xref: /openbmc/linux/drivers/tty/serial/altera_uart.c (revision 12eb4683) 
1 /*
2  * altera_uart.c -- Altera UART driver
3  *
4  * Based on mcf.c -- Freescale ColdFire UART driver
5  *
6  * (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com>
7  * (C) Copyright 2008, Thomas Chou <thomas@wytron.com.tw>
8  * (C) Copyright 2010, Tobias Klauser <tklauser@distanz.ch>
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License as published by
12  * the Free Software Foundation; either version 2 of the License, or
13  * (at your option) any later version.
14  */
15 
16 #include <linux/kernel.h>
17 #include <linux/init.h>
18 #include <linux/timer.h>
19 #include <linux/interrupt.h>
20 #include <linux/module.h>
21 #include <linux/console.h>
22 #include <linux/tty.h>
23 #include <linux/tty_flip.h>
24 #include <linux/serial.h>
25 #include <linux/serial_core.h>
26 #include <linux/platform_device.h>
27 #include <linux/of.h>
28 #include <linux/io.h>
29 #include <linux/altera_uart.h>
30 
31 #define DRV_NAME "altera_uart"
32 #define SERIAL_ALTERA_MAJOR 204
33 #define SERIAL_ALTERA_MINOR 213
34 
35 /*
36  * Altera UART register definitions according to the Nios UART datasheet:
37  * http://www.altera.com/literature/ds/ds_nios_uart.pdf
38  */
39 
40 #define ALTERA_UART_SIZE		32
41 
42 #define ALTERA_UART_RXDATA_REG		0
43 #define ALTERA_UART_TXDATA_REG		4
44 #define ALTERA_UART_STATUS_REG		8
45 #define ALTERA_UART_CONTROL_REG		12
46 #define ALTERA_UART_DIVISOR_REG		16
47 #define ALTERA_UART_EOP_REG		20
48 
49 #define ALTERA_UART_STATUS_PE_MSK	0x0001	/* parity error */
50 #define ALTERA_UART_STATUS_FE_MSK	0x0002	/* framing error */
51 #define ALTERA_UART_STATUS_BRK_MSK	0x0004	/* break */
52 #define ALTERA_UART_STATUS_ROE_MSK	0x0008	/* RX overrun error */
53 #define ALTERA_UART_STATUS_TOE_MSK	0x0010	/* TX overrun error */
54 #define ALTERA_UART_STATUS_TMT_MSK	0x0020	/* TX shift register state */
55 #define ALTERA_UART_STATUS_TRDY_MSK	0x0040	/* TX ready */
56 #define ALTERA_UART_STATUS_RRDY_MSK	0x0080	/* RX ready */
57 #define ALTERA_UART_STATUS_E_MSK	0x0100	/* exception condition */
58 #define ALTERA_UART_STATUS_DCTS_MSK	0x0400	/* CTS logic-level change */
59 #define ALTERA_UART_STATUS_CTS_MSK	0x0800	/* CTS logic state */
60 #define ALTERA_UART_STATUS_EOP_MSK	0x1000	/* EOP written/read */
61 
62 						/* Enable interrupt on... */
63 #define ALTERA_UART_CONTROL_PE_MSK	0x0001	/* ...parity error */
64 #define ALTERA_UART_CONTROL_FE_MSK	0x0002	/* ...framing error */
65 #define ALTERA_UART_CONTROL_BRK_MSK	0x0004	/* ...break */
66 #define ALTERA_UART_CONTROL_ROE_MSK	0x0008	/* ...RX overrun */
67 #define ALTERA_UART_CONTROL_TOE_MSK	0x0010	/* ...TX overrun */
68 #define ALTERA_UART_CONTROL_TMT_MSK	0x0020	/* ...TX shift register empty */
69 #define ALTERA_UART_CONTROL_TRDY_MSK	0x0040	/* ...TX ready */
70 #define ALTERA_UART_CONTROL_RRDY_MSK	0x0080	/* ...RX ready */
71 #define ALTERA_UART_CONTROL_E_MSK	0x0100	/* ...exception*/
72 
73 #define ALTERA_UART_CONTROL_TRBK_MSK	0x0200	/* TX break */
74 #define ALTERA_UART_CONTROL_DCTS_MSK	0x0400	/* Interrupt on CTS change */
75 #define ALTERA_UART_CONTROL_RTS_MSK	0x0800	/* RTS signal */
76 #define ALTERA_UART_CONTROL_EOP_MSK	0x1000	/* Interrupt on EOP */
77 
78 /*
79  * Local per-uart structure.
80  */
81 struct altera_uart {
82 	struct uart_port port;
83 	struct timer_list tmr;
84 	unsigned int sigs;	/* Local copy of line sigs */
85 	unsigned short imr;	/* Local IMR mirror */
86 };
87 
88 static u32 altera_uart_readl(struct uart_port *port, int reg)
89 {
90 	return readl(port->membase + (reg << port->regshift));
91 }
92 
93 static void altera_uart_writel(struct uart_port *port, u32 dat, int reg)
94 {
95 	writel(dat, port->membase + (reg << port->regshift));
96 }
97 
98 static unsigned int altera_uart_tx_empty(struct uart_port *port)
99 {
100 	return (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
101 		ALTERA_UART_STATUS_TMT_MSK) ? TIOCSER_TEMT : 0;
102 }
103 
104 static unsigned int altera_uart_get_mctrl(struct uart_port *port)
105 {
106 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
107 	unsigned int sigs;
108 
109 	sigs = (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
110 	     ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0;
111 	sigs |= (pp->sigs & TIOCM_RTS);
112 
113 	return sigs;
114 }
115 
116 static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs)
117 {
118 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
119 
120 	pp->sigs = sigs;
121 	if (sigs & TIOCM_RTS)
122 		pp->imr |= ALTERA_UART_CONTROL_RTS_MSK;
123 	else
124 		pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK;
125 	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
126 }
127 
128 static void altera_uart_start_tx(struct uart_port *port)
129 {
130 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
131 
132 	pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK;
133 	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
134 }
135 
136 static void altera_uart_stop_tx(struct uart_port *port)
137 {
138 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
139 
140 	pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
141 	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
142 }
143 
144 static void altera_uart_stop_rx(struct uart_port *port)
145 {
146 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
147 
148 	pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK;
149 	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
150 }
151 
152 static void altera_uart_break_ctl(struct uart_port *port, int break_state)
153 {
154 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
155 	unsigned long flags;
156 
157 	spin_lock_irqsave(&port->lock, flags);
158 	if (break_state == -1)
159 		pp->imr |= ALTERA_UART_CONTROL_TRBK_MSK;
160 	else
161 		pp->imr &= ~ALTERA_UART_CONTROL_TRBK_MSK;
162 	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
163 	spin_unlock_irqrestore(&port->lock, flags);
164 }
165 
166 static void altera_uart_enable_ms(struct uart_port *port)
167 {
168 }
169 
170 static void altera_uart_set_termios(struct uart_port *port,
171 				    struct ktermios *termios,
172 				    struct ktermios *old)
173 {
174 	unsigned long flags;
175 	unsigned int baud, baudclk;
176 
177 	baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
178 	baudclk = port->uartclk / baud;
179 
180 	if (old)
181 		tty_termios_copy_hw(termios, old);
182 	tty_termios_encode_baud_rate(termios, baud, baud);
183 
184 	spin_lock_irqsave(&port->lock, flags);
185 	uart_update_timeout(port, termios->c_cflag, baud);
186 	altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG);
187 	spin_unlock_irqrestore(&port->lock, flags);
188 }
189 
190 static void altera_uart_rx_chars(struct altera_uart *pp)
191 {
192 	struct uart_port *port = &pp->port;
193 	unsigned char ch, flag;
194 	unsigned short status;
195 
196 	while ((status = altera_uart_readl(port, ALTERA_UART_STATUS_REG)) &
197 	       ALTERA_UART_STATUS_RRDY_MSK) {
198 		ch = altera_uart_readl(port, ALTERA_UART_RXDATA_REG);
199 		flag = TTY_NORMAL;
200 		port->icount.rx++;
201 
202 		if (status & ALTERA_UART_STATUS_E_MSK) {
203 			altera_uart_writel(port, status,
204 					   ALTERA_UART_STATUS_REG);
205 
206 			if (status & ALTERA_UART_STATUS_BRK_MSK) {
207 				port->icount.brk++;
208 				if (uart_handle_break(port))
209 					continue;
210 			} else if (status & ALTERA_UART_STATUS_PE_MSK) {
211 				port->icount.parity++;
212 			} else if (status & ALTERA_UART_STATUS_ROE_MSK) {
213 				port->icount.overrun++;
214 			} else if (status & ALTERA_UART_STATUS_FE_MSK) {
215 				port->icount.frame++;
216 			}
217 
218 			status &= port->read_status_mask;
219 
220 			if (status & ALTERA_UART_STATUS_BRK_MSK)
221 				flag = TTY_BREAK;
222 			else if (status & ALTERA_UART_STATUS_PE_MSK)
223 				flag = TTY_PARITY;
224 			else if (status & ALTERA_UART_STATUS_FE_MSK)
225 				flag = TTY_FRAME;
226 		}
227 
228 		if (uart_handle_sysrq_char(port, ch))
229 			continue;
230 		uart_insert_char(port, status, ALTERA_UART_STATUS_ROE_MSK, ch,
231 				 flag);
232 	}
233 
234 	spin_unlock(&port->lock);
235 	tty_flip_buffer_push(&port->state->port);
236 	spin_lock(&port->lock);
237 }
238 
239 static void altera_uart_tx_chars(struct altera_uart *pp)
240 {
241 	struct uart_port *port = &pp->port;
242 	struct circ_buf *xmit = &port->state->xmit;
243 
244 	if (port->x_char) {
245 		/* Send special char - probably flow control */
246 		altera_uart_writel(port, port->x_char, ALTERA_UART_TXDATA_REG);
247 		port->x_char = 0;
248 		port->icount.tx++;
249 		return;
250 	}
251 
252 	while (altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
253 	       ALTERA_UART_STATUS_TRDY_MSK) {
254 		if (xmit->head == xmit->tail)
255 			break;
256 		altera_uart_writel(port, xmit->buf[xmit->tail],
257 		       ALTERA_UART_TXDATA_REG);
258 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
259 		port->icount.tx++;
260 	}
261 
262 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
263 		uart_write_wakeup(port);
264 
265 	if (xmit->head == xmit->tail) {
266 		pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
267 		altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
268 	}
269 }
270 
271 static irqreturn_t altera_uart_interrupt(int irq, void *data)
272 {
273 	struct uart_port *port = data;
274 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
275 	unsigned int isr;
276 
277 	isr = altera_uart_readl(port, ALTERA_UART_STATUS_REG) & pp->imr;
278 
279 	spin_lock(&port->lock);
280 	if (isr & ALTERA_UART_STATUS_RRDY_MSK)
281 		altera_uart_rx_chars(pp);
282 	if (isr & ALTERA_UART_STATUS_TRDY_MSK)
283 		altera_uart_tx_chars(pp);
284 	spin_unlock(&port->lock);
285 
286 	return IRQ_RETVAL(isr);
287 }
288 
289 static void altera_uart_timer(unsigned long data)
290 {
291 	struct uart_port *port = (void *)data;
292 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
293 
294 	altera_uart_interrupt(0, port);
295 	mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
296 }
297 
298 static void altera_uart_config_port(struct uart_port *port, int flags)
299 {
300 	port->type = PORT_ALTERA_UART;
301 
302 	/* Clear mask, so no surprise interrupts. */
303 	altera_uart_writel(port, 0, ALTERA_UART_CONTROL_REG);
304 	/* Clear status register */
305 	altera_uart_writel(port, 0, ALTERA_UART_STATUS_REG);
306 }
307 
308 static int altera_uart_startup(struct uart_port *port)
309 {
310 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
311 	unsigned long flags;
312 	int ret;
313 
314 	if (!port->irq) {
315 		setup_timer(&pp->tmr, altera_uart_timer, (unsigned long)port);
316 		mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
317 		return 0;
318 	}
319 
320 	ret = request_irq(port->irq, altera_uart_interrupt, 0,
321 			DRV_NAME, port);
322 	if (ret) {
323 		pr_err(DRV_NAME ": unable to attach Altera UART %d "
324 		       "interrupt vector=%d\n", port->line, port->irq);
325 		return ret;
326 	}
327 
328 	spin_lock_irqsave(&port->lock, flags);
329 
330 	/* Enable RX interrupts now */
331 	pp->imr = ALTERA_UART_CONTROL_RRDY_MSK;
332 	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
333 
334 	spin_unlock_irqrestore(&port->lock, flags);
335 
336 	return 0;
337 }
338 
339 static void altera_uart_shutdown(struct uart_port *port)
340 {
341 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
342 	unsigned long flags;
343 
344 	spin_lock_irqsave(&port->lock, flags);
345 
346 	/* Disable all interrupts now */
347 	pp->imr = 0;
348 	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
349 
350 	spin_unlock_irqrestore(&port->lock, flags);
351 
352 	if (port->irq)
353 		free_irq(port->irq, port);
354 	else
355 		del_timer_sync(&pp->tmr);
356 }
357 
358 static const char *altera_uart_type(struct uart_port *port)
359 {
360 	return (port->type == PORT_ALTERA_UART) ? "Altera UART" : NULL;
361 }
362 
363 static int altera_uart_request_port(struct uart_port *port)
364 {
365 	/* UARTs always present */
366 	return 0;
367 }
368 
369 static void altera_uart_release_port(struct uart_port *port)
370 {
371 	/* Nothing to release... */
372 }
373 
374 static int altera_uart_verify_port(struct uart_port *port,
375 				   struct serial_struct *ser)
376 {
377 	if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_ALTERA_UART))
378 		return -EINVAL;
379 	return 0;
380 }
381 
382 #ifdef CONFIG_CONSOLE_POLL
383 static int altera_uart_poll_get_char(struct uart_port *port)
384 {
385 	while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
386 		 ALTERA_UART_STATUS_RRDY_MSK))
387 		cpu_relax();
388 
389 	return altera_uart_readl(port, ALTERA_UART_RXDATA_REG);
390 }
391 
392 static void altera_uart_poll_put_char(struct uart_port *port, unsigned char c)
393 {
394 	while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
395 		 ALTERA_UART_STATUS_TRDY_MSK))
396 		cpu_relax();
397 
398 	altera_uart_writel(port, c, ALTERA_UART_TXDATA_REG);
399 }
400 #endif
401 
402 /*
403  *	Define the basic serial functions we support.
404  */
405 static struct uart_ops altera_uart_ops = {
406 	.tx_empty	= altera_uart_tx_empty,
407 	.get_mctrl	= altera_uart_get_mctrl,
408 	.set_mctrl	= altera_uart_set_mctrl,
409 	.start_tx	= altera_uart_start_tx,
410 	.stop_tx	= altera_uart_stop_tx,
411 	.stop_rx	= altera_uart_stop_rx,
412 	.enable_ms	= altera_uart_enable_ms,
413 	.break_ctl	= altera_uart_break_ctl,
414 	.startup	= altera_uart_startup,
415 	.shutdown	= altera_uart_shutdown,
416 	.set_termios	= altera_uart_set_termios,
417 	.type		= altera_uart_type,
418 	.request_port	= altera_uart_request_port,
419 	.release_port	= altera_uart_release_port,
420 	.config_port	= altera_uart_config_port,
421 	.verify_port	= altera_uart_verify_port,
422 #ifdef CONFIG_CONSOLE_POLL
423 	.poll_get_char	= altera_uart_poll_get_char,
424 	.poll_put_char	= altera_uart_poll_put_char,
425 #endif
426 };
427 
428 static struct altera_uart altera_uart_ports[CONFIG_SERIAL_ALTERA_UART_MAXPORTS];
429 
430 #if defined(CONFIG_SERIAL_ALTERA_UART_CONSOLE)
431 
432 static void altera_uart_console_putc(struct uart_port *port, const char c)
433 {
434 	while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) &
435 		 ALTERA_UART_STATUS_TRDY_MSK))
436 		cpu_relax();
437 
438 	writel(c, port->membase + ALTERA_UART_TXDATA_REG);
439 }
440 
441 static void altera_uart_console_write(struct console *co, const char *s,
442 				      unsigned int count)
443 {
444 	struct uart_port *port = &(altera_uart_ports + co->index)->port;
445 
446 	for (; count; count--, s++) {
447 		altera_uart_console_putc(port, *s);
448 		if (*s == '\n')
449 			altera_uart_console_putc(port, '\r');
450 	}
451 }
452 
453 static int __init altera_uart_console_setup(struct console *co, char *options)
454 {
455 	struct uart_port *port;
456 	int baud = CONFIG_SERIAL_ALTERA_UART_BAUDRATE;
457 	int bits = 8;
458 	int parity = 'n';
459 	int flow = 'n';
460 
461 	if (co->index < 0 || co->index >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
462 		return -EINVAL;
463 	port = &altera_uart_ports[co->index].port;
464 	if (!port->membase)
465 		return -ENODEV;
466 
467 	if (options)
468 		uart_parse_options(options, &baud, &parity, &bits, &flow);
469 
470 	return uart_set_options(port, co, baud, parity, bits, flow);
471 }
472 
473 static struct uart_driver altera_uart_driver;
474 
475 static struct console altera_uart_console = {
476 	.name	= "ttyAL",
477 	.write	= altera_uart_console_write,
478 	.device	= uart_console_device,
479 	.setup	= altera_uart_console_setup,
480 	.flags	= CON_PRINTBUFFER,
481 	.index	= -1,
482 	.data	= &altera_uart_driver,
483 };
484 
485 static int __init altera_uart_console_init(void)
486 {
487 	register_console(&altera_uart_console);
488 	return 0;
489 }
490 
491 console_initcall(altera_uart_console_init);
492 
493 #define	ALTERA_UART_CONSOLE	(&altera_uart_console)
494 
495 #else
496 
497 #define	ALTERA_UART_CONSOLE	NULL
498 
499 #endif /* CONFIG_ALTERA_UART_CONSOLE */
500 
501 /*
502  *	Define the altera_uart UART driver structure.
503  */
504 static struct uart_driver altera_uart_driver = {
505 	.owner		= THIS_MODULE,
506 	.driver_name	= DRV_NAME,
507 	.dev_name	= "ttyAL",
508 	.major		= SERIAL_ALTERA_MAJOR,
509 	.minor		= SERIAL_ALTERA_MINOR,
510 	.nr		= CONFIG_SERIAL_ALTERA_UART_MAXPORTS,
511 	.cons		= ALTERA_UART_CONSOLE,
512 };
513 
514 #ifdef CONFIG_OF
515 static int altera_uart_get_of_uartclk(struct platform_device *pdev,
516 				      struct uart_port *port)
517 {
518 	int len;
519 	const __be32 *clk;
520 
521 	clk = of_get_property(pdev->dev.of_node, "clock-frequency", &len);
522 	if (!clk || len < sizeof(__be32))
523 		return -ENODEV;
524 
525 	port->uartclk = be32_to_cpup(clk);
526 
527 	return 0;
528 }
529 #else
530 static int altera_uart_get_of_uartclk(struct platform_device *pdev,
531 				      struct uart_port *port)
532 {
533 	return -ENODEV;
534 }
535 #endif /* CONFIG_OF */
536 
537 static int altera_uart_probe(struct platform_device *pdev)
538 {
539 	struct altera_uart_platform_uart *platp = dev_get_platdata(&pdev->dev);
540 	struct uart_port *port;
541 	struct resource *res_mem;
542 	struct resource *res_irq;
543 	int i = pdev->id;
544 	int ret;
545 
546 	/* if id is -1 scan for a free id and use that one */
547 	if (i == -1) {
548 		for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS; i++)
549 			if (altera_uart_ports[i].port.mapbase == 0)
550 				break;
551 	}
552 
553 	if (i < 0 || i >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
554 		return -EINVAL;
555 
556 	port = &altera_uart_ports[i].port;
557 
558 	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
559 	if (res_mem)
560 		port->mapbase = res_mem->start;
561 	else if (platp)
562 		port->mapbase = platp->mapbase;
563 	else
564 		return -EINVAL;
565 
566 	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
567 	if (res_irq)
568 		port->irq = res_irq->start;
569 	else if (platp)
570 		port->irq = platp->irq;
571 
572 	/* Check platform data first so we can override device node data */
573 	if (platp)
574 		port->uartclk = platp->uartclk;
575 	else {
576 		ret = altera_uart_get_of_uartclk(pdev, port);
577 		if (ret)
578 			return ret;
579 	}
580 
581 	port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
582 	if (!port->membase)
583 		return -ENOMEM;
584 
585 	if (platp)
586 		port->regshift = platp->bus_shift;
587 	else
588 		port->regshift = 0;
589 
590 	port->line = i;
591 	port->type = PORT_ALTERA_UART;
592 	port->iotype = SERIAL_IO_MEM;
593 	port->ops = &altera_uart_ops;
594 	port->flags = UPF_BOOT_AUTOCONF;
595 
596 	platform_set_drvdata(pdev, port);
597 
598 	uart_add_one_port(&altera_uart_driver, port);
599 
600 	return 0;
601 }
602 
603 static int altera_uart_remove(struct platform_device *pdev)
604 {
605 	struct uart_port *port = platform_get_drvdata(pdev);
606 
607 	if (port) {
608 		uart_remove_one_port(&altera_uart_driver, port);
609 		port->mapbase = 0;
610 	}
611 
612 	return 0;
613 }
614 
615 #ifdef CONFIG_OF
616 static struct of_device_id altera_uart_match[] = {
617 	{ .compatible = "ALTR,uart-1.0", },
618 	{ .compatible = "altr,uart-1.0", },
619 	{},
620 };
621 MODULE_DEVICE_TABLE(of, altera_uart_match);
622 #endif /* CONFIG_OF */
623 
624 static struct platform_driver altera_uart_platform_driver = {
625 	.probe	= altera_uart_probe,
626 	.remove	= altera_uart_remove,
627 	.driver	= {
628 		.name		= DRV_NAME,
629 		.owner		= THIS_MODULE,
630 		.of_match_table	= of_match_ptr(altera_uart_match),
631 	},
632 };
633 
634 static int __init altera_uart_init(void)
635 {
636 	int rc;
637 
638 	rc = uart_register_driver(&altera_uart_driver);
639 	if (rc)
640 		return rc;
641 	rc = platform_driver_register(&altera_uart_platform_driver);
642 	if (rc)
643 		uart_unregister_driver(&altera_uart_driver);
644 	return rc;
645 }
646 
647 static void __exit altera_uart_exit(void)
648 {
649 	platform_driver_unregister(&altera_uart_platform_driver);
650 	uart_unregister_driver(&altera_uart_driver);
651 }
652 
653 module_init(altera_uart_init);
654 module_exit(altera_uart_exit);
655 
656 MODULE_DESCRIPTION("Altera UART driver");
657 MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
658 MODULE_LICENSE("GPL");
659 MODULE_ALIAS("platform:" DRV_NAME);
660 MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_ALTERA_MAJOR);
661