1 // SPDX-License-Identifier: (GPL-2.0 OR MPL-1.1) 2 /*====================================================================== 3 4 A driver for PCMCIA serial devices 5 6 serial_cs.c 1.134 2002/05/04 05:48:53 7 8 The contents of this file are subject to the Mozilla Public 9 License Version 1.1 (the "License"); you may not use this file 10 except in compliance with the License. You may obtain a copy of 11 the License at http://www.mozilla.org/MPL/ 12 13 Software distributed under the License is distributed on an "AS 14 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or 15 implied. See the License for the specific language governing 16 rights and limitations under the License. 17 18 The initial developer of the original code is David A. Hinds 19 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds 20 are Copyright (C) 1999 David A. Hinds. All Rights Reserved. 21 22 Alternatively, the contents of this file may be used under the 23 terms of the GNU General Public License version 2 (the "GPL"), in which 24 case the provisions of the GPL are applicable instead of the 25 above. If you wish to allow the use of your version of this file 26 only under the terms of the GPL and not to allow others to use 27 your version of this file under the MPL, indicate your decision 28 by deleting the provisions above and replace them with the notice 29 and other provisions required by the GPL. If you do not delete 30 the provisions above, a recipient may use your version of this 31 file under either the MPL or the GPL. 32 33 ======================================================================*/ 34 35 #include <linux/module.h> 36 #include <linux/moduleparam.h> 37 #include <linux/kernel.h> 38 #include <linux/ptrace.h> 39 #include <linux/slab.h> 40 #include <linux/string.h> 41 #include <linux/timer.h> 42 #include <linux/serial_core.h> 43 #include <linux/delay.h> 44 #include <linux/major.h> 45 #include <asm/io.h> 46 47 #include <pcmcia/cistpl.h> 48 #include <pcmcia/ciscode.h> 49 #include <pcmcia/ds.h> 50 #include <pcmcia/cisreg.h> 51 52 #include "8250.h" 53 54 55 /*====================================================================*/ 56 57 /* Parameters that can be set with 'insmod' */ 58 59 /* Enable the speaker? */ 60 static int do_sound = 1; 61 /* Skip strict UART tests? */ 62 static int buggy_uart; 63 64 module_param(do_sound, int, 0444); 65 module_param(buggy_uart, int, 0444); 66 67 /*====================================================================*/ 68 69 /* Table of multi-port card ID's */ 70 71 struct serial_quirk { 72 unsigned int manfid; 73 unsigned int prodid; 74 int multi; /* 1 = multifunction, > 1 = # ports */ 75 void (*config)(struct pcmcia_device *); 76 void (*setup)(struct pcmcia_device *, struct uart_8250_port *); 77 void (*wakeup)(struct pcmcia_device *); 78 int (*post)(struct pcmcia_device *); 79 }; 80 81 struct serial_info { 82 struct pcmcia_device *p_dev; 83 int ndev; 84 int multi; 85 int slave; 86 int manfid; 87 int prodid; 88 int c950ctrl; 89 int line[4]; 90 const struct serial_quirk *quirk; 91 }; 92 93 struct serial_cfg_mem { 94 tuple_t tuple; 95 cisparse_t parse; 96 u_char buf[256]; 97 }; 98 99 /* 100 * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6" 101 * manfid 0x0160, 0x0104 102 * This card appears to have a 14.7456MHz clock. 103 */ 104 /* Generic Modem: MD55x (GPRS/EDGE) have 105 * Elan VPU16551 UART with 14.7456MHz oscillator 106 * manfid 0x015D, 0x4C45 107 */ 108 static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_8250_port *uart) 109 { 110 uart->port.uartclk = 14745600; 111 } 112 113 static int quirk_post_ibm(struct pcmcia_device *link) 114 { 115 u8 val; 116 int ret; 117 118 ret = pcmcia_read_config_byte(link, 0x800, &val); 119 if (ret) 120 goto failed; 121 122 ret = pcmcia_write_config_byte(link, 0x800, val | 1); 123 if (ret) 124 goto failed; 125 return 0; 126 127 failed: 128 return -ENODEV; 129 } 130 131 /* 132 * Nokia cards are not really multiport cards. Shouldn't this 133 * be handled by setting the quirk entry .multi = 0 | 1 ? 134 */ 135 static void quirk_config_nokia(struct pcmcia_device *link) 136 { 137 struct serial_info *info = link->priv; 138 139 if (info->multi > 1) 140 info->multi = 1; 141 } 142 143 static void quirk_wakeup_oxsemi(struct pcmcia_device *link) 144 { 145 struct serial_info *info = link->priv; 146 147 if (info->c950ctrl) 148 outb(12, info->c950ctrl + 1); 149 } 150 151 /* request_region? oxsemi branch does no request_region too... */ 152 /* 153 * This sequence is needed to properly initialize MC45 attached to OXCF950. 154 * I tried decreasing these msleep()s, but it worked properly (survived 155 * 1000 stop/start operations) with these timeouts (or bigger). 156 */ 157 static void quirk_wakeup_possio_gcc(struct pcmcia_device *link) 158 { 159 struct serial_info *info = link->priv; 160 unsigned int ctrl = info->c950ctrl; 161 162 outb(0xA, ctrl + 1); 163 msleep(100); 164 outb(0xE, ctrl + 1); 165 msleep(300); 166 outb(0xC, ctrl + 1); 167 msleep(100); 168 outb(0xE, ctrl + 1); 169 msleep(200); 170 outb(0xF, ctrl + 1); 171 msleep(100); 172 outb(0xE, ctrl + 1); 173 msleep(100); 174 outb(0xC, ctrl + 1); 175 } 176 177 /* 178 * Socket Dual IO: this enables irq's for second port 179 */ 180 static void quirk_config_socket(struct pcmcia_device *link) 181 { 182 struct serial_info *info = link->priv; 183 184 if (info->multi) 185 link->config_flags |= CONF_ENABLE_ESR; 186 } 187 188 static const struct serial_quirk quirks[] = { 189 { 190 .manfid = 0x0160, 191 .prodid = 0x0104, 192 .multi = -1, 193 .setup = quirk_setup_brainboxes_0104, 194 }, { 195 .manfid = 0x015D, 196 .prodid = 0x4C45, 197 .multi = -1, 198 .setup = quirk_setup_brainboxes_0104, 199 }, { 200 .manfid = MANFID_IBM, 201 .prodid = ~0, 202 .multi = -1, 203 .post = quirk_post_ibm, 204 }, { 205 .manfid = MANFID_INTEL, 206 .prodid = PRODID_INTEL_DUAL_RS232, 207 .multi = 2, 208 }, { 209 .manfid = MANFID_NATINST, 210 .prodid = PRODID_NATINST_QUAD_RS232, 211 .multi = 4, 212 }, { 213 .manfid = MANFID_NOKIA, 214 .prodid = ~0, 215 .multi = -1, 216 .config = quirk_config_nokia, 217 }, { 218 .manfid = MANFID_OMEGA, 219 .prodid = PRODID_OMEGA_QSP_100, 220 .multi = 4, 221 }, { 222 .manfid = MANFID_OXSEMI, 223 .prodid = ~0, 224 .multi = -1, 225 .wakeup = quirk_wakeup_oxsemi, 226 }, { 227 .manfid = MANFID_POSSIO, 228 .prodid = PRODID_POSSIO_GCC, 229 .multi = -1, 230 .wakeup = quirk_wakeup_possio_gcc, 231 }, { 232 .manfid = MANFID_QUATECH, 233 .prodid = PRODID_QUATECH_DUAL_RS232, 234 .multi = 2, 235 }, { 236 .manfid = MANFID_QUATECH, 237 .prodid = PRODID_QUATECH_DUAL_RS232_D1, 238 .multi = 2, 239 }, { 240 .manfid = MANFID_QUATECH, 241 .prodid = PRODID_QUATECH_DUAL_RS232_G, 242 .multi = 2, 243 }, { 244 .manfid = MANFID_QUATECH, 245 .prodid = PRODID_QUATECH_QUAD_RS232, 246 .multi = 4, 247 }, { 248 .manfid = MANFID_SOCKET, 249 .prodid = PRODID_SOCKET_DUAL_RS232, 250 .multi = 2, 251 .config = quirk_config_socket, 252 }, { 253 .manfid = MANFID_SOCKET, 254 .prodid = ~0, 255 .multi = -1, 256 .config = quirk_config_socket, 257 } 258 }; 259 260 261 static int serial_config(struct pcmcia_device *link); 262 263 264 static void serial_remove(struct pcmcia_device *link) 265 { 266 struct serial_info *info = link->priv; 267 int i; 268 269 dev_dbg(&link->dev, "serial_release\n"); 270 271 /* 272 * Recheck to see if the device is still configured. 273 */ 274 for (i = 0; i < info->ndev; i++) 275 serial8250_unregister_port(info->line[i]); 276 277 if (!info->slave) 278 pcmcia_disable_device(link); 279 } 280 281 static int serial_suspend(struct pcmcia_device *link) 282 { 283 struct serial_info *info = link->priv; 284 int i; 285 286 for (i = 0; i < info->ndev; i++) 287 serial8250_suspend_port(info->line[i]); 288 289 return 0; 290 } 291 292 static int serial_resume(struct pcmcia_device *link) 293 { 294 struct serial_info *info = link->priv; 295 int i; 296 297 for (i = 0; i < info->ndev; i++) 298 serial8250_resume_port(info->line[i]); 299 300 if (info->quirk && info->quirk->wakeup) 301 info->quirk->wakeup(link); 302 303 return 0; 304 } 305 306 static int serial_probe(struct pcmcia_device *link) 307 { 308 struct serial_info *info; 309 310 dev_dbg(&link->dev, "serial_attach()\n"); 311 312 /* Create new serial device */ 313 info = kzalloc(sizeof(*info), GFP_KERNEL); 314 if (!info) 315 return -ENOMEM; 316 info->p_dev = link; 317 link->priv = info; 318 319 link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; 320 if (do_sound) 321 link->config_flags |= CONF_ENABLE_SPKR; 322 323 return serial_config(link); 324 } 325 326 static void serial_detach(struct pcmcia_device *link) 327 { 328 struct serial_info *info = link->priv; 329 330 dev_dbg(&link->dev, "serial_detach\n"); 331 332 /* 333 * Ensure that the ports have been released. 334 */ 335 serial_remove(link); 336 337 /* free bits */ 338 kfree(info); 339 } 340 341 /*====================================================================*/ 342 343 static int setup_serial(struct pcmcia_device *handle, struct serial_info *info, 344 unsigned int iobase, int irq) 345 { 346 struct uart_8250_port uart; 347 int line; 348 349 memset(&uart, 0, sizeof(uart)); 350 uart.port.iobase = iobase; 351 uart.port.irq = irq; 352 uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; 353 uart.port.uartclk = 1843200; 354 uart.port.dev = &handle->dev; 355 if (buggy_uart) 356 uart.port.flags |= UPF_BUGGY_UART; 357 358 if (info->quirk && info->quirk->setup) 359 info->quirk->setup(handle, &uart); 360 361 line = serial8250_register_8250_port(&uart); 362 if (line < 0) { 363 pr_err("serial_cs: serial8250_register_8250_port() at 0x%04lx, irq %d failed\n", 364 (unsigned long)iobase, irq); 365 return -EINVAL; 366 } 367 368 info->line[info->ndev] = line; 369 info->ndev++; 370 371 return 0; 372 } 373 374 /*====================================================================*/ 375 376 static int pfc_config(struct pcmcia_device *p_dev) 377 { 378 unsigned int port = 0; 379 struct serial_info *info = p_dev->priv; 380 381 if ((p_dev->resource[1]->end != 0) && 382 (resource_size(p_dev->resource[1]) == 8)) { 383 port = p_dev->resource[1]->start; 384 info->slave = 1; 385 } else if ((info->manfid == MANFID_OSITECH) && 386 (resource_size(p_dev->resource[0]) == 0x40)) { 387 port = p_dev->resource[0]->start + 0x28; 388 info->slave = 1; 389 } 390 if (info->slave) 391 return setup_serial(p_dev, info, port, p_dev->irq); 392 393 dev_warn(&p_dev->dev, "no usable port range found, giving up\n"); 394 return -ENODEV; 395 } 396 397 static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data) 398 { 399 static const int size_table[2] = { 8, 16 }; 400 int *try = priv_data; 401 402 if (p_dev->resource[0]->start == 0) 403 return -ENODEV; 404 405 if ((*try & 0x1) == 0) 406 p_dev->io_lines = 16; 407 408 if (p_dev->resource[0]->end != size_table[(*try >> 1)]) 409 return -ENODEV; 410 411 p_dev->resource[0]->end = 8; 412 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 413 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; 414 415 return pcmcia_request_io(p_dev); 416 } 417 418 static int simple_config_check_notpicky(struct pcmcia_device *p_dev, 419 void *priv_data) 420 { 421 static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; 422 int j; 423 424 if (p_dev->io_lines > 3) 425 return -ENODEV; 426 427 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 428 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; 429 p_dev->resource[0]->end = 8; 430 431 for (j = 0; j < 5; j++) { 432 p_dev->resource[0]->start = base[j]; 433 p_dev->io_lines = base[j] ? 16 : 3; 434 if (!pcmcia_request_io(p_dev)) 435 return 0; 436 } 437 return -ENODEV; 438 } 439 440 static int simple_config(struct pcmcia_device *link) 441 { 442 struct serial_info *info = link->priv; 443 int ret, try; 444 445 /* 446 * First pass: look for a config entry that looks normal. 447 * Two tries: without IO aliases, then with aliases. 448 */ 449 link->config_flags |= CONF_AUTO_SET_VPP; 450 for (try = 0; try < 4; try++) 451 if (!pcmcia_loop_config(link, simple_config_check, &try)) 452 goto found_port; 453 454 /* 455 * Second pass: try to find an entry that isn't picky about 456 * its base address, then try to grab any standard serial port 457 * address, and finally try to get any free port. 458 */ 459 if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL)) 460 goto found_port; 461 462 dev_warn(&link->dev, "no usable port range found, giving up\n"); 463 return -1; 464 465 found_port: 466 if (info->multi && (info->manfid == MANFID_3COM)) 467 link->config_index &= ~(0x08); 468 469 /* 470 * Apply any configuration quirks. 471 */ 472 if (info->quirk && info->quirk->config) 473 info->quirk->config(link); 474 475 ret = pcmcia_enable_device(link); 476 if (ret != 0) 477 return -1; 478 return setup_serial(link, info, link->resource[0]->start, link->irq); 479 } 480 481 static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data) 482 { 483 int *multi = priv_data; 484 485 if (p_dev->resource[1]->end) 486 return -EINVAL; 487 488 /* 489 * The quad port cards have bad CIS's, so just look for a 490 * window larger than 8 ports and assume it will be right. 491 */ 492 if (p_dev->resource[0]->end <= 8) 493 return -EINVAL; 494 495 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 496 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; 497 p_dev->resource[0]->end = *multi * 8; 498 499 if (pcmcia_request_io(p_dev)) 500 return -ENODEV; 501 return 0; 502 } 503 504 static int multi_config_check_notpicky(struct pcmcia_device *p_dev, 505 void *priv_data) 506 { 507 int *base2 = priv_data; 508 509 if (!p_dev->resource[0]->end || !p_dev->resource[1]->end || 510 p_dev->resource[0]->start + 8 != p_dev->resource[1]->start) 511 return -ENODEV; 512 513 p_dev->resource[0]->end = p_dev->resource[1]->end = 8; 514 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 515 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; 516 517 if (pcmcia_request_io(p_dev)) 518 return -ENODEV; 519 520 *base2 = p_dev->resource[0]->start + 8; 521 return 0; 522 } 523 524 static int multi_config(struct pcmcia_device *link) 525 { 526 struct serial_info *info = link->priv; 527 int i, base2 = 0; 528 529 /* First, look for a generic full-sized window */ 530 if (!pcmcia_loop_config(link, multi_config_check, &info->multi)) 531 base2 = link->resource[0]->start + 8; 532 else { 533 /* If that didn't work, look for two windows */ 534 info->multi = 2; 535 if (pcmcia_loop_config(link, multi_config_check_notpicky, 536 &base2)) { 537 dev_warn(&link->dev, 538 "no usable port range found, giving up\n"); 539 return -ENODEV; 540 } 541 } 542 543 if (!link->irq) 544 dev_warn(&link->dev, "no usable IRQ found, continuing...\n"); 545 546 /* 547 * Apply any configuration quirks. 548 */ 549 if (info->quirk && info->quirk->config) 550 info->quirk->config(link); 551 552 i = pcmcia_enable_device(link); 553 if (i != 0) 554 return -ENODEV; 555 556 /* The Oxford Semiconductor OXCF950 cards are in fact single-port: 557 * 8 registers are for the UART, the others are extra registers. 558 * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too. 559 */ 560 if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO && 561 info->prodid == PRODID_POSSIO_GCC)) { 562 if (link->config_index == 1 || 563 link->config_index == 3) { 564 setup_serial(link, info, base2, link->irq); 565 base2 = link->resource[0]->start; 566 } else { 567 setup_serial(link, info, link->resource[0]->start, 568 link->irq); 569 } 570 info->c950ctrl = base2; 571 572 /* 573 * FIXME: We really should wake up the port prior to 574 * handing it over to the serial layer. 575 */ 576 if (info->quirk && info->quirk->wakeup) 577 info->quirk->wakeup(link); 578 579 return 0; 580 } 581 582 setup_serial(link, info, link->resource[0]->start, link->irq); 583 for (i = 0; i < info->multi - 1; i++) 584 setup_serial(link, info, base2 + (8 * i), 585 link->irq); 586 return 0; 587 } 588 589 static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data) 590 { 591 struct serial_info *info = p_dev->priv; 592 593 if (!p_dev->resource[0]->end) 594 return -EINVAL; 595 596 if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0)) 597 info->multi = p_dev->resource[0]->end >> 3; 598 599 if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8) 600 && (p_dev->resource[1]->end == 8)) 601 info->multi = 2; 602 603 return 0; /* break */ 604 } 605 606 607 static int serial_config(struct pcmcia_device *link) 608 { 609 struct serial_info *info = link->priv; 610 int i; 611 612 dev_dbg(&link->dev, "serial_config\n"); 613 614 /* Is this a compliant multifunction card? */ 615 info->multi = (link->socket->functions > 1); 616 617 /* Is this a multiport card? */ 618 info->manfid = link->manf_id; 619 info->prodid = link->card_id; 620 621 for (i = 0; i < ARRAY_SIZE(quirks); i++) 622 if ((quirks[i].manfid == ~0 || 623 quirks[i].manfid == info->manfid) && 624 (quirks[i].prodid == ~0 || 625 quirks[i].prodid == info->prodid)) { 626 info->quirk = &quirks[i]; 627 break; 628 } 629 630 /* 631 * Another check for dual-serial cards: look for either serial or 632 * multifunction cards that ask for appropriate IO port ranges. 633 */ 634 if ((info->multi == 0) && 635 (link->has_func_id) && 636 (link->socket->pcmcia_pfc == 0) && 637 ((link->func_id == CISTPL_FUNCID_MULTI) || 638 (link->func_id == CISTPL_FUNCID_SERIAL))) { 639 if (pcmcia_loop_config(link, serial_check_for_multi, info)) 640 goto failed; 641 } 642 643 /* 644 * Apply any multi-port quirk. 645 */ 646 if (info->quirk && info->quirk->multi != -1) 647 info->multi = info->quirk->multi; 648 649 dev_info(&link->dev, 650 "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n", 651 link->manf_id, link->card_id, 652 link->socket->pcmcia_pfc, info->multi, info->quirk); 653 if (link->socket->pcmcia_pfc) 654 i = pfc_config(link); 655 else if (info->multi > 1) 656 i = multi_config(link); 657 else 658 i = simple_config(link); 659 660 if (i || info->ndev == 0) 661 goto failed; 662 663 /* 664 * Apply any post-init quirk. FIXME: This should really happen 665 * before we register the port, since it might already be in use. 666 */ 667 if (info->quirk && info->quirk->post) 668 if (info->quirk->post(link)) 669 goto failed; 670 671 return 0; 672 673 failed: 674 dev_warn(&link->dev, "failed to initialize\n"); 675 serial_remove(link); 676 return -ENODEV; 677 } 678 679 static const struct pcmcia_device_id serial_ids[] = { 680 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021), 681 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a), 682 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a), 683 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a), 684 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a), 685 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15), 686 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501), 687 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a), 688 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a), 689 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341), 690 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab), 691 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081), 692 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101), 693 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab), 694 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), 695 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), 696 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), 697 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), 698 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), 699 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), 700 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), 701 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), 702 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), 703 PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), 704 PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e), 705 PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), 706 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), 707 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), 708 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), 709 PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), 710 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), 711 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555), 712 PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001", 0x18df0ba0, 0x831b1064), 713 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), 714 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), 715 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), 716 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), 717 PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), 718 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), 719 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01), 720 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05), 721 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05), 722 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101), 723 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), 724 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), 725 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070), 726 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020), 727 PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), 728 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), 729 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), 730 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), 731 PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77), 732 PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), 733 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301), 734 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276), 735 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039), 736 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006), 737 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */ 738 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */ 739 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */ 740 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a), 741 PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */ 742 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50), 743 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51), 744 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52), 745 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53), 746 PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180), 747 PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */ 748 PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */ 749 PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */ 750 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e), 751 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b), 752 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025), 753 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045), 754 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052), 755 PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */ 756 PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */ 757 PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae), 758 PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef), 759 PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef), 760 PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef), 761 PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0), 762 PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e), 763 PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a), 764 PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02), 765 PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa), 766 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76), 767 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95), 768 PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed), 769 PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65), 770 PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b), 771 PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6), 772 PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb), 773 PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447), 774 PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f), 775 PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f), 776 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383), 777 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), 778 PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), 779 PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41), 780 PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), 781 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), 782 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d), 783 PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38), 784 PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292), 785 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"), 786 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"), 787 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), 788 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), 789 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), 790 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"), 791 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), 792 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), 793 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"), 794 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"), 795 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"), 796 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"), 797 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ 798 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */ 799 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ 800 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ 801 PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ 802 PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"), 803 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"), 804 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"), 805 PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"), 806 PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"), 807 PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"), 808 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100 1.00.", 0x19ca78af, 0xf964f42b), 809 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100", 0x19ca78af, 0x71d98e83), 810 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232 1.00.", 0x19ca78af, 0x69fb7490), 811 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232", 0x19ca78af, 0xb6bc0235), 812 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232", 0x63f2e0bd, 0xb9e175d3), 813 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232-5", 0x63f2e0bd, 0xfce33442), 814 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232", 0x3beb8cf2, 0x171e7190), 815 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232-5", 0x3beb8cf2, 0x20da4262), 816 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF428", 0x3beb8cf2, 0xea5dd57d), 817 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF500", 0x3beb8cf2, 0xd77255fa), 818 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: IC232", 0x3beb8cf2, 0x6a709903), 819 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: SL232", 0x3beb8cf2, 0x18430676), 820 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: XL232", 0x3beb8cf2, 0x6f933767), 821 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7), 822 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41), 823 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029), 824 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4), 825 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial+Parallel Port: SP230", 0x3beb8cf2, 0xdb9e58bc), 826 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7), 827 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41), 828 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029), 829 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4), 830 PCMCIA_MFC_DEVICE_PROD_ID12(2, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4), 831 PCMCIA_MFC_DEVICE_PROD_ID12(3, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4), 832 PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b), 833 /* too generic */ 834 /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */ 835 /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */ 836 PCMCIA_DEVICE_FUNC_ID(2), 837 PCMCIA_DEVICE_NULL, 838 }; 839 MODULE_DEVICE_TABLE(pcmcia, serial_ids); 840 841 MODULE_FIRMWARE("cis/PCMLM28.cis"); 842 MODULE_FIRMWARE("cis/DP83903.cis"); 843 MODULE_FIRMWARE("cis/3CCFEM556.cis"); 844 MODULE_FIRMWARE("cis/3CXEM556.cis"); 845 MODULE_FIRMWARE("cis/SW_8xx_SER.cis"); 846 MODULE_FIRMWARE("cis/SW_7xx_SER.cis"); 847 MODULE_FIRMWARE("cis/SW_555_SER.cis"); 848 MODULE_FIRMWARE("cis/MT5634ZLX.cis"); 849 MODULE_FIRMWARE("cis/COMpad2.cis"); 850 MODULE_FIRMWARE("cis/COMpad4.cis"); 851 MODULE_FIRMWARE("cis/RS-COM-2P.cis"); 852 853 static struct pcmcia_driver serial_cs_driver = { 854 .owner = THIS_MODULE, 855 .name = "serial_cs", 856 .probe = serial_probe, 857 .remove = serial_detach, 858 .id_table = serial_ids, 859 .suspend = serial_suspend, 860 .resume = serial_resume, 861 }; 862 module_pcmcia_driver(serial_cs_driver); 863 864 MODULE_LICENSE("GPL"); 865