1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Freescale LINFlexD UART serial port driver
4  *
5  * Copyright 2012-2016 Freescale Semiconductor, Inc.
6  * Copyright 2017-2019 NXP
7  */
8 
9 #include <linux/console.h>
10 #include <linux/io.h>
11 #include <linux/irq.h>
12 #include <linux/module.h>
13 #include <linux/of.h>
14 #include <linux/of_device.h>
15 #include <linux/serial_core.h>
16 #include <linux/slab.h>
17 #include <linux/tty_flip.h>
18 #include <linux/delay.h>
19 
20 /* All registers are 32-bit width */
21 
22 #define LINCR1	0x0000	/* LIN control register				*/
23 #define LINIER	0x0004	/* LIN interrupt enable register		*/
24 #define LINSR	0x0008	/* LIN status register				*/
25 #define LINESR	0x000C	/* LIN error status register			*/
26 #define UARTCR	0x0010	/* UART mode control register			*/
27 #define UARTSR	0x0014	/* UART mode status register			*/
28 #define LINTCSR	0x0018	/* LIN timeout control status register		*/
29 #define LINOCR	0x001C	/* LIN output compare register			*/
30 #define LINTOCR	0x0020	/* LIN timeout control register			*/
31 #define LINFBRR	0x0024	/* LIN fractional baud rate register		*/
32 #define LINIBRR	0x0028	/* LIN integer baud rate register		*/
33 #define LINCFR	0x002C	/* LIN checksum field register			*/
34 #define LINCR2	0x0030	/* LIN control register 2			*/
35 #define BIDR	0x0034	/* Buffer identifier register			*/
36 #define BDRL	0x0038	/* Buffer data register least significant	*/
37 #define BDRM	0x003C	/* Buffer data register most significant	*/
38 #define IFER	0x0040	/* Identifier filter enable register		*/
39 #define IFMI	0x0044	/* Identifier filter match index		*/
40 #define IFMR	0x0048	/* Identifier filter mode register		*/
41 #define GCR	0x004C	/* Global control register			*/
42 #define UARTPTO	0x0050	/* UART preset timeout register			*/
43 #define UARTCTO	0x0054	/* UART current timeout register		*/
44 
45 /*
46  * Register field definitions
47  */
48 
49 #define LINFLEXD_LINCR1_INIT		BIT(0)
50 #define LINFLEXD_LINCR1_MME		BIT(4)
51 #define LINFLEXD_LINCR1_BF		BIT(7)
52 
53 #define LINFLEXD_LINSR_LINS_INITMODE	BIT(12)
54 #define LINFLEXD_LINSR_LINS_MASK	(0xF << 12)
55 
56 #define LINFLEXD_LINIER_SZIE		BIT(15)
57 #define LINFLEXD_LINIER_OCIE		BIT(14)
58 #define LINFLEXD_LINIER_BEIE		BIT(13)
59 #define LINFLEXD_LINIER_CEIE		BIT(12)
60 #define LINFLEXD_LINIER_HEIE		BIT(11)
61 #define LINFLEXD_LINIER_FEIE		BIT(8)
62 #define LINFLEXD_LINIER_BOIE		BIT(7)
63 #define LINFLEXD_LINIER_LSIE		BIT(6)
64 #define LINFLEXD_LINIER_WUIE		BIT(5)
65 #define LINFLEXD_LINIER_DBFIE		BIT(4)
66 #define LINFLEXD_LINIER_DBEIETOIE	BIT(3)
67 #define LINFLEXD_LINIER_DRIE		BIT(2)
68 #define LINFLEXD_LINIER_DTIE		BIT(1)
69 #define LINFLEXD_LINIER_HRIE		BIT(0)
70 
71 #define LINFLEXD_UARTCR_OSR_MASK	(0xF << 24)
72 #define LINFLEXD_UARTCR_OSR(uartcr)	(((uartcr) \
73 					& LINFLEXD_UARTCR_OSR_MASK) >> 24)
74 
75 #define LINFLEXD_UARTCR_ROSE		BIT(23)
76 
77 #define LINFLEXD_UARTCR_RFBM		BIT(9)
78 #define LINFLEXD_UARTCR_TFBM		BIT(8)
79 #define LINFLEXD_UARTCR_WL1		BIT(7)
80 #define LINFLEXD_UARTCR_PC1		BIT(6)
81 
82 #define LINFLEXD_UARTCR_RXEN		BIT(5)
83 #define LINFLEXD_UARTCR_TXEN		BIT(4)
84 #define LINFLEXD_UARTCR_PC0		BIT(3)
85 
86 #define LINFLEXD_UARTCR_PCE		BIT(2)
87 #define LINFLEXD_UARTCR_WL0		BIT(1)
88 #define LINFLEXD_UARTCR_UART		BIT(0)
89 
90 #define LINFLEXD_UARTSR_SZF		BIT(15)
91 #define LINFLEXD_UARTSR_OCF		BIT(14)
92 #define LINFLEXD_UARTSR_PE3		BIT(13)
93 #define LINFLEXD_UARTSR_PE2		BIT(12)
94 #define LINFLEXD_UARTSR_PE1		BIT(11)
95 #define LINFLEXD_UARTSR_PE0		BIT(10)
96 #define LINFLEXD_UARTSR_RMB		BIT(9)
97 #define LINFLEXD_UARTSR_FEF		BIT(8)
98 #define LINFLEXD_UARTSR_BOF		BIT(7)
99 #define LINFLEXD_UARTSR_RPS		BIT(6)
100 #define LINFLEXD_UARTSR_WUF		BIT(5)
101 #define LINFLEXD_UARTSR_4		BIT(4)
102 
103 #define LINFLEXD_UARTSR_TO		BIT(3)
104 
105 #define LINFLEXD_UARTSR_DRFRFE		BIT(2)
106 #define LINFLEXD_UARTSR_DTFTFF		BIT(1)
107 #define LINFLEXD_UARTSR_NF		BIT(0)
108 #define LINFLEXD_UARTSR_PE		(LINFLEXD_UARTSR_PE0 |\
109 					 LINFLEXD_UARTSR_PE1 |\
110 					 LINFLEXD_UARTSR_PE2 |\
111 					 LINFLEXD_UARTSR_PE3)
112 
113 #define LINFLEX_LDIV_MULTIPLIER		(16)
114 
115 #define DRIVER_NAME	"fsl-linflexuart"
116 #define DEV_NAME	"ttyLF"
117 #define UART_NR		4
118 
119 #define EARLYCON_BUFFER_INITIAL_CAP	8
120 
121 #define PREINIT_DELAY			2000 /* us */
122 
123 static const struct of_device_id linflex_dt_ids[] = {
124 	{
125 		.compatible = "fsl,s32v234-linflexuart",
126 	},
127 	{ /* sentinel */ }
128 };
129 MODULE_DEVICE_TABLE(of, linflex_dt_ids);
130 
131 #ifdef CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE
132 static struct uart_port *earlycon_port;
133 static bool linflex_earlycon_same_instance;
134 static DEFINE_SPINLOCK(init_lock);
135 static bool during_init;
136 
137 static struct {
138 	char *content;
139 	unsigned int len, cap;
140 } earlycon_buf;
141 #endif
142 
143 static void linflex_stop_tx(struct uart_port *port)
144 {
145 	unsigned long ier;
146 
147 	ier = readl(port->membase + LINIER);
148 	ier &= ~(LINFLEXD_LINIER_DTIE);
149 	writel(ier, port->membase + LINIER);
150 }
151 
152 static void linflex_stop_rx(struct uart_port *port)
153 {
154 	unsigned long ier;
155 
156 	ier = readl(port->membase + LINIER);
157 	writel(ier & ~LINFLEXD_LINIER_DRIE, port->membase + LINIER);
158 }
159 
160 static inline void linflex_transmit_buffer(struct uart_port *sport)
161 {
162 	struct circ_buf *xmit = &sport->state->xmit;
163 	unsigned char c;
164 	unsigned long status;
165 
166 	while (!uart_circ_empty(xmit)) {
167 		c = xmit->buf[xmit->tail];
168 		writeb(c, sport->membase + BDRL);
169 
170 		/* Waiting for data transmission completed. */
171 		while (((status = readl(sport->membase + UARTSR)) &
172 					LINFLEXD_UARTSR_DTFTFF) !=
173 					LINFLEXD_UARTSR_DTFTFF)
174 			;
175 
176 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
177 		sport->icount.tx++;
178 
179 		writel(status | LINFLEXD_UARTSR_DTFTFF,
180 		       sport->membase + UARTSR);
181 	}
182 
183 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
184 		uart_write_wakeup(sport);
185 
186 	if (uart_circ_empty(xmit))
187 		linflex_stop_tx(sport);
188 }
189 
190 static void linflex_start_tx(struct uart_port *port)
191 {
192 	unsigned long ier;
193 
194 	linflex_transmit_buffer(port);
195 	ier = readl(port->membase + LINIER);
196 	writel(ier | LINFLEXD_LINIER_DTIE, port->membase + LINIER);
197 }
198 
199 static irqreturn_t linflex_txint(int irq, void *dev_id)
200 {
201 	struct uart_port *sport = dev_id;
202 	struct circ_buf *xmit = &sport->state->xmit;
203 	unsigned long flags;
204 	unsigned long status;
205 
206 	spin_lock_irqsave(&sport->lock, flags);
207 
208 	if (sport->x_char) {
209 		writeb(sport->x_char, sport->membase + BDRL);
210 
211 		/* waiting for data transmission completed */
212 		while (((status = readl(sport->membase + UARTSR)) &
213 			LINFLEXD_UARTSR_DTFTFF) != LINFLEXD_UARTSR_DTFTFF)
214 			;
215 
216 		writel(status | LINFLEXD_UARTSR_DTFTFF,
217 		       sport->membase + UARTSR);
218 
219 		goto out;
220 	}
221 
222 	if (uart_circ_empty(xmit) || uart_tx_stopped(sport)) {
223 		linflex_stop_tx(sport);
224 		goto out;
225 	}
226 
227 	linflex_transmit_buffer(sport);
228 
229 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
230 		uart_write_wakeup(sport);
231 
232 out:
233 	spin_unlock_irqrestore(&sport->lock, flags);
234 	return IRQ_HANDLED;
235 }
236 
237 static irqreturn_t linflex_rxint(int irq, void *dev_id)
238 {
239 	struct uart_port *sport = dev_id;
240 	unsigned int flg;
241 	struct tty_port *port = &sport->state->port;
242 	unsigned long flags, status;
243 	unsigned char rx;
244 	bool brk;
245 
246 	spin_lock_irqsave(&sport->lock, flags);
247 
248 	status = readl(sport->membase + UARTSR);
249 	while (status & LINFLEXD_UARTSR_RMB) {
250 		rx = readb(sport->membase + BDRM);
251 		brk = false;
252 		flg = TTY_NORMAL;
253 		sport->icount.rx++;
254 
255 		if (status & (LINFLEXD_UARTSR_BOF | LINFLEXD_UARTSR_FEF |
256 				LINFLEXD_UARTSR_PE)) {
257 			if (status & LINFLEXD_UARTSR_BOF)
258 				sport->icount.overrun++;
259 			if (status & LINFLEXD_UARTSR_FEF) {
260 				if (!rx) {
261 					brk = true;
262 					sport->icount.brk++;
263 				} else
264 					sport->icount.frame++;
265 			}
266 			if (status & LINFLEXD_UARTSR_PE)
267 				sport->icount.parity++;
268 		}
269 
270 		writel(status, sport->membase + UARTSR);
271 		status = readl(sport->membase + UARTSR);
272 
273 		if (brk) {
274 			uart_handle_break(sport);
275 		} else {
276 			if (uart_handle_sysrq_char(sport, (unsigned char)rx))
277 				continue;
278 			tty_insert_flip_char(port, rx, flg);
279 		}
280 	}
281 
282 	spin_unlock_irqrestore(&sport->lock, flags);
283 
284 	tty_flip_buffer_push(port);
285 
286 	return IRQ_HANDLED;
287 }
288 
289 static irqreturn_t linflex_int(int irq, void *dev_id)
290 {
291 	struct uart_port *sport = dev_id;
292 	unsigned long status;
293 
294 	status = readl(sport->membase + UARTSR);
295 
296 	if (status & LINFLEXD_UARTSR_DRFRFE)
297 		linflex_rxint(irq, dev_id);
298 	if (status & LINFLEXD_UARTSR_DTFTFF)
299 		linflex_txint(irq, dev_id);
300 
301 	return IRQ_HANDLED;
302 }
303 
304 /* return TIOCSER_TEMT when transmitter is not busy */
305 static unsigned int linflex_tx_empty(struct uart_port *port)
306 {
307 	unsigned long status;
308 
309 	status = readl(port->membase + UARTSR) & LINFLEXD_UARTSR_DTFTFF;
310 
311 	return status ? TIOCSER_TEMT : 0;
312 }
313 
314 static unsigned int linflex_get_mctrl(struct uart_port *port)
315 {
316 	return 0;
317 }
318 
319 static void linflex_set_mctrl(struct uart_port *port, unsigned int mctrl)
320 {
321 }
322 
323 static void linflex_break_ctl(struct uart_port *port, int break_state)
324 {
325 }
326 
327 static void linflex_setup_watermark(struct uart_port *sport)
328 {
329 	unsigned long cr, ier, cr1;
330 
331 	/* Disable transmission/reception */
332 	ier = readl(sport->membase + LINIER);
333 	ier &= ~(LINFLEXD_LINIER_DRIE | LINFLEXD_LINIER_DTIE);
334 	writel(ier, sport->membase + LINIER);
335 
336 	cr = readl(sport->membase + UARTCR);
337 	cr &= ~(LINFLEXD_UARTCR_RXEN | LINFLEXD_UARTCR_TXEN);
338 	writel(cr, sport->membase + UARTCR);
339 
340 	/* Enter initialization mode by setting INIT bit */
341 
342 	/* set the Linflex in master mode and activate by-pass filter */
343 	cr1 = LINFLEXD_LINCR1_BF | LINFLEXD_LINCR1_MME
344 	      | LINFLEXD_LINCR1_INIT;
345 	writel(cr1, sport->membase + LINCR1);
346 
347 	/* wait for init mode entry */
348 	while ((readl(sport->membase + LINSR)
349 		& LINFLEXD_LINSR_LINS_MASK)
350 		!= LINFLEXD_LINSR_LINS_INITMODE)
351 		;
352 
353 	/*
354 	 *	UART = 0x1;		- Linflex working in UART mode
355 	 *	TXEN = 0x1;		- Enable transmission of data now
356 	 *	RXEn = 0x1;		- Receiver enabled
357 	 *	WL0 = 0x1;		- 8 bit data
358 	 *	PCE = 0x0;		- No parity
359 	 */
360 
361 	/* set UART bit to allow writing other bits */
362 	writel(LINFLEXD_UARTCR_UART, sport->membase + UARTCR);
363 
364 	cr = (LINFLEXD_UARTCR_RXEN | LINFLEXD_UARTCR_TXEN |
365 	      LINFLEXD_UARTCR_WL0 | LINFLEXD_UARTCR_UART);
366 
367 	writel(cr, sport->membase + UARTCR);
368 
369 	cr1 &= ~(LINFLEXD_LINCR1_INIT);
370 
371 	writel(cr1, sport->membase + LINCR1);
372 
373 	ier = readl(sport->membase + LINIER);
374 	ier |= LINFLEXD_LINIER_DRIE;
375 	ier |= LINFLEXD_LINIER_DTIE;
376 
377 	writel(ier, sport->membase + LINIER);
378 }
379 
380 static int linflex_startup(struct uart_port *port)
381 {
382 	int ret = 0;
383 	unsigned long flags;
384 
385 	spin_lock_irqsave(&port->lock, flags);
386 
387 	linflex_setup_watermark(port);
388 
389 	spin_unlock_irqrestore(&port->lock, flags);
390 
391 	ret = devm_request_irq(port->dev, port->irq, linflex_int, 0,
392 			       DRIVER_NAME, port);
393 
394 	return ret;
395 }
396 
397 static void linflex_shutdown(struct uart_port *port)
398 {
399 	unsigned long ier;
400 	unsigned long flags;
401 
402 	spin_lock_irqsave(&port->lock, flags);
403 
404 	/* disable interrupts */
405 	ier = readl(port->membase + LINIER);
406 	ier &= ~(LINFLEXD_LINIER_DRIE | LINFLEXD_LINIER_DTIE);
407 	writel(ier, port->membase + LINIER);
408 
409 	spin_unlock_irqrestore(&port->lock, flags);
410 
411 	devm_free_irq(port->dev, port->irq, port);
412 }
413 
414 static void
415 linflex_set_termios(struct uart_port *port, struct ktermios *termios,
416 		    struct ktermios *old)
417 {
418 	unsigned long flags;
419 	unsigned long cr, old_cr, cr1;
420 	unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
421 
422 	cr = readl(port->membase + UARTCR);
423 	old_cr = cr;
424 
425 	/* Enter initialization mode by setting INIT bit */
426 	cr1 = readl(port->membase + LINCR1);
427 	cr1 |= LINFLEXD_LINCR1_INIT;
428 	writel(cr1, port->membase + LINCR1);
429 
430 	/* wait for init mode entry */
431 	while ((readl(port->membase + LINSR)
432 		& LINFLEXD_LINSR_LINS_MASK)
433 		!= LINFLEXD_LINSR_LINS_INITMODE)
434 		;
435 
436 	/*
437 	 * only support CS8 and CS7, and for CS7 must enable PE.
438 	 * supported mode:
439 	 *	- (7,e/o,1)
440 	 *	- (8,n,1)
441 	 *	- (8,e/o,1)
442 	 */
443 	/* enter the UART into configuration mode */
444 
445 	while ((termios->c_cflag & CSIZE) != CS8 &&
446 	       (termios->c_cflag & CSIZE) != CS7) {
447 		termios->c_cflag &= ~CSIZE;
448 		termios->c_cflag |= old_csize;
449 		old_csize = CS8;
450 	}
451 
452 	if ((termios->c_cflag & CSIZE) == CS7) {
453 		/* Word length: WL1WL0:00 */
454 		cr = old_cr & ~LINFLEXD_UARTCR_WL1 & ~LINFLEXD_UARTCR_WL0;
455 	}
456 
457 	if ((termios->c_cflag & CSIZE) == CS8) {
458 		/* Word length: WL1WL0:01 */
459 		cr = (old_cr | LINFLEXD_UARTCR_WL0) & ~LINFLEXD_UARTCR_WL1;
460 	}
461 
462 	if (termios->c_cflag & CMSPAR) {
463 		if ((termios->c_cflag & CSIZE) != CS8) {
464 			termios->c_cflag &= ~CSIZE;
465 			termios->c_cflag |= CS8;
466 		}
467 		/* has a space/sticky bit */
468 		cr |= LINFLEXD_UARTCR_WL0;
469 	}
470 
471 	if (termios->c_cflag & CSTOPB)
472 		termios->c_cflag &= ~CSTOPB;
473 
474 	/* parity must be enabled when CS7 to match 8-bits format */
475 	if ((termios->c_cflag & CSIZE) == CS7)
476 		termios->c_cflag |= PARENB;
477 
478 	if ((termios->c_cflag & PARENB)) {
479 		cr |= LINFLEXD_UARTCR_PCE;
480 		if (termios->c_cflag & PARODD)
481 			cr = (cr | LINFLEXD_UARTCR_PC0) &
482 			     (~LINFLEXD_UARTCR_PC1);
483 		else
484 			cr = cr & (~LINFLEXD_UARTCR_PC1 &
485 				   ~LINFLEXD_UARTCR_PC0);
486 	} else {
487 		cr &= ~LINFLEXD_UARTCR_PCE;
488 	}
489 
490 	spin_lock_irqsave(&port->lock, flags);
491 
492 	port->read_status_mask = 0;
493 
494 	if (termios->c_iflag & INPCK)
495 		port->read_status_mask |=	(LINFLEXD_UARTSR_FEF |
496 						 LINFLEXD_UARTSR_PE0 |
497 						 LINFLEXD_UARTSR_PE1 |
498 						 LINFLEXD_UARTSR_PE2 |
499 						 LINFLEXD_UARTSR_PE3);
500 	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
501 		port->read_status_mask |= LINFLEXD_UARTSR_FEF;
502 
503 	/* characters to ignore */
504 	port->ignore_status_mask = 0;
505 	if (termios->c_iflag & IGNPAR)
506 		port->ignore_status_mask |= LINFLEXD_UARTSR_PE;
507 	if (termios->c_iflag & IGNBRK) {
508 		port->ignore_status_mask |= LINFLEXD_UARTSR_PE;
509 		/*
510 		 * if we're ignoring parity and break indicators,
511 		 * ignore overruns too (for real raw support).
512 		 */
513 		if (termios->c_iflag & IGNPAR)
514 			port->ignore_status_mask |= LINFLEXD_UARTSR_BOF;
515 	}
516 
517 	writel(cr, port->membase + UARTCR);
518 
519 	cr1 &= ~(LINFLEXD_LINCR1_INIT);
520 
521 	writel(cr1, port->membase + LINCR1);
522 
523 	spin_unlock_irqrestore(&port->lock, flags);
524 }
525 
526 static const char *linflex_type(struct uart_port *port)
527 {
528 	return "FSL_LINFLEX";
529 }
530 
531 static void linflex_release_port(struct uart_port *port)
532 {
533 	/* nothing to do */
534 }
535 
536 static int linflex_request_port(struct uart_port *port)
537 {
538 	return 0;
539 }
540 
541 /* configure/auto-configure the port */
542 static void linflex_config_port(struct uart_port *port, int flags)
543 {
544 	if (flags & UART_CONFIG_TYPE)
545 		port->type = PORT_LINFLEXUART;
546 }
547 
548 static const struct uart_ops linflex_pops = {
549 	.tx_empty	= linflex_tx_empty,
550 	.set_mctrl	= linflex_set_mctrl,
551 	.get_mctrl	= linflex_get_mctrl,
552 	.stop_tx	= linflex_stop_tx,
553 	.start_tx	= linflex_start_tx,
554 	.stop_rx	= linflex_stop_rx,
555 	.break_ctl	= linflex_break_ctl,
556 	.startup	= linflex_startup,
557 	.shutdown	= linflex_shutdown,
558 	.set_termios	= linflex_set_termios,
559 	.type		= linflex_type,
560 	.request_port	= linflex_request_port,
561 	.release_port	= linflex_release_port,
562 	.config_port	= linflex_config_port,
563 };
564 
565 static struct uart_port *linflex_ports[UART_NR];
566 
567 #ifdef CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE
568 static void linflex_console_putchar(struct uart_port *port, int ch)
569 {
570 	unsigned long cr;
571 
572 	cr = readl(port->membase + UARTCR);
573 
574 	writeb(ch, port->membase + BDRL);
575 
576 	if (!(cr & LINFLEXD_UARTCR_TFBM))
577 		while ((readl(port->membase + UARTSR) &
578 					LINFLEXD_UARTSR_DTFTFF)
579 				!= LINFLEXD_UARTSR_DTFTFF)
580 			;
581 	else
582 		while (readl(port->membase + UARTSR) &
583 					LINFLEXD_UARTSR_DTFTFF)
584 			;
585 
586 	if (!(cr & LINFLEXD_UARTCR_TFBM)) {
587 		writel((readl(port->membase + UARTSR) |
588 					LINFLEXD_UARTSR_DTFTFF),
589 					port->membase + UARTSR);
590 	}
591 }
592 
593 static void linflex_earlycon_putchar(struct uart_port *port, int ch)
594 {
595 	unsigned long flags;
596 	char *ret;
597 
598 	if (!linflex_earlycon_same_instance) {
599 		linflex_console_putchar(port, ch);
600 		return;
601 	}
602 
603 	spin_lock_irqsave(&init_lock, flags);
604 	if (!during_init)
605 		goto outside_init;
606 
607 	if (earlycon_buf.len >= 1 << CONFIG_LOG_BUF_SHIFT)
608 		goto init_release;
609 
610 	if (!earlycon_buf.cap) {
611 		earlycon_buf.content = kmalloc(EARLYCON_BUFFER_INITIAL_CAP,
612 					       GFP_ATOMIC);
613 		earlycon_buf.cap = earlycon_buf.content ?
614 				   EARLYCON_BUFFER_INITIAL_CAP : 0;
615 	} else if (earlycon_buf.len == earlycon_buf.cap) {
616 		ret = krealloc(earlycon_buf.content, earlycon_buf.cap << 1,
617 			       GFP_ATOMIC);
618 		if (ret) {
619 			earlycon_buf.content = ret;
620 			earlycon_buf.cap <<= 1;
621 		}
622 	}
623 
624 	if (earlycon_buf.len < earlycon_buf.cap)
625 		earlycon_buf.content[earlycon_buf.len++] = ch;
626 
627 	goto init_release;
628 
629 outside_init:
630 	linflex_console_putchar(port, ch);
631 init_release:
632 	spin_unlock_irqrestore(&init_lock, flags);
633 }
634 
635 static void linflex_string_write(struct uart_port *sport, const char *s,
636 				 unsigned int count)
637 {
638 	unsigned long cr, ier = 0;
639 
640 	ier = readl(sport->membase + LINIER);
641 	linflex_stop_tx(sport);
642 
643 	cr = readl(sport->membase + UARTCR);
644 	cr |= (LINFLEXD_UARTCR_TXEN);
645 	writel(cr, sport->membase + UARTCR);
646 
647 	uart_console_write(sport, s, count, linflex_console_putchar);
648 
649 	writel(ier, sport->membase + LINIER);
650 }
651 
652 static void
653 linflex_console_write(struct console *co, const char *s, unsigned int count)
654 {
655 	struct uart_port *sport = linflex_ports[co->index];
656 	unsigned long flags;
657 	int locked = 1;
658 
659 	if (sport->sysrq)
660 		locked = 0;
661 	else if (oops_in_progress)
662 		locked = spin_trylock_irqsave(&sport->lock, flags);
663 	else
664 		spin_lock_irqsave(&sport->lock, flags);
665 
666 	linflex_string_write(sport, s, count);
667 
668 	if (locked)
669 		spin_unlock_irqrestore(&sport->lock, flags);
670 }
671 
672 /*
673  * if the port was already initialised (eg, by a boot loader),
674  * try to determine the current setup.
675  */
676 static void __init
677 linflex_console_get_options(struct uart_port *sport, int *parity, int *bits)
678 {
679 	unsigned long cr;
680 
681 	cr = readl(sport->membase + UARTCR);
682 	cr &= LINFLEXD_UARTCR_RXEN | LINFLEXD_UARTCR_TXEN;
683 
684 	if (!cr)
685 		return;
686 
687 	/* ok, the port was enabled */
688 
689 	*parity = 'n';
690 	if (cr & LINFLEXD_UARTCR_PCE) {
691 		if (cr & LINFLEXD_UARTCR_PC0)
692 			*parity = 'o';
693 		else
694 			*parity = 'e';
695 	}
696 
697 	if ((cr & LINFLEXD_UARTCR_WL0) && ((cr & LINFLEXD_UARTCR_WL1) == 0)) {
698 		if (cr & LINFLEXD_UARTCR_PCE)
699 			*bits = 9;
700 		else
701 			*bits = 8;
702 	}
703 }
704 
705 static int __init linflex_console_setup(struct console *co, char *options)
706 {
707 	struct uart_port *sport;
708 	int baud = 115200;
709 	int bits = 8;
710 	int parity = 'n';
711 	int flow = 'n';
712 	int ret;
713 	int i;
714 	unsigned long flags;
715 	/*
716 	 * check whether an invalid uart number has been specified, and
717 	 * if so, search for the first available port that does have
718 	 * console support.
719 	 */
720 	if (co->index == -1 || co->index >= ARRAY_SIZE(linflex_ports))
721 		co->index = 0;
722 
723 	sport = linflex_ports[co->index];
724 	if (!sport)
725 		return -ENODEV;
726 
727 	if (options)
728 		uart_parse_options(options, &baud, &parity, &bits, &flow);
729 	else
730 		linflex_console_get_options(sport, &parity, &bits);
731 
732 	if (earlycon_port && sport->mapbase == earlycon_port->mapbase) {
733 		linflex_earlycon_same_instance = true;
734 
735 		spin_lock_irqsave(&init_lock, flags);
736 		during_init = true;
737 		spin_unlock_irqrestore(&init_lock, flags);
738 
739 		/* Workaround for character loss or output of many invalid
740 		 * characters, when INIT mode is entered shortly after a
741 		 * character has just been printed.
742 		 */
743 		udelay(PREINIT_DELAY);
744 	}
745 
746 	linflex_setup_watermark(sport);
747 
748 	ret = uart_set_options(sport, co, baud, parity, bits, flow);
749 
750 	if (!linflex_earlycon_same_instance)
751 		goto done;
752 
753 	spin_lock_irqsave(&init_lock, flags);
754 
755 	/* Emptying buffer */
756 	if (earlycon_buf.len) {
757 		for (i = 0; i < earlycon_buf.len; i++)
758 			linflex_console_putchar(earlycon_port,
759 				earlycon_buf.content[i]);
760 
761 		kfree(earlycon_buf.content);
762 		earlycon_buf.len = 0;
763 	}
764 
765 	during_init = false;
766 	spin_unlock_irqrestore(&init_lock, flags);
767 
768 done:
769 	return ret;
770 }
771 
772 static struct uart_driver linflex_reg;
773 static struct console linflex_console = {
774 	.name		= DEV_NAME,
775 	.write		= linflex_console_write,
776 	.device		= uart_console_device,
777 	.setup		= linflex_console_setup,
778 	.flags		= CON_PRINTBUFFER,
779 	.index		= -1,
780 	.data		= &linflex_reg,
781 };
782 
783 static void linflex_earlycon_write(struct console *con, const char *s,
784 				   unsigned int n)
785 {
786 	struct earlycon_device *dev = con->data;
787 
788 	uart_console_write(&dev->port, s, n, linflex_earlycon_putchar);
789 }
790 
791 static int __init linflex_early_console_setup(struct earlycon_device *device,
792 					      const char *options)
793 {
794 	if (!device->port.membase)
795 		return -ENODEV;
796 
797 	device->con->write = linflex_earlycon_write;
798 	earlycon_port = &device->port;
799 
800 	return 0;
801 }
802 
803 OF_EARLYCON_DECLARE(linflex, "fsl,s32v234-linflexuart",
804 		    linflex_early_console_setup);
805 
806 #define LINFLEX_CONSOLE	(&linflex_console)
807 #else
808 #define LINFLEX_CONSOLE	NULL
809 #endif
810 
811 static struct uart_driver linflex_reg = {
812 	.owner		= THIS_MODULE,
813 	.driver_name	= DRIVER_NAME,
814 	.dev_name	= DEV_NAME,
815 	.nr		= ARRAY_SIZE(linflex_ports),
816 	.cons		= LINFLEX_CONSOLE,
817 };
818 
819 static int linflex_probe(struct platform_device *pdev)
820 {
821 	struct device_node *np = pdev->dev.of_node;
822 	struct uart_port *sport;
823 	struct resource *res;
824 	int ret;
825 
826 	sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL);
827 	if (!sport)
828 		return -ENOMEM;
829 
830 	ret = of_alias_get_id(np, "serial");
831 	if (ret < 0) {
832 		dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
833 		return ret;
834 	}
835 	if (ret >= UART_NR) {
836 		dev_err(&pdev->dev, "driver limited to %d serial ports\n",
837 			UART_NR);
838 		return -ENOMEM;
839 	}
840 
841 	sport->line = ret;
842 
843 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
844 	if (!res)
845 		return -ENODEV;
846 
847 	sport->mapbase = res->start;
848 	sport->membase = devm_ioremap_resource(&pdev->dev, res);
849 	if (IS_ERR(sport->membase))
850 		return PTR_ERR(sport->membase);
851 
852 	sport->dev = &pdev->dev;
853 	sport->type = PORT_LINFLEXUART;
854 	sport->iotype = UPIO_MEM;
855 	sport->irq = platform_get_irq(pdev, 0);
856 	sport->ops = &linflex_pops;
857 	sport->flags = UPF_BOOT_AUTOCONF;
858 	sport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE);
859 
860 	linflex_ports[sport->line] = sport;
861 
862 	platform_set_drvdata(pdev, sport);
863 
864 	ret = uart_add_one_port(&linflex_reg, sport);
865 	if (ret)
866 		return ret;
867 
868 	return 0;
869 }
870 
871 static int linflex_remove(struct platform_device *pdev)
872 {
873 	struct uart_port *sport = platform_get_drvdata(pdev);
874 
875 	uart_remove_one_port(&linflex_reg, sport);
876 
877 	return 0;
878 }
879 
880 #ifdef CONFIG_PM_SLEEP
881 static int linflex_suspend(struct device *dev)
882 {
883 	struct uart_port *sport = dev_get_drvdata(dev);
884 
885 	uart_suspend_port(&linflex_reg, sport);
886 
887 	return 0;
888 }
889 
890 static int linflex_resume(struct device *dev)
891 {
892 	struct uart_port *sport = dev_get_drvdata(dev);
893 
894 	uart_resume_port(&linflex_reg, sport);
895 
896 	return 0;
897 }
898 #endif
899 
900 static SIMPLE_DEV_PM_OPS(linflex_pm_ops, linflex_suspend, linflex_resume);
901 
902 static struct platform_driver linflex_driver = {
903 	.probe		= linflex_probe,
904 	.remove		= linflex_remove,
905 	.driver		= {
906 		.name	= DRIVER_NAME,
907 		.of_match_table	= linflex_dt_ids,
908 		.pm	= &linflex_pm_ops,
909 	},
910 };
911 
912 static int __init linflex_serial_init(void)
913 {
914 	int ret;
915 
916 	ret = uart_register_driver(&linflex_reg);
917 	if (ret)
918 		return ret;
919 
920 	ret = platform_driver_register(&linflex_driver);
921 	if (ret)
922 		uart_unregister_driver(&linflex_reg);
923 
924 	return ret;
925 }
926 
927 static void __exit linflex_serial_exit(void)
928 {
929 	platform_driver_unregister(&linflex_driver);
930 	uart_unregister_driver(&linflex_reg);
931 }
932 
933 module_init(linflex_serial_init);
934 module_exit(linflex_serial_exit);
935 
936 MODULE_DESCRIPTION("Freescale LINFlexD serial port driver");
937 MODULE_LICENSE("GPL v2");
938