1 /* 2 * icom.c 3 * 4 * Copyright (C) 2001 IBM Corporation. All rights reserved. 5 * 6 * Serial device driver. 7 * 8 * Based on code from serial.c 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 23 * 24 */ 25 #define SERIAL_DO_RESTART 26 #include <linux/module.h> 27 #include <linux/kernel.h> 28 #include <linux/errno.h> 29 #include <linux/signal.h> 30 #include <linux/timer.h> 31 #include <linux/interrupt.h> 32 #include <linux/tty.h> 33 #include <linux/termios.h> 34 #include <linux/fs.h> 35 #include <linux/tty_flip.h> 36 #include <linux/serial.h> 37 #include <linux/serial_reg.h> 38 #include <linux/major.h> 39 #include <linux/string.h> 40 #include <linux/fcntl.h> 41 #include <linux/ptrace.h> 42 #include <linux/ioport.h> 43 #include <linux/mm.h> 44 #include <linux/slab.h> 45 #include <linux/init.h> 46 #include <linux/delay.h> 47 #include <linux/pci.h> 48 #include <linux/vmalloc.h> 49 #include <linux/smp.h> 50 #include <linux/spinlock.h> 51 #include <linux/kref.h> 52 #include <linux/firmware.h> 53 #include <linux/bitops.h> 54 55 #include <asm/io.h> 56 #include <asm/irq.h> 57 #include <asm/uaccess.h> 58 59 #include "icom.h" 60 61 /*#define ICOM_TRACE enable port trace capabilities */ 62 63 #define ICOM_DRIVER_NAME "icom" 64 #define ICOM_VERSION_STR "1.3.1" 65 #define NR_PORTS 128 66 #define ICOM_PORT ((struct icom_port *)port) 67 #define to_icom_adapter(d) container_of(d, struct icom_adapter, kref) 68 69 static const struct pci_device_id icom_pci_table[] = { 70 { 71 .vendor = PCI_VENDOR_ID_IBM, 72 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1, 73 .subvendor = PCI_ANY_ID, 74 .subdevice = PCI_ANY_ID, 75 .driver_data = ADAPTER_V1, 76 }, 77 { 78 .vendor = PCI_VENDOR_ID_IBM, 79 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 80 .subvendor = PCI_VENDOR_ID_IBM, 81 .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX, 82 .driver_data = ADAPTER_V2, 83 }, 84 { 85 .vendor = PCI_VENDOR_ID_IBM, 86 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 87 .subvendor = PCI_VENDOR_ID_IBM, 88 .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM, 89 .driver_data = ADAPTER_V2, 90 }, 91 { 92 .vendor = PCI_VENDOR_ID_IBM, 93 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 94 .subvendor = PCI_VENDOR_ID_IBM, 95 .subdevice = PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL, 96 .driver_data = ADAPTER_V2, 97 }, 98 { 99 .vendor = PCI_VENDOR_ID_IBM, 100 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, 101 .subvendor = PCI_VENDOR_ID_IBM, 102 .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE, 103 .driver_data = ADAPTER_V2, 104 }, 105 {} 106 }; 107 108 static struct lookup_proc_table start_proc[4] = { 109 {NULL, ICOM_CONTROL_START_A}, 110 {NULL, ICOM_CONTROL_START_B}, 111 {NULL, ICOM_CONTROL_START_C}, 112 {NULL, ICOM_CONTROL_START_D} 113 }; 114 115 116 static struct lookup_proc_table stop_proc[4] = { 117 {NULL, ICOM_CONTROL_STOP_A}, 118 {NULL, ICOM_CONTROL_STOP_B}, 119 {NULL, ICOM_CONTROL_STOP_C}, 120 {NULL, ICOM_CONTROL_STOP_D} 121 }; 122 123 static struct lookup_int_table int_mask_tbl[4] = { 124 {NULL, ICOM_INT_MASK_PRC_A}, 125 {NULL, ICOM_INT_MASK_PRC_B}, 126 {NULL, ICOM_INT_MASK_PRC_C}, 127 {NULL, ICOM_INT_MASK_PRC_D}, 128 }; 129 130 131 MODULE_DEVICE_TABLE(pci, icom_pci_table); 132 133 static LIST_HEAD(icom_adapter_head); 134 135 /* spinlock for adapter initialization and changing adapter operations */ 136 static spinlock_t icom_lock; 137 138 #ifdef ICOM_TRACE 139 static inline void trace(struct icom_port *icom_port, char *trace_pt, 140 unsigned long trace_data) 141 { 142 dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n", 143 icom_port->port, trace_pt, trace_data); 144 } 145 #else 146 static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {}; 147 #endif 148 static void icom_kref_release(struct kref *kref); 149 150 static void free_port_memory(struct icom_port *icom_port) 151 { 152 struct pci_dev *dev = icom_port->adapter->pci_dev; 153 154 trace(icom_port, "RET_PORT_MEM", 0); 155 if (icom_port->recv_buf) { 156 pci_free_consistent(dev, 4096, icom_port->recv_buf, 157 icom_port->recv_buf_pci); 158 icom_port->recv_buf = NULL; 159 } 160 if (icom_port->xmit_buf) { 161 pci_free_consistent(dev, 4096, icom_port->xmit_buf, 162 icom_port->xmit_buf_pci); 163 icom_port->xmit_buf = NULL; 164 } 165 if (icom_port->statStg) { 166 pci_free_consistent(dev, 4096, icom_port->statStg, 167 icom_port->statStg_pci); 168 icom_port->statStg = NULL; 169 } 170 171 if (icom_port->xmitRestart) { 172 pci_free_consistent(dev, 4096, icom_port->xmitRestart, 173 icom_port->xmitRestart_pci); 174 icom_port->xmitRestart = NULL; 175 } 176 } 177 178 static int get_port_memory(struct icom_port *icom_port) 179 { 180 int index; 181 unsigned long stgAddr; 182 unsigned long startStgAddr; 183 unsigned long offset; 184 struct pci_dev *dev = icom_port->adapter->pci_dev; 185 186 icom_port->xmit_buf = 187 pci_alloc_consistent(dev, 4096, &icom_port->xmit_buf_pci); 188 if (!icom_port->xmit_buf) { 189 dev_err(&dev->dev, "Can not allocate Transmit buffer\n"); 190 return -ENOMEM; 191 } 192 193 trace(icom_port, "GET_PORT_MEM", 194 (unsigned long) icom_port->xmit_buf); 195 196 icom_port->recv_buf = 197 pci_alloc_consistent(dev, 4096, &icom_port->recv_buf_pci); 198 if (!icom_port->recv_buf) { 199 dev_err(&dev->dev, "Can not allocate Receive buffer\n"); 200 free_port_memory(icom_port); 201 return -ENOMEM; 202 } 203 trace(icom_port, "GET_PORT_MEM", 204 (unsigned long) icom_port->recv_buf); 205 206 icom_port->statStg = 207 pci_alloc_consistent(dev, 4096, &icom_port->statStg_pci); 208 if (!icom_port->statStg) { 209 dev_err(&dev->dev, "Can not allocate Status buffer\n"); 210 free_port_memory(icom_port); 211 return -ENOMEM; 212 } 213 trace(icom_port, "GET_PORT_MEM", 214 (unsigned long) icom_port->statStg); 215 216 icom_port->xmitRestart = 217 pci_alloc_consistent(dev, 4096, &icom_port->xmitRestart_pci); 218 if (!icom_port->xmitRestart) { 219 dev_err(&dev->dev, 220 "Can not allocate xmit Restart buffer\n"); 221 free_port_memory(icom_port); 222 return -ENOMEM; 223 } 224 225 memset(icom_port->statStg, 0, 4096); 226 227 /* FODs: Frame Out Descriptor Queue, this is a FIFO queue that 228 indicates that frames are to be transmitted 229 */ 230 231 stgAddr = (unsigned long) icom_port->statStg; 232 for (index = 0; index < NUM_XBUFFS; index++) { 233 trace(icom_port, "FOD_ADDR", stgAddr); 234 stgAddr = stgAddr + sizeof(icom_port->statStg->xmit[0]); 235 if (index < (NUM_XBUFFS - 1)) { 236 memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); 237 icom_port->statStg->xmit[index].leLengthASD = 238 (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); 239 trace(icom_port, "FOD_ADDR", stgAddr); 240 trace(icom_port, "FOD_XBUFF", 241 (unsigned long) icom_port->xmit_buf); 242 icom_port->statStg->xmit[index].leBuffer = 243 cpu_to_le32(icom_port->xmit_buf_pci); 244 } else if (index == (NUM_XBUFFS - 1)) { 245 memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); 246 icom_port->statStg->xmit[index].leLengthASD = 247 (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); 248 trace(icom_port, "FOD_XBUFF", 249 (unsigned long) icom_port->xmit_buf); 250 icom_port->statStg->xmit[index].leBuffer = 251 cpu_to_le32(icom_port->xmit_buf_pci); 252 } else { 253 memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); 254 } 255 } 256 /* FIDs */ 257 startStgAddr = stgAddr; 258 259 /* fill in every entry, even if no buffer */ 260 for (index = 0; index < NUM_RBUFFS; index++) { 261 trace(icom_port, "FID_ADDR", stgAddr); 262 stgAddr = stgAddr + sizeof(icom_port->statStg->rcv[0]); 263 icom_port->statStg->rcv[index].leLength = 0; 264 icom_port->statStg->rcv[index].WorkingLength = 265 (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); 266 if (index < (NUM_RBUFFS - 1) ) { 267 offset = stgAddr - (unsigned long) icom_port->statStg; 268 icom_port->statStg->rcv[index].leNext = 269 cpu_to_le32(icom_port-> statStg_pci + offset); 270 trace(icom_port, "FID_RBUFF", 271 (unsigned long) icom_port->recv_buf); 272 icom_port->statStg->rcv[index].leBuffer = 273 cpu_to_le32(icom_port->recv_buf_pci); 274 } else if (index == (NUM_RBUFFS -1) ) { 275 offset = startStgAddr - (unsigned long) icom_port->statStg; 276 icom_port->statStg->rcv[index].leNext = 277 cpu_to_le32(icom_port-> statStg_pci + offset); 278 trace(icom_port, "FID_RBUFF", 279 (unsigned long) icom_port->recv_buf + 2048); 280 icom_port->statStg->rcv[index].leBuffer = 281 cpu_to_le32(icom_port->recv_buf_pci + 2048); 282 } else { 283 icom_port->statStg->rcv[index].leNext = 0; 284 icom_port->statStg->rcv[index].leBuffer = 0; 285 } 286 } 287 288 return 0; 289 } 290 291 static void stop_processor(struct icom_port *icom_port) 292 { 293 unsigned long temp; 294 unsigned long flags; 295 int port; 296 297 spin_lock_irqsave(&icom_lock, flags); 298 299 port = icom_port->port; 300 if (port >= ARRAY_SIZE(stop_proc)) { 301 dev_err(&icom_port->adapter->pci_dev->dev, 302 "Invalid port assignment\n"); 303 goto unlock; 304 } 305 306 if (port == 0 || port == 1) 307 stop_proc[port].global_control_reg = &icom_port->global_reg->control; 308 else 309 stop_proc[port].global_control_reg = &icom_port->global_reg->control_2; 310 311 temp = readl(stop_proc[port].global_control_reg); 312 temp = (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id; 313 writel(temp, stop_proc[port].global_control_reg); 314 315 /* write flush */ 316 readl(stop_proc[port].global_control_reg); 317 318 unlock: 319 spin_unlock_irqrestore(&icom_lock, flags); 320 } 321 322 static void start_processor(struct icom_port *icom_port) 323 { 324 unsigned long temp; 325 unsigned long flags; 326 int port; 327 328 spin_lock_irqsave(&icom_lock, flags); 329 330 port = icom_port->port; 331 if (port >= ARRAY_SIZE(start_proc)) { 332 dev_err(&icom_port->adapter->pci_dev->dev, 333 "Invalid port assignment\n"); 334 goto unlock; 335 } 336 337 if (port == 0 || port == 1) 338 start_proc[port].global_control_reg = &icom_port->global_reg->control; 339 else 340 start_proc[port].global_control_reg = &icom_port->global_reg->control_2; 341 342 temp = readl(start_proc[port].global_control_reg); 343 temp = (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id; 344 writel(temp, start_proc[port].global_control_reg); 345 346 /* write flush */ 347 readl(start_proc[port].global_control_reg); 348 349 unlock: 350 spin_unlock_irqrestore(&icom_lock, flags); 351 } 352 353 static void load_code(struct icom_port *icom_port) 354 { 355 const struct firmware *fw; 356 char __iomem *iram_ptr; 357 int index; 358 int status = 0; 359 void __iomem *dram_ptr = icom_port->dram; 360 dma_addr_t temp_pci; 361 unsigned char *new_page = NULL; 362 unsigned char cable_id = NO_CABLE; 363 struct pci_dev *dev = icom_port->adapter->pci_dev; 364 365 /* Clear out any pending interrupts */ 366 writew(0x3FFF, icom_port->int_reg); 367 368 trace(icom_port, "CLEAR_INTERRUPTS", 0); 369 370 /* Stop processor */ 371 stop_processor(icom_port); 372 373 /* Zero out DRAM */ 374 memset_io(dram_ptr, 0, 512); 375 376 /* Load Call Setup into Adapter */ 377 if (request_firmware(&fw, "icom_call_setup.bin", &dev->dev) < 0) { 378 dev_err(&dev->dev,"Unable to load icom_call_setup.bin firmware image\n"); 379 status = -1; 380 goto load_code_exit; 381 } 382 383 if (fw->size > ICOM_DCE_IRAM_OFFSET) { 384 dev_err(&dev->dev, "Invalid firmware image for icom_call_setup.bin found.\n"); 385 release_firmware(fw); 386 status = -1; 387 goto load_code_exit; 388 } 389 390 iram_ptr = (char __iomem *)icom_port->dram + ICOM_IRAM_OFFSET; 391 for (index = 0; index < fw->size; index++) 392 writeb(fw->data[index], &iram_ptr[index]); 393 394 release_firmware(fw); 395 396 /* Load Resident DCE portion of Adapter */ 397 if (request_firmware(&fw, "icom_res_dce.bin", &dev->dev) < 0) { 398 dev_err(&dev->dev,"Unable to load icom_res_dce.bin firmware image\n"); 399 status = -1; 400 goto load_code_exit; 401 } 402 403 if (fw->size > ICOM_IRAM_SIZE) { 404 dev_err(&dev->dev, "Invalid firmware image for icom_res_dce.bin found.\n"); 405 release_firmware(fw); 406 status = -1; 407 goto load_code_exit; 408 } 409 410 iram_ptr = (char __iomem *) icom_port->dram + ICOM_IRAM_OFFSET; 411 for (index = ICOM_DCE_IRAM_OFFSET; index < fw->size; index++) 412 writeb(fw->data[index], &iram_ptr[index]); 413 414 release_firmware(fw); 415 416 /* Set Hardware level */ 417 if (icom_port->adapter->version == ADAPTER_V2) 418 writeb(V2_HARDWARE, &(icom_port->dram->misc_flags)); 419 420 /* Start the processor in Adapter */ 421 start_processor(icom_port); 422 423 writeb((HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL), 424 &(icom_port->dram->HDLCConfigReg)); 425 writeb(0x04, &(icom_port->dram->FlagFillIdleTimer)); /* 0.5 seconds */ 426 writeb(0x00, &(icom_port->dram->CmdReg)); 427 writeb(0x10, &(icom_port->dram->async_config3)); 428 writeb((ICOM_ACFG_DRIVE1 | ICOM_ACFG_NO_PARITY | ICOM_ACFG_8BPC | 429 ICOM_ACFG_1STOP_BIT), &(icom_port->dram->async_config2)); 430 431 /*Set up data in icom DRAM to indicate where personality 432 *code is located and its length. 433 */ 434 new_page = pci_alloc_consistent(dev, 4096, &temp_pci); 435 436 if (!new_page) { 437 dev_err(&dev->dev, "Can not allocate DMA buffer\n"); 438 status = -1; 439 goto load_code_exit; 440 } 441 442 if (request_firmware(&fw, "icom_asc.bin", &dev->dev) < 0) { 443 dev_err(&dev->dev,"Unable to load icom_asc.bin firmware image\n"); 444 status = -1; 445 goto load_code_exit; 446 } 447 448 if (fw->size > ICOM_DCE_IRAM_OFFSET) { 449 dev_err(&dev->dev, "Invalid firmware image for icom_asc.bin found.\n"); 450 release_firmware(fw); 451 status = -1; 452 goto load_code_exit; 453 } 454 455 for (index = 0; index < fw->size; index++) 456 new_page[index] = fw->data[index]; 457 458 writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length); 459 writel(temp_pci, &icom_port->dram->mac_load_addr); 460 461 release_firmware(fw); 462 463 /*Setting the syncReg to 0x80 causes adapter to start downloading 464 the personality code into adapter instruction RAM. 465 Once code is loaded, it will begin executing and, based on 466 information provided above, will start DMAing data from 467 shared memory to adapter DRAM. 468 */ 469 /* the wait loop below verifies this write operation has been done 470 and processed 471 */ 472 writeb(START_DOWNLOAD, &icom_port->dram->sync); 473 474 /* Wait max 1 Sec for data download and processor to start */ 475 for (index = 0; index < 10; index++) { 476 msleep(100); 477 if (readb(&icom_port->dram->misc_flags) & ICOM_HDW_ACTIVE) 478 break; 479 } 480 481 if (index == 10) 482 status = -1; 483 484 /* 485 * check Cable ID 486 */ 487 cable_id = readb(&icom_port->dram->cable_id); 488 489 if (cable_id & ICOM_CABLE_ID_VALID) { 490 /* Get cable ID into the lower 4 bits (standard form) */ 491 cable_id = (cable_id & ICOM_CABLE_ID_MASK) >> 4; 492 icom_port->cable_id = cable_id; 493 } else { 494 dev_err(&dev->dev,"Invalid or no cable attached\n"); 495 icom_port->cable_id = NO_CABLE; 496 } 497 498 load_code_exit: 499 500 if (status != 0) { 501 /* Clear out any pending interrupts */ 502 writew(0x3FFF, icom_port->int_reg); 503 504 /* Turn off port */ 505 writeb(ICOM_DISABLE, &(icom_port->dram->disable)); 506 507 /* Stop processor */ 508 stop_processor(icom_port); 509 510 dev_err(&icom_port->adapter->pci_dev->dev,"Port not operational\n"); 511 } 512 513 if (new_page != NULL) 514 pci_free_consistent(dev, 4096, new_page, temp_pci); 515 } 516 517 static int startup(struct icom_port *icom_port) 518 { 519 unsigned long temp; 520 unsigned char cable_id, raw_cable_id; 521 unsigned long flags; 522 int port; 523 524 trace(icom_port, "STARTUP", 0); 525 526 if (!icom_port->dram) { 527 /* should NEVER be NULL */ 528 dev_err(&icom_port->adapter->pci_dev->dev, 529 "Unusable Port, port configuration missing\n"); 530 return -ENODEV; 531 } 532 533 /* 534 * check Cable ID 535 */ 536 raw_cable_id = readb(&icom_port->dram->cable_id); 537 trace(icom_port, "CABLE_ID", raw_cable_id); 538 539 /* Get cable ID into the lower 4 bits (standard form) */ 540 cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; 541 542 /* Check for valid Cable ID */ 543 if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || 544 (cable_id != icom_port->cable_id)) { 545 546 /* reload adapter code, pick up any potential changes in cable id */ 547 load_code(icom_port); 548 549 /* still no sign of cable, error out */ 550 raw_cable_id = readb(&icom_port->dram->cable_id); 551 cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; 552 if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || 553 (icom_port->cable_id == NO_CABLE)) 554 return -EIO; 555 } 556 557 /* 558 * Finally, clear and enable interrupts 559 */ 560 spin_lock_irqsave(&icom_lock, flags); 561 port = icom_port->port; 562 if (port >= ARRAY_SIZE(int_mask_tbl)) { 563 dev_err(&icom_port->adapter->pci_dev->dev, 564 "Invalid port assignment\n"); 565 goto unlock; 566 } 567 568 if (port == 0 || port == 1) 569 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; 570 else 571 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; 572 573 if (port == 0 || port == 2) 574 writew(0x00FF, icom_port->int_reg); 575 else 576 writew(0x3F00, icom_port->int_reg); 577 578 temp = readl(int_mask_tbl[port].global_int_mask); 579 writel(temp & ~int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); 580 581 /* write flush */ 582 readl(int_mask_tbl[port].global_int_mask); 583 584 unlock: 585 spin_unlock_irqrestore(&icom_lock, flags); 586 return 0; 587 } 588 589 static void shutdown(struct icom_port *icom_port) 590 { 591 unsigned long temp; 592 unsigned char cmdReg; 593 unsigned long flags; 594 int port; 595 596 spin_lock_irqsave(&icom_lock, flags); 597 trace(icom_port, "SHUTDOWN", 0); 598 599 /* 600 * disable all interrupts 601 */ 602 port = icom_port->port; 603 if (port >= ARRAY_SIZE(int_mask_tbl)) { 604 dev_err(&icom_port->adapter->pci_dev->dev, 605 "Invalid port assignment\n"); 606 goto unlock; 607 } 608 if (port == 0 || port == 1) 609 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; 610 else 611 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; 612 613 temp = readl(int_mask_tbl[port].global_int_mask); 614 writel(temp | int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); 615 616 /* write flush */ 617 readl(int_mask_tbl[port].global_int_mask); 618 619 unlock: 620 spin_unlock_irqrestore(&icom_lock, flags); 621 622 /* 623 * disable break condition 624 */ 625 cmdReg = readb(&icom_port->dram->CmdReg); 626 if (cmdReg & CMD_SND_BREAK) { 627 writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg); 628 } 629 } 630 631 static int icom_write(struct uart_port *port) 632 { 633 unsigned long data_count; 634 unsigned char cmdReg; 635 unsigned long offset; 636 int temp_tail = port->state->xmit.tail; 637 638 trace(ICOM_PORT, "WRITE", 0); 639 640 if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & 641 SA_FLAGS_READY_TO_XMIT) { 642 trace(ICOM_PORT, "WRITE_FULL", 0); 643 return 0; 644 } 645 646 data_count = 0; 647 while ((port->state->xmit.head != temp_tail) && 648 (data_count <= XMIT_BUFF_SZ)) { 649 650 ICOM_PORT->xmit_buf[data_count++] = 651 port->state->xmit.buf[temp_tail]; 652 653 temp_tail++; 654 temp_tail &= (UART_XMIT_SIZE - 1); 655 } 656 657 if (data_count) { 658 ICOM_PORT->statStg->xmit[0].flags = 659 cpu_to_le16(SA_FLAGS_READY_TO_XMIT); 660 ICOM_PORT->statStg->xmit[0].leLength = 661 cpu_to_le16(data_count); 662 offset = 663 (unsigned long) &ICOM_PORT->statStg->xmit[0] - 664 (unsigned long) ICOM_PORT->statStg; 665 *ICOM_PORT->xmitRestart = 666 cpu_to_le32(ICOM_PORT->statStg_pci + offset); 667 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 668 writeb(cmdReg | CMD_XMIT_RCV_ENABLE, 669 &ICOM_PORT->dram->CmdReg); 670 writeb(START_XMIT, &ICOM_PORT->dram->StartXmitCmd); 671 trace(ICOM_PORT, "WRITE_START", data_count); 672 /* write flush */ 673 readb(&ICOM_PORT->dram->StartXmitCmd); 674 } 675 676 return data_count; 677 } 678 679 static inline void check_modem_status(struct icom_port *icom_port) 680 { 681 static char old_status = 0; 682 char delta_status; 683 unsigned char status; 684 685 spin_lock(&icom_port->uart_port.lock); 686 687 /*modem input register */ 688 status = readb(&icom_port->dram->isr); 689 trace(icom_port, "CHECK_MODEM", status); 690 delta_status = status ^ old_status; 691 if (delta_status) { 692 if (delta_status & ICOM_RI) 693 icom_port->uart_port.icount.rng++; 694 if (delta_status & ICOM_DSR) 695 icom_port->uart_port.icount.dsr++; 696 if (delta_status & ICOM_DCD) 697 uart_handle_dcd_change(&icom_port->uart_port, 698 delta_status & ICOM_DCD); 699 if (delta_status & ICOM_CTS) 700 uart_handle_cts_change(&icom_port->uart_port, 701 delta_status & ICOM_CTS); 702 703 wake_up_interruptible(&icom_port->uart_port.state-> 704 port.delta_msr_wait); 705 old_status = status; 706 } 707 spin_unlock(&icom_port->uart_port.lock); 708 } 709 710 static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port) 711 { 712 unsigned short int count; 713 int i; 714 715 if (port_int_reg & (INT_XMIT_COMPLETED)) { 716 trace(icom_port, "XMIT_COMPLETE", 0); 717 718 /* clear buffer in use bit */ 719 icom_port->statStg->xmit[0].flags &= 720 cpu_to_le16(~SA_FLAGS_READY_TO_XMIT); 721 722 count = (unsigned short int) 723 cpu_to_le16(icom_port->statStg->xmit[0].leLength); 724 icom_port->uart_port.icount.tx += count; 725 726 for (i=0; i<count && 727 !uart_circ_empty(&icom_port->uart_port.state->xmit); i++) { 728 729 icom_port->uart_port.state->xmit.tail++; 730 icom_port->uart_port.state->xmit.tail &= 731 (UART_XMIT_SIZE - 1); 732 } 733 734 if (!icom_write(&icom_port->uart_port)) 735 /* activate write queue */ 736 uart_write_wakeup(&icom_port->uart_port); 737 } else 738 trace(icom_port, "XMIT_DISABLED", 0); 739 } 740 741 static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port) 742 { 743 short int count, rcv_buff; 744 struct tty_port *port = &icom_port->uart_port.state->port; 745 unsigned short int status; 746 struct uart_icount *icount; 747 unsigned long offset; 748 unsigned char flag; 749 750 trace(icom_port, "RCV_COMPLETE", 0); 751 rcv_buff = icom_port->next_rcv; 752 753 status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); 754 while (status & SA_FL_RCV_DONE) { 755 int first = -1; 756 757 trace(icom_port, "FID_STATUS", status); 758 count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength); 759 760 trace(icom_port, "RCV_COUNT", count); 761 762 trace(icom_port, "REAL_COUNT", count); 763 764 offset = 765 cpu_to_le32(icom_port->statStg->rcv[rcv_buff].leBuffer) - 766 icom_port->recv_buf_pci; 767 768 /* Block copy all but the last byte as this may have status */ 769 if (count > 0) { 770 first = icom_port->recv_buf[offset]; 771 tty_insert_flip_string(port, icom_port->recv_buf + offset, count - 1); 772 } 773 774 icount = &icom_port->uart_port.icount; 775 icount->rx += count; 776 777 /* Break detect logic */ 778 if ((status & SA_FLAGS_FRAME_ERROR) 779 && first == 0) { 780 status &= ~SA_FLAGS_FRAME_ERROR; 781 status |= SA_FLAGS_BREAK_DET; 782 trace(icom_port, "BREAK_DET", 0); 783 } 784 785 flag = TTY_NORMAL; 786 787 if (status & 788 (SA_FLAGS_BREAK_DET | SA_FLAGS_PARITY_ERROR | 789 SA_FLAGS_FRAME_ERROR | SA_FLAGS_OVERRUN)) { 790 791 if (status & SA_FLAGS_BREAK_DET) 792 icount->brk++; 793 if (status & SA_FLAGS_PARITY_ERROR) 794 icount->parity++; 795 if (status & SA_FLAGS_FRAME_ERROR) 796 icount->frame++; 797 if (status & SA_FLAGS_OVERRUN) 798 icount->overrun++; 799 800 /* 801 * Now check to see if character should be 802 * ignored, and mask off conditions which 803 * should be ignored. 804 */ 805 if (status & icom_port->ignore_status_mask) { 806 trace(icom_port, "IGNORE_CHAR", 0); 807 goto ignore_char; 808 } 809 810 status &= icom_port->read_status_mask; 811 812 if (status & SA_FLAGS_BREAK_DET) { 813 flag = TTY_BREAK; 814 } else if (status & SA_FLAGS_PARITY_ERROR) { 815 trace(icom_port, "PARITY_ERROR", 0); 816 flag = TTY_PARITY; 817 } else if (status & SA_FLAGS_FRAME_ERROR) 818 flag = TTY_FRAME; 819 820 } 821 822 tty_insert_flip_char(port, *(icom_port->recv_buf + offset + count - 1), flag); 823 824 if (status & SA_FLAGS_OVERRUN) 825 /* 826 * Overrun is special, since it's 827 * reported immediately, and doesn't 828 * affect the current character 829 */ 830 tty_insert_flip_char(port, 0, TTY_OVERRUN); 831 ignore_char: 832 icom_port->statStg->rcv[rcv_buff].flags = 0; 833 icom_port->statStg->rcv[rcv_buff].leLength = 0; 834 icom_port->statStg->rcv[rcv_buff].WorkingLength = 835 (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); 836 837 rcv_buff++; 838 if (rcv_buff == NUM_RBUFFS) 839 rcv_buff = 0; 840 841 status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); 842 } 843 icom_port->next_rcv = rcv_buff; 844 845 spin_unlock(&icom_port->uart_port.lock); 846 tty_flip_buffer_push(port); 847 spin_lock(&icom_port->uart_port.lock); 848 } 849 850 static void process_interrupt(u16 port_int_reg, 851 struct icom_port *icom_port) 852 { 853 854 spin_lock(&icom_port->uart_port.lock); 855 trace(icom_port, "INTERRUPT", port_int_reg); 856 857 if (port_int_reg & (INT_XMIT_COMPLETED | INT_XMIT_DISABLED)) 858 xmit_interrupt(port_int_reg, icom_port); 859 860 if (port_int_reg & INT_RCV_COMPLETED) 861 recv_interrupt(port_int_reg, icom_port); 862 863 spin_unlock(&icom_port->uart_port.lock); 864 } 865 866 static irqreturn_t icom_interrupt(int irq, void *dev_id) 867 { 868 void __iomem * int_reg; 869 u32 adapter_interrupts; 870 u16 port_int_reg; 871 struct icom_adapter *icom_adapter; 872 struct icom_port *icom_port; 873 874 /* find icom_port for this interrupt */ 875 icom_adapter = (struct icom_adapter *) dev_id; 876 877 if (icom_adapter->version == ADAPTER_V2) { 878 int_reg = icom_adapter->base_addr + 0x8024; 879 880 adapter_interrupts = readl(int_reg); 881 882 if (adapter_interrupts & 0x00003FFF) { 883 /* port 2 interrupt, NOTE: for all ADAPTER_V2, port 2 will be active */ 884 icom_port = &icom_adapter->port_info[2]; 885 port_int_reg = (u16) adapter_interrupts; 886 process_interrupt(port_int_reg, icom_port); 887 check_modem_status(icom_port); 888 } 889 if (adapter_interrupts & 0x3FFF0000) { 890 /* port 3 interrupt */ 891 icom_port = &icom_adapter->port_info[3]; 892 if (icom_port->status == ICOM_PORT_ACTIVE) { 893 port_int_reg = 894 (u16) (adapter_interrupts >> 16); 895 process_interrupt(port_int_reg, icom_port); 896 check_modem_status(icom_port); 897 } 898 } 899 900 /* Clear out any pending interrupts */ 901 writel(adapter_interrupts, int_reg); 902 903 int_reg = icom_adapter->base_addr + 0x8004; 904 } else { 905 int_reg = icom_adapter->base_addr + 0x4004; 906 } 907 908 adapter_interrupts = readl(int_reg); 909 910 if (adapter_interrupts & 0x00003FFF) { 911 /* port 0 interrupt, NOTE: for all adapters, port 0 will be active */ 912 icom_port = &icom_adapter->port_info[0]; 913 port_int_reg = (u16) adapter_interrupts; 914 process_interrupt(port_int_reg, icom_port); 915 check_modem_status(icom_port); 916 } 917 if (adapter_interrupts & 0x3FFF0000) { 918 /* port 1 interrupt */ 919 icom_port = &icom_adapter->port_info[1]; 920 if (icom_port->status == ICOM_PORT_ACTIVE) { 921 port_int_reg = (u16) (adapter_interrupts >> 16); 922 process_interrupt(port_int_reg, icom_port); 923 check_modem_status(icom_port); 924 } 925 } 926 927 /* Clear out any pending interrupts */ 928 writel(adapter_interrupts, int_reg); 929 930 /* flush the write */ 931 adapter_interrupts = readl(int_reg); 932 933 return IRQ_HANDLED; 934 } 935 936 /* 937 * ------------------------------------------------------------------ 938 * Begin serial-core API 939 * ------------------------------------------------------------------ 940 */ 941 static unsigned int icom_tx_empty(struct uart_port *port) 942 { 943 int ret; 944 unsigned long flags; 945 946 spin_lock_irqsave(&port->lock, flags); 947 if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & 948 SA_FLAGS_READY_TO_XMIT) 949 ret = TIOCSER_TEMT; 950 else 951 ret = 0; 952 953 spin_unlock_irqrestore(&port->lock, flags); 954 return ret; 955 } 956 957 static void icom_set_mctrl(struct uart_port *port, unsigned int mctrl) 958 { 959 unsigned char local_osr; 960 961 trace(ICOM_PORT, "SET_MODEM", 0); 962 local_osr = readb(&ICOM_PORT->dram->osr); 963 964 if (mctrl & TIOCM_RTS) { 965 trace(ICOM_PORT, "RAISE_RTS", 0); 966 local_osr |= ICOM_RTS; 967 } else { 968 trace(ICOM_PORT, "LOWER_RTS", 0); 969 local_osr &= ~ICOM_RTS; 970 } 971 972 if (mctrl & TIOCM_DTR) { 973 trace(ICOM_PORT, "RAISE_DTR", 0); 974 local_osr |= ICOM_DTR; 975 } else { 976 trace(ICOM_PORT, "LOWER_DTR", 0); 977 local_osr &= ~ICOM_DTR; 978 } 979 980 writeb(local_osr, &ICOM_PORT->dram->osr); 981 } 982 983 static unsigned int icom_get_mctrl(struct uart_port *port) 984 { 985 unsigned char status; 986 unsigned int result; 987 988 trace(ICOM_PORT, "GET_MODEM", 0); 989 990 status = readb(&ICOM_PORT->dram->isr); 991 992 result = ((status & ICOM_DCD) ? TIOCM_CAR : 0) 993 | ((status & ICOM_RI) ? TIOCM_RNG : 0) 994 | ((status & ICOM_DSR) ? TIOCM_DSR : 0) 995 | ((status & ICOM_CTS) ? TIOCM_CTS : 0); 996 return result; 997 } 998 999 static void icom_stop_tx(struct uart_port *port) 1000 { 1001 unsigned char cmdReg; 1002 1003 trace(ICOM_PORT, "STOP", 0); 1004 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 1005 writeb(cmdReg | CMD_HOLD_XMIT, &ICOM_PORT->dram->CmdReg); 1006 } 1007 1008 static void icom_start_tx(struct uart_port *port) 1009 { 1010 unsigned char cmdReg; 1011 1012 trace(ICOM_PORT, "START", 0); 1013 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 1014 if ((cmdReg & CMD_HOLD_XMIT) == CMD_HOLD_XMIT) 1015 writeb(cmdReg & ~CMD_HOLD_XMIT, 1016 &ICOM_PORT->dram->CmdReg); 1017 1018 icom_write(port); 1019 } 1020 1021 static void icom_send_xchar(struct uart_port *port, char ch) 1022 { 1023 unsigned char xdata; 1024 int index; 1025 unsigned long flags; 1026 1027 trace(ICOM_PORT, "SEND_XCHAR", ch); 1028 1029 /* wait .1 sec to send char */ 1030 for (index = 0; index < 10; index++) { 1031 spin_lock_irqsave(&port->lock, flags); 1032 xdata = readb(&ICOM_PORT->dram->xchar); 1033 if (xdata == 0x00) { 1034 trace(ICOM_PORT, "QUICK_WRITE", 0); 1035 writeb(ch, &ICOM_PORT->dram->xchar); 1036 1037 /* flush write operation */ 1038 xdata = readb(&ICOM_PORT->dram->xchar); 1039 spin_unlock_irqrestore(&port->lock, flags); 1040 break; 1041 } 1042 spin_unlock_irqrestore(&port->lock, flags); 1043 msleep(10); 1044 } 1045 } 1046 1047 static void icom_stop_rx(struct uart_port *port) 1048 { 1049 unsigned char cmdReg; 1050 1051 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 1052 writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); 1053 } 1054 1055 static void icom_break(struct uart_port *port, int break_state) 1056 { 1057 unsigned char cmdReg; 1058 unsigned long flags; 1059 1060 spin_lock_irqsave(&port->lock, flags); 1061 trace(ICOM_PORT, "BREAK", 0); 1062 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 1063 if (break_state == -1) { 1064 writeb(cmdReg | CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); 1065 } else { 1066 writeb(cmdReg & ~CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); 1067 } 1068 spin_unlock_irqrestore(&port->lock, flags); 1069 } 1070 1071 static int icom_open(struct uart_port *port) 1072 { 1073 int retval; 1074 1075 kref_get(&ICOM_PORT->adapter->kref); 1076 retval = startup(ICOM_PORT); 1077 1078 if (retval) { 1079 kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); 1080 trace(ICOM_PORT, "STARTUP_ERROR", 0); 1081 return retval; 1082 } 1083 1084 return 0; 1085 } 1086 1087 static void icom_close(struct uart_port *port) 1088 { 1089 unsigned char cmdReg; 1090 1091 trace(ICOM_PORT, "CLOSE", 0); 1092 1093 /* stop receiver */ 1094 cmdReg = readb(&ICOM_PORT->dram->CmdReg); 1095 writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); 1096 1097 shutdown(ICOM_PORT); 1098 1099 kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); 1100 } 1101 1102 static void icom_set_termios(struct uart_port *port, 1103 struct ktermios *termios, 1104 struct ktermios *old_termios) 1105 { 1106 int baud; 1107 unsigned cflag, iflag; 1108 char new_config2; 1109 char new_config3 = 0; 1110 char tmp_byte; 1111 int index; 1112 int rcv_buff, xmit_buff; 1113 unsigned long offset; 1114 unsigned long flags; 1115 1116 spin_lock_irqsave(&port->lock, flags); 1117 trace(ICOM_PORT, "CHANGE_SPEED", 0); 1118 1119 cflag = termios->c_cflag; 1120 iflag = termios->c_iflag; 1121 1122 new_config2 = ICOM_ACFG_DRIVE1; 1123 1124 /* byte size and parity */ 1125 switch (cflag & CSIZE) { 1126 case CS5: /* 5 bits/char */ 1127 new_config2 |= ICOM_ACFG_5BPC; 1128 break; 1129 case CS6: /* 6 bits/char */ 1130 new_config2 |= ICOM_ACFG_6BPC; 1131 break; 1132 case CS7: /* 7 bits/char */ 1133 new_config2 |= ICOM_ACFG_7BPC; 1134 break; 1135 case CS8: /* 8 bits/char */ 1136 new_config2 |= ICOM_ACFG_8BPC; 1137 break; 1138 default: 1139 break; 1140 } 1141 if (cflag & CSTOPB) { 1142 /* 2 stop bits */ 1143 new_config2 |= ICOM_ACFG_2STOP_BIT; 1144 } 1145 if (cflag & PARENB) { 1146 /* parity bit enabled */ 1147 new_config2 |= ICOM_ACFG_PARITY_ENAB; 1148 trace(ICOM_PORT, "PARENB", 0); 1149 } 1150 if (cflag & PARODD) { 1151 /* odd parity */ 1152 new_config2 |= ICOM_ACFG_PARITY_ODD; 1153 trace(ICOM_PORT, "PARODD", 0); 1154 } 1155 1156 /* Determine divisor based on baud rate */ 1157 baud = uart_get_baud_rate(port, termios, old_termios, 1158 icom_acfg_baud[0], 1159 icom_acfg_baud[BAUD_TABLE_LIMIT]); 1160 if (!baud) 1161 baud = 9600; /* B0 transition handled in rs_set_termios */ 1162 1163 for (index = 0; index < BAUD_TABLE_LIMIT; index++) { 1164 if (icom_acfg_baud[index] == baud) { 1165 new_config3 = index; 1166 break; 1167 } 1168 } 1169 1170 uart_update_timeout(port, cflag, baud); 1171 1172 /* CTS flow control flag and modem status interrupts */ 1173 tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); 1174 if (cflag & CRTSCTS) 1175 tmp_byte |= HDLC_HDW_FLOW; 1176 else 1177 tmp_byte &= ~HDLC_HDW_FLOW; 1178 writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); 1179 1180 /* 1181 * Set up parity check flag 1182 */ 1183 ICOM_PORT->read_status_mask = SA_FLAGS_OVERRUN | SA_FL_RCV_DONE; 1184 if (iflag & INPCK) 1185 ICOM_PORT->read_status_mask |= 1186 SA_FLAGS_FRAME_ERROR | SA_FLAGS_PARITY_ERROR; 1187 1188 if ((iflag & BRKINT) || (iflag & PARMRK)) 1189 ICOM_PORT->read_status_mask |= SA_FLAGS_BREAK_DET; 1190 1191 /* 1192 * Characters to ignore 1193 */ 1194 ICOM_PORT->ignore_status_mask = 0; 1195 if (iflag & IGNPAR) 1196 ICOM_PORT->ignore_status_mask |= 1197 SA_FLAGS_PARITY_ERROR | SA_FLAGS_FRAME_ERROR; 1198 if (iflag & IGNBRK) { 1199 ICOM_PORT->ignore_status_mask |= SA_FLAGS_BREAK_DET; 1200 /* 1201 * If we're ignore parity and break indicators, ignore 1202 * overruns too. (For real raw support). 1203 */ 1204 if (iflag & IGNPAR) 1205 ICOM_PORT->ignore_status_mask |= SA_FLAGS_OVERRUN; 1206 } 1207 1208 /* 1209 * !!! ignore all characters if CREAD is not set 1210 */ 1211 if ((cflag & CREAD) == 0) 1212 ICOM_PORT->ignore_status_mask |= SA_FL_RCV_DONE; 1213 1214 /* Turn off Receiver to prepare for reset */ 1215 writeb(CMD_RCV_DISABLE, &ICOM_PORT->dram->CmdReg); 1216 1217 for (index = 0; index < 10; index++) { 1218 if (readb(&ICOM_PORT->dram->PrevCmdReg) == 0x00) { 1219 break; 1220 } 1221 } 1222 1223 /* clear all current buffers of data */ 1224 for (rcv_buff = 0; rcv_buff < NUM_RBUFFS; rcv_buff++) { 1225 ICOM_PORT->statStg->rcv[rcv_buff].flags = 0; 1226 ICOM_PORT->statStg->rcv[rcv_buff].leLength = 0; 1227 ICOM_PORT->statStg->rcv[rcv_buff].WorkingLength = 1228 (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); 1229 } 1230 1231 for (xmit_buff = 0; xmit_buff < NUM_XBUFFS; xmit_buff++) { 1232 ICOM_PORT->statStg->xmit[xmit_buff].flags = 0; 1233 } 1234 1235 /* activate changes and start xmit and receiver here */ 1236 /* Enable the receiver */ 1237 writeb(new_config3, &(ICOM_PORT->dram->async_config3)); 1238 writeb(new_config2, &(ICOM_PORT->dram->async_config2)); 1239 tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); 1240 tmp_byte |= HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL; 1241 writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); 1242 writeb(0x04, &(ICOM_PORT->dram->FlagFillIdleTimer)); /* 0.5 seconds */ 1243 writeb(0xFF, &(ICOM_PORT->dram->ier)); /* enable modem signal interrupts */ 1244 1245 /* reset processor */ 1246 writeb(CMD_RESTART, &ICOM_PORT->dram->CmdReg); 1247 1248 for (index = 0; index < 10; index++) { 1249 if (readb(&ICOM_PORT->dram->CmdReg) == 0x00) { 1250 break; 1251 } 1252 } 1253 1254 /* Enable Transmitter and Receiver */ 1255 offset = 1256 (unsigned long) &ICOM_PORT->statStg->rcv[0] - 1257 (unsigned long) ICOM_PORT->statStg; 1258 writel(ICOM_PORT->statStg_pci + offset, 1259 &ICOM_PORT->dram->RcvStatusAddr); 1260 ICOM_PORT->next_rcv = 0; 1261 ICOM_PORT->put_length = 0; 1262 *ICOM_PORT->xmitRestart = 0; 1263 writel(ICOM_PORT->xmitRestart_pci, 1264 &ICOM_PORT->dram->XmitStatusAddr); 1265 trace(ICOM_PORT, "XR_ENAB", 0); 1266 writeb(CMD_XMIT_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); 1267 1268 spin_unlock_irqrestore(&port->lock, flags); 1269 } 1270 1271 static const char *icom_type(struct uart_port *port) 1272 { 1273 return "icom"; 1274 } 1275 1276 static void icom_release_port(struct uart_port *port) 1277 { 1278 } 1279 1280 static int icom_request_port(struct uart_port *port) 1281 { 1282 return 0; 1283 } 1284 1285 static void icom_config_port(struct uart_port *port, int flags) 1286 { 1287 port->type = PORT_ICOM; 1288 } 1289 1290 static struct uart_ops icom_ops = { 1291 .tx_empty = icom_tx_empty, 1292 .set_mctrl = icom_set_mctrl, 1293 .get_mctrl = icom_get_mctrl, 1294 .stop_tx = icom_stop_tx, 1295 .start_tx = icom_start_tx, 1296 .send_xchar = icom_send_xchar, 1297 .stop_rx = icom_stop_rx, 1298 .break_ctl = icom_break, 1299 .startup = icom_open, 1300 .shutdown = icom_close, 1301 .set_termios = icom_set_termios, 1302 .type = icom_type, 1303 .release_port = icom_release_port, 1304 .request_port = icom_request_port, 1305 .config_port = icom_config_port, 1306 }; 1307 1308 #define ICOM_CONSOLE NULL 1309 1310 static struct uart_driver icom_uart_driver = { 1311 .owner = THIS_MODULE, 1312 .driver_name = ICOM_DRIVER_NAME, 1313 .dev_name = "ttyA", 1314 .major = ICOM_MAJOR, 1315 .minor = ICOM_MINOR_START, 1316 .nr = NR_PORTS, 1317 .cons = ICOM_CONSOLE, 1318 }; 1319 1320 static int icom_init_ports(struct icom_adapter *icom_adapter) 1321 { 1322 u32 subsystem_id = icom_adapter->subsystem_id; 1323 int i; 1324 struct icom_port *icom_port; 1325 1326 if (icom_adapter->version == ADAPTER_V1) { 1327 icom_adapter->numb_ports = 2; 1328 1329 for (i = 0; i < 2; i++) { 1330 icom_port = &icom_adapter->port_info[i]; 1331 icom_port->port = i; 1332 icom_port->status = ICOM_PORT_ACTIVE; 1333 icom_port->imbed_modem = ICOM_UNKNOWN; 1334 } 1335 } else { 1336 if (subsystem_id == PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL) { 1337 icom_adapter->numb_ports = 4; 1338 1339 for (i = 0; i < 4; i++) { 1340 icom_port = &icom_adapter->port_info[i]; 1341 1342 icom_port->port = i; 1343 icom_port->status = ICOM_PORT_ACTIVE; 1344 icom_port->imbed_modem = ICOM_IMBED_MODEM; 1345 } 1346 } else { 1347 icom_adapter->numb_ports = 4; 1348 1349 icom_adapter->port_info[0].port = 0; 1350 icom_adapter->port_info[0].status = ICOM_PORT_ACTIVE; 1351 1352 if (subsystem_id == 1353 PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM) { 1354 icom_adapter->port_info[0].imbed_modem = ICOM_IMBED_MODEM; 1355 } else { 1356 icom_adapter->port_info[0].imbed_modem = ICOM_RVX; 1357 } 1358 1359 icom_adapter->port_info[1].status = ICOM_PORT_OFF; 1360 1361 icom_adapter->port_info[2].port = 2; 1362 icom_adapter->port_info[2].status = ICOM_PORT_ACTIVE; 1363 icom_adapter->port_info[2].imbed_modem = ICOM_RVX; 1364 icom_adapter->port_info[3].status = ICOM_PORT_OFF; 1365 } 1366 } 1367 1368 return 0; 1369 } 1370 1371 static void icom_port_active(struct icom_port *icom_port, struct icom_adapter *icom_adapter, int port_num) 1372 { 1373 if (icom_adapter->version == ADAPTER_V1) { 1374 icom_port->global_reg = icom_adapter->base_addr + 0x4000; 1375 icom_port->int_reg = icom_adapter->base_addr + 1376 0x4004 + 2 - 2 * port_num; 1377 } else { 1378 icom_port->global_reg = icom_adapter->base_addr + 0x8000; 1379 if (icom_port->port < 2) 1380 icom_port->int_reg = icom_adapter->base_addr + 1381 0x8004 + 2 - 2 * icom_port->port; 1382 else 1383 icom_port->int_reg = icom_adapter->base_addr + 1384 0x8024 + 2 - 2 * (icom_port->port - 2); 1385 } 1386 } 1387 static int icom_load_ports(struct icom_adapter *icom_adapter) 1388 { 1389 struct icom_port *icom_port; 1390 int port_num; 1391 1392 for (port_num = 0; port_num < icom_adapter->numb_ports; port_num++) { 1393 1394 icom_port = &icom_adapter->port_info[port_num]; 1395 1396 if (icom_port->status == ICOM_PORT_ACTIVE) { 1397 icom_port_active(icom_port, icom_adapter, port_num); 1398 icom_port->dram = icom_adapter->base_addr + 1399 0x2000 * icom_port->port; 1400 1401 icom_port->adapter = icom_adapter; 1402 1403 /* get port memory */ 1404 if (get_port_memory(icom_port) != 0) { 1405 dev_err(&icom_port->adapter->pci_dev->dev, 1406 "Memory allocation for port FAILED\n"); 1407 } 1408 } 1409 } 1410 return 0; 1411 } 1412 1413 static int icom_alloc_adapter(struct icom_adapter 1414 **icom_adapter_ref) 1415 { 1416 int adapter_count = 0; 1417 struct icom_adapter *icom_adapter; 1418 struct icom_adapter *cur_adapter_entry; 1419 struct list_head *tmp; 1420 1421 icom_adapter = kzalloc(sizeof(struct icom_adapter), GFP_KERNEL); 1422 1423 if (!icom_adapter) { 1424 return -ENOMEM; 1425 } 1426 1427 list_for_each(tmp, &icom_adapter_head) { 1428 cur_adapter_entry = 1429 list_entry(tmp, struct icom_adapter, 1430 icom_adapter_entry); 1431 if (cur_adapter_entry->index != adapter_count) { 1432 break; 1433 } 1434 adapter_count++; 1435 } 1436 1437 icom_adapter->index = adapter_count; 1438 list_add_tail(&icom_adapter->icom_adapter_entry, tmp); 1439 1440 *icom_adapter_ref = icom_adapter; 1441 return 0; 1442 } 1443 1444 static void icom_free_adapter(struct icom_adapter *icom_adapter) 1445 { 1446 list_del(&icom_adapter->icom_adapter_entry); 1447 kfree(icom_adapter); 1448 } 1449 1450 static void icom_remove_adapter(struct icom_adapter *icom_adapter) 1451 { 1452 struct icom_port *icom_port; 1453 int index; 1454 1455 for (index = 0; index < icom_adapter->numb_ports; index++) { 1456 icom_port = &icom_adapter->port_info[index]; 1457 1458 if (icom_port->status == ICOM_PORT_ACTIVE) { 1459 dev_info(&icom_adapter->pci_dev->dev, 1460 "Device removed\n"); 1461 1462 uart_remove_one_port(&icom_uart_driver, 1463 &icom_port->uart_port); 1464 1465 /* be sure that DTR and RTS are dropped */ 1466 writeb(0x00, &icom_port->dram->osr); 1467 1468 /* Wait 0.1 Sec for simple Init to complete */ 1469 msleep(100); 1470 1471 /* Stop proccessor */ 1472 stop_processor(icom_port); 1473 1474 free_port_memory(icom_port); 1475 } 1476 } 1477 1478 free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter); 1479 iounmap(icom_adapter->base_addr); 1480 pci_release_regions(icom_adapter->pci_dev); 1481 icom_free_adapter(icom_adapter); 1482 } 1483 1484 static void icom_kref_release(struct kref *kref) 1485 { 1486 struct icom_adapter *icom_adapter; 1487 1488 icom_adapter = to_icom_adapter(kref); 1489 icom_remove_adapter(icom_adapter); 1490 } 1491 1492 static int icom_probe(struct pci_dev *dev, 1493 const struct pci_device_id *ent) 1494 { 1495 int index; 1496 unsigned int command_reg; 1497 int retval; 1498 struct icom_adapter *icom_adapter; 1499 struct icom_port *icom_port; 1500 1501 retval = pci_enable_device(dev); 1502 if (retval) { 1503 dev_err(&dev->dev, "Device enable FAILED\n"); 1504 return retval; 1505 } 1506 1507 if ( (retval = pci_request_regions(dev, "icom"))) { 1508 dev_err(&dev->dev, "pci_request_regions FAILED\n"); 1509 pci_disable_device(dev); 1510 return retval; 1511 } 1512 1513 pci_set_master(dev); 1514 1515 if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) { 1516 dev_err(&dev->dev, "PCI Config read FAILED\n"); 1517 return retval; 1518 } 1519 1520 pci_write_config_dword(dev, PCI_COMMAND, 1521 command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER 1522 | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); 1523 1524 if (ent->driver_data == ADAPTER_V1) { 1525 pci_write_config_dword(dev, 0x44, 0x8300830A); 1526 } else { 1527 pci_write_config_dword(dev, 0x44, 0x42004200); 1528 pci_write_config_dword(dev, 0x48, 0x42004200); 1529 } 1530 1531 1532 retval = icom_alloc_adapter(&icom_adapter); 1533 if (retval) { 1534 dev_err(&dev->dev, "icom_alloc_adapter FAILED\n"); 1535 retval = -EIO; 1536 goto probe_exit0; 1537 } 1538 1539 icom_adapter->base_addr_pci = pci_resource_start(dev, 0); 1540 icom_adapter->pci_dev = dev; 1541 icom_adapter->version = ent->driver_data; 1542 icom_adapter->subsystem_id = ent->subdevice; 1543 1544 1545 retval = icom_init_ports(icom_adapter); 1546 if (retval) { 1547 dev_err(&dev->dev, "Port configuration failed\n"); 1548 goto probe_exit1; 1549 } 1550 1551 icom_adapter->base_addr = pci_ioremap_bar(dev, 0); 1552 1553 if (!icom_adapter->base_addr) 1554 goto probe_exit1; 1555 1556 /* save off irq and request irq line */ 1557 if ( (retval = request_irq(dev->irq, icom_interrupt, 1558 IRQF_SHARED, ICOM_DRIVER_NAME, 1559 (void *) icom_adapter))) { 1560 goto probe_exit2; 1561 } 1562 1563 retval = icom_load_ports(icom_adapter); 1564 1565 for (index = 0; index < icom_adapter->numb_ports; index++) { 1566 icom_port = &icom_adapter->port_info[index]; 1567 1568 if (icom_port->status == ICOM_PORT_ACTIVE) { 1569 icom_port->uart_port.irq = icom_port->adapter->pci_dev->irq; 1570 icom_port->uart_port.type = PORT_ICOM; 1571 icom_port->uart_port.iotype = UPIO_MEM; 1572 icom_port->uart_port.membase = 1573 (unsigned char __iomem *)icom_adapter->base_addr_pci; 1574 icom_port->uart_port.fifosize = 16; 1575 icom_port->uart_port.ops = &icom_ops; 1576 icom_port->uart_port.line = 1577 icom_port->port + icom_adapter->index * 4; 1578 if (uart_add_one_port (&icom_uart_driver, &icom_port->uart_port)) { 1579 icom_port->status = ICOM_PORT_OFF; 1580 dev_err(&dev->dev, "Device add failed\n"); 1581 } else 1582 dev_info(&dev->dev, "Device added\n"); 1583 } 1584 } 1585 1586 kref_init(&icom_adapter->kref); 1587 return 0; 1588 1589 probe_exit2: 1590 iounmap(icom_adapter->base_addr); 1591 probe_exit1: 1592 icom_free_adapter(icom_adapter); 1593 1594 probe_exit0: 1595 pci_release_regions(dev); 1596 pci_disable_device(dev); 1597 1598 return retval; 1599 } 1600 1601 static void icom_remove(struct pci_dev *dev) 1602 { 1603 struct icom_adapter *icom_adapter; 1604 struct list_head *tmp; 1605 1606 list_for_each(tmp, &icom_adapter_head) { 1607 icom_adapter = list_entry(tmp, struct icom_adapter, 1608 icom_adapter_entry); 1609 if (icom_adapter->pci_dev == dev) { 1610 kref_put(&icom_adapter->kref, icom_kref_release); 1611 return; 1612 } 1613 } 1614 1615 dev_err(&dev->dev, "Unable to find device to remove\n"); 1616 } 1617 1618 static struct pci_driver icom_pci_driver = { 1619 .name = ICOM_DRIVER_NAME, 1620 .id_table = icom_pci_table, 1621 .probe = icom_probe, 1622 .remove = icom_remove, 1623 }; 1624 1625 static int __init icom_init(void) 1626 { 1627 int ret; 1628 1629 spin_lock_init(&icom_lock); 1630 1631 ret = uart_register_driver(&icom_uart_driver); 1632 if (ret) 1633 return ret; 1634 1635 ret = pci_register_driver(&icom_pci_driver); 1636 1637 if (ret < 0) 1638 uart_unregister_driver(&icom_uart_driver); 1639 1640 return ret; 1641 } 1642 1643 static void __exit icom_exit(void) 1644 { 1645 pci_unregister_driver(&icom_pci_driver); 1646 uart_unregister_driver(&icom_uart_driver); 1647 } 1648 1649 module_init(icom_init); 1650 module_exit(icom_exit); 1651 1652 MODULE_AUTHOR("Michael Anderson <mjanders@us.ibm.com>"); 1653 MODULE_DESCRIPTION("IBM iSeries Serial IOA driver"); 1654 MODULE_SUPPORTED_DEVICE 1655 ("IBM iSeries 2745, 2771, 2772, 2742, 2793 and 2805 Communications adapters"); 1656 MODULE_LICENSE("GPL"); 1657 MODULE_FIRMWARE("icom_call_setup.bin"); 1658 MODULE_FIRMWARE("icom_res_dce.bin"); 1659 MODULE_FIRMWARE("icom_asc.bin"); 1660