1 /* 2 * icom.c 3 * 4 * Copyright (C) 2001 IBM Corporation. All rights reserved. 5 * 6 * Serial device driver. 7 * 8 * Based on code from serial.c 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 23 * 24 */ 25 #define SERIAL_DO_RESTART 26 #include <linux/module.h> 27 #include <linux/kernel.h> 28 #include <linux/errno.h> 29 #include <linux/signal.h> 30 #include <linux/timer.h> 31 #include <linux/interrupt.h> 32 #include <linux/tty.h> 33 #include <linux/termios.h> 34 #include <linux/fs.h> 35 #include <linux/tty_flip.h> 36 #include <linux/serial.h> 37 #include <linux/serial_reg.h> 38 #include <linux/major.h> 39 #include <linux/string.h> 40 #include <linux/fcntl.h> 41 #include <linux/ptrace.h> 42 #include <linux/ioport.h> 43 #include <linux/mm.h> 44 #include <linux/slab.h> 45 #include <linux/init.h> 46 #include <linux/delay.h> 47 #include <linux/pci.h> 48 #include <linux/vmalloc.h> 49 #include <linux/smp.h> 50 #include <linux/spinlock.h> 51 #include <linux/kref.h> 52 #include <linux/firmware.h> 53 #include <linux/bitops.h> 54 55 #include <asm/io.h> 56 #include <asm/irq.h> 57 #include <asm/uaccess.h> 58 59 #include "icom.h" 60 61 /*#define ICOM_TRACE enable port trace capabilities */ 62 63 #define ICOM_DRIVER_NAME "icom" 64 #define ICOM_VERSION_STR "1.3.1" 65 #define NR_PORTS 128 66 #define ICOM_PORT ((struct icom_port *)port) 67 #define to_icom_adapter(d) container_of(d, struct icom_adapter, kref) 68 69 static const struct pci_device_id icom_pci_table[] = { 70 { 71 .vendor = PCI_VENDOR_ID_IBM, 72 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1, 73 .subvendor = PCI_ANY_ID, 74 .subdevice = PCI_ANY_ID, 75 .driver_data = ADAPTER_V1, 76 }, 77 { 78 .vendor = PCI_VENDOR_ID_IBM, 79 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 80 .subvendor = PCI_VENDOR_ID_IBM, 81 .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX, 82 .driver_data = ADAPTER_V2, 83 }, 84 { 85 .vendor = PCI_VENDOR_ID_IBM, 86 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 87 .subvendor = PCI_VENDOR_ID_IBM, 88 .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM, 89 .driver_data = ADAPTER_V2, 90 }, 91 { 92 .vendor = PCI_VENDOR_ID_IBM, 93 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 94 .subvendor = PCI_VENDOR_ID_IBM, 95 .subdevice = PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL, 96 .driver_data = ADAPTER_V2, 97 }, 98 { 99 .vendor = PCI_VENDOR_ID_IBM, 100 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 101 .subvendor = PCI_VENDOR_ID_IBM, 102 .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE, 103 .driver_data = ADAPTER_V2, 104 }, 105 {} 106 }; 107 108 struct lookup_proc_table start_proc[4] = { 109 {NULL, ICOM_CONTROL_START_A}, 110 {NULL, ICOM_CONTROL_START_B}, 111 {NULL, ICOM_CONTROL_START_C}, 112 {NULL, ICOM_CONTROL_START_D} 113 }; 114 115 116 struct lookup_proc_table stop_proc[4] = { 117 {NULL, ICOM_CONTROL_STOP_A}, 118 {NULL, ICOM_CONTROL_STOP_B}, 119 {NULL, ICOM_CONTROL_STOP_C}, 120 {NULL, ICOM_CONTROL_STOP_D} 121 }; 122 123 struct lookup_int_table int_mask_tbl[4] = { 124 {NULL, ICOM_INT_MASK_PRC_A}, 125 {NULL, ICOM_INT_MASK_PRC_B}, 126 {NULL, ICOM_INT_MASK_PRC_C}, 127 {NULL, ICOM_INT_MASK_PRC_D}, 128 }; 129 130 131 MODULE_DEVICE_TABLE(pci, icom_pci_table); 132 133 static LIST_HEAD(icom_adapter_head); 134 135 /* spinlock for adapter initialization and changing adapter operations */ 136 static spinlock_t icom_lock; 137 138 #ifdef ICOM_TRACE 139 static inline void trace(struct icom_port *icom_port, char *trace_pt, 140 unsigned long trace_data) 141 { 142 dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n", 143 icom_port->port, trace_pt, trace_data); 144 } 145 #else 146 static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {}; 147 #endif 148 static void icom_kref_release(struct kref *kref); 149 150 static void free_port_memory(struct icom_port *icom_port) 151 { 152 struct pci_dev *dev = icom_port->adapter->pci_dev; 153 154 trace(icom_port, "RET_PORT_MEM", 0); 155 if (icom_port->recv_buf) { 156 pci_free_consistent(dev, 4096, icom_port->recv_buf, 157 icom_port->recv_buf_pci); 158 icom_port->recv_buf = NULL; 159 } 160 if (icom_port->xmit_buf) { 161 pci_free_consistent(dev, 4096, icom_port->xmit_buf, 162 icom_port->xmit_buf_pci); 163 icom_port->xmit_buf = NULL; 164 } 165 if (icom_port->statStg) { 166 pci_free_consistent(dev, 4096, icom_port->statStg, 167 icom_port->statStg_pci); 168 icom_port->statStg = NULL; 169 } 170 171 if (icom_port->xmitRestart) { 172 pci_free_consistent(dev, 4096, icom_port->xmitRestart, 173 icom_port->xmitRestart_pci); 174 icom_port->xmitRestart = NULL; 175 } 176 } 177 178 static int __devinit get_port_memory(struct icom_port *icom_port) 179 { 180 int index; 181 unsigned long stgAddr; 182 unsigned long startStgAddr; 183 unsigned long offset; 184 struct pci_dev *dev = icom_port->adapter->pci_dev; 185 186 icom_port->xmit_buf = 187 pci_alloc_consistent(dev, 4096, &icom_port->xmit_buf_pci); 188 if (!icom_port->xmit_buf) { 189 dev_err(&dev->dev, "Can not allocate Transmit buffer\n"); 190 return -ENOMEM; 191 } 192 193 trace(icom_port, "GET_PORT_MEM", 194 (unsigned long) icom_port->xmit_buf); 195 196 icom_port->recv_buf = 197 pci_alloc_consistent(dev, 4096, &icom_port->recv_buf_pci); 198 if (!icom_port->recv_buf) { 199 dev_err(&dev->dev, "Can not allocate Receive buffer\n"); 200 free_port_memory(icom_port); 201 return -ENOMEM; 202 } 203 trace(icom_port, "GET_PORT_MEM", 204 (unsigned long) icom_port->recv_buf); 205 206 icom_port->statStg = 207 pci_alloc_consistent(dev, 4096, &icom_port->statStg_pci); 208 if (!icom_port->statStg) { 209 dev_err(&dev->dev, "Can not allocate Status buffer\n"); 210 free_port_memory(icom_port); 211 return -ENOMEM; 212 } 213 trace(icom_port, "GET_PORT_MEM", 214 (unsigned long) icom_port->statStg); 215 216 icom_port->xmitRestart = 217 pci_alloc_consistent(dev, 4096, &icom_port->xmitRestart_pci); 218 if (!icom_port->xmitRestart) { 219 dev_err(&dev->dev, 220 "Can not allocate xmit Restart buffer\n"); 221 free_port_memory(icom_port); 222 return -ENOMEM; 223 } 224 225 memset(icom_port->statStg, 0, 4096); 226 227 /* FODs: Frame Out Descriptor Queue, this is a FIFO queue that 228 indicates that frames are to be transmitted 229 */ 230 231 stgAddr = (unsigned long) icom_port->statStg; 232 for (index = 0; index < NUM_XBUFFS; index++) { 233 trace(icom_port, "FOD_ADDR", stgAddr); 234 stgAddr = stgAddr + sizeof(icom_port->statStg->xmit[0]); 235 if (index < (NUM_XBUFFS - 1)) { 236 memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); 237 icom_port->statStg->xmit[index].leLengthASD = 238 (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); 239 trace(icom_port, "FOD_ADDR", stgAddr); 240 trace(icom_port, "FOD_XBUFF", 241 (unsigned long) icom_port->xmit_buf); 242 icom_port->statStg->xmit[index].leBuffer = 243 cpu_to_le32(icom_port->xmit_buf_pci); 244 } else if (index == (NUM_XBUFFS - 1)) { 245 memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); 246 icom_port->statStg->xmit[index].leLengthASD = 247 (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); 248 trace(icom_port, "FOD_XBUFF", 249 (unsigned long) icom_port->xmit_buf); 250 icom_port->statStg->xmit[index].leBuffer = 251 cpu_to_le32(icom_port->xmit_buf_pci); 252 } else { 253 memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); 254 } 255 } 256 /* FIDs */ 257 startStgAddr = stgAddr; 258 259 /* fill in every entry, even if no buffer */ 260 for (index = 0; index < NUM_RBUFFS; index++) { 261 trace(icom_port, "FID_ADDR", stgAddr); 262 stgAddr = stgAddr + sizeof(icom_port->statStg->rcv[0]); 263 icom_port->statStg->rcv[index].leLength = 0; 264 icom_port->statStg->rcv[index].WorkingLength = 265 (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); 266 if (index < (NUM_RBUFFS - 1) ) { 267 offset = stgAddr - (unsigned long) icom_port->statStg; 268 icom_port->statStg->rcv[index].leNext = 269 cpu_to_le32(icom_port-> statStg_pci + offset); 270 trace(icom_port, "FID_RBUFF", 271 (unsigned long) icom_port->recv_buf); 272 icom_port->statStg->rcv[index].leBuffer = 273 cpu_to_le32(icom_port->recv_buf_pci); 274 } else if (index == (NUM_RBUFFS -1) ) { 275 offset = startStgAddr - (unsigned long) icom_port->statStg; 276 icom_port->statStg->rcv[index].leNext = 277 cpu_to_le32(icom_port-> statStg_pci + offset); 278 trace(icom_port, "FID_RBUFF", 279 (unsigned long) icom_port->recv_buf + 2048); 280 icom_port->statStg->rcv[index].leBuffer = 281 cpu_to_le32(icom_port->recv_buf_pci + 2048); 282 } else { 283 icom_port->statStg->rcv[index].leNext = 0; 284 icom_port->statStg->rcv[index].leBuffer = 0; 285 } 286 } 287 288 return 0; 289 } 290 291 static void stop_processor(struct icom_port *icom_port) 292 { 293 unsigned long temp; 294 unsigned long flags; 295 int port; 296 297 spin_lock_irqsave(&icom_lock, flags); 298 299 port = icom_port->port; 300 if (port == 0 || port == 1) 301 stop_proc[port].global_control_reg = &icom_port->global_reg->control; 302 else 303 stop_proc[port].global_control_reg = &icom_port->global_reg->control_2; 304 305 306 if (port < 4) { 307 temp = readl(stop_proc[port].global_control_reg); 308 temp = 309 (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id; 310 writel(temp, stop_proc[port].global_control_reg); 311 312 /* write flush */ 313 readl(stop_proc[port].global_control_reg); 314 } else { 315 dev_err(&icom_port->adapter->pci_dev->dev, 316 "Invalid port assignment\n"); 317 } 318 319 spin_unlock_irqrestore(&icom_lock, flags); 320 } 321 322 static void start_processor(struct icom_port *icom_port) 323 { 324 unsigned long temp; 325 unsigned long flags; 326 int port; 327 328 spin_lock_irqsave(&icom_lock, flags); 329 330 port = icom_port->port; 331 if (port == 0 || port == 1) 332 start_proc[port].global_control_reg = &icom_port->global_reg->control; 333 else 334 start_proc[port].global_control_reg = &icom_port->global_reg->control_2; 335 if (port < 4) { 336 temp = readl(start_proc[port].global_control_reg); 337 temp = 338 (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id; 339 writel(temp, start_proc[port].global_control_reg); 340 341 /* write flush */ 342 readl(start_proc[port].global_control_reg); 343 } else { 344 dev_err(&icom_port->adapter->pci_dev->dev, 345 "Invalid port assignment\n"); 346 } 347 348 spin_unlock_irqrestore(&icom_lock, flags); 349 } 350 351 static void load_code(struct icom_port *icom_port) 352 { 353 const struct firmware *fw; 354 char __iomem *iram_ptr; 355 int index; 356 int status = 0; 357 void __iomem *dram_ptr = icom_port->dram; 358 dma_addr_t temp_pci; 359 unsigned char *new_page = NULL; 360 unsigned char cable_id = NO_CABLE; 361 struct pci_dev *dev = icom_port->adapter->pci_dev; 362 363 /* Clear out any pending interrupts */ 364 writew(0x3FFF, icom_port->int_reg); 365 366 trace(icom_port, "CLEAR_INTERRUPTS", 0); 367 368 /* Stop processor */ 369 stop_processor(icom_port); 370 371 /* Zero out DRAM */ 372 memset_io(dram_ptr, 0, 512); 373 374 /* Load Call Setup into Adapter */ 375 if (request_firmware(&fw, "icom_call_setup.bin", &dev->dev) < 0) { 376 dev_err(&dev->dev,"Unable to load icom_call_setup.bin firmware image\n"); 377 status = -1; 378 goto load_code_exit; 379 } 380 381 if (fw->size > ICOM_DCE_IRAM_OFFSET) { 382 dev_err(&dev->dev, "Invalid firmware image for icom_call_setup.bin found.\n"); 383 release_firmware(fw); 384 status = -1; 385 goto load_code_exit; 386 } 387 388 iram_ptr = (char __iomem *)icom_port->dram + ICOM_IRAM_OFFSET; 389 for (index = 0; index < fw->size; index++) 390 writeb(fw->data[index], &iram_ptr[index]); 391 392 release_firmware(fw); 393 394 /* Load Resident DCE portion of Adapter */ 395 if (request_firmware(&fw, "icom_res_dce.bin", &dev->dev) < 0) { 396 dev_err(&dev->dev,"Unable to load icom_res_dce.bin firmware image\n"); 397 status = -1; 398 goto load_code_exit; 399 } 400 401 if (fw->size > ICOM_IRAM_SIZE) { 402 dev_err(&dev->dev, "Invalid firmware image for icom_res_dce.bin found.\n"); 403 release_firmware(fw); 404 status = -1; 405 goto load_code_exit; 406 } 407 408 iram_ptr = (char __iomem *) icom_port->dram + ICOM_IRAM_OFFSET; 409 for (index = ICOM_DCE_IRAM_OFFSET; index < fw->size; index++) 410 writeb(fw->data[index], &iram_ptr[index]); 411 412 release_firmware(fw); 413 414 /* Set Hardware level */ 415 if (icom_port->adapter->version == ADAPTER_V2) 416 writeb(V2_HARDWARE, &(icom_port->dram->misc_flags)); 417 418 /* Start the processor in Adapter */ 419 start_processor(icom_port); 420 421 writeb((HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL), 422 &(icom_port->dram->HDLCConfigReg)); 423 writeb(0x04, &(icom_port->dram->FlagFillIdleTimer)); /* 0.5 seconds */ 424 writeb(0x00, &(icom_port->dram->CmdReg)); 425 writeb(0x10, &(icom_port->dram->async_config3)); 426 writeb((ICOM_ACFG_DRIVE1 | ICOM_ACFG_NO_PARITY | ICOM_ACFG_8BPC | 427 ICOM_ACFG_1STOP_BIT), &(icom_port->dram->async_config2)); 428 429 /*Set up data in icom DRAM to indicate where personality 430 *code is located and its length. 431 */ 432 new_page = pci_alloc_consistent(dev, 4096, &temp_pci); 433 434 if (!new_page) { 435 dev_err(&dev->dev, "Can not allocate DMA buffer\n"); 436 status = -1; 437 goto load_code_exit; 438 } 439 440 if (request_firmware(&fw, "icom_asc.bin", &dev->dev) < 0) { 441 dev_err(&dev->dev,"Unable to load icom_asc.bin firmware image\n"); 442 status = -1; 443 goto load_code_exit; 444 } 445 446 if (fw->size > ICOM_DCE_IRAM_OFFSET) { 447 dev_err(&dev->dev, "Invalid firmware image for icom_asc.bin found.\n"); 448 release_firmware(fw); 449 status = -1; 450 goto load_code_exit; 451 } 452 453 for (index = 0; index < fw->size; index++) 454 new_page[index] = fw->data[index]; 455 456 release_firmware(fw); 457 458 writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length); 459 writel(temp_pci, &icom_port->dram->mac_load_addr); 460 461 /*Setting the syncReg to 0x80 causes adapter to start downloading 462 the personality code into adapter instruction RAM. 463 Once code is loaded, it will begin executing and, based on 464 information provided above, will start DMAing data from 465 shared memory to adapter DRAM. 466 */ 467 /* the wait loop below verifies this write operation has been done 468 and processed 469 */ 470 writeb(START_DOWNLOAD, &icom_port->dram->sync); 471 472 /* Wait max 1 Sec for data download and processor to start */ 473 for (index = 0; index < 10; index++) { 474 msleep(100); 475 if (readb(&icom_port->dram->misc_flags) & ICOM_HDW_ACTIVE) 476 break; 477 } 478 479 if (index == 10) 480 status = -1; 481 482 /* 483 * check Cable ID 484 */ 485 cable_id = readb(&icom_port->dram->cable_id); 486 487 if (cable_id & ICOM_CABLE_ID_VALID) { 488 /* Get cable ID into the lower 4 bits (standard form) */ 489 cable_id = (cable_id & ICOM_CABLE_ID_MASK) >> 4; 490 icom_port->cable_id = cable_id; 491 } else { 492 dev_err(&dev->dev,"Invalid or no cable attached\n"); 493 icom_port->cable_id = NO_CABLE; 494 } 495 496 load_code_exit: 497 498 if (status != 0) { 499 /* Clear out any pending interrupts */ 500 writew(0x3FFF, icom_port->int_reg); 501 502 /* Turn off port */ 503 writeb(ICOM_DISABLE, &(icom_port->dram->disable)); 504 505 /* Stop processor */ 506 stop_processor(icom_port); 507 508 dev_err(&icom_port->adapter->pci_dev->dev,"Port not opertional\n"); 509 } 510 511 if (new_page != NULL) 512 pci_free_consistent(dev, 4096, new_page, temp_pci); 513 } 514 515 static int startup(struct icom_port *icom_port) 516 { 517 unsigned long temp; 518 unsigned char cable_id, raw_cable_id; 519 unsigned long flags; 520 int port; 521 522 trace(icom_port, "STARTUP", 0); 523 524 if (!icom_port->dram) { 525 /* should NEVER be NULL */ 526 dev_err(&icom_port->adapter->pci_dev->dev, 527 "Unusable Port, port configuration missing\n"); 528 return -ENODEV; 529 } 530 531 /* 532 * check Cable ID 533 */ 534 raw_cable_id = readb(&icom_port->dram->cable_id); 535 trace(icom_port, "CABLE_ID", raw_cable_id); 536 537 /* Get cable ID into the lower 4 bits (standard form) */ 538 cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; 539 540 /* Check for valid Cable ID */ 541 if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || 542 (cable_id != icom_port->cable_id)) { 543 544 /* reload adapter code, pick up any potential changes in cable id */ 545 load_code(icom_port); 546 547 /* still no sign of cable, error out */ 548 raw_cable_id = readb(&icom_port->dram->cable_id); 549 cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; 550 if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || 551 (icom_port->cable_id == NO_CABLE)) 552 return -EIO; 553 } 554 555 /* 556 * Finally, clear and enable interrupts 557 */ 558 spin_lock_irqsave(&icom_lock, flags); 559 port = icom_port->port; 560 if (port == 0 || port == 1) 561 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; 562 else 563 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; 564 565 if (port == 0 || port == 2) 566 writew(0x00FF, icom_port->int_reg); 567 else 568 writew(0x3F00, icom_port->int_reg); 569 if (port < 4) { 570 temp = readl(int_mask_tbl[port].global_int_mask); 571 writel(temp & ~int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); 572 573 /* write flush */ 574 readl(int_mask_tbl[port].global_int_mask); 575 } else { 576 dev_err(&icom_port->adapter->pci_dev->dev, 577 "Invalid port assignment\n"); 578 } 579 580 spin_unlock_irqrestore(&icom_lock, flags); 581 return 0; 582 } 583 584 static void shutdown(struct icom_port *icom_port) 585 { 586 unsigned long temp; 587 unsigned char cmdReg; 588 unsigned long flags; 589 int port; 590 591 spin_lock_irqsave(&icom_lock, flags); 592 trace(icom_port, "SHUTDOWN", 0); 593 594 /* 595 * disable all interrupts 596 */ 597 port = icom_port->port; 598 if (port == 0 || port == 1) 599 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; 600 else 601 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; 602 603 if (port < 4) { 604 temp = readl(int_mask_tbl[port].global_int_mask); 605 writel(temp | int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); 606 607 /* write flush */ 608 readl(int_mask_tbl[port].global_int_mask); 609 } else { 610 dev_err(&icom_port->adapter->pci_dev->dev, 611 "Invalid port assignment\n"); 612 } 613 spin_unlock_irqrestore(&icom_lock, flags); 614 615 /* 616 * disable break condition 617 */ 618 cmdReg = readb(&icom_port->dram->CmdReg); 619 if (cmdReg & CMD_SND_BREAK) { 620 writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg); 621 } 622 } 623 624 static int icom_write(struct uart_port *port) 625 { 626 unsigned long data_count; 627 unsigned char cmdReg; 628 unsigned long offset; 629 int temp_tail = port->state->xmit.tail; 630 631 trace(ICOM_PORT, "WRITE", 0); 632 633 if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & 634 SA_FLAGS_READY_TO_XMIT) { 635 trace(ICOM_PORT, "WRITE_FULL", 0); 636 return 0; 637 } 638 639 data_count = 0; 640 while ((port->state->xmit.head != temp_tail) && 641 (data_count <= XMIT_BUFF_SZ)) { 642 643 ICOM_PORT->xmit_buf[data_count++] = 644 port->state->xmit.buf[temp_tail]; 645 646 temp_tail++; 647 temp_tail &= (UART_XMIT_SIZE - 1); 648 } 649 650 if (data_count) { 651 ICOM_PORT->statStg->xmit[0].flags = 652 cpu_to_le16(SA_FLAGS_READY_TO_XMIT); 653 ICOM_PORT->statStg->xmit[0].leLength = 654 cpu_to_le16(data_count); 655 offset = 656 (unsigned long) &ICOM_PORT->statStg->xmit[0] - 657 (unsigned long) ICOM_PORT->statStg; 658 *ICOM_PORT->xmitRestart = 659 cpu_to_le32(ICOM_PORT->statStg_pci + offset); 660 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 661 writeb(cmdReg | CMD_XMIT_RCV_ENABLE, 662 &ICOM_PORT->dram->CmdReg); 663 writeb(START_XMIT, &ICOM_PORT->dram->StartXmitCmd); 664 trace(ICOM_PORT, "WRITE_START", data_count); 665 /* write flush */ 666 readb(&ICOM_PORT->dram->StartXmitCmd); 667 } 668 669 return data_count; 670 } 671 672 static inline void check_modem_status(struct icom_port *icom_port) 673 { 674 static char old_status = 0; 675 char delta_status; 676 unsigned char status; 677 678 spin_lock(&icom_port->uart_port.lock); 679 680 /*modem input register */ 681 status = readb(&icom_port->dram->isr); 682 trace(icom_port, "CHECK_MODEM", status); 683 delta_status = status ^ old_status; 684 if (delta_status) { 685 if (delta_status & ICOM_RI) 686 icom_port->uart_port.icount.rng++; 687 if (delta_status & ICOM_DSR) 688 icom_port->uart_port.icount.dsr++; 689 if (delta_status & ICOM_DCD) 690 uart_handle_dcd_change(&icom_port->uart_port, 691 delta_status & ICOM_DCD); 692 if (delta_status & ICOM_CTS) 693 uart_handle_cts_change(&icom_port->uart_port, 694 delta_status & ICOM_CTS); 695 696 wake_up_interruptible(&icom_port->uart_port.state-> 697 port.delta_msr_wait); 698 old_status = status; 699 } 700 spin_unlock(&icom_port->uart_port.lock); 701 } 702 703 static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port) 704 { 705 unsigned short int count; 706 int i; 707 708 if (port_int_reg & (INT_XMIT_COMPLETED)) { 709 trace(icom_port, "XMIT_COMPLETE", 0); 710 711 /* clear buffer in use bit */ 712 icom_port->statStg->xmit[0].flags &= 713 cpu_to_le16(~SA_FLAGS_READY_TO_XMIT); 714 715 count = (unsigned short int) 716 cpu_to_le16(icom_port->statStg->xmit[0].leLength); 717 icom_port->uart_port.icount.tx += count; 718 719 for (i=0; i<count && 720 !uart_circ_empty(&icom_port->uart_port.state->xmit); i++) { 721 722 icom_port->uart_port.state->xmit.tail++; 723 icom_port->uart_port.state->xmit.tail &= 724 (UART_XMIT_SIZE - 1); 725 } 726 727 if (!icom_write(&icom_port->uart_port)) 728 /* activate write queue */ 729 uart_write_wakeup(&icom_port->uart_port); 730 } else 731 trace(icom_port, "XMIT_DISABLED", 0); 732 } 733 734 static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port) 735 { 736 short int count, rcv_buff; 737 struct tty_struct *tty = icom_port->uart_port.state->port.tty; 738 unsigned short int status; 739 struct uart_icount *icount; 740 unsigned long offset; 741 unsigned char flag; 742 743 trace(icom_port, "RCV_COMPLETE", 0); 744 rcv_buff = icom_port->next_rcv; 745 746 status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); 747 while (status & SA_FL_RCV_DONE) { 748 int first = -1; 749 750 trace(icom_port, "FID_STATUS", status); 751 count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength); 752 753 trace(icom_port, "RCV_COUNT", count); 754 755 trace(icom_port, "REAL_COUNT", count); 756 757 offset = 758 cpu_to_le32(icom_port->statStg->rcv[rcv_buff].leBuffer) - 759 icom_port->recv_buf_pci; 760 761 /* Block copy all but the last byte as this may have status */ 762 if (count > 0) { 763 first = icom_port->recv_buf[offset]; 764 tty_insert_flip_string(tty, icom_port->recv_buf + offset, count - 1); 765 } 766 767 icount = &icom_port->uart_port.icount; 768 icount->rx += count; 769 770 /* Break detect logic */ 771 if ((status & SA_FLAGS_FRAME_ERROR) 772 && first == 0) { 773 status &= ~SA_FLAGS_FRAME_ERROR; 774 status |= SA_FLAGS_BREAK_DET; 775 trace(icom_port, "BREAK_DET", 0); 776 } 777 778 flag = TTY_NORMAL; 779 780 if (status & 781 (SA_FLAGS_BREAK_DET | SA_FLAGS_PARITY_ERROR | 782 SA_FLAGS_FRAME_ERROR | SA_FLAGS_OVERRUN)) { 783 784 if (status & SA_FLAGS_BREAK_DET) 785 icount->brk++; 786 if (status & SA_FLAGS_PARITY_ERROR) 787 icount->parity++; 788 if (status & SA_FLAGS_FRAME_ERROR) 789 icount->frame++; 790 if (status & SA_FLAGS_OVERRUN) 791 icount->overrun++; 792 793 /* 794 * Now check to see if character should be 795 * ignored, and mask off conditions which 796 * should be ignored. 797 */ 798 if (status & icom_port->ignore_status_mask) { 799 trace(icom_port, "IGNORE_CHAR", 0); 800 goto ignore_char; 801 } 802 803 status &= icom_port->read_status_mask; 804 805 if (status & SA_FLAGS_BREAK_DET) { 806 flag = TTY_BREAK; 807 } else if (status & SA_FLAGS_PARITY_ERROR) { 808 trace(icom_port, "PARITY_ERROR", 0); 809 flag = TTY_PARITY; 810 } else if (status & SA_FLAGS_FRAME_ERROR) 811 flag = TTY_FRAME; 812 813 } 814 815 tty_insert_flip_char(tty, *(icom_port->recv_buf + offset + count - 1), flag); 816 817 if (status & SA_FLAGS_OVERRUN) 818 /* 819 * Overrun is special, since it's 820 * reported immediately, and doesn't 821 * affect the current character 822 */ 823 tty_insert_flip_char(tty, 0, TTY_OVERRUN); 824 ignore_char: 825 icom_port->statStg->rcv[rcv_buff].flags = 0; 826 icom_port->statStg->rcv[rcv_buff].leLength = 0; 827 icom_port->statStg->rcv[rcv_buff].WorkingLength = 828 (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); 829 830 rcv_buff++; 831 if (rcv_buff == NUM_RBUFFS) 832 rcv_buff = 0; 833 834 status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); 835 } 836 icom_port->next_rcv = rcv_buff; 837 tty_flip_buffer_push(tty); 838 } 839 840 static void process_interrupt(u16 port_int_reg, 841 struct icom_port *icom_port) 842 { 843 844 spin_lock(&icom_port->uart_port.lock); 845 trace(icom_port, "INTERRUPT", port_int_reg); 846 847 if (port_int_reg & (INT_XMIT_COMPLETED | INT_XMIT_DISABLED)) 848 xmit_interrupt(port_int_reg, icom_port); 849 850 if (port_int_reg & INT_RCV_COMPLETED) 851 recv_interrupt(port_int_reg, icom_port); 852 853 spin_unlock(&icom_port->uart_port.lock); 854 } 855 856 static irqreturn_t icom_interrupt(int irq, void *dev_id) 857 { 858 void __iomem * int_reg; 859 u32 adapter_interrupts; 860 u16 port_int_reg; 861 struct icom_adapter *icom_adapter; 862 struct icom_port *icom_port; 863 864 /* find icom_port for this interrupt */ 865 icom_adapter = (struct icom_adapter *) dev_id; 866 867 if (icom_adapter->version == ADAPTER_V2) { 868 int_reg = icom_adapter->base_addr + 0x8024; 869 870 adapter_interrupts = readl(int_reg); 871 872 if (adapter_interrupts & 0x00003FFF) { 873 /* port 2 interrupt, NOTE: for all ADAPTER_V2, port 2 will be active */ 874 icom_port = &icom_adapter->port_info[2]; 875 port_int_reg = (u16) adapter_interrupts; 876 process_interrupt(port_int_reg, icom_port); 877 check_modem_status(icom_port); 878 } 879 if (adapter_interrupts & 0x3FFF0000) { 880 /* port 3 interrupt */ 881 icom_port = &icom_adapter->port_info[3]; 882 if (icom_port->status == ICOM_PORT_ACTIVE) { 883 port_int_reg = 884 (u16) (adapter_interrupts >> 16); 885 process_interrupt(port_int_reg, icom_port); 886 check_modem_status(icom_port); 887 } 888 } 889 890 /* Clear out any pending interrupts */ 891 writel(adapter_interrupts, int_reg); 892 893 int_reg = icom_adapter->base_addr + 0x8004; 894 } else { 895 int_reg = icom_adapter->base_addr + 0x4004; 896 } 897 898 adapter_interrupts = readl(int_reg); 899 900 if (adapter_interrupts & 0x00003FFF) { 901 /* port 0 interrupt, NOTE: for all adapters, port 0 will be active */ 902 icom_port = &icom_adapter->port_info[0]; 903 port_int_reg = (u16) adapter_interrupts; 904 process_interrupt(port_int_reg, icom_port); 905 check_modem_status(icom_port); 906 } 907 if (adapter_interrupts & 0x3FFF0000) { 908 /* port 1 interrupt */ 909 icom_port = &icom_adapter->port_info[1]; 910 if (icom_port->status == ICOM_PORT_ACTIVE) { 911 port_int_reg = (u16) (adapter_interrupts >> 16); 912 process_interrupt(port_int_reg, icom_port); 913 check_modem_status(icom_port); 914 } 915 } 916 917 /* Clear out any pending interrupts */ 918 writel(adapter_interrupts, int_reg); 919 920 /* flush the write */ 921 adapter_interrupts = readl(int_reg); 922 923 return IRQ_HANDLED; 924 } 925 926 /* 927 * ------------------------------------------------------------------ 928 * Begin serial-core API 929 * ------------------------------------------------------------------ 930 */ 931 static unsigned int icom_tx_empty(struct uart_port *port) 932 { 933 int ret; 934 unsigned long flags; 935 936 spin_lock_irqsave(&port->lock, flags); 937 if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & 938 SA_FLAGS_READY_TO_XMIT) 939 ret = TIOCSER_TEMT; 940 else 941 ret = 0; 942 943 spin_unlock_irqrestore(&port->lock, flags); 944 return ret; 945 } 946 947 static void icom_set_mctrl(struct uart_port *port, unsigned int mctrl) 948 { 949 unsigned char local_osr; 950 951 trace(ICOM_PORT, "SET_MODEM", 0); 952 local_osr = readb(&ICOM_PORT->dram->osr); 953 954 if (mctrl & TIOCM_RTS) { 955 trace(ICOM_PORT, "RAISE_RTS", 0); 956 local_osr |= ICOM_RTS; 957 } else { 958 trace(ICOM_PORT, "LOWER_RTS", 0); 959 local_osr &= ~ICOM_RTS; 960 } 961 962 if (mctrl & TIOCM_DTR) { 963 trace(ICOM_PORT, "RAISE_DTR", 0); 964 local_osr |= ICOM_DTR; 965 } else { 966 trace(ICOM_PORT, "LOWER_DTR", 0); 967 local_osr &= ~ICOM_DTR; 968 } 969 970 writeb(local_osr, &ICOM_PORT->dram->osr); 971 } 972 973 static unsigned int icom_get_mctrl(struct uart_port *port) 974 { 975 unsigned char status; 976 unsigned int result; 977 978 trace(ICOM_PORT, "GET_MODEM", 0); 979 980 status = readb(&ICOM_PORT->dram->isr); 981 982 result = ((status & ICOM_DCD) ? TIOCM_CAR : 0) 983 | ((status & ICOM_RI) ? TIOCM_RNG : 0) 984 | ((status & ICOM_DSR) ? TIOCM_DSR : 0) 985 | ((status & ICOM_CTS) ? TIOCM_CTS : 0); 986 return result; 987 } 988 989 static void icom_stop_tx(struct uart_port *port) 990 { 991 unsigned char cmdReg; 992 993 trace(ICOM_PORT, "STOP", 0); 994 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 995 writeb(cmdReg | CMD_HOLD_XMIT, &ICOM_PORT->dram->CmdReg); 996 } 997 998 static void icom_start_tx(struct uart_port *port) 999 { 1000 unsigned char cmdReg; 1001 1002 trace(ICOM_PORT, "START", 0); 1003 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 1004 if ((cmdReg & CMD_HOLD_XMIT) == CMD_HOLD_XMIT) 1005 writeb(cmdReg & ~CMD_HOLD_XMIT, 1006 &ICOM_PORT->dram->CmdReg); 1007 1008 icom_write(port); 1009 } 1010 1011 static void icom_send_xchar(struct uart_port *port, char ch) 1012 { 1013 unsigned char xdata; 1014 int index; 1015 unsigned long flags; 1016 1017 trace(ICOM_PORT, "SEND_XCHAR", ch); 1018 1019 /* wait .1 sec to send char */ 1020 for (index = 0; index < 10; index++) { 1021 spin_lock_irqsave(&port->lock, flags); 1022 xdata = readb(&ICOM_PORT->dram->xchar); 1023 if (xdata == 0x00) { 1024 trace(ICOM_PORT, "QUICK_WRITE", 0); 1025 writeb(ch, &ICOM_PORT->dram->xchar); 1026 1027 /* flush write operation */ 1028 xdata = readb(&ICOM_PORT->dram->xchar); 1029 spin_unlock_irqrestore(&port->lock, flags); 1030 break; 1031 } 1032 spin_unlock_irqrestore(&port->lock, flags); 1033 msleep(10); 1034 } 1035 } 1036 1037 static void icom_stop_rx(struct uart_port *port) 1038 { 1039 unsigned char cmdReg; 1040 1041 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 1042 writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); 1043 } 1044 1045 static void icom_enable_ms(struct uart_port *port) 1046 { 1047 /* no-op */ 1048 } 1049 1050 static void icom_break(struct uart_port *port, int break_state) 1051 { 1052 unsigned char cmdReg; 1053 unsigned long flags; 1054 1055 spin_lock_irqsave(&port->lock, flags); 1056 trace(ICOM_PORT, "BREAK", 0); 1057 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 1058 if (break_state == -1) { 1059 writeb(cmdReg | CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); 1060 } else { 1061 writeb(cmdReg & ~CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); 1062 } 1063 spin_unlock_irqrestore(&port->lock, flags); 1064 } 1065 1066 static int icom_open(struct uart_port *port) 1067 { 1068 int retval; 1069 1070 kref_get(&ICOM_PORT->adapter->kref); 1071 retval = startup(ICOM_PORT); 1072 1073 if (retval) { 1074 kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); 1075 trace(ICOM_PORT, "STARTUP_ERROR", 0); 1076 return retval; 1077 } 1078 1079 return 0; 1080 } 1081 1082 static void icom_close(struct uart_port *port) 1083 { 1084 unsigned char cmdReg; 1085 1086 trace(ICOM_PORT, "CLOSE", 0); 1087 1088 /* stop receiver */ 1089 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 1090 writeb(cmdReg & (unsigned char) ~CMD_RCV_ENABLE, 1091 &ICOM_PORT->dram->CmdReg); 1092 1093 shutdown(ICOM_PORT); 1094 1095 kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); 1096 } 1097 1098 static void icom_set_termios(struct uart_port *port, 1099 struct ktermios *termios, 1100 struct ktermios *old_termios) 1101 { 1102 int baud; 1103 unsigned cflag, iflag; 1104 char new_config2; 1105 char new_config3 = 0; 1106 char tmp_byte; 1107 int index; 1108 int rcv_buff, xmit_buff; 1109 unsigned long offset; 1110 unsigned long flags; 1111 1112 spin_lock_irqsave(&port->lock, flags); 1113 trace(ICOM_PORT, "CHANGE_SPEED", 0); 1114 1115 cflag = termios->c_cflag; 1116 iflag = termios->c_iflag; 1117 1118 new_config2 = ICOM_ACFG_DRIVE1; 1119 1120 /* byte size and parity */ 1121 switch (cflag & CSIZE) { 1122 case CS5: /* 5 bits/char */ 1123 new_config2 |= ICOM_ACFG_5BPC; 1124 break; 1125 case CS6: /* 6 bits/char */ 1126 new_config2 |= ICOM_ACFG_6BPC; 1127 break; 1128 case CS7: /* 7 bits/char */ 1129 new_config2 |= ICOM_ACFG_7BPC; 1130 break; 1131 case CS8: /* 8 bits/char */ 1132 new_config2 |= ICOM_ACFG_8BPC; 1133 break; 1134 default: 1135 break; 1136 } 1137 if (cflag & CSTOPB) { 1138 /* 2 stop bits */ 1139 new_config2 |= ICOM_ACFG_2STOP_BIT; 1140 } 1141 if (cflag & PARENB) { 1142 /* parity bit enabled */ 1143 new_config2 |= ICOM_ACFG_PARITY_ENAB; 1144 trace(ICOM_PORT, "PARENB", 0); 1145 } 1146 if (cflag & PARODD) { 1147 /* odd parity */ 1148 new_config2 |= ICOM_ACFG_PARITY_ODD; 1149 trace(ICOM_PORT, "PARODD", 0); 1150 } 1151 1152 /* Determine divisor based on baud rate */ 1153 baud = uart_get_baud_rate(port, termios, old_termios, 1154 icom_acfg_baud[0], 1155 icom_acfg_baud[BAUD_TABLE_LIMIT]); 1156 if (!baud) 1157 baud = 9600; /* B0 transition handled in rs_set_termios */ 1158 1159 for (index = 0; index < BAUD_TABLE_LIMIT; index++) { 1160 if (icom_acfg_baud[index] == baud) { 1161 new_config3 = index; 1162 break; 1163 } 1164 } 1165 1166 uart_update_timeout(port, cflag, baud); 1167 1168 /* CTS flow control flag and modem status interrupts */ 1169 tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); 1170 if (cflag & CRTSCTS) 1171 tmp_byte |= HDLC_HDW_FLOW; 1172 else 1173 tmp_byte &= ~HDLC_HDW_FLOW; 1174 writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); 1175 1176 /* 1177 * Set up parity check flag 1178 */ 1179 ICOM_PORT->read_status_mask = SA_FLAGS_OVERRUN | SA_FL_RCV_DONE; 1180 if (iflag & INPCK) 1181 ICOM_PORT->read_status_mask |= 1182 SA_FLAGS_FRAME_ERROR | SA_FLAGS_PARITY_ERROR; 1183 1184 if ((iflag & BRKINT) || (iflag & PARMRK)) 1185 ICOM_PORT->read_status_mask |= SA_FLAGS_BREAK_DET; 1186 1187 /* 1188 * Characters to ignore 1189 */ 1190 ICOM_PORT->ignore_status_mask = 0; 1191 if (iflag & IGNPAR) 1192 ICOM_PORT->ignore_status_mask |= 1193 SA_FLAGS_PARITY_ERROR | SA_FLAGS_FRAME_ERROR; 1194 if (iflag & IGNBRK) { 1195 ICOM_PORT->ignore_status_mask |= SA_FLAGS_BREAK_DET; 1196 /* 1197 * If we're ignore parity and break indicators, ignore 1198 * overruns too. (For real raw support). 1199 */ 1200 if (iflag & IGNPAR) 1201 ICOM_PORT->ignore_status_mask |= SA_FLAGS_OVERRUN; 1202 } 1203 1204 /* 1205 * !!! ignore all characters if CREAD is not set 1206 */ 1207 if ((cflag & CREAD) == 0) 1208 ICOM_PORT->ignore_status_mask |= SA_FL_RCV_DONE; 1209 1210 /* Turn off Receiver to prepare for reset */ 1211 writeb(CMD_RCV_DISABLE, &ICOM_PORT->dram->CmdReg); 1212 1213 for (index = 0; index < 10; index++) { 1214 if (readb(&ICOM_PORT->dram->PrevCmdReg) == 0x00) { 1215 break; 1216 } 1217 } 1218 1219 /* clear all current buffers of data */ 1220 for (rcv_buff = 0; rcv_buff < NUM_RBUFFS; rcv_buff++) { 1221 ICOM_PORT->statStg->rcv[rcv_buff].flags = 0; 1222 ICOM_PORT->statStg->rcv[rcv_buff].leLength = 0; 1223 ICOM_PORT->statStg->rcv[rcv_buff].WorkingLength = 1224 (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); 1225 } 1226 1227 for (xmit_buff = 0; xmit_buff < NUM_XBUFFS; xmit_buff++) { 1228 ICOM_PORT->statStg->xmit[xmit_buff].flags = 0; 1229 } 1230 1231 /* activate changes and start xmit and receiver here */ 1232 /* Enable the receiver */ 1233 writeb(new_config3, &(ICOM_PORT->dram->async_config3)); 1234 writeb(new_config2, &(ICOM_PORT->dram->async_config2)); 1235 tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); 1236 tmp_byte |= HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL; 1237 writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); 1238 writeb(0x04, &(ICOM_PORT->dram->FlagFillIdleTimer)); /* 0.5 seconds */ 1239 writeb(0xFF, &(ICOM_PORT->dram->ier)); /* enable modem signal interrupts */ 1240 1241 /* reset processor */ 1242 writeb(CMD_RESTART, &ICOM_PORT->dram->CmdReg); 1243 1244 for (index = 0; index < 10; index++) { 1245 if (readb(&ICOM_PORT->dram->CmdReg) == 0x00) { 1246 break; 1247 } 1248 } 1249 1250 /* Enable Transmitter and Receiver */ 1251 offset = 1252 (unsigned long) &ICOM_PORT->statStg->rcv[0] - 1253 (unsigned long) ICOM_PORT->statStg; 1254 writel(ICOM_PORT->statStg_pci + offset, 1255 &ICOM_PORT->dram->RcvStatusAddr); 1256 ICOM_PORT->next_rcv = 0; 1257 ICOM_PORT->put_length = 0; 1258 *ICOM_PORT->xmitRestart = 0; 1259 writel(ICOM_PORT->xmitRestart_pci, 1260 &ICOM_PORT->dram->XmitStatusAddr); 1261 trace(ICOM_PORT, "XR_ENAB", 0); 1262 writeb(CMD_XMIT_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); 1263 1264 spin_unlock_irqrestore(&port->lock, flags); 1265 } 1266 1267 static const char *icom_type(struct uart_port *port) 1268 { 1269 return "icom"; 1270 } 1271 1272 static void icom_release_port(struct uart_port *port) 1273 { 1274 } 1275 1276 static int icom_request_port(struct uart_port *port) 1277 { 1278 return 0; 1279 } 1280 1281 static void icom_config_port(struct uart_port *port, int flags) 1282 { 1283 port->type = PORT_ICOM; 1284 } 1285 1286 static struct uart_ops icom_ops = { 1287 .tx_empty = icom_tx_empty, 1288 .set_mctrl = icom_set_mctrl, 1289 .get_mctrl = icom_get_mctrl, 1290 .stop_tx = icom_stop_tx, 1291 .start_tx = icom_start_tx, 1292 .send_xchar = icom_send_xchar, 1293 .stop_rx = icom_stop_rx, 1294 .enable_ms = icom_enable_ms, 1295 .break_ctl = icom_break, 1296 .startup = icom_open, 1297 .shutdown = icom_close, 1298 .set_termios = icom_set_termios, 1299 .type = icom_type, 1300 .release_port = icom_release_port, 1301 .request_port = icom_request_port, 1302 .config_port = icom_config_port, 1303 }; 1304 1305 #define ICOM_CONSOLE NULL 1306 1307 static struct uart_driver icom_uart_driver = { 1308 .owner = THIS_MODULE, 1309 .driver_name = ICOM_DRIVER_NAME, 1310 .dev_name = "ttyA", 1311 .major = ICOM_MAJOR, 1312 .minor = ICOM_MINOR_START, 1313 .nr = NR_PORTS, 1314 .cons = ICOM_CONSOLE, 1315 }; 1316 1317 static int __devinit icom_init_ports(struct icom_adapter *icom_adapter) 1318 { 1319 u32 subsystem_id = icom_adapter->subsystem_id; 1320 int i; 1321 struct icom_port *icom_port; 1322 1323 if (icom_adapter->version == ADAPTER_V1) { 1324 icom_adapter->numb_ports = 2; 1325 1326 for (i = 0; i < 2; i++) { 1327 icom_port = &icom_adapter->port_info[i]; 1328 icom_port->port = i; 1329 icom_port->status = ICOM_PORT_ACTIVE; 1330 icom_port->imbed_modem = ICOM_UNKNOWN; 1331 } 1332 } else { 1333 if (subsystem_id == PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL) { 1334 icom_adapter->numb_ports = 4; 1335 1336 for (i = 0; i < 4; i++) { 1337 icom_port = &icom_adapter->port_info[i]; 1338 1339 icom_port->port = i; 1340 icom_port->status = ICOM_PORT_ACTIVE; 1341 icom_port->imbed_modem = ICOM_IMBED_MODEM; 1342 } 1343 } else { 1344 icom_adapter->numb_ports = 4; 1345 1346 icom_adapter->port_info[0].port = 0; 1347 icom_adapter->port_info[0].status = ICOM_PORT_ACTIVE; 1348 1349 if (subsystem_id == 1350 PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM) { 1351 icom_adapter->port_info[0].imbed_modem = ICOM_IMBED_MODEM; 1352 } else { 1353 icom_adapter->port_info[0].imbed_modem = ICOM_RVX; 1354 } 1355 1356 icom_adapter->port_info[1].status = ICOM_PORT_OFF; 1357 1358 icom_adapter->port_info[2].port = 2; 1359 icom_adapter->port_info[2].status = ICOM_PORT_ACTIVE; 1360 icom_adapter->port_info[2].imbed_modem = ICOM_RVX; 1361 icom_adapter->port_info[3].status = ICOM_PORT_OFF; 1362 } 1363 } 1364 1365 return 0; 1366 } 1367 1368 static void icom_port_active(struct icom_port *icom_port, struct icom_adapter *icom_adapter, int port_num) 1369 { 1370 if (icom_adapter->version == ADAPTER_V1) { 1371 icom_port->global_reg = icom_adapter->base_addr + 0x4000; 1372 icom_port->int_reg = icom_adapter->base_addr + 1373 0x4004 + 2 - 2 * port_num; 1374 } else { 1375 icom_port->global_reg = icom_adapter->base_addr + 0x8000; 1376 if (icom_port->port < 2) 1377 icom_port->int_reg = icom_adapter->base_addr + 1378 0x8004 + 2 - 2 * icom_port->port; 1379 else 1380 icom_port->int_reg = icom_adapter->base_addr + 1381 0x8024 + 2 - 2 * (icom_port->port - 2); 1382 } 1383 } 1384 static int __devinit icom_load_ports(struct icom_adapter *icom_adapter) 1385 { 1386 struct icom_port *icom_port; 1387 int port_num; 1388 1389 for (port_num = 0; port_num < icom_adapter->numb_ports; port_num++) { 1390 1391 icom_port = &icom_adapter->port_info[port_num]; 1392 1393 if (icom_port->status == ICOM_PORT_ACTIVE) { 1394 icom_port_active(icom_port, icom_adapter, port_num); 1395 icom_port->dram = icom_adapter->base_addr + 1396 0x2000 * icom_port->port; 1397 1398 icom_port->adapter = icom_adapter; 1399 1400 /* get port memory */ 1401 if (get_port_memory(icom_port) != 0) { 1402 dev_err(&icom_port->adapter->pci_dev->dev, 1403 "Memory allocation for port FAILED\n"); 1404 } 1405 } 1406 } 1407 return 0; 1408 } 1409 1410 static int __devinit icom_alloc_adapter(struct icom_adapter 1411 **icom_adapter_ref) 1412 { 1413 int adapter_count = 0; 1414 struct icom_adapter *icom_adapter; 1415 struct icom_adapter *cur_adapter_entry; 1416 struct list_head *tmp; 1417 1418 icom_adapter = (struct icom_adapter *) 1419 kzalloc(sizeof(struct icom_adapter), GFP_KERNEL); 1420 1421 if (!icom_adapter) { 1422 return -ENOMEM; 1423 } 1424 1425 list_for_each(tmp, &icom_adapter_head) { 1426 cur_adapter_entry = 1427 list_entry(tmp, struct icom_adapter, 1428 icom_adapter_entry); 1429 if (cur_adapter_entry->index != adapter_count) { 1430 break; 1431 } 1432 adapter_count++; 1433 } 1434 1435 icom_adapter->index = adapter_count; 1436 list_add_tail(&icom_adapter->icom_adapter_entry, tmp); 1437 1438 *icom_adapter_ref = icom_adapter; 1439 return 0; 1440 } 1441 1442 static void icom_free_adapter(struct icom_adapter *icom_adapter) 1443 { 1444 list_del(&icom_adapter->icom_adapter_entry); 1445 kfree(icom_adapter); 1446 } 1447 1448 static void icom_remove_adapter(struct icom_adapter *icom_adapter) 1449 { 1450 struct icom_port *icom_port; 1451 int index; 1452 1453 for (index = 0; index < icom_adapter->numb_ports; index++) { 1454 icom_port = &icom_adapter->port_info[index]; 1455 1456 if (icom_port->status == ICOM_PORT_ACTIVE) { 1457 dev_info(&icom_adapter->pci_dev->dev, 1458 "Device removed\n"); 1459 1460 uart_remove_one_port(&icom_uart_driver, 1461 &icom_port->uart_port); 1462 1463 /* be sure that DTR and RTS are dropped */ 1464 writeb(0x00, &icom_port->dram->osr); 1465 1466 /* Wait 0.1 Sec for simple Init to complete */ 1467 msleep(100); 1468 1469 /* Stop proccessor */ 1470 stop_processor(icom_port); 1471 1472 free_port_memory(icom_port); 1473 } 1474 } 1475 1476 free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter); 1477 iounmap(icom_adapter->base_addr); 1478 pci_release_regions(icom_adapter->pci_dev); 1479 icom_free_adapter(icom_adapter); 1480 } 1481 1482 static void icom_kref_release(struct kref *kref) 1483 { 1484 struct icom_adapter *icom_adapter; 1485 1486 icom_adapter = to_icom_adapter(kref); 1487 icom_remove_adapter(icom_adapter); 1488 } 1489 1490 static int __devinit icom_probe(struct pci_dev *dev, 1491 const struct pci_device_id *ent) 1492 { 1493 int index; 1494 unsigned int command_reg; 1495 int retval; 1496 struct icom_adapter *icom_adapter; 1497 struct icom_port *icom_port; 1498 1499 retval = pci_enable_device(dev); 1500 if (retval) { 1501 dev_err(&dev->dev, "Device enable FAILED\n"); 1502 return retval; 1503 } 1504 1505 if ( (retval = pci_request_regions(dev, "icom"))) { 1506 dev_err(&dev->dev, "pci_request_regions FAILED\n"); 1507 pci_disable_device(dev); 1508 return retval; 1509 } 1510 1511 pci_set_master(dev); 1512 1513 if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) { 1514 dev_err(&dev->dev, "PCI Config read FAILED\n"); 1515 return retval; 1516 } 1517 1518 pci_write_config_dword(dev, PCI_COMMAND, 1519 command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER 1520 | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); 1521 1522 if (ent->driver_data == ADAPTER_V1) { 1523 pci_write_config_dword(dev, 0x44, 0x8300830A); 1524 } else { 1525 pci_write_config_dword(dev, 0x44, 0x42004200); 1526 pci_write_config_dword(dev, 0x48, 0x42004200); 1527 } 1528 1529 1530 retval = icom_alloc_adapter(&icom_adapter); 1531 if (retval) { 1532 dev_err(&dev->dev, "icom_alloc_adapter FAILED\n"); 1533 retval = -EIO; 1534 goto probe_exit0; 1535 } 1536 1537 icom_adapter->base_addr_pci = pci_resource_start(dev, 0); 1538 icom_adapter->pci_dev = dev; 1539 icom_adapter->version = ent->driver_data; 1540 icom_adapter->subsystem_id = ent->subdevice; 1541 1542 1543 retval = icom_init_ports(icom_adapter); 1544 if (retval) { 1545 dev_err(&dev->dev, "Port configuration failed\n"); 1546 goto probe_exit1; 1547 } 1548 1549 icom_adapter->base_addr = pci_ioremap_bar(dev, 0); 1550 1551 if (!icom_adapter->base_addr) 1552 goto probe_exit1; 1553 1554 /* save off irq and request irq line */ 1555 if ( (retval = request_irq(dev->irq, icom_interrupt, 1556 IRQF_SHARED, ICOM_DRIVER_NAME, 1557 (void *) icom_adapter))) { 1558 goto probe_exit2; 1559 } 1560 1561 retval = icom_load_ports(icom_adapter); 1562 1563 for (index = 0; index < icom_adapter->numb_ports; index++) { 1564 icom_port = &icom_adapter->port_info[index]; 1565 1566 if (icom_port->status == ICOM_PORT_ACTIVE) { 1567 icom_port->uart_port.irq = icom_port->adapter->pci_dev->irq; 1568 icom_port->uart_port.type = PORT_ICOM; 1569 icom_port->uart_port.iotype = UPIO_MEM; 1570 icom_port->uart_port.membase = 1571 (char *) icom_adapter->base_addr_pci; 1572 icom_port->uart_port.fifosize = 16; 1573 icom_port->uart_port.ops = &icom_ops; 1574 icom_port->uart_port.line = 1575 icom_port->port + icom_adapter->index * 4; 1576 if (uart_add_one_port (&icom_uart_driver, &icom_port->uart_port)) { 1577 icom_port->status = ICOM_PORT_OFF; 1578 dev_err(&dev->dev, "Device add failed\n"); 1579 } else 1580 dev_info(&dev->dev, "Device added\n"); 1581 } 1582 } 1583 1584 kref_init(&icom_adapter->kref); 1585 return 0; 1586 1587 probe_exit2: 1588 iounmap(icom_adapter->base_addr); 1589 probe_exit1: 1590 icom_free_adapter(icom_adapter); 1591 1592 probe_exit0: 1593 pci_release_regions(dev); 1594 pci_disable_device(dev); 1595 1596 return retval; 1597 } 1598 1599 static void __devexit icom_remove(struct pci_dev *dev) 1600 { 1601 struct icom_adapter *icom_adapter; 1602 struct list_head *tmp; 1603 1604 list_for_each(tmp, &icom_adapter_head) { 1605 icom_adapter = list_entry(tmp, struct icom_adapter, 1606 icom_adapter_entry); 1607 if (icom_adapter->pci_dev == dev) { 1608 kref_put(&icom_adapter->kref, icom_kref_release); 1609 return; 1610 } 1611 } 1612 1613 dev_err(&dev->dev, "Unable to find device to remove\n"); 1614 } 1615 1616 static struct pci_driver icom_pci_driver = { 1617 .name = ICOM_DRIVER_NAME, 1618 .id_table = icom_pci_table, 1619 .probe = icom_probe, 1620 .remove = __devexit_p(icom_remove), 1621 }; 1622 1623 static int __init icom_init(void) 1624 { 1625 int ret; 1626 1627 spin_lock_init(&icom_lock); 1628 1629 ret = uart_register_driver(&icom_uart_driver); 1630 if (ret) 1631 return ret; 1632 1633 ret = pci_register_driver(&icom_pci_driver); 1634 1635 if (ret < 0) 1636 uart_unregister_driver(&icom_uart_driver); 1637 1638 return ret; 1639 } 1640 1641 static void __exit icom_exit(void) 1642 { 1643 pci_unregister_driver(&icom_pci_driver); 1644 uart_unregister_driver(&icom_uart_driver); 1645 } 1646 1647 module_init(icom_init); 1648 module_exit(icom_exit); 1649 1650 MODULE_AUTHOR("Michael Anderson <mjanders@us.ibm.com>"); 1651 MODULE_DESCRIPTION("IBM iSeries Serial IOA driver"); 1652 MODULE_SUPPORTED_DEVICE 1653 ("IBM iSeries 2745, 2771, 2772, 2742, 2793 and 2805 Communications adapters"); 1654 MODULE_LICENSE("GPL"); 1655 MODULE_FIRMWARE("icom_call_setup.bin"); 1656 MODULE_FIRMWARE("icom_res_dce.bin"); 1657 MODULE_FIRMWARE("icom_asc.bin"); 1658