1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * icom.c 4 * 5 * Copyright (C) 2001 IBM Corporation. All rights reserved. 6 * 7 * Serial device driver. 8 * 9 * Based on code from serial.c 10 */ 11 #include <linux/module.h> 12 #include <linux/kernel.h> 13 #include <linux/errno.h> 14 #include <linux/signal.h> 15 #include <linux/timer.h> 16 #include <linux/interrupt.h> 17 #include <linux/tty.h> 18 #include <linux/termios.h> 19 #include <linux/fs.h> 20 #include <linux/tty_flip.h> 21 #include <linux/serial.h> 22 #include <linux/serial_reg.h> 23 #include <linux/major.h> 24 #include <linux/string.h> 25 #include <linux/fcntl.h> 26 #include <linux/ptrace.h> 27 #include <linux/ioport.h> 28 #include <linux/mm.h> 29 #include <linux/slab.h> 30 #include <linux/init.h> 31 #include <linux/delay.h> 32 #include <linux/pci.h> 33 #include <linux/vmalloc.h> 34 #include <linux/smp.h> 35 #include <linux/spinlock.h> 36 #include <linux/kref.h> 37 #include <linux/firmware.h> 38 #include <linux/bitops.h> 39 40 #include <asm/io.h> 41 #include <asm/irq.h> 42 #include <linux/uaccess.h> 43 44 #include "icom.h" 45 46 /*#define ICOM_TRACE enable port trace capabilities */ 47 48 #define ICOM_DRIVER_NAME "icom" 49 #define ICOM_VERSION_STR "1.3.1" 50 #define NR_PORTS 128 51 #define ICOM_PORT ((struct icom_port *)port) 52 #define to_icom_adapter(d) container_of(d, struct icom_adapter, kref) 53 54 static const struct pci_device_id icom_pci_table[] = { 55 { 56 .vendor = PCI_VENDOR_ID_IBM, 57 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1, 58 .subvendor = PCI_ANY_ID, 59 .subdevice = PCI_ANY_ID, 60 .driver_data = ADAPTER_V1, 61 }, 62 { 63 .vendor = PCI_VENDOR_ID_IBM, 64 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 65 .subvendor = PCI_VENDOR_ID_IBM, 66 .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX, 67 .driver_data = ADAPTER_V2, 68 }, 69 { 70 .vendor = PCI_VENDOR_ID_IBM, 71 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 72 .subvendor = PCI_VENDOR_ID_IBM, 73 .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM, 74 .driver_data = ADAPTER_V2, 75 }, 76 { 77 .vendor = PCI_VENDOR_ID_IBM, 78 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 79 .subvendor = PCI_VENDOR_ID_IBM, 80 .subdevice = PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL, 81 .driver_data = ADAPTER_V2, 82 }, 83 { 84 .vendor = PCI_VENDOR_ID_IBM, 85 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 86 .subvendor = PCI_VENDOR_ID_IBM, 87 .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE, 88 .driver_data = ADAPTER_V2, 89 }, 90 {} 91 }; 92 93 static struct lookup_proc_table start_proc[4] = { 94 {NULL, ICOM_CONTROL_START_A}, 95 {NULL, ICOM_CONTROL_START_B}, 96 {NULL, ICOM_CONTROL_START_C}, 97 {NULL, ICOM_CONTROL_START_D} 98 }; 99 100 101 static struct lookup_proc_table stop_proc[4] = { 102 {NULL, ICOM_CONTROL_STOP_A}, 103 {NULL, ICOM_CONTROL_STOP_B}, 104 {NULL, ICOM_CONTROL_STOP_C}, 105 {NULL, ICOM_CONTROL_STOP_D} 106 }; 107 108 static struct lookup_int_table int_mask_tbl[4] = { 109 {NULL, ICOM_INT_MASK_PRC_A}, 110 {NULL, ICOM_INT_MASK_PRC_B}, 111 {NULL, ICOM_INT_MASK_PRC_C}, 112 {NULL, ICOM_INT_MASK_PRC_D}, 113 }; 114 115 116 MODULE_DEVICE_TABLE(pci, icom_pci_table); 117 118 static LIST_HEAD(icom_adapter_head); 119 120 /* spinlock for adapter initialization and changing adapter operations */ 121 static DEFINE_SPINLOCK(icom_lock); 122 123 #ifdef ICOM_TRACE 124 static inline void trace(struct icom_port *icom_port, char *trace_pt, 125 unsigned long trace_data) 126 { 127 dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n", 128 icom_port->port, trace_pt, trace_data); 129 } 130 #else 131 static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {}; 132 #endif 133 static void icom_kref_release(struct kref *kref); 134 135 static void free_port_memory(struct icom_port *icom_port) 136 { 137 struct pci_dev *dev = icom_port->adapter->pci_dev; 138 139 trace(icom_port, "RET_PORT_MEM", 0); 140 if (icom_port->recv_buf) { 141 dma_free_coherent(&dev->dev, 4096, icom_port->recv_buf, 142 icom_port->recv_buf_pci); 143 icom_port->recv_buf = NULL; 144 } 145 if (icom_port->xmit_buf) { 146 dma_free_coherent(&dev->dev, 4096, icom_port->xmit_buf, 147 icom_port->xmit_buf_pci); 148 icom_port->xmit_buf = NULL; 149 } 150 if (icom_port->statStg) { 151 dma_free_coherent(&dev->dev, 4096, icom_port->statStg, 152 icom_port->statStg_pci); 153 icom_port->statStg = NULL; 154 } 155 156 if (icom_port->xmitRestart) { 157 dma_free_coherent(&dev->dev, 4096, icom_port->xmitRestart, 158 icom_port->xmitRestart_pci); 159 icom_port->xmitRestart = NULL; 160 } 161 } 162 163 static int get_port_memory(struct icom_port *icom_port) 164 { 165 int index; 166 unsigned long stgAddr; 167 unsigned long startStgAddr; 168 unsigned long offset; 169 struct pci_dev *dev = icom_port->adapter->pci_dev; 170 171 icom_port->xmit_buf = 172 dma_alloc_coherent(&dev->dev, 4096, &icom_port->xmit_buf_pci, 173 GFP_KERNEL); 174 if (!icom_port->xmit_buf) { 175 dev_err(&dev->dev, "Can not allocate Transmit buffer\n"); 176 return -ENOMEM; 177 } 178 179 trace(icom_port, "GET_PORT_MEM", 180 (unsigned long) icom_port->xmit_buf); 181 182 icom_port->recv_buf = 183 dma_alloc_coherent(&dev->dev, 4096, &icom_port->recv_buf_pci, 184 GFP_KERNEL); 185 if (!icom_port->recv_buf) { 186 dev_err(&dev->dev, "Can not allocate Receive buffer\n"); 187 free_port_memory(icom_port); 188 return -ENOMEM; 189 } 190 trace(icom_port, "GET_PORT_MEM", 191 (unsigned long) icom_port->recv_buf); 192 193 icom_port->statStg = 194 dma_alloc_coherent(&dev->dev, 4096, &icom_port->statStg_pci, 195 GFP_KERNEL); 196 if (!icom_port->statStg) { 197 dev_err(&dev->dev, "Can not allocate Status buffer\n"); 198 free_port_memory(icom_port); 199 return -ENOMEM; 200 } 201 trace(icom_port, "GET_PORT_MEM", 202 (unsigned long) icom_port->statStg); 203 204 icom_port->xmitRestart = 205 dma_alloc_coherent(&dev->dev, 4096, &icom_port->xmitRestart_pci, 206 GFP_KERNEL); 207 if (!icom_port->xmitRestart) { 208 dev_err(&dev->dev, 209 "Can not allocate xmit Restart buffer\n"); 210 free_port_memory(icom_port); 211 return -ENOMEM; 212 } 213 214 /* FODs: Frame Out Descriptor Queue, this is a FIFO queue that 215 indicates that frames are to be transmitted 216 */ 217 218 stgAddr = (unsigned long) icom_port->statStg; 219 for (index = 0; index < NUM_XBUFFS; index++) { 220 trace(icom_port, "FOD_ADDR", stgAddr); 221 stgAddr = stgAddr + sizeof(icom_port->statStg->xmit[0]); 222 if (index < (NUM_XBUFFS - 1)) { 223 memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); 224 icom_port->statStg->xmit[index].leLengthASD = 225 (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); 226 trace(icom_port, "FOD_ADDR", stgAddr); 227 trace(icom_port, "FOD_XBUFF", 228 (unsigned long) icom_port->xmit_buf); 229 icom_port->statStg->xmit[index].leBuffer = 230 cpu_to_le32(icom_port->xmit_buf_pci); 231 } else if (index == (NUM_XBUFFS - 1)) { 232 memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); 233 icom_port->statStg->xmit[index].leLengthASD = 234 (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); 235 trace(icom_port, "FOD_XBUFF", 236 (unsigned long) icom_port->xmit_buf); 237 icom_port->statStg->xmit[index].leBuffer = 238 cpu_to_le32(icom_port->xmit_buf_pci); 239 } else { 240 memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); 241 } 242 } 243 /* FIDs */ 244 startStgAddr = stgAddr; 245 246 /* fill in every entry, even if no buffer */ 247 for (index = 0; index < NUM_RBUFFS; index++) { 248 trace(icom_port, "FID_ADDR", stgAddr); 249 stgAddr = stgAddr + sizeof(icom_port->statStg->rcv[0]); 250 icom_port->statStg->rcv[index].leLength = 0; 251 icom_port->statStg->rcv[index].WorkingLength = 252 (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); 253 if (index < (NUM_RBUFFS - 1) ) { 254 offset = stgAddr - (unsigned long) icom_port->statStg; 255 icom_port->statStg->rcv[index].leNext = 256 cpu_to_le32(icom_port-> statStg_pci + offset); 257 trace(icom_port, "FID_RBUFF", 258 (unsigned long) icom_port->recv_buf); 259 icom_port->statStg->rcv[index].leBuffer = 260 cpu_to_le32(icom_port->recv_buf_pci); 261 } else if (index == (NUM_RBUFFS -1) ) { 262 offset = startStgAddr - (unsigned long) icom_port->statStg; 263 icom_port->statStg->rcv[index].leNext = 264 cpu_to_le32(icom_port-> statStg_pci + offset); 265 trace(icom_port, "FID_RBUFF", 266 (unsigned long) icom_port->recv_buf + 2048); 267 icom_port->statStg->rcv[index].leBuffer = 268 cpu_to_le32(icom_port->recv_buf_pci + 2048); 269 } else { 270 icom_port->statStg->rcv[index].leNext = 0; 271 icom_port->statStg->rcv[index].leBuffer = 0; 272 } 273 } 274 275 return 0; 276 } 277 278 static void stop_processor(struct icom_port *icom_port) 279 { 280 unsigned long temp; 281 unsigned long flags; 282 int port; 283 284 spin_lock_irqsave(&icom_lock, flags); 285 286 port = icom_port->port; 287 if (port >= ARRAY_SIZE(stop_proc)) { 288 dev_err(&icom_port->adapter->pci_dev->dev, 289 "Invalid port assignment\n"); 290 goto unlock; 291 } 292 293 if (port == 0 || port == 1) 294 stop_proc[port].global_control_reg = &icom_port->global_reg->control; 295 else 296 stop_proc[port].global_control_reg = &icom_port->global_reg->control_2; 297 298 temp = readl(stop_proc[port].global_control_reg); 299 temp = (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id; 300 writel(temp, stop_proc[port].global_control_reg); 301 302 /* write flush */ 303 readl(stop_proc[port].global_control_reg); 304 305 unlock: 306 spin_unlock_irqrestore(&icom_lock, flags); 307 } 308 309 static void start_processor(struct icom_port *icom_port) 310 { 311 unsigned long temp; 312 unsigned long flags; 313 int port; 314 315 spin_lock_irqsave(&icom_lock, flags); 316 317 port = icom_port->port; 318 if (port >= ARRAY_SIZE(start_proc)) { 319 dev_err(&icom_port->adapter->pci_dev->dev, 320 "Invalid port assignment\n"); 321 goto unlock; 322 } 323 324 if (port == 0 || port == 1) 325 start_proc[port].global_control_reg = &icom_port->global_reg->control; 326 else 327 start_proc[port].global_control_reg = &icom_port->global_reg->control_2; 328 329 temp = readl(start_proc[port].global_control_reg); 330 temp = (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id; 331 writel(temp, start_proc[port].global_control_reg); 332 333 /* write flush */ 334 readl(start_proc[port].global_control_reg); 335 336 unlock: 337 spin_unlock_irqrestore(&icom_lock, flags); 338 } 339 340 static void load_code(struct icom_port *icom_port) 341 { 342 const struct firmware *fw; 343 char __iomem *iram_ptr; 344 int index; 345 int status = 0; 346 void __iomem *dram_ptr = icom_port->dram; 347 dma_addr_t temp_pci; 348 unsigned char *new_page = NULL; 349 unsigned char cable_id = NO_CABLE; 350 struct pci_dev *dev = icom_port->adapter->pci_dev; 351 352 /* Clear out any pending interrupts */ 353 writew(0x3FFF, icom_port->int_reg); 354 355 trace(icom_port, "CLEAR_INTERRUPTS", 0); 356 357 /* Stop processor */ 358 stop_processor(icom_port); 359 360 /* Zero out DRAM */ 361 memset_io(dram_ptr, 0, 512); 362 363 /* Load Call Setup into Adapter */ 364 if (request_firmware(&fw, "icom_call_setup.bin", &dev->dev) < 0) { 365 dev_err(&dev->dev,"Unable to load icom_call_setup.bin firmware image\n"); 366 status = -1; 367 goto load_code_exit; 368 } 369 370 if (fw->size > ICOM_DCE_IRAM_OFFSET) { 371 dev_err(&dev->dev, "Invalid firmware image for icom_call_setup.bin found.\n"); 372 release_firmware(fw); 373 status = -1; 374 goto load_code_exit; 375 } 376 377 iram_ptr = (char __iomem *)icom_port->dram + ICOM_IRAM_OFFSET; 378 for (index = 0; index < fw->size; index++) 379 writeb(fw->data[index], &iram_ptr[index]); 380 381 release_firmware(fw); 382 383 /* Load Resident DCE portion of Adapter */ 384 if (request_firmware(&fw, "icom_res_dce.bin", &dev->dev) < 0) { 385 dev_err(&dev->dev,"Unable to load icom_res_dce.bin firmware image\n"); 386 status = -1; 387 goto load_code_exit; 388 } 389 390 if (fw->size > ICOM_IRAM_SIZE) { 391 dev_err(&dev->dev, "Invalid firmware image for icom_res_dce.bin found.\n"); 392 release_firmware(fw); 393 status = -1; 394 goto load_code_exit; 395 } 396 397 iram_ptr = (char __iomem *) icom_port->dram + ICOM_IRAM_OFFSET; 398 for (index = ICOM_DCE_IRAM_OFFSET; index < fw->size; index++) 399 writeb(fw->data[index], &iram_ptr[index]); 400 401 release_firmware(fw); 402 403 /* Set Hardware level */ 404 if (icom_port->adapter->version == ADAPTER_V2) 405 writeb(V2_HARDWARE, &(icom_port->dram->misc_flags)); 406 407 /* Start the processor in Adapter */ 408 start_processor(icom_port); 409 410 writeb((HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL), 411 &(icom_port->dram->HDLCConfigReg)); 412 writeb(0x04, &(icom_port->dram->FlagFillIdleTimer)); /* 0.5 seconds */ 413 writeb(0x00, &(icom_port->dram->CmdReg)); 414 writeb(0x10, &(icom_port->dram->async_config3)); 415 writeb((ICOM_ACFG_DRIVE1 | ICOM_ACFG_NO_PARITY | ICOM_ACFG_8BPC | 416 ICOM_ACFG_1STOP_BIT), &(icom_port->dram->async_config2)); 417 418 /*Set up data in icom DRAM to indicate where personality 419 *code is located and its length. 420 */ 421 new_page = dma_alloc_coherent(&dev->dev, 4096, &temp_pci, GFP_KERNEL); 422 423 if (!new_page) { 424 dev_err(&dev->dev, "Can not allocate DMA buffer\n"); 425 status = -1; 426 goto load_code_exit; 427 } 428 429 if (request_firmware(&fw, "icom_asc.bin", &dev->dev) < 0) { 430 dev_err(&dev->dev,"Unable to load icom_asc.bin firmware image\n"); 431 status = -1; 432 goto load_code_exit; 433 } 434 435 if (fw->size > ICOM_DCE_IRAM_OFFSET) { 436 dev_err(&dev->dev, "Invalid firmware image for icom_asc.bin found.\n"); 437 release_firmware(fw); 438 status = -1; 439 goto load_code_exit; 440 } 441 442 for (index = 0; index < fw->size; index++) 443 new_page[index] = fw->data[index]; 444 445 writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length); 446 writel(temp_pci, &icom_port->dram->mac_load_addr); 447 448 release_firmware(fw); 449 450 /*Setting the syncReg to 0x80 causes adapter to start downloading 451 the personality code into adapter instruction RAM. 452 Once code is loaded, it will begin executing and, based on 453 information provided above, will start DMAing data from 454 shared memory to adapter DRAM. 455 */ 456 /* the wait loop below verifies this write operation has been done 457 and processed 458 */ 459 writeb(START_DOWNLOAD, &icom_port->dram->sync); 460 461 /* Wait max 1 Sec for data download and processor to start */ 462 for (index = 0; index < 10; index++) { 463 msleep(100); 464 if (readb(&icom_port->dram->misc_flags) & ICOM_HDW_ACTIVE) 465 break; 466 } 467 468 if (index == 10) 469 status = -1; 470 471 /* 472 * check Cable ID 473 */ 474 cable_id = readb(&icom_port->dram->cable_id); 475 476 if (cable_id & ICOM_CABLE_ID_VALID) { 477 /* Get cable ID into the lower 4 bits (standard form) */ 478 cable_id = (cable_id & ICOM_CABLE_ID_MASK) >> 4; 479 icom_port->cable_id = cable_id; 480 } else { 481 dev_err(&dev->dev,"Invalid or no cable attached\n"); 482 icom_port->cable_id = NO_CABLE; 483 } 484 485 load_code_exit: 486 487 if (status != 0) { 488 /* Clear out any pending interrupts */ 489 writew(0x3FFF, icom_port->int_reg); 490 491 /* Turn off port */ 492 writeb(ICOM_DISABLE, &(icom_port->dram->disable)); 493 494 /* Stop processor */ 495 stop_processor(icom_port); 496 497 dev_err(&icom_port->adapter->pci_dev->dev,"Port not operational\n"); 498 } 499 500 if (new_page != NULL) 501 dma_free_coherent(&dev->dev, 4096, new_page, temp_pci); 502 } 503 504 static int startup(struct icom_port *icom_port) 505 { 506 unsigned long temp; 507 unsigned char cable_id, raw_cable_id; 508 unsigned long flags; 509 int port; 510 511 trace(icom_port, "STARTUP", 0); 512 513 if (!icom_port->dram) { 514 /* should NEVER be NULL */ 515 dev_err(&icom_port->adapter->pci_dev->dev, 516 "Unusable Port, port configuration missing\n"); 517 return -ENODEV; 518 } 519 520 /* 521 * check Cable ID 522 */ 523 raw_cable_id = readb(&icom_port->dram->cable_id); 524 trace(icom_port, "CABLE_ID", raw_cable_id); 525 526 /* Get cable ID into the lower 4 bits (standard form) */ 527 cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; 528 529 /* Check for valid Cable ID */ 530 if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || 531 (cable_id != icom_port->cable_id)) { 532 533 /* reload adapter code, pick up any potential changes in cable id */ 534 load_code(icom_port); 535 536 /* still no sign of cable, error out */ 537 raw_cable_id = readb(&icom_port->dram->cable_id); 538 cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; 539 if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || 540 (icom_port->cable_id == NO_CABLE)) 541 return -EIO; 542 } 543 544 /* 545 * Finally, clear and enable interrupts 546 */ 547 spin_lock_irqsave(&icom_lock, flags); 548 port = icom_port->port; 549 if (port >= ARRAY_SIZE(int_mask_tbl)) { 550 dev_err(&icom_port->adapter->pci_dev->dev, 551 "Invalid port assignment\n"); 552 goto unlock; 553 } 554 555 if (port == 0 || port == 1) 556 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; 557 else 558 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; 559 560 if (port == 0 || port == 2) 561 writew(0x00FF, icom_port->int_reg); 562 else 563 writew(0x3F00, icom_port->int_reg); 564 565 temp = readl(int_mask_tbl[port].global_int_mask); 566 writel(temp & ~int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); 567 568 /* write flush */ 569 readl(int_mask_tbl[port].global_int_mask); 570 571 unlock: 572 spin_unlock_irqrestore(&icom_lock, flags); 573 return 0; 574 } 575 576 static void shutdown(struct icom_port *icom_port) 577 { 578 unsigned long temp; 579 unsigned char cmdReg; 580 unsigned long flags; 581 int port; 582 583 spin_lock_irqsave(&icom_lock, flags); 584 trace(icom_port, "SHUTDOWN", 0); 585 586 /* 587 * disable all interrupts 588 */ 589 port = icom_port->port; 590 if (port >= ARRAY_SIZE(int_mask_tbl)) { 591 dev_err(&icom_port->adapter->pci_dev->dev, 592 "Invalid port assignment\n"); 593 goto unlock; 594 } 595 if (port == 0 || port == 1) 596 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; 597 else 598 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; 599 600 temp = readl(int_mask_tbl[port].global_int_mask); 601 writel(temp | int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); 602 603 /* write flush */ 604 readl(int_mask_tbl[port].global_int_mask); 605 606 unlock: 607 spin_unlock_irqrestore(&icom_lock, flags); 608 609 /* 610 * disable break condition 611 */ 612 cmdReg = readb(&icom_port->dram->CmdReg); 613 if (cmdReg & CMD_SND_BREAK) { 614 writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg); 615 } 616 } 617 618 static int icom_write(struct uart_port *port) 619 { 620 unsigned long data_count; 621 unsigned char cmdReg; 622 unsigned long offset; 623 int temp_tail = port->state->xmit.tail; 624 625 trace(ICOM_PORT, "WRITE", 0); 626 627 if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & 628 SA_FLAGS_READY_TO_XMIT) { 629 trace(ICOM_PORT, "WRITE_FULL", 0); 630 return 0; 631 } 632 633 data_count = 0; 634 while ((port->state->xmit.head != temp_tail) && 635 (data_count <= XMIT_BUFF_SZ)) { 636 637 ICOM_PORT->xmit_buf[data_count++] = 638 port->state->xmit.buf[temp_tail]; 639 640 temp_tail++; 641 temp_tail &= (UART_XMIT_SIZE - 1); 642 } 643 644 if (data_count) { 645 ICOM_PORT->statStg->xmit[0].flags = 646 cpu_to_le16(SA_FLAGS_READY_TO_XMIT); 647 ICOM_PORT->statStg->xmit[0].leLength = 648 cpu_to_le16(data_count); 649 offset = 650 (unsigned long) &ICOM_PORT->statStg->xmit[0] - 651 (unsigned long) ICOM_PORT->statStg; 652 *ICOM_PORT->xmitRestart = 653 cpu_to_le32(ICOM_PORT->statStg_pci + offset); 654 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 655 writeb(cmdReg | CMD_XMIT_RCV_ENABLE, 656 &ICOM_PORT->dram->CmdReg); 657 writeb(START_XMIT, &ICOM_PORT->dram->StartXmitCmd); 658 trace(ICOM_PORT, "WRITE_START", data_count); 659 /* write flush */ 660 readb(&ICOM_PORT->dram->StartXmitCmd); 661 } 662 663 return data_count; 664 } 665 666 static inline void check_modem_status(struct icom_port *icom_port) 667 { 668 static char old_status = 0; 669 char delta_status; 670 unsigned char status; 671 672 spin_lock(&icom_port->uart_port.lock); 673 674 /*modem input register */ 675 status = readb(&icom_port->dram->isr); 676 trace(icom_port, "CHECK_MODEM", status); 677 delta_status = status ^ old_status; 678 if (delta_status) { 679 if (delta_status & ICOM_RI) 680 icom_port->uart_port.icount.rng++; 681 if (delta_status & ICOM_DSR) 682 icom_port->uart_port.icount.dsr++; 683 if (delta_status & ICOM_DCD) 684 uart_handle_dcd_change(&icom_port->uart_port, 685 delta_status & ICOM_DCD); 686 if (delta_status & ICOM_CTS) 687 uart_handle_cts_change(&icom_port->uart_port, 688 delta_status & ICOM_CTS); 689 690 wake_up_interruptible(&icom_port->uart_port.state-> 691 port.delta_msr_wait); 692 old_status = status; 693 } 694 spin_unlock(&icom_port->uart_port.lock); 695 } 696 697 static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port) 698 { 699 unsigned short int count; 700 int i; 701 702 if (port_int_reg & (INT_XMIT_COMPLETED)) { 703 trace(icom_port, "XMIT_COMPLETE", 0); 704 705 /* clear buffer in use bit */ 706 icom_port->statStg->xmit[0].flags &= 707 cpu_to_le16(~SA_FLAGS_READY_TO_XMIT); 708 709 count = (unsigned short int) 710 cpu_to_le16(icom_port->statStg->xmit[0].leLength); 711 icom_port->uart_port.icount.tx += count; 712 713 for (i=0; i<count && 714 !uart_circ_empty(&icom_port->uart_port.state->xmit); i++) { 715 716 icom_port->uart_port.state->xmit.tail++; 717 icom_port->uart_port.state->xmit.tail &= 718 (UART_XMIT_SIZE - 1); 719 } 720 721 if (!icom_write(&icom_port->uart_port)) 722 /* activate write queue */ 723 uart_write_wakeup(&icom_port->uart_port); 724 } else 725 trace(icom_port, "XMIT_DISABLED", 0); 726 } 727 728 static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port) 729 { 730 short int count, rcv_buff; 731 struct tty_port *port = &icom_port->uart_port.state->port; 732 unsigned short int status; 733 struct uart_icount *icount; 734 unsigned long offset; 735 unsigned char flag; 736 737 trace(icom_port, "RCV_COMPLETE", 0); 738 rcv_buff = icom_port->next_rcv; 739 740 status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); 741 while (status & SA_FL_RCV_DONE) { 742 int first = -1; 743 744 trace(icom_port, "FID_STATUS", status); 745 count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength); 746 747 trace(icom_port, "RCV_COUNT", count); 748 749 trace(icom_port, "REAL_COUNT", count); 750 751 offset = 752 cpu_to_le32(icom_port->statStg->rcv[rcv_buff].leBuffer) - 753 icom_port->recv_buf_pci; 754 755 /* Block copy all but the last byte as this may have status */ 756 if (count > 0) { 757 first = icom_port->recv_buf[offset]; 758 tty_insert_flip_string(port, icom_port->recv_buf + offset, count - 1); 759 } 760 761 icount = &icom_port->uart_port.icount; 762 icount->rx += count; 763 764 /* Break detect logic */ 765 if ((status & SA_FLAGS_FRAME_ERROR) 766 && first == 0) { 767 status &= ~SA_FLAGS_FRAME_ERROR; 768 status |= SA_FLAGS_BREAK_DET; 769 trace(icom_port, "BREAK_DET", 0); 770 } 771 772 flag = TTY_NORMAL; 773 774 if (status & 775 (SA_FLAGS_BREAK_DET | SA_FLAGS_PARITY_ERROR | 776 SA_FLAGS_FRAME_ERROR | SA_FLAGS_OVERRUN)) { 777 778 if (status & SA_FLAGS_BREAK_DET) 779 icount->brk++; 780 if (status & SA_FLAGS_PARITY_ERROR) 781 icount->parity++; 782 if (status & SA_FLAGS_FRAME_ERROR) 783 icount->frame++; 784 if (status & SA_FLAGS_OVERRUN) 785 icount->overrun++; 786 787 /* 788 * Now check to see if character should be 789 * ignored, and mask off conditions which 790 * should be ignored. 791 */ 792 if (status & icom_port->ignore_status_mask) { 793 trace(icom_port, "IGNORE_CHAR", 0); 794 goto ignore_char; 795 } 796 797 status &= icom_port->read_status_mask; 798 799 if (status & SA_FLAGS_BREAK_DET) { 800 flag = TTY_BREAK; 801 } else if (status & SA_FLAGS_PARITY_ERROR) { 802 trace(icom_port, "PARITY_ERROR", 0); 803 flag = TTY_PARITY; 804 } else if (status & SA_FLAGS_FRAME_ERROR) 805 flag = TTY_FRAME; 806 807 } 808 809 tty_insert_flip_char(port, *(icom_port->recv_buf + offset + count - 1), flag); 810 811 if (status & SA_FLAGS_OVERRUN) 812 /* 813 * Overrun is special, since it's 814 * reported immediately, and doesn't 815 * affect the current character 816 */ 817 tty_insert_flip_char(port, 0, TTY_OVERRUN); 818 ignore_char: 819 icom_port->statStg->rcv[rcv_buff].flags = 0; 820 icom_port->statStg->rcv[rcv_buff].leLength = 0; 821 icom_port->statStg->rcv[rcv_buff].WorkingLength = 822 (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); 823 824 rcv_buff++; 825 if (rcv_buff == NUM_RBUFFS) 826 rcv_buff = 0; 827 828 status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); 829 } 830 icom_port->next_rcv = rcv_buff; 831 832 spin_unlock(&icom_port->uart_port.lock); 833 tty_flip_buffer_push(port); 834 spin_lock(&icom_port->uart_port.lock); 835 } 836 837 static void process_interrupt(u16 port_int_reg, 838 struct icom_port *icom_port) 839 { 840 841 spin_lock(&icom_port->uart_port.lock); 842 trace(icom_port, "INTERRUPT", port_int_reg); 843 844 if (port_int_reg & (INT_XMIT_COMPLETED | INT_XMIT_DISABLED)) 845 xmit_interrupt(port_int_reg, icom_port); 846 847 if (port_int_reg & INT_RCV_COMPLETED) 848 recv_interrupt(port_int_reg, icom_port); 849 850 spin_unlock(&icom_port->uart_port.lock); 851 } 852 853 static irqreturn_t icom_interrupt(int irq, void *dev_id) 854 { 855 void __iomem * int_reg; 856 u32 adapter_interrupts; 857 u16 port_int_reg; 858 struct icom_adapter *icom_adapter; 859 struct icom_port *icom_port; 860 861 /* find icom_port for this interrupt */ 862 icom_adapter = (struct icom_adapter *) dev_id; 863 864 if (icom_adapter->version == ADAPTER_V2) { 865 int_reg = icom_adapter->base_addr + 0x8024; 866 867 adapter_interrupts = readl(int_reg); 868 869 if (adapter_interrupts & 0x00003FFF) { 870 /* port 2 interrupt, NOTE: for all ADAPTER_V2, port 2 will be active */ 871 icom_port = &icom_adapter->port_info[2]; 872 port_int_reg = (u16) adapter_interrupts; 873 process_interrupt(port_int_reg, icom_port); 874 check_modem_status(icom_port); 875 } 876 if (adapter_interrupts & 0x3FFF0000) { 877 /* port 3 interrupt */ 878 icom_port = &icom_adapter->port_info[3]; 879 if (icom_port->status == ICOM_PORT_ACTIVE) { 880 port_int_reg = 881 (u16) (adapter_interrupts >> 16); 882 process_interrupt(port_int_reg, icom_port); 883 check_modem_status(icom_port); 884 } 885 } 886 887 /* Clear out any pending interrupts */ 888 writel(adapter_interrupts, int_reg); 889 890 int_reg = icom_adapter->base_addr + 0x8004; 891 } else { 892 int_reg = icom_adapter->base_addr + 0x4004; 893 } 894 895 adapter_interrupts = readl(int_reg); 896 897 if (adapter_interrupts & 0x00003FFF) { 898 /* port 0 interrupt, NOTE: for all adapters, port 0 will be active */ 899 icom_port = &icom_adapter->port_info[0]; 900 port_int_reg = (u16) adapter_interrupts; 901 process_interrupt(port_int_reg, icom_port); 902 check_modem_status(icom_port); 903 } 904 if (adapter_interrupts & 0x3FFF0000) { 905 /* port 1 interrupt */ 906 icom_port = &icom_adapter->port_info[1]; 907 if (icom_port->status == ICOM_PORT_ACTIVE) { 908 port_int_reg = (u16) (adapter_interrupts >> 16); 909 process_interrupt(port_int_reg, icom_port); 910 check_modem_status(icom_port); 911 } 912 } 913 914 /* Clear out any pending interrupts */ 915 writel(adapter_interrupts, int_reg); 916 917 /* flush the write */ 918 adapter_interrupts = readl(int_reg); 919 920 return IRQ_HANDLED; 921 } 922 923 /* 924 * ------------------------------------------------------------------ 925 * Begin serial-core API 926 * ------------------------------------------------------------------ 927 */ 928 static unsigned int icom_tx_empty(struct uart_port *port) 929 { 930 int ret; 931 unsigned long flags; 932 933 spin_lock_irqsave(&port->lock, flags); 934 if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & 935 SA_FLAGS_READY_TO_XMIT) 936 ret = TIOCSER_TEMT; 937 else 938 ret = 0; 939 940 spin_unlock_irqrestore(&port->lock, flags); 941 return ret; 942 } 943 944 static void icom_set_mctrl(struct uart_port *port, unsigned int mctrl) 945 { 946 unsigned char local_osr; 947 948 trace(ICOM_PORT, "SET_MODEM", 0); 949 local_osr = readb(&ICOM_PORT->dram->osr); 950 951 if (mctrl & TIOCM_RTS) { 952 trace(ICOM_PORT, "RAISE_RTS", 0); 953 local_osr |= ICOM_RTS; 954 } else { 955 trace(ICOM_PORT, "LOWER_RTS", 0); 956 local_osr &= ~ICOM_RTS; 957 } 958 959 if (mctrl & TIOCM_DTR) { 960 trace(ICOM_PORT, "RAISE_DTR", 0); 961 local_osr |= ICOM_DTR; 962 } else { 963 trace(ICOM_PORT, "LOWER_DTR", 0); 964 local_osr &= ~ICOM_DTR; 965 } 966 967 writeb(local_osr, &ICOM_PORT->dram->osr); 968 } 969 970 static unsigned int icom_get_mctrl(struct uart_port *port) 971 { 972 unsigned char status; 973 unsigned int result; 974 975 trace(ICOM_PORT, "GET_MODEM", 0); 976 977 status = readb(&ICOM_PORT->dram->isr); 978 979 result = ((status & ICOM_DCD) ? TIOCM_CAR : 0) 980 | ((status & ICOM_RI) ? TIOCM_RNG : 0) 981 | ((status & ICOM_DSR) ? TIOCM_DSR : 0) 982 | ((status & ICOM_CTS) ? TIOCM_CTS : 0); 983 return result; 984 } 985 986 static void icom_stop_tx(struct uart_port *port) 987 { 988 unsigned char cmdReg; 989 990 trace(ICOM_PORT, "STOP", 0); 991 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 992 writeb(cmdReg | CMD_HOLD_XMIT, &ICOM_PORT->dram->CmdReg); 993 } 994 995 static void icom_start_tx(struct uart_port *port) 996 { 997 unsigned char cmdReg; 998 999 trace(ICOM_PORT, "START", 0); 1000 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 1001 if ((cmdReg & CMD_HOLD_XMIT) == CMD_HOLD_XMIT) 1002 writeb(cmdReg & ~CMD_HOLD_XMIT, 1003 &ICOM_PORT->dram->CmdReg); 1004 1005 icom_write(port); 1006 } 1007 1008 static void icom_send_xchar(struct uart_port *port, char ch) 1009 { 1010 unsigned char xdata; 1011 int index; 1012 unsigned long flags; 1013 1014 trace(ICOM_PORT, "SEND_XCHAR", ch); 1015 1016 /* wait .1 sec to send char */ 1017 for (index = 0; index < 10; index++) { 1018 spin_lock_irqsave(&port->lock, flags); 1019 xdata = readb(&ICOM_PORT->dram->xchar); 1020 if (xdata == 0x00) { 1021 trace(ICOM_PORT, "QUICK_WRITE", 0); 1022 writeb(ch, &ICOM_PORT->dram->xchar); 1023 1024 /* flush write operation */ 1025 xdata = readb(&ICOM_PORT->dram->xchar); 1026 spin_unlock_irqrestore(&port->lock, flags); 1027 break; 1028 } 1029 spin_unlock_irqrestore(&port->lock, flags); 1030 msleep(10); 1031 } 1032 } 1033 1034 static void icom_stop_rx(struct uart_port *port) 1035 { 1036 unsigned char cmdReg; 1037 1038 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 1039 writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); 1040 } 1041 1042 static void icom_break(struct uart_port *port, int break_state) 1043 { 1044 unsigned char cmdReg; 1045 unsigned long flags; 1046 1047 spin_lock_irqsave(&port->lock, flags); 1048 trace(ICOM_PORT, "BREAK", 0); 1049 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 1050 if (break_state == -1) { 1051 writeb(cmdReg | CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); 1052 } else { 1053 writeb(cmdReg & ~CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); 1054 } 1055 spin_unlock_irqrestore(&port->lock, flags); 1056 } 1057 1058 static int icom_open(struct uart_port *port) 1059 { 1060 int retval; 1061 1062 kref_get(&ICOM_PORT->adapter->kref); 1063 retval = startup(ICOM_PORT); 1064 1065 if (retval) { 1066 kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); 1067 trace(ICOM_PORT, "STARTUP_ERROR", 0); 1068 return retval; 1069 } 1070 1071 return 0; 1072 } 1073 1074 static void icom_close(struct uart_port *port) 1075 { 1076 unsigned char cmdReg; 1077 1078 trace(ICOM_PORT, "CLOSE", 0); 1079 1080 /* stop receiver */ 1081 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 1082 writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); 1083 1084 shutdown(ICOM_PORT); 1085 1086 kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); 1087 } 1088 1089 static void icom_set_termios(struct uart_port *port, 1090 struct ktermios *termios, 1091 struct ktermios *old_termios) 1092 { 1093 int baud; 1094 unsigned cflag, iflag; 1095 char new_config2; 1096 char new_config3 = 0; 1097 char tmp_byte; 1098 int index; 1099 int rcv_buff, xmit_buff; 1100 unsigned long offset; 1101 unsigned long flags; 1102 1103 spin_lock_irqsave(&port->lock, flags); 1104 trace(ICOM_PORT, "CHANGE_SPEED", 0); 1105 1106 cflag = termios->c_cflag; 1107 iflag = termios->c_iflag; 1108 1109 new_config2 = ICOM_ACFG_DRIVE1; 1110 1111 /* byte size and parity */ 1112 switch (cflag & CSIZE) { 1113 case CS5: /* 5 bits/char */ 1114 new_config2 |= ICOM_ACFG_5BPC; 1115 break; 1116 case CS6: /* 6 bits/char */ 1117 new_config2 |= ICOM_ACFG_6BPC; 1118 break; 1119 case CS7: /* 7 bits/char */ 1120 new_config2 |= ICOM_ACFG_7BPC; 1121 break; 1122 case CS8: /* 8 bits/char */ 1123 new_config2 |= ICOM_ACFG_8BPC; 1124 break; 1125 default: 1126 break; 1127 } 1128 if (cflag & CSTOPB) { 1129 /* 2 stop bits */ 1130 new_config2 |= ICOM_ACFG_2STOP_BIT; 1131 } 1132 if (cflag & PARENB) { 1133 /* parity bit enabled */ 1134 new_config2 |= ICOM_ACFG_PARITY_ENAB; 1135 trace(ICOM_PORT, "PARENB", 0); 1136 } 1137 if (cflag & PARODD) { 1138 /* odd parity */ 1139 new_config2 |= ICOM_ACFG_PARITY_ODD; 1140 trace(ICOM_PORT, "PARODD", 0); 1141 } 1142 1143 /* Determine divisor based on baud rate */ 1144 baud = uart_get_baud_rate(port, termios, old_termios, 1145 icom_acfg_baud[0], 1146 icom_acfg_baud[BAUD_TABLE_LIMIT]); 1147 if (!baud) 1148 baud = 9600; /* B0 transition handled in rs_set_termios */ 1149 1150 for (index = 0; index < BAUD_TABLE_LIMIT; index++) { 1151 if (icom_acfg_baud[index] == baud) { 1152 new_config3 = index; 1153 break; 1154 } 1155 } 1156 1157 uart_update_timeout(port, cflag, baud); 1158 1159 /* CTS flow control flag and modem status interrupts */ 1160 tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); 1161 if (cflag & CRTSCTS) 1162 tmp_byte |= HDLC_HDW_FLOW; 1163 else 1164 tmp_byte &= ~HDLC_HDW_FLOW; 1165 writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); 1166 1167 /* 1168 * Set up parity check flag 1169 */ 1170 ICOM_PORT->read_status_mask = SA_FLAGS_OVERRUN | SA_FL_RCV_DONE; 1171 if (iflag & INPCK) 1172 ICOM_PORT->read_status_mask |= 1173 SA_FLAGS_FRAME_ERROR | SA_FLAGS_PARITY_ERROR; 1174 1175 if ((iflag & BRKINT) || (iflag & PARMRK)) 1176 ICOM_PORT->read_status_mask |= SA_FLAGS_BREAK_DET; 1177 1178 /* 1179 * Characters to ignore 1180 */ 1181 ICOM_PORT->ignore_status_mask = 0; 1182 if (iflag & IGNPAR) 1183 ICOM_PORT->ignore_status_mask |= 1184 SA_FLAGS_PARITY_ERROR | SA_FLAGS_FRAME_ERROR; 1185 if (iflag & IGNBRK) { 1186 ICOM_PORT->ignore_status_mask |= SA_FLAGS_BREAK_DET; 1187 /* 1188 * If we're ignore parity and break indicators, ignore 1189 * overruns too. (For real raw support). 1190 */ 1191 if (iflag & IGNPAR) 1192 ICOM_PORT->ignore_status_mask |= SA_FLAGS_OVERRUN; 1193 } 1194 1195 /* 1196 * !!! ignore all characters if CREAD is not set 1197 */ 1198 if ((cflag & CREAD) == 0) 1199 ICOM_PORT->ignore_status_mask |= SA_FL_RCV_DONE; 1200 1201 /* Turn off Receiver to prepare for reset */ 1202 writeb(CMD_RCV_DISABLE, &ICOM_PORT->dram->CmdReg); 1203 1204 for (index = 0; index < 10; index++) { 1205 if (readb(&ICOM_PORT->dram->PrevCmdReg) == 0x00) { 1206 break; 1207 } 1208 } 1209 1210 /* clear all current buffers of data */ 1211 for (rcv_buff = 0; rcv_buff < NUM_RBUFFS; rcv_buff++) { 1212 ICOM_PORT->statStg->rcv[rcv_buff].flags = 0; 1213 ICOM_PORT->statStg->rcv[rcv_buff].leLength = 0; 1214 ICOM_PORT->statStg->rcv[rcv_buff].WorkingLength = 1215 (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); 1216 } 1217 1218 for (xmit_buff = 0; xmit_buff < NUM_XBUFFS; xmit_buff++) { 1219 ICOM_PORT->statStg->xmit[xmit_buff].flags = 0; 1220 } 1221 1222 /* activate changes and start xmit and receiver here */ 1223 /* Enable the receiver */ 1224 writeb(new_config3, &(ICOM_PORT->dram->async_config3)); 1225 writeb(new_config2, &(ICOM_PORT->dram->async_config2)); 1226 tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); 1227 tmp_byte |= HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL; 1228 writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); 1229 writeb(0x04, &(ICOM_PORT->dram->FlagFillIdleTimer)); /* 0.5 seconds */ 1230 writeb(0xFF, &(ICOM_PORT->dram->ier)); /* enable modem signal interrupts */ 1231 1232 /* reset processor */ 1233 writeb(CMD_RESTART, &ICOM_PORT->dram->CmdReg); 1234 1235 for (index = 0; index < 10; index++) { 1236 if (readb(&ICOM_PORT->dram->CmdReg) == 0x00) { 1237 break; 1238 } 1239 } 1240 1241 /* Enable Transmitter and Receiver */ 1242 offset = 1243 (unsigned long) &ICOM_PORT->statStg->rcv[0] - 1244 (unsigned long) ICOM_PORT->statStg; 1245 writel(ICOM_PORT->statStg_pci + offset, 1246 &ICOM_PORT->dram->RcvStatusAddr); 1247 ICOM_PORT->next_rcv = 0; 1248 ICOM_PORT->put_length = 0; 1249 *ICOM_PORT->xmitRestart = 0; 1250 writel(ICOM_PORT->xmitRestart_pci, 1251 &ICOM_PORT->dram->XmitStatusAddr); 1252 trace(ICOM_PORT, "XR_ENAB", 0); 1253 writeb(CMD_XMIT_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); 1254 1255 spin_unlock_irqrestore(&port->lock, flags); 1256 } 1257 1258 static const char *icom_type(struct uart_port *port) 1259 { 1260 return "icom"; 1261 } 1262 1263 static void icom_release_port(struct uart_port *port) 1264 { 1265 } 1266 1267 static int icom_request_port(struct uart_port *port) 1268 { 1269 return 0; 1270 } 1271 1272 static void icom_config_port(struct uart_port *port, int flags) 1273 { 1274 port->type = PORT_ICOM; 1275 } 1276 1277 static const struct uart_ops icom_ops = { 1278 .tx_empty = icom_tx_empty, 1279 .set_mctrl = icom_set_mctrl, 1280 .get_mctrl = icom_get_mctrl, 1281 .stop_tx = icom_stop_tx, 1282 .start_tx = icom_start_tx, 1283 .send_xchar = icom_send_xchar, 1284 .stop_rx = icom_stop_rx, 1285 .break_ctl = icom_break, 1286 .startup = icom_open, 1287 .shutdown = icom_close, 1288 .set_termios = icom_set_termios, 1289 .type = icom_type, 1290 .release_port = icom_release_port, 1291 .request_port = icom_request_port, 1292 .config_port = icom_config_port, 1293 }; 1294 1295 #define ICOM_CONSOLE NULL 1296 1297 static struct uart_driver icom_uart_driver = { 1298 .owner = THIS_MODULE, 1299 .driver_name = ICOM_DRIVER_NAME, 1300 .dev_name = "ttyA", 1301 .major = ICOM_MAJOR, 1302 .minor = ICOM_MINOR_START, 1303 .nr = NR_PORTS, 1304 .cons = ICOM_CONSOLE, 1305 }; 1306 1307 static int icom_init_ports(struct icom_adapter *icom_adapter) 1308 { 1309 u32 subsystem_id = icom_adapter->subsystem_id; 1310 int i; 1311 struct icom_port *icom_port; 1312 1313 if (icom_adapter->version == ADAPTER_V1) { 1314 icom_adapter->numb_ports = 2; 1315 1316 for (i = 0; i < 2; i++) { 1317 icom_port = &icom_adapter->port_info[i]; 1318 icom_port->port = i; 1319 icom_port->status = ICOM_PORT_ACTIVE; 1320 icom_port->imbed_modem = ICOM_UNKNOWN; 1321 } 1322 } else { 1323 if (subsystem_id == PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL) { 1324 icom_adapter->numb_ports = 4; 1325 1326 for (i = 0; i < 4; i++) { 1327 icom_port = &icom_adapter->port_info[i]; 1328 1329 icom_port->port = i; 1330 icom_port->status = ICOM_PORT_ACTIVE; 1331 icom_port->imbed_modem = ICOM_IMBED_MODEM; 1332 } 1333 } else { 1334 icom_adapter->numb_ports = 4; 1335 1336 icom_adapter->port_info[0].port = 0; 1337 icom_adapter->port_info[0].status = ICOM_PORT_ACTIVE; 1338 1339 if (subsystem_id == 1340 PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM) { 1341 icom_adapter->port_info[0].imbed_modem = ICOM_IMBED_MODEM; 1342 } else { 1343 icom_adapter->port_info[0].imbed_modem = ICOM_RVX; 1344 } 1345 1346 icom_adapter->port_info[1].status = ICOM_PORT_OFF; 1347 1348 icom_adapter->port_info[2].port = 2; 1349 icom_adapter->port_info[2].status = ICOM_PORT_ACTIVE; 1350 icom_adapter->port_info[2].imbed_modem = ICOM_RVX; 1351 icom_adapter->port_info[3].status = ICOM_PORT_OFF; 1352 } 1353 } 1354 1355 return 0; 1356 } 1357 1358 static void icom_port_active(struct icom_port *icom_port, struct icom_adapter *icom_adapter, int port_num) 1359 { 1360 if (icom_adapter->version == ADAPTER_V1) { 1361 icom_port->global_reg = icom_adapter->base_addr + 0x4000; 1362 icom_port->int_reg = icom_adapter->base_addr + 1363 0x4004 + 2 - 2 * port_num; 1364 } else { 1365 icom_port->global_reg = icom_adapter->base_addr + 0x8000; 1366 if (icom_port->port < 2) 1367 icom_port->int_reg = icom_adapter->base_addr + 1368 0x8004 + 2 - 2 * icom_port->port; 1369 else 1370 icom_port->int_reg = icom_adapter->base_addr + 1371 0x8024 + 2 - 2 * (icom_port->port - 2); 1372 } 1373 } 1374 static int icom_load_ports(struct icom_adapter *icom_adapter) 1375 { 1376 struct icom_port *icom_port; 1377 int port_num; 1378 1379 for (port_num = 0; port_num < icom_adapter->numb_ports; port_num++) { 1380 1381 icom_port = &icom_adapter->port_info[port_num]; 1382 1383 if (icom_port->status == ICOM_PORT_ACTIVE) { 1384 icom_port_active(icom_port, icom_adapter, port_num); 1385 icom_port->dram = icom_adapter->base_addr + 1386 0x2000 * icom_port->port; 1387 1388 icom_port->adapter = icom_adapter; 1389 1390 /* get port memory */ 1391 if (get_port_memory(icom_port) != 0) { 1392 dev_err(&icom_port->adapter->pci_dev->dev, 1393 "Memory allocation for port FAILED\n"); 1394 } 1395 } 1396 } 1397 return 0; 1398 } 1399 1400 static int icom_alloc_adapter(struct icom_adapter 1401 **icom_adapter_ref) 1402 { 1403 int adapter_count = 0; 1404 struct icom_adapter *icom_adapter; 1405 struct icom_adapter *cur_adapter_entry; 1406 struct list_head *tmp; 1407 1408 icom_adapter = kzalloc(sizeof(struct icom_adapter), GFP_KERNEL); 1409 1410 if (!icom_adapter) { 1411 return -ENOMEM; 1412 } 1413 1414 list_for_each(tmp, &icom_adapter_head) { 1415 cur_adapter_entry = 1416 list_entry(tmp, struct icom_adapter, 1417 icom_adapter_entry); 1418 if (cur_adapter_entry->index != adapter_count) { 1419 break; 1420 } 1421 adapter_count++; 1422 } 1423 1424 icom_adapter->index = adapter_count; 1425 list_add_tail(&icom_adapter->icom_adapter_entry, tmp); 1426 1427 *icom_adapter_ref = icom_adapter; 1428 return 0; 1429 } 1430 1431 static void icom_free_adapter(struct icom_adapter *icom_adapter) 1432 { 1433 list_del(&icom_adapter->icom_adapter_entry); 1434 kfree(icom_adapter); 1435 } 1436 1437 static void icom_remove_adapter(struct icom_adapter *icom_adapter) 1438 { 1439 struct icom_port *icom_port; 1440 int index; 1441 1442 for (index = 0; index < icom_adapter->numb_ports; index++) { 1443 icom_port = &icom_adapter->port_info[index]; 1444 1445 if (icom_port->status == ICOM_PORT_ACTIVE) { 1446 dev_info(&icom_adapter->pci_dev->dev, 1447 "Device removed\n"); 1448 1449 uart_remove_one_port(&icom_uart_driver, 1450 &icom_port->uart_port); 1451 1452 /* be sure that DTR and RTS are dropped */ 1453 writeb(0x00, &icom_port->dram->osr); 1454 1455 /* Wait 0.1 Sec for simple Init to complete */ 1456 msleep(100); 1457 1458 /* Stop proccessor */ 1459 stop_processor(icom_port); 1460 1461 free_port_memory(icom_port); 1462 } 1463 } 1464 1465 free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter); 1466 iounmap(icom_adapter->base_addr); 1467 pci_release_regions(icom_adapter->pci_dev); 1468 icom_free_adapter(icom_adapter); 1469 } 1470 1471 static void icom_kref_release(struct kref *kref) 1472 { 1473 struct icom_adapter *icom_adapter; 1474 1475 icom_adapter = to_icom_adapter(kref); 1476 icom_remove_adapter(icom_adapter); 1477 } 1478 1479 static int icom_probe(struct pci_dev *dev, 1480 const struct pci_device_id *ent) 1481 { 1482 int index; 1483 unsigned int command_reg; 1484 int retval; 1485 struct icom_adapter *icom_adapter; 1486 struct icom_port *icom_port; 1487 1488 retval = pci_enable_device(dev); 1489 if (retval) { 1490 dev_err(&dev->dev, "Device enable FAILED\n"); 1491 return retval; 1492 } 1493 1494 retval = pci_request_regions(dev, "icom"); 1495 if (retval) { 1496 dev_err(&dev->dev, "pci_request_regions FAILED\n"); 1497 pci_disable_device(dev); 1498 return retval; 1499 } 1500 1501 pci_set_master(dev); 1502 1503 retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg); 1504 if (retval) { 1505 dev_err(&dev->dev, "PCI Config read FAILED\n"); 1506 return retval; 1507 } 1508 1509 pci_write_config_dword(dev, PCI_COMMAND, 1510 command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER 1511 | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); 1512 1513 if (ent->driver_data == ADAPTER_V1) { 1514 pci_write_config_dword(dev, 0x44, 0x8300830A); 1515 } else { 1516 pci_write_config_dword(dev, 0x44, 0x42004200); 1517 pci_write_config_dword(dev, 0x48, 0x42004200); 1518 } 1519 1520 1521 retval = icom_alloc_adapter(&icom_adapter); 1522 if (retval) { 1523 dev_err(&dev->dev, "icom_alloc_adapter FAILED\n"); 1524 retval = -EIO; 1525 goto probe_exit0; 1526 } 1527 1528 icom_adapter->base_addr_pci = pci_resource_start(dev, 0); 1529 icom_adapter->pci_dev = dev; 1530 icom_adapter->version = ent->driver_data; 1531 icom_adapter->subsystem_id = ent->subdevice; 1532 1533 1534 retval = icom_init_ports(icom_adapter); 1535 if (retval) { 1536 dev_err(&dev->dev, "Port configuration failed\n"); 1537 goto probe_exit1; 1538 } 1539 1540 icom_adapter->base_addr = pci_ioremap_bar(dev, 0); 1541 1542 if (!icom_adapter->base_addr) { 1543 retval = -ENOMEM; 1544 goto probe_exit1; 1545 } 1546 1547 /* save off irq and request irq line */ 1548 retval = request_irq(dev->irq, icom_interrupt, IRQF_SHARED, ICOM_DRIVER_NAME, (void *)icom_adapter); 1549 if (retval) { 1550 goto probe_exit2; 1551 } 1552 1553 retval = icom_load_ports(icom_adapter); 1554 1555 for (index = 0; index < icom_adapter->numb_ports; index++) { 1556 icom_port = &icom_adapter->port_info[index]; 1557 1558 if (icom_port->status == ICOM_PORT_ACTIVE) { 1559 icom_port->uart_port.irq = icom_port->adapter->pci_dev->irq; 1560 icom_port->uart_port.type = PORT_ICOM; 1561 icom_port->uart_port.iotype = UPIO_MEM; 1562 icom_port->uart_port.membase = 1563 (unsigned char __iomem *)icom_adapter->base_addr_pci; 1564 icom_port->uart_port.fifosize = 16; 1565 icom_port->uart_port.ops = &icom_ops; 1566 icom_port->uart_port.line = 1567 icom_port->port + icom_adapter->index * 4; 1568 if (uart_add_one_port (&icom_uart_driver, &icom_port->uart_port)) { 1569 icom_port->status = ICOM_PORT_OFF; 1570 dev_err(&dev->dev, "Device add failed\n"); 1571 } else 1572 dev_info(&dev->dev, "Device added\n"); 1573 } 1574 } 1575 1576 kref_init(&icom_adapter->kref); 1577 return 0; 1578 1579 probe_exit2: 1580 iounmap(icom_adapter->base_addr); 1581 probe_exit1: 1582 icom_free_adapter(icom_adapter); 1583 1584 probe_exit0: 1585 pci_release_regions(dev); 1586 pci_disable_device(dev); 1587 1588 return retval; 1589 } 1590 1591 static void icom_remove(struct pci_dev *dev) 1592 { 1593 struct icom_adapter *icom_adapter; 1594 struct list_head *tmp; 1595 1596 list_for_each(tmp, &icom_adapter_head) { 1597 icom_adapter = list_entry(tmp, struct icom_adapter, 1598 icom_adapter_entry); 1599 if (icom_adapter->pci_dev == dev) { 1600 kref_put(&icom_adapter->kref, icom_kref_release); 1601 return; 1602 } 1603 } 1604 1605 dev_err(&dev->dev, "Unable to find device to remove\n"); 1606 } 1607 1608 static struct pci_driver icom_pci_driver = { 1609 .name = ICOM_DRIVER_NAME, 1610 .id_table = icom_pci_table, 1611 .probe = icom_probe, 1612 .remove = icom_remove, 1613 }; 1614 1615 static int __init icom_init(void) 1616 { 1617 int ret; 1618 1619 ret = uart_register_driver(&icom_uart_driver); 1620 if (ret) 1621 return ret; 1622 1623 ret = pci_register_driver(&icom_pci_driver); 1624 1625 if (ret < 0) 1626 uart_unregister_driver(&icom_uart_driver); 1627 1628 return ret; 1629 } 1630 1631 static void __exit icom_exit(void) 1632 { 1633 pci_unregister_driver(&icom_pci_driver); 1634 uart_unregister_driver(&icom_uart_driver); 1635 } 1636 1637 module_init(icom_init); 1638 module_exit(icom_exit); 1639 1640 MODULE_AUTHOR("Michael Anderson <mjanders@us.ibm.com>"); 1641 MODULE_DESCRIPTION("IBM iSeries Serial IOA driver"); 1642 MODULE_SUPPORTED_DEVICE 1643 ("IBM iSeries 2745, 2771, 2772, 2742, 2793 and 2805 Communications adapters"); 1644 MODULE_LICENSE("GPL"); 1645 MODULE_FIRMWARE("icom_call_setup.bin"); 1646 MODULE_FIRMWARE("icom_res_dce.bin"); 1647 MODULE_FIRMWARE("icom_asc.bin"); 1648