS_OVERRUN | SA_FL_RCV_DONE; 1169 if (iflag & INPCK) 1170 ICOM_PORT->read_status_mask |= 1171 SA_FLAGS_FRAME_ERROR | SA_FLAGS_PARITY_ERROR; 1172 1173 if ((iflag & BRKINT) || (iflag & PARMRK)) 1174 ICOM_PORT->read_status_mask |= SA_FLAGS_BREAK_DET; 1175 1176 /* 1177 * Characters to ignore 1178 */ 1179 ICOM_PORT->ignore_status_mask = 0; 1180 if (iflag & IGNPAR) 1181 ICOM_PORT->ignore_status_mask |= 1182 SA_FLAGS_PARITY_ERROR | SA_FLAGS_FRAME_ERROR; 1183 if (iflag & IGNBRK) { 1184 ICOM_PORT->ignore_status_mask |= SA_FLAGS_BREAK_DET; 1185 /* 1186 * If we're ignore parity and break indicators, ignore 1187 * overruns too. (For real raw support). 1188 */ 1189 if (iflag & IGNPAR) 1190 ICOM_PORT->ignore_status_mask |= SA_FLAGS_OVERRUN; 1191 } 1192 1193 /* 1194 * !!! ignore all characters if CREAD is not set 1195 */ 1196 if ((cflag & CREAD) == 0) 1197 ICOM_PORT->ignore_status_mask |= SA_FL_RCV_DONE; 1198 1199 /* Turn off Receiver to prepare for reset */ 1200 writeb(CMD_RCV_DISABLE, &ICOM_PORT->dram->CmdReg); 1201 1202 for (index = 0; index < 10; index++) { 1203 if (readb(&ICOM_PORT->dram->PrevCmdReg) == 0x00) { 1204 break; 1205 } 1206 } 1207 1208 /* clear all current buffers of data */ 1209 for (rcv_buff = 0; rcv_buff < NUM_RBUFFS; rcv_buff++) { 1210 ICOM_PORT->statStg->rcv[rcv_buff].flags = 0; 1211 ICOM_PORT->statStg->rcv[rcv_buff].leLength = 0; 1212 ICOM_PORT->statStg->rcv[rcv_buff].WorkingLength = 1213 (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); 1214 } 1215 1216 for (xmit_buff = 0; xmit_buff < NUM_XBUFFS; xmit_buff++) { 1217 ICOM_PORT->statStg->xmit[xmit_buff].flags = 0; 1218 } 1219 1220 /* activate changes and start xmit and receiver here */ 1221 /* Enable the receiver */ 1222 writeb(new_config3, &(ICOM_PORT->dram->async_config3)); 1223 writeb(new_config2, &(ICOM_PORT->dram->async_config2)); 1224 tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); 1225 tmp_byte |= HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL; 1226 writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); 1227 writeb(0x04, &(ICOM_PORT->dram->FlagFillIdleTimer)); /* 0.5 seconds */ 1228 writeb(0xFF, &(ICOM_PORT->dram->ier)); /* enable modem signal interrupts */ 1229 1230 /* reset processor */ 1231 writeb(CMD_RESTART, &ICOM_PORT->dram->CmdReg); 1232 1233 for (index = 0; index < 10; index++) { 1234 if (readb(&ICOM_PORT->dram->CmdReg) == 0x00) { 1235 break; 1236 } 1237 } 1238 1239 /* Enable Transmitter and Receiver */ 1240 offset = 1241 (unsigned long) &ICOM_PORT->statStg->rcv[0] - 1242 (unsigned long) ICOM_PORT->statStg; 1243 writel(ICOM_PORT->statStg_pci + offset, 1244 &ICOM_PORT->dram->RcvStatusAddr); 1245 ICOM_PORT->next_rcv = 0; 1246 ICOM_PORT->put_length = 0; 1247 *ICOM_PORT->xmitRestart = 0; 1248 writel(ICOM_PORT->xmitRestart_pci, 1249 &ICOM_PORT->dram->XmitStatusAddr); 1250 trace(ICOM_PORT, "XR_ENAB", 0); 1251 writeb(CMD_XMIT_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); 1252 1253 spin_unlock_irqrestore(&port->lock, flags); 1254 } 1255 1256 static const char *icom_type(struct uart_port *port) 1257 { 1258 return "icom"; 1259 } 1260 1261 static void icom_release_port(struct uart_port *port) 1262 { 1263 } 1264 1265 static int icom_request_port(struct uart_port *port) 1266 { 1267 return 0; 1268 } 1269 1270 static void icom_config_port(struct uart_port *port, int flags) 1271 { 1272 port->type = PORT_ICOM; 1273 } 1274 1275 static const struct uart_ops icom_ops = { 1276 .tx_empty = icom_tx_empty, 1277 .set_mctrl = icom_set_mctrl, 1278 .get_mctrl = icom_get_mctrl, 1279 .stop_tx = icom_stop_tx, 1280 .start_tx = icom_start_tx, 1281 .send_xchar = icom_send_xchar, 1282 .stop_rx = icom_stop_rx, 1283 .break_ctl = icom_break, 1284 .startup = icom_open, 1285 .shutdown = icom_close, 1286 .set_termios = icom_set_termios, 1287 .type = icom_type, 1288 .release_port = icom_release_port, 1289 .request_port = icom_request_port, 1290 .config_port = icom_config_port, 1291 }; 1292 1293 #define ICOM_CONSOLE NULL 1294 1295 static struct uart_driver icom_uart_driver = { 1296 .owner = THIS_MODULE, 1297 .driver_name = ICOM_DRIVER_NAME, 1298 .dev_name = "ttyA", 1299 .major = ICOM_MAJOR, 1300 .minor = ICOM_MINOR_START, 1301 .nr = NR_PORTS, 1302 .cons = ICOM_CONSOLE, 1303 }; 1304 1305 static int icom_init_ports(struct icom_adapter *icom_adapter) 1306 { 1307 u32 subsystem_id = icom_adapter->subsystem_id; 1308 int i; 1309 struct icom_port *icom_port; 1310 1311 if (icom_adapter->version == ADAPTER_V1) { 1312 icom_adapter->numb_ports = 2; 1313 1314 for (i = 0; i < 2; i++) { 1315 icom_port = &icom_adapter->port_info[i]; 1316 icom_port->port = i; 1317 icom_port->status = ICOM_PORT_ACTIVE; 1318 icom_port->imbed_modem = ICOM_UNKNOWN; 1319 } 1320 } else { 1321 if (subsystem_id == PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL) { 1322 icom_adapter->numb_ports = 4; 1323 1324 for (i = 0; i < 4; i++) { 1325 icom_port = &icom_adapter->port_info[i]; 1326 1327 icom_port->port = i; 1328 icom_port->status = ICOM_PORT_ACTIVE; 1329 icom_port->imbed_modem = ICOM_IMBED_MODEM; 1330 } 1331 } else { 1332 icom_adapter->numb_ports = 4; 1333 1334 icom_adapter->port_info[0].port = 0; 1335 icom_adapter->port_info[0].status = ICOM_PORT_ACTIVE; 1336 1337 if (subsystem_id == 1338 PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM) { 1339 icom_adapter->port_info[0].imbed_modem = ICOM_IMBED_MODEM; 1340 } else { 1341 icom_adapter->port_info[0].imbed_modem = ICOM_RVX; 1342 } 1343 1344 icom_adapter->port_info[1].status = ICOM_PORT_OFF; 1345 1346 icom_adapter->port_info[2].port = 2; 1347 icom_adapter->port_info[2].status = ICOM_PORT_ACTIVE; 1348 icom_adapter->port_info[2].imbed_modem = ICOM_RVX; 1349 icom_adapter->port_info[3].status = ICOM_PORT_OFF; 1350 } 1351 } 1352 1353 return 0; 1354 } 1355 1356 static void icom_port_active(struct icom_port *icom_port, struct icom_adapter *icom_adapter, int port_num) 1357 { 1358 if (icom_adapter->version == ADAPTER_V1) { 1359 icom_port->global_reg = icom_adapter->base_addr + 0x4000; 1360 icom_port->int_reg = icom_adapter->base_addr + 1361 0x4004 + 2 - 2 * port_num; 1362 } else { 1363 icom_port->global_reg = icom_adapter->base_addr + 0x8000; 1364 if (icom_port->port < 2) 1365 icom_port->int_reg = icom_adapter->base_addr + 1366 0x8004 + 2 - 2 * icom_port->port; 1367 else 1368 icom_port->int_reg = icom_adapter->base_addr + 1369 0x8024 + 2 - 2 * (icom_port->port - 2); 1370 } 1371 } 1372 static int icom_load_ports(struct icom_adapter *icom_adapter) 1373 { 1374 struct icom_port *icom_port; 1375 int port_num; 1376 1377 for (port_num = 0; port_num < icom_adapter->numb_ports; port_num++) { 1378 1379 icom_port = &icom_adapter->port_info[port_num]; 1380 1381 if (icom_port->status == ICOM_PORT_ACTIVE) { 1382 icom_port_active(icom_port, icom_adapter, port_num); 1383 icom_port->dram = icom_adapter->base_addr + 1384 0x2000 * icom_port->port; 1385 1386 icom_port->adapter = icom_adapter; 1387 1388 /* get port memory */ 1389 if (get_port_memory(icom_port) != 0) { 1390 dev_err(&icom_port->adapter->pci_dev->dev, 1391 "Memory allocation for port FAILED\n"); 1392 } 1393 } 1394 } 1395 return 0; 1396 } 1397 1398 static int icom_alloc_adapter(struct icom_adapter 1399 **icom_adapter_ref) 1400 { 1401 int adapter_count = 0; 1402 struct icom_adapter *icom_adapter; 1403 struct icom_adapter *cur_adapter_entry; 1404 struct list_head *tmp; 1405 1406 icom_adapter = kzalloc(sizeof(struct icom_adapter), GFP_KERNEL); 1407 1408 if (!icom_adapter) { 1409 return -ENOMEM; 1410 } 1411 1412 list_for_each(tmp, &icom_adapter_head) { 1413 cur_adapter_entry = 1414 list_entry(tmp, struct icom_adapter, 1415 icom_adapter_entry); 1416 if (cur_adapter_entry->index != adapter_count) { 1417 break; 1418 } 1419 adapter_count++; 1420 } 1421 1422 icom_adapter->index = adapter_count; 1423 list_add_tail(&icom_adapter->icom_adapter_entry, tmp); 1424 1425 *icom_adapter_ref = icom_adapter; 1426 return 0; 1427 } 1428 1429 static void icom_free_adapter(struct icom_adapter *icom_adapter) 1430 { 1431 list_del(&icom_adapter->icom_adapter_entry); 1432 kfree(icom_adapter); 1433 } 1434 1435 static void icom_remove_adapter(struct icom_adapter *icom_adapter) 1436 { 1437 struct icom_port *icom_port; 1438 int index; 1439 1440 for (index = 0; index < icom_adapter->numb_ports; index++) { 1441 icom_port = &icom_adapter->port_info[index]; 1442 1443 if (icom_port->status == ICOM_PORT_ACTIVE) { 1444 dev_info(&icom_adapter->pci_dev->dev, 1445 "Device removed\n"); 1446 1447 uart_remove_one_port(&icom_uart_driver, 1448 &icom_port->uart_port); 1449 1450 /* be sure that DTR and RTS are dropped */ 1451 writeb(0x00, &icom_port->dram->osr); 1452 1453 /* Wait 0.1 Sec for simple Init to complete */ 1454 msleep(100); 1455 1456 /* Stop proccessor */ 1457 stop_processor(icom_port); 1458 1459 free_port_memory(icom_port); 1460 } 1461 } 1462 1463 free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter); 1464 iounmap(icom_adapter->base_addr); 1465 pci_release_regions(icom_adapter->pci_dev); 1466 icom_free_adapter(icom_adapter); 1467 } 1468 1469 static void icom_kref_release(struct kref *kref) 1470 { 1471 struct icom_adapter *icom_adapter; 1472 1473 icom_adapter = to_icom_adapter(kref); 1474 icom_remove_adapter(icom_adapter); 1475 } 1476 1477 static int icom_probe(struct pci_dev *dev, 1478 const struct pci_device_id *ent) 1479 { 1480 int index; 1481 unsigned int command_reg; 1482 int retval; 1483 struct icom_adapter *icom_adapter; 1484 struct icom_port *icom_port; 1485 1486 retval = pci_enable_device(dev); 1487 if (retval) { 1488 dev_err(&dev->dev, "Device enable FAILED\n"); 1489 return retval; 1490 } 1491 1492 retval = pci_request_regions(dev, "icom"); 1493 if (retval) { 1494 dev_err(&dev->dev, "pci_request_regions FAILED\n"); 1495 pci_disable_device(dev); 1496 return retval; 1497 } 1498 1499 pci_set_master(dev); 1500 1501 retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg); 1502 if (retval) { 1503 dev_err(&dev->dev, "PCI Config read FAILED\n"); 1504 goto probe_exit0; 1505 } 1506 1507 pci_write_config_dword(dev, PCI_COMMAND, 1508 command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER 1509 | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); 1510 1511 if (ent->driver_data == ADAPTER_V1) { 1512 pci_write_config_dword(dev, 0x44, 0x8300830A); 1513 } else { 1514 pci_write_config_dword(dev, 0x44, 0x42004200); 1515 pci_write_config_dword(dev, 0x48, 0x42004200); 1516 } 1517 1518 1519 retval = icom_alloc_adapter(&icom_adapter); 1520 if (retval) { 1521 dev_err(&dev->dev, "icom_alloc_adapter FAILED\n"); 1522 retval = -EIO; 1523 goto probe_exit0; 1524 } 1525 1526 icom_adapter->base_addr_pci = pci_resource_start(dev, 0); 1527 icom_adapter->pci_dev = dev; 1528 icom_adapter->version = ent->driver_data; 1529 icom_adapter->subsystem_id = ent->subdevice; 1530 1531 1532 retval = icom_init_ports(icom_adapter); 1533 if (retval) { 1534 dev_err(&dev->dev, "Port configuration failed\n"); 1535 goto probe_exit1; 1536 } 1537 1538 icom_adapter->base_addr = pci_ioremap_bar(dev, 0); 1539 1540 if (!icom_adapter->base_addr) { 1541 retval = -ENOMEM; 1542 goto probe_exit1; 1543 } 1544 1545 /* save off irq and request irq line */ 1546 retval = request_irq(dev->irq, icom_interrupt, IRQF_SHARED, ICOM_DRIVER_NAME, (void *)icom_adapter); 1547 if (retval) { 1548 goto probe_exit2; 1549 } 1550 1551 retval = icom_load_ports(icom_adapter); 1552 1553 for (index = 0; index < icom_adapter->numb_ports; index++) { 1554 icom_port = &icom_adapter->port_info[index]; 1555 1556 if (icom_port->status == ICOM_PORT_ACTIVE) { 1557 icom_port->uart_port.irq = icom_port->adapter->pci_dev->irq; 1558 icom_port->uart_port.type = PORT_ICOM; 1559 icom_port->uart_port.iotype = UPIO_MEM; 1560 icom_port->uart_port.membase = 1561 (unsigned char __iomem *)icom_adapter->base_addr_pci; 1562 icom_port->uart_port.fifosize = 16; 1563 icom_port->uart_port.ops = &icom_ops; 1564 icom_port->uart_port.line = 1565 icom_port->port + icom_adapter->index * 4; 1566 if (uart_add_one_port (&icom_uart_driver, &icom_port->uart_port)) { 1567 icom_port->status = ICOM_PORT_OFF; 1568 dev_err(&dev->dev, "Device add failed\n"); 1569 } else 1570 dev_info(&dev->dev, "Device added\n"); 1571 } 1572 } 1573 1574 kref_init(&icom_adapter->kref); 1575 return 0; 1576 1577 probe_exit2: 1578 iounmap(icom_adapter->base_addr); 1579 probe_exit1: 1580 icom_free_adapter(icom_adapter); 1581 1582 probe_exit0: 1583 pci_release_regions(dev); 1584 pci_disable_device(dev); 1585 1586 return retval; 1587 } 1588 1589 static void icom_remove(struct pci_dev *dev) 1590 { 1591 struct icom_adapter *icom_adapter; 1592 struct list_head *tmp; 1593 1594 list_for_each(tmp, &icom_adapter_head) { 1595 icom_adapter = list_entry(tmp, struct icom_adapter, 1596 icom_adapter_entry); 1597 if (icom_adapter->pci_dev == dev) { 1598 kref_put(&icom_adapter->kref, icom_kref_release); 1599 return; 1600 } 1601 } 1602 1603 dev_err(&dev->dev, "Unable to find device to remove\n"); 1604 } 1605 1606 static struct pci_driver icom_pci_driver = { 1607 .name = ICOM_DRIVER_NAME, 1608 .id_table = icom_pci_table, 1609 .probe = icom_probe, 1610 .remove = icom_remove, 1611 }; 1612 1613 static int __init icom_init(void) 1614 { 1615 int ret; 1616 1617 ret = uart_register_driver(&icom_uart_driver); 1618 if (ret) 1619 return ret; 1620 1621 ret = pci_register_driver(&icom_pci_driver); 1622 1623 if (ret < 0) 1624 uart_unregister_driver(&icom_uart_driver); 1625 1626 return ret; 1627 } 1628 1629 static void __exit icom_exit(void) 1630 { 1631 pci_unregister_driver(&icom_pci_driver); 1632 uart_unregister_driver(&icom_uart_driver); 1633 } 1634 1635 module_init(icom_init); 1636 module_exit(icom_exit); 1637 1638 MODULE_AUTHOR("Michael Anderson <mjanders@us.ibm.com>"); 1639 MODULE_DESCRIPTION("IBM iSeries Serial IOA driver"); 1640 MODULE_LICENSE("GPL"); 1641 MODULE_FIRMWARE("icom_call_setup.bin"); 1642 MODULE_FIRMWARE("icom_res_dce.bin"); 1643 MODULE_FIRMWARE("icom_asc.bin"); 1644