xref: /openbmc/linux/drivers/tty/serial/earlycon.c (revision b9b77222)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2014 Linaro Ltd.
4  * Author: Rob Herring <robh@kernel.org>
5  *
6  * Based on 8250 earlycon:
7  * (c) Copyright 2004 Hewlett-Packard Development Company, L.P.
8  *	Bjorn Helgaas <bjorn.helgaas@hp.com>
9  */
10 
11 #define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
12 
13 #include <linux/console.h>
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/io.h>
17 #include <linux/serial_core.h>
18 #include <linux/sizes.h>
19 #include <linux/of.h>
20 #include <linux/of_fdt.h>
21 #include <linux/acpi.h>
22 
23 #ifdef CONFIG_FIX_EARLYCON_MEM
24 #include <asm/fixmap.h>
25 #endif
26 
27 #include <asm/serial.h>
28 
29 static struct console early_con = {
30 	.name =		"uart",		/* fixed up at earlycon registration */
31 	.flags =	CON_PRINTBUFFER | CON_BOOT,
32 	.index =	0,
33 };
34 
35 static struct earlycon_device early_console_dev = {
36 	.con = &early_con,
37 };
38 
39 static void __iomem * __init earlycon_map(resource_size_t paddr, size_t size)
40 {
41 	void __iomem *base;
42 #ifdef CONFIG_FIX_EARLYCON_MEM
43 	set_fixmap_io(FIX_EARLYCON_MEM_BASE, paddr & PAGE_MASK);
44 	base = (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
45 	base += paddr & ~PAGE_MASK;
46 #else
47 	base = ioremap(paddr, size);
48 #endif
49 	if (!base)
50 		pr_err("%s: Couldn't map %pa\n", __func__, &paddr);
51 
52 	return base;
53 }
54 
55 static void __init earlycon_init(struct earlycon_device *device,
56 				 const char *name)
57 {
58 	struct console *earlycon = device->con;
59 	struct uart_port *port = &device->port;
60 	const char *s;
61 	size_t len;
62 
63 	/* scan backwards from end of string for first non-numeral */
64 	for (s = name + strlen(name);
65 	     s > name && s[-1] >= '0' && s[-1] <= '9';
66 	     s--)
67 		;
68 	if (*s)
69 		earlycon->index = simple_strtoul(s, NULL, 10);
70 	len = s - name;
71 	strlcpy(earlycon->name, name, min(len + 1, sizeof(earlycon->name)));
72 	earlycon->data = &early_console_dev;
73 
74 	if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM16 ||
75 	    port->iotype == UPIO_MEM32 || port->iotype == UPIO_MEM32BE)
76 		pr_info("%s%d at MMIO%s %pa (options '%s')\n",
77 			earlycon->name, earlycon->index,
78 			(port->iotype == UPIO_MEM) ? "" :
79 			(port->iotype == UPIO_MEM16) ? "16" :
80 			(port->iotype == UPIO_MEM32) ? "32" : "32be",
81 			&port->mapbase, device->options);
82 	else
83 		pr_info("%s%d at I/O port 0x%lx (options '%s')\n",
84 			earlycon->name, earlycon->index,
85 			port->iobase, device->options);
86 }
87 
88 static int __init parse_options(struct earlycon_device *device, char *options)
89 {
90 	struct uart_port *port = &device->port;
91 	int length;
92 	resource_size_t addr;
93 
94 	if (uart_parse_earlycon(options, &port->iotype, &addr, &options))
95 		return -EINVAL;
96 
97 	switch (port->iotype) {
98 	case UPIO_MEM:
99 		port->mapbase = addr;
100 		break;
101 	case UPIO_MEM16:
102 		port->regshift = 1;
103 		port->mapbase = addr;
104 		break;
105 	case UPIO_MEM32:
106 	case UPIO_MEM32BE:
107 		port->regshift = 2;
108 		port->mapbase = addr;
109 		break;
110 	case UPIO_PORT:
111 		port->iobase = addr;
112 		break;
113 	default:
114 		return -EINVAL;
115 	}
116 
117 	if (options) {
118 		device->baud = simple_strtoul(options, NULL, 0);
119 		length = min(strcspn(options, " ") + 1,
120 			     (size_t)(sizeof(device->options)));
121 		strlcpy(device->options, options, length);
122 	}
123 
124 	return 0;
125 }
126 
127 static int __init register_earlycon(char *buf, const struct earlycon_id *match)
128 {
129 	int err;
130 	struct uart_port *port = &early_console_dev.port;
131 
132 	/* On parsing error, pass the options buf to the setup function */
133 	if (buf && !parse_options(&early_console_dev, buf))
134 		buf = NULL;
135 
136 	spin_lock_init(&port->lock);
137 	port->uartclk = BASE_BAUD * 16;
138 	if (port->mapbase)
139 		port->membase = earlycon_map(port->mapbase, 64);
140 
141 	earlycon_init(&early_console_dev, match->name);
142 	err = match->setup(&early_console_dev, buf);
143 	if (err < 0)
144 		return err;
145 	if (!early_console_dev.con->write)
146 		return -ENODEV;
147 
148 	register_console(early_console_dev.con);
149 	return 0;
150 }
151 
152 /**
153  *	setup_earlycon - match and register earlycon console
154  *	@buf:	earlycon param string
155  *
156  *	Registers the earlycon console matching the earlycon specified
157  *	in the param string @buf. Acceptable param strings are of the form
158  *	   <name>,io|mmio|mmio32|mmio32be,<addr>,<options>
159  *	   <name>,0x<addr>,<options>
160  *	   <name>,<options>
161  *	   <name>
162  *
163  *	Only for the third form does the earlycon setup() method receive the
164  *	<options> string in the 'options' parameter; all other forms set
165  *	the parameter to NULL.
166  *
167  *	Returns 0 if an attempt to register the earlycon was made,
168  *	otherwise negative error code
169  */
170 int __init setup_earlycon(char *buf)
171 {
172 	const struct earlycon_id **p_match;
173 
174 	if (!buf || !buf[0])
175 		return -EINVAL;
176 
177 	if (early_con.flags & CON_ENABLED)
178 		return -EALREADY;
179 
180 	for (p_match = __earlycon_table; p_match < __earlycon_table_end;
181 	     p_match++) {
182 		const struct earlycon_id *match = *p_match;
183 		size_t len = strlen(match->name);
184 
185 		if (strncmp(buf, match->name, len))
186 			continue;
187 
188 		if (buf[len]) {
189 			if (buf[len] != ',')
190 				continue;
191 			buf += len + 1;
192 		} else
193 			buf = NULL;
194 
195 		return register_earlycon(buf, match);
196 	}
197 
198 	return -ENOENT;
199 }
200 
201 /*
202  * This defers the initialization of the early console until after ACPI has
203  * been initialized.
204  */
205 bool earlycon_acpi_spcr_enable __initdata;
206 
207 /* early_param wrapper for setup_earlycon() */
208 static int __init param_setup_earlycon(char *buf)
209 {
210 	int err;
211 
212 	/* Just 'earlycon' is a valid param for devicetree and ACPI SPCR. */
213 	if (!buf || !buf[0]) {
214 		if (IS_ENABLED(CONFIG_ACPI_SPCR_TABLE)) {
215 			earlycon_acpi_spcr_enable = true;
216 			return 0;
217 		} else if (!buf) {
218 			return early_init_dt_scan_chosen_stdout();
219 		}
220 	}
221 
222 	err = setup_earlycon(buf);
223 	if (err == -ENOENT || err == -EALREADY)
224 		return 0;
225 	return err;
226 }
227 early_param("earlycon", param_setup_earlycon);
228 
229 #ifdef CONFIG_OF_EARLY_FLATTREE
230 
231 int __init of_setup_earlycon(const struct earlycon_id *match,
232 			     unsigned long node,
233 			     const char *options)
234 {
235 	int err;
236 	struct uart_port *port = &early_console_dev.port;
237 	const __be32 *val;
238 	bool big_endian;
239 	u64 addr;
240 
241 	spin_lock_init(&port->lock);
242 	port->iotype = UPIO_MEM;
243 	addr = of_flat_dt_translate_address(node);
244 	if (addr == OF_BAD_ADDR) {
245 		pr_warn("[%s] bad address\n", match->name);
246 		return -ENXIO;
247 	}
248 	port->mapbase = addr;
249 
250 	val = of_get_flat_dt_prop(node, "reg-offset", NULL);
251 	if (val)
252 		port->mapbase += be32_to_cpu(*val);
253 	port->membase = earlycon_map(port->mapbase, SZ_4K);
254 
255 	val = of_get_flat_dt_prop(node, "reg-shift", NULL);
256 	if (val)
257 		port->regshift = be32_to_cpu(*val);
258 	big_endian = of_get_flat_dt_prop(node, "big-endian", NULL) != NULL ||
259 		(IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) &&
260 		 of_get_flat_dt_prop(node, "native-endian", NULL) != NULL);
261 	val = of_get_flat_dt_prop(node, "reg-io-width", NULL);
262 	if (val) {
263 		switch (be32_to_cpu(*val)) {
264 		case 1:
265 			port->iotype = UPIO_MEM;
266 			break;
267 		case 2:
268 			port->iotype = UPIO_MEM16;
269 			break;
270 		case 4:
271 			port->iotype = (big_endian) ? UPIO_MEM32BE : UPIO_MEM32;
272 			break;
273 		default:
274 			pr_warn("[%s] unsupported reg-io-width\n", match->name);
275 			return -EINVAL;
276 		}
277 	}
278 
279 	val = of_get_flat_dt_prop(node, "current-speed", NULL);
280 	if (val)
281 		early_console_dev.baud = be32_to_cpu(*val);
282 
283 	val = of_get_flat_dt_prop(node, "clock-frequency", NULL);
284 	if (val)
285 		port->uartclk = be32_to_cpu(*val);
286 
287 	if (options) {
288 		early_console_dev.baud = simple_strtoul(options, NULL, 0);
289 		strlcpy(early_console_dev.options, options,
290 			sizeof(early_console_dev.options));
291 	}
292 	earlycon_init(&early_console_dev, match->name);
293 	err = match->setup(&early_console_dev, options);
294 	if (err < 0)
295 		return err;
296 	if (!early_console_dev.con->write)
297 		return -ENODEV;
298 
299 
300 	register_console(early_console_dev.con);
301 	return 0;
302 }
303 
304 #endif /* CONFIG_OF_EARLY_FLATTREE */
305