1 // SPDX-License-Identifier: (GPL-2.0 OR MPL-1.1) 2 /*====================================================================== 3 4 A driver for PCMCIA serial devices 5 6 serial_cs.c 1.134 2002/05/04 05:48:53 7 8 The contents of this file are subject to the Mozilla Public 9 License Version 1.1 (the "License"); you may not use this file 10 except in compliance with the License. You may obtain a copy of 11 the License at http://www.mozilla.org/MPL/ 12 13 Software distributed under the License is distributed on an "AS 14 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or 15 implied. See the License for the specific language governing 16 rights and limitations under the License. 17 18 The initial developer of the original code is David A. Hinds 19 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds 20 are Copyright (C) 1999 David A. Hinds. All Rights Reserved. 21 22 Alternatively, the contents of this file may be used under the 23 terms of the GNU General Public License version 2 (the "GPL"), in which 24 case the provisions of the GPL are applicable instead of the 25 above. If you wish to allow the use of your version of this file 26 only under the terms of the GPL and not to allow others to use 27 your version of this file under the MPL, indicate your decision 28 by deleting the provisions above and replace them with the notice 29 and other provisions required by the GPL. If you do not delete 30 the provisions above, a recipient may use your version of this 31 file under either the MPL or the GPL. 32 33 ======================================================================*/ 34 35 #include <linux/module.h> 36 #include <linux/moduleparam.h> 37 #include <linux/kernel.h> 38 #include <linux/ptrace.h> 39 #include <linux/slab.h> 40 #include <linux/string.h> 41 #include <linux/timer.h> 42 #include <linux/serial_core.h> 43 #include <linux/delay.h> 44 #include <linux/major.h> 45 #include <asm/io.h> 46 47 #include <pcmcia/cistpl.h> 48 #include <pcmcia/ciscode.h> 49 #include <pcmcia/ds.h> 50 #include <pcmcia/cisreg.h> 51 52 #include "8250.h" 53 54 55 /*====================================================================*/ 56 57 /* Parameters that can be set with 'insmod' */ 58 59 /* Enable the speaker? */ 60 static int do_sound = 1; 61 /* Skip strict UART tests? */ 62 static int buggy_uart; 63 64 module_param(do_sound, int, 0444); 65 module_param(buggy_uart, int, 0444); 66 67 /*====================================================================*/ 68 69 /* Table of multi-port card ID's */ 70 71 struct serial_quirk { 72 unsigned int manfid; 73 unsigned int prodid; 74 int multi; /* 1 = multifunction, > 1 = # ports */ 75 void (*config)(struct pcmcia_device *); 76 void (*setup)(struct pcmcia_device *, struct uart_8250_port *); 77 void (*wakeup)(struct pcmcia_device *); 78 int (*post)(struct pcmcia_device *); 79 }; 80 81 struct serial_info { 82 struct pcmcia_device *p_dev; 83 int ndev; 84 int multi; 85 int slave; 86 int manfid; 87 int prodid; 88 int c950ctrl; 89 int line[4]; 90 const struct serial_quirk *quirk; 91 }; 92 93 struct serial_cfg_mem { 94 tuple_t tuple; 95 cisparse_t parse; 96 u_char buf[256]; 97 }; 98 99 /* 100 * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6" 101 * manfid 0x0160, 0x0104 102 * This card appears to have a 14.7456MHz clock. 103 */ 104 /* Generic Modem: MD55x (GPRS/EDGE) have 105 * Elan VPU16551 UART with 14.7456MHz oscillator 106 * manfid 0x015D, 0x4C45 107 */ 108 static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_8250_port *uart) 109 { 110 uart->port.uartclk = 14745600; 111 } 112 113 static int quirk_post_ibm(struct pcmcia_device *link) 114 { 115 u8 val; 116 int ret; 117 118 ret = pcmcia_read_config_byte(link, 0x800, &val); 119 if (ret) 120 goto failed; 121 122 ret = pcmcia_write_config_byte(link, 0x800, val | 1); 123 if (ret) 124 goto failed; 125 return 0; 126 127 failed: 128 return -ENODEV; 129 } 130 131 /* 132 * Nokia cards are not really multiport cards. Shouldn't this 133 * be handled by setting the quirk entry .multi = 0 | 1 ? 134 */ 135 static void quirk_config_nokia(struct pcmcia_device *link) 136 { 137 struct serial_info *info = link->priv; 138 139 if (info->multi > 1) 140 info->multi = 1; 141 } 142 143 static void quirk_wakeup_oxsemi(struct pcmcia_device *link) 144 { 145 struct serial_info *info = link->priv; 146 147 if (info->c950ctrl) 148 outb(12, info->c950ctrl + 1); 149 } 150 151 /* request_region? oxsemi branch does no request_region too... */ 152 /* 153 * This sequence is needed to properly initialize MC45 attached to OXCF950. 154 * I tried decreasing these msleep()s, but it worked properly (survived 155 * 1000 stop/start operations) with these timeouts (or bigger). 156 */ 157 static void quirk_wakeup_possio_gcc(struct pcmcia_device *link) 158 { 159 struct serial_info *info = link->priv; 160 unsigned int ctrl = info->c950ctrl; 161 162 outb(0xA, ctrl + 1); 163 msleep(100); 164 outb(0xE, ctrl + 1); 165 msleep(300); 166 outb(0xC, ctrl + 1); 167 msleep(100); 168 outb(0xE, ctrl + 1); 169 msleep(200); 170 outb(0xF, ctrl + 1); 171 msleep(100); 172 outb(0xE, ctrl + 1); 173 msleep(100); 174 outb(0xC, ctrl + 1); 175 } 176 177 /* 178 * Socket Dual IO: this enables irq's for second port 179 */ 180 static void quirk_config_socket(struct pcmcia_device *link) 181 { 182 struct serial_info *info = link->priv; 183 184 if (info->multi) 185 link->config_flags |= CONF_ENABLE_ESR; 186 } 187 188 static const struct serial_quirk quirks[] = { 189 { 190 .manfid = 0x0160, 191 .prodid = 0x0104, 192 .multi = -1, 193 .setup = quirk_setup_brainboxes_0104, 194 }, { 195 .manfid = 0x015D, 196 .prodid = 0x4C45, 197 .multi = -1, 198 .setup = quirk_setup_brainboxes_0104, 199 }, { 200 .manfid = MANFID_IBM, 201 .prodid = ~0, 202 .multi = -1, 203 .post = quirk_post_ibm, 204 }, { 205 .manfid = MANFID_INTEL, 206 .prodid = PRODID_INTEL_DUAL_RS232, 207 .multi = 2, 208 }, { 209 .manfid = MANFID_NATINST, 210 .prodid = PRODID_NATINST_QUAD_RS232, 211 .multi = 4, 212 }, { 213 .manfid = MANFID_NOKIA, 214 .prodid = ~0, 215 .multi = -1, 216 .config = quirk_config_nokia, 217 }, { 218 .manfid = MANFID_OMEGA, 219 .prodid = PRODID_OMEGA_QSP_100, 220 .multi = 4, 221 }, { 222 .manfid = MANFID_OXSEMI, 223 .prodid = ~0, 224 .multi = -1, 225 .wakeup = quirk_wakeup_oxsemi, 226 }, { 227 .manfid = MANFID_POSSIO, 228 .prodid = PRODID_POSSIO_GCC, 229 .multi = -1, 230 .wakeup = quirk_wakeup_possio_gcc, 231 }, { 232 .manfid = MANFID_QUATECH, 233 .prodid = PRODID_QUATECH_DUAL_RS232, 234 .multi = 2, 235 }, { 236 .manfid = MANFID_QUATECH, 237 .prodid = PRODID_QUATECH_DUAL_RS232_D1, 238 .multi = 2, 239 }, { 240 .manfid = MANFID_QUATECH, 241 .prodid = PRODID_QUATECH_DUAL_RS232_G, 242 .multi = 2, 243 }, { 244 .manfid = MANFID_QUATECH, 245 .prodid = PRODID_QUATECH_QUAD_RS232, 246 .multi = 4, 247 }, { 248 .manfid = MANFID_SOCKET, 249 .prodid = PRODID_SOCKET_DUAL_RS232, 250 .multi = 2, 251 .config = quirk_config_socket, 252 }, { 253 .manfid = MANFID_SOCKET, 254 .prodid = ~0, 255 .multi = -1, 256 .config = quirk_config_socket, 257 } 258 }; 259 260 261 static int serial_config(struct pcmcia_device *link); 262 263 264 static void serial_remove(struct pcmcia_device *link) 265 { 266 struct serial_info *info = link->priv; 267 int i; 268 269 dev_dbg(&link->dev, "serial_release\n"); 270 271 /* 272 * Recheck to see if the device is still configured. 273 */ 274 for (i = 0; i < info->ndev; i++) 275 serial8250_unregister_port(info->line[i]); 276 277 if (!info->slave) 278 pcmcia_disable_device(link); 279 } 280 281 static int serial_suspend(struct pcmcia_device *link) 282 { 283 struct serial_info *info = link->priv; 284 int i; 285 286 for (i = 0; i < info->ndev; i++) 287 serial8250_suspend_port(info->line[i]); 288 289 return 0; 290 } 291 292 static int serial_resume(struct pcmcia_device *link) 293 { 294 struct serial_info *info = link->priv; 295 int i; 296 297 for (i = 0; i < info->ndev; i++) 298 serial8250_resume_port(info->line[i]); 299 300 if (info->quirk && info->quirk->wakeup) 301 info->quirk->wakeup(link); 302 303 return 0; 304 } 305 306 static int serial_probe(struct pcmcia_device *link) 307 { 308 struct serial_info *info; 309 int ret; 310 311 dev_dbg(&link->dev, "serial_attach()\n"); 312 313 /* Create new serial device */ 314 info = kzalloc(sizeof(*info), GFP_KERNEL); 315 if (!info) 316 return -ENOMEM; 317 info->p_dev = link; 318 link->priv = info; 319 320 link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; 321 if (do_sound) 322 link->config_flags |= CONF_ENABLE_SPKR; 323 324 ret = serial_config(link); 325 if (ret) 326 goto free_info; 327 328 return 0; 329 330 free_info: 331 kfree(info); 332 return ret; 333 } 334 335 static void serial_detach(struct pcmcia_device *link) 336 { 337 struct serial_info *info = link->priv; 338 339 dev_dbg(&link->dev, "serial_detach\n"); 340 341 /* 342 * Ensure that the ports have been released. 343 */ 344 serial_remove(link); 345 346 /* free bits */ 347 kfree(info); 348 } 349 350 /*====================================================================*/ 351 352 static int setup_serial(struct pcmcia_device *handle, struct serial_info *info, 353 unsigned int iobase, int irq) 354 { 355 struct uart_8250_port uart; 356 int line; 357 358 memset(&uart, 0, sizeof(uart)); 359 uart.port.iobase = iobase; 360 uart.port.irq = irq; 361 uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; 362 uart.port.uartclk = 1843200; 363 uart.port.dev = &handle->dev; 364 if (buggy_uart) 365 uart.port.flags |= UPF_BUGGY_UART; 366 367 if (info->quirk && info->quirk->setup) 368 info->quirk->setup(handle, &uart); 369 370 line = serial8250_register_8250_port(&uart); 371 if (line < 0) { 372 pr_err("serial_cs: serial8250_register_8250_port() at 0x%04lx, irq %d failed\n", 373 (unsigned long)iobase, irq); 374 return -EINVAL; 375 } 376 377 info->line[info->ndev] = line; 378 info->ndev++; 379 380 return 0; 381 } 382 383 /*====================================================================*/ 384 385 static int pfc_config(struct pcmcia_device *p_dev) 386 { 387 unsigned int port = 0; 388 struct serial_info *info = p_dev->priv; 389 390 if ((p_dev->resource[1]->end != 0) && 391 (resource_size(p_dev->resource[1]) == 8)) { 392 port = p_dev->resource[1]->start; 393 info->slave = 1; 394 } else if ((info->manfid == MANFID_OSITECH) && 395 (resource_size(p_dev->resource[0]) == 0x40)) { 396 port = p_dev->resource[0]->start + 0x28; 397 info->slave = 1; 398 } 399 if (info->slave) 400 return setup_serial(p_dev, info, port, p_dev->irq); 401 402 dev_warn(&p_dev->dev, "no usable port range found, giving up\n"); 403 return -ENODEV; 404 } 405 406 static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data) 407 { 408 static const int size_table[2] = { 8, 16 }; 409 int *try = priv_data; 410 411 if (p_dev->resource[0]->start == 0) 412 return -ENODEV; 413 414 if ((*try & 0x1) == 0) 415 p_dev->io_lines = 16; 416 417 if (p_dev->resource[0]->end != size_table[(*try >> 1)]) 418 return -ENODEV; 419 420 p_dev->resource[0]->end = 8; 421 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 422 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; 423 424 return pcmcia_request_io(p_dev); 425 } 426 427 static int simple_config_check_notpicky(struct pcmcia_device *p_dev, 428 void *priv_data) 429 { 430 static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; 431 int j; 432 433 if (p_dev->io_lines > 3) 434 return -ENODEV; 435 436 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 437 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; 438 p_dev->resource[0]->end = 8; 439 440 for (j = 0; j < 5; j++) { 441 p_dev->resource[0]->start = base[j]; 442 p_dev->io_lines = base[j] ? 16 : 3; 443 if (!pcmcia_request_io(p_dev)) 444 return 0; 445 } 446 return -ENODEV; 447 } 448 449 static int simple_config(struct pcmcia_device *link) 450 { 451 struct serial_info *info = link->priv; 452 int ret, try; 453 454 /* 455 * First pass: look for a config entry that looks normal. 456 * Two tries: without IO aliases, then with aliases. 457 */ 458 link->config_flags |= CONF_AUTO_SET_VPP; 459 for (try = 0; try < 4; try++) 460 if (!pcmcia_loop_config(link, simple_config_check, &try)) 461 goto found_port; 462 463 /* 464 * Second pass: try to find an entry that isn't picky about 465 * its base address, then try to grab any standard serial port 466 * address, and finally try to get any free port. 467 */ 468 ret = pcmcia_loop_config(link, simple_config_check_notpicky, NULL); 469 if (ret) { 470 dev_warn(&link->dev, "no usable port range found, giving up\n"); 471 return ret; 472 } 473 474 found_port: 475 if (info->multi && (info->manfid == MANFID_3COM)) 476 link->config_index &= ~(0x08); 477 478 /* 479 * Apply any configuration quirks. 480 */ 481 if (info->quirk && info->quirk->config) 482 info->quirk->config(link); 483 484 ret = pcmcia_enable_device(link); 485 if (ret != 0) 486 return ret; 487 return setup_serial(link, info, link->resource[0]->start, link->irq); 488 } 489 490 static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data) 491 { 492 int *multi = priv_data; 493 494 if (p_dev->resource[1]->end) 495 return -EINVAL; 496 497 /* 498 * The quad port cards have bad CIS's, so just look for a 499 * window larger than 8 ports and assume it will be right. 500 */ 501 if (p_dev->resource[0]->end <= 8) 502 return -EINVAL; 503 504 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 505 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; 506 p_dev->resource[0]->end = *multi * 8; 507 508 if (pcmcia_request_io(p_dev)) 509 return -ENODEV; 510 return 0; 511 } 512 513 static int multi_config_check_notpicky(struct pcmcia_device *p_dev, 514 void *priv_data) 515 { 516 int *base2 = priv_data; 517 518 if (!p_dev->resource[0]->end || !p_dev->resource[1]->end || 519 p_dev->resource[0]->start + 8 != p_dev->resource[1]->start) 520 return -ENODEV; 521 522 p_dev->resource[0]->end = p_dev->resource[1]->end = 8; 523 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 524 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; 525 526 if (pcmcia_request_io(p_dev)) 527 return -ENODEV; 528 529 *base2 = p_dev->resource[0]->start + 8; 530 return 0; 531 } 532 533 static int multi_config(struct pcmcia_device *link) 534 { 535 struct serial_info *info = link->priv; 536 int i, base2 = 0; 537 538 /* First, look for a generic full-sized window */ 539 if (!pcmcia_loop_config(link, multi_config_check, &info->multi)) 540 base2 = link->resource[0]->start + 8; 541 else { 542 /* If that didn't work, look for two windows */ 543 info->multi = 2; 544 if (pcmcia_loop_config(link, multi_config_check_notpicky, 545 &base2)) { 546 dev_warn(&link->dev, 547 "no usable port range found, giving up\n"); 548 return -ENODEV; 549 } 550 } 551 552 if (!link->irq) 553 dev_warn(&link->dev, "no usable IRQ found, continuing...\n"); 554 555 /* 556 * Apply any configuration quirks. 557 */ 558 if (info->quirk && info->quirk->config) 559 info->quirk->config(link); 560 561 i = pcmcia_enable_device(link); 562 if (i != 0) 563 return -ENODEV; 564 565 /* The Oxford Semiconductor OXCF950 cards are in fact single-port: 566 * 8 registers are for the UART, the others are extra registers. 567 * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too. 568 */ 569 if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO && 570 info->prodid == PRODID_POSSIO_GCC)) { 571 if (link->config_index == 1 || 572 link->config_index == 3) { 573 setup_serial(link, info, base2, link->irq); 574 base2 = link->resource[0]->start; 575 } else { 576 setup_serial(link, info, link->resource[0]->start, 577 link->irq); 578 } 579 info->c950ctrl = base2; 580 581 /* 582 * FIXME: We really should wake up the port prior to 583 * handing it over to the serial layer. 584 */ 585 if (info->quirk && info->quirk->wakeup) 586 info->quirk->wakeup(link); 587 588 return 0; 589 } 590 591 setup_serial(link, info, link->resource[0]->start, link->irq); 592 for (i = 0; i < info->multi - 1; i++) 593 setup_serial(link, info, base2 + (8 * i), 594 link->irq); 595 return 0; 596 } 597 598 static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data) 599 { 600 struct serial_info *info = p_dev->priv; 601 602 if (!p_dev->resource[0]->end) 603 return -EINVAL; 604 605 if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0)) 606 info->multi = p_dev->resource[0]->end >> 3; 607 608 if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8) 609 && (p_dev->resource[1]->end == 8)) 610 info->multi = 2; 611 612 return 0; /* break */ 613 } 614 615 616 static int serial_config(struct pcmcia_device *link) 617 { 618 struct serial_info *info = link->priv; 619 int i; 620 621 dev_dbg(&link->dev, "serial_config\n"); 622 623 /* Is this a compliant multifunction card? */ 624 info->multi = (link->socket->functions > 1); 625 626 /* Is this a multiport card? */ 627 info->manfid = link->manf_id; 628 info->prodid = link->card_id; 629 630 for (i = 0; i < ARRAY_SIZE(quirks); i++) 631 if ((quirks[i].manfid == ~0 || 632 quirks[i].manfid == info->manfid) && 633 (quirks[i].prodid == ~0 || 634 quirks[i].prodid == info->prodid)) { 635 info->quirk = &quirks[i]; 636 break; 637 } 638 639 /* 640 * Another check for dual-serial cards: look for either serial or 641 * multifunction cards that ask for appropriate IO port ranges. 642 */ 643 if ((info->multi == 0) && 644 (link->has_func_id) && 645 (link->socket->pcmcia_pfc == 0) && 646 ((link->func_id == CISTPL_FUNCID_MULTI) || 647 (link->func_id == CISTPL_FUNCID_SERIAL))) { 648 if (pcmcia_loop_config(link, serial_check_for_multi, info)) 649 goto failed; 650 } 651 652 /* 653 * Apply any multi-port quirk. 654 */ 655 if (info->quirk && info->quirk->multi != -1) 656 info->multi = info->quirk->multi; 657 658 dev_info(&link->dev, 659 "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n", 660 link->manf_id, link->card_id, 661 link->socket->pcmcia_pfc, info->multi, info->quirk); 662 if (link->socket->pcmcia_pfc) 663 i = pfc_config(link); 664 else if (info->multi > 1) 665 i = multi_config(link); 666 else 667 i = simple_config(link); 668 669 if (i || info->ndev == 0) 670 goto failed; 671 672 /* 673 * Apply any post-init quirk. FIXME: This should really happen 674 * before we register the port, since it might already be in use. 675 */ 676 if (info->quirk && info->quirk->post) 677 if (info->quirk->post(link)) 678 goto failed; 679 680 return 0; 681 682 failed: 683 dev_warn(&link->dev, "failed to initialize\n"); 684 serial_remove(link); 685 return -ENODEV; 686 } 687 688 static const struct pcmcia_device_id serial_ids[] = { 689 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021), 690 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a), 691 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a), 692 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a), 693 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a), 694 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15), 695 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501), 696 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a), 697 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a), 698 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341), 699 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab), 700 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081), 701 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101), 702 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab), 703 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), 704 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), 705 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), 706 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), 707 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), 708 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), 709 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), 710 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), 711 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), 712 PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), 713 PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e), 714 PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), 715 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), 716 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), 717 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), 718 PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), 719 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), 720 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555), 721 PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001", 0x18df0ba0, 0x831b1064), 722 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), 723 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), 724 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), 725 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), 726 PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), 727 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), 728 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01), 729 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05), 730 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05), 731 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101), 732 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), 733 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), 734 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070), 735 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020), 736 PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), 737 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), 738 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), 739 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), 740 PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77), 741 PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), 742 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301), 743 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276), 744 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039), 745 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006), 746 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */ 747 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */ 748 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */ 749 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a), 750 PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */ 751 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50), 752 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51), 753 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52), 754 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53), 755 PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180), 756 PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */ 757 PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */ 758 PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */ 759 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e), 760 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b), 761 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025), 762 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045), 763 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052), 764 PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */ 765 PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */ 766 PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae), 767 PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef), 768 PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef), 769 PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef), 770 PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0), 771 PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e), 772 PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a), 773 PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02), 774 PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa), 775 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76), 776 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95), 777 PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed), 778 PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65), 779 PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b), 780 PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6), 781 PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb), 782 PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447), 783 PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f), 784 PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f), 785 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383), 786 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), 787 PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), 788 PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41), 789 PCMCIA_DEVICE_PROD_ID12("Option International", "GSM-Ready 56K/ISDN", 0x9d7cd6f5, 0xb23844aa), 790 PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), 791 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), 792 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d), 793 PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38), 794 PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292), 795 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"), 796 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"), 797 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), 798 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), 799 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), 800 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"), 801 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), 802 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), 803 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"), 804 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"), 805 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"), 806 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"), 807 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ 808 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */ 809 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ 810 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ 811 PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ 812 PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"), 813 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"), 814 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"), 815 PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"), 816 PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"), 817 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100 1.00.", 0x19ca78af, 0xf964f42b), 818 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100", 0x19ca78af, 0x71d98e83), 819 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232 1.00.", 0x19ca78af, 0x69fb7490), 820 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232", 0x19ca78af, 0xb6bc0235), 821 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232", 0x63f2e0bd, 0xb9e175d3), 822 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232-5", 0x63f2e0bd, 0xfce33442), 823 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232", 0x3beb8cf2, 0x171e7190), 824 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232-5", 0x3beb8cf2, 0x20da4262), 825 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF428", 0x3beb8cf2, 0xea5dd57d), 826 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF500", 0x3beb8cf2, 0xd77255fa), 827 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: IC232", 0x3beb8cf2, 0x6a709903), 828 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: SL232", 0x3beb8cf2, 0x18430676), 829 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: XL232", 0x3beb8cf2, 0x6f933767), 830 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7), 831 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41), 832 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029), 833 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4), 834 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial+Parallel Port: SP230", 0x3beb8cf2, 0xdb9e58bc), 835 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7), 836 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41), 837 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029), 838 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4), 839 PCMCIA_MFC_DEVICE_PROD_ID12(2, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4), 840 PCMCIA_MFC_DEVICE_PROD_ID12(3, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4), 841 PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b), 842 /* too generic */ 843 /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */ 844 /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */ 845 PCMCIA_DEVICE_FUNC_ID(2), 846 PCMCIA_DEVICE_NULL, 847 }; 848 MODULE_DEVICE_TABLE(pcmcia, serial_ids); 849 850 MODULE_FIRMWARE("cis/PCMLM28.cis"); 851 MODULE_FIRMWARE("cis/DP83903.cis"); 852 MODULE_FIRMWARE("cis/3CCFEM556.cis"); 853 MODULE_FIRMWARE("cis/3CXEM556.cis"); 854 MODULE_FIRMWARE("cis/SW_8xx_SER.cis"); 855 MODULE_FIRMWARE("cis/SW_7xx_SER.cis"); 856 MODULE_FIRMWARE("cis/SW_555_SER.cis"); 857 MODULE_FIRMWARE("cis/MT5634ZLX.cis"); 858 MODULE_FIRMWARE("cis/COMpad2.cis"); 859 MODULE_FIRMWARE("cis/COMpad4.cis"); 860 MODULE_FIRMWARE("cis/RS-COM-2P.cis"); 861 862 static struct pcmcia_driver serial_cs_driver = { 863 .owner = THIS_MODULE, 864 .name = "serial_cs", 865 .probe = serial_probe, 866 .remove = serial_detach, 867 .id_table = serial_ids, 868 .suspend = serial_suspend, 869 .resume = serial_resume, 870 }; 871 module_pcmcia_driver(serial_cs_driver); 872 873 MODULE_LICENSE("GPL"); 874