xref: /openbmc/linux/drivers/tty/serial/altera_uart.c (revision d0b73b48) 
1 /*
2  * altera_uart.c -- Altera UART driver
3  *
4  * Based on mcf.c -- Freescale ColdFire UART driver
5  *
6  * (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com>
7  * (C) Copyright 2008, Thomas Chou <thomas@wytron.com.tw>
8  * (C) Copyright 2010, Tobias Klauser <tklauser@distanz.ch>
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License as published by
12  * the Free Software Foundation; either version 2 of the License, or
13  * (at your option) any later version.
14  */
15 
16 #include <linux/kernel.h>
17 #include <linux/init.h>
18 #include <linux/timer.h>
19 #include <linux/interrupt.h>
20 #include <linux/module.h>
21 #include <linux/console.h>
22 #include <linux/tty.h>
23 #include <linux/tty_flip.h>
24 #include <linux/serial.h>
25 #include <linux/serial_core.h>
26 #include <linux/platform_device.h>
27 #include <linux/of.h>
28 #include <linux/io.h>
29 #include <linux/altera_uart.h>
30 
31 #define DRV_NAME "altera_uart"
32 #define SERIAL_ALTERA_MAJOR 204
33 #define SERIAL_ALTERA_MINOR 213
34 
35 /*
36  * Altera UART register definitions according to the Nios UART datasheet:
37  * http://www.altera.com/literature/ds/ds_nios_uart.pdf
38  */
39 
40 #define ALTERA_UART_SIZE		32
41 
42 #define ALTERA_UART_RXDATA_REG		0
43 #define ALTERA_UART_TXDATA_REG		4
44 #define ALTERA_UART_STATUS_REG		8
45 #define ALTERA_UART_CONTROL_REG		12
46 #define ALTERA_UART_DIVISOR_REG		16
47 #define ALTERA_UART_EOP_REG		20
48 
49 #define ALTERA_UART_STATUS_PE_MSK	0x0001	/* parity error */
50 #define ALTERA_UART_STATUS_FE_MSK	0x0002	/* framing error */
51 #define ALTERA_UART_STATUS_BRK_MSK	0x0004	/* break */
52 #define ALTERA_UART_STATUS_ROE_MSK	0x0008	/* RX overrun error */
53 #define ALTERA_UART_STATUS_TOE_MSK	0x0010	/* TX overrun error */
54 #define ALTERA_UART_STATUS_TMT_MSK	0x0020	/* TX shift register state */
55 #define ALTERA_UART_STATUS_TRDY_MSK	0x0040	/* TX ready */
56 #define ALTERA_UART_STATUS_RRDY_MSK	0x0080	/* RX ready */
57 #define ALTERA_UART_STATUS_E_MSK	0x0100	/* exception condition */
58 #define ALTERA_UART_STATUS_DCTS_MSK	0x0400	/* CTS logic-level change */
59 #define ALTERA_UART_STATUS_CTS_MSK	0x0800	/* CTS logic state */
60 #define ALTERA_UART_STATUS_EOP_MSK	0x1000	/* EOP written/read */
61 
62 						/* Enable interrupt on... */
63 #define ALTERA_UART_CONTROL_PE_MSK	0x0001	/* ...parity error */
64 #define ALTERA_UART_CONTROL_FE_MSK	0x0002	/* ...framing error */
65 #define ALTERA_UART_CONTROL_BRK_MSK	0x0004	/* ...break */
66 #define ALTERA_UART_CONTROL_ROE_MSK	0x0008	/* ...RX overrun */
67 #define ALTERA_UART_CONTROL_TOE_MSK	0x0010	/* ...TX overrun */
68 #define ALTERA_UART_CONTROL_TMT_MSK	0x0020	/* ...TX shift register empty */
69 #define ALTERA_UART_CONTROL_TRDY_MSK	0x0040	/* ...TX ready */
70 #define ALTERA_UART_CONTROL_RRDY_MSK	0x0080	/* ...RX ready */
71 #define ALTERA_UART_CONTROL_E_MSK	0x0100	/* ...exception*/
72 
73 #define ALTERA_UART_CONTROL_TRBK_MSK	0x0200	/* TX break */
74 #define ALTERA_UART_CONTROL_DCTS_MSK	0x0400	/* Interrupt on CTS change */
75 #define ALTERA_UART_CONTROL_RTS_MSK	0x0800	/* RTS signal */
76 #define ALTERA_UART_CONTROL_EOP_MSK	0x1000	/* Interrupt on EOP */
77 
78 /*
79  * Local per-uart structure.
80  */
81 struct altera_uart {
82 	struct uart_port port;
83 	struct timer_list tmr;
84 	unsigned int sigs;	/* Local copy of line sigs */
85 	unsigned short imr;	/* Local IMR mirror */
86 };
87 
88 static u32 altera_uart_readl(struct uart_port *port, int reg)
89 {
90 	return readl(port->membase + (reg << port->regshift));
91 }
92 
93 static void altera_uart_writel(struct uart_port *port, u32 dat, int reg)
94 {
95 	writel(dat, port->membase + (reg << port->regshift));
96 }
97 
98 static unsigned int altera_uart_tx_empty(struct uart_port *port)
99 {
100 	return (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
101 		ALTERA_UART_STATUS_TMT_MSK) ? TIOCSER_TEMT : 0;
102 }
103 
104 static unsigned int altera_uart_get_mctrl(struct uart_port *port)
105 {
106 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
107 	unsigned int sigs;
108 
109 	sigs = (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
110 	     ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0;
111 	sigs |= (pp->sigs & TIOCM_RTS);
112 
113 	return sigs;
114 }
115 
116 static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs)
117 {
118 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
119 
120 	pp->sigs = sigs;
121 	if (sigs & TIOCM_RTS)
122 		pp->imr |= ALTERA_UART_CONTROL_RTS_MSK;
123 	else
124 		pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK;
125 	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
126 }
127 
128 static void altera_uart_start_tx(struct uart_port *port)
129 {
130 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
131 
132 	pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK;
133 	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
134 }
135 
136 static void altera_uart_stop_tx(struct uart_port *port)
137 {
138 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
139 
140 	pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
141 	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
142 }
143 
144 static void altera_uart_stop_rx(struct uart_port *port)
145 {
146 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
147 
148 	pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK;
149 	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
150 }
151 
152 static void altera_uart_break_ctl(struct uart_port *port, int break_state)
153 {
154 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
155 	unsigned long flags;
156 
157 	spin_lock_irqsave(&port->lock, flags);
158 	if (break_state == -1)
159 		pp->imr |= ALTERA_UART_CONTROL_TRBK_MSK;
160 	else
161 		pp->imr &= ~ALTERA_UART_CONTROL_TRBK_MSK;
162 	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
163 	spin_unlock_irqrestore(&port->lock, flags);
164 }
165 
166 static void altera_uart_enable_ms(struct uart_port *port)
167 {
168 }
169 
170 static void altera_uart_set_termios(struct uart_port *port,
171 				    struct ktermios *termios,
172 				    struct ktermios *old)
173 {
174 	unsigned long flags;
175 	unsigned int baud, baudclk;
176 
177 	baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
178 	baudclk = port->uartclk / baud;
179 
180 	if (old)
181 		tty_termios_copy_hw(termios, old);
182 	tty_termios_encode_baud_rate(termios, baud, baud);
183 
184 	spin_lock_irqsave(&port->lock, flags);
185 	uart_update_timeout(port, termios->c_cflag, baud);
186 	altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG);
187 	spin_unlock_irqrestore(&port->lock, flags);
188 }
189 
190 static void altera_uart_rx_chars(struct altera_uart *pp)
191 {
192 	struct uart_port *port = &pp->port;
193 	unsigned char ch, flag;
194 	unsigned short status;
195 
196 	while ((status = altera_uart_readl(port, ALTERA_UART_STATUS_REG)) &
197 	       ALTERA_UART_STATUS_RRDY_MSK) {
198 		ch = altera_uart_readl(port, ALTERA_UART_RXDATA_REG);
199 		flag = TTY_NORMAL;
200 		port->icount.rx++;
201 
202 		if (status & ALTERA_UART_STATUS_E_MSK) {
203 			altera_uart_writel(port, status,
204 					   ALTERA_UART_STATUS_REG);
205 
206 			if (status & ALTERA_UART_STATUS_BRK_MSK) {
207 				port->icount.brk++;
208 				if (uart_handle_break(port))
209 					continue;
210 			} else if (status & ALTERA_UART_STATUS_PE_MSK) {
211 				port->icount.parity++;
212 			} else if (status & ALTERA_UART_STATUS_ROE_MSK) {
213 				port->icount.overrun++;
214 			} else if (status & ALTERA_UART_STATUS_FE_MSK) {
215 				port->icount.frame++;
216 			}
217 
218 			status &= port->read_status_mask;
219 
220 			if (status & ALTERA_UART_STATUS_BRK_MSK)
221 				flag = TTY_BREAK;
222 			else if (status & ALTERA_UART_STATUS_PE_MSK)
223 				flag = TTY_PARITY;
224 			else if (status & ALTERA_UART_STATUS_FE_MSK)
225 				flag = TTY_FRAME;
226 		}
227 
228 		if (uart_handle_sysrq_char(port, ch))
229 			continue;
230 		uart_insert_char(port, status, ALTERA_UART_STATUS_ROE_MSK, ch,
231 				 flag);
232 	}
233 
234 	tty_flip_buffer_push(port->state->port.tty);
235 }
236 
237 static void altera_uart_tx_chars(struct altera_uart *pp)
238 {
239 	struct uart_port *port = &pp->port;
240 	struct circ_buf *xmit = &port->state->xmit;
241 
242 	if (port->x_char) {
243 		/* Send special char - probably flow control */
244 		altera_uart_writel(port, port->x_char, ALTERA_UART_TXDATA_REG);
245 		port->x_char = 0;
246 		port->icount.tx++;
247 		return;
248 	}
249 
250 	while (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
251 	       ALTERA_UART_STATUS_TRDY_MSK) {
252 		if (xmit->head == xmit->tail)
253 			break;
254 		altera_uart_writel(port, xmit->buf[xmit->tail],
255 		       ALTERA_UART_TXDATA_REG);
256 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
257 		port->icount.tx++;
258 	}
259 
260 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
261 		uart_write_wakeup(port);
262 
263 	if (xmit->head == xmit->tail) {
264 		pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
265 		altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
266 	}
267 }
268 
269 static irqreturn_t altera_uart_interrupt(int irq, void *data)
270 {
271 	struct uart_port *port = data;
272 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
273 	unsigned int isr;
274 
275 	isr = altera_uart_readl(port, ALTERA_UART_STATUS_REG) & pp->imr;
276 
277 	spin_lock(&port->lock);
278 	if (isr & ALTERA_UART_STATUS_RRDY_MSK)
279 		altera_uart_rx_chars(pp);
280 	if (isr & ALTERA_UART_STATUS_TRDY_MSK)
281 		altera_uart_tx_chars(pp);
282 	spin_unlock(&port->lock);
283 
284 	return IRQ_RETVAL(isr);
285 }
286 
287 static void altera_uart_timer(unsigned long data)
288 {
289 	struct uart_port *port = (void *)data;
290 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
291 
292 	altera_uart_interrupt(0, port);
293 	mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
294 }
295 
296 static void altera_uart_config_port(struct uart_port *port, int flags)
297 {
298 	port->type = PORT_ALTERA_UART;
299 
300 	/* Clear mask, so no surprise interrupts. */
301 	altera_uart_writel(port, 0, ALTERA_UART_CONTROL_REG);
302 	/* Clear status register */
303 	altera_uart_writel(port, 0, ALTERA_UART_STATUS_REG);
304 }
305 
306 static int altera_uart_startup(struct uart_port *port)
307 {
308 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
309 	unsigned long flags;
310 	int ret;
311 
312 	if (!port->irq) {
313 		setup_timer(&pp->tmr, altera_uart_timer, (unsigned long)port);
314 		mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
315 		return 0;
316 	}
317 
318 	ret = request_irq(port->irq, altera_uart_interrupt, 0,
319 			DRV_NAME, port);
320 	if (ret) {
321 		pr_err(DRV_NAME ": unable to attach Altera UART %d "
322 		       "interrupt vector=%d\n", port->line, port->irq);
323 		return ret;
324 	}
325 
326 	spin_lock_irqsave(&port->lock, flags);
327 
328 	/* Enable RX interrupts now */
329 	pp->imr = ALTERA_UART_CONTROL_RRDY_MSK;
330 	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
331 
332 	spin_unlock_irqrestore(&port->lock, flags);
333 
334 	return 0;
335 }
336 
337 static void altera_uart_shutdown(struct uart_port *port)
338 {
339 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
340 	unsigned long flags;
341 
342 	spin_lock_irqsave(&port->lock, flags);
343 
344 	/* Disable all interrupts now */
345 	pp->imr = 0;
346 	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
347 
348 	spin_unlock_irqrestore(&port->lock, flags);
349 
350 	if (port->irq)
351 		free_irq(port->irq, port);
352 	else
353 		del_timer_sync(&pp->tmr);
354 }
355 
356 static const char *altera_uart_type(struct uart_port *port)
357 {
358 	return (port->type == PORT_ALTERA_UART) ? "Altera UART" : NULL;
359 }
360 
361 static int altera_uart_request_port(struct uart_port *port)
362 {
363 	/* UARTs always present */
364 	return 0;
365 }
366 
367 static void altera_uart_release_port(struct uart_port *port)
368 {
369 	/* Nothing to release... */
370 }
371 
372 static int altera_uart_verify_port(struct uart_port *port,
373 				   struct serial_struct *ser)
374 {
375 	if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_ALTERA_UART))
376 		return -EINVAL;
377 	return 0;
378 }
379 
380 #ifdef CONFIG_CONSOLE_POLL
381 static int altera_uart_poll_get_char(struct uart_port *port)
382 {
383 	while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
384 		 ALTERA_UART_STATUS_RRDY_MSK))
385 		cpu_relax();
386 
387 	return altera_uart_readl(port, ALTERA_UART_RXDATA_REG);
388 }
389 
390 static void altera_uart_poll_put_char(struct uart_port *port, unsigned char c)
391 {
392 	while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
393 		 ALTERA_UART_STATUS_TRDY_MSK))
394 		cpu_relax();
395 
396 	altera_uart_writel(port, c, ALTERA_UART_TXDATA_REG);
397 }
398 #endif
399 
400 /*
401  *	Define the basic serial functions we support.
402  */
403 static struct uart_ops altera_uart_ops = {
404 	.tx_empty	= altera_uart_tx_empty,
405 	.get_mctrl	= altera_uart_get_mctrl,
406 	.set_mctrl	= altera_uart_set_mctrl,
407 	.start_tx	= altera_uart_start_tx,
408 	.stop_tx	= altera_uart_stop_tx,
409 	.stop_rx	= altera_uart_stop_rx,
410 	.enable_ms	= altera_uart_enable_ms,
411 	.break_ctl	= altera_uart_break_ctl,
412 	.startup	= altera_uart_startup,
413 	.shutdown	= altera_uart_shutdown,
414 	.set_termios	= altera_uart_set_termios,
415 	.type		= altera_uart_type,
416 	.request_port	= altera_uart_request_port,
417 	.release_port	= altera_uart_release_port,
418 	.config_port	= altera_uart_config_port,
419 	.verify_port	= altera_uart_verify_port,
420 #ifdef CONFIG_CONSOLE_POLL
421 	.poll_get_char	= altera_uart_poll_get_char,
422 	.poll_put_char	= altera_uart_poll_put_char,
423 #endif
424 };
425 
426 static struct altera_uart altera_uart_ports[CONFIG_SERIAL_ALTERA_UART_MAXPORTS];
427 
428 #if defined(CONFIG_SERIAL_ALTERA_UART_CONSOLE)
429 
430 static void altera_uart_console_putc(struct uart_port *port, const char c)
431 {
432 	while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
433 		 ALTERA_UART_STATUS_TRDY_MSK))
434 		cpu_relax();
435 
436 	writel(c, port->membase + ALTERA_UART_TXDATA_REG);
437 }
438 
439 static void altera_uart_console_write(struct console *co, const char *s,
440 				      unsigned int count)
441 {
442 	struct uart_port *port = &(altera_uart_ports + co->index)->port;
443 
444 	for (; count; count--, s++) {
445 		altera_uart_console_putc(port, *s);
446 		if (*s == '\n')
447 			altera_uart_console_putc(port, '\r');
448 	}
449 }
450 
451 static int __init altera_uart_console_setup(struct console *co, char *options)
452 {
453 	struct uart_port *port;
454 	int baud = CONFIG_SERIAL_ALTERA_UART_BAUDRATE;
455 	int bits = 8;
456 	int parity = 'n';
457 	int flow = 'n';
458 
459 	if (co->index < 0 || co->index >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
460 		return -EINVAL;
461 	port = &altera_uart_ports[co->index].port;
462 	if (!port->membase)
463 		return -ENODEV;
464 
465 	if (options)
466 		uart_parse_options(options, &baud, &parity, &bits, &flow);
467 
468 	return uart_set_options(port, co, baud, parity, bits, flow);
469 }
470 
471 static struct uart_driver altera_uart_driver;
472 
473 static struct console altera_uart_console = {
474 	.name	= "ttyAL",
475 	.write	= altera_uart_console_write,
476 	.device	= uart_console_device,
477 	.setup	= altera_uart_console_setup,
478 	.flags	= CON_PRINTBUFFER,
479 	.index	= -1,
480 	.data	= &altera_uart_driver,
481 };
482 
483 static int __init altera_uart_console_init(void)
484 {
485 	register_console(&altera_uart_console);
486 	return 0;
487 }
488 
489 console_initcall(altera_uart_console_init);
490 
491 #define	ALTERA_UART_CONSOLE	(&altera_uart_console)
492 
493 #else
494 
495 #define	ALTERA_UART_CONSOLE	NULL
496 
497 #endif /* CONFIG_ALTERA_UART_CONSOLE */
498 
499 /*
500  *	Define the altera_uart UART driver structure.
501  */
502 static struct uart_driver altera_uart_driver = {
503 	.owner		= THIS_MODULE,
504 	.driver_name	= DRV_NAME,
505 	.dev_name	= "ttyAL",
506 	.major		= SERIAL_ALTERA_MAJOR,
507 	.minor		= SERIAL_ALTERA_MINOR,
508 	.nr		= CONFIG_SERIAL_ALTERA_UART_MAXPORTS,
509 	.cons		= ALTERA_UART_CONSOLE,
510 };
511 
512 #ifdef CONFIG_OF
513 static int altera_uart_get_of_uartclk(struct platform_device *pdev,
514 				      struct uart_port *port)
515 {
516 	int len;
517 	const __be32 *clk;
518 
519 	clk = of_get_property(pdev->dev.of_node, "clock-frequency", &len);
520 	if (!clk || len < sizeof(__be32))
521 		return -ENODEV;
522 
523 	port->uartclk = be32_to_cpup(clk);
524 
525 	return 0;
526 }
527 #else
528 static int altera_uart_get_of_uartclk(struct platform_device *pdev,
529 				      struct uart_port *port)
530 {
531 	return -ENODEV;
532 }
533 #endif /* CONFIG_OF */
534 
535 static int altera_uart_probe(struct platform_device *pdev)
536 {
537 	struct altera_uart_platform_uart *platp = pdev->dev.platform_data;
538 	struct uart_port *port;
539 	struct resource *res_mem;
540 	struct resource *res_irq;
541 	int i = pdev->id;
542 	int ret;
543 
544 	/* if id is -1 scan for a free id and use that one */
545 	if (i == -1) {
546 		for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS; i++)
547 			if (altera_uart_ports[i].port.mapbase == 0)
548 				break;
549 	}
550 
551 	if (i < 0 || i >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
552 		return -EINVAL;
553 
554 	port = &altera_uart_ports[i].port;
555 
556 	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
557 	if (res_mem)
558 		port->mapbase = res_mem->start;
559 	else if (platp)
560 		port->mapbase = platp->mapbase;
561 	else
562 		return -EINVAL;
563 
564 	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
565 	if (res_irq)
566 		port->irq = res_irq->start;
567 	else if (platp)
568 		port->irq = platp->irq;
569 
570 	/* Check platform data first so we can override device node data */
571 	if (platp)
572 		port->uartclk = platp->uartclk;
573 	else {
574 		ret = altera_uart_get_of_uartclk(pdev, port);
575 		if (ret)
576 			return ret;
577 	}
578 
579 	port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
580 	if (!port->membase)
581 		return -ENOMEM;
582 
583 	if (platp)
584 		port->regshift = platp->bus_shift;
585 	else
586 		port->regshift = 0;
587 
588 	port->line = i;
589 	port->type = PORT_ALTERA_UART;
590 	port->iotype = SERIAL_IO_MEM;
591 	port->ops = &altera_uart_ops;
592 	port->flags = UPF_BOOT_AUTOCONF;
593 
594 	platform_set_drvdata(pdev, port);
595 
596 	uart_add_one_port(&altera_uart_driver, port);
597 
598 	return 0;
599 }
600 
601 static int altera_uart_remove(struct platform_device *pdev)
602 {
603 	struct uart_port *port = platform_get_drvdata(pdev);
604 
605 	if (port) {
606 		uart_remove_one_port(&altera_uart_driver, port);
607 		platform_set_drvdata(pdev, NULL);
608 		port->mapbase = 0;
609 	}
610 
611 	return 0;
612 }
613 
614 #ifdef CONFIG_OF
615 static struct of_device_id altera_uart_match[] = {
616 	{ .compatible = "ALTR,uart-1.0", },
617 	{},
618 };
619 MODULE_DEVICE_TABLE(of, altera_uart_match);
620 #endif /* CONFIG_OF */
621 
622 static struct platform_driver altera_uart_platform_driver = {
623 	.probe	= altera_uart_probe,
624 	.remove	= altera_uart_remove,
625 	.driver	= {
626 		.name		= DRV_NAME,
627 		.owner		= THIS_MODULE,
628 		.of_match_table	= of_match_ptr(altera_uart_match),
629 	},
630 };
631 
632 static int __init altera_uart_init(void)
633 {
634 	int rc;
635 
636 	rc = uart_register_driver(&altera_uart_driver);
637 	if (rc)
638 		return rc;
639 	rc = platform_driver_register(&altera_uart_platform_driver);
640 	if (rc) {
641 		uart_unregister_driver(&altera_uart_driver);
642 		return rc;
643 	}
644 	return 0;
645 }
646 
647 static void __exit altera_uart_exit(void)
648 {
649 	platform_driver_unregister(&altera_uart_platform_driver);
650 	uart_unregister_driver(&altera_uart_driver);
651 }
652 
653 module_init(altera_uart_init);
654 module_exit(altera_uart_exit);
655 
656 MODULE_DESCRIPTION("Altera UART driver");
657 MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
658 MODULE_LICENSE("GPL");
659 MODULE_ALIAS("platform:" DRV_NAME);
660 MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_ALTERA_MAJOR);
661