1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * include/linux/atmel_serial.h 4 * 5 * Copyright (C) 2005 Ivan Kokshaysky 6 * Copyright (C) SAN People 7 * 8 * USART registers. 9 * Based on AT91RM9200 datasheet revision E. 10 */ 11 12 #ifndef ATMEL_SERIAL_H 13 #define ATMEL_SERIAL_H 14 15 #define ATMEL_US_CR 0x00 /* Control Register */ 16 #define ATMEL_US_RSTRX BIT(2) /* Reset Receiver */ 17 #define ATMEL_US_RSTTX BIT(3) /* Reset Transmitter */ 18 #define ATMEL_US_RXEN BIT(4) /* Receiver Enable */ 19 #define ATMEL_US_RXDIS BIT(5) /* Receiver Disable */ 20 #define ATMEL_US_TXEN BIT(6) /* Transmitter Enable */ 21 #define ATMEL_US_TXDIS BIT(7) /* Transmitter Disable */ 22 #define ATMEL_US_RSTSTA BIT(8) /* Reset Status Bits */ 23 #define ATMEL_US_STTBRK BIT(9) /* Start Break */ 24 #define ATMEL_US_STPBRK BIT(10) /* Stop Break */ 25 #define ATMEL_US_STTTO BIT(11) /* Start Time-out */ 26 #define ATMEL_US_SENDA BIT(12) /* Send Address */ 27 #define ATMEL_US_RSTIT BIT(13) /* Reset Iterations */ 28 #define ATMEL_US_RSTNACK BIT(14) /* Reset Non Acknowledge */ 29 #define ATMEL_US_RETTO BIT(15) /* Rearm Time-out */ 30 #define ATMEL_US_DTREN BIT(16) /* Data Terminal Ready Enable */ 31 #define ATMEL_US_DTRDIS BIT(17) /* Data Terminal Ready Disable */ 32 #define ATMEL_US_RTSEN BIT(18) /* Request To Send Enable */ 33 #define ATMEL_US_RTSDIS BIT(19) /* Request To Send Disable */ 34 #define ATMEL_US_TXFCLR BIT(24) /* Transmit FIFO Clear */ 35 #define ATMEL_US_RXFCLR BIT(25) /* Receive FIFO Clear */ 36 #define ATMEL_US_TXFLCLR BIT(26) /* Transmit FIFO Lock Clear */ 37 #define ATMEL_US_FIFOEN BIT(30) /* FIFO enable */ 38 #define ATMEL_US_FIFODIS BIT(31) /* FIFO disable */ 39 40 #define ATMEL_US_MR 0x04 /* Mode Register */ 41 #define ATMEL_US_USMODE GENMASK(3, 0) /* Mode of the USART */ 42 #define ATMEL_US_USMODE_NORMAL 0 43 #define ATMEL_US_USMODE_RS485 1 44 #define ATMEL_US_USMODE_HWHS 2 45 #define ATMEL_US_USMODE_MODEM 3 46 #define ATMEL_US_USMODE_ISO7816_T0 4 47 #define ATMEL_US_USMODE_ISO7816_T1 6 48 #define ATMEL_US_USMODE_IRDA 8 49 #define ATMEL_US_USCLKS GENMASK(5, 4) /* Clock Selection */ 50 #define ATMEL_US_USCLKS_MCK (0 << 4) 51 #define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4) 52 #define ATMEL_US_USCLKS_SCK (3 << 4) 53 #define ATMEL_US_CHRL GENMASK(7, 6) /* Character Length */ 54 #define ATMEL_US_CHRL_5 (0 << 6) 55 #define ATMEL_US_CHRL_6 (1 << 6) 56 #define ATMEL_US_CHRL_7 (2 << 6) 57 #define ATMEL_US_CHRL_8 (3 << 6) 58 #define ATMEL_US_SYNC BIT(8) /* Synchronous Mode Select */ 59 #define ATMEL_US_PAR GENMASK(11, 9) /* Parity Type */ 60 #define ATMEL_US_PAR_EVEN (0 << 9) 61 #define ATMEL_US_PAR_ODD (1 << 9) 62 #define ATMEL_US_PAR_SPACE (2 << 9) 63 #define ATMEL_US_PAR_MARK (3 << 9) 64 #define ATMEL_US_PAR_NONE (4 << 9) 65 #define ATMEL_US_PAR_MULTI_DROP (6 << 9) 66 #define ATMEL_US_NBSTOP GENMASK(13, 12) /* Number of Stop Bits */ 67 #define ATMEL_US_NBSTOP_1 (0 << 12) 68 #define ATMEL_US_NBSTOP_1_5 (1 << 12) 69 #define ATMEL_US_NBSTOP_2 (2 << 12) 70 #define ATMEL_US_CHMODE GENMASK(15, 14) /* Channel Mode */ 71 #define ATMEL_US_CHMODE_NORMAL (0 << 14) 72 #define ATMEL_US_CHMODE_ECHO (1 << 14) 73 #define ATMEL_US_CHMODE_LOC_LOOP (2 << 14) 74 #define ATMEL_US_CHMODE_REM_LOOP (3 << 14) 75 #define ATMEL_US_MSBF BIT(16) /* Bit Order */ 76 #define ATMEL_US_MODE9 BIT(17) /* 9-bit Character Length */ 77 #define ATMEL_US_CLKO BIT(18) /* Clock Output Select */ 78 #define ATMEL_US_OVER BIT(19) /* Oversampling Mode */ 79 #define ATMEL_US_INACK BIT(20) /* Inhibit Non Acknowledge */ 80 #define ATMEL_US_DSNACK BIT(21) /* Disable Successive NACK */ 81 #define ATMEL_US_MAX_ITER_MASK GENMASK(26, 24) /* Max Iterations */ 82 #define ATMEL_US_MAX_ITER(n) (((n) << 24) & ATMEL_US_MAX_ITER_MASK) 83 #define ATMEL_US_FILTER BIT(28) /* Infrared Receive Line Filter */ 84 85 #define ATMEL_US_IER 0x08 /* Interrupt Enable Register */ 86 #define ATMEL_US_RXRDY BIT(0) /* Receiver Ready */ 87 #define ATMEL_US_TXRDY BIT(1) /* Transmitter Ready */ 88 #define ATMEL_US_RXBRK BIT(2) /* Break Received / End of Break */ 89 #define ATMEL_US_ENDRX BIT(3) /* End of Receiver Transfer */ 90 #define ATMEL_US_ENDTX BIT(4) /* End of Transmitter Transfer */ 91 #define ATMEL_US_OVRE BIT(5) /* Overrun Error */ 92 #define ATMEL_US_FRAME BIT(6) /* Framing Error */ 93 #define ATMEL_US_PARE BIT(7) /* Parity Error */ 94 #define ATMEL_US_TIMEOUT BIT(8) /* Receiver Time-out */ 95 #define ATMEL_US_TXEMPTY BIT(9) /* Transmitter Empty */ 96 #define ATMEL_US_ITERATION BIT(10) /* Max number of Repetitions Reached */ 97 #define ATMEL_US_TXBUFE BIT(11) /* Transmission Buffer Empty */ 98 #define ATMEL_US_RXBUFF BIT(12) /* Reception Buffer Full */ 99 #define ATMEL_US_NACK BIT(13) /* Non Acknowledge */ 100 #define ATMEL_US_RIIC BIT(16) /* Ring Indicator Input Change */ 101 #define ATMEL_US_DSRIC BIT(17) /* Data Set Ready Input Change */ 102 #define ATMEL_US_DCDIC BIT(18) /* Data Carrier Detect Input Change */ 103 #define ATMEL_US_CTSIC BIT(19) /* Clear to Send Input Change */ 104 #define ATMEL_US_RI BIT(20) /* RI */ 105 #define ATMEL_US_DSR BIT(21) /* DSR */ 106 #define ATMEL_US_DCD BIT(22) /* DCD */ 107 #define ATMEL_US_CTS BIT(23) /* CTS */ 108 109 #define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */ 110 #define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */ 111 #define ATMEL_US_CSR 0x14 /* Channel Status Register */ 112 #define ATMEL_US_RHR 0x18 /* Receiver Holding Register */ 113 #define ATMEL_US_THR 0x1c /* Transmitter Holding Register */ 114 #define ATMEL_US_SYNH BIT(15) /* Transmit/Receive Sync */ 115 116 #define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */ 117 #define ATMEL_US_CD GENMASK(15, 0) /* Clock Divider */ 118 #define ATMEL_US_FP_OFFSET 16 /* Fractional Part */ 119 #define ATMEL_US_FP_MASK 0x7 120 121 #define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register for USART */ 122 #define ATMEL_UA_RTOR 0x28 /* Receiver Time-out Register for UART */ 123 #define ATMEL_US_TO GENMASK(15, 0) /* Time-out Value */ 124 125 #define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */ 126 #define ATMEL_US_TG GENMASK(7, 0) /* Timeguard Value */ 127 128 #define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */ 129 #define ATMEL_US_NER 0x44 /* Number of Errors Register */ 130 #define ATMEL_US_IF 0x4c /* IrDA Filter Register */ 131 132 #define ATMEL_US_CMPR 0x90 /* Comparaison Register */ 133 #define ATMEL_US_FMR 0xa0 /* FIFO Mode Register */ 134 #define ATMEL_US_TXRDYM(data) (((data) & 0x3) << 0) /* TX Ready Mode */ 135 #define ATMEL_US_RXRDYM(data) (((data) & 0x3) << 4) /* RX Ready Mode */ 136 #define ATMEL_US_ONE_DATA 0x0 137 #define ATMEL_US_TWO_DATA 0x1 138 #define ATMEL_US_FOUR_DATA 0x2 139 #define ATMEL_US_FRTSC BIT(7) /* FIFO RTS pin Control */ 140 #define ATMEL_US_TXFTHRES(thr) (((thr) & 0x3f) << 8) /* TX FIFO Threshold */ 141 #define ATMEL_US_RXFTHRES(thr) (((thr) & 0x3f) << 16) /* RX FIFO Threshold */ 142 #define ATMEL_US_RXFTHRES2(thr) (((thr) & 0x3f) << 24) /* RX FIFO Threshold2 */ 143 144 #define ATMEL_US_FLR 0xa4 /* FIFO Level Register */ 145 #define ATMEL_US_TXFL(reg) (((reg) >> 0) & 0x3f) /* TX FIFO Level */ 146 #define ATMEL_US_RXFL(reg) (((reg) >> 16) & 0x3f) /* RX FIFO Level */ 147 148 #define ATMEL_US_FIER 0xa8 /* FIFO Interrupt Enable Register */ 149 #define ATMEL_US_FIDR 0xac /* FIFO Interrupt Disable Register */ 150 #define ATMEL_US_FIMR 0xb0 /* FIFO Interrupt Mask Register */ 151 #define ATMEL_US_FESR 0xb4 /* FIFO Event Status Register */ 152 #define ATMEL_US_TXFEF BIT(0) /* Transmit FIFO Empty Flag */ 153 #define ATMEL_US_TXFFF BIT(1) /* Transmit FIFO Full Flag */ 154 #define ATMEL_US_TXFTHF BIT(2) /* Transmit FIFO Threshold Flag */ 155 #define ATMEL_US_RXFEF BIT(3) /* Receive FIFO Empty Flag */ 156 #define ATMEL_US_RXFFF BIT(4) /* Receive FIFO Full Flag */ 157 #define ATMEL_US_RXFTHF BIT(5) /* Receive FIFO Threshold Flag */ 158 #define ATMEL_US_TXFPTEF BIT(6) /* Transmit FIFO Pointer Error Flag */ 159 #define ATMEL_US_RXFPTEF BIT(7) /* Receive FIFO Pointer Error Flag */ 160 #define ATMEL_US_TXFLOCK BIT(8) /* Transmit FIFO Lock (FESR only) */ 161 #define ATMEL_US_RXFTHF2 BIT(9) /* Receive FIFO Threshold Flag 2 */ 162 163 #define ATMEL_US_NAME 0xf0 /* Ip Name */ 164 #define ATMEL_US_VERSION 0xfc /* Ip Version */ 165 166 #endif 167