1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * dz.c: Serial port driver for DECstations equipped 4 * with the DZ chipset. 5 * 6 * Copyright (C) 1998 Olivier A. D. Lebaillif 7 * 8 * Email: olivier.lebaillif@ifrsys.com 9 * 10 * Copyright (C) 2004, 2006, 2007 Maciej W. Rozycki 11 * 12 * [31-AUG-98] triemer 13 * Changed IRQ to use Harald's dec internals interrupts.h 14 * removed base_addr code - moving address assignment to setup.c 15 * Changed name of dz_init to rs_init to be consistent with tc code 16 * [13-NOV-98] triemer fixed code to receive characters 17 * after patches by harald to irq code. 18 * [09-JAN-99] triemer minor fix for schedule - due to removal of timeout 19 * field from "current" - somewhere between 2.1.121 and 2.1.131 20 Qua Jun 27 15:02:26 BRT 2001 21 * [27-JUN-2001] Arnaldo Carvalho de Melo <acme@conectiva.com.br> - cleanups 22 * 23 * Parts (C) 1999 David Airlie, airlied@linux.ie 24 * [07-SEP-99] Bugfixes 25 * 26 * [06-Jan-2002] Russell King <rmk@arm.linux.org.uk> 27 * Converted to new serial core 28 */ 29 30 #undef DEBUG_DZ 31 32 #include <linux/bitops.h> 33 #include <linux/compiler.h> 34 #include <linux/console.h> 35 #include <linux/delay.h> 36 #include <linux/errno.h> 37 #include <linux/init.h> 38 #include <linux/interrupt.h> 39 #include <linux/ioport.h> 40 #include <linux/kernel.h> 41 #include <linux/major.h> 42 #include <linux/module.h> 43 #include <linux/serial.h> 44 #include <linux/serial_core.h> 45 #include <linux/sysrq.h> 46 #include <linux/tty.h> 47 #include <linux/tty_flip.h> 48 49 #include <linux/atomic.h> 50 #include <linux/io.h> 51 #include <asm/bootinfo.h> 52 53 #include <asm/dec/interrupts.h> 54 #include <asm/dec/kn01.h> 55 #include <asm/dec/kn02.h> 56 #include <asm/dec/machtype.h> 57 #include <asm/dec/prom.h> 58 #include <asm/dec/system.h> 59 60 #include "dz.h" 61 62 63 MODULE_DESCRIPTION("DECstation DZ serial driver"); 64 MODULE_LICENSE("GPL"); 65 66 67 static char dz_name[] __initdata = "DECstation DZ serial driver version "; 68 static char dz_version[] __initdata = "1.04"; 69 70 struct dz_port { 71 struct dz_mux *mux; 72 struct uart_port port; 73 unsigned int cflag; 74 }; 75 76 struct dz_mux { 77 struct dz_port dport[DZ_NB_PORT]; 78 atomic_t map_guard; 79 atomic_t irq_guard; 80 int initialised; 81 }; 82 83 static struct dz_mux dz_mux; 84 85 static inline struct dz_port *to_dport(struct uart_port *uport) 86 { 87 return container_of(uport, struct dz_port, port); 88 } 89 90 /* 91 * ------------------------------------------------------------ 92 * dz_in () and dz_out () 93 * 94 * These routines are used to access the registers of the DZ 95 * chip, hiding relocation differences between implementation. 96 * ------------------------------------------------------------ 97 */ 98 99 static u16 dz_in(struct dz_port *dport, unsigned offset) 100 { 101 void __iomem *addr = dport->port.membase + offset; 102 103 return readw(addr); 104 } 105 106 static void dz_out(struct dz_port *dport, unsigned offset, u16 value) 107 { 108 void __iomem *addr = dport->port.membase + offset; 109 110 writew(value, addr); 111 } 112 113 /* 114 * ------------------------------------------------------------ 115 * rs_stop () and rs_start () 116 * 117 * These routines are called before setting or resetting 118 * tty->flow.stopped. They enable or disable transmitter interrupts, 119 * as necessary. 120 * ------------------------------------------------------------ 121 */ 122 123 static void dz_stop_tx(struct uart_port *uport) 124 { 125 struct dz_port *dport = to_dport(uport); 126 u16 tmp, mask = 1 << dport->port.line; 127 128 tmp = dz_in(dport, DZ_TCR); /* read the TX flag */ 129 tmp &= ~mask; /* clear the TX flag */ 130 dz_out(dport, DZ_TCR, tmp); 131 } 132 133 static void dz_start_tx(struct uart_port *uport) 134 { 135 struct dz_port *dport = to_dport(uport); 136 u16 tmp, mask = 1 << dport->port.line; 137 138 tmp = dz_in(dport, DZ_TCR); /* read the TX flag */ 139 tmp |= mask; /* set the TX flag */ 140 dz_out(dport, DZ_TCR, tmp); 141 } 142 143 static void dz_stop_rx(struct uart_port *uport) 144 { 145 struct dz_port *dport = to_dport(uport); 146 147 dport->cflag &= ~DZ_RXENAB; 148 dz_out(dport, DZ_LPR, dport->cflag); 149 } 150 151 /* 152 * ------------------------------------------------------------ 153 * 154 * Here start the interrupt handling routines. All of the following 155 * subroutines are declared as inline and are folded into 156 * dz_interrupt. They were separated out for readability's sake. 157 * 158 * Note: dz_interrupt() is a "fast" interrupt, which means that it 159 * runs with interrupts turned off. People who may want to modify 160 * dz_interrupt() should try to keep the interrupt handler as fast as 161 * possible. After you are done making modifications, it is not a bad 162 * idea to do: 163 * 164 * make drivers/serial/dz.s 165 * 166 * and look at the resulting assemble code in dz.s. 167 * 168 * ------------------------------------------------------------ 169 */ 170 171 /* 172 * ------------------------------------------------------------ 173 * receive_char () 174 * 175 * This routine deals with inputs from any lines. 176 * ------------------------------------------------------------ 177 */ 178 static inline void dz_receive_chars(struct dz_mux *mux) 179 { 180 struct uart_port *uport; 181 struct dz_port *dport = &mux->dport[0]; 182 struct uart_icount *icount; 183 int lines_rx[DZ_NB_PORT] = { [0 ... DZ_NB_PORT - 1] = 0 }; 184 u16 status; 185 u8 ch, flag; 186 int i; 187 188 while ((status = dz_in(dport, DZ_RBUF)) & DZ_DVAL) { 189 dport = &mux->dport[LINE(status)]; 190 uport = &dport->port; 191 192 ch = UCHAR(status); /* grab the char */ 193 flag = TTY_NORMAL; 194 195 icount = &uport->icount; 196 icount->rx++; 197 198 if (unlikely(status & (DZ_OERR | DZ_FERR | DZ_PERR))) { 199 200 /* 201 * There is no separate BREAK status bit, so treat 202 * null characters with framing errors as BREAKs; 203 * normally, otherwise. For this move the Framing 204 * Error bit to a simulated BREAK bit. 205 */ 206 if (!ch) { 207 status |= (status & DZ_FERR) >> 208 (ffs(DZ_FERR) - ffs(DZ_BREAK)); 209 status &= ~DZ_FERR; 210 } 211 212 /* Handle SysRq/SAK & keep track of the statistics. */ 213 if (status & DZ_BREAK) { 214 icount->brk++; 215 if (uart_handle_break(uport)) 216 continue; 217 } else if (status & DZ_FERR) 218 icount->frame++; 219 else if (status & DZ_PERR) 220 icount->parity++; 221 if (status & DZ_OERR) 222 icount->overrun++; 223 224 status &= uport->read_status_mask; 225 if (status & DZ_BREAK) 226 flag = TTY_BREAK; 227 else if (status & DZ_FERR) 228 flag = TTY_FRAME; 229 else if (status & DZ_PERR) 230 flag = TTY_PARITY; 231 232 } 233 234 if (uart_handle_sysrq_char(uport, ch)) 235 continue; 236 237 uart_insert_char(uport, status, DZ_OERR, ch, flag); 238 lines_rx[LINE(status)] = 1; 239 } 240 for (i = 0; i < DZ_NB_PORT; i++) 241 if (lines_rx[i]) 242 tty_flip_buffer_push(&mux->dport[i].port.state->port); 243 } 244 245 /* 246 * ------------------------------------------------------------ 247 * transmit_char () 248 * 249 * This routine deals with outputs to any lines. 250 * ------------------------------------------------------------ 251 */ 252 static inline void dz_transmit_chars(struct dz_mux *mux) 253 { 254 struct dz_port *dport = &mux->dport[0]; 255 struct circ_buf *xmit; 256 unsigned char tmp; 257 u16 status; 258 259 status = dz_in(dport, DZ_CSR); 260 dport = &mux->dport[LINE(status)]; 261 xmit = &dport->port.state->xmit; 262 263 if (dport->port.x_char) { /* XON/XOFF chars */ 264 dz_out(dport, DZ_TDR, dport->port.x_char); 265 dport->port.icount.tx++; 266 dport->port.x_char = 0; 267 return; 268 } 269 /* If nothing to do or stopped or hardware stopped. */ 270 if (uart_circ_empty(xmit) || uart_tx_stopped(&dport->port)) { 271 spin_lock(&dport->port.lock); 272 dz_stop_tx(&dport->port); 273 spin_unlock(&dport->port.lock); 274 return; 275 } 276 277 /* 278 * If something to do... (remember the dz has no output fifo, 279 * so we go one char at a time) :-< 280 */ 281 tmp = xmit->buf[xmit->tail]; 282 dz_out(dport, DZ_TDR, tmp); 283 uart_xmit_advance(&dport->port, 1); 284 285 if (uart_circ_chars_pending(xmit) < DZ_WAKEUP_CHARS) 286 uart_write_wakeup(&dport->port); 287 288 /* Are we are done. */ 289 if (uart_circ_empty(xmit)) { 290 spin_lock(&dport->port.lock); 291 dz_stop_tx(&dport->port); 292 spin_unlock(&dport->port.lock); 293 } 294 } 295 296 /* 297 * ------------------------------------------------------------ 298 * check_modem_status() 299 * 300 * DS 3100 & 5100: Only valid for the MODEM line, duh! 301 * DS 5000/200: Valid for the MODEM and PRINTER line. 302 * ------------------------------------------------------------ 303 */ 304 static inline void check_modem_status(struct dz_port *dport) 305 { 306 /* 307 * FIXME: 308 * 1. No status change interrupt; use a timer. 309 * 2. Handle the 3100/5000 as appropriate. --macro 310 */ 311 u16 status; 312 313 /* If not the modem line just return. */ 314 if (dport->port.line != DZ_MODEM) 315 return; 316 317 status = dz_in(dport, DZ_MSR); 318 319 /* it's easy, since DSR2 is the only bit in the register */ 320 if (status) 321 dport->port.icount.dsr++; 322 } 323 324 /* 325 * ------------------------------------------------------------ 326 * dz_interrupt () 327 * 328 * this is the main interrupt routine for the DZ chip. 329 * It deals with the multiple ports. 330 * ------------------------------------------------------------ 331 */ 332 static irqreturn_t dz_interrupt(int irq, void *dev_id) 333 { 334 struct dz_mux *mux = dev_id; 335 struct dz_port *dport = &mux->dport[0]; 336 u16 status; 337 338 /* get the reason why we just got an irq */ 339 status = dz_in(dport, DZ_CSR); 340 341 if ((status & (DZ_RDONE | DZ_RIE)) == (DZ_RDONE | DZ_RIE)) 342 dz_receive_chars(mux); 343 344 if ((status & (DZ_TRDY | DZ_TIE)) == (DZ_TRDY | DZ_TIE)) 345 dz_transmit_chars(mux); 346 347 return IRQ_HANDLED; 348 } 349 350 /* 351 * ------------------------------------------------------------------- 352 * Here ends the DZ interrupt routines. 353 * ------------------------------------------------------------------- 354 */ 355 356 static unsigned int dz_get_mctrl(struct uart_port *uport) 357 { 358 /* 359 * FIXME: Handle the 3100/5000 as appropriate. --macro 360 */ 361 struct dz_port *dport = to_dport(uport); 362 unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; 363 364 if (dport->port.line == DZ_MODEM) { 365 if (dz_in(dport, DZ_MSR) & DZ_MODEM_DSR) 366 mctrl &= ~TIOCM_DSR; 367 } 368 369 return mctrl; 370 } 371 372 static void dz_set_mctrl(struct uart_port *uport, unsigned int mctrl) 373 { 374 /* 375 * FIXME: Handle the 3100/5000 as appropriate. --macro 376 */ 377 struct dz_port *dport = to_dport(uport); 378 u16 tmp; 379 380 if (dport->port.line == DZ_MODEM) { 381 tmp = dz_in(dport, DZ_TCR); 382 if (mctrl & TIOCM_DTR) 383 tmp &= ~DZ_MODEM_DTR; 384 else 385 tmp |= DZ_MODEM_DTR; 386 dz_out(dport, DZ_TCR, tmp); 387 } 388 } 389 390 /* 391 * ------------------------------------------------------------------- 392 * startup () 393 * 394 * various initialization tasks 395 * ------------------------------------------------------------------- 396 */ 397 static int dz_startup(struct uart_port *uport) 398 { 399 struct dz_port *dport = to_dport(uport); 400 struct dz_mux *mux = dport->mux; 401 unsigned long flags; 402 int irq_guard; 403 int ret; 404 u16 tmp; 405 406 irq_guard = atomic_add_return(1, &mux->irq_guard); 407 if (irq_guard != 1) 408 return 0; 409 410 ret = request_irq(dport->port.irq, dz_interrupt, 411 IRQF_SHARED, "dz", mux); 412 if (ret) { 413 atomic_add(-1, &mux->irq_guard); 414 printk(KERN_ERR "dz: Cannot get IRQ %d!\n", dport->port.irq); 415 return ret; 416 } 417 418 spin_lock_irqsave(&dport->port.lock, flags); 419 420 /* Enable interrupts. */ 421 tmp = dz_in(dport, DZ_CSR); 422 tmp |= DZ_RIE | DZ_TIE; 423 dz_out(dport, DZ_CSR, tmp); 424 425 spin_unlock_irqrestore(&dport->port.lock, flags); 426 427 return 0; 428 } 429 430 /* 431 * ------------------------------------------------------------------- 432 * shutdown () 433 * 434 * This routine will shutdown a serial port; interrupts are disabled, and 435 * DTR is dropped if the hangup on close termio flag is on. 436 * ------------------------------------------------------------------- 437 */ 438 static void dz_shutdown(struct uart_port *uport) 439 { 440 struct dz_port *dport = to_dport(uport); 441 struct dz_mux *mux = dport->mux; 442 unsigned long flags; 443 int irq_guard; 444 u16 tmp; 445 446 spin_lock_irqsave(&dport->port.lock, flags); 447 dz_stop_tx(&dport->port); 448 spin_unlock_irqrestore(&dport->port.lock, flags); 449 450 irq_guard = atomic_add_return(-1, &mux->irq_guard); 451 if (!irq_guard) { 452 /* Disable interrupts. */ 453 tmp = dz_in(dport, DZ_CSR); 454 tmp &= ~(DZ_RIE | DZ_TIE); 455 dz_out(dport, DZ_CSR, tmp); 456 457 free_irq(dport->port.irq, mux); 458 } 459 } 460 461 /* 462 * ------------------------------------------------------------------- 463 * dz_tx_empty() -- get the transmitter empty status 464 * 465 * Purpose: Let user call ioctl() to get info when the UART physically 466 * is emptied. On bus types like RS485, the transmitter must 467 * release the bus after transmitting. This must be done when 468 * the transmit shift register is empty, not be done when the 469 * transmit holding register is empty. This functionality 470 * allows an RS485 driver to be written in user space. 471 * ------------------------------------------------------------------- 472 */ 473 static unsigned int dz_tx_empty(struct uart_port *uport) 474 { 475 struct dz_port *dport = to_dport(uport); 476 unsigned short tmp, mask = 1 << dport->port.line; 477 478 tmp = dz_in(dport, DZ_TCR); 479 tmp &= mask; 480 481 return tmp ? 0 : TIOCSER_TEMT; 482 } 483 484 static void dz_break_ctl(struct uart_port *uport, int break_state) 485 { 486 /* 487 * FIXME: Can't access BREAK bits in TDR easily; 488 * reuse the code for polled TX. --macro 489 */ 490 struct dz_port *dport = to_dport(uport); 491 unsigned long flags; 492 unsigned short tmp, mask = 1 << dport->port.line; 493 494 spin_lock_irqsave(&uport->lock, flags); 495 tmp = dz_in(dport, DZ_TCR); 496 if (break_state) 497 tmp |= mask; 498 else 499 tmp &= ~mask; 500 dz_out(dport, DZ_TCR, tmp); 501 spin_unlock_irqrestore(&uport->lock, flags); 502 } 503 504 static int dz_encode_baud_rate(unsigned int baud) 505 { 506 switch (baud) { 507 case 50: 508 return DZ_B50; 509 case 75: 510 return DZ_B75; 511 case 110: 512 return DZ_B110; 513 case 134: 514 return DZ_B134; 515 case 150: 516 return DZ_B150; 517 case 300: 518 return DZ_B300; 519 case 600: 520 return DZ_B600; 521 case 1200: 522 return DZ_B1200; 523 case 1800: 524 return DZ_B1800; 525 case 2000: 526 return DZ_B2000; 527 case 2400: 528 return DZ_B2400; 529 case 3600: 530 return DZ_B3600; 531 case 4800: 532 return DZ_B4800; 533 case 7200: 534 return DZ_B7200; 535 case 9600: 536 return DZ_B9600; 537 default: 538 return -1; 539 } 540 } 541 542 543 static void dz_reset(struct dz_port *dport) 544 { 545 struct dz_mux *mux = dport->mux; 546 547 if (mux->initialised) 548 return; 549 550 dz_out(dport, DZ_CSR, DZ_CLR); 551 while (dz_in(dport, DZ_CSR) & DZ_CLR); 552 iob(); 553 554 /* Enable scanning. */ 555 dz_out(dport, DZ_CSR, DZ_MSE); 556 557 mux->initialised = 1; 558 } 559 560 static void dz_set_termios(struct uart_port *uport, struct ktermios *termios, 561 const struct ktermios *old_termios) 562 { 563 struct dz_port *dport = to_dport(uport); 564 unsigned long flags; 565 unsigned int cflag, baud; 566 int bflag; 567 568 cflag = dport->port.line; 569 570 switch (termios->c_cflag & CSIZE) { 571 case CS5: 572 cflag |= DZ_CS5; 573 break; 574 case CS6: 575 cflag |= DZ_CS6; 576 break; 577 case CS7: 578 cflag |= DZ_CS7; 579 break; 580 case CS8: 581 default: 582 cflag |= DZ_CS8; 583 } 584 585 if (termios->c_cflag & CSTOPB) 586 cflag |= DZ_CSTOPB; 587 if (termios->c_cflag & PARENB) 588 cflag |= DZ_PARENB; 589 if (termios->c_cflag & PARODD) 590 cflag |= DZ_PARODD; 591 592 baud = uart_get_baud_rate(uport, termios, old_termios, 50, 9600); 593 bflag = dz_encode_baud_rate(baud); 594 if (bflag < 0) { 595 if (old_termios) { 596 /* Keep unchanged. */ 597 baud = tty_termios_baud_rate(old_termios); 598 bflag = dz_encode_baud_rate(baud); 599 } 600 if (bflag < 0) { /* Resort to 9600. */ 601 baud = 9600; 602 bflag = DZ_B9600; 603 } 604 tty_termios_encode_baud_rate(termios, baud, baud); 605 } 606 cflag |= bflag; 607 608 if (termios->c_cflag & CREAD) 609 cflag |= DZ_RXENAB; 610 611 spin_lock_irqsave(&dport->port.lock, flags); 612 613 uart_update_timeout(uport, termios->c_cflag, baud); 614 615 dz_out(dport, DZ_LPR, cflag); 616 dport->cflag = cflag; 617 618 /* setup accept flag */ 619 dport->port.read_status_mask = DZ_OERR; 620 if (termios->c_iflag & INPCK) 621 dport->port.read_status_mask |= DZ_FERR | DZ_PERR; 622 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) 623 dport->port.read_status_mask |= DZ_BREAK; 624 625 /* characters to ignore */ 626 uport->ignore_status_mask = 0; 627 if ((termios->c_iflag & (IGNPAR | IGNBRK)) == (IGNPAR | IGNBRK)) 628 dport->port.ignore_status_mask |= DZ_OERR; 629 if (termios->c_iflag & IGNPAR) 630 dport->port.ignore_status_mask |= DZ_FERR | DZ_PERR; 631 if (termios->c_iflag & IGNBRK) 632 dport->port.ignore_status_mask |= DZ_BREAK; 633 634 spin_unlock_irqrestore(&dport->port.lock, flags); 635 } 636 637 /* 638 * Hack alert! 639 * Required solely so that the initial PROM-based console 640 * works undisturbed in parallel with this one. 641 */ 642 static void dz_pm(struct uart_port *uport, unsigned int state, 643 unsigned int oldstate) 644 { 645 struct dz_port *dport = to_dport(uport); 646 unsigned long flags; 647 648 spin_lock_irqsave(&dport->port.lock, flags); 649 if (state < 3) 650 dz_start_tx(&dport->port); 651 else 652 dz_stop_tx(&dport->port); 653 spin_unlock_irqrestore(&dport->port.lock, flags); 654 } 655 656 657 static const char *dz_type(struct uart_port *uport) 658 { 659 return "DZ"; 660 } 661 662 static void dz_release_port(struct uart_port *uport) 663 { 664 struct dz_mux *mux = to_dport(uport)->mux; 665 int map_guard; 666 667 iounmap(uport->membase); 668 uport->membase = NULL; 669 670 map_guard = atomic_add_return(-1, &mux->map_guard); 671 if (!map_guard) 672 release_mem_region(uport->mapbase, dec_kn_slot_size); 673 } 674 675 static int dz_map_port(struct uart_port *uport) 676 { 677 if (!uport->membase) 678 uport->membase = ioremap(uport->mapbase, 679 dec_kn_slot_size); 680 if (!uport->membase) { 681 printk(KERN_ERR "dz: Cannot map MMIO\n"); 682 return -ENOMEM; 683 } 684 return 0; 685 } 686 687 static int dz_request_port(struct uart_port *uport) 688 { 689 struct dz_mux *mux = to_dport(uport)->mux; 690 int map_guard; 691 int ret; 692 693 map_guard = atomic_add_return(1, &mux->map_guard); 694 if (map_guard == 1) { 695 if (!request_mem_region(uport->mapbase, dec_kn_slot_size, 696 "dz")) { 697 atomic_add(-1, &mux->map_guard); 698 printk(KERN_ERR 699 "dz: Unable to reserve MMIO resource\n"); 700 return -EBUSY; 701 } 702 } 703 ret = dz_map_port(uport); 704 if (ret) { 705 map_guard = atomic_add_return(-1, &mux->map_guard); 706 if (!map_guard) 707 release_mem_region(uport->mapbase, dec_kn_slot_size); 708 return ret; 709 } 710 return 0; 711 } 712 713 static void dz_config_port(struct uart_port *uport, int flags) 714 { 715 struct dz_port *dport = to_dport(uport); 716 717 if (flags & UART_CONFIG_TYPE) { 718 if (dz_request_port(uport)) 719 return; 720 721 uport->type = PORT_DZ; 722 723 dz_reset(dport); 724 } 725 } 726 727 /* 728 * Verify the new serial_struct (for TIOCSSERIAL). 729 */ 730 static int dz_verify_port(struct uart_port *uport, struct serial_struct *ser) 731 { 732 int ret = 0; 733 734 if (ser->type != PORT_UNKNOWN && ser->type != PORT_DZ) 735 ret = -EINVAL; 736 if (ser->irq != uport->irq) 737 ret = -EINVAL; 738 return ret; 739 } 740 741 static const struct uart_ops dz_ops = { 742 .tx_empty = dz_tx_empty, 743 .get_mctrl = dz_get_mctrl, 744 .set_mctrl = dz_set_mctrl, 745 .stop_tx = dz_stop_tx, 746 .start_tx = dz_start_tx, 747 .stop_rx = dz_stop_rx, 748 .break_ctl = dz_break_ctl, 749 .startup = dz_startup, 750 .shutdown = dz_shutdown, 751 .set_termios = dz_set_termios, 752 .pm = dz_pm, 753 .type = dz_type, 754 .release_port = dz_release_port, 755 .request_port = dz_request_port, 756 .config_port = dz_config_port, 757 .verify_port = dz_verify_port, 758 }; 759 760 static void __init dz_init_ports(void) 761 { 762 static int first = 1; 763 unsigned long base; 764 int line; 765 766 if (!first) 767 return; 768 first = 0; 769 770 if (mips_machtype == MACH_DS23100 || mips_machtype == MACH_DS5100) 771 base = dec_kn_slot_base + KN01_DZ11; 772 else 773 base = dec_kn_slot_base + KN02_DZ11; 774 775 for (line = 0; line < DZ_NB_PORT; line++) { 776 struct dz_port *dport = &dz_mux.dport[line]; 777 struct uart_port *uport = &dport->port; 778 779 dport->mux = &dz_mux; 780 781 uport->irq = dec_interrupt[DEC_IRQ_DZ11]; 782 uport->fifosize = 1; 783 uport->iotype = UPIO_MEM; 784 uport->flags = UPF_BOOT_AUTOCONF; 785 uport->ops = &dz_ops; 786 uport->line = line; 787 uport->mapbase = base; 788 uport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_DZ_CONSOLE); 789 } 790 } 791 792 #ifdef CONFIG_SERIAL_DZ_CONSOLE 793 /* 794 * ------------------------------------------------------------------- 795 * dz_console_putchar() -- transmit a character 796 * 797 * Polled transmission. This is tricky. We need to mask transmit 798 * interrupts so that they do not interfere, enable the transmitter 799 * for the line requested and then wait till the transmit scanner 800 * requests data for this line. But it may request data for another 801 * line first, in which case we have to disable its transmitter and 802 * repeat waiting till our line pops up. Only then the character may 803 * be transmitted. Finally, the state of the transmitter mask is 804 * restored. Welcome to the world of PDP-11! 805 * ------------------------------------------------------------------- 806 */ 807 static void dz_console_putchar(struct uart_port *uport, unsigned char ch) 808 { 809 struct dz_port *dport = to_dport(uport); 810 unsigned long flags; 811 unsigned short csr, tcr, trdy, mask; 812 int loops = 10000; 813 814 spin_lock_irqsave(&dport->port.lock, flags); 815 csr = dz_in(dport, DZ_CSR); 816 dz_out(dport, DZ_CSR, csr & ~DZ_TIE); 817 tcr = dz_in(dport, DZ_TCR); 818 tcr |= 1 << dport->port.line; 819 mask = tcr; 820 dz_out(dport, DZ_TCR, mask); 821 iob(); 822 spin_unlock_irqrestore(&dport->port.lock, flags); 823 824 do { 825 trdy = dz_in(dport, DZ_CSR); 826 if (!(trdy & DZ_TRDY)) 827 continue; 828 trdy = (trdy & DZ_TLINE) >> 8; 829 if (trdy == dport->port.line) 830 break; 831 mask &= ~(1 << trdy); 832 dz_out(dport, DZ_TCR, mask); 833 iob(); 834 udelay(2); 835 } while (--loops); 836 837 if (loops) /* Cannot send otherwise. */ 838 dz_out(dport, DZ_TDR, ch); 839 840 dz_out(dport, DZ_TCR, tcr); 841 dz_out(dport, DZ_CSR, csr); 842 } 843 844 /* 845 * ------------------------------------------------------------------- 846 * dz_console_print () 847 * 848 * dz_console_print is registered for printk. 849 * The console must be locked when we get here. 850 * ------------------------------------------------------------------- 851 */ 852 static void dz_console_print(struct console *co, 853 const char *str, 854 unsigned int count) 855 { 856 struct dz_port *dport = &dz_mux.dport[co->index]; 857 #ifdef DEBUG_DZ 858 prom_printf((char *) str); 859 #endif 860 uart_console_write(&dport->port, str, count, dz_console_putchar); 861 } 862 863 static int __init dz_console_setup(struct console *co, char *options) 864 { 865 struct dz_port *dport = &dz_mux.dport[co->index]; 866 struct uart_port *uport = &dport->port; 867 int baud = 9600; 868 int bits = 8; 869 int parity = 'n'; 870 int flow = 'n'; 871 int ret; 872 873 ret = dz_map_port(uport); 874 if (ret) 875 return ret; 876 877 spin_lock_init(&dport->port.lock); /* For dz_pm(). */ 878 879 dz_reset(dport); 880 dz_pm(uport, 0, -1); 881 882 if (options) 883 uart_parse_options(options, &baud, &parity, &bits, &flow); 884 885 return uart_set_options(&dport->port, co, baud, parity, bits, flow); 886 } 887 888 static struct uart_driver dz_reg; 889 static struct console dz_console = { 890 .name = "ttyS", 891 .write = dz_console_print, 892 .device = uart_console_device, 893 .setup = dz_console_setup, 894 .flags = CON_PRINTBUFFER, 895 .index = -1, 896 .data = &dz_reg, 897 }; 898 899 static int __init dz_serial_console_init(void) 900 { 901 if (!IOASIC) { 902 dz_init_ports(); 903 register_console(&dz_console); 904 return 0; 905 } else 906 return -ENXIO; 907 } 908 909 console_initcall(dz_serial_console_init); 910 911 #define SERIAL_DZ_CONSOLE &dz_console 912 #else 913 #define SERIAL_DZ_CONSOLE NULL 914 #endif /* CONFIG_SERIAL_DZ_CONSOLE */ 915 916 static struct uart_driver dz_reg = { 917 .owner = THIS_MODULE, 918 .driver_name = "serial", 919 .dev_name = "ttyS", 920 .major = TTY_MAJOR, 921 .minor = 64, 922 .nr = DZ_NB_PORT, 923 .cons = SERIAL_DZ_CONSOLE, 924 }; 925 926 static int __init dz_init(void) 927 { 928 int ret, i; 929 930 if (IOASIC) 931 return -ENXIO; 932 933 printk("%s%s\n", dz_name, dz_version); 934 935 dz_init_ports(); 936 937 ret = uart_register_driver(&dz_reg); 938 if (ret) 939 return ret; 940 941 for (i = 0; i < DZ_NB_PORT; i++) 942 uart_add_one_port(&dz_reg, &dz_mux.dport[i].port); 943 944 return 0; 945 } 946 947 module_init(dz_init); 948