1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Probe module for 8250/16550-type PCI serial ports. 4 * 5 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. 6 * 7 * Copyright (C) 2001 Russell King, All Rights Reserved. 8 */ 9 #undef DEBUG 10 #include <linux/module.h> 11 #include <linux/pci.h> 12 #include <linux/string.h> 13 #include <linux/kernel.h> 14 #include <linux/slab.h> 15 #include <linux/delay.h> 16 #include <linux/tty.h> 17 #include <linux/serial_reg.h> 18 #include <linux/serial_core.h> 19 #include <linux/8250_pci.h> 20 #include <linux/bitops.h> 21 22 #include <asm/byteorder.h> 23 #include <asm/io.h> 24 25 #include "8250.h" 26 27 /* 28 * init function returns: 29 * > 0 - number of ports 30 * = 0 - use board->num_ports 31 * < 0 - error 32 */ 33 struct pci_serial_quirk { 34 u32 vendor; 35 u32 device; 36 u32 subvendor; 37 u32 subdevice; 38 int (*probe)(struct pci_dev *dev); 39 int (*init)(struct pci_dev *dev); 40 int (*setup)(struct serial_private *, 41 const struct pciserial_board *, 42 struct uart_8250_port *, int); 43 void (*exit)(struct pci_dev *dev); 44 }; 45 46 #define PCI_NUM_BAR_RESOURCES 6 47 48 struct serial_private { 49 struct pci_dev *dev; 50 unsigned int nr; 51 struct pci_serial_quirk *quirk; 52 const struct pciserial_board *board; 53 int line[0]; 54 }; 55 56 static int pci_default_setup(struct serial_private*, 57 const struct pciserial_board*, struct uart_8250_port *, int); 58 59 static void moan_device(const char *str, struct pci_dev *dev) 60 { 61 dev_err(&dev->dev, 62 "%s: %s\n" 63 "Please send the output of lspci -vv, this\n" 64 "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" 65 "manufacturer and name of serial board or\n" 66 "modem board to <linux-serial@vger.kernel.org>.\n", 67 pci_name(dev), str, dev->vendor, dev->device, 68 dev->subsystem_vendor, dev->subsystem_device); 69 } 70 71 static int 72 setup_port(struct serial_private *priv, struct uart_8250_port *port, 73 int bar, int offset, int regshift) 74 { 75 struct pci_dev *dev = priv->dev; 76 77 if (bar >= PCI_NUM_BAR_RESOURCES) 78 return -EINVAL; 79 80 if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) { 81 if (!pcim_iomap(dev, bar, 0) && !pcim_iomap_table(dev)) 82 return -ENOMEM; 83 84 port->port.iotype = UPIO_MEM; 85 port->port.iobase = 0; 86 port->port.mapbase = pci_resource_start(dev, bar) + offset; 87 port->port.membase = pcim_iomap_table(dev)[bar] + offset; 88 port->port.regshift = regshift; 89 } else { 90 port->port.iotype = UPIO_PORT; 91 port->port.iobase = pci_resource_start(dev, bar) + offset; 92 port->port.mapbase = 0; 93 port->port.membase = NULL; 94 port->port.regshift = 0; 95 } 96 return 0; 97 } 98 99 /* 100 * ADDI-DATA GmbH communication cards <info@addi-data.com> 101 */ 102 static int addidata_apci7800_setup(struct serial_private *priv, 103 const struct pciserial_board *board, 104 struct uart_8250_port *port, int idx) 105 { 106 unsigned int bar = 0, offset = board->first_offset; 107 bar = FL_GET_BASE(board->flags); 108 109 if (idx < 2) { 110 offset += idx * board->uart_offset; 111 } else if ((idx >= 2) && (idx < 4)) { 112 bar += 1; 113 offset += ((idx - 2) * board->uart_offset); 114 } else if ((idx >= 4) && (idx < 6)) { 115 bar += 2; 116 offset += ((idx - 4) * board->uart_offset); 117 } else if (idx >= 6) { 118 bar += 3; 119 offset += ((idx - 6) * board->uart_offset); 120 } 121 122 return setup_port(priv, port, bar, offset, board->reg_shift); 123 } 124 125 /* 126 * AFAVLAB uses a different mixture of BARs and offsets 127 * Not that ugly ;) -- HW 128 */ 129 static int 130 afavlab_setup(struct serial_private *priv, const struct pciserial_board *board, 131 struct uart_8250_port *port, int idx) 132 { 133 unsigned int bar, offset = board->first_offset; 134 135 bar = FL_GET_BASE(board->flags); 136 if (idx < 4) 137 bar += idx; 138 else { 139 bar = 4; 140 offset += (idx - 4) * board->uart_offset; 141 } 142 143 return setup_port(priv, port, bar, offset, board->reg_shift); 144 } 145 146 /* 147 * HP's Remote Management Console. The Diva chip came in several 148 * different versions. N-class, L2000 and A500 have two Diva chips, each 149 * with 3 UARTs (the third UART on the second chip is unused). Superdome 150 * and Keystone have one Diva chip with 3 UARTs. Some later machines have 151 * one Diva chip, but it has been expanded to 5 UARTs. 152 */ 153 static int pci_hp_diva_init(struct pci_dev *dev) 154 { 155 int rc = 0; 156 157 switch (dev->subsystem_device) { 158 case PCI_DEVICE_ID_HP_DIVA_TOSCA1: 159 case PCI_DEVICE_ID_HP_DIVA_HALFDOME: 160 case PCI_DEVICE_ID_HP_DIVA_KEYSTONE: 161 case PCI_DEVICE_ID_HP_DIVA_EVEREST: 162 rc = 3; 163 break; 164 case PCI_DEVICE_ID_HP_DIVA_TOSCA2: 165 rc = 2; 166 break; 167 case PCI_DEVICE_ID_HP_DIVA_MAESTRO: 168 rc = 4; 169 break; 170 case PCI_DEVICE_ID_HP_DIVA_POWERBAR: 171 case PCI_DEVICE_ID_HP_DIVA_HURRICANE: 172 rc = 1; 173 break; 174 } 175 176 return rc; 177 } 178 179 /* 180 * HP's Diva chip puts the 4th/5th serial port further out, and 181 * some serial ports are supposed to be hidden on certain models. 182 */ 183 static int 184 pci_hp_diva_setup(struct serial_private *priv, 185 const struct pciserial_board *board, 186 struct uart_8250_port *port, int idx) 187 { 188 unsigned int offset = board->first_offset; 189 unsigned int bar = FL_GET_BASE(board->flags); 190 191 switch (priv->dev->subsystem_device) { 192 case PCI_DEVICE_ID_HP_DIVA_MAESTRO: 193 if (idx == 3) 194 idx++; 195 break; 196 case PCI_DEVICE_ID_HP_DIVA_EVEREST: 197 if (idx > 0) 198 idx++; 199 if (idx > 2) 200 idx++; 201 break; 202 } 203 if (idx > 2) 204 offset = 0x18; 205 206 offset += idx * board->uart_offset; 207 208 return setup_port(priv, port, bar, offset, board->reg_shift); 209 } 210 211 /* 212 * Added for EKF Intel i960 serial boards 213 */ 214 static int pci_inteli960ni_init(struct pci_dev *dev) 215 { 216 u32 oldval; 217 218 if (!(dev->subsystem_device & 0x1000)) 219 return -ENODEV; 220 221 /* is firmware started? */ 222 pci_read_config_dword(dev, 0x44, &oldval); 223 if (oldval == 0x00001000L) { /* RESET value */ 224 dev_dbg(&dev->dev, "Local i960 firmware missing\n"); 225 return -ENODEV; 226 } 227 return 0; 228 } 229 230 /* 231 * Some PCI serial cards using the PLX 9050 PCI interface chip require 232 * that the card interrupt be explicitly enabled or disabled. This 233 * seems to be mainly needed on card using the PLX which also use I/O 234 * mapped memory. 235 */ 236 static int pci_plx9050_init(struct pci_dev *dev) 237 { 238 u8 irq_config; 239 void __iomem *p; 240 241 if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) { 242 moan_device("no memory in bar 0", dev); 243 return 0; 244 } 245 246 irq_config = 0x41; 247 if (dev->vendor == PCI_VENDOR_ID_PANACOM || 248 dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) 249 irq_config = 0x43; 250 251 if ((dev->vendor == PCI_VENDOR_ID_PLX) && 252 (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) 253 /* 254 * As the megawolf cards have the int pins active 255 * high, and have 2 UART chips, both ints must be 256 * enabled on the 9050. Also, the UARTS are set in 257 * 16450 mode by default, so we have to enable the 258 * 16C950 'enhanced' mode so that we can use the 259 * deep FIFOs 260 */ 261 irq_config = 0x5b; 262 /* 263 * enable/disable interrupts 264 */ 265 p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); 266 if (p == NULL) 267 return -ENOMEM; 268 writel(irq_config, p + 0x4c); 269 270 /* 271 * Read the register back to ensure that it took effect. 272 */ 273 readl(p + 0x4c); 274 iounmap(p); 275 276 return 0; 277 } 278 279 static void pci_plx9050_exit(struct pci_dev *dev) 280 { 281 u8 __iomem *p; 282 283 if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) 284 return; 285 286 /* 287 * disable interrupts 288 */ 289 p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); 290 if (p != NULL) { 291 writel(0, p + 0x4c); 292 293 /* 294 * Read the register back to ensure that it took effect. 295 */ 296 readl(p + 0x4c); 297 iounmap(p); 298 } 299 } 300 301 #define NI8420_INT_ENABLE_REG 0x38 302 #define NI8420_INT_ENABLE_BIT 0x2000 303 304 static void pci_ni8420_exit(struct pci_dev *dev) 305 { 306 void __iomem *p; 307 unsigned int bar = 0; 308 309 if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { 310 moan_device("no memory in bar", dev); 311 return; 312 } 313 314 p = pci_ioremap_bar(dev, bar); 315 if (p == NULL) 316 return; 317 318 /* Disable the CPU Interrupt */ 319 writel(readl(p + NI8420_INT_ENABLE_REG) & ~(NI8420_INT_ENABLE_BIT), 320 p + NI8420_INT_ENABLE_REG); 321 iounmap(p); 322 } 323 324 325 /* MITE registers */ 326 #define MITE_IOWBSR1 0xc4 327 #define MITE_IOWCR1 0xf4 328 #define MITE_LCIMR1 0x08 329 #define MITE_LCIMR2 0x10 330 331 #define MITE_LCIMR2_CLR_CPU_IE (1 << 30) 332 333 static void pci_ni8430_exit(struct pci_dev *dev) 334 { 335 void __iomem *p; 336 unsigned int bar = 0; 337 338 if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { 339 moan_device("no memory in bar", dev); 340 return; 341 } 342 343 p = pci_ioremap_bar(dev, bar); 344 if (p == NULL) 345 return; 346 347 /* Disable the CPU Interrupt */ 348 writel(MITE_LCIMR2_CLR_CPU_IE, p + MITE_LCIMR2); 349 iounmap(p); 350 } 351 352 /* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */ 353 static int 354 sbs_setup(struct serial_private *priv, const struct pciserial_board *board, 355 struct uart_8250_port *port, int idx) 356 { 357 unsigned int bar, offset = board->first_offset; 358 359 bar = 0; 360 361 if (idx < 4) { 362 /* first four channels map to 0, 0x100, 0x200, 0x300 */ 363 offset += idx * board->uart_offset; 364 } else if (idx < 8) { 365 /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */ 366 offset += idx * board->uart_offset + 0xC00; 367 } else /* we have only 8 ports on PMC-OCTALPRO */ 368 return 1; 369 370 return setup_port(priv, port, bar, offset, board->reg_shift); 371 } 372 373 /* 374 * This does initialization for PMC OCTALPRO cards: 375 * maps the device memory, resets the UARTs (needed, bc 376 * if the module is removed and inserted again, the card 377 * is in the sleep mode) and enables global interrupt. 378 */ 379 380 /* global control register offset for SBS PMC-OctalPro */ 381 #define OCT_REG_CR_OFF 0x500 382 383 static int sbs_init(struct pci_dev *dev) 384 { 385 u8 __iomem *p; 386 387 p = pci_ioremap_bar(dev, 0); 388 389 if (p == NULL) 390 return -ENOMEM; 391 /* Set bit-4 Control Register (UART RESET) in to reset the uarts */ 392 writeb(0x10, p + OCT_REG_CR_OFF); 393 udelay(50); 394 writeb(0x0, p + OCT_REG_CR_OFF); 395 396 /* Set bit-2 (INTENABLE) of Control Register */ 397 writeb(0x4, p + OCT_REG_CR_OFF); 398 iounmap(p); 399 400 return 0; 401 } 402 403 /* 404 * Disables the global interrupt of PMC-OctalPro 405 */ 406 407 static void sbs_exit(struct pci_dev *dev) 408 { 409 u8 __iomem *p; 410 411 p = pci_ioremap_bar(dev, 0); 412 /* FIXME: What if resource_len < OCT_REG_CR_OFF */ 413 if (p != NULL) 414 writeb(0, p + OCT_REG_CR_OFF); 415 iounmap(p); 416 } 417 418 /* 419 * SIIG serial cards have an PCI interface chip which also controls 420 * the UART clocking frequency. Each UART can be clocked independently 421 * (except cards equipped with 4 UARTs) and initial clocking settings 422 * are stored in the EEPROM chip. It can cause problems because this 423 * version of serial driver doesn't support differently clocked UART's 424 * on single PCI card. To prevent this, initialization functions set 425 * high frequency clocking for all UART's on given card. It is safe (I 426 * hope) because it doesn't touch EEPROM settings to prevent conflicts 427 * with other OSes (like M$ DOS). 428 * 429 * SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999 430 * 431 * There is two family of SIIG serial cards with different PCI 432 * interface chip and different configuration methods: 433 * - 10x cards have control registers in IO and/or memory space; 434 * - 20x cards have control registers in standard PCI configuration space. 435 * 436 * Note: all 10x cards have PCI device ids 0x10.. 437 * all 20x cards have PCI device ids 0x20.. 438 * 439 * There are also Quartet Serial cards which use Oxford Semiconductor 440 * 16954 quad UART PCI chip clocked by 18.432 MHz quartz. 441 * 442 * Note: some SIIG cards are probed by the parport_serial object. 443 */ 444 445 #define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc) 446 #define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8) 447 448 static int pci_siig10x_init(struct pci_dev *dev) 449 { 450 u16 data; 451 void __iomem *p; 452 453 switch (dev->device & 0xfff8) { 454 case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */ 455 data = 0xffdf; 456 break; 457 case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */ 458 data = 0xf7ff; 459 break; 460 default: /* 1S1P, 4S */ 461 data = 0xfffb; 462 break; 463 } 464 465 p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); 466 if (p == NULL) 467 return -ENOMEM; 468 469 writew(readw(p + 0x28) & data, p + 0x28); 470 readw(p + 0x28); 471 iounmap(p); 472 return 0; 473 } 474 475 #define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc) 476 #define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc) 477 478 static int pci_siig20x_init(struct pci_dev *dev) 479 { 480 u8 data; 481 482 /* Change clock frequency for the first UART. */ 483 pci_read_config_byte(dev, 0x6f, &data); 484 pci_write_config_byte(dev, 0x6f, data & 0xef); 485 486 /* If this card has 2 UART, we have to do the same with second UART. */ 487 if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) || 488 ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) { 489 pci_read_config_byte(dev, 0x73, &data); 490 pci_write_config_byte(dev, 0x73, data & 0xef); 491 } 492 return 0; 493 } 494 495 static int pci_siig_init(struct pci_dev *dev) 496 { 497 unsigned int type = dev->device & 0xff00; 498 499 if (type == 0x1000) 500 return pci_siig10x_init(dev); 501 else if (type == 0x2000) 502 return pci_siig20x_init(dev); 503 504 moan_device("Unknown SIIG card", dev); 505 return -ENODEV; 506 } 507 508 static int pci_siig_setup(struct serial_private *priv, 509 const struct pciserial_board *board, 510 struct uart_8250_port *port, int idx) 511 { 512 unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0; 513 514 if (idx > 3) { 515 bar = 4; 516 offset = (idx - 4) * 8; 517 } 518 519 return setup_port(priv, port, bar, offset, 0); 520 } 521 522 /* 523 * Timedia has an explosion of boards, and to avoid the PCI table from 524 * growing *huge*, we use this function to collapse some 70 entries 525 * in the PCI table into one, for sanity's and compactness's sake. 526 */ 527 static const unsigned short timedia_single_port[] = { 528 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0 529 }; 530 531 static const unsigned short timedia_dual_port[] = { 532 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, 533 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, 534 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, 535 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, 536 0xD079, 0 537 }; 538 539 static const unsigned short timedia_quad_port[] = { 540 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, 541 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, 542 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, 543 0xB157, 0 544 }; 545 546 static const unsigned short timedia_eight_port[] = { 547 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, 548 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 549 }; 550 551 static const struct timedia_struct { 552 int num; 553 const unsigned short *ids; 554 } timedia_data[] = { 555 { 1, timedia_single_port }, 556 { 2, timedia_dual_port }, 557 { 4, timedia_quad_port }, 558 { 8, timedia_eight_port } 559 }; 560 561 /* 562 * There are nearly 70 different Timedia/SUNIX PCI serial devices. Instead of 563 * listing them individually, this driver merely grabs them all with 564 * PCI_ANY_ID. Some of these devices, however, also feature a parallel port, 565 * and should be left free to be claimed by parport_serial instead. 566 */ 567 static int pci_timedia_probe(struct pci_dev *dev) 568 { 569 /* 570 * Check the third digit of the subdevice ID 571 * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel) 572 */ 573 if ((dev->subsystem_device & 0x00f0) >= 0x70) { 574 dev_info(&dev->dev, 575 "ignoring Timedia subdevice %04x for parport_serial\n", 576 dev->subsystem_device); 577 return -ENODEV; 578 } 579 580 return 0; 581 } 582 583 static int pci_timedia_init(struct pci_dev *dev) 584 { 585 const unsigned short *ids; 586 int i, j; 587 588 for (i = 0; i < ARRAY_SIZE(timedia_data); i++) { 589 ids = timedia_data[i].ids; 590 for (j = 0; ids[j]; j++) 591 if (dev->subsystem_device == ids[j]) 592 return timedia_data[i].num; 593 } 594 return 0; 595 } 596 597 /* 598 * Timedia/SUNIX uses a mixture of BARs and offsets 599 * Ugh, this is ugly as all hell --- TYT 600 */ 601 static int 602 pci_timedia_setup(struct serial_private *priv, 603 const struct pciserial_board *board, 604 struct uart_8250_port *port, int idx) 605 { 606 unsigned int bar = 0, offset = board->first_offset; 607 608 switch (idx) { 609 case 0: 610 bar = 0; 611 break; 612 case 1: 613 offset = board->uart_offset; 614 bar = 0; 615 break; 616 case 2: 617 bar = 1; 618 break; 619 case 3: 620 offset = board->uart_offset; 621 /* FALLTHROUGH */ 622 case 4: /* BAR 2 */ 623 case 5: /* BAR 3 */ 624 case 6: /* BAR 4 */ 625 case 7: /* BAR 5 */ 626 bar = idx - 2; 627 } 628 629 return setup_port(priv, port, bar, offset, board->reg_shift); 630 } 631 632 /* 633 * Some Titan cards are also a little weird 634 */ 635 static int 636 titan_400l_800l_setup(struct serial_private *priv, 637 const struct pciserial_board *board, 638 struct uart_8250_port *port, int idx) 639 { 640 unsigned int bar, offset = board->first_offset; 641 642 switch (idx) { 643 case 0: 644 bar = 1; 645 break; 646 case 1: 647 bar = 2; 648 break; 649 default: 650 bar = 4; 651 offset = (idx - 2) * board->uart_offset; 652 } 653 654 return setup_port(priv, port, bar, offset, board->reg_shift); 655 } 656 657 static int pci_xircom_init(struct pci_dev *dev) 658 { 659 msleep(100); 660 return 0; 661 } 662 663 static int pci_ni8420_init(struct pci_dev *dev) 664 { 665 void __iomem *p; 666 unsigned int bar = 0; 667 668 if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { 669 moan_device("no memory in bar", dev); 670 return 0; 671 } 672 673 p = pci_ioremap_bar(dev, bar); 674 if (p == NULL) 675 return -ENOMEM; 676 677 /* Enable CPU Interrupt */ 678 writel(readl(p + NI8420_INT_ENABLE_REG) | NI8420_INT_ENABLE_BIT, 679 p + NI8420_INT_ENABLE_REG); 680 681 iounmap(p); 682 return 0; 683 } 684 685 #define MITE_IOWBSR1_WSIZE 0xa 686 #define MITE_IOWBSR1_WIN_OFFSET 0x800 687 #define MITE_IOWBSR1_WENAB (1 << 7) 688 #define MITE_LCIMR1_IO_IE_0 (1 << 24) 689 #define MITE_LCIMR2_SET_CPU_IE (1 << 31) 690 #define MITE_IOWCR1_RAMSEL_MASK 0xfffffffe 691 692 static int pci_ni8430_init(struct pci_dev *dev) 693 { 694 void __iomem *p; 695 struct pci_bus_region region; 696 u32 device_window; 697 unsigned int bar = 0; 698 699 if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { 700 moan_device("no memory in bar", dev); 701 return 0; 702 } 703 704 p = pci_ioremap_bar(dev, bar); 705 if (p == NULL) 706 return -ENOMEM; 707 708 /* 709 * Set device window address and size in BAR0, while acknowledging that 710 * the resource structure may contain a translated address that differs 711 * from the address the device responds to. 712 */ 713 pcibios_resource_to_bus(dev->bus, ®ion, &dev->resource[bar]); 714 device_window = ((region.start + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00) 715 | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE; 716 writel(device_window, p + MITE_IOWBSR1); 717 718 /* Set window access to go to RAMSEL IO address space */ 719 writel((readl(p + MITE_IOWCR1) & MITE_IOWCR1_RAMSEL_MASK), 720 p + MITE_IOWCR1); 721 722 /* Enable IO Bus Interrupt 0 */ 723 writel(MITE_LCIMR1_IO_IE_0, p + MITE_LCIMR1); 724 725 /* Enable CPU Interrupt */ 726 writel(MITE_LCIMR2_SET_CPU_IE, p + MITE_LCIMR2); 727 728 iounmap(p); 729 return 0; 730 } 731 732 /* UART Port Control Register */ 733 #define NI8430_PORTCON 0x0f 734 #define NI8430_PORTCON_TXVR_ENABLE (1 << 3) 735 736 static int 737 pci_ni8430_setup(struct serial_private *priv, 738 const struct pciserial_board *board, 739 struct uart_8250_port *port, int idx) 740 { 741 struct pci_dev *dev = priv->dev; 742 void __iomem *p; 743 unsigned int bar, offset = board->first_offset; 744 745 if (idx >= board->num_ports) 746 return 1; 747 748 bar = FL_GET_BASE(board->flags); 749 offset += idx * board->uart_offset; 750 751 p = pci_ioremap_bar(dev, bar); 752 if (!p) 753 return -ENOMEM; 754 755 /* enable the transceiver */ 756 writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE, 757 p + offset + NI8430_PORTCON); 758 759 iounmap(p); 760 761 return setup_port(priv, port, bar, offset, board->reg_shift); 762 } 763 764 static int pci_netmos_9900_setup(struct serial_private *priv, 765 const struct pciserial_board *board, 766 struct uart_8250_port *port, int idx) 767 { 768 unsigned int bar; 769 770 if ((priv->dev->device != PCI_DEVICE_ID_NETMOS_9865) && 771 (priv->dev->subsystem_device & 0xff00) == 0x3000) { 772 /* netmos apparently orders BARs by datasheet layout, so serial 773 * ports get BARs 0 and 3 (or 1 and 4 for memmapped) 774 */ 775 bar = 3 * idx; 776 777 return setup_port(priv, port, bar, 0, board->reg_shift); 778 } else { 779 return pci_default_setup(priv, board, port, idx); 780 } 781 } 782 783 /* the 99xx series comes with a range of device IDs and a variety 784 * of capabilities: 785 * 786 * 9900 has varying capabilities and can cascade to sub-controllers 787 * (cascading should be purely internal) 788 * 9904 is hardwired with 4 serial ports 789 * 9912 and 9922 are hardwired with 2 serial ports 790 */ 791 static int pci_netmos_9900_numports(struct pci_dev *dev) 792 { 793 unsigned int c = dev->class; 794 unsigned int pi; 795 unsigned short sub_serports; 796 797 pi = c & 0xff; 798 799 if (pi == 2) 800 return 1; 801 802 if ((pi == 0) && (dev->device == PCI_DEVICE_ID_NETMOS_9900)) { 803 /* two possibilities: 0x30ps encodes number of parallel and 804 * serial ports, or 0x1000 indicates *something*. This is not 805 * immediately obvious, since the 2s1p+4s configuration seems 806 * to offer all functionality on functions 0..2, while still 807 * advertising the same function 3 as the 4s+2s1p config. 808 */ 809 sub_serports = dev->subsystem_device & 0xf; 810 if (sub_serports > 0) 811 return sub_serports; 812 813 dev_err(&dev->dev, 814 "NetMos/Mostech serial driver ignoring port on ambiguous config.\n"); 815 return 0; 816 } 817 818 moan_device("unknown NetMos/Mostech program interface", dev); 819 return 0; 820 } 821 822 static int pci_netmos_init(struct pci_dev *dev) 823 { 824 /* subdevice 0x00PS means <P> parallel, <S> serial */ 825 unsigned int num_serial = dev->subsystem_device & 0xf; 826 827 if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) || 828 (dev->device == PCI_DEVICE_ID_NETMOS_9865)) 829 return 0; 830 831 if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && 832 dev->subsystem_device == 0x0299) 833 return 0; 834 835 switch (dev->device) { /* FALLTHROUGH on all */ 836 case PCI_DEVICE_ID_NETMOS_9904: 837 case PCI_DEVICE_ID_NETMOS_9912: 838 case PCI_DEVICE_ID_NETMOS_9922: 839 case PCI_DEVICE_ID_NETMOS_9900: 840 num_serial = pci_netmos_9900_numports(dev); 841 break; 842 843 default: 844 break; 845 } 846 847 if (num_serial == 0) { 848 moan_device("unknown NetMos/Mostech device", dev); 849 return -ENODEV; 850 } 851 852 return num_serial; 853 } 854 855 /* 856 * These chips are available with optionally one parallel port and up to 857 * two serial ports. Unfortunately they all have the same product id. 858 * 859 * Basic configuration is done over a region of 32 I/O ports. The base 860 * ioport is called INTA or INTC, depending on docs/other drivers. 861 * 862 * The region of the 32 I/O ports is configured in POSIO0R... 863 */ 864 865 /* registers */ 866 #define ITE_887x_MISCR 0x9c 867 #define ITE_887x_INTCBAR 0x78 868 #define ITE_887x_UARTBAR 0x7c 869 #define ITE_887x_PS0BAR 0x10 870 #define ITE_887x_POSIO0 0x60 871 872 /* I/O space size */ 873 #define ITE_887x_IOSIZE 32 874 /* I/O space size (bits 26-24; 8 bytes = 011b) */ 875 #define ITE_887x_POSIO_IOSIZE_8 (3 << 24) 876 /* I/O space size (bits 26-24; 32 bytes = 101b) */ 877 #define ITE_887x_POSIO_IOSIZE_32 (5 << 24) 878 /* Decoding speed (1 = slow, 2 = medium, 3 = fast) */ 879 #define ITE_887x_POSIO_SPEED (3 << 29) 880 /* enable IO_Space bit */ 881 #define ITE_887x_POSIO_ENABLE (1 << 31) 882 883 static int pci_ite887x_init(struct pci_dev *dev) 884 { 885 /* inta_addr are the configuration addresses of the ITE */ 886 static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0, 887 0x200, 0x280, 0 }; 888 int ret, i, type; 889 struct resource *iobase = NULL; 890 u32 miscr, uartbar, ioport; 891 892 /* search for the base-ioport */ 893 i = 0; 894 while (inta_addr[i] && iobase == NULL) { 895 iobase = request_region(inta_addr[i], ITE_887x_IOSIZE, 896 "ite887x"); 897 if (iobase != NULL) { 898 /* write POSIO0R - speed | size | ioport */ 899 pci_write_config_dword(dev, ITE_887x_POSIO0, 900 ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | 901 ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]); 902 /* write INTCBAR - ioport */ 903 pci_write_config_dword(dev, ITE_887x_INTCBAR, 904 inta_addr[i]); 905 ret = inb(inta_addr[i]); 906 if (ret != 0xff) { 907 /* ioport connected */ 908 break; 909 } 910 release_region(iobase->start, ITE_887x_IOSIZE); 911 iobase = NULL; 912 } 913 i++; 914 } 915 916 if (!inta_addr[i]) { 917 dev_err(&dev->dev, "ite887x: could not find iobase\n"); 918 return -ENODEV; 919 } 920 921 /* start of undocumented type checking (see parport_pc.c) */ 922 type = inb(iobase->start + 0x18) & 0x0f; 923 924 switch (type) { 925 case 0x2: /* ITE8871 (1P) */ 926 case 0xa: /* ITE8875 (1P) */ 927 ret = 0; 928 break; 929 case 0xe: /* ITE8872 (2S1P) */ 930 ret = 2; 931 break; 932 case 0x6: /* ITE8873 (1S) */ 933 ret = 1; 934 break; 935 case 0x8: /* ITE8874 (2S) */ 936 ret = 2; 937 break; 938 default: 939 moan_device("Unknown ITE887x", dev); 940 ret = -ENODEV; 941 } 942 943 /* configure all serial ports */ 944 for (i = 0; i < ret; i++) { 945 /* read the I/O port from the device */ 946 pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)), 947 &ioport); 948 ioport &= 0x0000FF00; /* the actual base address */ 949 pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)), 950 ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | 951 ITE_887x_POSIO_IOSIZE_8 | ioport); 952 953 /* write the ioport to the UARTBAR */ 954 pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar); 955 uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */ 956 uartbar |= (ioport << (16 * i)); /* set the ioport */ 957 pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar); 958 959 /* get current config */ 960 pci_read_config_dword(dev, ITE_887x_MISCR, &miscr); 961 /* disable interrupts (UARTx_Routing[3:0]) */ 962 miscr &= ~(0xf << (12 - 4 * i)); 963 /* activate the UART (UARTx_En) */ 964 miscr |= 1 << (23 - i); 965 /* write new config with activated UART */ 966 pci_write_config_dword(dev, ITE_887x_MISCR, miscr); 967 } 968 969 if (ret <= 0) { 970 /* the device has no UARTs if we get here */ 971 release_region(iobase->start, ITE_887x_IOSIZE); 972 } 973 974 return ret; 975 } 976 977 static void pci_ite887x_exit(struct pci_dev *dev) 978 { 979 u32 ioport; 980 /* the ioport is bit 0-15 in POSIO0R */ 981 pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport); 982 ioport &= 0xffff; 983 release_region(ioport, ITE_887x_IOSIZE); 984 } 985 986 /* 987 * EndRun Technologies. 988 * Determine the number of ports available on the device. 989 */ 990 #define PCI_VENDOR_ID_ENDRUN 0x7401 991 #define PCI_DEVICE_ID_ENDRUN_1588 0xe100 992 993 static int pci_endrun_init(struct pci_dev *dev) 994 { 995 u8 __iomem *p; 996 unsigned long deviceID; 997 unsigned int number_uarts = 0; 998 999 /* EndRun device is all 0xexxx */ 1000 if (dev->vendor == PCI_VENDOR_ID_ENDRUN && 1001 (dev->device & 0xf000) != 0xe000) 1002 return 0; 1003 1004 p = pci_iomap(dev, 0, 5); 1005 if (p == NULL) 1006 return -ENOMEM; 1007 1008 deviceID = ioread32(p); 1009 /* EndRun device */ 1010 if (deviceID == 0x07000200) { 1011 number_uarts = ioread8(p + 4); 1012 dev_dbg(&dev->dev, 1013 "%d ports detected on EndRun PCI Express device\n", 1014 number_uarts); 1015 } 1016 pci_iounmap(dev, p); 1017 return number_uarts; 1018 } 1019 1020 /* 1021 * Oxford Semiconductor Inc. 1022 * Check that device is part of the Tornado range of devices, then determine 1023 * the number of ports available on the device. 1024 */ 1025 static int pci_oxsemi_tornado_init(struct pci_dev *dev) 1026 { 1027 u8 __iomem *p; 1028 unsigned long deviceID; 1029 unsigned int number_uarts = 0; 1030 1031 /* OxSemi Tornado devices are all 0xCxxx */ 1032 if (dev->vendor == PCI_VENDOR_ID_OXSEMI && 1033 (dev->device & 0xF000) != 0xC000) 1034 return 0; 1035 1036 p = pci_iomap(dev, 0, 5); 1037 if (p == NULL) 1038 return -ENOMEM; 1039 1040 deviceID = ioread32(p); 1041 /* Tornado device */ 1042 if (deviceID == 0x07000200) { 1043 number_uarts = ioread8(p + 4); 1044 dev_dbg(&dev->dev, 1045 "%d ports detected on Oxford PCI Express device\n", 1046 number_uarts); 1047 } 1048 pci_iounmap(dev, p); 1049 return number_uarts; 1050 } 1051 1052 static int pci_asix_setup(struct serial_private *priv, 1053 const struct pciserial_board *board, 1054 struct uart_8250_port *port, int idx) 1055 { 1056 port->bugs |= UART_BUG_PARITY; 1057 return pci_default_setup(priv, board, port, idx); 1058 } 1059 1060 /* Quatech devices have their own extra interface features */ 1061 1062 struct quatech_feature { 1063 u16 devid; 1064 bool amcc; 1065 }; 1066 1067 #define QPCR_TEST_FOR1 0x3F 1068 #define QPCR_TEST_GET1 0x00 1069 #define QPCR_TEST_FOR2 0x40 1070 #define QPCR_TEST_GET2 0x40 1071 #define QPCR_TEST_FOR3 0x80 1072 #define QPCR_TEST_GET3 0x40 1073 #define QPCR_TEST_FOR4 0xC0 1074 #define QPCR_TEST_GET4 0x80 1075 1076 #define QOPR_CLOCK_X1 0x0000 1077 #define QOPR_CLOCK_X2 0x0001 1078 #define QOPR_CLOCK_X4 0x0002 1079 #define QOPR_CLOCK_X8 0x0003 1080 #define QOPR_CLOCK_RATE_MASK 0x0003 1081 1082 1083 static struct quatech_feature quatech_cards[] = { 1084 { PCI_DEVICE_ID_QUATECH_QSC100, 1 }, 1085 { PCI_DEVICE_ID_QUATECH_DSC100, 1 }, 1086 { PCI_DEVICE_ID_QUATECH_DSC100E, 0 }, 1087 { PCI_DEVICE_ID_QUATECH_DSC200, 1 }, 1088 { PCI_DEVICE_ID_QUATECH_DSC200E, 0 }, 1089 { PCI_DEVICE_ID_QUATECH_ESC100D, 1 }, 1090 { PCI_DEVICE_ID_QUATECH_ESC100M, 1 }, 1091 { PCI_DEVICE_ID_QUATECH_QSCP100, 1 }, 1092 { PCI_DEVICE_ID_QUATECH_DSCP100, 1 }, 1093 { PCI_DEVICE_ID_QUATECH_QSCP200, 1 }, 1094 { PCI_DEVICE_ID_QUATECH_DSCP200, 1 }, 1095 { PCI_DEVICE_ID_QUATECH_ESCLP100, 0 }, 1096 { PCI_DEVICE_ID_QUATECH_QSCLP100, 0 }, 1097 { PCI_DEVICE_ID_QUATECH_DSCLP100, 0 }, 1098 { PCI_DEVICE_ID_QUATECH_SSCLP100, 0 }, 1099 { PCI_DEVICE_ID_QUATECH_QSCLP200, 0 }, 1100 { PCI_DEVICE_ID_QUATECH_DSCLP200, 0 }, 1101 { PCI_DEVICE_ID_QUATECH_SSCLP200, 0 }, 1102 { PCI_DEVICE_ID_QUATECH_SPPXP_100, 0 }, 1103 { 0, } 1104 }; 1105 1106 static int pci_quatech_amcc(u16 devid) 1107 { 1108 struct quatech_feature *qf = &quatech_cards[0]; 1109 while (qf->devid) { 1110 if (qf->devid == devid) 1111 return qf->amcc; 1112 qf++; 1113 } 1114 pr_err("quatech: unknown port type '0x%04X'.\n", devid); 1115 return 0; 1116 }; 1117 1118 static int pci_quatech_rqopr(struct uart_8250_port *port) 1119 { 1120 unsigned long base = port->port.iobase; 1121 u8 LCR, val; 1122 1123 LCR = inb(base + UART_LCR); 1124 outb(0xBF, base + UART_LCR); 1125 val = inb(base + UART_SCR); 1126 outb(LCR, base + UART_LCR); 1127 return val; 1128 } 1129 1130 static void pci_quatech_wqopr(struct uart_8250_port *port, u8 qopr) 1131 { 1132 unsigned long base = port->port.iobase; 1133 u8 LCR; 1134 1135 LCR = inb(base + UART_LCR); 1136 outb(0xBF, base + UART_LCR); 1137 inb(base + UART_SCR); 1138 outb(qopr, base + UART_SCR); 1139 outb(LCR, base + UART_LCR); 1140 } 1141 1142 static int pci_quatech_rqmcr(struct uart_8250_port *port) 1143 { 1144 unsigned long base = port->port.iobase; 1145 u8 LCR, val, qmcr; 1146 1147 LCR = inb(base + UART_LCR); 1148 outb(0xBF, base + UART_LCR); 1149 val = inb(base + UART_SCR); 1150 outb(val | 0x10, base + UART_SCR); 1151 qmcr = inb(base + UART_MCR); 1152 outb(val, base + UART_SCR); 1153 outb(LCR, base + UART_LCR); 1154 1155 return qmcr; 1156 } 1157 1158 static void pci_quatech_wqmcr(struct uart_8250_port *port, u8 qmcr) 1159 { 1160 unsigned long base = port->port.iobase; 1161 u8 LCR, val; 1162 1163 LCR = inb(base + UART_LCR); 1164 outb(0xBF, base + UART_LCR); 1165 val = inb(base + UART_SCR); 1166 outb(val | 0x10, base + UART_SCR); 1167 outb(qmcr, base + UART_MCR); 1168 outb(val, base + UART_SCR); 1169 outb(LCR, base + UART_LCR); 1170 } 1171 1172 static int pci_quatech_has_qmcr(struct uart_8250_port *port) 1173 { 1174 unsigned long base = port->port.iobase; 1175 u8 LCR, val; 1176 1177 LCR = inb(base + UART_LCR); 1178 outb(0xBF, base + UART_LCR); 1179 val = inb(base + UART_SCR); 1180 if (val & 0x20) { 1181 outb(0x80, UART_LCR); 1182 if (!(inb(UART_SCR) & 0x20)) { 1183 outb(LCR, base + UART_LCR); 1184 return 1; 1185 } 1186 } 1187 return 0; 1188 } 1189 1190 static int pci_quatech_test(struct uart_8250_port *port) 1191 { 1192 u8 reg, qopr; 1193 1194 qopr = pci_quatech_rqopr(port); 1195 pci_quatech_wqopr(port, qopr & QPCR_TEST_FOR1); 1196 reg = pci_quatech_rqopr(port) & 0xC0; 1197 if (reg != QPCR_TEST_GET1) 1198 return -EINVAL; 1199 pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR2); 1200 reg = pci_quatech_rqopr(port) & 0xC0; 1201 if (reg != QPCR_TEST_GET2) 1202 return -EINVAL; 1203 pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR3); 1204 reg = pci_quatech_rqopr(port) & 0xC0; 1205 if (reg != QPCR_TEST_GET3) 1206 return -EINVAL; 1207 pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR4); 1208 reg = pci_quatech_rqopr(port) & 0xC0; 1209 if (reg != QPCR_TEST_GET4) 1210 return -EINVAL; 1211 1212 pci_quatech_wqopr(port, qopr); 1213 return 0; 1214 } 1215 1216 static int pci_quatech_clock(struct uart_8250_port *port) 1217 { 1218 u8 qopr, reg, set; 1219 unsigned long clock; 1220 1221 if (pci_quatech_test(port) < 0) 1222 return 1843200; 1223 1224 qopr = pci_quatech_rqopr(port); 1225 1226 pci_quatech_wqopr(port, qopr & ~QOPR_CLOCK_X8); 1227 reg = pci_quatech_rqopr(port); 1228 if (reg & QOPR_CLOCK_X8) { 1229 clock = 1843200; 1230 goto out; 1231 } 1232 pci_quatech_wqopr(port, qopr | QOPR_CLOCK_X8); 1233 reg = pci_quatech_rqopr(port); 1234 if (!(reg & QOPR_CLOCK_X8)) { 1235 clock = 1843200; 1236 goto out; 1237 } 1238 reg &= QOPR_CLOCK_X8; 1239 if (reg == QOPR_CLOCK_X2) { 1240 clock = 3685400; 1241 set = QOPR_CLOCK_X2; 1242 } else if (reg == QOPR_CLOCK_X4) { 1243 clock = 7372800; 1244 set = QOPR_CLOCK_X4; 1245 } else if (reg == QOPR_CLOCK_X8) { 1246 clock = 14745600; 1247 set = QOPR_CLOCK_X8; 1248 } else { 1249 clock = 1843200; 1250 set = QOPR_CLOCK_X1; 1251 } 1252 qopr &= ~QOPR_CLOCK_RATE_MASK; 1253 qopr |= set; 1254 1255 out: 1256 pci_quatech_wqopr(port, qopr); 1257 return clock; 1258 } 1259 1260 static int pci_quatech_rs422(struct uart_8250_port *port) 1261 { 1262 u8 qmcr; 1263 int rs422 = 0; 1264 1265 if (!pci_quatech_has_qmcr(port)) 1266 return 0; 1267 qmcr = pci_quatech_rqmcr(port); 1268 pci_quatech_wqmcr(port, 0xFF); 1269 if (pci_quatech_rqmcr(port)) 1270 rs422 = 1; 1271 pci_quatech_wqmcr(port, qmcr); 1272 return rs422; 1273 } 1274 1275 static int pci_quatech_init(struct pci_dev *dev) 1276 { 1277 if (pci_quatech_amcc(dev->device)) { 1278 unsigned long base = pci_resource_start(dev, 0); 1279 if (base) { 1280 u32 tmp; 1281 1282 outl(inl(base + 0x38) | 0x00002000, base + 0x38); 1283 tmp = inl(base + 0x3c); 1284 outl(tmp | 0x01000000, base + 0x3c); 1285 outl(tmp &= ~0x01000000, base + 0x3c); 1286 } 1287 } 1288 return 0; 1289 } 1290 1291 static int pci_quatech_setup(struct serial_private *priv, 1292 const struct pciserial_board *board, 1293 struct uart_8250_port *port, int idx) 1294 { 1295 /* Needed by pci_quatech calls below */ 1296 port->port.iobase = pci_resource_start(priv->dev, FL_GET_BASE(board->flags)); 1297 /* Set up the clocking */ 1298 port->port.uartclk = pci_quatech_clock(port); 1299 /* For now just warn about RS422 */ 1300 if (pci_quatech_rs422(port)) 1301 pr_warn("quatech: software control of RS422 features not currently supported.\n"); 1302 return pci_default_setup(priv, board, port, idx); 1303 } 1304 1305 static void pci_quatech_exit(struct pci_dev *dev) 1306 { 1307 } 1308 1309 static int pci_default_setup(struct serial_private *priv, 1310 const struct pciserial_board *board, 1311 struct uart_8250_port *port, int idx) 1312 { 1313 unsigned int bar, offset = board->first_offset, maxnr; 1314 1315 bar = FL_GET_BASE(board->flags); 1316 if (board->flags & FL_BASE_BARS) 1317 bar += idx; 1318 else 1319 offset += idx * board->uart_offset; 1320 1321 maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >> 1322 (board->reg_shift + 3); 1323 1324 if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) 1325 return 1; 1326 1327 return setup_port(priv, port, bar, offset, board->reg_shift); 1328 } 1329 1330 static int pci_pericom_setup(struct serial_private *priv, 1331 const struct pciserial_board *board, 1332 struct uart_8250_port *port, int idx) 1333 { 1334 unsigned int bar, offset = board->first_offset, maxnr; 1335 1336 bar = FL_GET_BASE(board->flags); 1337 if (board->flags & FL_BASE_BARS) 1338 bar += idx; 1339 else 1340 offset += idx * board->uart_offset; 1341 1342 if (idx==3) 1343 offset = 0x38; 1344 1345 maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >> 1346 (board->reg_shift + 3); 1347 1348 if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) 1349 return 1; 1350 1351 return setup_port(priv, port, bar, offset, board->reg_shift); 1352 } 1353 1354 static int 1355 ce4100_serial_setup(struct serial_private *priv, 1356 const struct pciserial_board *board, 1357 struct uart_8250_port *port, int idx) 1358 { 1359 int ret; 1360 1361 ret = setup_port(priv, port, idx, 0, board->reg_shift); 1362 port->port.iotype = UPIO_MEM32; 1363 port->port.type = PORT_XSCALE; 1364 port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); 1365 port->port.regshift = 2; 1366 1367 return ret; 1368 } 1369 1370 static int 1371 pci_omegapci_setup(struct serial_private *priv, 1372 const struct pciserial_board *board, 1373 struct uart_8250_port *port, int idx) 1374 { 1375 return setup_port(priv, port, 2, idx * 8, 0); 1376 } 1377 1378 static int 1379 pci_brcm_trumanage_setup(struct serial_private *priv, 1380 const struct pciserial_board *board, 1381 struct uart_8250_port *port, int idx) 1382 { 1383 int ret = pci_default_setup(priv, board, port, idx); 1384 1385 port->port.type = PORT_BRCM_TRUMANAGE; 1386 port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); 1387 return ret; 1388 } 1389 1390 /* RTS will control by MCR if this bit is 0 */ 1391 #define FINTEK_RTS_CONTROL_BY_HW BIT(4) 1392 /* only worked with FINTEK_RTS_CONTROL_BY_HW on */ 1393 #define FINTEK_RTS_INVERT BIT(5) 1394 1395 /* We should do proper H/W transceiver setting before change to RS485 mode */ 1396 static int pci_fintek_rs485_config(struct uart_port *port, 1397 struct serial_rs485 *rs485) 1398 { 1399 struct pci_dev *pci_dev = to_pci_dev(port->dev); 1400 u8 setting; 1401 u8 *index = (u8 *) port->private_data; 1402 1403 pci_read_config_byte(pci_dev, 0x40 + 8 * *index + 7, &setting); 1404 1405 if (!rs485) 1406 rs485 = &port->rs485; 1407 else if (rs485->flags & SER_RS485_ENABLED) 1408 memset(rs485->padding, 0, sizeof(rs485->padding)); 1409 else 1410 memset(rs485, 0, sizeof(*rs485)); 1411 1412 /* F81504/508/512 not support RTS delay before or after send */ 1413 rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND; 1414 1415 if (rs485->flags & SER_RS485_ENABLED) { 1416 /* Enable RTS H/W control mode */ 1417 setting |= FINTEK_RTS_CONTROL_BY_HW; 1418 1419 if (rs485->flags & SER_RS485_RTS_ON_SEND) { 1420 /* RTS driving high on TX */ 1421 setting &= ~FINTEK_RTS_INVERT; 1422 } else { 1423 /* RTS driving low on TX */ 1424 setting |= FINTEK_RTS_INVERT; 1425 } 1426 1427 rs485->delay_rts_after_send = 0; 1428 rs485->delay_rts_before_send = 0; 1429 } else { 1430 /* Disable RTS H/W control mode */ 1431 setting &= ~(FINTEK_RTS_CONTROL_BY_HW | FINTEK_RTS_INVERT); 1432 } 1433 1434 pci_write_config_byte(pci_dev, 0x40 + 8 * *index + 7, setting); 1435 1436 if (rs485 != &port->rs485) 1437 port->rs485 = *rs485; 1438 1439 return 0; 1440 } 1441 1442 static int pci_fintek_setup(struct serial_private *priv, 1443 const struct pciserial_board *board, 1444 struct uart_8250_port *port, int idx) 1445 { 1446 struct pci_dev *pdev = priv->dev; 1447 u8 *data; 1448 u8 config_base; 1449 u16 iobase; 1450 1451 config_base = 0x40 + 0x08 * idx; 1452 1453 /* Get the io address from configuration space */ 1454 pci_read_config_word(pdev, config_base + 4, &iobase); 1455 1456 dev_dbg(&pdev->dev, "%s: idx=%d iobase=0x%x", __func__, idx, iobase); 1457 1458 port->port.iotype = UPIO_PORT; 1459 port->port.iobase = iobase; 1460 port->port.rs485_config = pci_fintek_rs485_config; 1461 1462 data = devm_kzalloc(&pdev->dev, sizeof(u8), GFP_KERNEL); 1463 if (!data) 1464 return -ENOMEM; 1465 1466 /* preserve index in PCI configuration space */ 1467 *data = idx; 1468 port->port.private_data = data; 1469 1470 return 0; 1471 } 1472 1473 static int pci_fintek_init(struct pci_dev *dev) 1474 { 1475 unsigned long iobase; 1476 u32 max_port, i; 1477 resource_size_t bar_data[3]; 1478 u8 config_base; 1479 struct serial_private *priv = pci_get_drvdata(dev); 1480 struct uart_8250_port *port; 1481 1482 if (!(pci_resource_flags(dev, 5) & IORESOURCE_IO) || 1483 !(pci_resource_flags(dev, 4) & IORESOURCE_IO) || 1484 !(pci_resource_flags(dev, 3) & IORESOURCE_IO)) 1485 return -ENODEV; 1486 1487 switch (dev->device) { 1488 case 0x1104: /* 4 ports */ 1489 case 0x1108: /* 8 ports */ 1490 max_port = dev->device & 0xff; 1491 break; 1492 case 0x1112: /* 12 ports */ 1493 max_port = 12; 1494 break; 1495 default: 1496 return -EINVAL; 1497 } 1498 1499 /* Get the io address dispatch from the BIOS */ 1500 bar_data[0] = pci_resource_start(dev, 5); 1501 bar_data[1] = pci_resource_start(dev, 4); 1502 bar_data[2] = pci_resource_start(dev, 3); 1503 1504 for (i = 0; i < max_port; ++i) { 1505 /* UART0 configuration offset start from 0x40 */ 1506 config_base = 0x40 + 0x08 * i; 1507 1508 /* Calculate Real IO Port */ 1509 iobase = (bar_data[i / 4] & 0xffffffe0) + (i % 4) * 8; 1510 1511 /* Enable UART I/O port */ 1512 pci_write_config_byte(dev, config_base + 0x00, 0x01); 1513 1514 /* Select 128-byte FIFO and 8x FIFO threshold */ 1515 pci_write_config_byte(dev, config_base + 0x01, 0x33); 1516 1517 /* LSB UART */ 1518 pci_write_config_byte(dev, config_base + 0x04, 1519 (u8)(iobase & 0xff)); 1520 1521 /* MSB UART */ 1522 pci_write_config_byte(dev, config_base + 0x05, 1523 (u8)((iobase & 0xff00) >> 8)); 1524 1525 pci_write_config_byte(dev, config_base + 0x06, dev->irq); 1526 1527 if (priv) { 1528 /* re-apply RS232/485 mode when 1529 * pciserial_resume_ports() 1530 */ 1531 port = serial8250_get_port(priv->line[i]); 1532 pci_fintek_rs485_config(&port->port, NULL); 1533 } else { 1534 /* First init without port data 1535 * force init to RS232 Mode 1536 */ 1537 pci_write_config_byte(dev, config_base + 0x07, 0x01); 1538 } 1539 } 1540 1541 return max_port; 1542 } 1543 1544 static int skip_tx_en_setup(struct serial_private *priv, 1545 const struct pciserial_board *board, 1546 struct uart_8250_port *port, int idx) 1547 { 1548 port->port.quirks |= UPQ_NO_TXEN_TEST; 1549 dev_dbg(&priv->dev->dev, 1550 "serial8250: skipping TxEn test for device [%04x:%04x] subsystem [%04x:%04x]\n", 1551 priv->dev->vendor, priv->dev->device, 1552 priv->dev->subsystem_vendor, priv->dev->subsystem_device); 1553 1554 return pci_default_setup(priv, board, port, idx); 1555 } 1556 1557 static void kt_handle_break(struct uart_port *p) 1558 { 1559 struct uart_8250_port *up = up_to_u8250p(p); 1560 /* 1561 * On receipt of a BI, serial device in Intel ME (Intel 1562 * management engine) needs to have its fifos cleared for sane 1563 * SOL (Serial Over Lan) output. 1564 */ 1565 serial8250_clear_and_reinit_fifos(up); 1566 } 1567 1568 static unsigned int kt_serial_in(struct uart_port *p, int offset) 1569 { 1570 struct uart_8250_port *up = up_to_u8250p(p); 1571 unsigned int val; 1572 1573 /* 1574 * When the Intel ME (management engine) gets reset its serial 1575 * port registers could return 0 momentarily. Functions like 1576 * serial8250_console_write, read and save the IER, perform 1577 * some operation and then restore it. In order to avoid 1578 * setting IER register inadvertently to 0, if the value read 1579 * is 0, double check with ier value in uart_8250_port and use 1580 * that instead. up->ier should be the same value as what is 1581 * currently configured. 1582 */ 1583 val = inb(p->iobase + offset); 1584 if (offset == UART_IER) { 1585 if (val == 0) 1586 val = up->ier; 1587 } 1588 return val; 1589 } 1590 1591 static int kt_serial_setup(struct serial_private *priv, 1592 const struct pciserial_board *board, 1593 struct uart_8250_port *port, int idx) 1594 { 1595 port->port.flags |= UPF_BUG_THRE; 1596 port->port.serial_in = kt_serial_in; 1597 port->port.handle_break = kt_handle_break; 1598 return skip_tx_en_setup(priv, board, port, idx); 1599 } 1600 1601 static int pci_eg20t_init(struct pci_dev *dev) 1602 { 1603 #if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE) 1604 return -ENODEV; 1605 #else 1606 return 0; 1607 #endif 1608 } 1609 1610 static int 1611 pci_wch_ch353_setup(struct serial_private *priv, 1612 const struct pciserial_board *board, 1613 struct uart_8250_port *port, int idx) 1614 { 1615 port->port.flags |= UPF_FIXED_TYPE; 1616 port->port.type = PORT_16550A; 1617 return pci_default_setup(priv, board, port, idx); 1618 } 1619 1620 static int 1621 pci_wch_ch355_setup(struct serial_private *priv, 1622 const struct pciserial_board *board, 1623 struct uart_8250_port *port, int idx) 1624 { 1625 port->port.flags |= UPF_FIXED_TYPE; 1626 port->port.type = PORT_16550A; 1627 return pci_default_setup(priv, board, port, idx); 1628 } 1629 1630 static int 1631 pci_wch_ch38x_setup(struct serial_private *priv, 1632 const struct pciserial_board *board, 1633 struct uart_8250_port *port, int idx) 1634 { 1635 port->port.flags |= UPF_FIXED_TYPE; 1636 port->port.type = PORT_16850; 1637 return pci_default_setup(priv, board, port, idx); 1638 } 1639 1640 #define PCI_VENDOR_ID_SBSMODULARIO 0x124B 1641 #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B 1642 #define PCI_DEVICE_ID_OCTPRO 0x0001 1643 #define PCI_SUBDEVICE_ID_OCTPRO232 0x0108 1644 #define PCI_SUBDEVICE_ID_OCTPRO422 0x0208 1645 #define PCI_SUBDEVICE_ID_POCTAL232 0x0308 1646 #define PCI_SUBDEVICE_ID_POCTAL422 0x0408 1647 #define PCI_SUBDEVICE_ID_SIIG_DUAL_00 0x2500 1648 #define PCI_SUBDEVICE_ID_SIIG_DUAL_30 0x2530 1649 #define PCI_VENDOR_ID_ADVANTECH 0x13fe 1650 #define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66 1651 #define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620 1652 #define PCI_DEVICE_ID_ADVANTECH_PCI3618 0x3618 1653 #define PCI_DEVICE_ID_ADVANTECH_PCIf618 0xf618 1654 #define PCI_DEVICE_ID_TITAN_200I 0x8028 1655 #define PCI_DEVICE_ID_TITAN_400I 0x8048 1656 #define PCI_DEVICE_ID_TITAN_800I 0x8088 1657 #define PCI_DEVICE_ID_TITAN_800EH 0xA007 1658 #define PCI_DEVICE_ID_TITAN_800EHB 0xA008 1659 #define PCI_DEVICE_ID_TITAN_400EH 0xA009 1660 #define PCI_DEVICE_ID_TITAN_100E 0xA010 1661 #define PCI_DEVICE_ID_TITAN_200E 0xA012 1662 #define PCI_DEVICE_ID_TITAN_400E 0xA013 1663 #define PCI_DEVICE_ID_TITAN_800E 0xA014 1664 #define PCI_DEVICE_ID_TITAN_200EI 0xA016 1665 #define PCI_DEVICE_ID_TITAN_200EISI 0xA017 1666 #define PCI_DEVICE_ID_TITAN_200V3 0xA306 1667 #define PCI_DEVICE_ID_TITAN_400V3 0xA310 1668 #define PCI_DEVICE_ID_TITAN_410V3 0xA312 1669 #define PCI_DEVICE_ID_TITAN_800V3 0xA314 1670 #define PCI_DEVICE_ID_TITAN_800V3B 0xA315 1671 #define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 1672 #define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6 1673 #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 1674 #define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d 1675 #define PCI_VENDOR_ID_WCH 0x4348 1676 #define PCI_DEVICE_ID_WCH_CH352_2S 0x3253 1677 #define PCI_DEVICE_ID_WCH_CH353_4S 0x3453 1678 #define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046 1679 #define PCI_DEVICE_ID_WCH_CH353_1S1P 0x5053 1680 #define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053 1681 #define PCI_DEVICE_ID_WCH_CH355_4S 0x7173 1682 #define PCI_VENDOR_ID_AGESTAR 0x5372 1683 #define PCI_DEVICE_ID_AGESTAR_9375 0x6872 1684 #define PCI_VENDOR_ID_ASIX 0x9710 1685 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a 1686 #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e 1687 1688 #define PCIE_VENDOR_ID_WCH 0x1c00 1689 #define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250 1690 #define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470 1691 #define PCIE_DEVICE_ID_WCH_CH382_2S 0x3253 1692 1693 #define PCI_VENDOR_ID_PERICOM 0x12D8 1694 #define PCI_DEVICE_ID_PERICOM_PI7C9X7951 0x7951 1695 #define PCI_DEVICE_ID_PERICOM_PI7C9X7952 0x7952 1696 #define PCI_DEVICE_ID_PERICOM_PI7C9X7954 0x7954 1697 #define PCI_DEVICE_ID_PERICOM_PI7C9X7958 0x7958 1698 1699 #define PCI_VENDOR_ID_ACCESIO 0x494f 1700 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB 0x1051 1701 #define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S 0x1053 1702 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB 0x105C 1703 #define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S 0x105E 1704 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB 0x1091 1705 #define PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2 0x1093 1706 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB 0x1099 1707 #define PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4 0x109B 1708 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB 0x10D1 1709 #define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM 0x10D3 1710 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB 0x10DA 1711 #define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM 0x10DC 1712 #define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1 0x1108 1713 #define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2 0x1110 1714 #define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2 0x1111 1715 #define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4 0x1118 1716 #define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4 0x1119 1717 #define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S 0x1152 1718 #define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S 0x115A 1719 #define PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2 0x1190 1720 #define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2 0x1191 1721 #define PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4 0x1198 1722 #define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4 0x1199 1723 #define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM 0x11D0 1724 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4 0x105A 1725 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4 0x105B 1726 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8 0x106A 1727 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM485_8 0x106B 1728 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4 0x1098 1729 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8 0x10A9 1730 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM 0x10D9 1731 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM 0x10E9 1732 #define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM 0x11D8 1733 1734 1735 1736 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ 1737 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 1738 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588 1739 1740 /* 1741 * Master list of serial port init/setup/exit quirks. 1742 * This does not describe the general nature of the port. 1743 * (ie, baud base, number and location of ports, etc) 1744 * 1745 * This list is ordered alphabetically by vendor then device. 1746 * Specific entries must come before more generic entries. 1747 */ 1748 static struct pci_serial_quirk pci_serial_quirks[] __refdata = { 1749 /* 1750 * ADDI-DATA GmbH communication cards <info@addi-data.com> 1751 */ 1752 { 1753 .vendor = PCI_VENDOR_ID_AMCC, 1754 .device = PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800, 1755 .subvendor = PCI_ANY_ID, 1756 .subdevice = PCI_ANY_ID, 1757 .setup = addidata_apci7800_setup, 1758 }, 1759 /* 1760 * AFAVLAB cards - these may be called via parport_serial 1761 * It is not clear whether this applies to all products. 1762 */ 1763 { 1764 .vendor = PCI_VENDOR_ID_AFAVLAB, 1765 .device = PCI_ANY_ID, 1766 .subvendor = PCI_ANY_ID, 1767 .subdevice = PCI_ANY_ID, 1768 .setup = afavlab_setup, 1769 }, 1770 /* 1771 * HP Diva 1772 */ 1773 { 1774 .vendor = PCI_VENDOR_ID_HP, 1775 .device = PCI_DEVICE_ID_HP_DIVA, 1776 .subvendor = PCI_ANY_ID, 1777 .subdevice = PCI_ANY_ID, 1778 .init = pci_hp_diva_init, 1779 .setup = pci_hp_diva_setup, 1780 }, 1781 /* 1782 * Intel 1783 */ 1784 { 1785 .vendor = PCI_VENDOR_ID_INTEL, 1786 .device = PCI_DEVICE_ID_INTEL_80960_RP, 1787 .subvendor = 0xe4bf, 1788 .subdevice = PCI_ANY_ID, 1789 .init = pci_inteli960ni_init, 1790 .setup = pci_default_setup, 1791 }, 1792 { 1793 .vendor = PCI_VENDOR_ID_INTEL, 1794 .device = PCI_DEVICE_ID_INTEL_8257X_SOL, 1795 .subvendor = PCI_ANY_ID, 1796 .subdevice = PCI_ANY_ID, 1797 .setup = skip_tx_en_setup, 1798 }, 1799 { 1800 .vendor = PCI_VENDOR_ID_INTEL, 1801 .device = PCI_DEVICE_ID_INTEL_82573L_SOL, 1802 .subvendor = PCI_ANY_ID, 1803 .subdevice = PCI_ANY_ID, 1804 .setup = skip_tx_en_setup, 1805 }, 1806 { 1807 .vendor = PCI_VENDOR_ID_INTEL, 1808 .device = PCI_DEVICE_ID_INTEL_82573E_SOL, 1809 .subvendor = PCI_ANY_ID, 1810 .subdevice = PCI_ANY_ID, 1811 .setup = skip_tx_en_setup, 1812 }, 1813 { 1814 .vendor = PCI_VENDOR_ID_INTEL, 1815 .device = PCI_DEVICE_ID_INTEL_CE4100_UART, 1816 .subvendor = PCI_ANY_ID, 1817 .subdevice = PCI_ANY_ID, 1818 .setup = ce4100_serial_setup, 1819 }, 1820 { 1821 .vendor = PCI_VENDOR_ID_INTEL, 1822 .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT, 1823 .subvendor = PCI_ANY_ID, 1824 .subdevice = PCI_ANY_ID, 1825 .setup = kt_serial_setup, 1826 }, 1827 /* 1828 * ITE 1829 */ 1830 { 1831 .vendor = PCI_VENDOR_ID_ITE, 1832 .device = PCI_DEVICE_ID_ITE_8872, 1833 .subvendor = PCI_ANY_ID, 1834 .subdevice = PCI_ANY_ID, 1835 .init = pci_ite887x_init, 1836 .setup = pci_default_setup, 1837 .exit = pci_ite887x_exit, 1838 }, 1839 /* 1840 * National Instruments 1841 */ 1842 { 1843 .vendor = PCI_VENDOR_ID_NI, 1844 .device = PCI_DEVICE_ID_NI_PCI23216, 1845 .subvendor = PCI_ANY_ID, 1846 .subdevice = PCI_ANY_ID, 1847 .init = pci_ni8420_init, 1848 .setup = pci_default_setup, 1849 .exit = pci_ni8420_exit, 1850 }, 1851 { 1852 .vendor = PCI_VENDOR_ID_NI, 1853 .device = PCI_DEVICE_ID_NI_PCI2328, 1854 .subvendor = PCI_ANY_ID, 1855 .subdevice = PCI_ANY_ID, 1856 .init = pci_ni8420_init, 1857 .setup = pci_default_setup, 1858 .exit = pci_ni8420_exit, 1859 }, 1860 { 1861 .vendor = PCI_VENDOR_ID_NI, 1862 .device = PCI_DEVICE_ID_NI_PCI2324, 1863 .subvendor = PCI_ANY_ID, 1864 .subdevice = PCI_ANY_ID, 1865 .init = pci_ni8420_init, 1866 .setup = pci_default_setup, 1867 .exit = pci_ni8420_exit, 1868 }, 1869 { 1870 .vendor = PCI_VENDOR_ID_NI, 1871 .device = PCI_DEVICE_ID_NI_PCI2322, 1872 .subvendor = PCI_ANY_ID, 1873 .subdevice = PCI_ANY_ID, 1874 .init = pci_ni8420_init, 1875 .setup = pci_default_setup, 1876 .exit = pci_ni8420_exit, 1877 }, 1878 { 1879 .vendor = PCI_VENDOR_ID_NI, 1880 .device = PCI_DEVICE_ID_NI_PCI2324I, 1881 .subvendor = PCI_ANY_ID, 1882 .subdevice = PCI_ANY_ID, 1883 .init = pci_ni8420_init, 1884 .setup = pci_default_setup, 1885 .exit = pci_ni8420_exit, 1886 }, 1887 { 1888 .vendor = PCI_VENDOR_ID_NI, 1889 .device = PCI_DEVICE_ID_NI_PCI2322I, 1890 .subvendor = PCI_ANY_ID, 1891 .subdevice = PCI_ANY_ID, 1892 .init = pci_ni8420_init, 1893 .setup = pci_default_setup, 1894 .exit = pci_ni8420_exit, 1895 }, 1896 { 1897 .vendor = PCI_VENDOR_ID_NI, 1898 .device = PCI_DEVICE_ID_NI_PXI8420_23216, 1899 .subvendor = PCI_ANY_ID, 1900 .subdevice = PCI_ANY_ID, 1901 .init = pci_ni8420_init, 1902 .setup = pci_default_setup, 1903 .exit = pci_ni8420_exit, 1904 }, 1905 { 1906 .vendor = PCI_VENDOR_ID_NI, 1907 .device = PCI_DEVICE_ID_NI_PXI8420_2328, 1908 .subvendor = PCI_ANY_ID, 1909 .subdevice = PCI_ANY_ID, 1910 .init = pci_ni8420_init, 1911 .setup = pci_default_setup, 1912 .exit = pci_ni8420_exit, 1913 }, 1914 { 1915 .vendor = PCI_VENDOR_ID_NI, 1916 .device = PCI_DEVICE_ID_NI_PXI8420_2324, 1917 .subvendor = PCI_ANY_ID, 1918 .subdevice = PCI_ANY_ID, 1919 .init = pci_ni8420_init, 1920 .setup = pci_default_setup, 1921 .exit = pci_ni8420_exit, 1922 }, 1923 { 1924 .vendor = PCI_VENDOR_ID_NI, 1925 .device = PCI_DEVICE_ID_NI_PXI8420_2322, 1926 .subvendor = PCI_ANY_ID, 1927 .subdevice = PCI_ANY_ID, 1928 .init = pci_ni8420_init, 1929 .setup = pci_default_setup, 1930 .exit = pci_ni8420_exit, 1931 }, 1932 { 1933 .vendor = PCI_VENDOR_ID_NI, 1934 .device = PCI_DEVICE_ID_NI_PXI8422_2324, 1935 .subvendor = PCI_ANY_ID, 1936 .subdevice = PCI_ANY_ID, 1937 .init = pci_ni8420_init, 1938 .setup = pci_default_setup, 1939 .exit = pci_ni8420_exit, 1940 }, 1941 { 1942 .vendor = PCI_VENDOR_ID_NI, 1943 .device = PCI_DEVICE_ID_NI_PXI8422_2322, 1944 .subvendor = PCI_ANY_ID, 1945 .subdevice = PCI_ANY_ID, 1946 .init = pci_ni8420_init, 1947 .setup = pci_default_setup, 1948 .exit = pci_ni8420_exit, 1949 }, 1950 { 1951 .vendor = PCI_VENDOR_ID_NI, 1952 .device = PCI_ANY_ID, 1953 .subvendor = PCI_ANY_ID, 1954 .subdevice = PCI_ANY_ID, 1955 .init = pci_ni8430_init, 1956 .setup = pci_ni8430_setup, 1957 .exit = pci_ni8430_exit, 1958 }, 1959 /* Quatech */ 1960 { 1961 .vendor = PCI_VENDOR_ID_QUATECH, 1962 .device = PCI_ANY_ID, 1963 .subvendor = PCI_ANY_ID, 1964 .subdevice = PCI_ANY_ID, 1965 .init = pci_quatech_init, 1966 .setup = pci_quatech_setup, 1967 .exit = pci_quatech_exit, 1968 }, 1969 /* 1970 * Panacom 1971 */ 1972 { 1973 .vendor = PCI_VENDOR_ID_PANACOM, 1974 .device = PCI_DEVICE_ID_PANACOM_QUADMODEM, 1975 .subvendor = PCI_ANY_ID, 1976 .subdevice = PCI_ANY_ID, 1977 .init = pci_plx9050_init, 1978 .setup = pci_default_setup, 1979 .exit = pci_plx9050_exit, 1980 }, 1981 { 1982 .vendor = PCI_VENDOR_ID_PANACOM, 1983 .device = PCI_DEVICE_ID_PANACOM_DUALMODEM, 1984 .subvendor = PCI_ANY_ID, 1985 .subdevice = PCI_ANY_ID, 1986 .init = pci_plx9050_init, 1987 .setup = pci_default_setup, 1988 .exit = pci_plx9050_exit, 1989 }, 1990 /* 1991 * Pericom (Only 7954 - It have a offset jump for port 4) 1992 */ 1993 { 1994 .vendor = PCI_VENDOR_ID_PERICOM, 1995 .device = PCI_DEVICE_ID_PERICOM_PI7C9X7954, 1996 .subvendor = PCI_ANY_ID, 1997 .subdevice = PCI_ANY_ID, 1998 .setup = pci_pericom_setup, 1999 }, 2000 /* 2001 * PLX 2002 */ 2003 { 2004 .vendor = PCI_VENDOR_ID_PLX, 2005 .device = PCI_DEVICE_ID_PLX_9050, 2006 .subvendor = PCI_SUBVENDOR_ID_EXSYS, 2007 .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055, 2008 .init = pci_plx9050_init, 2009 .setup = pci_default_setup, 2010 .exit = pci_plx9050_exit, 2011 }, 2012 { 2013 .vendor = PCI_VENDOR_ID_PLX, 2014 .device = PCI_DEVICE_ID_PLX_9050, 2015 .subvendor = PCI_SUBVENDOR_ID_KEYSPAN, 2016 .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2, 2017 .init = pci_plx9050_init, 2018 .setup = pci_default_setup, 2019 .exit = pci_plx9050_exit, 2020 }, 2021 { 2022 .vendor = PCI_VENDOR_ID_PLX, 2023 .device = PCI_DEVICE_ID_PLX_ROMULUS, 2024 .subvendor = PCI_VENDOR_ID_PLX, 2025 .subdevice = PCI_DEVICE_ID_PLX_ROMULUS, 2026 .init = pci_plx9050_init, 2027 .setup = pci_default_setup, 2028 .exit = pci_plx9050_exit, 2029 }, 2030 /* 2031 * SBS Technologies, Inc., PMC-OCTALPRO 232 2032 */ 2033 { 2034 .vendor = PCI_VENDOR_ID_SBSMODULARIO, 2035 .device = PCI_DEVICE_ID_OCTPRO, 2036 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, 2037 .subdevice = PCI_SUBDEVICE_ID_OCTPRO232, 2038 .init = sbs_init, 2039 .setup = sbs_setup, 2040 .exit = sbs_exit, 2041 }, 2042 /* 2043 * SBS Technologies, Inc., PMC-OCTALPRO 422 2044 */ 2045 { 2046 .vendor = PCI_VENDOR_ID_SBSMODULARIO, 2047 .device = PCI_DEVICE_ID_OCTPRO, 2048 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, 2049 .subdevice = PCI_SUBDEVICE_ID_OCTPRO422, 2050 .init = sbs_init, 2051 .setup = sbs_setup, 2052 .exit = sbs_exit, 2053 }, 2054 /* 2055 * SBS Technologies, Inc., P-Octal 232 2056 */ 2057 { 2058 .vendor = PCI_VENDOR_ID_SBSMODULARIO, 2059 .device = PCI_DEVICE_ID_OCTPRO, 2060 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, 2061 .subdevice = PCI_SUBDEVICE_ID_POCTAL232, 2062 .init = sbs_init, 2063 .setup = sbs_setup, 2064 .exit = sbs_exit, 2065 }, 2066 /* 2067 * SBS Technologies, Inc., P-Octal 422 2068 */ 2069 { 2070 .vendor = PCI_VENDOR_ID_SBSMODULARIO, 2071 .device = PCI_DEVICE_ID_OCTPRO, 2072 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, 2073 .subdevice = PCI_SUBDEVICE_ID_POCTAL422, 2074 .init = sbs_init, 2075 .setup = sbs_setup, 2076 .exit = sbs_exit, 2077 }, 2078 /* 2079 * SIIG cards - these may be called via parport_serial 2080 */ 2081 { 2082 .vendor = PCI_VENDOR_ID_SIIG, 2083 .device = PCI_ANY_ID, 2084 .subvendor = PCI_ANY_ID, 2085 .subdevice = PCI_ANY_ID, 2086 .init = pci_siig_init, 2087 .setup = pci_siig_setup, 2088 }, 2089 /* 2090 * Titan cards 2091 */ 2092 { 2093 .vendor = PCI_VENDOR_ID_TITAN, 2094 .device = PCI_DEVICE_ID_TITAN_400L, 2095 .subvendor = PCI_ANY_ID, 2096 .subdevice = PCI_ANY_ID, 2097 .setup = titan_400l_800l_setup, 2098 }, 2099 { 2100 .vendor = PCI_VENDOR_ID_TITAN, 2101 .device = PCI_DEVICE_ID_TITAN_800L, 2102 .subvendor = PCI_ANY_ID, 2103 .subdevice = PCI_ANY_ID, 2104 .setup = titan_400l_800l_setup, 2105 }, 2106 /* 2107 * Timedia cards 2108 */ 2109 { 2110 .vendor = PCI_VENDOR_ID_TIMEDIA, 2111 .device = PCI_DEVICE_ID_TIMEDIA_1889, 2112 .subvendor = PCI_VENDOR_ID_TIMEDIA, 2113 .subdevice = PCI_ANY_ID, 2114 .probe = pci_timedia_probe, 2115 .init = pci_timedia_init, 2116 .setup = pci_timedia_setup, 2117 }, 2118 { 2119 .vendor = PCI_VENDOR_ID_TIMEDIA, 2120 .device = PCI_ANY_ID, 2121 .subvendor = PCI_ANY_ID, 2122 .subdevice = PCI_ANY_ID, 2123 .setup = pci_timedia_setup, 2124 }, 2125 /* 2126 * SUNIX (Timedia) cards 2127 * Do not "probe" for these cards as there is at least one combination 2128 * card that should be handled by parport_pc that doesn't match the 2129 * rule in pci_timedia_probe. 2130 * It is part number is MIO5079A but its subdevice ID is 0x0102. 2131 * There are some boards with part number SER5037AL that report 2132 * subdevice ID 0x0002. 2133 */ 2134 { 2135 .vendor = PCI_VENDOR_ID_SUNIX, 2136 .device = PCI_DEVICE_ID_SUNIX_1999, 2137 .subvendor = PCI_VENDOR_ID_SUNIX, 2138 .subdevice = PCI_ANY_ID, 2139 .init = pci_timedia_init, 2140 .setup = pci_timedia_setup, 2141 }, 2142 /* 2143 * Xircom cards 2144 */ 2145 { 2146 .vendor = PCI_VENDOR_ID_XIRCOM, 2147 .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM, 2148 .subvendor = PCI_ANY_ID, 2149 .subdevice = PCI_ANY_ID, 2150 .init = pci_xircom_init, 2151 .setup = pci_default_setup, 2152 }, 2153 /* 2154 * Netmos cards - these may be called via parport_serial 2155 */ 2156 { 2157 .vendor = PCI_VENDOR_ID_NETMOS, 2158 .device = PCI_ANY_ID, 2159 .subvendor = PCI_ANY_ID, 2160 .subdevice = PCI_ANY_ID, 2161 .init = pci_netmos_init, 2162 .setup = pci_netmos_9900_setup, 2163 }, 2164 /* 2165 * EndRun Technologies 2166 */ 2167 { 2168 .vendor = PCI_VENDOR_ID_ENDRUN, 2169 .device = PCI_ANY_ID, 2170 .subvendor = PCI_ANY_ID, 2171 .subdevice = PCI_ANY_ID, 2172 .init = pci_endrun_init, 2173 .setup = pci_default_setup, 2174 }, 2175 /* 2176 * For Oxford Semiconductor Tornado based devices 2177 */ 2178 { 2179 .vendor = PCI_VENDOR_ID_OXSEMI, 2180 .device = PCI_ANY_ID, 2181 .subvendor = PCI_ANY_ID, 2182 .subdevice = PCI_ANY_ID, 2183 .init = pci_oxsemi_tornado_init, 2184 .setup = pci_default_setup, 2185 }, 2186 { 2187 .vendor = PCI_VENDOR_ID_MAINPINE, 2188 .device = PCI_ANY_ID, 2189 .subvendor = PCI_ANY_ID, 2190 .subdevice = PCI_ANY_ID, 2191 .init = pci_oxsemi_tornado_init, 2192 .setup = pci_default_setup, 2193 }, 2194 { 2195 .vendor = PCI_VENDOR_ID_DIGI, 2196 .device = PCIE_DEVICE_ID_NEO_2_OX_IBM, 2197 .subvendor = PCI_SUBVENDOR_ID_IBM, 2198 .subdevice = PCI_ANY_ID, 2199 .init = pci_oxsemi_tornado_init, 2200 .setup = pci_default_setup, 2201 }, 2202 { 2203 .vendor = PCI_VENDOR_ID_INTEL, 2204 .device = 0x8811, 2205 .subvendor = PCI_ANY_ID, 2206 .subdevice = PCI_ANY_ID, 2207 .init = pci_eg20t_init, 2208 .setup = pci_default_setup, 2209 }, 2210 { 2211 .vendor = PCI_VENDOR_ID_INTEL, 2212 .device = 0x8812, 2213 .subvendor = PCI_ANY_ID, 2214 .subdevice = PCI_ANY_ID, 2215 .init = pci_eg20t_init, 2216 .setup = pci_default_setup, 2217 }, 2218 { 2219 .vendor = PCI_VENDOR_ID_INTEL, 2220 .device = 0x8813, 2221 .subvendor = PCI_ANY_ID, 2222 .subdevice = PCI_ANY_ID, 2223 .init = pci_eg20t_init, 2224 .setup = pci_default_setup, 2225 }, 2226 { 2227 .vendor = PCI_VENDOR_ID_INTEL, 2228 .device = 0x8814, 2229 .subvendor = PCI_ANY_ID, 2230 .subdevice = PCI_ANY_ID, 2231 .init = pci_eg20t_init, 2232 .setup = pci_default_setup, 2233 }, 2234 { 2235 .vendor = 0x10DB, 2236 .device = 0x8027, 2237 .subvendor = PCI_ANY_ID, 2238 .subdevice = PCI_ANY_ID, 2239 .init = pci_eg20t_init, 2240 .setup = pci_default_setup, 2241 }, 2242 { 2243 .vendor = 0x10DB, 2244 .device = 0x8028, 2245 .subvendor = PCI_ANY_ID, 2246 .subdevice = PCI_ANY_ID, 2247 .init = pci_eg20t_init, 2248 .setup = pci_default_setup, 2249 }, 2250 { 2251 .vendor = 0x10DB, 2252 .device = 0x8029, 2253 .subvendor = PCI_ANY_ID, 2254 .subdevice = PCI_ANY_ID, 2255 .init = pci_eg20t_init, 2256 .setup = pci_default_setup, 2257 }, 2258 { 2259 .vendor = 0x10DB, 2260 .device = 0x800C, 2261 .subvendor = PCI_ANY_ID, 2262 .subdevice = PCI_ANY_ID, 2263 .init = pci_eg20t_init, 2264 .setup = pci_default_setup, 2265 }, 2266 { 2267 .vendor = 0x10DB, 2268 .device = 0x800D, 2269 .subvendor = PCI_ANY_ID, 2270 .subdevice = PCI_ANY_ID, 2271 .init = pci_eg20t_init, 2272 .setup = pci_default_setup, 2273 }, 2274 /* 2275 * Cronyx Omega PCI (PLX-chip based) 2276 */ 2277 { 2278 .vendor = PCI_VENDOR_ID_PLX, 2279 .device = PCI_DEVICE_ID_PLX_CRONYX_OMEGA, 2280 .subvendor = PCI_ANY_ID, 2281 .subdevice = PCI_ANY_ID, 2282 .setup = pci_omegapci_setup, 2283 }, 2284 /* WCH CH353 1S1P card (16550 clone) */ 2285 { 2286 .vendor = PCI_VENDOR_ID_WCH, 2287 .device = PCI_DEVICE_ID_WCH_CH353_1S1P, 2288 .subvendor = PCI_ANY_ID, 2289 .subdevice = PCI_ANY_ID, 2290 .setup = pci_wch_ch353_setup, 2291 }, 2292 /* WCH CH353 2S1P card (16550 clone) */ 2293 { 2294 .vendor = PCI_VENDOR_ID_WCH, 2295 .device = PCI_DEVICE_ID_WCH_CH353_2S1P, 2296 .subvendor = PCI_ANY_ID, 2297 .subdevice = PCI_ANY_ID, 2298 .setup = pci_wch_ch353_setup, 2299 }, 2300 /* WCH CH353 4S card (16550 clone) */ 2301 { 2302 .vendor = PCI_VENDOR_ID_WCH, 2303 .device = PCI_DEVICE_ID_WCH_CH353_4S, 2304 .subvendor = PCI_ANY_ID, 2305 .subdevice = PCI_ANY_ID, 2306 .setup = pci_wch_ch353_setup, 2307 }, 2308 /* WCH CH353 2S1PF card (16550 clone) */ 2309 { 2310 .vendor = PCI_VENDOR_ID_WCH, 2311 .device = PCI_DEVICE_ID_WCH_CH353_2S1PF, 2312 .subvendor = PCI_ANY_ID, 2313 .subdevice = PCI_ANY_ID, 2314 .setup = pci_wch_ch353_setup, 2315 }, 2316 /* WCH CH352 2S card (16550 clone) */ 2317 { 2318 .vendor = PCI_VENDOR_ID_WCH, 2319 .device = PCI_DEVICE_ID_WCH_CH352_2S, 2320 .subvendor = PCI_ANY_ID, 2321 .subdevice = PCI_ANY_ID, 2322 .setup = pci_wch_ch353_setup, 2323 }, 2324 /* WCH CH355 4S card (16550 clone) */ 2325 { 2326 .vendor = PCI_VENDOR_ID_WCH, 2327 .device = PCI_DEVICE_ID_WCH_CH355_4S, 2328 .subvendor = PCI_ANY_ID, 2329 .subdevice = PCI_ANY_ID, 2330 .setup = pci_wch_ch355_setup, 2331 }, 2332 /* WCH CH382 2S card (16850 clone) */ 2333 { 2334 .vendor = PCIE_VENDOR_ID_WCH, 2335 .device = PCIE_DEVICE_ID_WCH_CH382_2S, 2336 .subvendor = PCI_ANY_ID, 2337 .subdevice = PCI_ANY_ID, 2338 .setup = pci_wch_ch38x_setup, 2339 }, 2340 /* WCH CH382 2S1P card (16850 clone) */ 2341 { 2342 .vendor = PCIE_VENDOR_ID_WCH, 2343 .device = PCIE_DEVICE_ID_WCH_CH382_2S1P, 2344 .subvendor = PCI_ANY_ID, 2345 .subdevice = PCI_ANY_ID, 2346 .setup = pci_wch_ch38x_setup, 2347 }, 2348 /* WCH CH384 4S card (16850 clone) */ 2349 { 2350 .vendor = PCIE_VENDOR_ID_WCH, 2351 .device = PCIE_DEVICE_ID_WCH_CH384_4S, 2352 .subvendor = PCI_ANY_ID, 2353 .subdevice = PCI_ANY_ID, 2354 .setup = pci_wch_ch38x_setup, 2355 }, 2356 /* 2357 * ASIX devices with FIFO bug 2358 */ 2359 { 2360 .vendor = PCI_VENDOR_ID_ASIX, 2361 .device = PCI_ANY_ID, 2362 .subvendor = PCI_ANY_ID, 2363 .subdevice = PCI_ANY_ID, 2364 .setup = pci_asix_setup, 2365 }, 2366 /* 2367 * Broadcom TruManage (NetXtreme) 2368 */ 2369 { 2370 .vendor = PCI_VENDOR_ID_BROADCOM, 2371 .device = PCI_DEVICE_ID_BROADCOM_TRUMANAGE, 2372 .subvendor = PCI_ANY_ID, 2373 .subdevice = PCI_ANY_ID, 2374 .setup = pci_brcm_trumanage_setup, 2375 }, 2376 { 2377 .vendor = 0x1c29, 2378 .device = 0x1104, 2379 .subvendor = PCI_ANY_ID, 2380 .subdevice = PCI_ANY_ID, 2381 .setup = pci_fintek_setup, 2382 .init = pci_fintek_init, 2383 }, 2384 { 2385 .vendor = 0x1c29, 2386 .device = 0x1108, 2387 .subvendor = PCI_ANY_ID, 2388 .subdevice = PCI_ANY_ID, 2389 .setup = pci_fintek_setup, 2390 .init = pci_fintek_init, 2391 }, 2392 { 2393 .vendor = 0x1c29, 2394 .device = 0x1112, 2395 .subvendor = PCI_ANY_ID, 2396 .subdevice = PCI_ANY_ID, 2397 .setup = pci_fintek_setup, 2398 .init = pci_fintek_init, 2399 }, 2400 2401 /* 2402 * Default "match everything" terminator entry 2403 */ 2404 { 2405 .vendor = PCI_ANY_ID, 2406 .device = PCI_ANY_ID, 2407 .subvendor = PCI_ANY_ID, 2408 .subdevice = PCI_ANY_ID, 2409 .setup = pci_default_setup, 2410 } 2411 }; 2412 2413 static inline int quirk_id_matches(u32 quirk_id, u32 dev_id) 2414 { 2415 return quirk_id == PCI_ANY_ID || quirk_id == dev_id; 2416 } 2417 2418 static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) 2419 { 2420 struct pci_serial_quirk *quirk; 2421 2422 for (quirk = pci_serial_quirks; ; quirk++) 2423 if (quirk_id_matches(quirk->vendor, dev->vendor) && 2424 quirk_id_matches(quirk->device, dev->device) && 2425 quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) && 2426 quirk_id_matches(quirk->subdevice, dev->subsystem_device)) 2427 break; 2428 return quirk; 2429 } 2430 2431 static inline int get_pci_irq(struct pci_dev *dev, 2432 const struct pciserial_board *board) 2433 { 2434 if (board->flags & FL_NOIRQ) 2435 return 0; 2436 else 2437 return dev->irq; 2438 } 2439 2440 /* 2441 * This is the configuration table for all of the PCI serial boards 2442 * which we support. It is directly indexed by the pci_board_num_t enum 2443 * value, which is encoded in the pci_device_id PCI probe table's 2444 * driver_data member. 2445 * 2446 * The makeup of these names are: 2447 * pbn_bn{_bt}_n_baud{_offsetinhex} 2448 * 2449 * bn = PCI BAR number 2450 * bt = Index using PCI BARs 2451 * n = number of serial ports 2452 * baud = baud rate 2453 * offsetinhex = offset for each sequential port (in hex) 2454 * 2455 * This table is sorted by (in order): bn, bt, baud, offsetindex, n. 2456 * 2457 * Please note: in theory if n = 1, _bt infix should make no difference. 2458 * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200 2459 */ 2460 enum pci_board_num_t { 2461 pbn_default = 0, 2462 2463 pbn_b0_1_115200, 2464 pbn_b0_2_115200, 2465 pbn_b0_4_115200, 2466 pbn_b0_5_115200, 2467 pbn_b0_8_115200, 2468 2469 pbn_b0_1_921600, 2470 pbn_b0_2_921600, 2471 pbn_b0_4_921600, 2472 2473 pbn_b0_2_1130000, 2474 2475 pbn_b0_4_1152000, 2476 2477 pbn_b0_4_1250000, 2478 2479 pbn_b0_2_1843200, 2480 pbn_b0_4_1843200, 2481 2482 pbn_b0_1_4000000, 2483 2484 pbn_b0_bt_1_115200, 2485 pbn_b0_bt_2_115200, 2486 pbn_b0_bt_4_115200, 2487 pbn_b0_bt_8_115200, 2488 2489 pbn_b0_bt_1_460800, 2490 pbn_b0_bt_2_460800, 2491 pbn_b0_bt_4_460800, 2492 2493 pbn_b0_bt_1_921600, 2494 pbn_b0_bt_2_921600, 2495 pbn_b0_bt_4_921600, 2496 pbn_b0_bt_8_921600, 2497 2498 pbn_b1_1_115200, 2499 pbn_b1_2_115200, 2500 pbn_b1_4_115200, 2501 pbn_b1_8_115200, 2502 pbn_b1_16_115200, 2503 2504 pbn_b1_1_921600, 2505 pbn_b1_2_921600, 2506 pbn_b1_4_921600, 2507 pbn_b1_8_921600, 2508 2509 pbn_b1_2_1250000, 2510 2511 pbn_b1_bt_1_115200, 2512 pbn_b1_bt_2_115200, 2513 pbn_b1_bt_4_115200, 2514 2515 pbn_b1_bt_2_921600, 2516 2517 pbn_b1_1_1382400, 2518 pbn_b1_2_1382400, 2519 pbn_b1_4_1382400, 2520 pbn_b1_8_1382400, 2521 2522 pbn_b2_1_115200, 2523 pbn_b2_2_115200, 2524 pbn_b2_4_115200, 2525 pbn_b2_8_115200, 2526 2527 pbn_b2_1_460800, 2528 pbn_b2_4_460800, 2529 pbn_b2_8_460800, 2530 pbn_b2_16_460800, 2531 2532 pbn_b2_1_921600, 2533 pbn_b2_4_921600, 2534 pbn_b2_8_921600, 2535 2536 pbn_b2_8_1152000, 2537 2538 pbn_b2_bt_1_115200, 2539 pbn_b2_bt_2_115200, 2540 pbn_b2_bt_4_115200, 2541 2542 pbn_b2_bt_2_921600, 2543 pbn_b2_bt_4_921600, 2544 2545 pbn_b3_2_115200, 2546 pbn_b3_4_115200, 2547 pbn_b3_8_115200, 2548 2549 pbn_b4_bt_2_921600, 2550 pbn_b4_bt_4_921600, 2551 pbn_b4_bt_8_921600, 2552 2553 /* 2554 * Board-specific versions. 2555 */ 2556 pbn_panacom, 2557 pbn_panacom2, 2558 pbn_panacom4, 2559 pbn_plx_romulus, 2560 pbn_endrun_2_4000000, 2561 pbn_oxsemi, 2562 pbn_oxsemi_1_4000000, 2563 pbn_oxsemi_2_4000000, 2564 pbn_oxsemi_4_4000000, 2565 pbn_oxsemi_8_4000000, 2566 pbn_intel_i960, 2567 pbn_sgi_ioc3, 2568 pbn_computone_4, 2569 pbn_computone_6, 2570 pbn_computone_8, 2571 pbn_sbsxrsio, 2572 pbn_pasemi_1682M, 2573 pbn_ni8430_2, 2574 pbn_ni8430_4, 2575 pbn_ni8430_8, 2576 pbn_ni8430_16, 2577 pbn_ADDIDATA_PCIe_1_3906250, 2578 pbn_ADDIDATA_PCIe_2_3906250, 2579 pbn_ADDIDATA_PCIe_4_3906250, 2580 pbn_ADDIDATA_PCIe_8_3906250, 2581 pbn_ce4100_1_115200, 2582 pbn_omegapci, 2583 pbn_NETMOS9900_2s_115200, 2584 pbn_brcm_trumanage, 2585 pbn_fintek_4, 2586 pbn_fintek_8, 2587 pbn_fintek_12, 2588 pbn_wch382_2, 2589 pbn_wch384_4, 2590 pbn_pericom_PI7C9X7951, 2591 pbn_pericom_PI7C9X7952, 2592 pbn_pericom_PI7C9X7954, 2593 pbn_pericom_PI7C9X7958, 2594 }; 2595 2596 /* 2597 * uart_offset - the space between channels 2598 * reg_shift - describes how the UART registers are mapped 2599 * to PCI memory by the card. 2600 * For example IER register on SBS, Inc. PMC-OctPro is located at 2601 * offset 0x10 from the UART base, while UART_IER is defined as 1 2602 * in include/linux/serial_reg.h, 2603 * see first lines of serial_in() and serial_out() in 8250.c 2604 */ 2605 2606 static struct pciserial_board pci_boards[] = { 2607 [pbn_default] = { 2608 .flags = FL_BASE0, 2609 .num_ports = 1, 2610 .base_baud = 115200, 2611 .uart_offset = 8, 2612 }, 2613 [pbn_b0_1_115200] = { 2614 .flags = FL_BASE0, 2615 .num_ports = 1, 2616 .base_baud = 115200, 2617 .uart_offset = 8, 2618 }, 2619 [pbn_b0_2_115200] = { 2620 .flags = FL_BASE0, 2621 .num_ports = 2, 2622 .base_baud = 115200, 2623 .uart_offset = 8, 2624 }, 2625 [pbn_b0_4_115200] = { 2626 .flags = FL_BASE0, 2627 .num_ports = 4, 2628 .base_baud = 115200, 2629 .uart_offset = 8, 2630 }, 2631 [pbn_b0_5_115200] = { 2632 .flags = FL_BASE0, 2633 .num_ports = 5, 2634 .base_baud = 115200, 2635 .uart_offset = 8, 2636 }, 2637 [pbn_b0_8_115200] = { 2638 .flags = FL_BASE0, 2639 .num_ports = 8, 2640 .base_baud = 115200, 2641 .uart_offset = 8, 2642 }, 2643 [pbn_b0_1_921600] = { 2644 .flags = FL_BASE0, 2645 .num_ports = 1, 2646 .base_baud = 921600, 2647 .uart_offset = 8, 2648 }, 2649 [pbn_b0_2_921600] = { 2650 .flags = FL_BASE0, 2651 .num_ports = 2, 2652 .base_baud = 921600, 2653 .uart_offset = 8, 2654 }, 2655 [pbn_b0_4_921600] = { 2656 .flags = FL_BASE0, 2657 .num_ports = 4, 2658 .base_baud = 921600, 2659 .uart_offset = 8, 2660 }, 2661 2662 [pbn_b0_2_1130000] = { 2663 .flags = FL_BASE0, 2664 .num_ports = 2, 2665 .base_baud = 1130000, 2666 .uart_offset = 8, 2667 }, 2668 2669 [pbn_b0_4_1152000] = { 2670 .flags = FL_BASE0, 2671 .num_ports = 4, 2672 .base_baud = 1152000, 2673 .uart_offset = 8, 2674 }, 2675 2676 [pbn_b0_4_1250000] = { 2677 .flags = FL_BASE0, 2678 .num_ports = 4, 2679 .base_baud = 1250000, 2680 .uart_offset = 8, 2681 }, 2682 2683 [pbn_b0_2_1843200] = { 2684 .flags = FL_BASE0, 2685 .num_ports = 2, 2686 .base_baud = 1843200, 2687 .uart_offset = 8, 2688 }, 2689 [pbn_b0_4_1843200] = { 2690 .flags = FL_BASE0, 2691 .num_ports = 4, 2692 .base_baud = 1843200, 2693 .uart_offset = 8, 2694 }, 2695 2696 [pbn_b0_1_4000000] = { 2697 .flags = FL_BASE0, 2698 .num_ports = 1, 2699 .base_baud = 4000000, 2700 .uart_offset = 8, 2701 }, 2702 2703 [pbn_b0_bt_1_115200] = { 2704 .flags = FL_BASE0|FL_BASE_BARS, 2705 .num_ports = 1, 2706 .base_baud = 115200, 2707 .uart_offset = 8, 2708 }, 2709 [pbn_b0_bt_2_115200] = { 2710 .flags = FL_BASE0|FL_BASE_BARS, 2711 .num_ports = 2, 2712 .base_baud = 115200, 2713 .uart_offset = 8, 2714 }, 2715 [pbn_b0_bt_4_115200] = { 2716 .flags = FL_BASE0|FL_BASE_BARS, 2717 .num_ports = 4, 2718 .base_baud = 115200, 2719 .uart_offset = 8, 2720 }, 2721 [pbn_b0_bt_8_115200] = { 2722 .flags = FL_BASE0|FL_BASE_BARS, 2723 .num_ports = 8, 2724 .base_baud = 115200, 2725 .uart_offset = 8, 2726 }, 2727 2728 [pbn_b0_bt_1_460800] = { 2729 .flags = FL_BASE0|FL_BASE_BARS, 2730 .num_ports = 1, 2731 .base_baud = 460800, 2732 .uart_offset = 8, 2733 }, 2734 [pbn_b0_bt_2_460800] = { 2735 .flags = FL_BASE0|FL_BASE_BARS, 2736 .num_ports = 2, 2737 .base_baud = 460800, 2738 .uart_offset = 8, 2739 }, 2740 [pbn_b0_bt_4_460800] = { 2741 .flags = FL_BASE0|FL_BASE_BARS, 2742 .num_ports = 4, 2743 .base_baud = 460800, 2744 .uart_offset = 8, 2745 }, 2746 2747 [pbn_b0_bt_1_921600] = { 2748 .flags = FL_BASE0|FL_BASE_BARS, 2749 .num_ports = 1, 2750 .base_baud = 921600, 2751 .uart_offset = 8, 2752 }, 2753 [pbn_b0_bt_2_921600] = { 2754 .flags = FL_BASE0|FL_BASE_BARS, 2755 .num_ports = 2, 2756 .base_baud = 921600, 2757 .uart_offset = 8, 2758 }, 2759 [pbn_b0_bt_4_921600] = { 2760 .flags = FL_BASE0|FL_BASE_BARS, 2761 .num_ports = 4, 2762 .base_baud = 921600, 2763 .uart_offset = 8, 2764 }, 2765 [pbn_b0_bt_8_921600] = { 2766 .flags = FL_BASE0|FL_BASE_BARS, 2767 .num_ports = 8, 2768 .base_baud = 921600, 2769 .uart_offset = 8, 2770 }, 2771 2772 [pbn_b1_1_115200] = { 2773 .flags = FL_BASE1, 2774 .num_ports = 1, 2775 .base_baud = 115200, 2776 .uart_offset = 8, 2777 }, 2778 [pbn_b1_2_115200] = { 2779 .flags = FL_BASE1, 2780 .num_ports = 2, 2781 .base_baud = 115200, 2782 .uart_offset = 8, 2783 }, 2784 [pbn_b1_4_115200] = { 2785 .flags = FL_BASE1, 2786 .num_ports = 4, 2787 .base_baud = 115200, 2788 .uart_offset = 8, 2789 }, 2790 [pbn_b1_8_115200] = { 2791 .flags = FL_BASE1, 2792 .num_ports = 8, 2793 .base_baud = 115200, 2794 .uart_offset = 8, 2795 }, 2796 [pbn_b1_16_115200] = { 2797 .flags = FL_BASE1, 2798 .num_ports = 16, 2799 .base_baud = 115200, 2800 .uart_offset = 8, 2801 }, 2802 2803 [pbn_b1_1_921600] = { 2804 .flags = FL_BASE1, 2805 .num_ports = 1, 2806 .base_baud = 921600, 2807 .uart_offset = 8, 2808 }, 2809 [pbn_b1_2_921600] = { 2810 .flags = FL_BASE1, 2811 .num_ports = 2, 2812 .base_baud = 921600, 2813 .uart_offset = 8, 2814 }, 2815 [pbn_b1_4_921600] = { 2816 .flags = FL_BASE1, 2817 .num_ports = 4, 2818 .base_baud = 921600, 2819 .uart_offset = 8, 2820 }, 2821 [pbn_b1_8_921600] = { 2822 .flags = FL_BASE1, 2823 .num_ports = 8, 2824 .base_baud = 921600, 2825 .uart_offset = 8, 2826 }, 2827 [pbn_b1_2_1250000] = { 2828 .flags = FL_BASE1, 2829 .num_ports = 2, 2830 .base_baud = 1250000, 2831 .uart_offset = 8, 2832 }, 2833 2834 [pbn_b1_bt_1_115200] = { 2835 .flags = FL_BASE1|FL_BASE_BARS, 2836 .num_ports = 1, 2837 .base_baud = 115200, 2838 .uart_offset = 8, 2839 }, 2840 [pbn_b1_bt_2_115200] = { 2841 .flags = FL_BASE1|FL_BASE_BARS, 2842 .num_ports = 2, 2843 .base_baud = 115200, 2844 .uart_offset = 8, 2845 }, 2846 [pbn_b1_bt_4_115200] = { 2847 .flags = FL_BASE1|FL_BASE_BARS, 2848 .num_ports = 4, 2849 .base_baud = 115200, 2850 .uart_offset = 8, 2851 }, 2852 2853 [pbn_b1_bt_2_921600] = { 2854 .flags = FL_BASE1|FL_BASE_BARS, 2855 .num_ports = 2, 2856 .base_baud = 921600, 2857 .uart_offset = 8, 2858 }, 2859 2860 [pbn_b1_1_1382400] = { 2861 .flags = FL_BASE1, 2862 .num_ports = 1, 2863 .base_baud = 1382400, 2864 .uart_offset = 8, 2865 }, 2866 [pbn_b1_2_1382400] = { 2867 .flags = FL_BASE1, 2868 .num_ports = 2, 2869 .base_baud = 1382400, 2870 .uart_offset = 8, 2871 }, 2872 [pbn_b1_4_1382400] = { 2873 .flags = FL_BASE1, 2874 .num_ports = 4, 2875 .base_baud = 1382400, 2876 .uart_offset = 8, 2877 }, 2878 [pbn_b1_8_1382400] = { 2879 .flags = FL_BASE1, 2880 .num_ports = 8, 2881 .base_baud = 1382400, 2882 .uart_offset = 8, 2883 }, 2884 2885 [pbn_b2_1_115200] = { 2886 .flags = FL_BASE2, 2887 .num_ports = 1, 2888 .base_baud = 115200, 2889 .uart_offset = 8, 2890 }, 2891 [pbn_b2_2_115200] = { 2892 .flags = FL_BASE2, 2893 .num_ports = 2, 2894 .base_baud = 115200, 2895 .uart_offset = 8, 2896 }, 2897 [pbn_b2_4_115200] = { 2898 .flags = FL_BASE2, 2899 .num_ports = 4, 2900 .base_baud = 115200, 2901 .uart_offset = 8, 2902 }, 2903 [pbn_b2_8_115200] = { 2904 .flags = FL_BASE2, 2905 .num_ports = 8, 2906 .base_baud = 115200, 2907 .uart_offset = 8, 2908 }, 2909 2910 [pbn_b2_1_460800] = { 2911 .flags = FL_BASE2, 2912 .num_ports = 1, 2913 .base_baud = 460800, 2914 .uart_offset = 8, 2915 }, 2916 [pbn_b2_4_460800] = { 2917 .flags = FL_BASE2, 2918 .num_ports = 4, 2919 .base_baud = 460800, 2920 .uart_offset = 8, 2921 }, 2922 [pbn_b2_8_460800] = { 2923 .flags = FL_BASE2, 2924 .num_ports = 8, 2925 .base_baud = 460800, 2926 .uart_offset = 8, 2927 }, 2928 [pbn_b2_16_460800] = { 2929 .flags = FL_BASE2, 2930 .num_ports = 16, 2931 .base_baud = 460800, 2932 .uart_offset = 8, 2933 }, 2934 2935 [pbn_b2_1_921600] = { 2936 .flags = FL_BASE2, 2937 .num_ports = 1, 2938 .base_baud = 921600, 2939 .uart_offset = 8, 2940 }, 2941 [pbn_b2_4_921600] = { 2942 .flags = FL_BASE2, 2943 .num_ports = 4, 2944 .base_baud = 921600, 2945 .uart_offset = 8, 2946 }, 2947 [pbn_b2_8_921600] = { 2948 .flags = FL_BASE2, 2949 .num_ports = 8, 2950 .base_baud = 921600, 2951 .uart_offset = 8, 2952 }, 2953 2954 [pbn_b2_8_1152000] = { 2955 .flags = FL_BASE2, 2956 .num_ports = 8, 2957 .base_baud = 1152000, 2958 .uart_offset = 8, 2959 }, 2960 2961 [pbn_b2_bt_1_115200] = { 2962 .flags = FL_BASE2|FL_BASE_BARS, 2963 .num_ports = 1, 2964 .base_baud = 115200, 2965 .uart_offset = 8, 2966 }, 2967 [pbn_b2_bt_2_115200] = { 2968 .flags = FL_BASE2|FL_BASE_BARS, 2969 .num_ports = 2, 2970 .base_baud = 115200, 2971 .uart_offset = 8, 2972 }, 2973 [pbn_b2_bt_4_115200] = { 2974 .flags = FL_BASE2|FL_BASE_BARS, 2975 .num_ports = 4, 2976 .base_baud = 115200, 2977 .uart_offset = 8, 2978 }, 2979 2980 [pbn_b2_bt_2_921600] = { 2981 .flags = FL_BASE2|FL_BASE_BARS, 2982 .num_ports = 2, 2983 .base_baud = 921600, 2984 .uart_offset = 8, 2985 }, 2986 [pbn_b2_bt_4_921600] = { 2987 .flags = FL_BASE2|FL_BASE_BARS, 2988 .num_ports = 4, 2989 .base_baud = 921600, 2990 .uart_offset = 8, 2991 }, 2992 2993 [pbn_b3_2_115200] = { 2994 .flags = FL_BASE3, 2995 .num_ports = 2, 2996 .base_baud = 115200, 2997 .uart_offset = 8, 2998 }, 2999 [pbn_b3_4_115200] = { 3000 .flags = FL_BASE3, 3001 .num_ports = 4, 3002 .base_baud = 115200, 3003 .uart_offset = 8, 3004 }, 3005 [pbn_b3_8_115200] = { 3006 .flags = FL_BASE3, 3007 .num_ports = 8, 3008 .base_baud = 115200, 3009 .uart_offset = 8, 3010 }, 3011 3012 [pbn_b4_bt_2_921600] = { 3013 .flags = FL_BASE4, 3014 .num_ports = 2, 3015 .base_baud = 921600, 3016 .uart_offset = 8, 3017 }, 3018 [pbn_b4_bt_4_921600] = { 3019 .flags = FL_BASE4, 3020 .num_ports = 4, 3021 .base_baud = 921600, 3022 .uart_offset = 8, 3023 }, 3024 [pbn_b4_bt_8_921600] = { 3025 .flags = FL_BASE4, 3026 .num_ports = 8, 3027 .base_baud = 921600, 3028 .uart_offset = 8, 3029 }, 3030 3031 /* 3032 * Entries following this are board-specific. 3033 */ 3034 3035 /* 3036 * Panacom - IOMEM 3037 */ 3038 [pbn_panacom] = { 3039 .flags = FL_BASE2, 3040 .num_ports = 2, 3041 .base_baud = 921600, 3042 .uart_offset = 0x400, 3043 .reg_shift = 7, 3044 }, 3045 [pbn_panacom2] = { 3046 .flags = FL_BASE2|FL_BASE_BARS, 3047 .num_ports = 2, 3048 .base_baud = 921600, 3049 .uart_offset = 0x400, 3050 .reg_shift = 7, 3051 }, 3052 [pbn_panacom4] = { 3053 .flags = FL_BASE2|FL_BASE_BARS, 3054 .num_ports = 4, 3055 .base_baud = 921600, 3056 .uart_offset = 0x400, 3057 .reg_shift = 7, 3058 }, 3059 3060 /* I think this entry is broken - the first_offset looks wrong --rmk */ 3061 [pbn_plx_romulus] = { 3062 .flags = FL_BASE2, 3063 .num_ports = 4, 3064 .base_baud = 921600, 3065 .uart_offset = 8 << 2, 3066 .reg_shift = 2, 3067 .first_offset = 0x03, 3068 }, 3069 3070 /* 3071 * EndRun Technologies 3072 * Uses the size of PCI Base region 0 to 3073 * signal now many ports are available 3074 * 2 port 952 Uart support 3075 */ 3076 [pbn_endrun_2_4000000] = { 3077 .flags = FL_BASE0, 3078 .num_ports = 2, 3079 .base_baud = 4000000, 3080 .uart_offset = 0x200, 3081 .first_offset = 0x1000, 3082 }, 3083 3084 /* 3085 * This board uses the size of PCI Base region 0 to 3086 * signal now many ports are available 3087 */ 3088 [pbn_oxsemi] = { 3089 .flags = FL_BASE0|FL_REGION_SZ_CAP, 3090 .num_ports = 32, 3091 .base_baud = 115200, 3092 .uart_offset = 8, 3093 }, 3094 [pbn_oxsemi_1_4000000] = { 3095 .flags = FL_BASE0, 3096 .num_ports = 1, 3097 .base_baud = 4000000, 3098 .uart_offset = 0x200, 3099 .first_offset = 0x1000, 3100 }, 3101 [pbn_oxsemi_2_4000000] = { 3102 .flags = FL_BASE0, 3103 .num_ports = 2, 3104 .base_baud = 4000000, 3105 .uart_offset = 0x200, 3106 .first_offset = 0x1000, 3107 }, 3108 [pbn_oxsemi_4_4000000] = { 3109 .flags = FL_BASE0, 3110 .num_ports = 4, 3111 .base_baud = 4000000, 3112 .uart_offset = 0x200, 3113 .first_offset = 0x1000, 3114 }, 3115 [pbn_oxsemi_8_4000000] = { 3116 .flags = FL_BASE0, 3117 .num_ports = 8, 3118 .base_baud = 4000000, 3119 .uart_offset = 0x200, 3120 .first_offset = 0x1000, 3121 }, 3122 3123 3124 /* 3125 * EKF addition for i960 Boards form EKF with serial port. 3126 * Max 256 ports. 3127 */ 3128 [pbn_intel_i960] = { 3129 .flags = FL_BASE0, 3130 .num_ports = 32, 3131 .base_baud = 921600, 3132 .uart_offset = 8 << 2, 3133 .reg_shift = 2, 3134 .first_offset = 0x10000, 3135 }, 3136 [pbn_sgi_ioc3] = { 3137 .flags = FL_BASE0|FL_NOIRQ, 3138 .num_ports = 1, 3139 .base_baud = 458333, 3140 .uart_offset = 8, 3141 .reg_shift = 0, 3142 .first_offset = 0x20178, 3143 }, 3144 3145 /* 3146 * Computone - uses IOMEM. 3147 */ 3148 [pbn_computone_4] = { 3149 .flags = FL_BASE0, 3150 .num_ports = 4, 3151 .base_baud = 921600, 3152 .uart_offset = 0x40, 3153 .reg_shift = 2, 3154 .first_offset = 0x200, 3155 }, 3156 [pbn_computone_6] = { 3157 .flags = FL_BASE0, 3158 .num_ports = 6, 3159 .base_baud = 921600, 3160 .uart_offset = 0x40, 3161 .reg_shift = 2, 3162 .first_offset = 0x200, 3163 }, 3164 [pbn_computone_8] = { 3165 .flags = FL_BASE0, 3166 .num_ports = 8, 3167 .base_baud = 921600, 3168 .uart_offset = 0x40, 3169 .reg_shift = 2, 3170 .first_offset = 0x200, 3171 }, 3172 [pbn_sbsxrsio] = { 3173 .flags = FL_BASE0, 3174 .num_ports = 8, 3175 .base_baud = 460800, 3176 .uart_offset = 256, 3177 .reg_shift = 4, 3178 }, 3179 /* 3180 * PA Semi PWRficient PA6T-1682M on-chip UART 3181 */ 3182 [pbn_pasemi_1682M] = { 3183 .flags = FL_BASE0, 3184 .num_ports = 1, 3185 .base_baud = 8333333, 3186 }, 3187 /* 3188 * National Instruments 843x 3189 */ 3190 [pbn_ni8430_16] = { 3191 .flags = FL_BASE0, 3192 .num_ports = 16, 3193 .base_baud = 3686400, 3194 .uart_offset = 0x10, 3195 .first_offset = 0x800, 3196 }, 3197 [pbn_ni8430_8] = { 3198 .flags = FL_BASE0, 3199 .num_ports = 8, 3200 .base_baud = 3686400, 3201 .uart_offset = 0x10, 3202 .first_offset = 0x800, 3203 }, 3204 [pbn_ni8430_4] = { 3205 .flags = FL_BASE0, 3206 .num_ports = 4, 3207 .base_baud = 3686400, 3208 .uart_offset = 0x10, 3209 .first_offset = 0x800, 3210 }, 3211 [pbn_ni8430_2] = { 3212 .flags = FL_BASE0, 3213 .num_ports = 2, 3214 .base_baud = 3686400, 3215 .uart_offset = 0x10, 3216 .first_offset = 0x800, 3217 }, 3218 /* 3219 * ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com> 3220 */ 3221 [pbn_ADDIDATA_PCIe_1_3906250] = { 3222 .flags = FL_BASE0, 3223 .num_ports = 1, 3224 .base_baud = 3906250, 3225 .uart_offset = 0x200, 3226 .first_offset = 0x1000, 3227 }, 3228 [pbn_ADDIDATA_PCIe_2_3906250] = { 3229 .flags = FL_BASE0, 3230 .num_ports = 2, 3231 .base_baud = 3906250, 3232 .uart_offset = 0x200, 3233 .first_offset = 0x1000, 3234 }, 3235 [pbn_ADDIDATA_PCIe_4_3906250] = { 3236 .flags = FL_BASE0, 3237 .num_ports = 4, 3238 .base_baud = 3906250, 3239 .uart_offset = 0x200, 3240 .first_offset = 0x1000, 3241 }, 3242 [pbn_ADDIDATA_PCIe_8_3906250] = { 3243 .flags = FL_BASE0, 3244 .num_ports = 8, 3245 .base_baud = 3906250, 3246 .uart_offset = 0x200, 3247 .first_offset = 0x1000, 3248 }, 3249 [pbn_ce4100_1_115200] = { 3250 .flags = FL_BASE_BARS, 3251 .num_ports = 2, 3252 .base_baud = 921600, 3253 .reg_shift = 2, 3254 }, 3255 [pbn_omegapci] = { 3256 .flags = FL_BASE0, 3257 .num_ports = 8, 3258 .base_baud = 115200, 3259 .uart_offset = 0x200, 3260 }, 3261 [pbn_NETMOS9900_2s_115200] = { 3262 .flags = FL_BASE0, 3263 .num_ports = 2, 3264 .base_baud = 115200, 3265 }, 3266 [pbn_brcm_trumanage] = { 3267 .flags = FL_BASE0, 3268 .num_ports = 1, 3269 .reg_shift = 2, 3270 .base_baud = 115200, 3271 }, 3272 [pbn_fintek_4] = { 3273 .num_ports = 4, 3274 .uart_offset = 8, 3275 .base_baud = 115200, 3276 .first_offset = 0x40, 3277 }, 3278 [pbn_fintek_8] = { 3279 .num_ports = 8, 3280 .uart_offset = 8, 3281 .base_baud = 115200, 3282 .first_offset = 0x40, 3283 }, 3284 [pbn_fintek_12] = { 3285 .num_ports = 12, 3286 .uart_offset = 8, 3287 .base_baud = 115200, 3288 .first_offset = 0x40, 3289 }, 3290 [pbn_wch382_2] = { 3291 .flags = FL_BASE0, 3292 .num_ports = 2, 3293 .base_baud = 115200, 3294 .uart_offset = 8, 3295 .first_offset = 0xC0, 3296 }, 3297 [pbn_wch384_4] = { 3298 .flags = FL_BASE0, 3299 .num_ports = 4, 3300 .base_baud = 115200, 3301 .uart_offset = 8, 3302 .first_offset = 0xC0, 3303 }, 3304 /* 3305 * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART 3306 */ 3307 [pbn_pericom_PI7C9X7951] = { 3308 .flags = FL_BASE0, 3309 .num_ports = 1, 3310 .base_baud = 921600, 3311 .uart_offset = 0x8, 3312 }, 3313 [pbn_pericom_PI7C9X7952] = { 3314 .flags = FL_BASE0, 3315 .num_ports = 2, 3316 .base_baud = 921600, 3317 .uart_offset = 0x8, 3318 }, 3319 [pbn_pericom_PI7C9X7954] = { 3320 .flags = FL_BASE0, 3321 .num_ports = 4, 3322 .base_baud = 921600, 3323 .uart_offset = 0x8, 3324 }, 3325 [pbn_pericom_PI7C9X7958] = { 3326 .flags = FL_BASE0, 3327 .num_ports = 8, 3328 .base_baud = 921600, 3329 .uart_offset = 0x8, 3330 }, 3331 }; 3332 3333 static const struct pci_device_id blacklist[] = { 3334 /* softmodems */ 3335 { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */ 3336 { PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */ 3337 { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */ 3338 3339 /* multi-io cards handled by parport_serial */ 3340 { PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */ 3341 { PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */ 3342 { PCI_DEVICE(0x4348, 0x7173), }, /* WCH CH355 4S */ 3343 { PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */ 3344 { PCI_DEVICE(0x1c00, 0x3470), }, /* WCH CH384 4S */ 3345 3346 /* Moxa Smartio MUE boards handled by 8250_moxa */ 3347 { PCI_VDEVICE(MOXA, 0x1024), }, 3348 { PCI_VDEVICE(MOXA, 0x1025), }, 3349 { PCI_VDEVICE(MOXA, 0x1045), }, 3350 { PCI_VDEVICE(MOXA, 0x1144), }, 3351 { PCI_VDEVICE(MOXA, 0x1160), }, 3352 { PCI_VDEVICE(MOXA, 0x1161), }, 3353 { PCI_VDEVICE(MOXA, 0x1182), }, 3354 { PCI_VDEVICE(MOXA, 0x1183), }, 3355 { PCI_VDEVICE(MOXA, 0x1322), }, 3356 { PCI_VDEVICE(MOXA, 0x1342), }, 3357 { PCI_VDEVICE(MOXA, 0x1381), }, 3358 { PCI_VDEVICE(MOXA, 0x1683), }, 3359 3360 /* Intel platforms with MID UART */ 3361 { PCI_VDEVICE(INTEL, 0x081b), }, 3362 { PCI_VDEVICE(INTEL, 0x081c), }, 3363 { PCI_VDEVICE(INTEL, 0x081d), }, 3364 { PCI_VDEVICE(INTEL, 0x1191), }, 3365 { PCI_VDEVICE(INTEL, 0x18d8), }, 3366 { PCI_VDEVICE(INTEL, 0x19d8), }, 3367 3368 /* Intel platforms with DesignWare UART */ 3369 { PCI_VDEVICE(INTEL, 0x0936), }, 3370 { PCI_VDEVICE(INTEL, 0x0f0a), }, 3371 { PCI_VDEVICE(INTEL, 0x0f0c), }, 3372 { PCI_VDEVICE(INTEL, 0x228a), }, 3373 { PCI_VDEVICE(INTEL, 0x228c), }, 3374 { PCI_VDEVICE(INTEL, 0x9ce3), }, 3375 { PCI_VDEVICE(INTEL, 0x9ce4), }, 3376 3377 /* Exar devices */ 3378 { PCI_VDEVICE(EXAR, PCI_ANY_ID), }, 3379 { PCI_VDEVICE(COMMTECH, PCI_ANY_ID), }, 3380 }; 3381 3382 static int serial_pci_is_class_communication(struct pci_dev *dev) 3383 { 3384 /* 3385 * If it is not a communications device or the programming 3386 * interface is greater than 6, give up. 3387 */ 3388 if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && 3389 ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MULTISERIAL) && 3390 ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || 3391 (dev->class & 0xff) > 6) 3392 return -ENODEV; 3393 3394 return 0; 3395 } 3396 3397 static int serial_pci_is_blacklisted(struct pci_dev *dev) 3398 { 3399 const struct pci_device_id *bldev; 3400 3401 /* 3402 * Do not access blacklisted devices that are known not to 3403 * feature serial ports or are handled by other modules. 3404 */ 3405 for (bldev = blacklist; 3406 bldev < blacklist + ARRAY_SIZE(blacklist); 3407 bldev++) { 3408 if (dev->vendor == bldev->vendor && 3409 dev->device == bldev->device) 3410 return -ENODEV; 3411 } 3412 3413 return 0; 3414 } 3415 3416 /* 3417 * Given a complete unknown PCI device, try to use some heuristics to 3418 * guess what the configuration might be, based on the pitiful PCI 3419 * serial specs. Returns 0 on success, -ENODEV on failure. 3420 */ 3421 static int 3422 serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) 3423 { 3424 int num_iomem, num_port, first_port = -1, i; 3425 3426 /* 3427 * Should we try to make guesses for multiport serial devices later? 3428 */ 3429 if ((dev->class >> 8) == PCI_CLASS_COMMUNICATION_MULTISERIAL) 3430 return -ENODEV; 3431 3432 num_iomem = num_port = 0; 3433 for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { 3434 if (pci_resource_flags(dev, i) & IORESOURCE_IO) { 3435 num_port++; 3436 if (first_port == -1) 3437 first_port = i; 3438 } 3439 if (pci_resource_flags(dev, i) & IORESOURCE_MEM) 3440 num_iomem++; 3441 } 3442 3443 /* 3444 * If there is 1 or 0 iomem regions, and exactly one port, 3445 * use it. We guess the number of ports based on the IO 3446 * region size. 3447 */ 3448 if (num_iomem <= 1 && num_port == 1) { 3449 board->flags = first_port; 3450 board->num_ports = pci_resource_len(dev, first_port) / 8; 3451 return 0; 3452 } 3453 3454 /* 3455 * Now guess if we've got a board which indexes by BARs. 3456 * Each IO BAR should be 8 bytes, and they should follow 3457 * consecutively. 3458 */ 3459 first_port = -1; 3460 num_port = 0; 3461 for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { 3462 if (pci_resource_flags(dev, i) & IORESOURCE_IO && 3463 pci_resource_len(dev, i) == 8 && 3464 (first_port == -1 || (first_port + num_port) == i)) { 3465 num_port++; 3466 if (first_port == -1) 3467 first_port = i; 3468 } 3469 } 3470 3471 if (num_port > 1) { 3472 board->flags = first_port | FL_BASE_BARS; 3473 board->num_ports = num_port; 3474 return 0; 3475 } 3476 3477 return -ENODEV; 3478 } 3479 3480 static inline int 3481 serial_pci_matches(const struct pciserial_board *board, 3482 const struct pciserial_board *guessed) 3483 { 3484 return 3485 board->num_ports == guessed->num_ports && 3486 board->base_baud == guessed->base_baud && 3487 board->uart_offset == guessed->uart_offset && 3488 board->reg_shift == guessed->reg_shift && 3489 board->first_offset == guessed->first_offset; 3490 } 3491 3492 struct serial_private * 3493 pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) 3494 { 3495 struct uart_8250_port uart; 3496 struct serial_private *priv; 3497 struct pci_serial_quirk *quirk; 3498 int rc, nr_ports, i; 3499 3500 nr_ports = board->num_ports; 3501 3502 /* 3503 * Find an init and setup quirks. 3504 */ 3505 quirk = find_quirk(dev); 3506 3507 /* 3508 * Run the new-style initialization function. 3509 * The initialization function returns: 3510 * <0 - error 3511 * 0 - use board->num_ports 3512 * >0 - number of ports 3513 */ 3514 if (quirk->init) { 3515 rc = quirk->init(dev); 3516 if (rc < 0) { 3517 priv = ERR_PTR(rc); 3518 goto err_out; 3519 } 3520 if (rc) 3521 nr_ports = rc; 3522 } 3523 3524 priv = kzalloc(sizeof(struct serial_private) + 3525 sizeof(unsigned int) * nr_ports, 3526 GFP_KERNEL); 3527 if (!priv) { 3528 priv = ERR_PTR(-ENOMEM); 3529 goto err_deinit; 3530 } 3531 3532 priv->dev = dev; 3533 priv->quirk = quirk; 3534 3535 memset(&uart, 0, sizeof(uart)); 3536 uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; 3537 uart.port.uartclk = board->base_baud * 16; 3538 uart.port.irq = get_pci_irq(dev, board); 3539 uart.port.dev = &dev->dev; 3540 3541 for (i = 0; i < nr_ports; i++) { 3542 if (quirk->setup(priv, board, &uart, i)) 3543 break; 3544 3545 dev_dbg(&dev->dev, "Setup PCI port: port %lx, irq %d, type %d\n", 3546 uart.port.iobase, uart.port.irq, uart.port.iotype); 3547 3548 priv->line[i] = serial8250_register_8250_port(&uart); 3549 if (priv->line[i] < 0) { 3550 dev_err(&dev->dev, 3551 "Couldn't register serial port %lx, irq %d, type %d, error %d\n", 3552 uart.port.iobase, uart.port.irq, 3553 uart.port.iotype, priv->line[i]); 3554 break; 3555 } 3556 } 3557 priv->nr = i; 3558 priv->board = board; 3559 return priv; 3560 3561 err_deinit: 3562 if (quirk->exit) 3563 quirk->exit(dev); 3564 err_out: 3565 return priv; 3566 } 3567 EXPORT_SYMBOL_GPL(pciserial_init_ports); 3568 3569 static void pciserial_detach_ports(struct serial_private *priv) 3570 { 3571 struct pci_serial_quirk *quirk; 3572 int i; 3573 3574 for (i = 0; i < priv->nr; i++) 3575 serial8250_unregister_port(priv->line[i]); 3576 3577 /* 3578 * Find the exit quirks. 3579 */ 3580 quirk = find_quirk(priv->dev); 3581 if (quirk->exit) 3582 quirk->exit(priv->dev); 3583 } 3584 3585 void pciserial_remove_ports(struct serial_private *priv) 3586 { 3587 pciserial_detach_ports(priv); 3588 kfree(priv); 3589 } 3590 EXPORT_SYMBOL_GPL(pciserial_remove_ports); 3591 3592 void pciserial_suspend_ports(struct serial_private *priv) 3593 { 3594 int i; 3595 3596 for (i = 0; i < priv->nr; i++) 3597 if (priv->line[i] >= 0) 3598 serial8250_suspend_port(priv->line[i]); 3599 3600 /* 3601 * Ensure that every init quirk is properly torn down 3602 */ 3603 if (priv->quirk->exit) 3604 priv->quirk->exit(priv->dev); 3605 } 3606 EXPORT_SYMBOL_GPL(pciserial_suspend_ports); 3607 3608 void pciserial_resume_ports(struct serial_private *priv) 3609 { 3610 int i; 3611 3612 /* 3613 * Ensure that the board is correctly configured. 3614 */ 3615 if (priv->quirk->init) 3616 priv->quirk->init(priv->dev); 3617 3618 for (i = 0; i < priv->nr; i++) 3619 if (priv->line[i] >= 0) 3620 serial8250_resume_port(priv->line[i]); 3621 } 3622 EXPORT_SYMBOL_GPL(pciserial_resume_ports); 3623 3624 /* 3625 * Probe one serial board. Unfortunately, there is no rhyme nor reason 3626 * to the arrangement of serial ports on a PCI card. 3627 */ 3628 static int 3629 pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) 3630 { 3631 struct pci_serial_quirk *quirk; 3632 struct serial_private *priv; 3633 const struct pciserial_board *board; 3634 struct pciserial_board tmp; 3635 int rc; 3636 3637 quirk = find_quirk(dev); 3638 if (quirk->probe) { 3639 rc = quirk->probe(dev); 3640 if (rc) 3641 return rc; 3642 } 3643 3644 if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { 3645 dev_err(&dev->dev, "invalid driver_data: %ld\n", 3646 ent->driver_data); 3647 return -EINVAL; 3648 } 3649 3650 board = &pci_boards[ent->driver_data]; 3651 3652 rc = serial_pci_is_class_communication(dev); 3653 if (rc) 3654 return rc; 3655 3656 rc = serial_pci_is_blacklisted(dev); 3657 if (rc) 3658 return rc; 3659 3660 rc = pcim_enable_device(dev); 3661 pci_save_state(dev); 3662 if (rc) 3663 return rc; 3664 3665 if (ent->driver_data == pbn_default) { 3666 /* 3667 * Use a copy of the pci_board entry for this; 3668 * avoid changing entries in the table. 3669 */ 3670 memcpy(&tmp, board, sizeof(struct pciserial_board)); 3671 board = &tmp; 3672 3673 /* 3674 * We matched one of our class entries. Try to 3675 * determine the parameters of this board. 3676 */ 3677 rc = serial_pci_guess_board(dev, &tmp); 3678 if (rc) 3679 return rc; 3680 } else { 3681 /* 3682 * We matched an explicit entry. If we are able to 3683 * detect this boards settings with our heuristic, 3684 * then we no longer need this entry. 3685 */ 3686 memcpy(&tmp, &pci_boards[pbn_default], 3687 sizeof(struct pciserial_board)); 3688 rc = serial_pci_guess_board(dev, &tmp); 3689 if (rc == 0 && serial_pci_matches(board, &tmp)) 3690 moan_device("Redundant entry in serial pci_table.", 3691 dev); 3692 } 3693 3694 priv = pciserial_init_ports(dev, board); 3695 if (IS_ERR(priv)) 3696 return PTR_ERR(priv); 3697 3698 pci_set_drvdata(dev, priv); 3699 return 0; 3700 } 3701 3702 static void pciserial_remove_one(struct pci_dev *dev) 3703 { 3704 struct serial_private *priv = pci_get_drvdata(dev); 3705 3706 pciserial_remove_ports(priv); 3707 } 3708 3709 #ifdef CONFIG_PM_SLEEP 3710 static int pciserial_suspend_one(struct device *dev) 3711 { 3712 struct pci_dev *pdev = to_pci_dev(dev); 3713 struct serial_private *priv = pci_get_drvdata(pdev); 3714 3715 if (priv) 3716 pciserial_suspend_ports(priv); 3717 3718 return 0; 3719 } 3720 3721 static int pciserial_resume_one(struct device *dev) 3722 { 3723 struct pci_dev *pdev = to_pci_dev(dev); 3724 struct serial_private *priv = pci_get_drvdata(pdev); 3725 int err; 3726 3727 if (priv) { 3728 /* 3729 * The device may have been disabled. Re-enable it. 3730 */ 3731 err = pci_enable_device(pdev); 3732 /* FIXME: We cannot simply error out here */ 3733 if (err) 3734 dev_err(dev, "Unable to re-enable ports, trying to continue.\n"); 3735 pciserial_resume_ports(priv); 3736 } 3737 return 0; 3738 } 3739 #endif 3740 3741 static SIMPLE_DEV_PM_OPS(pciserial_pm_ops, pciserial_suspend_one, 3742 pciserial_resume_one); 3743 3744 static const struct pci_device_id serial_pci_tbl[] = { 3745 /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */ 3746 { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620, 3747 PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0, 3748 pbn_b2_8_921600 }, 3749 /* Advantech also use 0x3618 and 0xf618 */ 3750 { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3618, 3751 PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0, 3752 pbn_b0_4_921600 }, 3753 { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCIf618, 3754 PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0, 3755 pbn_b0_4_921600 }, 3756 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, 3757 PCI_SUBVENDOR_ID_CONNECT_TECH, 3758 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, 3759 pbn_b1_8_1382400 }, 3760 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, 3761 PCI_SUBVENDOR_ID_CONNECT_TECH, 3762 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, 3763 pbn_b1_4_1382400 }, 3764 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, 3765 PCI_SUBVENDOR_ID_CONNECT_TECH, 3766 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, 3767 pbn_b1_2_1382400 }, 3768 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3769 PCI_SUBVENDOR_ID_CONNECT_TECH, 3770 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, 3771 pbn_b1_8_1382400 }, 3772 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3773 PCI_SUBVENDOR_ID_CONNECT_TECH, 3774 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, 3775 pbn_b1_4_1382400 }, 3776 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3777 PCI_SUBVENDOR_ID_CONNECT_TECH, 3778 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, 3779 pbn_b1_2_1382400 }, 3780 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3781 PCI_SUBVENDOR_ID_CONNECT_TECH, 3782 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0, 3783 pbn_b1_8_921600 }, 3784 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3785 PCI_SUBVENDOR_ID_CONNECT_TECH, 3786 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0, 3787 pbn_b1_8_921600 }, 3788 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3789 PCI_SUBVENDOR_ID_CONNECT_TECH, 3790 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0, 3791 pbn_b1_4_921600 }, 3792 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3793 PCI_SUBVENDOR_ID_CONNECT_TECH, 3794 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0, 3795 pbn_b1_4_921600 }, 3796 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3797 PCI_SUBVENDOR_ID_CONNECT_TECH, 3798 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0, 3799 pbn_b1_2_921600 }, 3800 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3801 PCI_SUBVENDOR_ID_CONNECT_TECH, 3802 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0, 3803 pbn_b1_8_921600 }, 3804 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3805 PCI_SUBVENDOR_ID_CONNECT_TECH, 3806 PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0, 3807 pbn_b1_8_921600 }, 3808 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3809 PCI_SUBVENDOR_ID_CONNECT_TECH, 3810 PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0, 3811 pbn_b1_4_921600 }, 3812 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3813 PCI_SUBVENDOR_ID_CONNECT_TECH, 3814 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0, 3815 pbn_b1_2_1250000 }, 3816 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, 3817 PCI_SUBVENDOR_ID_CONNECT_TECH, 3818 PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0, 3819 pbn_b0_2_1843200 }, 3820 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, 3821 PCI_SUBVENDOR_ID_CONNECT_TECH, 3822 PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0, 3823 pbn_b0_4_1843200 }, 3824 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, 3825 PCI_VENDOR_ID_AFAVLAB, 3826 PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0, 3827 pbn_b0_4_1152000 }, 3828 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, 3829 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3830 pbn_b2_bt_1_115200 }, 3831 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2, 3832 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3833 pbn_b2_bt_2_115200 }, 3834 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422, 3835 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3836 pbn_b2_bt_4_115200 }, 3837 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232, 3838 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3839 pbn_b2_bt_2_115200 }, 3840 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4, 3841 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3842 pbn_b2_bt_4_115200 }, 3843 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8, 3844 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3845 pbn_b2_8_115200 }, 3846 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803, 3847 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3848 pbn_b2_8_460800 }, 3849 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8, 3850 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3851 pbn_b2_8_115200 }, 3852 3853 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2, 3854 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3855 pbn_b2_bt_2_115200 }, 3856 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200, 3857 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3858 pbn_b2_bt_2_921600 }, 3859 /* 3860 * VScom SPCOM800, from sl@s.pl 3861 */ 3862 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, 3863 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3864 pbn_b2_8_921600 }, 3865 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077, 3866 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3867 pbn_b2_4_921600 }, 3868 /* Unknown card - subdevice 0x1584 */ 3869 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3870 PCI_VENDOR_ID_PLX, 3871 PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0, 3872 pbn_b2_4_115200 }, 3873 /* Unknown card - subdevice 0x1588 */ 3874 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3875 PCI_VENDOR_ID_PLX, 3876 PCI_SUBDEVICE_ID_UNKNOWN_0x1588, 0, 0, 3877 pbn_b2_8_115200 }, 3878 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3879 PCI_SUBVENDOR_ID_KEYSPAN, 3880 PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0, 3881 pbn_panacom }, 3882 { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM, 3883 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3884 pbn_panacom4 }, 3885 { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM, 3886 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3887 pbn_panacom2 }, 3888 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, 3889 PCI_VENDOR_ID_ESDGMBH, 3890 PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0, 3891 pbn_b2_4_115200 }, 3892 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3893 PCI_SUBVENDOR_ID_CHASE_PCIFAST, 3894 PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, 3895 pbn_b2_4_460800 }, 3896 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3897 PCI_SUBVENDOR_ID_CHASE_PCIFAST, 3898 PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, 3899 pbn_b2_8_460800 }, 3900 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3901 PCI_SUBVENDOR_ID_CHASE_PCIFAST, 3902 PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, 3903 pbn_b2_16_460800 }, 3904 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3905 PCI_SUBVENDOR_ID_CHASE_PCIFAST, 3906 PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, 3907 pbn_b2_16_460800 }, 3908 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3909 PCI_SUBVENDOR_ID_CHASE_PCIRAS, 3910 PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, 3911 pbn_b2_4_460800 }, 3912 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3913 PCI_SUBVENDOR_ID_CHASE_PCIRAS, 3914 PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, 3915 pbn_b2_8_460800 }, 3916 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3917 PCI_SUBVENDOR_ID_EXSYS, 3918 PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0, 3919 pbn_b2_4_115200 }, 3920 /* 3921 * Megawolf Romulus PCI Serial Card, from Mike Hudson 3922 * (Exoray@isys.ca) 3923 */ 3924 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS, 3925 0x10b5, 0x106a, 0, 0, 3926 pbn_plx_romulus }, 3927 /* 3928 * EndRun Technologies. PCI express device range. 3929 * EndRun PTP/1588 has 2 Native UARTs. 3930 */ 3931 { PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588, 3932 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3933 pbn_endrun_2_4000000 }, 3934 /* 3935 * Quatech cards. These actually have configurable clocks but for 3936 * now we just use the default. 3937 * 3938 * 100 series are RS232, 200 series RS422, 3939 */ 3940 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100, 3941 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3942 pbn_b1_4_115200 }, 3943 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100, 3944 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3945 pbn_b1_2_115200 }, 3946 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100E, 3947 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3948 pbn_b2_2_115200 }, 3949 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200, 3950 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3951 pbn_b1_2_115200 }, 3952 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200E, 3953 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3954 pbn_b2_2_115200 }, 3955 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC200, 3956 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3957 pbn_b1_4_115200 }, 3958 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D, 3959 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3960 pbn_b1_8_115200 }, 3961 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M, 3962 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3963 pbn_b1_8_115200 }, 3964 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP100, 3965 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3966 pbn_b1_4_115200 }, 3967 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP100, 3968 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3969 pbn_b1_2_115200 }, 3970 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP200, 3971 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3972 pbn_b1_4_115200 }, 3973 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP200, 3974 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3975 pbn_b1_2_115200 }, 3976 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP100, 3977 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3978 pbn_b2_4_115200 }, 3979 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP100, 3980 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3981 pbn_b2_2_115200 }, 3982 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP100, 3983 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3984 pbn_b2_1_115200 }, 3985 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP200, 3986 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3987 pbn_b2_4_115200 }, 3988 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP200, 3989 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3990 pbn_b2_2_115200 }, 3991 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP200, 3992 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3993 pbn_b2_1_115200 }, 3994 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESCLP100, 3995 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3996 pbn_b0_8_115200 }, 3997 3998 { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954, 3999 PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 4000 0, 0, 4001 pbn_b0_4_921600 }, 4002 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, 4003 PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 4004 0, 0, 4005 pbn_b0_4_1152000 }, 4006 { PCI_VENDOR_ID_OXSEMI, 0x9505, 4007 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4008 pbn_b0_bt_2_921600 }, 4009 4010 /* 4011 * The below card is a little controversial since it is the 4012 * subject of a PCI vendor/device ID clash. (See 4013 * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html). 4014 * For now just used the hex ID 0x950a. 4015 */ 4016 { PCI_VENDOR_ID_OXSEMI, 0x950a, 4017 PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_00, 4018 0, 0, pbn_b0_2_115200 }, 4019 { PCI_VENDOR_ID_OXSEMI, 0x950a, 4020 PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_30, 4021 0, 0, pbn_b0_2_115200 }, 4022 { PCI_VENDOR_ID_OXSEMI, 0x950a, 4023 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4024 pbn_b0_2_1130000 }, 4025 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950, 4026 PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0, 4027 pbn_b0_1_921600 }, 4028 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, 4029 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4030 pbn_b0_4_115200 }, 4031 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952, 4032 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4033 pbn_b0_bt_2_921600 }, 4034 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958, 4035 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4036 pbn_b2_8_1152000 }, 4037 4038 /* 4039 * Oxford Semiconductor Inc. Tornado PCI express device range. 4040 */ 4041 { PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */ 4042 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4043 pbn_b0_1_4000000 }, 4044 { PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */ 4045 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4046 pbn_b0_1_4000000 }, 4047 { PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */ 4048 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4049 pbn_oxsemi_1_4000000 }, 4050 { PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */ 4051 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4052 pbn_oxsemi_1_4000000 }, 4053 { PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */ 4054 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4055 pbn_b0_1_4000000 }, 4056 { PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */ 4057 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4058 pbn_b0_1_4000000 }, 4059 { PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */ 4060 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4061 pbn_oxsemi_1_4000000 }, 4062 { PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */ 4063 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4064 pbn_oxsemi_1_4000000 }, 4065 { PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */ 4066 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4067 pbn_b0_1_4000000 }, 4068 { PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */ 4069 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4070 pbn_b0_1_4000000 }, 4071 { PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */ 4072 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4073 pbn_b0_1_4000000 }, 4074 { PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */ 4075 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4076 pbn_b0_1_4000000 }, 4077 { PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */ 4078 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4079 pbn_oxsemi_2_4000000 }, 4080 { PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */ 4081 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4082 pbn_oxsemi_2_4000000 }, 4083 { PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */ 4084 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4085 pbn_oxsemi_4_4000000 }, 4086 { PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */ 4087 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4088 pbn_oxsemi_4_4000000 }, 4089 { PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */ 4090 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4091 pbn_oxsemi_8_4000000 }, 4092 { PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */ 4093 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4094 pbn_oxsemi_8_4000000 }, 4095 { PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */ 4096 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4097 pbn_oxsemi_1_4000000 }, 4098 { PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */ 4099 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4100 pbn_oxsemi_1_4000000 }, 4101 { PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */ 4102 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4103 pbn_oxsemi_1_4000000 }, 4104 { PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */ 4105 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4106 pbn_oxsemi_1_4000000 }, 4107 { PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */ 4108 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4109 pbn_oxsemi_1_4000000 }, 4110 { PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */ 4111 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4112 pbn_oxsemi_1_4000000 }, 4113 { PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */ 4114 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4115 pbn_oxsemi_1_4000000 }, 4116 { PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */ 4117 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4118 pbn_oxsemi_1_4000000 }, 4119 { PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */ 4120 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4121 pbn_oxsemi_1_4000000 }, 4122 { PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */ 4123 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4124 pbn_oxsemi_1_4000000 }, 4125 { PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */ 4126 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4127 pbn_oxsemi_1_4000000 }, 4128 { PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */ 4129 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4130 pbn_oxsemi_1_4000000 }, 4131 { PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */ 4132 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4133 pbn_oxsemi_1_4000000 }, 4134 { PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */ 4135 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4136 pbn_oxsemi_1_4000000 }, 4137 { PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */ 4138 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4139 pbn_oxsemi_1_4000000 }, 4140 { PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */ 4141 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4142 pbn_oxsemi_1_4000000 }, 4143 { PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */ 4144 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4145 pbn_oxsemi_1_4000000 }, 4146 { PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */ 4147 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4148 pbn_oxsemi_1_4000000 }, 4149 { PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */ 4150 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4151 pbn_oxsemi_1_4000000 }, 4152 { PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */ 4153 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4154 pbn_oxsemi_1_4000000 }, 4155 { PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */ 4156 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4157 pbn_oxsemi_1_4000000 }, 4158 { PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */ 4159 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4160 pbn_oxsemi_1_4000000 }, 4161 { PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */ 4162 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4163 pbn_oxsemi_1_4000000 }, 4164 { PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */ 4165 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4166 pbn_oxsemi_1_4000000 }, 4167 { PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */ 4168 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4169 pbn_oxsemi_1_4000000 }, 4170 { PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */ 4171 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4172 pbn_oxsemi_1_4000000 }, 4173 /* 4174 * Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado 4175 */ 4176 { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */ 4177 PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0, 4178 pbn_oxsemi_1_4000000 }, 4179 { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */ 4180 PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0, 4181 pbn_oxsemi_2_4000000 }, 4182 { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */ 4183 PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0, 4184 pbn_oxsemi_4_4000000 }, 4185 { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */ 4186 PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0, 4187 pbn_oxsemi_8_4000000 }, 4188 4189 /* 4190 * Digi/IBM PCIe 2-port Async EIA-232 Adapter utilizing OxSemi Tornado 4191 */ 4192 { PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM, 4193 PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0, 4194 pbn_oxsemi_2_4000000 }, 4195 4196 /* 4197 * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards, 4198 * from skokodyn@yahoo.com 4199 */ 4200 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, 4201 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0, 4202 pbn_sbsxrsio }, 4203 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, 4204 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0, 4205 pbn_sbsxrsio }, 4206 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, 4207 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0, 4208 pbn_sbsxrsio }, 4209 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, 4210 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0, 4211 pbn_sbsxrsio }, 4212 4213 /* 4214 * Digitan DS560-558, from jimd@esoft.com 4215 */ 4216 { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM, 4217 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4218 pbn_b1_1_115200 }, 4219 4220 /* 4221 * Titan Electronic cards 4222 * The 400L and 800L have a custom setup quirk. 4223 */ 4224 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100, 4225 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4226 pbn_b0_1_921600 }, 4227 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200, 4228 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4229 pbn_b0_2_921600 }, 4230 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400, 4231 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4232 pbn_b0_4_921600 }, 4233 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B, 4234 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4235 pbn_b0_4_921600 }, 4236 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L, 4237 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4238 pbn_b1_1_921600 }, 4239 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L, 4240 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4241 pbn_b1_bt_2_921600 }, 4242 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L, 4243 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4244 pbn_b0_bt_4_921600 }, 4245 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L, 4246 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4247 pbn_b0_bt_8_921600 }, 4248 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I, 4249 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4250 pbn_b4_bt_2_921600 }, 4251 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I, 4252 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4253 pbn_b4_bt_4_921600 }, 4254 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I, 4255 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4256 pbn_b4_bt_8_921600 }, 4257 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH, 4258 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4259 pbn_b0_4_921600 }, 4260 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH, 4261 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4262 pbn_b0_4_921600 }, 4263 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB, 4264 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4265 pbn_b0_4_921600 }, 4266 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E, 4267 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4268 pbn_oxsemi_1_4000000 }, 4269 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E, 4270 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4271 pbn_oxsemi_2_4000000 }, 4272 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E, 4273 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4274 pbn_oxsemi_4_4000000 }, 4275 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E, 4276 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4277 pbn_oxsemi_8_4000000 }, 4278 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI, 4279 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4280 pbn_oxsemi_2_4000000 }, 4281 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI, 4282 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4283 pbn_oxsemi_2_4000000 }, 4284 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200V3, 4285 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4286 pbn_b0_bt_2_921600 }, 4287 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400V3, 4288 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4289 pbn_b0_4_921600 }, 4290 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_410V3, 4291 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4292 pbn_b0_4_921600 }, 4293 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3, 4294 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4295 pbn_b0_4_921600 }, 4296 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3B, 4297 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4298 pbn_b0_4_921600 }, 4299 4300 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550, 4301 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4302 pbn_b2_1_460800 }, 4303 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650, 4304 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4305 pbn_b2_1_460800 }, 4306 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850, 4307 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4308 pbn_b2_1_460800 }, 4309 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550, 4310 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4311 pbn_b2_bt_2_921600 }, 4312 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650, 4313 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4314 pbn_b2_bt_2_921600 }, 4315 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850, 4316 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4317 pbn_b2_bt_2_921600 }, 4318 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550, 4319 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4320 pbn_b2_bt_4_921600 }, 4321 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650, 4322 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4323 pbn_b2_bt_4_921600 }, 4324 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850, 4325 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4326 pbn_b2_bt_4_921600 }, 4327 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550, 4328 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4329 pbn_b0_1_921600 }, 4330 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650, 4331 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4332 pbn_b0_1_921600 }, 4333 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850, 4334 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4335 pbn_b0_1_921600 }, 4336 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550, 4337 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4338 pbn_b0_bt_2_921600 }, 4339 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650, 4340 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4341 pbn_b0_bt_2_921600 }, 4342 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850, 4343 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4344 pbn_b0_bt_2_921600 }, 4345 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550, 4346 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4347 pbn_b0_bt_4_921600 }, 4348 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650, 4349 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4350 pbn_b0_bt_4_921600 }, 4351 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850, 4352 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4353 pbn_b0_bt_4_921600 }, 4354 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550, 4355 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4356 pbn_b0_bt_8_921600 }, 4357 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650, 4358 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4359 pbn_b0_bt_8_921600 }, 4360 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850, 4361 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4362 pbn_b0_bt_8_921600 }, 4363 4364 /* 4365 * Computone devices submitted by Doug McNash dmcnash@computone.com 4366 */ 4367 { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, 4368 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4, 4369 0, 0, pbn_computone_4 }, 4370 { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, 4371 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8, 4372 0, 0, pbn_computone_8 }, 4373 { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, 4374 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6, 4375 0, 0, pbn_computone_6 }, 4376 4377 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N, 4378 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4379 pbn_oxsemi }, 4380 { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889, 4381 PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0, 4382 pbn_b0_bt_1_921600 }, 4383 4384 /* 4385 * SUNIX (TIMEDIA) 4386 */ 4387 { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, 4388 PCI_VENDOR_ID_SUNIX, PCI_ANY_ID, 4389 PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xffff00, 4390 pbn_b0_bt_1_921600 }, 4391 4392 { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, 4393 PCI_VENDOR_ID_SUNIX, PCI_ANY_ID, 4394 PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, 4395 pbn_b0_bt_1_921600 }, 4396 4397 /* 4398 * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org> 4399 */ 4400 { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028, 4401 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4402 pbn_b0_bt_8_115200 }, 4403 { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030, 4404 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4405 pbn_b0_bt_8_115200 }, 4406 4407 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL, 4408 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4409 pbn_b0_bt_2_115200 }, 4410 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A, 4411 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4412 pbn_b0_bt_2_115200 }, 4413 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, 4414 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4415 pbn_b0_bt_2_115200 }, 4416 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A, 4417 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4418 pbn_b0_bt_2_115200 }, 4419 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B, 4420 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4421 pbn_b0_bt_2_115200 }, 4422 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, 4423 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4424 pbn_b0_bt_4_460800 }, 4425 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B, 4426 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4427 pbn_b0_bt_4_460800 }, 4428 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS, 4429 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4430 pbn_b0_bt_2_460800 }, 4431 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A, 4432 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4433 pbn_b0_bt_2_460800 }, 4434 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B, 4435 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4436 pbn_b0_bt_2_460800 }, 4437 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL, 4438 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4439 pbn_b0_bt_1_115200 }, 4440 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650, 4441 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4442 pbn_b0_bt_1_460800 }, 4443 4444 /* 4445 * Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408). 4446 * Cards are identified by their subsystem vendor IDs, which 4447 * (in hex) match the model number. 4448 * 4449 * Note that JC140x are RS422/485 cards which require ox950 4450 * ACR = 0x10, and as such are not currently fully supported. 4451 */ 4452 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, 4453 0x1204, 0x0004, 0, 0, 4454 pbn_b0_4_921600 }, 4455 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, 4456 0x1208, 0x0004, 0, 0, 4457 pbn_b0_4_921600 }, 4458 /* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, 4459 0x1402, 0x0002, 0, 0, 4460 pbn_b0_2_921600 }, */ 4461 /* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, 4462 0x1404, 0x0004, 0, 0, 4463 pbn_b0_4_921600 }, */ 4464 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1, 4465 0x1208, 0x0004, 0, 0, 4466 pbn_b0_4_921600 }, 4467 4468 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, 4469 0x1204, 0x0004, 0, 0, 4470 pbn_b0_4_921600 }, 4471 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, 4472 0x1208, 0x0004, 0, 0, 4473 pbn_b0_4_921600 }, 4474 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF3, 4475 0x1208, 0x0004, 0, 0, 4476 pbn_b0_4_921600 }, 4477 /* 4478 * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com 4479 */ 4480 { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4, 4481 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4482 pbn_b1_1_1382400 }, 4483 4484 /* 4485 * Dell Remote Access Card III - Tim_T_Murphy@Dell.com 4486 */ 4487 { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII, 4488 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4489 pbn_b1_1_1382400 }, 4490 4491 /* 4492 * RAStel 2 port modem, gerg@moreton.com.au 4493 */ 4494 { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT, 4495 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4496 pbn_b2_bt_2_115200 }, 4497 4498 /* 4499 * EKF addition for i960 Boards form EKF with serial port 4500 */ 4501 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP, 4502 0xE4BF, PCI_ANY_ID, 0, 0, 4503 pbn_intel_i960 }, 4504 4505 /* 4506 * Xircom Cardbus/Ethernet combos 4507 */ 4508 { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM, 4509 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4510 pbn_b0_1_115200 }, 4511 /* 4512 * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry) 4513 */ 4514 { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G, 4515 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4516 pbn_b0_1_115200 }, 4517 4518 /* 4519 * Untested PCI modems, sent in from various folks... 4520 */ 4521 4522 /* 4523 * Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de> 4524 */ 4525 { PCI_VENDOR_ID_ROCKWELL, 0x1004, 4526 0x1048, 0x1500, 0, 0, 4527 pbn_b1_1_115200 }, 4528 4529 { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, 4530 0xFF00, 0, 0, 0, 4531 pbn_sgi_ioc3 }, 4532 4533 /* 4534 * HP Diva card 4535 */ 4536 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, 4537 PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0, 4538 pbn_b1_1_115200 }, 4539 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, 4540 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4541 pbn_b0_5_115200 }, 4542 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX, 4543 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4544 pbn_b2_1_115200 }, 4545 4546 { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2, 4547 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4548 pbn_b3_2_115200 }, 4549 { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4, 4550 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4551 pbn_b3_4_115200 }, 4552 { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8, 4553 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4554 pbn_b3_8_115200 }, 4555 /* 4556 * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART 4557 */ 4558 { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7951, 4559 PCI_ANY_ID, PCI_ANY_ID, 4560 0, 4561 0, pbn_pericom_PI7C9X7951 }, 4562 { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7952, 4563 PCI_ANY_ID, PCI_ANY_ID, 4564 0, 4565 0, pbn_pericom_PI7C9X7952 }, 4566 { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7954, 4567 PCI_ANY_ID, PCI_ANY_ID, 4568 0, 4569 0, pbn_pericom_PI7C9X7954 }, 4570 { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7958, 4571 PCI_ANY_ID, PCI_ANY_ID, 4572 0, 4573 0, pbn_pericom_PI7C9X7958 }, 4574 /* 4575 * ACCES I/O Products quad 4576 */ 4577 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB, 4578 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4579 pbn_pericom_PI7C9X7954 }, 4580 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S, 4581 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4582 pbn_pericom_PI7C9X7954 }, 4583 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB, 4584 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4585 pbn_pericom_PI7C9X7954 }, 4586 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S, 4587 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4588 pbn_pericom_PI7C9X7954 }, 4589 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB, 4590 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4591 pbn_pericom_PI7C9X7954 }, 4592 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2, 4593 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4594 pbn_pericom_PI7C9X7954 }, 4595 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB, 4596 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4597 pbn_pericom_PI7C9X7954 }, 4598 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4, 4599 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4600 pbn_pericom_PI7C9X7954 }, 4601 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB, 4602 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4603 pbn_pericom_PI7C9X7954 }, 4604 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM, 4605 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4606 pbn_pericom_PI7C9X7954 }, 4607 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB, 4608 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4609 pbn_pericom_PI7C9X7954 }, 4610 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM, 4611 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4612 pbn_pericom_PI7C9X7954 }, 4613 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1, 4614 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4615 pbn_pericom_PI7C9X7954 }, 4616 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2, 4617 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4618 pbn_pericom_PI7C9X7954 }, 4619 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2, 4620 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4621 pbn_pericom_PI7C9X7954 }, 4622 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4, 4623 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4624 pbn_pericom_PI7C9X7954 }, 4625 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4, 4626 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4627 pbn_pericom_PI7C9X7954 }, 4628 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S, 4629 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4630 pbn_pericom_PI7C9X7954 }, 4631 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S, 4632 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4633 pbn_pericom_PI7C9X7954 }, 4634 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2, 4635 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4636 pbn_pericom_PI7C9X7954 }, 4637 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2, 4638 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4639 pbn_pericom_PI7C9X7954 }, 4640 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4, 4641 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4642 pbn_pericom_PI7C9X7954 }, 4643 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4, 4644 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4645 pbn_pericom_PI7C9X7954 }, 4646 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM, 4647 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4648 pbn_pericom_PI7C9X7954 }, 4649 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4, 4650 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4651 pbn_pericom_PI7C9X7958 }, 4652 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4, 4653 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4654 pbn_pericom_PI7C9X7958 }, 4655 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8, 4656 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4657 pbn_pericom_PI7C9X7958 }, 4658 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_8, 4659 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4660 pbn_pericom_PI7C9X7958 }, 4661 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4, 4662 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4663 pbn_pericom_PI7C9X7958 }, 4664 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8, 4665 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4666 pbn_pericom_PI7C9X7958 }, 4667 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM, 4668 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4669 pbn_pericom_PI7C9X7958 }, 4670 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM, 4671 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4672 pbn_pericom_PI7C9X7958 }, 4673 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM, 4674 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4675 pbn_pericom_PI7C9X7958 }, 4676 /* 4677 * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke) 4678 */ 4679 { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560, 4680 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4681 pbn_b0_1_115200 }, 4682 /* 4683 * ITE 4684 */ 4685 { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872, 4686 PCI_ANY_ID, PCI_ANY_ID, 4687 0, 0, 4688 pbn_b1_bt_1_115200 }, 4689 4690 /* 4691 * IntaShield IS-200 4692 */ 4693 { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200, 4694 PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */ 4695 pbn_b2_2_115200 }, 4696 /* 4697 * IntaShield IS-400 4698 */ 4699 { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400, 4700 PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */ 4701 pbn_b2_4_115200 }, 4702 /* 4703 * BrainBoxes UC-260 4704 */ 4705 { PCI_VENDOR_ID_INTASHIELD, 0x0D21, 4706 PCI_ANY_ID, PCI_ANY_ID, 4707 PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, 4708 pbn_b2_4_115200 }, 4709 { PCI_VENDOR_ID_INTASHIELD, 0x0E34, 4710 PCI_ANY_ID, PCI_ANY_ID, 4711 PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, 4712 pbn_b2_4_115200 }, 4713 /* 4714 * Perle PCI-RAS cards 4715 */ 4716 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, 4717 PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4, 4718 0, 0, pbn_b2_4_921600 }, 4719 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, 4720 PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8, 4721 0, 0, pbn_b2_8_921600 }, 4722 4723 /* 4724 * Mainpine series cards: Fairly standard layout but fools 4725 * parts of the autodetect in some cases and uses otherwise 4726 * unmatched communications subclasses in the PCI Express case 4727 */ 4728 4729 { /* RockForceDUO */ 4730 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4731 PCI_VENDOR_ID_MAINPINE, 0x0200, 4732 0, 0, pbn_b0_2_115200 }, 4733 { /* RockForceQUATRO */ 4734 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4735 PCI_VENDOR_ID_MAINPINE, 0x0300, 4736 0, 0, pbn_b0_4_115200 }, 4737 { /* RockForceDUO+ */ 4738 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4739 PCI_VENDOR_ID_MAINPINE, 0x0400, 4740 0, 0, pbn_b0_2_115200 }, 4741 { /* RockForceQUATRO+ */ 4742 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4743 PCI_VENDOR_ID_MAINPINE, 0x0500, 4744 0, 0, pbn_b0_4_115200 }, 4745 { /* RockForce+ */ 4746 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4747 PCI_VENDOR_ID_MAINPINE, 0x0600, 4748 0, 0, pbn_b0_2_115200 }, 4749 { /* RockForce+ */ 4750 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4751 PCI_VENDOR_ID_MAINPINE, 0x0700, 4752 0, 0, pbn_b0_4_115200 }, 4753 { /* RockForceOCTO+ */ 4754 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4755 PCI_VENDOR_ID_MAINPINE, 0x0800, 4756 0, 0, pbn_b0_8_115200 }, 4757 { /* RockForceDUO+ */ 4758 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4759 PCI_VENDOR_ID_MAINPINE, 0x0C00, 4760 0, 0, pbn_b0_2_115200 }, 4761 { /* RockForceQUARTRO+ */ 4762 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4763 PCI_VENDOR_ID_MAINPINE, 0x0D00, 4764 0, 0, pbn_b0_4_115200 }, 4765 { /* RockForceOCTO+ */ 4766 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4767 PCI_VENDOR_ID_MAINPINE, 0x1D00, 4768 0, 0, pbn_b0_8_115200 }, 4769 { /* RockForceD1 */ 4770 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4771 PCI_VENDOR_ID_MAINPINE, 0x2000, 4772 0, 0, pbn_b0_1_115200 }, 4773 { /* RockForceF1 */ 4774 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4775 PCI_VENDOR_ID_MAINPINE, 0x2100, 4776 0, 0, pbn_b0_1_115200 }, 4777 { /* RockForceD2 */ 4778 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4779 PCI_VENDOR_ID_MAINPINE, 0x2200, 4780 0, 0, pbn_b0_2_115200 }, 4781 { /* RockForceF2 */ 4782 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4783 PCI_VENDOR_ID_MAINPINE, 0x2300, 4784 0, 0, pbn_b0_2_115200 }, 4785 { /* RockForceD4 */ 4786 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4787 PCI_VENDOR_ID_MAINPINE, 0x2400, 4788 0, 0, pbn_b0_4_115200 }, 4789 { /* RockForceF4 */ 4790 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4791 PCI_VENDOR_ID_MAINPINE, 0x2500, 4792 0, 0, pbn_b0_4_115200 }, 4793 { /* RockForceD8 */ 4794 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4795 PCI_VENDOR_ID_MAINPINE, 0x2600, 4796 0, 0, pbn_b0_8_115200 }, 4797 { /* RockForceF8 */ 4798 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4799 PCI_VENDOR_ID_MAINPINE, 0x2700, 4800 0, 0, pbn_b0_8_115200 }, 4801 { /* IQ Express D1 */ 4802 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4803 PCI_VENDOR_ID_MAINPINE, 0x3000, 4804 0, 0, pbn_b0_1_115200 }, 4805 { /* IQ Express F1 */ 4806 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4807 PCI_VENDOR_ID_MAINPINE, 0x3100, 4808 0, 0, pbn_b0_1_115200 }, 4809 { /* IQ Express D2 */ 4810 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4811 PCI_VENDOR_ID_MAINPINE, 0x3200, 4812 0, 0, pbn_b0_2_115200 }, 4813 { /* IQ Express F2 */ 4814 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4815 PCI_VENDOR_ID_MAINPINE, 0x3300, 4816 0, 0, pbn_b0_2_115200 }, 4817 { /* IQ Express D4 */ 4818 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4819 PCI_VENDOR_ID_MAINPINE, 0x3400, 4820 0, 0, pbn_b0_4_115200 }, 4821 { /* IQ Express F4 */ 4822 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4823 PCI_VENDOR_ID_MAINPINE, 0x3500, 4824 0, 0, pbn_b0_4_115200 }, 4825 { /* IQ Express D8 */ 4826 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4827 PCI_VENDOR_ID_MAINPINE, 0x3C00, 4828 0, 0, pbn_b0_8_115200 }, 4829 { /* IQ Express F8 */ 4830 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4831 PCI_VENDOR_ID_MAINPINE, 0x3D00, 4832 0, 0, pbn_b0_8_115200 }, 4833 4834 4835 /* 4836 * PA Semi PA6T-1682M on-chip UART 4837 */ 4838 { PCI_VENDOR_ID_PASEMI, 0xa004, 4839 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4840 pbn_pasemi_1682M }, 4841 4842 /* 4843 * National Instruments 4844 */ 4845 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI23216, 4846 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4847 pbn_b1_16_115200 }, 4848 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2328, 4849 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4850 pbn_b1_8_115200 }, 4851 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324, 4852 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4853 pbn_b1_bt_4_115200 }, 4854 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322, 4855 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4856 pbn_b1_bt_2_115200 }, 4857 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324I, 4858 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4859 pbn_b1_bt_4_115200 }, 4860 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322I, 4861 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4862 pbn_b1_bt_2_115200 }, 4863 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_23216, 4864 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4865 pbn_b1_16_115200 }, 4866 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2328, 4867 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4868 pbn_b1_8_115200 }, 4869 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2324, 4870 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4871 pbn_b1_bt_4_115200 }, 4872 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2322, 4873 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4874 pbn_b1_bt_2_115200 }, 4875 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2324, 4876 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4877 pbn_b1_bt_4_115200 }, 4878 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2322, 4879 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4880 pbn_b1_bt_2_115200 }, 4881 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2322, 4882 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4883 pbn_ni8430_2 }, 4884 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2322, 4885 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4886 pbn_ni8430_2 }, 4887 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2324, 4888 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4889 pbn_ni8430_4 }, 4890 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2324, 4891 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4892 pbn_ni8430_4 }, 4893 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2328, 4894 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4895 pbn_ni8430_8 }, 4896 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2328, 4897 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4898 pbn_ni8430_8 }, 4899 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_23216, 4900 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4901 pbn_ni8430_16 }, 4902 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_23216, 4903 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4904 pbn_ni8430_16 }, 4905 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2322, 4906 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4907 pbn_ni8430_2 }, 4908 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2322, 4909 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4910 pbn_ni8430_2 }, 4911 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2324, 4912 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4913 pbn_ni8430_4 }, 4914 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324, 4915 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4916 pbn_ni8430_4 }, 4917 4918 /* 4919 * ADDI-DATA GmbH communication cards <info@addi-data.com> 4920 */ 4921 { PCI_VENDOR_ID_ADDIDATA, 4922 PCI_DEVICE_ID_ADDIDATA_APCI7500, 4923 PCI_ANY_ID, 4924 PCI_ANY_ID, 4925 0, 4926 0, 4927 pbn_b0_4_115200 }, 4928 4929 { PCI_VENDOR_ID_ADDIDATA, 4930 PCI_DEVICE_ID_ADDIDATA_APCI7420, 4931 PCI_ANY_ID, 4932 PCI_ANY_ID, 4933 0, 4934 0, 4935 pbn_b0_2_115200 }, 4936 4937 { PCI_VENDOR_ID_ADDIDATA, 4938 PCI_DEVICE_ID_ADDIDATA_APCI7300, 4939 PCI_ANY_ID, 4940 PCI_ANY_ID, 4941 0, 4942 0, 4943 pbn_b0_1_115200 }, 4944 4945 { PCI_VENDOR_ID_AMCC, 4946 PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800, 4947 PCI_ANY_ID, 4948 PCI_ANY_ID, 4949 0, 4950 0, 4951 pbn_b1_8_115200 }, 4952 4953 { PCI_VENDOR_ID_ADDIDATA, 4954 PCI_DEVICE_ID_ADDIDATA_APCI7500_2, 4955 PCI_ANY_ID, 4956 PCI_ANY_ID, 4957 0, 4958 0, 4959 pbn_b0_4_115200 }, 4960 4961 { PCI_VENDOR_ID_ADDIDATA, 4962 PCI_DEVICE_ID_ADDIDATA_APCI7420_2, 4963 PCI_ANY_ID, 4964 PCI_ANY_ID, 4965 0, 4966 0, 4967 pbn_b0_2_115200 }, 4968 4969 { PCI_VENDOR_ID_ADDIDATA, 4970 PCI_DEVICE_ID_ADDIDATA_APCI7300_2, 4971 PCI_ANY_ID, 4972 PCI_ANY_ID, 4973 0, 4974 0, 4975 pbn_b0_1_115200 }, 4976 4977 { PCI_VENDOR_ID_ADDIDATA, 4978 PCI_DEVICE_ID_ADDIDATA_APCI7500_3, 4979 PCI_ANY_ID, 4980 PCI_ANY_ID, 4981 0, 4982 0, 4983 pbn_b0_4_115200 }, 4984 4985 { PCI_VENDOR_ID_ADDIDATA, 4986 PCI_DEVICE_ID_ADDIDATA_APCI7420_3, 4987 PCI_ANY_ID, 4988 PCI_ANY_ID, 4989 0, 4990 0, 4991 pbn_b0_2_115200 }, 4992 4993 { PCI_VENDOR_ID_ADDIDATA, 4994 PCI_DEVICE_ID_ADDIDATA_APCI7300_3, 4995 PCI_ANY_ID, 4996 PCI_ANY_ID, 4997 0, 4998 0, 4999 pbn_b0_1_115200 }, 5000 5001 { PCI_VENDOR_ID_ADDIDATA, 5002 PCI_DEVICE_ID_ADDIDATA_APCI7800_3, 5003 PCI_ANY_ID, 5004 PCI_ANY_ID, 5005 0, 5006 0, 5007 pbn_b0_8_115200 }, 5008 5009 { PCI_VENDOR_ID_ADDIDATA, 5010 PCI_DEVICE_ID_ADDIDATA_APCIe7500, 5011 PCI_ANY_ID, 5012 PCI_ANY_ID, 5013 0, 5014 0, 5015 pbn_ADDIDATA_PCIe_4_3906250 }, 5016 5017 { PCI_VENDOR_ID_ADDIDATA, 5018 PCI_DEVICE_ID_ADDIDATA_APCIe7420, 5019 PCI_ANY_ID, 5020 PCI_ANY_ID, 5021 0, 5022 0, 5023 pbn_ADDIDATA_PCIe_2_3906250 }, 5024 5025 { PCI_VENDOR_ID_ADDIDATA, 5026 PCI_DEVICE_ID_ADDIDATA_APCIe7300, 5027 PCI_ANY_ID, 5028 PCI_ANY_ID, 5029 0, 5030 0, 5031 pbn_ADDIDATA_PCIe_1_3906250 }, 5032 5033 { PCI_VENDOR_ID_ADDIDATA, 5034 PCI_DEVICE_ID_ADDIDATA_APCIe7800, 5035 PCI_ANY_ID, 5036 PCI_ANY_ID, 5037 0, 5038 0, 5039 pbn_ADDIDATA_PCIe_8_3906250 }, 5040 5041 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, 5042 PCI_VENDOR_ID_IBM, 0x0299, 5043 0, 0, pbn_b0_bt_2_115200 }, 5044 5045 /* 5046 * other NetMos 9835 devices are most likely handled by the 5047 * parport_serial driver, check drivers/parport/parport_serial.c 5048 * before adding them here. 5049 */ 5050 5051 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, 5052 0xA000, 0x1000, 5053 0, 0, pbn_b0_1_115200 }, 5054 5055 /* the 9901 is a rebranded 9912 */ 5056 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912, 5057 0xA000, 0x1000, 5058 0, 0, pbn_b0_1_115200 }, 5059 5060 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922, 5061 0xA000, 0x1000, 5062 0, 0, pbn_b0_1_115200 }, 5063 5064 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9904, 5065 0xA000, 0x1000, 5066 0, 0, pbn_b0_1_115200 }, 5067 5068 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, 5069 0xA000, 0x1000, 5070 0, 0, pbn_b0_1_115200 }, 5071 5072 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, 5073 0xA000, 0x3002, 5074 0, 0, pbn_NETMOS9900_2s_115200 }, 5075 5076 /* 5077 * Best Connectivity and Rosewill PCI Multi I/O cards 5078 */ 5079 5080 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, 5081 0xA000, 0x1000, 5082 0, 0, pbn_b0_1_115200 }, 5083 5084 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, 5085 0xA000, 0x3002, 5086 0, 0, pbn_b0_bt_2_115200 }, 5087 5088 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, 5089 0xA000, 0x3004, 5090 0, 0, pbn_b0_bt_4_115200 }, 5091 /* Intel CE4100 */ 5092 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART, 5093 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5094 pbn_ce4100_1_115200 }, 5095 5096 /* 5097 * Cronyx Omega PCI 5098 */ 5099 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA, 5100 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5101 pbn_omegapci }, 5102 5103 /* 5104 * Broadcom TruManage 5105 */ 5106 { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE, 5107 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5108 pbn_brcm_trumanage }, 5109 5110 /* 5111 * AgeStar as-prs2-009 5112 */ 5113 { PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375, 5114 PCI_ANY_ID, PCI_ANY_ID, 5115 0, 0, pbn_b0_bt_2_115200 }, 5116 5117 /* 5118 * WCH CH353 series devices: The 2S1P is handled by parport_serial 5119 * so not listed here. 5120 */ 5121 { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_4S, 5122 PCI_ANY_ID, PCI_ANY_ID, 5123 0, 0, pbn_b0_bt_4_115200 }, 5124 5125 { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_2S1PF, 5126 PCI_ANY_ID, PCI_ANY_ID, 5127 0, 0, pbn_b0_bt_2_115200 }, 5128 5129 { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH355_4S, 5130 PCI_ANY_ID, PCI_ANY_ID, 5131 0, 0, pbn_b0_bt_4_115200 }, 5132 5133 { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH382_2S, 5134 PCI_ANY_ID, PCI_ANY_ID, 5135 0, 0, pbn_wch382_2 }, 5136 5137 { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S, 5138 PCI_ANY_ID, PCI_ANY_ID, 5139 0, 0, pbn_wch384_4 }, 5140 5141 /* Fintek PCI serial cards */ 5142 { PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 }, 5143 { PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 }, 5144 { PCI_DEVICE(0x1c29, 0x1112), .driver_data = pbn_fintek_12 }, 5145 5146 /* MKS Tenta SCOM-080x serial cards */ 5147 { PCI_DEVICE(0x1601, 0x0800), .driver_data = pbn_b0_4_1250000 }, 5148 { PCI_DEVICE(0x1601, 0xa801), .driver_data = pbn_b0_4_1250000 }, 5149 5150 /* Amazon PCI serial device */ 5151 { PCI_DEVICE(0x1d0f, 0x8250), .driver_data = pbn_b0_1_115200 }, 5152 5153 /* 5154 * These entries match devices with class COMMUNICATION_SERIAL, 5155 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL 5156 */ 5157 { PCI_ANY_ID, PCI_ANY_ID, 5158 PCI_ANY_ID, PCI_ANY_ID, 5159 PCI_CLASS_COMMUNICATION_SERIAL << 8, 5160 0xffff00, pbn_default }, 5161 { PCI_ANY_ID, PCI_ANY_ID, 5162 PCI_ANY_ID, PCI_ANY_ID, 5163 PCI_CLASS_COMMUNICATION_MODEM << 8, 5164 0xffff00, pbn_default }, 5165 { PCI_ANY_ID, PCI_ANY_ID, 5166 PCI_ANY_ID, PCI_ANY_ID, 5167 PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 5168 0xffff00, pbn_default }, 5169 { 0, } 5170 }; 5171 5172 static pci_ers_result_t serial8250_io_error_detected(struct pci_dev *dev, 5173 pci_channel_state_t state) 5174 { 5175 struct serial_private *priv = pci_get_drvdata(dev); 5176 5177 if (state == pci_channel_io_perm_failure) 5178 return PCI_ERS_RESULT_DISCONNECT; 5179 5180 if (priv) 5181 pciserial_detach_ports(priv); 5182 5183 pci_disable_device(dev); 5184 5185 return PCI_ERS_RESULT_NEED_RESET; 5186 } 5187 5188 static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev) 5189 { 5190 int rc; 5191 5192 rc = pci_enable_device(dev); 5193 5194 if (rc) 5195 return PCI_ERS_RESULT_DISCONNECT; 5196 5197 pci_restore_state(dev); 5198 pci_save_state(dev); 5199 5200 return PCI_ERS_RESULT_RECOVERED; 5201 } 5202 5203 static void serial8250_io_resume(struct pci_dev *dev) 5204 { 5205 struct serial_private *priv = pci_get_drvdata(dev); 5206 struct serial_private *new; 5207 5208 if (!priv) 5209 return; 5210 5211 new = pciserial_init_ports(dev, priv->board); 5212 if (!IS_ERR(new)) { 5213 pci_set_drvdata(dev, new); 5214 kfree(priv); 5215 } 5216 } 5217 5218 static const struct pci_error_handlers serial8250_err_handler = { 5219 .error_detected = serial8250_io_error_detected, 5220 .slot_reset = serial8250_io_slot_reset, 5221 .resume = serial8250_io_resume, 5222 }; 5223 5224 static struct pci_driver serial_pci_driver = { 5225 .name = "serial", 5226 .probe = pciserial_init_one, 5227 .remove = pciserial_remove_one, 5228 .driver = { 5229 .pm = &pciserial_pm_ops, 5230 }, 5231 .id_table = serial_pci_tbl, 5232 .err_handler = &serial8250_err_handler, 5233 }; 5234 5235 module_pci_driver(serial_pci_driver); 5236 5237 MODULE_LICENSE("GPL"); 5238 MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module"); 5239 MODULE_DEVICE_TABLE(pci, serial_pci_tbl); 5240