1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * icom.c 4 * 5 * Copyright (C) 2001 IBM Corporation. All rights reserved. 6 * 7 * Serial device driver. 8 * 9 * Based on code from serial.c 10 */ 11 #include <linux/module.h> 12 #include <linux/kernel.h> 13 #include <linux/errno.h> 14 #include <linux/signal.h> 15 #include <linux/timer.h> 16 #include <linux/interrupt.h> 17 #include <linux/tty.h> 18 #include <linux/termios.h> 19 #include <linux/fs.h> 20 #include <linux/tty_flip.h> 21 #include <linux/serial.h> 22 #include <linux/serial_reg.h> 23 #include <linux/major.h> 24 #include <linux/string.h> 25 #include <linux/fcntl.h> 26 #include <linux/ptrace.h> 27 #include <linux/ioport.h> 28 #include <linux/mm.h> 29 #include <linux/slab.h> 30 #include <linux/init.h> 31 #include <linux/delay.h> 32 #include <linux/pci.h> 33 #include <linux/vmalloc.h> 34 #include <linux/smp.h> 35 #include <linux/spinlock.h> 36 #include <linux/kref.h> 37 #include <linux/firmware.h> 38 #include <linux/bitops.h> 39 40 #include <asm/io.h> 41 #include <asm/irq.h> 42 #include <linux/uaccess.h> 43 44 #include "icom.h" 45 46 /*#define ICOM_TRACE enable port trace capabilities */ 47 48 #define ICOM_DRIVER_NAME "icom" 49 #define ICOM_VERSION_STR "1.3.1" 50 #define NR_PORTS 128 51 #define ICOM_PORT ((struct icom_port *)port) 52 #define to_icom_adapter(d) container_of(d, struct icom_adapter, kref) 53 54 static const struct pci_device_id icom_pci_table[] = { 55 { 56 .vendor = PCI_VENDOR_ID_IBM, 57 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1, 58 .subvendor = PCI_ANY_ID, 59 .subdevice = PCI_ANY_ID, 60 .driver_data = ADAPTER_V1, 61 }, 62 { 63 .vendor = PCI_VENDOR_ID_IBM, 64 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 65 .subvendor = PCI_VENDOR_ID_IBM, 66 .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX, 67 .driver_data = ADAPTER_V2, 68 }, 69 { 70 .vendor = PCI_VENDOR_ID_IBM, 71 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 72 .subvendor = PCI_VENDOR_ID_IBM, 73 .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM, 74 .driver_data = ADAPTER_V2, 75 }, 76 { 77 .vendor = PCI_VENDOR_ID_IBM, 78 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 79 .subvendor = PCI_VENDOR_ID_IBM, 80 .subdevice = PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL, 81 .driver_data = ADAPTER_V2, 82 }, 83 { 84 .vendor = PCI_VENDOR_ID_IBM, 85 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 86 .subvendor = PCI_VENDOR_ID_IBM, 87 .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE, 88 .driver_data = ADAPTER_V2, 89 }, 90 {} 91 }; 92 93 static struct lookup_proc_table start_proc[4] = { 94 {NULL, ICOM_CONTROL_START_A}, 95 {NULL, ICOM_CONTROL_START_B}, 96 {NULL, ICOM_CONTROL_START_C}, 97 {NULL, ICOM_CONTROL_START_D} 98 }; 99 100 101 static struct lookup_proc_table stop_proc[4] = { 102 {NULL, ICOM_CONTROL_STOP_A}, 103 {NULL, ICOM_CONTROL_STOP_B}, 104 {NULL, ICOM_CONTROL_STOP_C}, 105 {NULL, ICOM_CONTROL_STOP_D} 106 }; 107 108 static struct lookup_int_table int_mask_tbl[4] = { 109 {NULL, ICOM_INT_MASK_PRC_A}, 110 {NULL, ICOM_INT_MASK_PRC_B}, 111 {NULL, ICOM_INT_MASK_PRC_C}, 112 {NULL, ICOM_INT_MASK_PRC_D}, 113 }; 114 115 116 MODULE_DEVICE_TABLE(pci, icom_pci_table); 117 118 static LIST_HEAD(icom_adapter_head); 119 120 /* spinlock for adapter initialization and changing adapter operations */ 121 static spinlock_t icom_lock; 122 123 #ifdef ICOM_TRACE 124 static inline void trace(struct icom_port *icom_port, char *trace_pt, 125 unsigned long trace_data) 126 { 127 dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n", 128 icom_port->port, trace_pt, trace_data); 129 } 130 #else 131 static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {}; 132 #endif 133 static void icom_kref_release(struct kref *kref); 134 135 static void free_port_memory(struct icom_port *icom_port) 136 { 137 struct pci_dev *dev = icom_port->adapter->pci_dev; 138 139 trace(icom_port, "RET_PORT_MEM", 0); 140 if (icom_port->recv_buf) { 141 pci_free_consistent(dev, 4096, icom_port->recv_buf, 142 icom_port->recv_buf_pci); 143 icom_port->recv_buf = NULL; 144 } 145 if (icom_port->xmit_buf) { 146 pci_free_consistent(dev, 4096, icom_port->xmit_buf, 147 icom_port->xmit_buf_pci); 148 icom_port->xmit_buf = NULL; 149 } 150 if (icom_port->statStg) { 151 pci_free_consistent(dev, 4096, icom_port->statStg, 152 icom_port->statStg_pci); 153 icom_port->statStg = NULL; 154 } 155 156 if (icom_port->xmitRestart) { 157 pci_free_consistent(dev, 4096, icom_port->xmitRestart, 158 icom_port->xmitRestart_pci); 159 icom_port->xmitRestart = NULL; 160 } 161 } 162 163 static int get_port_memory(struct icom_port *icom_port) 164 { 165 int index; 166 unsigned long stgAddr; 167 unsigned long startStgAddr; 168 unsigned long offset; 169 struct pci_dev *dev = icom_port->adapter->pci_dev; 170 171 icom_port->xmit_buf = 172 pci_alloc_consistent(dev, 4096, &icom_port->xmit_buf_pci); 173 if (!icom_port->xmit_buf) { 174 dev_err(&dev->dev, "Can not allocate Transmit buffer\n"); 175 return -ENOMEM; 176 } 177 178 trace(icom_port, "GET_PORT_MEM", 179 (unsigned long) icom_port->xmit_buf); 180 181 icom_port->recv_buf = 182 pci_alloc_consistent(dev, 4096, &icom_port->recv_buf_pci); 183 if (!icom_port->recv_buf) { 184 dev_err(&dev->dev, "Can not allocate Receive buffer\n"); 185 free_port_memory(icom_port); 186 return -ENOMEM; 187 } 188 trace(icom_port, "GET_PORT_MEM", 189 (unsigned long) icom_port->recv_buf); 190 191 icom_port->statStg = 192 pci_alloc_consistent(dev, 4096, &icom_port->statStg_pci); 193 if (!icom_port->statStg) { 194 dev_err(&dev->dev, "Can not allocate Status buffer\n"); 195 free_port_memory(icom_port); 196 return -ENOMEM; 197 } 198 trace(icom_port, "GET_PORT_MEM", 199 (unsigned long) icom_port->statStg); 200 201 icom_port->xmitRestart = 202 pci_alloc_consistent(dev, 4096, &icom_port->xmitRestart_pci); 203 if (!icom_port->xmitRestart) { 204 dev_err(&dev->dev, 205 "Can not allocate xmit Restart buffer\n"); 206 free_port_memory(icom_port); 207 return -ENOMEM; 208 } 209 210 memset(icom_port->statStg, 0, 4096); 211 212 /* FODs: Frame Out Descriptor Queue, this is a FIFO queue that 213 indicates that frames are to be transmitted 214 */ 215 216 stgAddr = (unsigned long) icom_port->statStg; 217 for (index = 0; index < NUM_XBUFFS; index++) { 218 trace(icom_port, "FOD_ADDR", stgAddr); 219 stgAddr = stgAddr + sizeof(icom_port->statStg->xmit[0]); 220 if (index < (NUM_XBUFFS - 1)) { 221 memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); 222 icom_port->statStg->xmit[index].leLengthASD = 223 (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); 224 trace(icom_port, "FOD_ADDR", stgAddr); 225 trace(icom_port, "FOD_XBUFF", 226 (unsigned long) icom_port->xmit_buf); 227 icom_port->statStg->xmit[index].leBuffer = 228 cpu_to_le32(icom_port->xmit_buf_pci); 229 } else if (index == (NUM_XBUFFS - 1)) { 230 memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); 231 icom_port->statStg->xmit[index].leLengthASD = 232 (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); 233 trace(icom_port, "FOD_XBUFF", 234 (unsigned long) icom_port->xmit_buf); 235 icom_port->statStg->xmit[index].leBuffer = 236 cpu_to_le32(icom_port->xmit_buf_pci); 237 } else { 238 memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); 239 } 240 } 241 /* FIDs */ 242 startStgAddr = stgAddr; 243 244 /* fill in every entry, even if no buffer */ 245 for (index = 0; index < NUM_RBUFFS; index++) { 246 trace(icom_port, "FID_ADDR", stgAddr); 247 stgAddr = stgAddr + sizeof(icom_port->statStg->rcv[0]); 248 icom_port->statStg->rcv[index].leLength = 0; 249 icom_port->statStg->rcv[index].WorkingLength = 250 (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); 251 if (index < (NUM_RBUFFS - 1) ) { 252 offset = stgAddr - (unsigned long) icom_port->statStg; 253 icom_port->statStg->rcv[index].leNext = 254 cpu_to_le32(icom_port-> statStg_pci + offset); 255 trace(icom_port, "FID_RBUFF", 256 (unsigned long) icom_port->recv_buf); 257 icom_port->statStg->rcv[index].leBuffer = 258 cpu_to_le32(icom_port->recv_buf_pci); 259 } else if (index == (NUM_RBUFFS -1) ) { 260 offset = startStgAddr - (unsigned long) icom_port->statStg; 261 icom_port->statStg->rcv[index].leNext = 262 cpu_to_le32(icom_port-> statStg_pci + offset); 263 trace(icom_port, "FID_RBUFF", 264 (unsigned long) icom_port->recv_buf + 2048); 265 icom_port->statStg->rcv[index].leBuffer = 266 cpu_to_le32(icom_port->recv_buf_pci + 2048); 267 } else { 268 icom_port->statStg->rcv[index].leNext = 0; 269 icom_port->statStg->rcv[index].leBuffer = 0; 270 } 271 } 272 273 return 0; 274 } 275 276 static void stop_processor(struct icom_port *icom_port) 277 { 278 unsigned long temp; 279 unsigned long flags; 280 int port; 281 282 spin_lock_irqsave(&icom_lock, flags); 283 284 port = icom_port->port; 285 if (port >= ARRAY_SIZE(stop_proc)) { 286 dev_err(&icom_port->adapter->pci_dev->dev, 287 "Invalid port assignment\n"); 288 goto unlock; 289 } 290 291 if (port == 0 || port == 1) 292 stop_proc[port].global_control_reg = &icom_port->global_reg->control; 293 else 294 stop_proc[port].global_control_reg = &icom_port->global_reg->control_2; 295 296 temp = readl(stop_proc[port].global_control_reg); 297 temp = (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id; 298 writel(temp, stop_proc[port].global_control_reg); 299 300 /* write flush */ 301 readl(stop_proc[port].global_control_reg); 302 303 unlock: 304 spin_unlock_irqrestore(&icom_lock, flags); 305 } 306 307 static void start_processor(struct icom_port *icom_port) 308 { 309 unsigned long temp; 310 unsigned long flags; 311 int port; 312 313 spin_lock_irqsave(&icom_lock, flags); 314 315 port = icom_port->port; 316 if (port >= ARRAY_SIZE(start_proc)) { 317 dev_err(&icom_port->adapter->pci_dev->dev, 318 "Invalid port assignment\n"); 319 goto unlock; 320 } 321 322 if (port == 0 || port == 1) 323 start_proc[port].global_control_reg = &icom_port->global_reg->control; 324 else 325 start_proc[port].global_control_reg = &icom_port->global_reg->control_2; 326 327 temp = readl(start_proc[port].global_control_reg); 328 temp = (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id; 329 writel(temp, start_proc[port].global_control_reg); 330 331 /* write flush */ 332 readl(start_proc[port].global_control_reg); 333 334 unlock: 335 spin_unlock_irqrestore(&icom_lock, flags); 336 } 337 338 static void load_code(struct icom_port *icom_port) 339 { 340 const struct firmware *fw; 341 char __iomem *iram_ptr; 342 int index; 343 int status = 0; 344 void __iomem *dram_ptr = icom_port->dram; 345 dma_addr_t temp_pci; 346 unsigned char *new_page = NULL; 347 unsigned char cable_id = NO_CABLE; 348 struct pci_dev *dev = icom_port->adapter->pci_dev; 349 350 /* Clear out any pending interrupts */ 351 writew(0x3FFF, icom_port->int_reg); 352 353 trace(icom_port, "CLEAR_INTERRUPTS", 0); 354 355 /* Stop processor */ 356 stop_processor(icom_port); 357 358 /* Zero out DRAM */ 359 memset_io(dram_ptr, 0, 512); 360 361 /* Load Call Setup into Adapter */ 362 if (request_firmware(&fw, "icom_call_setup.bin", &dev->dev) < 0) { 363 dev_err(&dev->dev,"Unable to load icom_call_setup.bin firmware image\n"); 364 status = -1; 365 goto load_code_exit; 366 } 367 368 if (fw->size > ICOM_DCE_IRAM_OFFSET) { 369 dev_err(&dev->dev, "Invalid firmware image for icom_call_setup.bin found.\n"); 370 release_firmware(fw); 371 status = -1; 372 goto load_code_exit; 373 } 374 375 iram_ptr = (char __iomem *)icom_port->dram + ICOM_IRAM_OFFSET; 376 for (index = 0; index < fw->size; index++) 377 writeb(fw->data[index], &iram_ptr[index]); 378 379 release_firmware(fw); 380 381 /* Load Resident DCE portion of Adapter */ 382 if (request_firmware(&fw, "icom_res_dce.bin", &dev->dev) < 0) { 383 dev_err(&dev->dev,"Unable to load icom_res_dce.bin firmware image\n"); 384 status = -1; 385 goto load_code_exit; 386 } 387 388 if (fw->size > ICOM_IRAM_SIZE) { 389 dev_err(&dev->dev, "Invalid firmware image for icom_res_dce.bin found.\n"); 390 release_firmware(fw); 391 status = -1; 392 goto load_code_exit; 393 } 394 395 iram_ptr = (char __iomem *) icom_port->dram + ICOM_IRAM_OFFSET; 396 for (index = ICOM_DCE_IRAM_OFFSET; index < fw->size; index++) 397 writeb(fw->data[index], &iram_ptr[index]); 398 399 release_firmware(fw); 400 401 /* Set Hardware level */ 402 if (icom_port->adapter->version == ADAPTER_V2) 403 writeb(V2_HARDWARE, &(icom_port->dram->misc_flags)); 404 405 /* Start the processor in Adapter */ 406 start_processor(icom_port); 407 408 writeb((HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL), 409 &(icom_port->dram->HDLCConfigReg)); 410 writeb(0x04, &(icom_port->dram->FlagFillIdleTimer)); /* 0.5 seconds */ 411 writeb(0x00, &(icom_port->dram->CmdReg)); 412 writeb(0x10, &(icom_port->dram->async_config3)); 413 writeb((ICOM_ACFG_DRIVE1 | ICOM_ACFG_NO_PARITY | ICOM_ACFG_8BPC | 414 ICOM_ACFG_1STOP_BIT), &(icom_port->dram->async_config2)); 415 416 /*Set up data in icom DRAM to indicate where personality 417 *code is located and its length. 418 */ 419 new_page = pci_alloc_consistent(dev, 4096, &temp_pci); 420 421 if (!new_page) { 422 dev_err(&dev->dev, "Can not allocate DMA buffer\n"); 423 status = -1; 424 goto load_code_exit; 425 } 426 427 if (request_firmware(&fw, "icom_asc.bin", &dev->dev) < 0) { 428 dev_err(&dev->dev,"Unable to load icom_asc.bin firmware image\n"); 429 status = -1; 430 goto load_code_exit; 431 } 432 433 if (fw->size > ICOM_DCE_IRAM_OFFSET) { 434 dev_err(&dev->dev, "Invalid firmware image for icom_asc.bin found.\n"); 435 release_firmware(fw); 436 status = -1; 437 goto load_code_exit; 438 } 439 440 for (index = 0; index < fw->size; index++) 441 new_page[index] = fw->data[index]; 442 443 writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length); 444 writel(temp_pci, &icom_port->dram->mac_load_addr); 445 446 release_firmware(fw); 447 448 /*Setting the syncReg to 0x80 causes adapter to start downloading 449 the personality code into adapter instruction RAM. 450 Once code is loaded, it will begin executing and, based on 451 information provided above, will start DMAing data from 452 shared memory to adapter DRAM. 453 */ 454 /* the wait loop below verifies this write operation has been done 455 and processed 456 */ 457 writeb(START_DOWNLOAD, &icom_port->dram->sync); 458 459 /* Wait max 1 Sec for data download and processor to start */ 460 for (index = 0; index < 10; index++) { 461 msleep(100); 462 if (readb(&icom_port->dram->misc_flags) & ICOM_HDW_ACTIVE) 463 break; 464 } 465 466 if (index == 10) 467 status = -1; 468 469 /* 470 * check Cable ID 471 */ 472 cable_id = readb(&icom_port->dram->cable_id); 473 474 if (cable_id & ICOM_CABLE_ID_VALID) { 475 /* Get cable ID into the lower 4 bits (standard form) */ 476 cable_id = (cable_id & ICOM_CABLE_ID_MASK) >> 4; 477 icom_port->cable_id = cable_id; 478 } else { 479 dev_err(&dev->dev,"Invalid or no cable attached\n"); 480 icom_port->cable_id = NO_CABLE; 481 } 482 483 load_code_exit: 484 485 if (status != 0) { 486 /* Clear out any pending interrupts */ 487 writew(0x3FFF, icom_port->int_reg); 488 489 /* Turn off port */ 490 writeb(ICOM_DISABLE, &(icom_port->dram->disable)); 491 492 /* Stop processor */ 493 stop_processor(icom_port); 494 495 dev_err(&icom_port->adapter->pci_dev->dev,"Port not operational\n"); 496 } 497 498 if (new_page != NULL) 499 pci_free_consistent(dev, 4096, new_page, temp_pci); 500 } 501 502 static int startup(struct icom_port *icom_port) 503 { 504 unsigned long temp; 505 unsigned char cable_id, raw_cable_id; 506 unsigned long flags; 507 int port; 508 509 trace(icom_port, "STARTUP", 0); 510 511 if (!icom_port->dram) { 512 /* should NEVER be NULL */ 513 dev_err(&icom_port->adapter->pci_dev->dev, 514 "Unusable Port, port configuration missing\n"); 515 return -ENODEV; 516 } 517 518 /* 519 * check Cable ID 520 */ 521 raw_cable_id = readb(&icom_port->dram->cable_id); 522 trace(icom_port, "CABLE_ID", raw_cable_id); 523 524 /* Get cable ID into the lower 4 bits (standard form) */ 525 cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; 526 527 /* Check for valid Cable ID */ 528 if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || 529 (cable_id != icom_port->cable_id)) { 530 531 /* reload adapter code, pick up any potential changes in cable id */ 532 load_code(icom_port); 533 534 /* still no sign of cable, error out */ 535 raw_cable_id = readb(&icom_port->dram->cable_id); 536 cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; 537 if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || 538 (icom_port->cable_id == NO_CABLE)) 539 return -EIO; 540 } 541 542 /* 543 * Finally, clear and enable interrupts 544 */ 545 spin_lock_irqsave(&icom_lock, flags); 546 port = icom_port->port; 547 if (port >= ARRAY_SIZE(int_mask_tbl)) { 548 dev_err(&icom_port->adapter->pci_dev->dev, 549 "Invalid port assignment\n"); 550 goto unlock; 551 } 552 553 if (port == 0 || port == 1) 554 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; 555 else 556 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; 557 558 if (port == 0 || port == 2) 559 writew(0x00FF, icom_port->int_reg); 560 else 561 writew(0x3F00, icom_port->int_reg); 562 563 temp = readl(int_mask_tbl[port].global_int_mask); 564 writel(temp & ~int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); 565 566 /* write flush */ 567 readl(int_mask_tbl[port].global_int_mask); 568 569 unlock: 570 spin_unlock_irqrestore(&icom_lock, flags); 571 return 0; 572 } 573 574 static void shutdown(struct icom_port *icom_port) 575 { 576 unsigned long temp; 577 unsigned char cmdReg; 578 unsigned long flags; 579 int port; 580 581 spin_lock_irqsave(&icom_lock, flags); 582 trace(icom_port, "SHUTDOWN", 0); 583 584 /* 585 * disable all interrupts 586 */ 587 port = icom_port->port; 588 if (port >= ARRAY_SIZE(int_mask_tbl)) { 589 dev_err(&icom_port->adapter->pci_dev->dev, 590 "Invalid port assignment\n"); 591 goto unlock; 592 } 593 if (port == 0 || port == 1) 594 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; 595 else 596 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; 597 598 temp = readl(int_mask_tbl[port].global_int_mask); 599 writel(temp | int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); 600 601 /* write flush */ 602 readl(int_mask_tbl[port].global_int_mask); 603 604 unlock: 605 spin_unlock_irqrestore(&icom_lock, flags); 606 607 /* 608 * disable break condition 609 */ 610 cmdReg = readb(&icom_port->dram->CmdReg); 611 if (cmdReg & CMD_SND_BREAK) { 612 writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg); 613 } 614 } 615 616 static int icom_write(struct uart_port *port) 617 { 618 unsigned long data_count; 619 unsigned char cmdReg; 620 unsigned long offset; 621 int temp_tail = port->state->xmit.tail; 622 623 trace(ICOM_PORT, "WRITE", 0); 624 625 if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & 626 SA_FLAGS_READY_TO_XMIT) { 627 trace(ICOM_PORT, "WRITE_FULL", 0); 628 return 0; 629 } 630 631 data_count = 0; 632 while ((port->state->xmit.head != temp_tail) && 633 (data_count <= XMIT_BUFF_SZ)) { 634 635 ICOM_PORT->xmit_buf[data_count++] = 636 port->state->xmit.buf[temp_tail]; 637 638 temp_tail++; 639 temp_tail &= (UART_XMIT_SIZE - 1); 640 } 641 642 if (data_count) { 643 ICOM_PORT->statStg->xmit[0].flags = 644 cpu_to_le16(SA_FLAGS_READY_TO_XMIT); 645 ICOM_PORT->statStg->xmit[0].leLength = 646 cpu_to_le16(data_count); 647 offset = 648 (unsigned long) &ICOM_PORT->statStg->xmit[0] - 649 (unsigned long) ICOM_PORT->statStg; 650 *ICOM_PORT->xmitRestart = 651 cpu_to_le32(ICOM_PORT->statStg_pci + offset); 652 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 653 writeb(cmdReg | CMD_XMIT_RCV_ENABLE, 654 &ICOM_PORT->dram->CmdReg); 655 writeb(START_XMIT, &ICOM_PORT->dram->StartXmitCmd); 656 trace(ICOM_PORT, "WRITE_START", data_count); 657 /* write flush */ 658 readb(&ICOM_PORT->dram->StartXmitCmd); 659 } 660 661 return data_count; 662 } 663 664 static inline void check_modem_status(struct icom_port *icom_port) 665 { 666 static char old_status = 0; 667 char delta_status; 668 unsigned char status; 669 670 spin_lock(&icom_port->uart_port.lock); 671 672 /*modem input register */ 673 status = readb(&icom_port->dram->isr); 674 trace(icom_port, "CHECK_MODEM", status); 675 delta_status = status ^ old_status; 676 if (delta_status) { 677 if (delta_status & ICOM_RI) 678 icom_port->uart_port.icount.rng++; 679 if (delta_status & ICOM_DSR) 680 icom_port->uart_port.icount.dsr++; 681 if (delta_status & ICOM_DCD) 682 uart_handle_dcd_change(&icom_port->uart_port, 683 delta_status & ICOM_DCD); 684 if (delta_status & ICOM_CTS) 685 uart_handle_cts_change(&icom_port->uart_port, 686 delta_status & ICOM_CTS); 687 688 wake_up_interruptible(&icom_port->uart_port.state-> 689 port.delta_msr_wait); 690 old_status = status; 691 } 692 spin_unlock(&icom_port->uart_port.lock); 693 } 694 695 static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port) 696 { 697 unsigned short int count; 698 int i; 699 700 if (port_int_reg & (INT_XMIT_COMPLETED)) { 701 trace(icom_port, "XMIT_COMPLETE", 0); 702 703 /* clear buffer in use bit */ 704 icom_port->statStg->xmit[0].flags &= 705 cpu_to_le16(~SA_FLAGS_READY_TO_XMIT); 706 707 count = (unsigned short int) 708 cpu_to_le16(icom_port->statStg->xmit[0].leLength); 709 icom_port->uart_port.icount.tx += count; 710 711 for (i=0; i<count && 712 !uart_circ_empty(&icom_port->uart_port.state->xmit); i++) { 713 714 icom_port->uart_port.state->xmit.tail++; 715 icom_port->uart_port.state->xmit.tail &= 716 (UART_XMIT_SIZE - 1); 717 } 718 719 if (!icom_write(&icom_port->uart_port)) 720 /* activate write queue */ 721 uart_write_wakeup(&icom_port->uart_port); 722 } else 723 trace(icom_port, "XMIT_DISABLED", 0); 724 } 725 726 static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port) 727 { 728 short int count, rcv_buff; 729 struct tty_port *port = &icom_port->uart_port.state->port; 730 unsigned short int status; 731 struct uart_icount *icount; 732 unsigned long offset; 733 unsigned char flag; 734 735 trace(icom_port, "RCV_COMPLETE", 0); 736 rcv_buff = icom_port->next_rcv; 737 738 status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); 739 while (status & SA_FL_RCV_DONE) { 740 int first = -1; 741 742 trace(icom_port, "FID_STATUS", status); 743 count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength); 744 745 trace(icom_port, "RCV_COUNT", count); 746 747 trace(icom_port, "REAL_COUNT", count); 748 749 offset = 750 cpu_to_le32(icom_port->statStg->rcv[rcv_buff].leBuffer) - 751 icom_port->recv_buf_pci; 752 753 /* Block copy all but the last byte as this may have status */ 754 if (count > 0) { 755 first = icom_port->recv_buf[offset]; 756 tty_insert_flip_string(port, icom_port->recv_buf + offset, count - 1); 757 } 758 759 icount = &icom_port->uart_port.icount; 760 icount->rx += count; 761 762 /* Break detect logic */ 763 if ((status & SA_FLAGS_FRAME_ERROR) 764 && first == 0) { 765 status &= ~SA_FLAGS_FRAME_ERROR; 766 status |= SA_FLAGS_BREAK_DET; 767 trace(icom_port, "BREAK_DET", 0); 768 } 769 770 flag = TTY_NORMAL; 771 772 if (status & 773 (SA_FLAGS_BREAK_DET | SA_FLAGS_PARITY_ERROR | 774 SA_FLAGS_FRAME_ERROR | SA_FLAGS_OVERRUN)) { 775 776 if (status & SA_FLAGS_BREAK_DET) 777 icount->brk++; 778 if (status & SA_FLAGS_PARITY_ERROR) 779 icount->parity++; 780 if (status & SA_FLAGS_FRAME_ERROR) 781 icount->frame++; 782 if (status & SA_FLAGS_OVERRUN) 783 icount->overrun++; 784 785 /* 786 * Now check to see if character should be 787 * ignored, and mask off conditions which 788 * should be ignored. 789 */ 790 if (status & icom_port->ignore_status_mask) { 791 trace(icom_port, "IGNORE_CHAR", 0); 792 goto ignore_char; 793 } 794 795 status &= icom_port->read_status_mask; 796 797 if (status & SA_FLAGS_BREAK_DET) { 798 flag = TTY_BREAK; 799 } else if (status & SA_FLAGS_PARITY_ERROR) { 800 trace(icom_port, "PARITY_ERROR", 0); 801 flag = TTY_PARITY; 802 } else if (status & SA_FLAGS_FRAME_ERROR) 803 flag = TTY_FRAME; 804 805 } 806 807 tty_insert_flip_char(port, *(icom_port->recv_buf + offset + count - 1), flag); 808 809 if (status & SA_FLAGS_OVERRUN) 810 /* 811 * Overrun is special, since it's 812 * reported immediately, and doesn't 813 * affect the current character 814 */ 815 tty_insert_flip_char(port, 0, TTY_OVERRUN); 816 ignore_char: 817 icom_port->statStg->rcv[rcv_buff].flags = 0; 818 icom_port->statStg->rcv[rcv_buff].leLength = 0; 819 icom_port->statStg->rcv[rcv_buff].WorkingLength = 820 (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); 821 822 rcv_buff++; 823 if (rcv_buff == NUM_RBUFFS) 824 rcv_buff = 0; 825 826 status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); 827 } 828 icom_port->next_rcv = rcv_buff; 829 830 spin_unlock(&icom_port->uart_port.lock); 831 tty_flip_buffer_push(port); 832 spin_lock(&icom_port->uart_port.lock); 833 } 834 835 static void process_interrupt(u16 port_int_reg, 836 struct icom_port *icom_port) 837 { 838 839 spin_lock(&icom_port->uart_port.lock); 840 trace(icom_port, "INTERRUPT", port_int_reg); 841 842 if (port_int_reg & (INT_XMIT_COMPLETED | INT_XMIT_DISABLED)) 843 xmit_interrupt(port_int_reg, icom_port); 844 845 if (port_int_reg & INT_RCV_COMPLETED) 846 recv_interrupt(port_int_reg, icom_port); 847 848 spin_unlock(&icom_port->uart_port.lock); 849 } 850 851 static irqreturn_t icom_interrupt(int irq, void *dev_id) 852 { 853 void __iomem * int_reg; 854 u32 adapter_interrupts; 855 u16 port_int_reg; 856 struct icom_adapter *icom_adapter; 857 struct icom_port *icom_port; 858 859 /* find icom_port for this interrupt */ 860 icom_adapter = (struct icom_adapter *) dev_id; 861 862 if (icom_adapter->version == ADAPTER_V2) { 863 int_reg = icom_adapter->base_addr + 0x8024; 864 865 adapter_interrupts = readl(int_reg); 866 867 if (adapter_interrupts & 0x00003FFF) { 868 /* port 2 interrupt, NOTE: for all ADAPTER_V2, port 2 will be active */ 869 icom_port = &icom_adapter->port_info[2]; 870 port_int_reg = (u16) adapter_interrupts; 871 process_interrupt(port_int_reg, icom_port); 872 check_modem_status(icom_port); 873 } 874 if (adapter_interrupts & 0x3FFF0000) { 875 /* port 3 interrupt */ 876 icom_port = &icom_adapter->port_info[3]; 877 if (icom_port->status == ICOM_PORT_ACTIVE) { 878 port_int_reg = 879 (u16) (adapter_interrupts >> 16); 880 process_interrupt(port_int_reg, icom_port); 881 check_modem_status(icom_port); 882 } 883 } 884 885 /* Clear out any pending interrupts */ 886 writel(adapter_interrupts, int_reg); 887 888 int_reg = icom_adapter->base_addr + 0x8004; 889 } else { 890 int_reg = icom_adapter->base_addr + 0x4004; 891 } 892 893 adapter_interrupts = readl(int_reg); 894 895 if (adapter_interrupts & 0x00003FFF) { 896 /* port 0 interrupt, NOTE: for all adapters, port 0 will be active */ 897 icom_port = &icom_adapter->port_info[0]; 898 port_int_reg = (u16) adapter_interrupts; 899 process_interrupt(port_int_reg, icom_port); 900 check_modem_status(icom_port); 901 } 902 if (adapter_interrupts & 0x3FFF0000) { 903 /* port 1 interrupt */ 904 icom_port = &icom_adapter->port_info[1]; 905 if (icom_port->status == ICOM_PORT_ACTIVE) { 906 port_int_reg = (u16) (adapter_interrupts >> 16); 907 process_interrupt(port_int_reg, icom_port); 908 check_modem_status(icom_port); 909 } 910 } 911 912 /* Clear out any pending interrupts */ 913 writel(adapter_interrupts, int_reg); 914 915 /* flush the write */ 916 adapter_interrupts = readl(int_reg); 917 918 return IRQ_HANDLED; 919 } 920 921 /* 922 * ------------------------------------------------------------------ 923 * Begin serial-core API 924 * ------------------------------------------------------------------ 925 */ 926 static unsigned int icom_tx_empty(struct uart_port *port) 927 { 928 int ret; 929 unsigned long flags; 930 931 spin_lock_irqsave(&port->lock, flags); 932 if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & 933 SA_FLAGS_READY_TO_XMIT) 934 ret = TIOCSER_TEMT; 935 else 936 ret = 0; 937 938 spin_unlock_irqrestore(&port->lock, flags); 939 return ret; 940 } 941 942 static void icom_set_mctrl(struct uart_port *port, unsigned int mctrl) 943 { 944 unsigned char local_osr; 945 946 trace(ICOM_PORT, "SET_MODEM", 0); 947 local_osr = readb(&ICOM_PORT->dram->osr); 948 949 if (mctrl & TIOCM_RTS) { 950 trace(ICOM_PORT, "RAISE_RTS", 0); 951 local_osr |= ICOM_RTS; 952 } else { 953 trace(ICOM_PORT, "LOWER_RTS", 0); 954 local_osr &= ~ICOM_RTS; 955 } 956 957 if (mctrl & TIOCM_DTR) { 958 trace(ICOM_PORT, "RAISE_DTR", 0); 959 local_osr |= ICOM_DTR; 960 } else { 961 trace(ICOM_PORT, "LOWER_DTR", 0); 962 local_osr &= ~ICOM_DTR; 963 } 964 965 writeb(local_osr, &ICOM_PORT->dram->osr); 966 } 967 968 static unsigned int icom_get_mctrl(struct uart_port *port) 969 { 970 unsigned char status; 971 unsigned int result; 972 973 trace(ICOM_PORT, "GET_MODEM", 0); 974 975 status = readb(&ICOM_PORT->dram->isr); 976 977 result = ((status & ICOM_DCD) ? TIOCM_CAR : 0) 978 | ((status & ICOM_RI) ? TIOCM_RNG : 0) 979 | ((status & ICOM_DSR) ? TIOCM_DSR : 0) 980 | ((status & ICOM_CTS) ? TIOCM_CTS : 0); 981 return result; 982 } 983 984 static void icom_stop_tx(struct uart_port *port) 985 { 986 unsigned char cmdReg; 987 988 trace(ICOM_PORT, "STOP", 0); 989 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 990 writeb(cmdReg | CMD_HOLD_XMIT, &ICOM_PORT->dram->CmdReg); 991 } 992 993 static void icom_start_tx(struct uart_port *port) 994 { 995 unsigned char cmdReg; 996 997 trace(ICOM_PORT, "START", 0); 998 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 999 if ((cmdReg & CMD_HOLD_XMIT) == CMD_HOLD_XMIT) 1000 writeb(cmdReg & ~CMD_HOLD_XMIT, 1001 &ICOM_PORT->dram->CmdReg); 1002 1003 icom_write(port); 1004 } 1005 1006 static void icom_send_xchar(struct uart_port *port, char ch) 1007 { 1008 unsigned char xdata; 1009 int index; 1010 unsigned long flags; 1011 1012 trace(ICOM_PORT, "SEND_XCHAR", ch); 1013 1014 /* wait .1 sec to send char */ 1015 for (index = 0; index < 10; index++) { 1016 spin_lock_irqsave(&port->lock, flags); 1017 xdata = readb(&ICOM_PORT->dram->xchar); 1018 if (xdata == 0x00) { 1019 trace(ICOM_PORT, "QUICK_WRITE", 0); 1020 writeb(ch, &ICOM_PORT->dram->xchar); 1021 1022 /* flush write operation */ 1023 xdata = readb(&ICOM_PORT->dram->xchar); 1024 spin_unlock_irqrestore(&port->lock, flags); 1025 break; 1026 } 1027 spin_unlock_irqrestore(&port->lock, flags); 1028 msleep(10); 1029 } 1030 } 1031 1032 static void icom_stop_rx(struct uart_port *port) 1033 { 1034 unsigned char cmdReg; 1035 1036 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 1037 writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); 1038 } 1039 1040 static void icom_break(struct uart_port *port, int break_state) 1041 { 1042 unsigned char cmdReg; 1043 unsigned long flags; 1044 1045 spin_lock_irqsave(&port->lock, flags); 1046 trace(ICOM_PORT, "BREAK", 0); 1047 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 1048 if (break_state == -1) { 1049 writeb(cmdReg | CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); 1050 } else { 1051 writeb(cmdReg & ~CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); 1052 } 1053 spin_unlock_irqrestore(&port->lock, flags); 1054 } 1055 1056 static int icom_open(struct uart_port *port) 1057 { 1058 int retval; 1059 1060 kref_get(&ICOM_PORT->adapter->kref); 1061 retval = startup(ICOM_PORT); 1062 1063 if (retval) { 1064 kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); 1065 trace(ICOM_PORT, "STARTUP_ERROR", 0); 1066 return retval; 1067 } 1068 1069 return 0; 1070 } 1071 1072 static void icom_close(struct uart_port *port) 1073 { 1074 unsigned char cmdReg; 1075 1076 trace(ICOM_PORT, "CLOSE", 0); 1077 1078 /* stop receiver */ 1079 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 1080 writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); 1081 1082 shutdown(ICOM_PORT); 1083 1084 kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); 1085 } 1086 1087 static void icom_set_termios(struct uart_port *port, 1088 struct ktermios *termios, 1089 struct ktermios *old_termios) 1090 { 1091 int baud; 1092 unsigned cflag, iflag; 1093 char new_config2; 1094 char new_config3 = 0; 1095 char tmp_byte; 1096 int index; 1097 int rcv_buff, xmit_buff; 1098 unsigned long offset; 1099 unsigned long flags; 1100 1101 spin_lock_irqsave(&port->lock, flags); 1102 trace(ICOM_PORT, "CHANGE_SPEED", 0); 1103 1104 cflag = termios->c_cflag; 1105 iflag = termios->c_iflag; 1106 1107 new_config2 = ICOM_ACFG_DRIVE1; 1108 1109 /* byte size and parity */ 1110 switch (cflag & CSIZE) { 1111 case CS5: /* 5 bits/char */ 1112 new_config2 |= ICOM_ACFG_5BPC; 1113 break; 1114 case CS6: /* 6 bits/char */ 1115 new_config2 |= ICOM_ACFG_6BPC; 1116 break; 1117 case CS7: /* 7 bits/char */ 1118 new_config2 |= ICOM_ACFG_7BPC; 1119 break; 1120 case CS8: /* 8 bits/char */ 1121 new_config2 |= ICOM_ACFG_8BPC; 1122 break; 1123 default: 1124 break; 1125 } 1126 if (cflag & CSTOPB) { 1127 /* 2 stop bits */ 1128 new_config2 |= ICOM_ACFG_2STOP_BIT; 1129 } 1130 if (cflag & PARENB) { 1131 /* parity bit enabled */ 1132 new_config2 |= ICOM_ACFG_PARITY_ENAB; 1133 trace(ICOM_PORT, "PARENB", 0); 1134 } 1135 if (cflag & PARODD) { 1136 /* odd parity */ 1137 new_config2 |= ICOM_ACFG_PARITY_ODD; 1138 trace(ICOM_PORT, "PARODD", 0); 1139 } 1140 1141 /* Determine divisor based on baud rate */ 1142 baud = uart_get_baud_rate(port, termios, old_termios, 1143 icom_acfg_baud[0], 1144 icom_acfg_baud[BAUD_TABLE_LIMIT]); 1145 if (!baud) 1146 baud = 9600; /* B0 transition handled in rs_set_termios */ 1147 1148 for (index = 0; index < BAUD_TABLE_LIMIT; index++) { 1149 if (icom_acfg_baud[index] == baud) { 1150 new_config3 = index; 1151 break; 1152 } 1153 } 1154 1155 uart_update_timeout(port, cflag, baud); 1156 1157 /* CTS flow control flag and modem status interrupts */ 1158 tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); 1159 if (cflag & CRTSCTS) 1160 tmp_byte |= HDLC_HDW_FLOW; 1161 else 1162 tmp_byte &= ~HDLC_HDW_FLOW; 1163 writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); 1164 1165 /* 1166 * Set up parity check flag 1167 */ 1168 ICOM_PORT->read_status_mask = SA_FLAGS_OVERRUN | SA_FL_RCV_DONE; 1169 if (iflag & INPCK) 1170 ICOM_PORT->read_status_mask |= 1171 SA_FLAGS_FRAME_ERROR | SA_FLAGS_PARITY_ERROR; 1172 1173 if ((iflag & BRKINT) || (iflag & PARMRK)) 1174 ICOM_PORT->read_status_mask |= SA_FLAGS_BREAK_DET; 1175 1176 /* 1177 * Characters to ignore 1178 */ 1179 ICOM_PORT->ignore_status_mask = 0; 1180 if (iflag & IGNPAR) 1181 ICOM_PORT->ignore_status_mask |= 1182 SA_FLAGS_PARITY_ERROR | SA_FLAGS_FRAME_ERROR; 1183 if (iflag & IGNBRK) { 1184 ICOM_PORT->ignore_status_mask |= SA_FLAGS_BREAK_DET; 1185 /* 1186 * If we're ignore parity and break indicators, ignore 1187 * overruns too. (For real raw support). 1188 */ 1189 if (iflag & IGNPAR) 1190 ICOM_PORT->ignore_status_mask |= SA_FLAGS_OVERRUN; 1191 } 1192 1193 /* 1194 * !!! ignore all characters if CREAD is not set 1195 */ 1196 if ((cflag & CREAD) == 0) 1197 ICOM_PORT->ignore_status_mask |= SA_FL_RCV_DONE; 1198 1199 /* Turn off Receiver to prepare for reset */ 1200 writeb(CMD_RCV_DISABLE, &ICOM_PORT->dram->CmdReg); 1201 1202 for (index = 0; index < 10; index++) { 1203 if (readb(&ICOM_PORT->dram->PrevCmdReg) == 0x00) { 1204 break; 1205 } 1206 } 1207 1208 /* clear all current buffers of data */ 1209 for (rcv_buff = 0; rcv_buff < NUM_RBUFFS; rcv_buff++) { 1210 ICOM_PORT->statStg->rcv[rcv_buff].flags = 0; 1211 ICOM_PORT->statStg->rcv[rcv_buff].leLength = 0; 1212 ICOM_PORT->statStg->rcv[rcv_buff].WorkingLength = 1213 (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); 1214 } 1215 1216 for (xmit_buff = 0; xmit_buff < NUM_XBUFFS; xmit_buff++) { 1217 ICOM_PORT->statStg->xmit[xmit_buff].flags = 0; 1218 } 1219 1220 /* activate changes and start xmit and receiver here */ 1221 /* Enable the receiver */ 1222 writeb(new_config3, &(ICOM_PORT->dram->async_config3)); 1223 writeb(new_config2, &(ICOM_PORT->dram->async_config2)); 1224 tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); 1225 tmp_byte |= HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL; 1226 writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); 1227 writeb(0x04, &(ICOM_PORT->dram->FlagFillIdleTimer)); /* 0.5 seconds */ 1228 writeb(0xFF, &(ICOM_PORT->dram->ier)); /* enable modem signal interrupts */ 1229 1230 /* reset processor */ 1231 writeb(CMD_RESTART, &ICOM_PORT->dram->CmdReg); 1232 1233 for (index = 0; index < 10; index++) { 1234 if (readb(&ICOM_PORT->dram->CmdReg) == 0x00) { 1235 break; 1236 } 1237 } 1238 1239 /* Enable Transmitter and Receiver */ 1240 offset = 1241 (unsigned long) &ICOM_PORT->statStg->rcv[0] - 1242 (unsigned long) ICOM_PORT->statStg; 1243 writel(ICOM_PORT->statStg_pci + offset, 1244 &ICOM_PORT->dram->RcvStatusAddr); 1245 ICOM_PORT->next_rcv = 0; 1246 ICOM_PORT->put_length = 0; 1247 *ICOM_PORT->xmitRestart = 0; 1248 writel(ICOM_PORT->xmitRestart_pci, 1249 &ICOM_PORT->dram->XmitStatusAddr); 1250 trace(ICOM_PORT, "XR_ENAB", 0); 1251 writeb(CMD_XMIT_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); 1252 1253 spin_unlock_irqrestore(&port->lock, flags); 1254 } 1255 1256 static const char *icom_type(struct uart_port *port) 1257 { 1258 return "icom"; 1259 } 1260 1261 static void icom_release_port(struct uart_port *port) 1262 { 1263 } 1264 1265 static int icom_request_port(struct uart_port *port) 1266 { 1267 return 0; 1268 } 1269 1270 static void icom_config_port(struct uart_port *port, int flags) 1271 { 1272 port->type = PORT_ICOM; 1273 } 1274 1275 static const struct uart_ops icom_ops = { 1276 .tx_empty = icom_tx_empty, 1277 .set_mctrl = icom_set_mctrl, 1278 .get_mctrl = icom_get_mctrl, 1279 .stop_tx = icom_stop_tx, 1280 .start_tx = icom_start_tx, 1281 .send_xchar = icom_send_xchar, 1282 .stop_rx = icom_stop_rx, 1283 .break_ctl = icom_break, 1284 .startup = icom_open, 1285 .shutdown = icom_close, 1286 .set_termios = icom_set_termios, 1287 .type = icom_type, 1288 .release_port = icom_release_port, 1289 .request_port = icom_request_port, 1290 .config_port = icom_config_port, 1291 }; 1292 1293 #define ICOM_CONSOLE NULL 1294 1295 static struct uart_driver icom_uart_driver = { 1296 .owner = THIS_MODULE, 1297 .driver_name = ICOM_DRIVER_NAME, 1298 .dev_name = "ttyA", 1299 .major = ICOM_MAJOR, 1300 .minor = ICOM_MINOR_START, 1301 .nr = NR_PORTS, 1302 .cons = ICOM_CONSOLE, 1303 }; 1304 1305 static int icom_init_ports(struct icom_adapter *icom_adapter) 1306 { 1307 u32 subsystem_id = icom_adapter->subsystem_id; 1308 int i; 1309 struct icom_port *icom_port; 1310 1311 if (icom_adapter->version == ADAPTER_V1) { 1312 icom_adapter->numb_ports = 2; 1313 1314 for (i = 0; i < 2; i++) { 1315 icom_port = &icom_adapter->port_info[i]; 1316 icom_port->port = i; 1317 icom_port->status = ICOM_PORT_ACTIVE; 1318 icom_port->imbed_modem = ICOM_UNKNOWN; 1319 } 1320 } else { 1321 if (subsystem_id == PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL) { 1322 icom_adapter->numb_ports = 4; 1323 1324 for (i = 0; i < 4; i++) { 1325 icom_port = &icom_adapter->port_info[i]; 1326 1327 icom_port->port = i; 1328 icom_port->status = ICOM_PORT_ACTIVE; 1329 icom_port->imbed_modem = ICOM_IMBED_MODEM; 1330 } 1331 } else { 1332 icom_adapter->numb_ports = 4; 1333 1334 icom_adapter->port_info[0].port = 0; 1335 icom_adapter->port_info[0].status = ICOM_PORT_ACTIVE; 1336 1337 if (subsystem_id == 1338 PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM) { 1339 icom_adapter->port_info[0].imbed_modem = ICOM_IMBED_MODEM; 1340 } else { 1341 icom_adapter->port_info[0].imbed_modem = ICOM_RVX; 1342 } 1343 1344 icom_adapter->port_info[1].status = ICOM_PORT_OFF; 1345 1346 icom_adapter->port_info[2].port = 2; 1347 icom_adapter->port_info[2].status = ICOM_PORT_ACTIVE; 1348 icom_adapter->port_info[2].imbed_modem = ICOM_RVX; 1349 icom_adapter->port_info[3].status = ICOM_PORT_OFF; 1350 } 1351 } 1352 1353 return 0; 1354 } 1355 1356 static void icom_port_active(struct icom_port *icom_port, struct icom_adapter *icom_adapter, int port_num) 1357 { 1358 if (icom_adapter->version == ADAPTER_V1) { 1359 icom_port->global_reg = icom_adapter->base_addr + 0x4000; 1360 icom_port->int_reg = icom_adapter->base_addr + 1361 0x4004 + 2 - 2 * port_num; 1362 } else { 1363 icom_port->global_reg = icom_adapter->base_addr + 0x8000; 1364 if (icom_port->port < 2) 1365 icom_port->int_reg = icom_adapter->base_addr + 1366 0x8004 + 2 - 2 * icom_port->port; 1367 else 1368 icom_port->int_reg = icom_adapter->base_addr + 1369 0x8024 + 2 - 2 * (icom_port->port - 2); 1370 } 1371 } 1372 static int icom_load_ports(struct icom_adapter *icom_adapter) 1373 { 1374 struct icom_port *icom_port; 1375 int port_num; 1376 1377 for (port_num = 0; port_num < icom_adapter->numb_ports; port_num++) { 1378 1379 icom_port = &icom_adapter->port_info[port_num]; 1380 1381 if (icom_port->status == ICOM_PORT_ACTIVE) { 1382 icom_port_active(icom_port, icom_adapter, port_num); 1383 icom_port->dram = icom_adapter->base_addr + 1384 0x2000 * icom_port->port; 1385 1386 icom_port->adapter = icom_adapter; 1387 1388 /* get port memory */ 1389 if (get_port_memory(icom_port) != 0) { 1390 dev_err(&icom_port->adapter->pci_dev->dev, 1391 "Memory allocation for port FAILED\n"); 1392 } 1393 } 1394 } 1395 return 0; 1396 } 1397 1398 static int icom_alloc_adapter(struct icom_adapter 1399 **icom_adapter_ref) 1400 { 1401 int adapter_count = 0; 1402 struct icom_adapter *icom_adapter; 1403 struct icom_adapter *cur_adapter_entry; 1404 struct list_head *tmp; 1405 1406 icom_adapter = kzalloc(sizeof(struct icom_adapter), GFP_KERNEL); 1407 1408 if (!icom_adapter) { 1409 return -ENOMEM; 1410 } 1411 1412 list_for_each(tmp, &icom_adapter_head) { 1413 cur_adapter_entry = 1414 list_entry(tmp, struct icom_adapter, 1415 icom_adapter_entry); 1416 if (cur_adapter_entry->index != adapter_count) { 1417 break; 1418 } 1419 adapter_count++; 1420 } 1421 1422 icom_adapter->index = adapter_count; 1423 list_add_tail(&icom_adapter->icom_adapter_entry, tmp); 1424 1425 *icom_adapter_ref = icom_adapter; 1426 return 0; 1427 } 1428 1429 static void icom_free_adapter(struct icom_adapter *icom_adapter) 1430 { 1431 list_del(&icom_adapter->icom_adapter_entry); 1432 kfree(icom_adapter); 1433 } 1434 1435 static void icom_remove_adapter(struct icom_adapter *icom_adapter) 1436 { 1437 struct icom_port *icom_port; 1438 int index; 1439 1440 for (index = 0; index < icom_adapter->numb_ports; index++) { 1441 icom_port = &icom_adapter->port_info[index]; 1442 1443 if (icom_port->status == ICOM_PORT_ACTIVE) { 1444 dev_info(&icom_adapter->pci_dev->dev, 1445 "Device removed\n"); 1446 1447 uart_remove_one_port(&icom_uart_driver, 1448 &icom_port->uart_port); 1449 1450 /* be sure that DTR and RTS are dropped */ 1451 writeb(0x00, &icom_port->dram->osr); 1452 1453 /* Wait 0.1 Sec for simple Init to complete */ 1454 msleep(100); 1455 1456 /* Stop proccessor */ 1457 stop_processor(icom_port); 1458 1459 free_port_memory(icom_port); 1460 } 1461 } 1462 1463 free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter); 1464 iounmap(icom_adapter->base_addr); 1465 pci_release_regions(icom_adapter->pci_dev); 1466 icom_free_adapter(icom_adapter); 1467 } 1468 1469 static void icom_kref_release(struct kref *kref) 1470 { 1471 struct icom_adapter *icom_adapter; 1472 1473 icom_adapter = to_icom_adapter(kref); 1474 icom_remove_adapter(icom_adapter); 1475 } 1476 1477 static int icom_probe(struct pci_dev *dev, 1478 const struct pci_device_id *ent) 1479 { 1480 int index; 1481 unsigned int command_reg; 1482 int retval; 1483 struct icom_adapter *icom_adapter; 1484 struct icom_port *icom_port; 1485 1486 retval = pci_enable_device(dev); 1487 if (retval) { 1488 dev_err(&dev->dev, "Device enable FAILED\n"); 1489 return retval; 1490 } 1491 1492 retval = pci_request_regions(dev, "icom"); 1493 if (retval) { 1494 dev_err(&dev->dev, "pci_request_regions FAILED\n"); 1495 pci_disable_device(dev); 1496 return retval; 1497 } 1498 1499 pci_set_master(dev); 1500 1501 retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg); 1502 if (retval) { 1503 dev_err(&dev->dev, "PCI Config read FAILED\n"); 1504 return retval; 1505 } 1506 1507 pci_write_config_dword(dev, PCI_COMMAND, 1508 command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER 1509 | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); 1510 1511 if (ent->driver_data == ADAPTER_V1) { 1512 pci_write_config_dword(dev, 0x44, 0x8300830A); 1513 } else { 1514 pci_write_config_dword(dev, 0x44, 0x42004200); 1515 pci_write_config_dword(dev, 0x48, 0x42004200); 1516 } 1517 1518 1519 retval = icom_alloc_adapter(&icom_adapter); 1520 if (retval) { 1521 dev_err(&dev->dev, "icom_alloc_adapter FAILED\n"); 1522 retval = -EIO; 1523 goto probe_exit0; 1524 } 1525 1526 icom_adapter->base_addr_pci = pci_resource_start(dev, 0); 1527 icom_adapter->pci_dev = dev; 1528 icom_adapter->version = ent->driver_data; 1529 icom_adapter->subsystem_id = ent->subdevice; 1530 1531 1532 retval = icom_init_ports(icom_adapter); 1533 if (retval) { 1534 dev_err(&dev->dev, "Port configuration failed\n"); 1535 goto probe_exit1; 1536 } 1537 1538 icom_adapter->base_addr = pci_ioremap_bar(dev, 0); 1539 1540 if (!icom_adapter->base_addr) { 1541 retval = -ENOMEM; 1542 goto probe_exit1; 1543 } 1544 1545 /* save off irq and request irq line */ 1546 retval = request_irq(dev->irq, icom_interrupt, IRQF_SHARED, ICOM_DRIVER_NAME, (void *)icom_adapter); 1547 if (retval) { 1548 goto probe_exit2; 1549 } 1550 1551 retval = icom_load_ports(icom_adapter); 1552 1553 for (index = 0; index < icom_adapter->numb_ports; index++) { 1554 icom_port = &icom_adapter->port_info[index]; 1555 1556 if (icom_port->status == ICOM_PORT_ACTIVE) { 1557 icom_port->uart_port.irq = icom_port->adapter->pci_dev->irq; 1558 icom_port->uart_port.type = PORT_ICOM; 1559 icom_port->uart_port.iotype = UPIO_MEM; 1560 icom_port->uart_port.membase = 1561 (unsigned char __iomem *)icom_adapter->base_addr_pci; 1562 icom_port->uart_port.fifosize = 16; 1563 icom_port->uart_port.ops = &icom_ops; 1564 icom_port->uart_port.line = 1565 icom_port->port + icom_adapter->index * 4; 1566 if (uart_add_one_port (&icom_uart_driver, &icom_port->uart_port)) { 1567 icom_port->status = ICOM_PORT_OFF; 1568 dev_err(&dev->dev, "Device add failed\n"); 1569 } else 1570 dev_info(&dev->dev, "Device added\n"); 1571 } 1572 } 1573 1574 kref_init(&icom_adapter->kref); 1575 return 0; 1576 1577 probe_exit2: 1578 iounmap(icom_adapter->base_addr); 1579 probe_exit1: 1580 icom_free_adapter(icom_adapter); 1581 1582 probe_exit0: 1583 pci_release_regions(dev); 1584 pci_disable_device(dev); 1585 1586 return retval; 1587 } 1588 1589 static void icom_remove(struct pci_dev *dev) 1590 { 1591 struct icom_adapter *icom_adapter; 1592 struct list_head *tmp; 1593 1594 list_for_each(tmp, &icom_adapter_head) { 1595 icom_adapter = list_entry(tmp, struct icom_adapter, 1596 icom_adapter_entry); 1597 if (icom_adapter->pci_dev == dev) { 1598 kref_put(&icom_adapter->kref, icom_kref_release); 1599 return; 1600 } 1601 } 1602 1603 dev_err(&dev->dev, "Unable to find device to remove\n"); 1604 } 1605 1606 static struct pci_driver icom_pci_driver = { 1607 .name = ICOM_DRIVER_NAME, 1608 .id_table = icom_pci_table, 1609 .probe = icom_probe, 1610 .remove = icom_remove, 1611 }; 1612 1613 static int __init icom_init(void) 1614 { 1615 int ret; 1616 1617 spin_lock_init(&icom_lock); 1618 1619 ret = uart_register_driver(&icom_uart_driver); 1620 if (ret) 1621 return ret; 1622 1623 ret = pci_register_driver(&icom_pci_driver); 1624 1625 if (ret < 0) 1626 uart_unregister_driver(&icom_uart_driver); 1627 1628 return ret; 1629 } 1630 1631 static void __exit icom_exit(void) 1632 { 1633 pci_unregister_driver(&icom_pci_driver); 1634 uart_unregister_driver(&icom_uart_driver); 1635 } 1636 1637 module_init(icom_init); 1638 module_exit(icom_exit); 1639 1640 MODULE_AUTHOR("Michael Anderson <mjanders@us.ibm.com>"); 1641 MODULE_DESCRIPTION("IBM iSeries Serial IOA driver"); 1642 MODULE_SUPPORTED_DEVICE 1643 ("IBM iSeries 2745, 2771, 2772, 2742, 2793 and 2805 Communications adapters"); 1644 MODULE_LICENSE("GPL"); 1645 MODULE_FIRMWARE("icom_call_setup.bin"); 1646 MODULE_FIRMWARE("icom_res_dce.bin"); 1647 MODULE_FIRMWARE("icom_asc.bin"); 1648