1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Probe module for 8250/16550-type PCI serial ports. 4 * 5 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. 6 * 7 * Copyright (C) 2001 Russell King, All Rights Reserved. 8 */ 9 #undef DEBUG 10 #include <linux/module.h> 11 #include <linux/pci.h> 12 #include <linux/string.h> 13 #include <linux/kernel.h> 14 #include <linux/math.h> 15 #include <linux/slab.h> 16 #include <linux/delay.h> 17 #include <linux/tty.h> 18 #include <linux/serial_reg.h> 19 #include <linux/serial_core.h> 20 #include <linux/8250_pci.h> 21 #include <linux/bitops.h> 22 23 #include <asm/byteorder.h> 24 #include <asm/io.h> 25 26 #include "8250.h" 27 #include "8250_pcilib.h" 28 29 /* 30 * init function returns: 31 * > 0 - number of ports 32 * = 0 - use board->num_ports 33 * < 0 - error 34 */ 35 struct pci_serial_quirk { 36 u32 vendor; 37 u32 device; 38 u32 subvendor; 39 u32 subdevice; 40 int (*probe)(struct pci_dev *dev); 41 int (*init)(struct pci_dev *dev); 42 int (*setup)(struct serial_private *, 43 const struct pciserial_board *, 44 struct uart_8250_port *, int); 45 void (*exit)(struct pci_dev *dev); 46 }; 47 48 struct f815xxa_data { 49 spinlock_t lock; 50 int idx; 51 }; 52 53 struct serial_private { 54 struct pci_dev *dev; 55 unsigned int nr; 56 struct pci_serial_quirk *quirk; 57 const struct pciserial_board *board; 58 int line[]; 59 }; 60 61 #define PCI_DEVICE_ID_HPE_PCI_SERIAL 0x37e 62 63 static const struct pci_device_id pci_use_msi[] = { 64 { PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, 65 0xA000, 0x1000) }, 66 { PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912, 67 0xA000, 0x1000) }, 68 { PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922, 69 0xA000, 0x1000) }, 70 { PCI_DEVICE_SUB(PCI_VENDOR_ID_ASIX, PCI_DEVICE_ID_ASIX_AX99100, 71 0xA000, 0x1000) }, 72 { PCI_DEVICE_SUB(PCI_VENDOR_ID_HP_3PAR, PCI_DEVICE_ID_HPE_PCI_SERIAL, 73 PCI_ANY_ID, PCI_ANY_ID) }, 74 { } 75 }; 76 77 static int pci_default_setup(struct serial_private*, 78 const struct pciserial_board*, struct uart_8250_port *, int); 79 80 static void moan_device(const char *str, struct pci_dev *dev) 81 { 82 pci_err(dev, "%s\n" 83 "Please send the output of lspci -vv, this\n" 84 "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" 85 "manufacturer and name of serial board or\n" 86 "modem board to <linux-serial@vger.kernel.org>.\n", 87 str, dev->vendor, dev->device, 88 dev->subsystem_vendor, dev->subsystem_device); 89 } 90 91 static int 92 setup_port(struct serial_private *priv, struct uart_8250_port *port, 93 u8 bar, unsigned int offset, int regshift) 94 { 95 return serial8250_pci_setup_port(priv->dev, port, bar, offset, regshift); 96 } 97 98 /* 99 * ADDI-DATA GmbH communication cards <info@addi-data.com> 100 */ 101 static int addidata_apci7800_setup(struct serial_private *priv, 102 const struct pciserial_board *board, 103 struct uart_8250_port *port, int idx) 104 { 105 unsigned int bar = 0, offset = board->first_offset; 106 bar = FL_GET_BASE(board->flags); 107 108 if (idx < 2) { 109 offset += idx * board->uart_offset; 110 } else if ((idx >= 2) && (idx < 4)) { 111 bar += 1; 112 offset += ((idx - 2) * board->uart_offset); 113 } else if ((idx >= 4) && (idx < 6)) { 114 bar += 2; 115 offset += ((idx - 4) * board->uart_offset); 116 } else if (idx >= 6) { 117 bar += 3; 118 offset += ((idx - 6) * board->uart_offset); 119 } 120 121 return setup_port(priv, port, bar, offset, board->reg_shift); 122 } 123 124 /* 125 * AFAVLAB uses a different mixture of BARs and offsets 126 * Not that ugly ;) -- HW 127 */ 128 static int 129 afavlab_setup(struct serial_private *priv, const struct pciserial_board *board, 130 struct uart_8250_port *port, int idx) 131 { 132 unsigned int bar, offset = board->first_offset; 133 134 bar = FL_GET_BASE(board->flags); 135 if (idx < 4) 136 bar += idx; 137 else { 138 bar = 4; 139 offset += (idx - 4) * board->uart_offset; 140 } 141 142 return setup_port(priv, port, bar, offset, board->reg_shift); 143 } 144 145 /* 146 * HP's Remote Management Console. The Diva chip came in several 147 * different versions. N-class, L2000 and A500 have two Diva chips, each 148 * with 3 UARTs (the third UART on the second chip is unused). Superdome 149 * and Keystone have one Diva chip with 3 UARTs. Some later machines have 150 * one Diva chip, but it has been expanded to 5 UARTs. 151 */ 152 static int pci_hp_diva_init(struct pci_dev *dev) 153 { 154 int rc = 0; 155 156 switch (dev->subsystem_device) { 157 case PCI_DEVICE_ID_HP_DIVA_TOSCA1: 158 case PCI_DEVICE_ID_HP_DIVA_HALFDOME: 159 case PCI_DEVICE_ID_HP_DIVA_KEYSTONE: 160 case PCI_DEVICE_ID_HP_DIVA_EVEREST: 161 rc = 3; 162 break; 163 case PCI_DEVICE_ID_HP_DIVA_TOSCA2: 164 rc = 2; 165 break; 166 case PCI_DEVICE_ID_HP_DIVA_MAESTRO: 167 rc = 4; 168 break; 169 case PCI_DEVICE_ID_HP_DIVA_POWERBAR: 170 case PCI_DEVICE_ID_HP_DIVA_HURRICANE: 171 rc = 1; 172 break; 173 } 174 175 return rc; 176 } 177 178 /* 179 * HP's Diva chip puts the 4th/5th serial port further out, and 180 * some serial ports are supposed to be hidden on certain models. 181 */ 182 static int 183 pci_hp_diva_setup(struct serial_private *priv, 184 const struct pciserial_board *board, 185 struct uart_8250_port *port, int idx) 186 { 187 unsigned int offset = board->first_offset; 188 unsigned int bar = FL_GET_BASE(board->flags); 189 190 switch (priv->dev->subsystem_device) { 191 case PCI_DEVICE_ID_HP_DIVA_MAESTRO: 192 if (idx == 3) 193 idx++; 194 break; 195 case PCI_DEVICE_ID_HP_DIVA_EVEREST: 196 if (idx > 0) 197 idx++; 198 if (idx > 2) 199 idx++; 200 break; 201 } 202 if (idx > 2) 203 offset = 0x18; 204 205 offset += idx * board->uart_offset; 206 207 return setup_port(priv, port, bar, offset, board->reg_shift); 208 } 209 210 /* 211 * Added for EKF Intel i960 serial boards 212 */ 213 static int pci_inteli960ni_init(struct pci_dev *dev) 214 { 215 u32 oldval; 216 217 if (!(dev->subsystem_device & 0x1000)) 218 return -ENODEV; 219 220 /* is firmware started? */ 221 pci_read_config_dword(dev, 0x44, &oldval); 222 if (oldval == 0x00001000L) { /* RESET value */ 223 pci_dbg(dev, "Local i960 firmware missing\n"); 224 return -ENODEV; 225 } 226 return 0; 227 } 228 229 /* 230 * Some PCI serial cards using the PLX 9050 PCI interface chip require 231 * that the card interrupt be explicitly enabled or disabled. This 232 * seems to be mainly needed on card using the PLX which also use I/O 233 * mapped memory. 234 */ 235 static int pci_plx9050_init(struct pci_dev *dev) 236 { 237 u8 irq_config; 238 void __iomem *p; 239 240 if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) { 241 moan_device("no memory in bar 0", dev); 242 return 0; 243 } 244 245 irq_config = 0x41; 246 if (dev->vendor == PCI_VENDOR_ID_PANACOM || 247 dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) 248 irq_config = 0x43; 249 250 if ((dev->vendor == PCI_VENDOR_ID_PLX) && 251 (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) 252 /* 253 * As the megawolf cards have the int pins active 254 * high, and have 2 UART chips, both ints must be 255 * enabled on the 9050. Also, the UARTS are set in 256 * 16450 mode by default, so we have to enable the 257 * 16C950 'enhanced' mode so that we can use the 258 * deep FIFOs 259 */ 260 irq_config = 0x5b; 261 /* 262 * enable/disable interrupts 263 */ 264 p = ioremap(pci_resource_start(dev, 0), 0x80); 265 if (p == NULL) 266 return -ENOMEM; 267 writel(irq_config, p + 0x4c); 268 269 /* 270 * Read the register back to ensure that it took effect. 271 */ 272 readl(p + 0x4c); 273 iounmap(p); 274 275 return 0; 276 } 277 278 static void pci_plx9050_exit(struct pci_dev *dev) 279 { 280 u8 __iomem *p; 281 282 if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) 283 return; 284 285 /* 286 * disable interrupts 287 */ 288 p = ioremap(pci_resource_start(dev, 0), 0x80); 289 if (p != NULL) { 290 writel(0, p + 0x4c); 291 292 /* 293 * Read the register back to ensure that it took effect. 294 */ 295 readl(p + 0x4c); 296 iounmap(p); 297 } 298 } 299 300 #define NI8420_INT_ENABLE_REG 0x38 301 #define NI8420_INT_ENABLE_BIT 0x2000 302 303 static void pci_ni8420_exit(struct pci_dev *dev) 304 { 305 void __iomem *p; 306 unsigned int bar = 0; 307 308 if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { 309 moan_device("no memory in bar", dev); 310 return; 311 } 312 313 p = pci_ioremap_bar(dev, bar); 314 if (p == NULL) 315 return; 316 317 /* Disable the CPU Interrupt */ 318 writel(readl(p + NI8420_INT_ENABLE_REG) & ~(NI8420_INT_ENABLE_BIT), 319 p + NI8420_INT_ENABLE_REG); 320 iounmap(p); 321 } 322 323 324 /* MITE registers */ 325 #define MITE_IOWBSR1 0xc4 326 #define MITE_IOWCR1 0xf4 327 #define MITE_LCIMR1 0x08 328 #define MITE_LCIMR2 0x10 329 330 #define MITE_LCIMR2_CLR_CPU_IE (1 << 30) 331 332 static void pci_ni8430_exit(struct pci_dev *dev) 333 { 334 void __iomem *p; 335 unsigned int bar = 0; 336 337 if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { 338 moan_device("no memory in bar", dev); 339 return; 340 } 341 342 p = pci_ioremap_bar(dev, bar); 343 if (p == NULL) 344 return; 345 346 /* Disable the CPU Interrupt */ 347 writel(MITE_LCIMR2_CLR_CPU_IE, p + MITE_LCIMR2); 348 iounmap(p); 349 } 350 351 /* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */ 352 static int 353 sbs_setup(struct serial_private *priv, const struct pciserial_board *board, 354 struct uart_8250_port *port, int idx) 355 { 356 unsigned int bar, offset = board->first_offset; 357 358 bar = 0; 359 360 if (idx < 4) { 361 /* first four channels map to 0, 0x100, 0x200, 0x300 */ 362 offset += idx * board->uart_offset; 363 } else if (idx < 8) { 364 /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */ 365 offset += idx * board->uart_offset + 0xC00; 366 } else /* we have only 8 ports on PMC-OCTALPRO */ 367 return 1; 368 369 return setup_port(priv, port, bar, offset, board->reg_shift); 370 } 371 372 /* 373 * This does initialization for PMC OCTALPRO cards: 374 * maps the device memory, resets the UARTs (needed, bc 375 * if the module is removed and inserted again, the card 376 * is in the sleep mode) and enables global interrupt. 377 */ 378 379 /* global control register offset for SBS PMC-OctalPro */ 380 #define OCT_REG_CR_OFF 0x500 381 382 static int sbs_init(struct pci_dev *dev) 383 { 384 u8 __iomem *p; 385 386 p = pci_ioremap_bar(dev, 0); 387 388 if (p == NULL) 389 return -ENOMEM; 390 /* Set bit-4 Control Register (UART RESET) in to reset the uarts */ 391 writeb(0x10, p + OCT_REG_CR_OFF); 392 udelay(50); 393 writeb(0x0, p + OCT_REG_CR_OFF); 394 395 /* Set bit-2 (INTENABLE) of Control Register */ 396 writeb(0x4, p + OCT_REG_CR_OFF); 397 iounmap(p); 398 399 return 0; 400 } 401 402 /* 403 * Disables the global interrupt of PMC-OctalPro 404 */ 405 406 static void sbs_exit(struct pci_dev *dev) 407 { 408 u8 __iomem *p; 409 410 p = pci_ioremap_bar(dev, 0); 411 /* FIXME: What if resource_len < OCT_REG_CR_OFF */ 412 if (p != NULL) 413 writeb(0, p + OCT_REG_CR_OFF); 414 iounmap(p); 415 } 416 417 /* 418 * SIIG serial cards have an PCI interface chip which also controls 419 * the UART clocking frequency. Each UART can be clocked independently 420 * (except cards equipped with 4 UARTs) and initial clocking settings 421 * are stored in the EEPROM chip. It can cause problems because this 422 * version of serial driver doesn't support differently clocked UART's 423 * on single PCI card. To prevent this, initialization functions set 424 * high frequency clocking for all UART's on given card. It is safe (I 425 * hope) because it doesn't touch EEPROM settings to prevent conflicts 426 * with other OSes (like M$ DOS). 427 * 428 * SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999 429 * 430 * There is two family of SIIG serial cards with different PCI 431 * interface chip and different configuration methods: 432 * - 10x cards have control registers in IO and/or memory space; 433 * - 20x cards have control registers in standard PCI configuration space. 434 * 435 * Note: all 10x cards have PCI device ids 0x10.. 436 * all 20x cards have PCI device ids 0x20.. 437 * 438 * There are also Quartet Serial cards which use Oxford Semiconductor 439 * 16954 quad UART PCI chip clocked by 18.432 MHz quartz. 440 * 441 * Note: some SIIG cards are probed by the parport_serial object. 442 */ 443 444 #define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc) 445 #define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8) 446 447 static int pci_siig10x_init(struct pci_dev *dev) 448 { 449 u16 data; 450 void __iomem *p; 451 452 switch (dev->device & 0xfff8) { 453 case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */ 454 data = 0xffdf; 455 break; 456 case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */ 457 data = 0xf7ff; 458 break; 459 default: /* 1S1P, 4S */ 460 data = 0xfffb; 461 break; 462 } 463 464 p = ioremap(pci_resource_start(dev, 0), 0x80); 465 if (p == NULL) 466 return -ENOMEM; 467 468 writew(readw(p + 0x28) & data, p + 0x28); 469 readw(p + 0x28); 470 iounmap(p); 471 return 0; 472 } 473 474 #define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc) 475 #define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc) 476 477 static int pci_siig20x_init(struct pci_dev *dev) 478 { 479 u8 data; 480 481 /* Change clock frequency for the first UART. */ 482 pci_read_config_byte(dev, 0x6f, &data); 483 pci_write_config_byte(dev, 0x6f, data & 0xef); 484 485 /* If this card has 2 UART, we have to do the same with second UART. */ 486 if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) || 487 ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) { 488 pci_read_config_byte(dev, 0x73, &data); 489 pci_write_config_byte(dev, 0x73, data & 0xef); 490 } 491 return 0; 492 } 493 494 static int pci_siig_init(struct pci_dev *dev) 495 { 496 unsigned int type = dev->device & 0xff00; 497 498 if (type == 0x1000) 499 return pci_siig10x_init(dev); 500 if (type == 0x2000) 501 return pci_siig20x_init(dev); 502 503 moan_device("Unknown SIIG card", dev); 504 return -ENODEV; 505 } 506 507 static int pci_siig_setup(struct serial_private *priv, 508 const struct pciserial_board *board, 509 struct uart_8250_port *port, int idx) 510 { 511 unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0; 512 513 if (idx > 3) { 514 bar = 4; 515 offset = (idx - 4) * 8; 516 } 517 518 return setup_port(priv, port, bar, offset, 0); 519 } 520 521 /* 522 * Timedia has an explosion of boards, and to avoid the PCI table from 523 * growing *huge*, we use this function to collapse some 70 entries 524 * in the PCI table into one, for sanity's and compactness's sake. 525 */ 526 static const unsigned short timedia_single_port[] = { 527 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0 528 }; 529 530 static const unsigned short timedia_dual_port[] = { 531 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, 532 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, 533 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, 534 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, 535 0xD079, 0 536 }; 537 538 static const unsigned short timedia_quad_port[] = { 539 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, 540 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, 541 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, 542 0xB157, 0 543 }; 544 545 static const unsigned short timedia_eight_port[] = { 546 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, 547 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 548 }; 549 550 static const struct timedia_struct { 551 int num; 552 const unsigned short *ids; 553 } timedia_data[] = { 554 { 1, timedia_single_port }, 555 { 2, timedia_dual_port }, 556 { 4, timedia_quad_port }, 557 { 8, timedia_eight_port } 558 }; 559 560 /* 561 * There are nearly 70 different Timedia/SUNIX PCI serial devices. Instead of 562 * listing them individually, this driver merely grabs them all with 563 * PCI_ANY_ID. Some of these devices, however, also feature a parallel port, 564 * and should be left free to be claimed by parport_serial instead. 565 */ 566 static int pci_timedia_probe(struct pci_dev *dev) 567 { 568 /* 569 * Check the third digit of the subdevice ID 570 * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel) 571 */ 572 if ((dev->subsystem_device & 0x00f0) >= 0x70) { 573 pci_info(dev, "ignoring Timedia subdevice %04x for parport_serial\n", 574 dev->subsystem_device); 575 return -ENODEV; 576 } 577 578 return 0; 579 } 580 581 static int pci_timedia_init(struct pci_dev *dev) 582 { 583 const unsigned short *ids; 584 int i, j; 585 586 for (i = 0; i < ARRAY_SIZE(timedia_data); i++) { 587 ids = timedia_data[i].ids; 588 for (j = 0; ids[j]; j++) 589 if (dev->subsystem_device == ids[j]) 590 return timedia_data[i].num; 591 } 592 return 0; 593 } 594 595 /* 596 * Timedia/SUNIX uses a mixture of BARs and offsets 597 * Ugh, this is ugly as all hell --- TYT 598 */ 599 static int 600 pci_timedia_setup(struct serial_private *priv, 601 const struct pciserial_board *board, 602 struct uart_8250_port *port, int idx) 603 { 604 unsigned int bar = 0, offset = board->first_offset; 605 606 switch (idx) { 607 case 0: 608 bar = 0; 609 break; 610 case 1: 611 offset = board->uart_offset; 612 bar = 0; 613 break; 614 case 2: 615 bar = 1; 616 break; 617 case 3: 618 offset = board->uart_offset; 619 fallthrough; 620 case 4: /* BAR 2 */ 621 case 5: /* BAR 3 */ 622 case 6: /* BAR 4 */ 623 case 7: /* BAR 5 */ 624 bar = idx - 2; 625 } 626 627 return setup_port(priv, port, bar, offset, board->reg_shift); 628 } 629 630 /* 631 * Some Titan cards are also a little weird 632 */ 633 static int 634 titan_400l_800l_setup(struct serial_private *priv, 635 const struct pciserial_board *board, 636 struct uart_8250_port *port, int idx) 637 { 638 unsigned int bar, offset = board->first_offset; 639 640 switch (idx) { 641 case 0: 642 bar = 1; 643 break; 644 case 1: 645 bar = 2; 646 break; 647 default: 648 bar = 4; 649 offset = (idx - 2) * board->uart_offset; 650 } 651 652 return setup_port(priv, port, bar, offset, board->reg_shift); 653 } 654 655 static int pci_xircom_init(struct pci_dev *dev) 656 { 657 msleep(100); 658 return 0; 659 } 660 661 static int pci_ni8420_init(struct pci_dev *dev) 662 { 663 void __iomem *p; 664 unsigned int bar = 0; 665 666 if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { 667 moan_device("no memory in bar", dev); 668 return 0; 669 } 670 671 p = pci_ioremap_bar(dev, bar); 672 if (p == NULL) 673 return -ENOMEM; 674 675 /* Enable CPU Interrupt */ 676 writel(readl(p + NI8420_INT_ENABLE_REG) | NI8420_INT_ENABLE_BIT, 677 p + NI8420_INT_ENABLE_REG); 678 679 iounmap(p); 680 return 0; 681 } 682 683 #define MITE_IOWBSR1_WSIZE 0xa 684 #define MITE_IOWBSR1_WIN_OFFSET 0x800 685 #define MITE_IOWBSR1_WENAB (1 << 7) 686 #define MITE_LCIMR1_IO_IE_0 (1 << 24) 687 #define MITE_LCIMR2_SET_CPU_IE (1 << 31) 688 #define MITE_IOWCR1_RAMSEL_MASK 0xfffffffe 689 690 static int pci_ni8430_init(struct pci_dev *dev) 691 { 692 void __iomem *p; 693 struct pci_bus_region region; 694 u32 device_window; 695 unsigned int bar = 0; 696 697 if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { 698 moan_device("no memory in bar", dev); 699 return 0; 700 } 701 702 p = pci_ioremap_bar(dev, bar); 703 if (p == NULL) 704 return -ENOMEM; 705 706 /* 707 * Set device window address and size in BAR0, while acknowledging that 708 * the resource structure may contain a translated address that differs 709 * from the address the device responds to. 710 */ 711 pcibios_resource_to_bus(dev->bus, ®ion, &dev->resource[bar]); 712 device_window = ((region.start + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00) 713 | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE; 714 writel(device_window, p + MITE_IOWBSR1); 715 716 /* Set window access to go to RAMSEL IO address space */ 717 writel((readl(p + MITE_IOWCR1) & MITE_IOWCR1_RAMSEL_MASK), 718 p + MITE_IOWCR1); 719 720 /* Enable IO Bus Interrupt 0 */ 721 writel(MITE_LCIMR1_IO_IE_0, p + MITE_LCIMR1); 722 723 /* Enable CPU Interrupt */ 724 writel(MITE_LCIMR2_SET_CPU_IE, p + MITE_LCIMR2); 725 726 iounmap(p); 727 return 0; 728 } 729 730 /* UART Port Control Register */ 731 #define NI8430_PORTCON 0x0f 732 #define NI8430_PORTCON_TXVR_ENABLE (1 << 3) 733 734 static int 735 pci_ni8430_setup(struct serial_private *priv, 736 const struct pciserial_board *board, 737 struct uart_8250_port *port, int idx) 738 { 739 struct pci_dev *dev = priv->dev; 740 void __iomem *p; 741 unsigned int bar, offset = board->first_offset; 742 743 if (idx >= board->num_ports) 744 return 1; 745 746 bar = FL_GET_BASE(board->flags); 747 offset += idx * board->uart_offset; 748 749 p = pci_ioremap_bar(dev, bar); 750 if (!p) 751 return -ENOMEM; 752 753 /* enable the transceiver */ 754 writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE, 755 p + offset + NI8430_PORTCON); 756 757 iounmap(p); 758 759 return setup_port(priv, port, bar, offset, board->reg_shift); 760 } 761 762 static int pci_netmos_9900_setup(struct serial_private *priv, 763 const struct pciserial_board *board, 764 struct uart_8250_port *port, int idx) 765 { 766 unsigned int bar; 767 768 if ((priv->dev->device != PCI_DEVICE_ID_NETMOS_9865) && 769 (priv->dev->subsystem_device & 0xff00) == 0x3000) { 770 /* netmos apparently orders BARs by datasheet layout, so serial 771 * ports get BARs 0 and 3 (or 1 and 4 for memmapped) 772 */ 773 bar = 3 * idx; 774 775 return setup_port(priv, port, bar, 0, board->reg_shift); 776 } 777 778 return pci_default_setup(priv, board, port, idx); 779 } 780 781 /* the 99xx series comes with a range of device IDs and a variety 782 * of capabilities: 783 * 784 * 9900 has varying capabilities and can cascade to sub-controllers 785 * (cascading should be purely internal) 786 * 9904 is hardwired with 4 serial ports 787 * 9912 and 9922 are hardwired with 2 serial ports 788 */ 789 static int pci_netmos_9900_numports(struct pci_dev *dev) 790 { 791 unsigned int c = dev->class; 792 unsigned int pi; 793 unsigned short sub_serports; 794 795 pi = c & 0xff; 796 797 if (pi == 2) 798 return 1; 799 800 if ((pi == 0) && (dev->device == PCI_DEVICE_ID_NETMOS_9900)) { 801 /* two possibilities: 0x30ps encodes number of parallel and 802 * serial ports, or 0x1000 indicates *something*. This is not 803 * immediately obvious, since the 2s1p+4s configuration seems 804 * to offer all functionality on functions 0..2, while still 805 * advertising the same function 3 as the 4s+2s1p config. 806 */ 807 sub_serports = dev->subsystem_device & 0xf; 808 if (sub_serports > 0) 809 return sub_serports; 810 811 pci_err(dev, "NetMos/Mostech serial driver ignoring port on ambiguous config.\n"); 812 return 0; 813 } 814 815 moan_device("unknown NetMos/Mostech program interface", dev); 816 return 0; 817 } 818 819 static int pci_netmos_init(struct pci_dev *dev) 820 { 821 /* subdevice 0x00PS means <P> parallel, <S> serial */ 822 unsigned int num_serial = dev->subsystem_device & 0xf; 823 824 if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) || 825 (dev->device == PCI_DEVICE_ID_NETMOS_9865)) 826 return 0; 827 828 if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && 829 dev->subsystem_device == 0x0299) 830 return 0; 831 832 switch (dev->device) { /* FALLTHROUGH on all */ 833 case PCI_DEVICE_ID_NETMOS_9904: 834 case PCI_DEVICE_ID_NETMOS_9912: 835 case PCI_DEVICE_ID_NETMOS_9922: 836 case PCI_DEVICE_ID_NETMOS_9900: 837 num_serial = pci_netmos_9900_numports(dev); 838 break; 839 840 default: 841 break; 842 } 843 844 if (num_serial == 0) { 845 moan_device("unknown NetMos/Mostech device", dev); 846 return -ENODEV; 847 } 848 849 return num_serial; 850 } 851 852 /* 853 * These chips are available with optionally one parallel port and up to 854 * two serial ports. Unfortunately they all have the same product id. 855 * 856 * Basic configuration is done over a region of 32 I/O ports. The base 857 * ioport is called INTA or INTC, depending on docs/other drivers. 858 * 859 * The region of the 32 I/O ports is configured in POSIO0R... 860 */ 861 862 /* registers */ 863 #define ITE_887x_MISCR 0x9c 864 #define ITE_887x_INTCBAR 0x78 865 #define ITE_887x_UARTBAR 0x7c 866 #define ITE_887x_PS0BAR 0x10 867 #define ITE_887x_POSIO0 0x60 868 869 /* I/O space size */ 870 #define ITE_887x_IOSIZE 32 871 /* I/O space size (bits 26-24; 8 bytes = 011b) */ 872 #define ITE_887x_POSIO_IOSIZE_8 (3 << 24) 873 /* I/O space size (bits 26-24; 32 bytes = 101b) */ 874 #define ITE_887x_POSIO_IOSIZE_32 (5 << 24) 875 /* Decoding speed (1 = slow, 2 = medium, 3 = fast) */ 876 #define ITE_887x_POSIO_SPEED (3 << 29) 877 /* enable IO_Space bit */ 878 #define ITE_887x_POSIO_ENABLE (1 << 31) 879 880 /* inta_addr are the configuration addresses of the ITE */ 881 static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0, 0x200, 0x280 }; 882 static int pci_ite887x_init(struct pci_dev *dev) 883 { 884 int ret, i, type; 885 struct resource *iobase = NULL; 886 u32 miscr, uartbar, ioport; 887 888 /* search for the base-ioport */ 889 for (i = 0; i < ARRAY_SIZE(inta_addr); i++) { 890 iobase = request_region(inta_addr[i], ITE_887x_IOSIZE, 891 "ite887x"); 892 if (iobase != NULL) { 893 /* write POSIO0R - speed | size | ioport */ 894 pci_write_config_dword(dev, ITE_887x_POSIO0, 895 ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | 896 ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]); 897 /* write INTCBAR - ioport */ 898 pci_write_config_dword(dev, ITE_887x_INTCBAR, 899 inta_addr[i]); 900 ret = inb(inta_addr[i]); 901 if (ret != 0xff) { 902 /* ioport connected */ 903 break; 904 } 905 release_region(iobase->start, ITE_887x_IOSIZE); 906 } 907 } 908 909 if (i == ARRAY_SIZE(inta_addr)) { 910 pci_err(dev, "could not find iobase\n"); 911 return -ENODEV; 912 } 913 914 /* start of undocumented type checking (see parport_pc.c) */ 915 type = inb(iobase->start + 0x18) & 0x0f; 916 917 switch (type) { 918 case 0x2: /* ITE8871 (1P) */ 919 case 0xa: /* ITE8875 (1P) */ 920 ret = 0; 921 break; 922 case 0xe: /* ITE8872 (2S1P) */ 923 ret = 2; 924 break; 925 case 0x6: /* ITE8873 (1S) */ 926 ret = 1; 927 break; 928 case 0x8: /* ITE8874 (2S) */ 929 ret = 2; 930 break; 931 default: 932 moan_device("Unknown ITE887x", dev); 933 ret = -ENODEV; 934 } 935 936 /* configure all serial ports */ 937 for (i = 0; i < ret; i++) { 938 /* read the I/O port from the device */ 939 pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)), 940 &ioport); 941 ioport &= 0x0000FF00; /* the actual base address */ 942 pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)), 943 ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | 944 ITE_887x_POSIO_IOSIZE_8 | ioport); 945 946 /* write the ioport to the UARTBAR */ 947 pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar); 948 uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */ 949 uartbar |= (ioport << (16 * i)); /* set the ioport */ 950 pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar); 951 952 /* get current config */ 953 pci_read_config_dword(dev, ITE_887x_MISCR, &miscr); 954 /* disable interrupts (UARTx_Routing[3:0]) */ 955 miscr &= ~(0xf << (12 - 4 * i)); 956 /* activate the UART (UARTx_En) */ 957 miscr |= 1 << (23 - i); 958 /* write new config with activated UART */ 959 pci_write_config_dword(dev, ITE_887x_MISCR, miscr); 960 } 961 962 if (ret <= 0) { 963 /* the device has no UARTs if we get here */ 964 release_region(iobase->start, ITE_887x_IOSIZE); 965 } 966 967 return ret; 968 } 969 970 static void pci_ite887x_exit(struct pci_dev *dev) 971 { 972 u32 ioport; 973 /* the ioport is bit 0-15 in POSIO0R */ 974 pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport); 975 ioport &= 0xffff; 976 release_region(ioport, ITE_887x_IOSIZE); 977 } 978 979 /* 980 * Oxford Semiconductor Inc. 981 * Check if an OxSemi device is part of the Tornado range of devices. 982 */ 983 #define PCI_VENDOR_ID_ENDRUN 0x7401 984 #define PCI_DEVICE_ID_ENDRUN_1588 0xe100 985 986 static bool pci_oxsemi_tornado_p(struct pci_dev *dev) 987 { 988 /* OxSemi Tornado devices are all 0xCxxx */ 989 if (dev->vendor == PCI_VENDOR_ID_OXSEMI && 990 (dev->device & 0xf000) != 0xc000) 991 return false; 992 993 /* EndRun devices are all 0xExxx */ 994 if (dev->vendor == PCI_VENDOR_ID_ENDRUN && 995 (dev->device & 0xf000) != 0xe000) 996 return false; 997 998 return true; 999 } 1000 1001 /* 1002 * Determine the number of ports available on a Tornado device. 1003 */ 1004 static int pci_oxsemi_tornado_init(struct pci_dev *dev) 1005 { 1006 u8 __iomem *p; 1007 unsigned long deviceID; 1008 unsigned int number_uarts = 0; 1009 1010 if (!pci_oxsemi_tornado_p(dev)) 1011 return 0; 1012 1013 p = pci_iomap(dev, 0, 5); 1014 if (p == NULL) 1015 return -ENOMEM; 1016 1017 deviceID = ioread32(p); 1018 /* Tornado device */ 1019 if (deviceID == 0x07000200) { 1020 number_uarts = ioread8(p + 4); 1021 pci_dbg(dev, "%d ports detected on %s PCI Express device\n", 1022 number_uarts, 1023 dev->vendor == PCI_VENDOR_ID_ENDRUN ? 1024 "EndRun" : "Oxford"); 1025 } 1026 pci_iounmap(dev, p); 1027 return number_uarts; 1028 } 1029 1030 /* Tornado-specific constants for the TCR and CPR registers; see below. */ 1031 #define OXSEMI_TORNADO_TCR_MASK 0xf 1032 #define OXSEMI_TORNADO_CPR_MASK 0x1ff 1033 #define OXSEMI_TORNADO_CPR_MIN 0x008 1034 #define OXSEMI_TORNADO_CPR_DEF 0x10f 1035 1036 /* 1037 * Determine the oversampling rate, the clock prescaler, and the clock 1038 * divisor for the requested baud rate. The clock rate is 62.5 MHz, 1039 * which is four times the baud base, and the prescaler increments in 1040 * steps of 1/8. Therefore to make calculations on integers we need 1041 * to use a scaled clock rate, which is the baud base multiplied by 32 1042 * (or our assumed UART clock rate multiplied by 2). 1043 * 1044 * The allowed oversampling rates are from 4 up to 16 inclusive (values 1045 * from 0 to 3 inclusive map to 16). Likewise the clock prescaler allows 1046 * values between 1.000 and 63.875 inclusive (operation for values from 1047 * 0.000 to 0.875 has not been specified). The clock divisor is the usual 1048 * unsigned 16-bit integer. 1049 * 1050 * For the most accurate baud rate we use a table of predetermined 1051 * oversampling rates and clock prescalers that records all possible 1052 * products of the two parameters in the range from 4 up to 255 inclusive, 1053 * and additionally 335 for the 1500000bps rate, with the prescaler scaled 1054 * by 8. The table is sorted by the decreasing value of the oversampling 1055 * rate and ties are resolved by sorting by the decreasing value of the 1056 * product. This way preference is given to higher oversampling rates. 1057 * 1058 * We iterate over the table and choose the product of an oversampling 1059 * rate and a clock prescaler that gives the lowest integer division 1060 * result deviation, or if an exact integer divider is found we stop 1061 * looking for it right away. We do some fixup if the resulting clock 1062 * divisor required would be out of its unsigned 16-bit integer range. 1063 * 1064 * Finally we abuse the supposed fractional part returned to encode the 1065 * 4-bit value of the oversampling rate and the 9-bit value of the clock 1066 * prescaler which will end up in the TCR and CPR/CPR2 registers. 1067 */ 1068 static unsigned int pci_oxsemi_tornado_get_divisor(struct uart_port *port, 1069 unsigned int baud, 1070 unsigned int *frac) 1071 { 1072 static u8 p[][2] = { 1073 { 16, 14, }, { 16, 13, }, { 16, 12, }, { 16, 11, }, 1074 { 16, 10, }, { 16, 9, }, { 16, 8, }, { 15, 17, }, 1075 { 15, 16, }, { 15, 15, }, { 15, 14, }, { 15, 13, }, 1076 { 15, 12, }, { 15, 11, }, { 15, 10, }, { 15, 9, }, 1077 { 15, 8, }, { 14, 18, }, { 14, 17, }, { 14, 14, }, 1078 { 14, 13, }, { 14, 12, }, { 14, 11, }, { 14, 10, }, 1079 { 14, 9, }, { 14, 8, }, { 13, 19, }, { 13, 18, }, 1080 { 13, 17, }, { 13, 13, }, { 13, 12, }, { 13, 11, }, 1081 { 13, 10, }, { 13, 9, }, { 13, 8, }, { 12, 19, }, 1082 { 12, 18, }, { 12, 17, }, { 12, 11, }, { 12, 9, }, 1083 { 12, 8, }, { 11, 23, }, { 11, 22, }, { 11, 21, }, 1084 { 11, 20, }, { 11, 19, }, { 11, 18, }, { 11, 17, }, 1085 { 11, 11, }, { 11, 10, }, { 11, 9, }, { 11, 8, }, 1086 { 10, 25, }, { 10, 23, }, { 10, 20, }, { 10, 19, }, 1087 { 10, 17, }, { 10, 10, }, { 10, 9, }, { 10, 8, }, 1088 { 9, 27, }, { 9, 23, }, { 9, 21, }, { 9, 19, }, 1089 { 9, 18, }, { 9, 17, }, { 9, 9, }, { 9, 8, }, 1090 { 8, 31, }, { 8, 29, }, { 8, 23, }, { 8, 19, }, 1091 { 8, 17, }, { 8, 8, }, { 7, 35, }, { 7, 31, }, 1092 { 7, 29, }, { 7, 25, }, { 7, 23, }, { 7, 21, }, 1093 { 7, 19, }, { 7, 17, }, { 7, 15, }, { 7, 14, }, 1094 { 7, 13, }, { 7, 12, }, { 7, 11, }, { 7, 10, }, 1095 { 7, 9, }, { 7, 8, }, { 6, 41, }, { 6, 37, }, 1096 { 6, 31, }, { 6, 29, }, { 6, 23, }, { 6, 19, }, 1097 { 6, 17, }, { 6, 13, }, { 6, 11, }, { 6, 10, }, 1098 { 6, 9, }, { 6, 8, }, { 5, 67, }, { 5, 47, }, 1099 { 5, 43, }, { 5, 41, }, { 5, 37, }, { 5, 31, }, 1100 { 5, 29, }, { 5, 25, }, { 5, 23, }, { 5, 19, }, 1101 { 5, 17, }, { 5, 15, }, { 5, 13, }, { 5, 11, }, 1102 { 5, 10, }, { 5, 9, }, { 5, 8, }, { 4, 61, }, 1103 { 4, 59, }, { 4, 53, }, { 4, 47, }, { 4, 43, }, 1104 { 4, 41, }, { 4, 37, }, { 4, 31, }, { 4, 29, }, 1105 { 4, 23, }, { 4, 19, }, { 4, 17, }, { 4, 13, }, 1106 { 4, 9, }, { 4, 8, }, 1107 }; 1108 /* Scale the quotient for comparison to get the fractional part. */ 1109 const unsigned int quot_scale = 65536; 1110 unsigned int sclk = port->uartclk * 2; 1111 unsigned int sdiv = DIV_ROUND_CLOSEST(sclk, baud); 1112 unsigned int best_squot; 1113 unsigned int squot; 1114 unsigned int quot; 1115 u16 cpr; 1116 u8 tcr; 1117 int i; 1118 1119 /* Old custom speed handling. */ 1120 if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) { 1121 unsigned int cust_div = port->custom_divisor; 1122 1123 quot = cust_div & UART_DIV_MAX; 1124 tcr = (cust_div >> 16) & OXSEMI_TORNADO_TCR_MASK; 1125 cpr = (cust_div >> 20) & OXSEMI_TORNADO_CPR_MASK; 1126 if (cpr < OXSEMI_TORNADO_CPR_MIN) 1127 cpr = OXSEMI_TORNADO_CPR_DEF; 1128 } else { 1129 best_squot = quot_scale; 1130 for (i = 0; i < ARRAY_SIZE(p); i++) { 1131 unsigned int spre; 1132 unsigned int srem; 1133 u8 cp; 1134 u8 tc; 1135 1136 tc = p[i][0]; 1137 cp = p[i][1]; 1138 spre = tc * cp; 1139 1140 srem = sdiv % spre; 1141 if (srem > spre / 2) 1142 srem = spre - srem; 1143 squot = DIV_ROUND_CLOSEST(srem * quot_scale, spre); 1144 1145 if (srem == 0) { 1146 tcr = tc; 1147 cpr = cp; 1148 quot = sdiv / spre; 1149 break; 1150 } else if (squot < best_squot) { 1151 best_squot = squot; 1152 tcr = tc; 1153 cpr = cp; 1154 quot = DIV_ROUND_CLOSEST(sdiv, spre); 1155 } 1156 } 1157 while (tcr <= (OXSEMI_TORNADO_TCR_MASK + 1) >> 1 && 1158 quot % 2 == 0) { 1159 quot >>= 1; 1160 tcr <<= 1; 1161 } 1162 while (quot > UART_DIV_MAX) { 1163 if (tcr <= (OXSEMI_TORNADO_TCR_MASK + 1) >> 1) { 1164 quot >>= 1; 1165 tcr <<= 1; 1166 } else if (cpr <= OXSEMI_TORNADO_CPR_MASK >> 1) { 1167 quot >>= 1; 1168 cpr <<= 1; 1169 } else { 1170 quot = quot * cpr / OXSEMI_TORNADO_CPR_MASK; 1171 cpr = OXSEMI_TORNADO_CPR_MASK; 1172 } 1173 } 1174 } 1175 1176 *frac = (cpr << 8) | (tcr & OXSEMI_TORNADO_TCR_MASK); 1177 return quot; 1178 } 1179 1180 /* 1181 * Set the oversampling rate in the transmitter clock cycle register (TCR), 1182 * the clock prescaler in the clock prescaler register (CPR and CPR2), and 1183 * the clock divisor in the divisor latch (DLL and DLM). Note that for 1184 * backwards compatibility any write to CPR clears CPR2 and therefore CPR 1185 * has to be written first, followed by CPR2, which occupies the location 1186 * of CKS used with earlier UART designs. 1187 */ 1188 static void pci_oxsemi_tornado_set_divisor(struct uart_port *port, 1189 unsigned int baud, 1190 unsigned int quot, 1191 unsigned int quot_frac) 1192 { 1193 struct uart_8250_port *up = up_to_u8250p(port); 1194 u8 cpr2 = quot_frac >> 16; 1195 u8 cpr = quot_frac >> 8; 1196 u8 tcr = quot_frac; 1197 1198 serial_icr_write(up, UART_TCR, tcr); 1199 serial_icr_write(up, UART_CPR, cpr); 1200 serial_icr_write(up, UART_CKS, cpr2); 1201 serial8250_do_set_divisor(port, baud, quot, 0); 1202 } 1203 1204 /* 1205 * For Tornado devices we force MCR[7] set for the Divide-by-M N/8 baud rate 1206 * generator prescaler (CPR and CPR2). Otherwise no prescaler would be used. 1207 */ 1208 static void pci_oxsemi_tornado_set_mctrl(struct uart_port *port, 1209 unsigned int mctrl) 1210 { 1211 struct uart_8250_port *up = up_to_u8250p(port); 1212 1213 up->mcr |= UART_MCR_CLKSEL; 1214 serial8250_do_set_mctrl(port, mctrl); 1215 } 1216 1217 /* 1218 * We require EFR features for clock programming, so set UPF_FULL_PROBE 1219 * for full probing regardless of CONFIG_SERIAL_8250_16550A_VARIANTS setting. 1220 */ 1221 static int pci_oxsemi_tornado_setup(struct serial_private *priv, 1222 const struct pciserial_board *board, 1223 struct uart_8250_port *up, int idx) 1224 { 1225 struct pci_dev *dev = priv->dev; 1226 1227 if (pci_oxsemi_tornado_p(dev)) { 1228 up->port.flags |= UPF_FULL_PROBE; 1229 up->port.get_divisor = pci_oxsemi_tornado_get_divisor; 1230 up->port.set_divisor = pci_oxsemi_tornado_set_divisor; 1231 up->port.set_mctrl = pci_oxsemi_tornado_set_mctrl; 1232 } 1233 1234 return pci_default_setup(priv, board, up, idx); 1235 } 1236 1237 #define QPCR_TEST_FOR1 0x3F 1238 #define QPCR_TEST_GET1 0x00 1239 #define QPCR_TEST_FOR2 0x40 1240 #define QPCR_TEST_GET2 0x40 1241 #define QPCR_TEST_FOR3 0x80 1242 #define QPCR_TEST_GET3 0x40 1243 #define QPCR_TEST_FOR4 0xC0 1244 #define QPCR_TEST_GET4 0x80 1245 1246 #define QOPR_CLOCK_X1 0x0000 1247 #define QOPR_CLOCK_X2 0x0001 1248 #define QOPR_CLOCK_X4 0x0002 1249 #define QOPR_CLOCK_X8 0x0003 1250 #define QOPR_CLOCK_RATE_MASK 0x0003 1251 1252 /* Quatech devices have their own extra interface features */ 1253 static struct pci_device_id quatech_cards[] = { 1254 { PCI_DEVICE_DATA(QUATECH, QSC100, 1) }, 1255 { PCI_DEVICE_DATA(QUATECH, DSC100, 1) }, 1256 { PCI_DEVICE_DATA(QUATECH, DSC100E, 0) }, 1257 { PCI_DEVICE_DATA(QUATECH, DSC200, 1) }, 1258 { PCI_DEVICE_DATA(QUATECH, DSC200E, 0) }, 1259 { PCI_DEVICE_DATA(QUATECH, ESC100D, 1) }, 1260 { PCI_DEVICE_DATA(QUATECH, ESC100M, 1) }, 1261 { PCI_DEVICE_DATA(QUATECH, QSCP100, 1) }, 1262 { PCI_DEVICE_DATA(QUATECH, DSCP100, 1) }, 1263 { PCI_DEVICE_DATA(QUATECH, QSCP200, 1) }, 1264 { PCI_DEVICE_DATA(QUATECH, DSCP200, 1) }, 1265 { PCI_DEVICE_DATA(QUATECH, ESCLP100, 0) }, 1266 { PCI_DEVICE_DATA(QUATECH, QSCLP100, 0) }, 1267 { PCI_DEVICE_DATA(QUATECH, DSCLP100, 0) }, 1268 { PCI_DEVICE_DATA(QUATECH, SSCLP100, 0) }, 1269 { PCI_DEVICE_DATA(QUATECH, QSCLP200, 0) }, 1270 { PCI_DEVICE_DATA(QUATECH, DSCLP200, 0) }, 1271 { PCI_DEVICE_DATA(QUATECH, SSCLP200, 0) }, 1272 { PCI_DEVICE_DATA(QUATECH, SPPXP_100, 0) }, 1273 { 0, } 1274 }; 1275 1276 static int pci_quatech_rqopr(struct uart_8250_port *port) 1277 { 1278 unsigned long base = port->port.iobase; 1279 u8 LCR, val; 1280 1281 LCR = inb(base + UART_LCR); 1282 outb(0xBF, base + UART_LCR); 1283 val = inb(base + UART_SCR); 1284 outb(LCR, base + UART_LCR); 1285 return val; 1286 } 1287 1288 static void pci_quatech_wqopr(struct uart_8250_port *port, u8 qopr) 1289 { 1290 unsigned long base = port->port.iobase; 1291 u8 LCR; 1292 1293 LCR = inb(base + UART_LCR); 1294 outb(0xBF, base + UART_LCR); 1295 inb(base + UART_SCR); 1296 outb(qopr, base + UART_SCR); 1297 outb(LCR, base + UART_LCR); 1298 } 1299 1300 static int pci_quatech_rqmcr(struct uart_8250_port *port) 1301 { 1302 unsigned long base = port->port.iobase; 1303 u8 LCR, val, qmcr; 1304 1305 LCR = inb(base + UART_LCR); 1306 outb(0xBF, base + UART_LCR); 1307 val = inb(base + UART_SCR); 1308 outb(val | 0x10, base + UART_SCR); 1309 qmcr = inb(base + UART_MCR); 1310 outb(val, base + UART_SCR); 1311 outb(LCR, base + UART_LCR); 1312 1313 return qmcr; 1314 } 1315 1316 static void pci_quatech_wqmcr(struct uart_8250_port *port, u8 qmcr) 1317 { 1318 unsigned long base = port->port.iobase; 1319 u8 LCR, val; 1320 1321 LCR = inb(base + UART_LCR); 1322 outb(0xBF, base + UART_LCR); 1323 val = inb(base + UART_SCR); 1324 outb(val | 0x10, base + UART_SCR); 1325 outb(qmcr, base + UART_MCR); 1326 outb(val, base + UART_SCR); 1327 outb(LCR, base + UART_LCR); 1328 } 1329 1330 static int pci_quatech_has_qmcr(struct uart_8250_port *port) 1331 { 1332 unsigned long base = port->port.iobase; 1333 u8 LCR, val; 1334 1335 LCR = inb(base + UART_LCR); 1336 outb(0xBF, base + UART_LCR); 1337 val = inb(base + UART_SCR); 1338 if (val & 0x20) { 1339 outb(0x80, UART_LCR); 1340 if (!(inb(UART_SCR) & 0x20)) { 1341 outb(LCR, base + UART_LCR); 1342 return 1; 1343 } 1344 } 1345 return 0; 1346 } 1347 1348 static int pci_quatech_test(struct uart_8250_port *port) 1349 { 1350 u8 reg, qopr; 1351 1352 qopr = pci_quatech_rqopr(port); 1353 pci_quatech_wqopr(port, qopr & QPCR_TEST_FOR1); 1354 reg = pci_quatech_rqopr(port) & 0xC0; 1355 if (reg != QPCR_TEST_GET1) 1356 return -EINVAL; 1357 pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR2); 1358 reg = pci_quatech_rqopr(port) & 0xC0; 1359 if (reg != QPCR_TEST_GET2) 1360 return -EINVAL; 1361 pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR3); 1362 reg = pci_quatech_rqopr(port) & 0xC0; 1363 if (reg != QPCR_TEST_GET3) 1364 return -EINVAL; 1365 pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR4); 1366 reg = pci_quatech_rqopr(port) & 0xC0; 1367 if (reg != QPCR_TEST_GET4) 1368 return -EINVAL; 1369 1370 pci_quatech_wqopr(port, qopr); 1371 return 0; 1372 } 1373 1374 static int pci_quatech_clock(struct uart_8250_port *port) 1375 { 1376 u8 qopr, reg, set; 1377 unsigned long clock; 1378 1379 if (pci_quatech_test(port) < 0) 1380 return 1843200; 1381 1382 qopr = pci_quatech_rqopr(port); 1383 1384 pci_quatech_wqopr(port, qopr & ~QOPR_CLOCK_X8); 1385 reg = pci_quatech_rqopr(port); 1386 if (reg & QOPR_CLOCK_X8) { 1387 clock = 1843200; 1388 goto out; 1389 } 1390 pci_quatech_wqopr(port, qopr | QOPR_CLOCK_X8); 1391 reg = pci_quatech_rqopr(port); 1392 if (!(reg & QOPR_CLOCK_X8)) { 1393 clock = 1843200; 1394 goto out; 1395 } 1396 reg &= QOPR_CLOCK_X8; 1397 if (reg == QOPR_CLOCK_X2) { 1398 clock = 3685400; 1399 set = QOPR_CLOCK_X2; 1400 } else if (reg == QOPR_CLOCK_X4) { 1401 clock = 7372800; 1402 set = QOPR_CLOCK_X4; 1403 } else if (reg == QOPR_CLOCK_X8) { 1404 clock = 14745600; 1405 set = QOPR_CLOCK_X8; 1406 } else { 1407 clock = 1843200; 1408 set = QOPR_CLOCK_X1; 1409 } 1410 qopr &= ~QOPR_CLOCK_RATE_MASK; 1411 qopr |= set; 1412 1413 out: 1414 pci_quatech_wqopr(port, qopr); 1415 return clock; 1416 } 1417 1418 static int pci_quatech_rs422(struct uart_8250_port *port) 1419 { 1420 u8 qmcr; 1421 int rs422 = 0; 1422 1423 if (!pci_quatech_has_qmcr(port)) 1424 return 0; 1425 qmcr = pci_quatech_rqmcr(port); 1426 pci_quatech_wqmcr(port, 0xFF); 1427 if (pci_quatech_rqmcr(port)) 1428 rs422 = 1; 1429 pci_quatech_wqmcr(port, qmcr); 1430 return rs422; 1431 } 1432 1433 static int pci_quatech_init(struct pci_dev *dev) 1434 { 1435 const struct pci_device_id *match; 1436 bool amcc = false; 1437 1438 match = pci_match_id(quatech_cards, dev); 1439 if (match) 1440 amcc = match->driver_data; 1441 else 1442 pci_err(dev, "unknown port type '0x%04X'.\n", dev->device); 1443 1444 if (amcc) { 1445 unsigned long base = pci_resource_start(dev, 0); 1446 if (base) { 1447 u32 tmp; 1448 1449 outl(inl(base + 0x38) | 0x00002000, base + 0x38); 1450 tmp = inl(base + 0x3c); 1451 outl(tmp | 0x01000000, base + 0x3c); 1452 outl(tmp & ~0x01000000, base + 0x3c); 1453 } 1454 } 1455 return 0; 1456 } 1457 1458 static int pci_quatech_setup(struct serial_private *priv, 1459 const struct pciserial_board *board, 1460 struct uart_8250_port *port, int idx) 1461 { 1462 /* Needed by pci_quatech calls below */ 1463 port->port.iobase = pci_resource_start(priv->dev, FL_GET_BASE(board->flags)); 1464 /* Set up the clocking */ 1465 port->port.uartclk = pci_quatech_clock(port); 1466 /* For now just warn about RS422 */ 1467 if (pci_quatech_rs422(port)) 1468 pci_warn(priv->dev, "software control of RS422 features not currently supported.\n"); 1469 return pci_default_setup(priv, board, port, idx); 1470 } 1471 1472 static int pci_default_setup(struct serial_private *priv, 1473 const struct pciserial_board *board, 1474 struct uart_8250_port *port, int idx) 1475 { 1476 unsigned int bar, offset = board->first_offset, maxnr; 1477 1478 bar = FL_GET_BASE(board->flags); 1479 if (board->flags & FL_BASE_BARS) 1480 bar += idx; 1481 else 1482 offset += idx * board->uart_offset; 1483 1484 maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >> 1485 (board->reg_shift + 3); 1486 1487 if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) 1488 return 1; 1489 1490 return setup_port(priv, port, bar, offset, board->reg_shift); 1491 } 1492 1493 static int 1494 ce4100_serial_setup(struct serial_private *priv, 1495 const struct pciserial_board *board, 1496 struct uart_8250_port *port, int idx) 1497 { 1498 int ret; 1499 1500 ret = setup_port(priv, port, idx, 0, board->reg_shift); 1501 port->port.iotype = UPIO_MEM32; 1502 port->port.type = PORT_XSCALE; 1503 port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); 1504 port->port.regshift = 2; 1505 1506 return ret; 1507 } 1508 1509 static int 1510 pci_omegapci_setup(struct serial_private *priv, 1511 const struct pciserial_board *board, 1512 struct uart_8250_port *port, int idx) 1513 { 1514 return setup_port(priv, port, 2, idx * 8, 0); 1515 } 1516 1517 static int 1518 pci_brcm_trumanage_setup(struct serial_private *priv, 1519 const struct pciserial_board *board, 1520 struct uart_8250_port *port, int idx) 1521 { 1522 int ret = pci_default_setup(priv, board, port, idx); 1523 1524 port->port.type = PORT_BRCM_TRUMANAGE; 1525 port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); 1526 return ret; 1527 } 1528 1529 /* RTS will control by MCR if this bit is 0 */ 1530 #define FINTEK_RTS_CONTROL_BY_HW BIT(4) 1531 /* only worked with FINTEK_RTS_CONTROL_BY_HW on */ 1532 #define FINTEK_RTS_INVERT BIT(5) 1533 1534 /* We should do proper H/W transceiver setting before change to RS485 mode */ 1535 static int pci_fintek_rs485_config(struct uart_port *port, struct ktermios *termios, 1536 struct serial_rs485 *rs485) 1537 { 1538 struct pci_dev *pci_dev = to_pci_dev(port->dev); 1539 u8 setting; 1540 u8 *index = (u8 *) port->private_data; 1541 1542 pci_read_config_byte(pci_dev, 0x40 + 8 * *index + 7, &setting); 1543 1544 if (rs485->flags & SER_RS485_ENABLED) { 1545 /* Enable RTS H/W control mode */ 1546 setting |= FINTEK_RTS_CONTROL_BY_HW; 1547 1548 if (rs485->flags & SER_RS485_RTS_ON_SEND) { 1549 /* RTS driving high on TX */ 1550 setting &= ~FINTEK_RTS_INVERT; 1551 } else { 1552 /* RTS driving low on TX */ 1553 setting |= FINTEK_RTS_INVERT; 1554 } 1555 } else { 1556 /* Disable RTS H/W control mode */ 1557 setting &= ~(FINTEK_RTS_CONTROL_BY_HW | FINTEK_RTS_INVERT); 1558 } 1559 1560 pci_write_config_byte(pci_dev, 0x40 + 8 * *index + 7, setting); 1561 1562 return 0; 1563 } 1564 1565 static const struct serial_rs485 pci_fintek_rs485_supported = { 1566 .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND, 1567 /* F81504/508/512 does not support RTS delay before or after send */ 1568 }; 1569 1570 static int pci_fintek_setup(struct serial_private *priv, 1571 const struct pciserial_board *board, 1572 struct uart_8250_port *port, int idx) 1573 { 1574 struct pci_dev *pdev = priv->dev; 1575 u8 *data; 1576 u8 config_base; 1577 u16 iobase; 1578 1579 config_base = 0x40 + 0x08 * idx; 1580 1581 /* Get the io address from configuration space */ 1582 pci_read_config_word(pdev, config_base + 4, &iobase); 1583 1584 pci_dbg(pdev, "idx=%d iobase=0x%x", idx, iobase); 1585 1586 port->port.iotype = UPIO_PORT; 1587 port->port.iobase = iobase; 1588 port->port.rs485_config = pci_fintek_rs485_config; 1589 port->port.rs485_supported = pci_fintek_rs485_supported; 1590 1591 data = devm_kzalloc(&pdev->dev, sizeof(u8), GFP_KERNEL); 1592 if (!data) 1593 return -ENOMEM; 1594 1595 /* preserve index in PCI configuration space */ 1596 *data = idx; 1597 port->port.private_data = data; 1598 1599 return 0; 1600 } 1601 1602 static int pci_fintek_init(struct pci_dev *dev) 1603 { 1604 unsigned long iobase; 1605 u32 max_port, i; 1606 resource_size_t bar_data[3]; 1607 u8 config_base; 1608 struct serial_private *priv = pci_get_drvdata(dev); 1609 1610 if (!(pci_resource_flags(dev, 5) & IORESOURCE_IO) || 1611 !(pci_resource_flags(dev, 4) & IORESOURCE_IO) || 1612 !(pci_resource_flags(dev, 3) & IORESOURCE_IO)) 1613 return -ENODEV; 1614 1615 switch (dev->device) { 1616 case 0x1104: /* 4 ports */ 1617 case 0x1108: /* 8 ports */ 1618 max_port = dev->device & 0xff; 1619 break; 1620 case 0x1112: /* 12 ports */ 1621 max_port = 12; 1622 break; 1623 default: 1624 return -EINVAL; 1625 } 1626 1627 /* Get the io address dispatch from the BIOS */ 1628 bar_data[0] = pci_resource_start(dev, 5); 1629 bar_data[1] = pci_resource_start(dev, 4); 1630 bar_data[2] = pci_resource_start(dev, 3); 1631 1632 for (i = 0; i < max_port; ++i) { 1633 /* UART0 configuration offset start from 0x40 */ 1634 config_base = 0x40 + 0x08 * i; 1635 1636 /* Calculate Real IO Port */ 1637 iobase = (bar_data[i / 4] & 0xffffffe0) + (i % 4) * 8; 1638 1639 /* Enable UART I/O port */ 1640 pci_write_config_byte(dev, config_base + 0x00, 0x01); 1641 1642 /* Select 128-byte FIFO and 8x FIFO threshold */ 1643 pci_write_config_byte(dev, config_base + 0x01, 0x33); 1644 1645 /* LSB UART */ 1646 pci_write_config_byte(dev, config_base + 0x04, 1647 (u8)(iobase & 0xff)); 1648 1649 /* MSB UART */ 1650 pci_write_config_byte(dev, config_base + 0x05, 1651 (u8)((iobase & 0xff00) >> 8)); 1652 1653 pci_write_config_byte(dev, config_base + 0x06, dev->irq); 1654 1655 if (!priv) { 1656 /* First init without port data 1657 * force init to RS232 Mode 1658 */ 1659 pci_write_config_byte(dev, config_base + 0x07, 0x01); 1660 } 1661 } 1662 1663 return max_port; 1664 } 1665 1666 static void f815xxa_mem_serial_out(struct uart_port *p, int offset, int value) 1667 { 1668 struct f815xxa_data *data = p->private_data; 1669 unsigned long flags; 1670 1671 spin_lock_irqsave(&data->lock, flags); 1672 writeb(value, p->membase + offset); 1673 readb(p->membase + UART_SCR); /* Dummy read for flush pcie tx queue */ 1674 spin_unlock_irqrestore(&data->lock, flags); 1675 } 1676 1677 static int pci_fintek_f815xxa_setup(struct serial_private *priv, 1678 const struct pciserial_board *board, 1679 struct uart_8250_port *port, int idx) 1680 { 1681 struct pci_dev *pdev = priv->dev; 1682 struct f815xxa_data *data; 1683 1684 data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); 1685 if (!data) 1686 return -ENOMEM; 1687 1688 data->idx = idx; 1689 spin_lock_init(&data->lock); 1690 1691 port->port.private_data = data; 1692 port->port.iotype = UPIO_MEM; 1693 port->port.flags |= UPF_IOREMAP; 1694 port->port.mapbase = pci_resource_start(pdev, 0) + 8 * idx; 1695 port->port.serial_out = f815xxa_mem_serial_out; 1696 1697 return 0; 1698 } 1699 1700 static int pci_fintek_f815xxa_init(struct pci_dev *dev) 1701 { 1702 u32 max_port, i; 1703 int config_base; 1704 1705 if (!(pci_resource_flags(dev, 0) & IORESOURCE_MEM)) 1706 return -ENODEV; 1707 1708 switch (dev->device) { 1709 case 0x1204: /* 4 ports */ 1710 case 0x1208: /* 8 ports */ 1711 max_port = dev->device & 0xff; 1712 break; 1713 case 0x1212: /* 12 ports */ 1714 max_port = 12; 1715 break; 1716 default: 1717 return -EINVAL; 1718 } 1719 1720 /* Set to mmio decode */ 1721 pci_write_config_byte(dev, 0x209, 0x40); 1722 1723 for (i = 0; i < max_port; ++i) { 1724 /* UART0 configuration offset start from 0x2A0 */ 1725 config_base = 0x2A0 + 0x08 * i; 1726 1727 /* Select 128-byte FIFO and 8x FIFO threshold */ 1728 pci_write_config_byte(dev, config_base + 0x01, 0x33); 1729 1730 /* Enable UART I/O port */ 1731 pci_write_config_byte(dev, config_base + 0, 0x01); 1732 } 1733 1734 return max_port; 1735 } 1736 1737 static int skip_tx_en_setup(struct serial_private *priv, 1738 const struct pciserial_board *board, 1739 struct uart_8250_port *port, int idx) 1740 { 1741 port->port.quirks |= UPQ_NO_TXEN_TEST; 1742 pci_dbg(priv->dev, 1743 "serial8250: skipping TxEn test for device [%04x:%04x] subsystem [%04x:%04x]\n", 1744 priv->dev->vendor, priv->dev->device, 1745 priv->dev->subsystem_vendor, priv->dev->subsystem_device); 1746 1747 return pci_default_setup(priv, board, port, idx); 1748 } 1749 1750 static void kt_handle_break(struct uart_port *p) 1751 { 1752 struct uart_8250_port *up = up_to_u8250p(p); 1753 /* 1754 * On receipt of a BI, serial device in Intel ME (Intel 1755 * management engine) needs to have its fifos cleared for sane 1756 * SOL (Serial Over Lan) output. 1757 */ 1758 serial8250_clear_and_reinit_fifos(up); 1759 } 1760 1761 static unsigned int kt_serial_in(struct uart_port *p, int offset) 1762 { 1763 struct uart_8250_port *up = up_to_u8250p(p); 1764 unsigned int val; 1765 1766 /* 1767 * When the Intel ME (management engine) gets reset its serial 1768 * port registers could return 0 momentarily. Functions like 1769 * serial8250_console_write, read and save the IER, perform 1770 * some operation and then restore it. In order to avoid 1771 * setting IER register inadvertently to 0, if the value read 1772 * is 0, double check with ier value in uart_8250_port and use 1773 * that instead. up->ier should be the same value as what is 1774 * currently configured. 1775 */ 1776 val = inb(p->iobase + offset); 1777 if (offset == UART_IER) { 1778 if (val == 0) 1779 val = up->ier; 1780 } 1781 return val; 1782 } 1783 1784 static int kt_serial_setup(struct serial_private *priv, 1785 const struct pciserial_board *board, 1786 struct uart_8250_port *port, int idx) 1787 { 1788 port->port.flags |= UPF_BUG_THRE; 1789 port->port.serial_in = kt_serial_in; 1790 port->port.handle_break = kt_handle_break; 1791 return skip_tx_en_setup(priv, board, port, idx); 1792 } 1793 1794 static int pci_eg20t_init(struct pci_dev *dev) 1795 { 1796 #if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE) 1797 return -ENODEV; 1798 #else 1799 return 0; 1800 #endif 1801 } 1802 1803 static int 1804 pci_wch_ch353_setup(struct serial_private *priv, 1805 const struct pciserial_board *board, 1806 struct uart_8250_port *port, int idx) 1807 { 1808 port->port.flags |= UPF_FIXED_TYPE; 1809 port->port.type = PORT_16550A; 1810 return pci_default_setup(priv, board, port, idx); 1811 } 1812 1813 static int 1814 pci_wch_ch355_setup(struct serial_private *priv, 1815 const struct pciserial_board *board, 1816 struct uart_8250_port *port, int idx) 1817 { 1818 port->port.flags |= UPF_FIXED_TYPE; 1819 port->port.type = PORT_16550A; 1820 return pci_default_setup(priv, board, port, idx); 1821 } 1822 1823 static int 1824 pci_wch_ch38x_setup(struct serial_private *priv, 1825 const struct pciserial_board *board, 1826 struct uart_8250_port *port, int idx) 1827 { 1828 port->port.flags |= UPF_FIXED_TYPE; 1829 port->port.type = PORT_16850; 1830 return pci_default_setup(priv, board, port, idx); 1831 } 1832 1833 1834 #define CH384_XINT_ENABLE_REG 0xEB 1835 #define CH384_XINT_ENABLE_BIT 0x02 1836 1837 static int pci_wch_ch38x_init(struct pci_dev *dev) 1838 { 1839 int max_port; 1840 unsigned long iobase; 1841 1842 1843 switch (dev->device) { 1844 case 0x3853: /* 8 ports */ 1845 max_port = 8; 1846 break; 1847 default: 1848 return -EINVAL; 1849 } 1850 1851 iobase = pci_resource_start(dev, 0); 1852 outb(CH384_XINT_ENABLE_BIT, iobase + CH384_XINT_ENABLE_REG); 1853 1854 return max_port; 1855 } 1856 1857 static void pci_wch_ch38x_exit(struct pci_dev *dev) 1858 { 1859 unsigned long iobase; 1860 1861 iobase = pci_resource_start(dev, 0); 1862 outb(0x0, iobase + CH384_XINT_ENABLE_REG); 1863 } 1864 1865 1866 static int 1867 pci_sunix_setup(struct serial_private *priv, 1868 const struct pciserial_board *board, 1869 struct uart_8250_port *port, int idx) 1870 { 1871 int bar; 1872 int offset; 1873 1874 port->port.flags |= UPF_FIXED_TYPE; 1875 port->port.type = PORT_SUNIX; 1876 1877 if (idx < 4) { 1878 bar = 0; 1879 offset = idx * board->uart_offset; 1880 } else { 1881 bar = 1; 1882 idx -= 4; 1883 idx = div_s64_rem(idx, 4, &offset); 1884 offset = idx * 64 + offset * board->uart_offset; 1885 } 1886 1887 return setup_port(priv, port, bar, offset, 0); 1888 } 1889 1890 static int 1891 pci_moxa_setup(struct serial_private *priv, 1892 const struct pciserial_board *board, 1893 struct uart_8250_port *port, int idx) 1894 { 1895 unsigned int bar = FL_GET_BASE(board->flags); 1896 int offset; 1897 1898 if (board->num_ports == 4 && idx == 3) 1899 offset = 7 * board->uart_offset; 1900 else 1901 offset = idx * board->uart_offset; 1902 1903 return setup_port(priv, port, bar, offset, 0); 1904 } 1905 1906 #define PCI_VENDOR_ID_SBSMODULARIO 0x124B 1907 #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B 1908 #define PCI_DEVICE_ID_OCTPRO 0x0001 1909 #define PCI_SUBDEVICE_ID_OCTPRO232 0x0108 1910 #define PCI_SUBDEVICE_ID_OCTPRO422 0x0208 1911 #define PCI_SUBDEVICE_ID_POCTAL232 0x0308 1912 #define PCI_SUBDEVICE_ID_POCTAL422 0x0408 1913 #define PCI_SUBDEVICE_ID_SIIG_DUAL_00 0x2500 1914 #define PCI_SUBDEVICE_ID_SIIG_DUAL_30 0x2530 1915 #define PCI_VENDOR_ID_ADVANTECH 0x13fe 1916 #define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66 1917 #define PCI_DEVICE_ID_ADVANTECH_PCI1600 0x1600 1918 #define PCI_DEVICE_ID_ADVANTECH_PCI1600_1611 0x1611 1919 #define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620 1920 #define PCI_DEVICE_ID_ADVANTECH_PCI3618 0x3618 1921 #define PCI_DEVICE_ID_ADVANTECH_PCIf618 0xf618 1922 #define PCI_DEVICE_ID_TITAN_200I 0x8028 1923 #define PCI_DEVICE_ID_TITAN_400I 0x8048 1924 #define PCI_DEVICE_ID_TITAN_800I 0x8088 1925 #define PCI_DEVICE_ID_TITAN_800EH 0xA007 1926 #define PCI_DEVICE_ID_TITAN_800EHB 0xA008 1927 #define PCI_DEVICE_ID_TITAN_400EH 0xA009 1928 #define PCI_DEVICE_ID_TITAN_100E 0xA010 1929 #define PCI_DEVICE_ID_TITAN_200E 0xA012 1930 #define PCI_DEVICE_ID_TITAN_400E 0xA013 1931 #define PCI_DEVICE_ID_TITAN_800E 0xA014 1932 #define PCI_DEVICE_ID_TITAN_200EI 0xA016 1933 #define PCI_DEVICE_ID_TITAN_200EISI 0xA017 1934 #define PCI_DEVICE_ID_TITAN_200V3 0xA306 1935 #define PCI_DEVICE_ID_TITAN_400V3 0xA310 1936 #define PCI_DEVICE_ID_TITAN_410V3 0xA312 1937 #define PCI_DEVICE_ID_TITAN_800V3 0xA314 1938 #define PCI_DEVICE_ID_TITAN_800V3B 0xA315 1939 #define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 1940 #define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6 1941 #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 1942 #define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d 1943 #define PCI_VENDOR_ID_WCH 0x4348 1944 #define PCI_DEVICE_ID_WCH_CH352_2S 0x3253 1945 #define PCI_DEVICE_ID_WCH_CH353_4S 0x3453 1946 #define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046 1947 #define PCI_DEVICE_ID_WCH_CH353_1S1P 0x5053 1948 #define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053 1949 #define PCI_DEVICE_ID_WCH_CH355_4S 0x7173 1950 #define PCI_VENDOR_ID_AGESTAR 0x5372 1951 #define PCI_DEVICE_ID_AGESTAR_9375 0x6872 1952 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a 1953 #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e 1954 1955 #define PCIE_VENDOR_ID_WCH 0x1c00 1956 #define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250 1957 #define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470 1958 #define PCIE_DEVICE_ID_WCH_CH384_8S 0x3853 1959 #define PCIE_DEVICE_ID_WCH_CH382_2S 0x3253 1960 1961 #define PCI_DEVICE_ID_MOXA_CP102E 0x1024 1962 #define PCI_DEVICE_ID_MOXA_CP102EL 0x1025 1963 #define PCI_DEVICE_ID_MOXA_CP104EL_A 0x1045 1964 #define PCI_DEVICE_ID_MOXA_CP114EL 0x1144 1965 #define PCI_DEVICE_ID_MOXA_CP116E_A_A 0x1160 1966 #define PCI_DEVICE_ID_MOXA_CP116E_A_B 0x1161 1967 #define PCI_DEVICE_ID_MOXA_CP118EL_A 0x1182 1968 #define PCI_DEVICE_ID_MOXA_CP118E_A_I 0x1183 1969 #define PCI_DEVICE_ID_MOXA_CP132EL 0x1322 1970 #define PCI_DEVICE_ID_MOXA_CP134EL_A 0x1342 1971 #define PCI_DEVICE_ID_MOXA_CP138E_A 0x1381 1972 #define PCI_DEVICE_ID_MOXA_CP168EL_A 0x1683 1973 1974 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ 1975 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 1976 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588 1977 1978 /* 1979 * Master list of serial port init/setup/exit quirks. 1980 * This does not describe the general nature of the port. 1981 * (ie, baud base, number and location of ports, etc) 1982 * 1983 * This list is ordered alphabetically by vendor then device. 1984 * Specific entries must come before more generic entries. 1985 */ 1986 static struct pci_serial_quirk pci_serial_quirks[] = { 1987 /* 1988 * ADDI-DATA GmbH communication cards <info@addi-data.com> 1989 */ 1990 { 1991 .vendor = PCI_VENDOR_ID_AMCC, 1992 .device = PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800, 1993 .subvendor = PCI_ANY_ID, 1994 .subdevice = PCI_ANY_ID, 1995 .setup = addidata_apci7800_setup, 1996 }, 1997 /* 1998 * AFAVLAB cards - these may be called via parport_serial 1999 * It is not clear whether this applies to all products. 2000 */ 2001 { 2002 .vendor = PCI_VENDOR_ID_AFAVLAB, 2003 .device = PCI_ANY_ID, 2004 .subvendor = PCI_ANY_ID, 2005 .subdevice = PCI_ANY_ID, 2006 .setup = afavlab_setup, 2007 }, 2008 /* 2009 * HP Diva 2010 */ 2011 { 2012 .vendor = PCI_VENDOR_ID_HP, 2013 .device = PCI_DEVICE_ID_HP_DIVA, 2014 .subvendor = PCI_ANY_ID, 2015 .subdevice = PCI_ANY_ID, 2016 .init = pci_hp_diva_init, 2017 .setup = pci_hp_diva_setup, 2018 }, 2019 /* 2020 * HPE PCI serial device 2021 */ 2022 { 2023 .vendor = PCI_VENDOR_ID_HP_3PAR, 2024 .device = PCI_DEVICE_ID_HPE_PCI_SERIAL, 2025 .subvendor = PCI_ANY_ID, 2026 .subdevice = PCI_ANY_ID, 2027 .setup = pci_hp_diva_setup, 2028 }, 2029 /* 2030 * Intel 2031 */ 2032 { 2033 .vendor = PCI_VENDOR_ID_INTEL, 2034 .device = PCI_DEVICE_ID_INTEL_80960_RP, 2035 .subvendor = 0xe4bf, 2036 .subdevice = PCI_ANY_ID, 2037 .init = pci_inteli960ni_init, 2038 .setup = pci_default_setup, 2039 }, 2040 { 2041 .vendor = PCI_VENDOR_ID_INTEL, 2042 .device = PCI_DEVICE_ID_INTEL_8257X_SOL, 2043 .subvendor = PCI_ANY_ID, 2044 .subdevice = PCI_ANY_ID, 2045 .setup = skip_tx_en_setup, 2046 }, 2047 { 2048 .vendor = PCI_VENDOR_ID_INTEL, 2049 .device = PCI_DEVICE_ID_INTEL_82573L_SOL, 2050 .subvendor = PCI_ANY_ID, 2051 .subdevice = PCI_ANY_ID, 2052 .setup = skip_tx_en_setup, 2053 }, 2054 { 2055 .vendor = PCI_VENDOR_ID_INTEL, 2056 .device = PCI_DEVICE_ID_INTEL_82573E_SOL, 2057 .subvendor = PCI_ANY_ID, 2058 .subdevice = PCI_ANY_ID, 2059 .setup = skip_tx_en_setup, 2060 }, 2061 { 2062 .vendor = PCI_VENDOR_ID_INTEL, 2063 .device = PCI_DEVICE_ID_INTEL_CE4100_UART, 2064 .subvendor = PCI_ANY_ID, 2065 .subdevice = PCI_ANY_ID, 2066 .setup = ce4100_serial_setup, 2067 }, 2068 { 2069 .vendor = PCI_VENDOR_ID_INTEL, 2070 .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT, 2071 .subvendor = PCI_ANY_ID, 2072 .subdevice = PCI_ANY_ID, 2073 .setup = kt_serial_setup, 2074 }, 2075 /* 2076 * ITE 2077 */ 2078 { 2079 .vendor = PCI_VENDOR_ID_ITE, 2080 .device = PCI_DEVICE_ID_ITE_8872, 2081 .subvendor = PCI_ANY_ID, 2082 .subdevice = PCI_ANY_ID, 2083 .init = pci_ite887x_init, 2084 .setup = pci_default_setup, 2085 .exit = pci_ite887x_exit, 2086 }, 2087 /* 2088 * National Instruments 2089 */ 2090 { 2091 .vendor = PCI_VENDOR_ID_NI, 2092 .device = PCI_DEVICE_ID_NI_PCI23216, 2093 .subvendor = PCI_ANY_ID, 2094 .subdevice = PCI_ANY_ID, 2095 .init = pci_ni8420_init, 2096 .setup = pci_default_setup, 2097 .exit = pci_ni8420_exit, 2098 }, 2099 { 2100 .vendor = PCI_VENDOR_ID_NI, 2101 .device = PCI_DEVICE_ID_NI_PCI2328, 2102 .subvendor = PCI_ANY_ID, 2103 .subdevice = PCI_ANY_ID, 2104 .init = pci_ni8420_init, 2105 .setup = pci_default_setup, 2106 .exit = pci_ni8420_exit, 2107 }, 2108 { 2109 .vendor = PCI_VENDOR_ID_NI, 2110 .device = PCI_DEVICE_ID_NI_PCI2324, 2111 .subvendor = PCI_ANY_ID, 2112 .subdevice = PCI_ANY_ID, 2113 .init = pci_ni8420_init, 2114 .setup = pci_default_setup, 2115 .exit = pci_ni8420_exit, 2116 }, 2117 { 2118 .vendor = PCI_VENDOR_ID_NI, 2119 .device = PCI_DEVICE_ID_NI_PCI2322, 2120 .subvendor = PCI_ANY_ID, 2121 .subdevice = PCI_ANY_ID, 2122 .init = pci_ni8420_init, 2123 .setup = pci_default_setup, 2124 .exit = pci_ni8420_exit, 2125 }, 2126 { 2127 .vendor = PCI_VENDOR_ID_NI, 2128 .device = PCI_DEVICE_ID_NI_PCI2324I, 2129 .subvendor = PCI_ANY_ID, 2130 .subdevice = PCI_ANY_ID, 2131 .init = pci_ni8420_init, 2132 .setup = pci_default_setup, 2133 .exit = pci_ni8420_exit, 2134 }, 2135 { 2136 .vendor = PCI_VENDOR_ID_NI, 2137 .device = PCI_DEVICE_ID_NI_PCI2322I, 2138 .subvendor = PCI_ANY_ID, 2139 .subdevice = PCI_ANY_ID, 2140 .init = pci_ni8420_init, 2141 .setup = pci_default_setup, 2142 .exit = pci_ni8420_exit, 2143 }, 2144 { 2145 .vendor = PCI_VENDOR_ID_NI, 2146 .device = PCI_DEVICE_ID_NI_PXI8420_23216, 2147 .subvendor = PCI_ANY_ID, 2148 .subdevice = PCI_ANY_ID, 2149 .init = pci_ni8420_init, 2150 .setup = pci_default_setup, 2151 .exit = pci_ni8420_exit, 2152 }, 2153 { 2154 .vendor = PCI_VENDOR_ID_NI, 2155 .device = PCI_DEVICE_ID_NI_PXI8420_2328, 2156 .subvendor = PCI_ANY_ID, 2157 .subdevice = PCI_ANY_ID, 2158 .init = pci_ni8420_init, 2159 .setup = pci_default_setup, 2160 .exit = pci_ni8420_exit, 2161 }, 2162 { 2163 .vendor = PCI_VENDOR_ID_NI, 2164 .device = PCI_DEVICE_ID_NI_PXI8420_2324, 2165 .subvendor = PCI_ANY_ID, 2166 .subdevice = PCI_ANY_ID, 2167 .init = pci_ni8420_init, 2168 .setup = pci_default_setup, 2169 .exit = pci_ni8420_exit, 2170 }, 2171 { 2172 .vendor = PCI_VENDOR_ID_NI, 2173 .device = PCI_DEVICE_ID_NI_PXI8420_2322, 2174 .subvendor = PCI_ANY_ID, 2175 .subdevice = PCI_ANY_ID, 2176 .init = pci_ni8420_init, 2177 .setup = pci_default_setup, 2178 .exit = pci_ni8420_exit, 2179 }, 2180 { 2181 .vendor = PCI_VENDOR_ID_NI, 2182 .device = PCI_DEVICE_ID_NI_PXI8422_2324, 2183 .subvendor = PCI_ANY_ID, 2184 .subdevice = PCI_ANY_ID, 2185 .init = pci_ni8420_init, 2186 .setup = pci_default_setup, 2187 .exit = pci_ni8420_exit, 2188 }, 2189 { 2190 .vendor = PCI_VENDOR_ID_NI, 2191 .device = PCI_DEVICE_ID_NI_PXI8422_2322, 2192 .subvendor = PCI_ANY_ID, 2193 .subdevice = PCI_ANY_ID, 2194 .init = pci_ni8420_init, 2195 .setup = pci_default_setup, 2196 .exit = pci_ni8420_exit, 2197 }, 2198 { 2199 .vendor = PCI_VENDOR_ID_NI, 2200 .device = PCI_ANY_ID, 2201 .subvendor = PCI_ANY_ID, 2202 .subdevice = PCI_ANY_ID, 2203 .init = pci_ni8430_init, 2204 .setup = pci_ni8430_setup, 2205 .exit = pci_ni8430_exit, 2206 }, 2207 /* Quatech */ 2208 { 2209 .vendor = PCI_VENDOR_ID_QUATECH, 2210 .device = PCI_ANY_ID, 2211 .subvendor = PCI_ANY_ID, 2212 .subdevice = PCI_ANY_ID, 2213 .init = pci_quatech_init, 2214 .setup = pci_quatech_setup, 2215 }, 2216 /* 2217 * Panacom 2218 */ 2219 { 2220 .vendor = PCI_VENDOR_ID_PANACOM, 2221 .device = PCI_DEVICE_ID_PANACOM_QUADMODEM, 2222 .subvendor = PCI_ANY_ID, 2223 .subdevice = PCI_ANY_ID, 2224 .init = pci_plx9050_init, 2225 .setup = pci_default_setup, 2226 .exit = pci_plx9050_exit, 2227 }, 2228 { 2229 .vendor = PCI_VENDOR_ID_PANACOM, 2230 .device = PCI_DEVICE_ID_PANACOM_DUALMODEM, 2231 .subvendor = PCI_ANY_ID, 2232 .subdevice = PCI_ANY_ID, 2233 .init = pci_plx9050_init, 2234 .setup = pci_default_setup, 2235 .exit = pci_plx9050_exit, 2236 }, 2237 /* 2238 * PLX 2239 */ 2240 { 2241 .vendor = PCI_VENDOR_ID_PLX, 2242 .device = PCI_DEVICE_ID_PLX_9050, 2243 .subvendor = PCI_SUBVENDOR_ID_EXSYS, 2244 .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055, 2245 .init = pci_plx9050_init, 2246 .setup = pci_default_setup, 2247 .exit = pci_plx9050_exit, 2248 }, 2249 { 2250 .vendor = PCI_VENDOR_ID_PLX, 2251 .device = PCI_DEVICE_ID_PLX_9050, 2252 .subvendor = PCI_SUBVENDOR_ID_KEYSPAN, 2253 .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2, 2254 .init = pci_plx9050_init, 2255 .setup = pci_default_setup, 2256 .exit = pci_plx9050_exit, 2257 }, 2258 { 2259 .vendor = PCI_VENDOR_ID_PLX, 2260 .device = PCI_DEVICE_ID_PLX_ROMULUS, 2261 .subvendor = PCI_VENDOR_ID_PLX, 2262 .subdevice = PCI_DEVICE_ID_PLX_ROMULUS, 2263 .init = pci_plx9050_init, 2264 .setup = pci_default_setup, 2265 .exit = pci_plx9050_exit, 2266 }, 2267 /* 2268 * SBS Technologies, Inc., PMC-OCTALPRO 232 2269 */ 2270 { 2271 .vendor = PCI_VENDOR_ID_SBSMODULARIO, 2272 .device = PCI_DEVICE_ID_OCTPRO, 2273 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, 2274 .subdevice = PCI_SUBDEVICE_ID_OCTPRO232, 2275 .init = sbs_init, 2276 .setup = sbs_setup, 2277 .exit = sbs_exit, 2278 }, 2279 /* 2280 * SBS Technologies, Inc., PMC-OCTALPRO 422 2281 */ 2282 { 2283 .vendor = PCI_VENDOR_ID_SBSMODULARIO, 2284 .device = PCI_DEVICE_ID_OCTPRO, 2285 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, 2286 .subdevice = PCI_SUBDEVICE_ID_OCTPRO422, 2287 .init = sbs_init, 2288 .setup = sbs_setup, 2289 .exit = sbs_exit, 2290 }, 2291 /* 2292 * SBS Technologies, Inc., P-Octal 232 2293 */ 2294 { 2295 .vendor = PCI_VENDOR_ID_SBSMODULARIO, 2296 .device = PCI_DEVICE_ID_OCTPRO, 2297 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, 2298 .subdevice = PCI_SUBDEVICE_ID_POCTAL232, 2299 .init = sbs_init, 2300 .setup = sbs_setup, 2301 .exit = sbs_exit, 2302 }, 2303 /* 2304 * SBS Technologies, Inc., P-Octal 422 2305 */ 2306 { 2307 .vendor = PCI_VENDOR_ID_SBSMODULARIO, 2308 .device = PCI_DEVICE_ID_OCTPRO, 2309 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, 2310 .subdevice = PCI_SUBDEVICE_ID_POCTAL422, 2311 .init = sbs_init, 2312 .setup = sbs_setup, 2313 .exit = sbs_exit, 2314 }, 2315 /* 2316 * SIIG cards - these may be called via parport_serial 2317 */ 2318 { 2319 .vendor = PCI_VENDOR_ID_SIIG, 2320 .device = PCI_ANY_ID, 2321 .subvendor = PCI_ANY_ID, 2322 .subdevice = PCI_ANY_ID, 2323 .init = pci_siig_init, 2324 .setup = pci_siig_setup, 2325 }, 2326 /* 2327 * Titan cards 2328 */ 2329 { 2330 .vendor = PCI_VENDOR_ID_TITAN, 2331 .device = PCI_DEVICE_ID_TITAN_400L, 2332 .subvendor = PCI_ANY_ID, 2333 .subdevice = PCI_ANY_ID, 2334 .setup = titan_400l_800l_setup, 2335 }, 2336 { 2337 .vendor = PCI_VENDOR_ID_TITAN, 2338 .device = PCI_DEVICE_ID_TITAN_800L, 2339 .subvendor = PCI_ANY_ID, 2340 .subdevice = PCI_ANY_ID, 2341 .setup = titan_400l_800l_setup, 2342 }, 2343 /* 2344 * Timedia cards 2345 */ 2346 { 2347 .vendor = PCI_VENDOR_ID_TIMEDIA, 2348 .device = PCI_DEVICE_ID_TIMEDIA_1889, 2349 .subvendor = PCI_VENDOR_ID_TIMEDIA, 2350 .subdevice = PCI_ANY_ID, 2351 .probe = pci_timedia_probe, 2352 .init = pci_timedia_init, 2353 .setup = pci_timedia_setup, 2354 }, 2355 { 2356 .vendor = PCI_VENDOR_ID_TIMEDIA, 2357 .device = PCI_ANY_ID, 2358 .subvendor = PCI_ANY_ID, 2359 .subdevice = PCI_ANY_ID, 2360 .setup = pci_timedia_setup, 2361 }, 2362 /* 2363 * Sunix PCI serial boards 2364 */ 2365 { 2366 .vendor = PCI_VENDOR_ID_SUNIX, 2367 .device = PCI_DEVICE_ID_SUNIX_1999, 2368 .subvendor = PCI_VENDOR_ID_SUNIX, 2369 .subdevice = PCI_ANY_ID, 2370 .setup = pci_sunix_setup, 2371 }, 2372 /* 2373 * Xircom cards 2374 */ 2375 { 2376 .vendor = PCI_VENDOR_ID_XIRCOM, 2377 .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM, 2378 .subvendor = PCI_ANY_ID, 2379 .subdevice = PCI_ANY_ID, 2380 .init = pci_xircom_init, 2381 .setup = pci_default_setup, 2382 }, 2383 /* 2384 * Netmos cards - these may be called via parport_serial 2385 */ 2386 { 2387 .vendor = PCI_VENDOR_ID_NETMOS, 2388 .device = PCI_ANY_ID, 2389 .subvendor = PCI_ANY_ID, 2390 .subdevice = PCI_ANY_ID, 2391 .init = pci_netmos_init, 2392 .setup = pci_netmos_9900_setup, 2393 }, 2394 /* 2395 * EndRun Technologies 2396 */ 2397 { 2398 .vendor = PCI_VENDOR_ID_ENDRUN, 2399 .device = PCI_ANY_ID, 2400 .subvendor = PCI_ANY_ID, 2401 .subdevice = PCI_ANY_ID, 2402 .init = pci_oxsemi_tornado_init, 2403 .setup = pci_default_setup, 2404 }, 2405 /* 2406 * For Oxford Semiconductor Tornado based devices 2407 */ 2408 { 2409 .vendor = PCI_VENDOR_ID_OXSEMI, 2410 .device = PCI_ANY_ID, 2411 .subvendor = PCI_ANY_ID, 2412 .subdevice = PCI_ANY_ID, 2413 .init = pci_oxsemi_tornado_init, 2414 .setup = pci_oxsemi_tornado_setup, 2415 }, 2416 { 2417 .vendor = PCI_VENDOR_ID_MAINPINE, 2418 .device = PCI_ANY_ID, 2419 .subvendor = PCI_ANY_ID, 2420 .subdevice = PCI_ANY_ID, 2421 .init = pci_oxsemi_tornado_init, 2422 .setup = pci_oxsemi_tornado_setup, 2423 }, 2424 { 2425 .vendor = PCI_VENDOR_ID_DIGI, 2426 .device = PCIE_DEVICE_ID_NEO_2_OX_IBM, 2427 .subvendor = PCI_SUBVENDOR_ID_IBM, 2428 .subdevice = PCI_ANY_ID, 2429 .init = pci_oxsemi_tornado_init, 2430 .setup = pci_oxsemi_tornado_setup, 2431 }, 2432 /* 2433 * Brainboxes devices - all Oxsemi based 2434 */ 2435 { 2436 .vendor = PCI_VENDOR_ID_INTASHIELD, 2437 .device = 0x4027, 2438 .subvendor = PCI_ANY_ID, 2439 .subdevice = PCI_ANY_ID, 2440 .init = pci_oxsemi_tornado_init, 2441 .setup = pci_oxsemi_tornado_setup, 2442 }, 2443 { 2444 .vendor = PCI_VENDOR_ID_INTASHIELD, 2445 .device = 0x4028, 2446 .subvendor = PCI_ANY_ID, 2447 .subdevice = PCI_ANY_ID, 2448 .init = pci_oxsemi_tornado_init, 2449 .setup = pci_oxsemi_tornado_setup, 2450 }, 2451 { 2452 .vendor = PCI_VENDOR_ID_INTASHIELD, 2453 .device = 0x4029, 2454 .subvendor = PCI_ANY_ID, 2455 .subdevice = PCI_ANY_ID, 2456 .init = pci_oxsemi_tornado_init, 2457 .setup = pci_oxsemi_tornado_setup, 2458 }, 2459 { 2460 .vendor = PCI_VENDOR_ID_INTASHIELD, 2461 .device = 0x4019, 2462 .subvendor = PCI_ANY_ID, 2463 .subdevice = PCI_ANY_ID, 2464 .init = pci_oxsemi_tornado_init, 2465 .setup = pci_oxsemi_tornado_setup, 2466 }, 2467 { 2468 .vendor = PCI_VENDOR_ID_INTASHIELD, 2469 .device = 0x4016, 2470 .subvendor = PCI_ANY_ID, 2471 .subdevice = PCI_ANY_ID, 2472 .init = pci_oxsemi_tornado_init, 2473 .setup = pci_oxsemi_tornado_setup, 2474 }, 2475 { 2476 .vendor = PCI_VENDOR_ID_INTASHIELD, 2477 .device = 0x4015, 2478 .subvendor = PCI_ANY_ID, 2479 .subdevice = PCI_ANY_ID, 2480 .init = pci_oxsemi_tornado_init, 2481 .setup = pci_oxsemi_tornado_setup, 2482 }, 2483 { 2484 .vendor = PCI_VENDOR_ID_INTASHIELD, 2485 .device = 0x400A, 2486 .subvendor = PCI_ANY_ID, 2487 .subdevice = PCI_ANY_ID, 2488 .init = pci_oxsemi_tornado_init, 2489 .setup = pci_oxsemi_tornado_setup, 2490 }, 2491 { 2492 .vendor = PCI_VENDOR_ID_INTASHIELD, 2493 .device = 0x400E, 2494 .subvendor = PCI_ANY_ID, 2495 .subdevice = PCI_ANY_ID, 2496 .init = pci_oxsemi_tornado_init, 2497 .setup = pci_oxsemi_tornado_setup, 2498 }, 2499 { 2500 .vendor = PCI_VENDOR_ID_INTASHIELD, 2501 .device = 0x400C, 2502 .subvendor = PCI_ANY_ID, 2503 .subdevice = PCI_ANY_ID, 2504 .init = pci_oxsemi_tornado_init, 2505 .setup = pci_oxsemi_tornado_setup, 2506 }, 2507 { 2508 .vendor = PCI_VENDOR_ID_INTASHIELD, 2509 .device = 0x400B, 2510 .subvendor = PCI_ANY_ID, 2511 .subdevice = PCI_ANY_ID, 2512 .init = pci_oxsemi_tornado_init, 2513 .setup = pci_oxsemi_tornado_setup, 2514 }, 2515 { 2516 .vendor = PCI_VENDOR_ID_INTASHIELD, 2517 .device = 0x400F, 2518 .subvendor = PCI_ANY_ID, 2519 .subdevice = PCI_ANY_ID, 2520 .init = pci_oxsemi_tornado_init, 2521 .setup = pci_oxsemi_tornado_setup, 2522 }, 2523 { 2524 .vendor = PCI_VENDOR_ID_INTASHIELD, 2525 .device = 0x4010, 2526 .subvendor = PCI_ANY_ID, 2527 .subdevice = PCI_ANY_ID, 2528 .init = pci_oxsemi_tornado_init, 2529 .setup = pci_oxsemi_tornado_setup, 2530 }, 2531 { 2532 .vendor = PCI_VENDOR_ID_INTASHIELD, 2533 .device = 0x4011, 2534 .subvendor = PCI_ANY_ID, 2535 .subdevice = PCI_ANY_ID, 2536 .init = pci_oxsemi_tornado_init, 2537 .setup = pci_oxsemi_tornado_setup, 2538 }, 2539 { 2540 .vendor = PCI_VENDOR_ID_INTASHIELD, 2541 .device = 0x401D, 2542 .subvendor = PCI_ANY_ID, 2543 .subdevice = PCI_ANY_ID, 2544 .init = pci_oxsemi_tornado_init, 2545 .setup = pci_oxsemi_tornado_setup, 2546 }, 2547 { 2548 .vendor = PCI_VENDOR_ID_INTASHIELD, 2549 .device = 0x401E, 2550 .subvendor = PCI_ANY_ID, 2551 .subdevice = PCI_ANY_ID, 2552 .init = pci_oxsemi_tornado_init, 2553 .setup = pci_oxsemi_tornado_setup, 2554 }, 2555 { 2556 .vendor = PCI_VENDOR_ID_INTASHIELD, 2557 .device = 0x4013, 2558 .subvendor = PCI_ANY_ID, 2559 .subdevice = PCI_ANY_ID, 2560 .init = pci_oxsemi_tornado_init, 2561 .setup = pci_oxsemi_tornado_setup, 2562 }, 2563 { 2564 .vendor = PCI_VENDOR_ID_INTASHIELD, 2565 .device = 0x4017, 2566 .subvendor = PCI_ANY_ID, 2567 .subdevice = PCI_ANY_ID, 2568 .init = pci_oxsemi_tornado_init, 2569 .setup = pci_oxsemi_tornado_setup, 2570 }, 2571 { 2572 .vendor = PCI_VENDOR_ID_INTASHIELD, 2573 .device = 0x4018, 2574 .subvendor = PCI_ANY_ID, 2575 .subdevice = PCI_ANY_ID, 2576 .init = pci_oxsemi_tornado_init, 2577 .setup = pci_oxsemi_tornado_setup, 2578 }, 2579 { 2580 .vendor = PCI_VENDOR_ID_INTEL, 2581 .device = 0x8811, 2582 .subvendor = PCI_ANY_ID, 2583 .subdevice = PCI_ANY_ID, 2584 .init = pci_eg20t_init, 2585 .setup = pci_default_setup, 2586 }, 2587 { 2588 .vendor = PCI_VENDOR_ID_INTEL, 2589 .device = 0x8812, 2590 .subvendor = PCI_ANY_ID, 2591 .subdevice = PCI_ANY_ID, 2592 .init = pci_eg20t_init, 2593 .setup = pci_default_setup, 2594 }, 2595 { 2596 .vendor = PCI_VENDOR_ID_INTEL, 2597 .device = 0x8813, 2598 .subvendor = PCI_ANY_ID, 2599 .subdevice = PCI_ANY_ID, 2600 .init = pci_eg20t_init, 2601 .setup = pci_default_setup, 2602 }, 2603 { 2604 .vendor = PCI_VENDOR_ID_INTEL, 2605 .device = 0x8814, 2606 .subvendor = PCI_ANY_ID, 2607 .subdevice = PCI_ANY_ID, 2608 .init = pci_eg20t_init, 2609 .setup = pci_default_setup, 2610 }, 2611 { 2612 .vendor = 0x10DB, 2613 .device = 0x8027, 2614 .subvendor = PCI_ANY_ID, 2615 .subdevice = PCI_ANY_ID, 2616 .init = pci_eg20t_init, 2617 .setup = pci_default_setup, 2618 }, 2619 { 2620 .vendor = 0x10DB, 2621 .device = 0x8028, 2622 .subvendor = PCI_ANY_ID, 2623 .subdevice = PCI_ANY_ID, 2624 .init = pci_eg20t_init, 2625 .setup = pci_default_setup, 2626 }, 2627 { 2628 .vendor = 0x10DB, 2629 .device = 0x8029, 2630 .subvendor = PCI_ANY_ID, 2631 .subdevice = PCI_ANY_ID, 2632 .init = pci_eg20t_init, 2633 .setup = pci_default_setup, 2634 }, 2635 { 2636 .vendor = 0x10DB, 2637 .device = 0x800C, 2638 .subvendor = PCI_ANY_ID, 2639 .subdevice = PCI_ANY_ID, 2640 .init = pci_eg20t_init, 2641 .setup = pci_default_setup, 2642 }, 2643 { 2644 .vendor = 0x10DB, 2645 .device = 0x800D, 2646 .subvendor = PCI_ANY_ID, 2647 .subdevice = PCI_ANY_ID, 2648 .init = pci_eg20t_init, 2649 .setup = pci_default_setup, 2650 }, 2651 /* 2652 * Cronyx Omega PCI (PLX-chip based) 2653 */ 2654 { 2655 .vendor = PCI_VENDOR_ID_PLX, 2656 .device = PCI_DEVICE_ID_PLX_CRONYX_OMEGA, 2657 .subvendor = PCI_ANY_ID, 2658 .subdevice = PCI_ANY_ID, 2659 .setup = pci_omegapci_setup, 2660 }, 2661 /* WCH CH353 1S1P card (16550 clone) */ 2662 { 2663 .vendor = PCI_VENDOR_ID_WCH, 2664 .device = PCI_DEVICE_ID_WCH_CH353_1S1P, 2665 .subvendor = PCI_ANY_ID, 2666 .subdevice = PCI_ANY_ID, 2667 .setup = pci_wch_ch353_setup, 2668 }, 2669 /* WCH CH353 2S1P card (16550 clone) */ 2670 { 2671 .vendor = PCI_VENDOR_ID_WCH, 2672 .device = PCI_DEVICE_ID_WCH_CH353_2S1P, 2673 .subvendor = PCI_ANY_ID, 2674 .subdevice = PCI_ANY_ID, 2675 .setup = pci_wch_ch353_setup, 2676 }, 2677 /* WCH CH353 4S card (16550 clone) */ 2678 { 2679 .vendor = PCI_VENDOR_ID_WCH, 2680 .device = PCI_DEVICE_ID_WCH_CH353_4S, 2681 .subvendor = PCI_ANY_ID, 2682 .subdevice = PCI_ANY_ID, 2683 .setup = pci_wch_ch353_setup, 2684 }, 2685 /* WCH CH353 2S1PF card (16550 clone) */ 2686 { 2687 .vendor = PCI_VENDOR_ID_WCH, 2688 .device = PCI_DEVICE_ID_WCH_CH353_2S1PF, 2689 .subvendor = PCI_ANY_ID, 2690 .subdevice = PCI_ANY_ID, 2691 .setup = pci_wch_ch353_setup, 2692 }, 2693 /* WCH CH352 2S card (16550 clone) */ 2694 { 2695 .vendor = PCI_VENDOR_ID_WCH, 2696 .device = PCI_DEVICE_ID_WCH_CH352_2S, 2697 .subvendor = PCI_ANY_ID, 2698 .subdevice = PCI_ANY_ID, 2699 .setup = pci_wch_ch353_setup, 2700 }, 2701 /* WCH CH355 4S card (16550 clone) */ 2702 { 2703 .vendor = PCI_VENDOR_ID_WCH, 2704 .device = PCI_DEVICE_ID_WCH_CH355_4S, 2705 .subvendor = PCI_ANY_ID, 2706 .subdevice = PCI_ANY_ID, 2707 .setup = pci_wch_ch355_setup, 2708 }, 2709 /* WCH CH382 2S card (16850 clone) */ 2710 { 2711 .vendor = PCIE_VENDOR_ID_WCH, 2712 .device = PCIE_DEVICE_ID_WCH_CH382_2S, 2713 .subvendor = PCI_ANY_ID, 2714 .subdevice = PCI_ANY_ID, 2715 .setup = pci_wch_ch38x_setup, 2716 }, 2717 /* WCH CH382 2S1P card (16850 clone) */ 2718 { 2719 .vendor = PCIE_VENDOR_ID_WCH, 2720 .device = PCIE_DEVICE_ID_WCH_CH382_2S1P, 2721 .subvendor = PCI_ANY_ID, 2722 .subdevice = PCI_ANY_ID, 2723 .setup = pci_wch_ch38x_setup, 2724 }, 2725 /* WCH CH384 4S card (16850 clone) */ 2726 { 2727 .vendor = PCIE_VENDOR_ID_WCH, 2728 .device = PCIE_DEVICE_ID_WCH_CH384_4S, 2729 .subvendor = PCI_ANY_ID, 2730 .subdevice = PCI_ANY_ID, 2731 .setup = pci_wch_ch38x_setup, 2732 }, 2733 /* WCH CH384 8S card (16850 clone) */ 2734 { 2735 .vendor = PCIE_VENDOR_ID_WCH, 2736 .device = PCIE_DEVICE_ID_WCH_CH384_8S, 2737 .subvendor = PCI_ANY_ID, 2738 .subdevice = PCI_ANY_ID, 2739 .init = pci_wch_ch38x_init, 2740 .exit = pci_wch_ch38x_exit, 2741 .setup = pci_wch_ch38x_setup, 2742 }, 2743 /* 2744 * Broadcom TruManage (NetXtreme) 2745 */ 2746 { 2747 .vendor = PCI_VENDOR_ID_BROADCOM, 2748 .device = PCI_DEVICE_ID_BROADCOM_TRUMANAGE, 2749 .subvendor = PCI_ANY_ID, 2750 .subdevice = PCI_ANY_ID, 2751 .setup = pci_brcm_trumanage_setup, 2752 }, 2753 { 2754 .vendor = 0x1c29, 2755 .device = 0x1104, 2756 .subvendor = PCI_ANY_ID, 2757 .subdevice = PCI_ANY_ID, 2758 .setup = pci_fintek_setup, 2759 .init = pci_fintek_init, 2760 }, 2761 { 2762 .vendor = 0x1c29, 2763 .device = 0x1108, 2764 .subvendor = PCI_ANY_ID, 2765 .subdevice = PCI_ANY_ID, 2766 .setup = pci_fintek_setup, 2767 .init = pci_fintek_init, 2768 }, 2769 { 2770 .vendor = 0x1c29, 2771 .device = 0x1112, 2772 .subvendor = PCI_ANY_ID, 2773 .subdevice = PCI_ANY_ID, 2774 .setup = pci_fintek_setup, 2775 .init = pci_fintek_init, 2776 }, 2777 /* 2778 * MOXA 2779 */ 2780 { 2781 .vendor = PCI_VENDOR_ID_MOXA, 2782 .device = PCI_ANY_ID, 2783 .subvendor = PCI_ANY_ID, 2784 .subdevice = PCI_ANY_ID, 2785 .setup = pci_moxa_setup, 2786 }, 2787 { 2788 .vendor = 0x1c29, 2789 .device = 0x1204, 2790 .subvendor = PCI_ANY_ID, 2791 .subdevice = PCI_ANY_ID, 2792 .setup = pci_fintek_f815xxa_setup, 2793 .init = pci_fintek_f815xxa_init, 2794 }, 2795 { 2796 .vendor = 0x1c29, 2797 .device = 0x1208, 2798 .subvendor = PCI_ANY_ID, 2799 .subdevice = PCI_ANY_ID, 2800 .setup = pci_fintek_f815xxa_setup, 2801 .init = pci_fintek_f815xxa_init, 2802 }, 2803 { 2804 .vendor = 0x1c29, 2805 .device = 0x1212, 2806 .subvendor = PCI_ANY_ID, 2807 .subdevice = PCI_ANY_ID, 2808 .setup = pci_fintek_f815xxa_setup, 2809 .init = pci_fintek_f815xxa_init, 2810 }, 2811 2812 /* 2813 * Default "match everything" terminator entry 2814 */ 2815 { 2816 .vendor = PCI_ANY_ID, 2817 .device = PCI_ANY_ID, 2818 .subvendor = PCI_ANY_ID, 2819 .subdevice = PCI_ANY_ID, 2820 .setup = pci_default_setup, 2821 } 2822 }; 2823 2824 static inline int quirk_id_matches(u32 quirk_id, u32 dev_id) 2825 { 2826 return quirk_id == PCI_ANY_ID || quirk_id == dev_id; 2827 } 2828 2829 static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) 2830 { 2831 struct pci_serial_quirk *quirk; 2832 2833 for (quirk = pci_serial_quirks; ; quirk++) 2834 if (quirk_id_matches(quirk->vendor, dev->vendor) && 2835 quirk_id_matches(quirk->device, dev->device) && 2836 quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) && 2837 quirk_id_matches(quirk->subdevice, dev->subsystem_device)) 2838 break; 2839 return quirk; 2840 } 2841 2842 /* 2843 * This is the configuration table for all of the PCI serial boards 2844 * which we support. It is directly indexed by the pci_board_num_t enum 2845 * value, which is encoded in the pci_device_id PCI probe table's 2846 * driver_data member. 2847 * 2848 * The makeup of these names are: 2849 * pbn_bn{_bt}_n_baud{_offsetinhex} 2850 * 2851 * bn = PCI BAR number 2852 * bt = Index using PCI BARs 2853 * n = number of serial ports 2854 * baud = baud rate 2855 * offsetinhex = offset for each sequential port (in hex) 2856 * 2857 * This table is sorted by (in order): bn, bt, baud, offsetindex, n. 2858 * 2859 * Please note: in theory if n = 1, _bt infix should make no difference. 2860 * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200 2861 */ 2862 enum pci_board_num_t { 2863 pbn_default = 0, 2864 2865 pbn_b0_1_115200, 2866 pbn_b0_2_115200, 2867 pbn_b0_4_115200, 2868 pbn_b0_5_115200, 2869 pbn_b0_8_115200, 2870 2871 pbn_b0_1_921600, 2872 pbn_b0_2_921600, 2873 pbn_b0_4_921600, 2874 2875 pbn_b0_2_1130000, 2876 2877 pbn_b0_4_1152000, 2878 2879 pbn_b0_4_1250000, 2880 2881 pbn_b0_2_1843200, 2882 pbn_b0_4_1843200, 2883 2884 pbn_b0_1_15625000, 2885 2886 pbn_b0_bt_1_115200, 2887 pbn_b0_bt_2_115200, 2888 pbn_b0_bt_4_115200, 2889 pbn_b0_bt_8_115200, 2890 2891 pbn_b0_bt_1_460800, 2892 pbn_b0_bt_2_460800, 2893 pbn_b0_bt_4_460800, 2894 2895 pbn_b0_bt_1_921600, 2896 pbn_b0_bt_2_921600, 2897 pbn_b0_bt_4_921600, 2898 pbn_b0_bt_8_921600, 2899 2900 pbn_b1_1_115200, 2901 pbn_b1_2_115200, 2902 pbn_b1_4_115200, 2903 pbn_b1_8_115200, 2904 pbn_b1_16_115200, 2905 2906 pbn_b1_1_921600, 2907 pbn_b1_2_921600, 2908 pbn_b1_4_921600, 2909 pbn_b1_8_921600, 2910 2911 pbn_b1_2_1250000, 2912 2913 pbn_b1_bt_1_115200, 2914 pbn_b1_bt_2_115200, 2915 pbn_b1_bt_4_115200, 2916 2917 pbn_b1_bt_2_921600, 2918 2919 pbn_b1_1_1382400, 2920 pbn_b1_2_1382400, 2921 pbn_b1_4_1382400, 2922 pbn_b1_8_1382400, 2923 2924 pbn_b2_1_115200, 2925 pbn_b2_2_115200, 2926 pbn_b2_4_115200, 2927 pbn_b2_8_115200, 2928 2929 pbn_b2_1_460800, 2930 pbn_b2_4_460800, 2931 pbn_b2_8_460800, 2932 pbn_b2_16_460800, 2933 2934 pbn_b2_1_921600, 2935 pbn_b2_4_921600, 2936 pbn_b2_8_921600, 2937 2938 pbn_b2_8_1152000, 2939 2940 pbn_b2_bt_1_115200, 2941 pbn_b2_bt_2_115200, 2942 pbn_b2_bt_4_115200, 2943 2944 pbn_b2_bt_2_921600, 2945 pbn_b2_bt_4_921600, 2946 2947 pbn_b3_2_115200, 2948 pbn_b3_4_115200, 2949 pbn_b3_8_115200, 2950 2951 pbn_b4_bt_2_921600, 2952 pbn_b4_bt_4_921600, 2953 pbn_b4_bt_8_921600, 2954 2955 /* 2956 * Board-specific versions. 2957 */ 2958 pbn_panacom, 2959 pbn_panacom2, 2960 pbn_panacom4, 2961 pbn_plx_romulus, 2962 pbn_oxsemi, 2963 pbn_oxsemi_1_15625000, 2964 pbn_oxsemi_2_15625000, 2965 pbn_oxsemi_4_15625000, 2966 pbn_oxsemi_8_15625000, 2967 pbn_intel_i960, 2968 pbn_sgi_ioc3, 2969 pbn_computone_4, 2970 pbn_computone_6, 2971 pbn_computone_8, 2972 pbn_sbsxrsio, 2973 pbn_pasemi_1682M, 2974 pbn_ni8430_2, 2975 pbn_ni8430_4, 2976 pbn_ni8430_8, 2977 pbn_ni8430_16, 2978 pbn_ADDIDATA_PCIe_1_3906250, 2979 pbn_ADDIDATA_PCIe_2_3906250, 2980 pbn_ADDIDATA_PCIe_4_3906250, 2981 pbn_ADDIDATA_PCIe_8_3906250, 2982 pbn_ce4100_1_115200, 2983 pbn_omegapci, 2984 pbn_NETMOS9900_2s_115200, 2985 pbn_brcm_trumanage, 2986 pbn_fintek_4, 2987 pbn_fintek_8, 2988 pbn_fintek_12, 2989 pbn_fintek_F81504A, 2990 pbn_fintek_F81508A, 2991 pbn_fintek_F81512A, 2992 pbn_wch382_2, 2993 pbn_wch384_4, 2994 pbn_wch384_8, 2995 pbn_sunix_pci_1s, 2996 pbn_sunix_pci_2s, 2997 pbn_sunix_pci_4s, 2998 pbn_sunix_pci_8s, 2999 pbn_sunix_pci_16s, 3000 pbn_titan_1_4000000, 3001 pbn_titan_2_4000000, 3002 pbn_titan_4_4000000, 3003 pbn_titan_8_4000000, 3004 pbn_moxa8250_2p, 3005 pbn_moxa8250_4p, 3006 pbn_moxa8250_8p, 3007 }; 3008 3009 /* 3010 * uart_offset - the space between channels 3011 * reg_shift - describes how the UART registers are mapped 3012 * to PCI memory by the card. 3013 * For example IER register on SBS, Inc. PMC-OctPro is located at 3014 * offset 0x10 from the UART base, while UART_IER is defined as 1 3015 * in include/linux/serial_reg.h, 3016 * see first lines of serial_in() and serial_out() in 8250.c 3017 */ 3018 3019 static struct pciserial_board pci_boards[] = { 3020 [pbn_default] = { 3021 .flags = FL_BASE0, 3022 .num_ports = 1, 3023 .base_baud = 115200, 3024 .uart_offset = 8, 3025 }, 3026 [pbn_b0_1_115200] = { 3027 .flags = FL_BASE0, 3028 .num_ports = 1, 3029 .base_baud = 115200, 3030 .uart_offset = 8, 3031 }, 3032 [pbn_b0_2_115200] = { 3033 .flags = FL_BASE0, 3034 .num_ports = 2, 3035 .base_baud = 115200, 3036 .uart_offset = 8, 3037 }, 3038 [pbn_b0_4_115200] = { 3039 .flags = FL_BASE0, 3040 .num_ports = 4, 3041 .base_baud = 115200, 3042 .uart_offset = 8, 3043 }, 3044 [pbn_b0_5_115200] = { 3045 .flags = FL_BASE0, 3046 .num_ports = 5, 3047 .base_baud = 115200, 3048 .uart_offset = 8, 3049 }, 3050 [pbn_b0_8_115200] = { 3051 .flags = FL_BASE0, 3052 .num_ports = 8, 3053 .base_baud = 115200, 3054 .uart_offset = 8, 3055 }, 3056 [pbn_b0_1_921600] = { 3057 .flags = FL_BASE0, 3058 .num_ports = 1, 3059 .base_baud = 921600, 3060 .uart_offset = 8, 3061 }, 3062 [pbn_b0_2_921600] = { 3063 .flags = FL_BASE0, 3064 .num_ports = 2, 3065 .base_baud = 921600, 3066 .uart_offset = 8, 3067 }, 3068 [pbn_b0_4_921600] = { 3069 .flags = FL_BASE0, 3070 .num_ports = 4, 3071 .base_baud = 921600, 3072 .uart_offset = 8, 3073 }, 3074 3075 [pbn_b0_2_1130000] = { 3076 .flags = FL_BASE0, 3077 .num_ports = 2, 3078 .base_baud = 1130000, 3079 .uart_offset = 8, 3080 }, 3081 3082 [pbn_b0_4_1152000] = { 3083 .flags = FL_BASE0, 3084 .num_ports = 4, 3085 .base_baud = 1152000, 3086 .uart_offset = 8, 3087 }, 3088 3089 [pbn_b0_4_1250000] = { 3090 .flags = FL_BASE0, 3091 .num_ports = 4, 3092 .base_baud = 1250000, 3093 .uart_offset = 8, 3094 }, 3095 3096 [pbn_b0_2_1843200] = { 3097 .flags = FL_BASE0, 3098 .num_ports = 2, 3099 .base_baud = 1843200, 3100 .uart_offset = 8, 3101 }, 3102 [pbn_b0_4_1843200] = { 3103 .flags = FL_BASE0, 3104 .num_ports = 4, 3105 .base_baud = 1843200, 3106 .uart_offset = 8, 3107 }, 3108 3109 [pbn_b0_1_15625000] = { 3110 .flags = FL_BASE0, 3111 .num_ports = 1, 3112 .base_baud = 15625000, 3113 .uart_offset = 8, 3114 }, 3115 3116 [pbn_b0_bt_1_115200] = { 3117 .flags = FL_BASE0|FL_BASE_BARS, 3118 .num_ports = 1, 3119 .base_baud = 115200, 3120 .uart_offset = 8, 3121 }, 3122 [pbn_b0_bt_2_115200] = { 3123 .flags = FL_BASE0|FL_BASE_BARS, 3124 .num_ports = 2, 3125 .base_baud = 115200, 3126 .uart_offset = 8, 3127 }, 3128 [pbn_b0_bt_4_115200] = { 3129 .flags = FL_BASE0|FL_BASE_BARS, 3130 .num_ports = 4, 3131 .base_baud = 115200, 3132 .uart_offset = 8, 3133 }, 3134 [pbn_b0_bt_8_115200] = { 3135 .flags = FL_BASE0|FL_BASE_BARS, 3136 .num_ports = 8, 3137 .base_baud = 115200, 3138 .uart_offset = 8, 3139 }, 3140 3141 [pbn_b0_bt_1_460800] = { 3142 .flags = FL_BASE0|FL_BASE_BARS, 3143 .num_ports = 1, 3144 .base_baud = 460800, 3145 .uart_offset = 8, 3146 }, 3147 [pbn_b0_bt_2_460800] = { 3148 .flags = FL_BASE0|FL_BASE_BARS, 3149 .num_ports = 2, 3150 .base_baud = 460800, 3151 .uart_offset = 8, 3152 }, 3153 [pbn_b0_bt_4_460800] = { 3154 .flags = FL_BASE0|FL_BASE_BARS, 3155 .num_ports = 4, 3156 .base_baud = 460800, 3157 .uart_offset = 8, 3158 }, 3159 3160 [pbn_b0_bt_1_921600] = { 3161 .flags = FL_BASE0|FL_BASE_BARS, 3162 .num_ports = 1, 3163 .base_baud = 921600, 3164 .uart_offset = 8, 3165 }, 3166 [pbn_b0_bt_2_921600] = { 3167 .flags = FL_BASE0|FL_BASE_BARS, 3168 .num_ports = 2, 3169 .base_baud = 921600, 3170 .uart_offset = 8, 3171 }, 3172 [pbn_b0_bt_4_921600] = { 3173 .flags = FL_BASE0|FL_BASE_BARS, 3174 .num_ports = 4, 3175 .base_baud = 921600, 3176 .uart_offset = 8, 3177 }, 3178 [pbn_b0_bt_8_921600] = { 3179 .flags = FL_BASE0|FL_BASE_BARS, 3180 .num_ports = 8, 3181 .base_baud = 921600, 3182 .uart_offset = 8, 3183 }, 3184 3185 [pbn_b1_1_115200] = { 3186 .flags = FL_BASE1, 3187 .num_ports = 1, 3188 .base_baud = 115200, 3189 .uart_offset = 8, 3190 }, 3191 [pbn_b1_2_115200] = { 3192 .flags = FL_BASE1, 3193 .num_ports = 2, 3194 .base_baud = 115200, 3195 .uart_offset = 8, 3196 }, 3197 [pbn_b1_4_115200] = { 3198 .flags = FL_BASE1, 3199 .num_ports = 4, 3200 .base_baud = 115200, 3201 .uart_offset = 8, 3202 }, 3203 [pbn_b1_8_115200] = { 3204 .flags = FL_BASE1, 3205 .num_ports = 8, 3206 .base_baud = 115200, 3207 .uart_offset = 8, 3208 }, 3209 [pbn_b1_16_115200] = { 3210 .flags = FL_BASE1, 3211 .num_ports = 16, 3212 .base_baud = 115200, 3213 .uart_offset = 8, 3214 }, 3215 3216 [pbn_b1_1_921600] = { 3217 .flags = FL_BASE1, 3218 .num_ports = 1, 3219 .base_baud = 921600, 3220 .uart_offset = 8, 3221 }, 3222 [pbn_b1_2_921600] = { 3223 .flags = FL_BASE1, 3224 .num_ports = 2, 3225 .base_baud = 921600, 3226 .uart_offset = 8, 3227 }, 3228 [pbn_b1_4_921600] = { 3229 .flags = FL_BASE1, 3230 .num_ports = 4, 3231 .base_baud = 921600, 3232 .uart_offset = 8, 3233 }, 3234 [pbn_b1_8_921600] = { 3235 .flags = FL_BASE1, 3236 .num_ports = 8, 3237 .base_baud = 921600, 3238 .uart_offset = 8, 3239 }, 3240 [pbn_b1_2_1250000] = { 3241 .flags = FL_BASE1, 3242 .num_ports = 2, 3243 .base_baud = 1250000, 3244 .uart_offset = 8, 3245 }, 3246 3247 [pbn_b1_bt_1_115200] = { 3248 .flags = FL_BASE1|FL_BASE_BARS, 3249 .num_ports = 1, 3250 .base_baud = 115200, 3251 .uart_offset = 8, 3252 }, 3253 [pbn_b1_bt_2_115200] = { 3254 .flags = FL_BASE1|FL_BASE_BARS, 3255 .num_ports = 2, 3256 .base_baud = 115200, 3257 .uart_offset = 8, 3258 }, 3259 [pbn_b1_bt_4_115200] = { 3260 .flags = FL_BASE1|FL_BASE_BARS, 3261 .num_ports = 4, 3262 .base_baud = 115200, 3263 .uart_offset = 8, 3264 }, 3265 3266 [pbn_b1_bt_2_921600] = { 3267 .flags = FL_BASE1|FL_BASE_BARS, 3268 .num_ports = 2, 3269 .base_baud = 921600, 3270 .uart_offset = 8, 3271 }, 3272 3273 [pbn_b1_1_1382400] = { 3274 .flags = FL_BASE1, 3275 .num_ports = 1, 3276 .base_baud = 1382400, 3277 .uart_offset = 8, 3278 }, 3279 [pbn_b1_2_1382400] = { 3280 .flags = FL_BASE1, 3281 .num_ports = 2, 3282 .base_baud = 1382400, 3283 .uart_offset = 8, 3284 }, 3285 [pbn_b1_4_1382400] = { 3286 .flags = FL_BASE1, 3287 .num_ports = 4, 3288 .base_baud = 1382400, 3289 .uart_offset = 8, 3290 }, 3291 [pbn_b1_8_1382400] = { 3292 .flags = FL_BASE1, 3293 .num_ports = 8, 3294 .base_baud = 1382400, 3295 .uart_offset = 8, 3296 }, 3297 3298 [pbn_b2_1_115200] = { 3299 .flags = FL_BASE2, 3300 .num_ports = 1, 3301 .base_baud = 115200, 3302 .uart_offset = 8, 3303 }, 3304 [pbn_b2_2_115200] = { 3305 .flags = FL_BASE2, 3306 .num_ports = 2, 3307 .base_baud = 115200, 3308 .uart_offset = 8, 3309 }, 3310 [pbn_b2_4_115200] = { 3311 .flags = FL_BASE2, 3312 .num_ports = 4, 3313 .base_baud = 115200, 3314 .uart_offset = 8, 3315 }, 3316 [pbn_b2_8_115200] = { 3317 .flags = FL_BASE2, 3318 .num_ports = 8, 3319 .base_baud = 115200, 3320 .uart_offset = 8, 3321 }, 3322 3323 [pbn_b2_1_460800] = { 3324 .flags = FL_BASE2, 3325 .num_ports = 1, 3326 .base_baud = 460800, 3327 .uart_offset = 8, 3328 }, 3329 [pbn_b2_4_460800] = { 3330 .flags = FL_BASE2, 3331 .num_ports = 4, 3332 .base_baud = 460800, 3333 .uart_offset = 8, 3334 }, 3335 [pbn_b2_8_460800] = { 3336 .flags = FL_BASE2, 3337 .num_ports = 8, 3338 .base_baud = 460800, 3339 .uart_offset = 8, 3340 }, 3341 [pbn_b2_16_460800] = { 3342 .flags = FL_BASE2, 3343 .num_ports = 16, 3344 .base_baud = 460800, 3345 .uart_offset = 8, 3346 }, 3347 3348 [pbn_b2_1_921600] = { 3349 .flags = FL_BASE2, 3350 .num_ports = 1, 3351 .base_baud = 921600, 3352 .uart_offset = 8, 3353 }, 3354 [pbn_b2_4_921600] = { 3355 .flags = FL_BASE2, 3356 .num_ports = 4, 3357 .base_baud = 921600, 3358 .uart_offset = 8, 3359 }, 3360 [pbn_b2_8_921600] = { 3361 .flags = FL_BASE2, 3362 .num_ports = 8, 3363 .base_baud = 921600, 3364 .uart_offset = 8, 3365 }, 3366 3367 [pbn_b2_8_1152000] = { 3368 .flags = FL_BASE2, 3369 .num_ports = 8, 3370 .base_baud = 1152000, 3371 .uart_offset = 8, 3372 }, 3373 3374 [pbn_b2_bt_1_115200] = { 3375 .flags = FL_BASE2|FL_BASE_BARS, 3376 .num_ports = 1, 3377 .base_baud = 115200, 3378 .uart_offset = 8, 3379 }, 3380 [pbn_b2_bt_2_115200] = { 3381 .flags = FL_BASE2|FL_BASE_BARS, 3382 .num_ports = 2, 3383 .base_baud = 115200, 3384 .uart_offset = 8, 3385 }, 3386 [pbn_b2_bt_4_115200] = { 3387 .flags = FL_BASE2|FL_BASE_BARS, 3388 .num_ports = 4, 3389 .base_baud = 115200, 3390 .uart_offset = 8, 3391 }, 3392 3393 [pbn_b2_bt_2_921600] = { 3394 .flags = FL_BASE2|FL_BASE_BARS, 3395 .num_ports = 2, 3396 .base_baud = 921600, 3397 .uart_offset = 8, 3398 }, 3399 [pbn_b2_bt_4_921600] = { 3400 .flags = FL_BASE2|FL_BASE_BARS, 3401 .num_ports = 4, 3402 .base_baud = 921600, 3403 .uart_offset = 8, 3404 }, 3405 3406 [pbn_b3_2_115200] = { 3407 .flags = FL_BASE3, 3408 .num_ports = 2, 3409 .base_baud = 115200, 3410 .uart_offset = 8, 3411 }, 3412 [pbn_b3_4_115200] = { 3413 .flags = FL_BASE3, 3414 .num_ports = 4, 3415 .base_baud = 115200, 3416 .uart_offset = 8, 3417 }, 3418 [pbn_b3_8_115200] = { 3419 .flags = FL_BASE3, 3420 .num_ports = 8, 3421 .base_baud = 115200, 3422 .uart_offset = 8, 3423 }, 3424 3425 [pbn_b4_bt_2_921600] = { 3426 .flags = FL_BASE4, 3427 .num_ports = 2, 3428 .base_baud = 921600, 3429 .uart_offset = 8, 3430 }, 3431 [pbn_b4_bt_4_921600] = { 3432 .flags = FL_BASE4, 3433 .num_ports = 4, 3434 .base_baud = 921600, 3435 .uart_offset = 8, 3436 }, 3437 [pbn_b4_bt_8_921600] = { 3438 .flags = FL_BASE4, 3439 .num_ports = 8, 3440 .base_baud = 921600, 3441 .uart_offset = 8, 3442 }, 3443 3444 /* 3445 * Entries following this are board-specific. 3446 */ 3447 3448 /* 3449 * Panacom - IOMEM 3450 */ 3451 [pbn_panacom] = { 3452 .flags = FL_BASE2, 3453 .num_ports = 2, 3454 .base_baud = 921600, 3455 .uart_offset = 0x400, 3456 .reg_shift = 7, 3457 }, 3458 [pbn_panacom2] = { 3459 .flags = FL_BASE2|FL_BASE_BARS, 3460 .num_ports = 2, 3461 .base_baud = 921600, 3462 .uart_offset = 0x400, 3463 .reg_shift = 7, 3464 }, 3465 [pbn_panacom4] = { 3466 .flags = FL_BASE2|FL_BASE_BARS, 3467 .num_ports = 4, 3468 .base_baud = 921600, 3469 .uart_offset = 0x400, 3470 .reg_shift = 7, 3471 }, 3472 3473 /* I think this entry is broken - the first_offset looks wrong --rmk */ 3474 [pbn_plx_romulus] = { 3475 .flags = FL_BASE2, 3476 .num_ports = 4, 3477 .base_baud = 921600, 3478 .uart_offset = 8 << 2, 3479 .reg_shift = 2, 3480 .first_offset = 0x03, 3481 }, 3482 3483 /* 3484 * This board uses the size of PCI Base region 0 to 3485 * signal now many ports are available 3486 */ 3487 [pbn_oxsemi] = { 3488 .flags = FL_BASE0|FL_REGION_SZ_CAP, 3489 .num_ports = 32, 3490 .base_baud = 115200, 3491 .uart_offset = 8, 3492 }, 3493 [pbn_oxsemi_1_15625000] = { 3494 .flags = FL_BASE0, 3495 .num_ports = 1, 3496 .base_baud = 15625000, 3497 .uart_offset = 0x200, 3498 .first_offset = 0x1000, 3499 }, 3500 [pbn_oxsemi_2_15625000] = { 3501 .flags = FL_BASE0, 3502 .num_ports = 2, 3503 .base_baud = 15625000, 3504 .uart_offset = 0x200, 3505 .first_offset = 0x1000, 3506 }, 3507 [pbn_oxsemi_4_15625000] = { 3508 .flags = FL_BASE0, 3509 .num_ports = 4, 3510 .base_baud = 15625000, 3511 .uart_offset = 0x200, 3512 .first_offset = 0x1000, 3513 }, 3514 [pbn_oxsemi_8_15625000] = { 3515 .flags = FL_BASE0, 3516 .num_ports = 8, 3517 .base_baud = 15625000, 3518 .uart_offset = 0x200, 3519 .first_offset = 0x1000, 3520 }, 3521 3522 3523 /* 3524 * EKF addition for i960 Boards form EKF with serial port. 3525 * Max 256 ports. 3526 */ 3527 [pbn_intel_i960] = { 3528 .flags = FL_BASE0, 3529 .num_ports = 32, 3530 .base_baud = 921600, 3531 .uart_offset = 8 << 2, 3532 .reg_shift = 2, 3533 .first_offset = 0x10000, 3534 }, 3535 [pbn_sgi_ioc3] = { 3536 .flags = FL_BASE0|FL_NOIRQ, 3537 .num_ports = 1, 3538 .base_baud = 458333, 3539 .uart_offset = 8, 3540 .reg_shift = 0, 3541 .first_offset = 0x20178, 3542 }, 3543 3544 /* 3545 * Computone - uses IOMEM. 3546 */ 3547 [pbn_computone_4] = { 3548 .flags = FL_BASE0, 3549 .num_ports = 4, 3550 .base_baud = 921600, 3551 .uart_offset = 0x40, 3552 .reg_shift = 2, 3553 .first_offset = 0x200, 3554 }, 3555 [pbn_computone_6] = { 3556 .flags = FL_BASE0, 3557 .num_ports = 6, 3558 .base_baud = 921600, 3559 .uart_offset = 0x40, 3560 .reg_shift = 2, 3561 .first_offset = 0x200, 3562 }, 3563 [pbn_computone_8] = { 3564 .flags = FL_BASE0, 3565 .num_ports = 8, 3566 .base_baud = 921600, 3567 .uart_offset = 0x40, 3568 .reg_shift = 2, 3569 .first_offset = 0x200, 3570 }, 3571 [pbn_sbsxrsio] = { 3572 .flags = FL_BASE0, 3573 .num_ports = 8, 3574 .base_baud = 460800, 3575 .uart_offset = 256, 3576 .reg_shift = 4, 3577 }, 3578 /* 3579 * PA Semi PWRficient PA6T-1682M on-chip UART 3580 */ 3581 [pbn_pasemi_1682M] = { 3582 .flags = FL_BASE0, 3583 .num_ports = 1, 3584 .base_baud = 8333333, 3585 }, 3586 /* 3587 * National Instruments 843x 3588 */ 3589 [pbn_ni8430_16] = { 3590 .flags = FL_BASE0, 3591 .num_ports = 16, 3592 .base_baud = 3686400, 3593 .uart_offset = 0x10, 3594 .first_offset = 0x800, 3595 }, 3596 [pbn_ni8430_8] = { 3597 .flags = FL_BASE0, 3598 .num_ports = 8, 3599 .base_baud = 3686400, 3600 .uart_offset = 0x10, 3601 .first_offset = 0x800, 3602 }, 3603 [pbn_ni8430_4] = { 3604 .flags = FL_BASE0, 3605 .num_ports = 4, 3606 .base_baud = 3686400, 3607 .uart_offset = 0x10, 3608 .first_offset = 0x800, 3609 }, 3610 [pbn_ni8430_2] = { 3611 .flags = FL_BASE0, 3612 .num_ports = 2, 3613 .base_baud = 3686400, 3614 .uart_offset = 0x10, 3615 .first_offset = 0x800, 3616 }, 3617 /* 3618 * ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com> 3619 */ 3620 [pbn_ADDIDATA_PCIe_1_3906250] = { 3621 .flags = FL_BASE0, 3622 .num_ports = 1, 3623 .base_baud = 3906250, 3624 .uart_offset = 0x200, 3625 .first_offset = 0x1000, 3626 }, 3627 [pbn_ADDIDATA_PCIe_2_3906250] = { 3628 .flags = FL_BASE0, 3629 .num_ports = 2, 3630 .base_baud = 3906250, 3631 .uart_offset = 0x200, 3632 .first_offset = 0x1000, 3633 }, 3634 [pbn_ADDIDATA_PCIe_4_3906250] = { 3635 .flags = FL_BASE0, 3636 .num_ports = 4, 3637 .base_baud = 3906250, 3638 .uart_offset = 0x200, 3639 .first_offset = 0x1000, 3640 }, 3641 [pbn_ADDIDATA_PCIe_8_3906250] = { 3642 .flags = FL_BASE0, 3643 .num_ports = 8, 3644 .base_baud = 3906250, 3645 .uart_offset = 0x200, 3646 .first_offset = 0x1000, 3647 }, 3648 [pbn_ce4100_1_115200] = { 3649 .flags = FL_BASE_BARS, 3650 .num_ports = 2, 3651 .base_baud = 921600, 3652 .reg_shift = 2, 3653 }, 3654 [pbn_omegapci] = { 3655 .flags = FL_BASE0, 3656 .num_ports = 8, 3657 .base_baud = 115200, 3658 .uart_offset = 0x200, 3659 }, 3660 [pbn_NETMOS9900_2s_115200] = { 3661 .flags = FL_BASE0, 3662 .num_ports = 2, 3663 .base_baud = 115200, 3664 }, 3665 [pbn_brcm_trumanage] = { 3666 .flags = FL_BASE0, 3667 .num_ports = 1, 3668 .reg_shift = 2, 3669 .base_baud = 115200, 3670 }, 3671 [pbn_fintek_4] = { 3672 .num_ports = 4, 3673 .uart_offset = 8, 3674 .base_baud = 115200, 3675 .first_offset = 0x40, 3676 }, 3677 [pbn_fintek_8] = { 3678 .num_ports = 8, 3679 .uart_offset = 8, 3680 .base_baud = 115200, 3681 .first_offset = 0x40, 3682 }, 3683 [pbn_fintek_12] = { 3684 .num_ports = 12, 3685 .uart_offset = 8, 3686 .base_baud = 115200, 3687 .first_offset = 0x40, 3688 }, 3689 [pbn_fintek_F81504A] = { 3690 .num_ports = 4, 3691 .uart_offset = 8, 3692 .base_baud = 115200, 3693 }, 3694 [pbn_fintek_F81508A] = { 3695 .num_ports = 8, 3696 .uart_offset = 8, 3697 .base_baud = 115200, 3698 }, 3699 [pbn_fintek_F81512A] = { 3700 .num_ports = 12, 3701 .uart_offset = 8, 3702 .base_baud = 115200, 3703 }, 3704 [pbn_wch382_2] = { 3705 .flags = FL_BASE0, 3706 .num_ports = 2, 3707 .base_baud = 115200, 3708 .uart_offset = 8, 3709 .first_offset = 0xC0, 3710 }, 3711 [pbn_wch384_4] = { 3712 .flags = FL_BASE0, 3713 .num_ports = 4, 3714 .base_baud = 115200, 3715 .uart_offset = 8, 3716 .first_offset = 0xC0, 3717 }, 3718 [pbn_wch384_8] = { 3719 .flags = FL_BASE0, 3720 .num_ports = 8, 3721 .base_baud = 115200, 3722 .uart_offset = 8, 3723 .first_offset = 0x00, 3724 }, 3725 [pbn_sunix_pci_1s] = { 3726 .num_ports = 1, 3727 .base_baud = 921600, 3728 .uart_offset = 0x8, 3729 }, 3730 [pbn_sunix_pci_2s] = { 3731 .num_ports = 2, 3732 .base_baud = 921600, 3733 .uart_offset = 0x8, 3734 }, 3735 [pbn_sunix_pci_4s] = { 3736 .num_ports = 4, 3737 .base_baud = 921600, 3738 .uart_offset = 0x8, 3739 }, 3740 [pbn_sunix_pci_8s] = { 3741 .num_ports = 8, 3742 .base_baud = 921600, 3743 .uart_offset = 0x8, 3744 }, 3745 [pbn_sunix_pci_16s] = { 3746 .num_ports = 16, 3747 .base_baud = 921600, 3748 .uart_offset = 0x8, 3749 }, 3750 [pbn_titan_1_4000000] = { 3751 .flags = FL_BASE0, 3752 .num_ports = 1, 3753 .base_baud = 4000000, 3754 .uart_offset = 0x200, 3755 .first_offset = 0x1000, 3756 }, 3757 [pbn_titan_2_4000000] = { 3758 .flags = FL_BASE0, 3759 .num_ports = 2, 3760 .base_baud = 4000000, 3761 .uart_offset = 0x200, 3762 .first_offset = 0x1000, 3763 }, 3764 [pbn_titan_4_4000000] = { 3765 .flags = FL_BASE0, 3766 .num_ports = 4, 3767 .base_baud = 4000000, 3768 .uart_offset = 0x200, 3769 .first_offset = 0x1000, 3770 }, 3771 [pbn_titan_8_4000000] = { 3772 .flags = FL_BASE0, 3773 .num_ports = 8, 3774 .base_baud = 4000000, 3775 .uart_offset = 0x200, 3776 .first_offset = 0x1000, 3777 }, 3778 [pbn_moxa8250_2p] = { 3779 .flags = FL_BASE1, 3780 .num_ports = 2, 3781 .base_baud = 921600, 3782 .uart_offset = 0x200, 3783 }, 3784 [pbn_moxa8250_4p] = { 3785 .flags = FL_BASE1, 3786 .num_ports = 4, 3787 .base_baud = 921600, 3788 .uart_offset = 0x200, 3789 }, 3790 [pbn_moxa8250_8p] = { 3791 .flags = FL_BASE1, 3792 .num_ports = 8, 3793 .base_baud = 921600, 3794 .uart_offset = 0x200, 3795 }, 3796 }; 3797 3798 #define REPORT_CONFIG(option) \ 3799 (IS_ENABLED(CONFIG_##option) ? 0 : (kernel_ulong_t)&#option) 3800 #define REPORT_8250_CONFIG(option) \ 3801 (IS_ENABLED(CONFIG_SERIAL_8250_##option) ? \ 3802 0 : (kernel_ulong_t)&"SERIAL_8250_"#option) 3803 3804 static const struct pci_device_id blacklist[] = { 3805 /* softmodems */ 3806 { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */ 3807 { PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */ 3808 { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */ 3809 3810 /* multi-io cards handled by parport_serial */ 3811 /* WCH CH353 2S1P */ 3812 { PCI_DEVICE(0x4348, 0x7053), 0, 0, REPORT_CONFIG(PARPORT_SERIAL), }, 3813 /* WCH CH353 1S1P */ 3814 { PCI_DEVICE(0x4348, 0x5053), 0, 0, REPORT_CONFIG(PARPORT_SERIAL), }, 3815 /* WCH CH382 2S1P */ 3816 { PCI_DEVICE(0x1c00, 0x3250), 0, 0, REPORT_CONFIG(PARPORT_SERIAL), }, 3817 3818 /* Intel platforms with MID UART */ 3819 { PCI_VDEVICE(INTEL, 0x081b), REPORT_8250_CONFIG(MID), }, 3820 { PCI_VDEVICE(INTEL, 0x081c), REPORT_8250_CONFIG(MID), }, 3821 { PCI_VDEVICE(INTEL, 0x081d), REPORT_8250_CONFIG(MID), }, 3822 { PCI_VDEVICE(INTEL, 0x1191), REPORT_8250_CONFIG(MID), }, 3823 { PCI_VDEVICE(INTEL, 0x18d8), REPORT_8250_CONFIG(MID), }, 3824 { PCI_VDEVICE(INTEL, 0x19d8), REPORT_8250_CONFIG(MID), }, 3825 3826 /* Intel platforms with DesignWare UART */ 3827 { PCI_VDEVICE(INTEL, 0x0936), REPORT_8250_CONFIG(LPSS), }, 3828 { PCI_VDEVICE(INTEL, 0x0f0a), REPORT_8250_CONFIG(LPSS), }, 3829 { PCI_VDEVICE(INTEL, 0x0f0c), REPORT_8250_CONFIG(LPSS), }, 3830 { PCI_VDEVICE(INTEL, 0x228a), REPORT_8250_CONFIG(LPSS), }, 3831 { PCI_VDEVICE(INTEL, 0x228c), REPORT_8250_CONFIG(LPSS), }, 3832 { PCI_VDEVICE(INTEL, 0x4b96), REPORT_8250_CONFIG(LPSS), }, 3833 { PCI_VDEVICE(INTEL, 0x4b97), REPORT_8250_CONFIG(LPSS), }, 3834 { PCI_VDEVICE(INTEL, 0x4b98), REPORT_8250_CONFIG(LPSS), }, 3835 { PCI_VDEVICE(INTEL, 0x4b99), REPORT_8250_CONFIG(LPSS), }, 3836 { PCI_VDEVICE(INTEL, 0x4b9a), REPORT_8250_CONFIG(LPSS), }, 3837 { PCI_VDEVICE(INTEL, 0x4b9b), REPORT_8250_CONFIG(LPSS), }, 3838 { PCI_VDEVICE(INTEL, 0x9ce3), REPORT_8250_CONFIG(LPSS), }, 3839 { PCI_VDEVICE(INTEL, 0x9ce4), REPORT_8250_CONFIG(LPSS), }, 3840 3841 /* Exar devices */ 3842 { PCI_VDEVICE(EXAR, PCI_ANY_ID), REPORT_8250_CONFIG(EXAR), }, 3843 { PCI_VDEVICE(COMMTECH, PCI_ANY_ID), REPORT_8250_CONFIG(EXAR), }, 3844 3845 /* Pericom devices */ 3846 { PCI_VDEVICE(PERICOM, PCI_ANY_ID), REPORT_8250_CONFIG(PERICOM), }, 3847 { PCI_VDEVICE(ACCESSIO, PCI_ANY_ID), REPORT_8250_CONFIG(PERICOM), }, 3848 3849 /* End of the black list */ 3850 { } 3851 }; 3852 3853 static int serial_pci_is_class_communication(struct pci_dev *dev) 3854 { 3855 /* 3856 * If it is not a communications device or the programming 3857 * interface is greater than 6, give up. 3858 */ 3859 if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && 3860 ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MULTISERIAL) && 3861 ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || 3862 (dev->class & 0xff) > 6) 3863 return -ENODEV; 3864 3865 return 0; 3866 } 3867 3868 /* 3869 * Given a complete unknown PCI device, try to use some heuristics to 3870 * guess what the configuration might be, based on the pitiful PCI 3871 * serial specs. Returns 0 on success, -ENODEV on failure. 3872 */ 3873 static int 3874 serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) 3875 { 3876 int num_iomem, num_port, first_port = -1, i; 3877 int rc; 3878 3879 rc = serial_pci_is_class_communication(dev); 3880 if (rc) 3881 return rc; 3882 3883 /* 3884 * Should we try to make guesses for multiport serial devices later? 3885 */ 3886 if ((dev->class >> 8) == PCI_CLASS_COMMUNICATION_MULTISERIAL) 3887 return -ENODEV; 3888 3889 num_iomem = num_port = 0; 3890 for (i = 0; i < PCI_STD_NUM_BARS; i++) { 3891 if (pci_resource_flags(dev, i) & IORESOURCE_IO) { 3892 num_port++; 3893 if (first_port == -1) 3894 first_port = i; 3895 } 3896 if (pci_resource_flags(dev, i) & IORESOURCE_MEM) 3897 num_iomem++; 3898 } 3899 3900 /* 3901 * If there is 1 or 0 iomem regions, and exactly one port, 3902 * use it. We guess the number of ports based on the IO 3903 * region size. 3904 */ 3905 if (num_iomem <= 1 && num_port == 1) { 3906 board->flags = first_port; 3907 board->num_ports = pci_resource_len(dev, first_port) / 8; 3908 return 0; 3909 } 3910 3911 /* 3912 * Now guess if we've got a board which indexes by BARs. 3913 * Each IO BAR should be 8 bytes, and they should follow 3914 * consecutively. 3915 */ 3916 first_port = -1; 3917 num_port = 0; 3918 for (i = 0; i < PCI_STD_NUM_BARS; i++) { 3919 if (pci_resource_flags(dev, i) & IORESOURCE_IO && 3920 pci_resource_len(dev, i) == 8 && 3921 (first_port == -1 || (first_port + num_port) == i)) { 3922 num_port++; 3923 if (first_port == -1) 3924 first_port = i; 3925 } 3926 } 3927 3928 if (num_port > 1) { 3929 board->flags = first_port | FL_BASE_BARS; 3930 board->num_ports = num_port; 3931 return 0; 3932 } 3933 3934 return -ENODEV; 3935 } 3936 3937 static inline int 3938 serial_pci_matches(const struct pciserial_board *board, 3939 const struct pciserial_board *guessed) 3940 { 3941 return 3942 board->num_ports == guessed->num_ports && 3943 board->base_baud == guessed->base_baud && 3944 board->uart_offset == guessed->uart_offset && 3945 board->reg_shift == guessed->reg_shift && 3946 board->first_offset == guessed->first_offset; 3947 } 3948 3949 struct serial_private * 3950 pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) 3951 { 3952 struct uart_8250_port uart; 3953 struct serial_private *priv; 3954 struct pci_serial_quirk *quirk; 3955 int rc, nr_ports, i; 3956 3957 nr_ports = board->num_ports; 3958 3959 /* 3960 * Find an init and setup quirks. 3961 */ 3962 quirk = find_quirk(dev); 3963 3964 /* 3965 * Run the new-style initialization function. 3966 * The initialization function returns: 3967 * <0 - error 3968 * 0 - use board->num_ports 3969 * >0 - number of ports 3970 */ 3971 if (quirk->init) { 3972 rc = quirk->init(dev); 3973 if (rc < 0) { 3974 priv = ERR_PTR(rc); 3975 goto err_out; 3976 } 3977 if (rc) 3978 nr_ports = rc; 3979 } 3980 3981 priv = kzalloc(struct_size(priv, line, nr_ports), GFP_KERNEL); 3982 if (!priv) { 3983 priv = ERR_PTR(-ENOMEM); 3984 goto err_deinit; 3985 } 3986 3987 priv->dev = dev; 3988 priv->quirk = quirk; 3989 3990 memset(&uart, 0, sizeof(uart)); 3991 uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; 3992 uart.port.uartclk = board->base_baud * 16; 3993 3994 if (board->flags & FL_NOIRQ) { 3995 uart.port.irq = 0; 3996 } else { 3997 if (pci_match_id(pci_use_msi, dev)) { 3998 pci_dbg(dev, "Using MSI(-X) interrupts\n"); 3999 pci_set_master(dev); 4000 uart.port.flags &= ~UPF_SHARE_IRQ; 4001 rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES); 4002 } else { 4003 pci_dbg(dev, "Using legacy interrupts\n"); 4004 rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY); 4005 } 4006 if (rc < 0) { 4007 kfree(priv); 4008 priv = ERR_PTR(rc); 4009 goto err_deinit; 4010 } 4011 4012 uart.port.irq = pci_irq_vector(dev, 0); 4013 } 4014 4015 uart.port.dev = &dev->dev; 4016 4017 for (i = 0; i < nr_ports; i++) { 4018 if (quirk->setup(priv, board, &uart, i)) 4019 break; 4020 4021 pci_dbg(dev, "Setup PCI port: port %lx, irq %d, type %d\n", 4022 uart.port.iobase, uart.port.irq, uart.port.iotype); 4023 4024 priv->line[i] = serial8250_register_8250_port(&uart); 4025 if (priv->line[i] < 0) { 4026 pci_err(dev, 4027 "Couldn't register serial port %lx, irq %d, type %d, error %d\n", 4028 uart.port.iobase, uart.port.irq, 4029 uart.port.iotype, priv->line[i]); 4030 break; 4031 } 4032 } 4033 priv->nr = i; 4034 priv->board = board; 4035 return priv; 4036 4037 err_deinit: 4038 if (quirk->exit) 4039 quirk->exit(dev); 4040 err_out: 4041 return priv; 4042 } 4043 EXPORT_SYMBOL_GPL(pciserial_init_ports); 4044 4045 static void pciserial_detach_ports(struct serial_private *priv) 4046 { 4047 struct pci_serial_quirk *quirk; 4048 int i; 4049 4050 for (i = 0; i < priv->nr; i++) 4051 serial8250_unregister_port(priv->line[i]); 4052 4053 /* 4054 * Find the exit quirks. 4055 */ 4056 quirk = find_quirk(priv->dev); 4057 if (quirk->exit) 4058 quirk->exit(priv->dev); 4059 } 4060 4061 void pciserial_remove_ports(struct serial_private *priv) 4062 { 4063 pciserial_detach_ports(priv); 4064 kfree(priv); 4065 } 4066 EXPORT_SYMBOL_GPL(pciserial_remove_ports); 4067 4068 void pciserial_suspend_ports(struct serial_private *priv) 4069 { 4070 int i; 4071 4072 for (i = 0; i < priv->nr; i++) 4073 if (priv->line[i] >= 0) 4074 serial8250_suspend_port(priv->line[i]); 4075 4076 /* 4077 * Ensure that every init quirk is properly torn down 4078 */ 4079 if (priv->quirk->exit) 4080 priv->quirk->exit(priv->dev); 4081 } 4082 EXPORT_SYMBOL_GPL(pciserial_suspend_ports); 4083 4084 void pciserial_resume_ports(struct serial_private *priv) 4085 { 4086 int i; 4087 4088 /* 4089 * Ensure that the board is correctly configured. 4090 */ 4091 if (priv->quirk->init) 4092 priv->quirk->init(priv->dev); 4093 4094 for (i = 0; i < priv->nr; i++) 4095 if (priv->line[i] >= 0) 4096 serial8250_resume_port(priv->line[i]); 4097 } 4098 EXPORT_SYMBOL_GPL(pciserial_resume_ports); 4099 4100 /* 4101 * Probe one serial board. Unfortunately, there is no rhyme nor reason 4102 * to the arrangement of serial ports on a PCI card. 4103 */ 4104 static int 4105 pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) 4106 { 4107 struct pci_serial_quirk *quirk; 4108 struct serial_private *priv; 4109 const struct pciserial_board *board; 4110 const struct pci_device_id *exclude; 4111 struct pciserial_board tmp; 4112 int rc; 4113 4114 quirk = find_quirk(dev); 4115 if (quirk->probe) { 4116 rc = quirk->probe(dev); 4117 if (rc) 4118 return rc; 4119 } 4120 4121 if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { 4122 pci_err(dev, "invalid driver_data: %ld\n", ent->driver_data); 4123 return -EINVAL; 4124 } 4125 4126 board = &pci_boards[ent->driver_data]; 4127 4128 exclude = pci_match_id(blacklist, dev); 4129 if (exclude) { 4130 if (exclude->driver_data) 4131 pci_warn(dev, "ignoring port, enable %s to handle\n", 4132 (const char *)exclude->driver_data); 4133 return -ENODEV; 4134 } 4135 4136 rc = pcim_enable_device(dev); 4137 pci_save_state(dev); 4138 if (rc) 4139 return rc; 4140 4141 if (ent->driver_data == pbn_default) { 4142 /* 4143 * Use a copy of the pci_board entry for this; 4144 * avoid changing entries in the table. 4145 */ 4146 memcpy(&tmp, board, sizeof(struct pciserial_board)); 4147 board = &tmp; 4148 4149 /* 4150 * We matched one of our class entries. Try to 4151 * determine the parameters of this board. 4152 */ 4153 rc = serial_pci_guess_board(dev, &tmp); 4154 if (rc) 4155 return rc; 4156 } else { 4157 /* 4158 * We matched an explicit entry. If we are able to 4159 * detect this boards settings with our heuristic, 4160 * then we no longer need this entry. 4161 */ 4162 memcpy(&tmp, &pci_boards[pbn_default], 4163 sizeof(struct pciserial_board)); 4164 rc = serial_pci_guess_board(dev, &tmp); 4165 if (rc == 0 && serial_pci_matches(board, &tmp)) 4166 moan_device("Redundant entry in serial pci_table.", 4167 dev); 4168 } 4169 4170 priv = pciserial_init_ports(dev, board); 4171 if (IS_ERR(priv)) 4172 return PTR_ERR(priv); 4173 4174 pci_set_drvdata(dev, priv); 4175 return 0; 4176 } 4177 4178 static void pciserial_remove_one(struct pci_dev *dev) 4179 { 4180 struct serial_private *priv = pci_get_drvdata(dev); 4181 4182 pciserial_remove_ports(priv); 4183 } 4184 4185 #ifdef CONFIG_PM_SLEEP 4186 static int pciserial_suspend_one(struct device *dev) 4187 { 4188 struct serial_private *priv = dev_get_drvdata(dev); 4189 4190 if (priv) 4191 pciserial_suspend_ports(priv); 4192 4193 return 0; 4194 } 4195 4196 static int pciserial_resume_one(struct device *dev) 4197 { 4198 struct pci_dev *pdev = to_pci_dev(dev); 4199 struct serial_private *priv = pci_get_drvdata(pdev); 4200 int err; 4201 4202 if (priv) { 4203 /* 4204 * The device may have been disabled. Re-enable it. 4205 */ 4206 err = pci_enable_device(pdev); 4207 /* FIXME: We cannot simply error out here */ 4208 if (err) 4209 pci_err(pdev, "Unable to re-enable ports, trying to continue.\n"); 4210 pciserial_resume_ports(priv); 4211 } 4212 return 0; 4213 } 4214 #endif 4215 4216 static SIMPLE_DEV_PM_OPS(pciserial_pm_ops, pciserial_suspend_one, 4217 pciserial_resume_one); 4218 4219 static const struct pci_device_id serial_pci_tbl[] = { 4220 { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI1600, 4221 PCI_DEVICE_ID_ADVANTECH_PCI1600_1611, PCI_ANY_ID, 0, 0, 4222 pbn_b0_4_921600 }, 4223 /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */ 4224 { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620, 4225 PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0, 4226 pbn_b2_8_921600 }, 4227 /* Advantech also use 0x3618 and 0xf618 */ 4228 { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3618, 4229 PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0, 4230 pbn_b0_4_921600 }, 4231 { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCIf618, 4232 PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0, 4233 pbn_b0_4_921600 }, 4234 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, 4235 PCI_SUBVENDOR_ID_CONNECT_TECH, 4236 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, 4237 pbn_b1_8_1382400 }, 4238 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, 4239 PCI_SUBVENDOR_ID_CONNECT_TECH, 4240 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, 4241 pbn_b1_4_1382400 }, 4242 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, 4243 PCI_SUBVENDOR_ID_CONNECT_TECH, 4244 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, 4245 pbn_b1_2_1382400 }, 4246 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 4247 PCI_SUBVENDOR_ID_CONNECT_TECH, 4248 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, 4249 pbn_b1_8_1382400 }, 4250 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 4251 PCI_SUBVENDOR_ID_CONNECT_TECH, 4252 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, 4253 pbn_b1_4_1382400 }, 4254 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 4255 PCI_SUBVENDOR_ID_CONNECT_TECH, 4256 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, 4257 pbn_b1_2_1382400 }, 4258 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 4259 PCI_SUBVENDOR_ID_CONNECT_TECH, 4260 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0, 4261 pbn_b1_8_921600 }, 4262 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 4263 PCI_SUBVENDOR_ID_CONNECT_TECH, 4264 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0, 4265 pbn_b1_8_921600 }, 4266 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 4267 PCI_SUBVENDOR_ID_CONNECT_TECH, 4268 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0, 4269 pbn_b1_4_921600 }, 4270 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 4271 PCI_SUBVENDOR_ID_CONNECT_TECH, 4272 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0, 4273 pbn_b1_4_921600 }, 4274 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 4275 PCI_SUBVENDOR_ID_CONNECT_TECH, 4276 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0, 4277 pbn_b1_2_921600 }, 4278 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 4279 PCI_SUBVENDOR_ID_CONNECT_TECH, 4280 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0, 4281 pbn_b1_8_921600 }, 4282 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 4283 PCI_SUBVENDOR_ID_CONNECT_TECH, 4284 PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0, 4285 pbn_b1_8_921600 }, 4286 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 4287 PCI_SUBVENDOR_ID_CONNECT_TECH, 4288 PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0, 4289 pbn_b1_4_921600 }, 4290 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 4291 PCI_SUBVENDOR_ID_CONNECT_TECH, 4292 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0, 4293 pbn_b1_2_1250000 }, 4294 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, 4295 PCI_SUBVENDOR_ID_CONNECT_TECH, 4296 PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0, 4297 pbn_b0_2_1843200 }, 4298 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, 4299 PCI_SUBVENDOR_ID_CONNECT_TECH, 4300 PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0, 4301 pbn_b0_4_1843200 }, 4302 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, 4303 PCI_VENDOR_ID_AFAVLAB, 4304 PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0, 4305 pbn_b0_4_1152000 }, 4306 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, 4307 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4308 pbn_b2_bt_1_115200 }, 4309 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2, 4310 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4311 pbn_b2_bt_2_115200 }, 4312 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422, 4313 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4314 pbn_b2_bt_4_115200 }, 4315 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232, 4316 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4317 pbn_b2_bt_2_115200 }, 4318 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4, 4319 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4320 pbn_b2_bt_4_115200 }, 4321 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8, 4322 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4323 pbn_b2_8_115200 }, 4324 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803, 4325 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4326 pbn_b2_8_460800 }, 4327 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8, 4328 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4329 pbn_b2_8_115200 }, 4330 4331 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2, 4332 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4333 pbn_b2_bt_2_115200 }, 4334 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200, 4335 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4336 pbn_b2_bt_2_921600 }, 4337 /* 4338 * VScom SPCOM800, from sl@s.pl 4339 */ 4340 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, 4341 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4342 pbn_b2_8_921600 }, 4343 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077, 4344 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4345 pbn_b2_4_921600 }, 4346 /* Unknown card - subdevice 0x1584 */ 4347 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 4348 PCI_VENDOR_ID_PLX, 4349 PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0, 4350 pbn_b2_4_115200 }, 4351 /* Unknown card - subdevice 0x1588 */ 4352 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 4353 PCI_VENDOR_ID_PLX, 4354 PCI_SUBDEVICE_ID_UNKNOWN_0x1588, 0, 0, 4355 pbn_b2_8_115200 }, 4356 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 4357 PCI_SUBVENDOR_ID_KEYSPAN, 4358 PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0, 4359 pbn_panacom }, 4360 { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM, 4361 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4362 pbn_panacom4 }, 4363 { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM, 4364 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4365 pbn_panacom2 }, 4366 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, 4367 PCI_VENDOR_ID_ESDGMBH, 4368 PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0, 4369 pbn_b2_4_115200 }, 4370 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 4371 PCI_SUBVENDOR_ID_CHASE_PCIFAST, 4372 PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, 4373 pbn_b2_4_460800 }, 4374 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 4375 PCI_SUBVENDOR_ID_CHASE_PCIFAST, 4376 PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, 4377 pbn_b2_8_460800 }, 4378 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 4379 PCI_SUBVENDOR_ID_CHASE_PCIFAST, 4380 PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, 4381 pbn_b2_16_460800 }, 4382 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 4383 PCI_SUBVENDOR_ID_CHASE_PCIFAST, 4384 PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, 4385 pbn_b2_16_460800 }, 4386 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 4387 PCI_SUBVENDOR_ID_CHASE_PCIRAS, 4388 PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, 4389 pbn_b2_4_460800 }, 4390 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 4391 PCI_SUBVENDOR_ID_CHASE_PCIRAS, 4392 PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, 4393 pbn_b2_8_460800 }, 4394 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 4395 PCI_SUBVENDOR_ID_EXSYS, 4396 PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0, 4397 pbn_b2_4_115200 }, 4398 /* 4399 * Megawolf Romulus PCI Serial Card, from Mike Hudson 4400 * (Exoray@isys.ca) 4401 */ 4402 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS, 4403 0x10b5, 0x106a, 0, 0, 4404 pbn_plx_romulus }, 4405 /* 4406 * Quatech cards. These actually have configurable clocks but for 4407 * now we just use the default. 4408 * 4409 * 100 series are RS232, 200 series RS422, 4410 */ 4411 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100, 4412 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4413 pbn_b1_4_115200 }, 4414 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100, 4415 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4416 pbn_b1_2_115200 }, 4417 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100E, 4418 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4419 pbn_b2_2_115200 }, 4420 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200, 4421 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4422 pbn_b1_2_115200 }, 4423 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200E, 4424 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4425 pbn_b2_2_115200 }, 4426 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC200, 4427 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4428 pbn_b1_4_115200 }, 4429 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D, 4430 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4431 pbn_b1_8_115200 }, 4432 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M, 4433 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4434 pbn_b1_8_115200 }, 4435 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP100, 4436 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4437 pbn_b1_4_115200 }, 4438 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP100, 4439 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4440 pbn_b1_2_115200 }, 4441 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP200, 4442 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4443 pbn_b1_4_115200 }, 4444 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP200, 4445 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4446 pbn_b1_2_115200 }, 4447 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP100, 4448 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4449 pbn_b2_4_115200 }, 4450 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP100, 4451 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4452 pbn_b2_2_115200 }, 4453 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP100, 4454 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4455 pbn_b2_1_115200 }, 4456 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP200, 4457 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4458 pbn_b2_4_115200 }, 4459 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP200, 4460 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4461 pbn_b2_2_115200 }, 4462 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP200, 4463 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4464 pbn_b2_1_115200 }, 4465 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESCLP100, 4466 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4467 pbn_b0_8_115200 }, 4468 4469 { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954, 4470 PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 4471 0, 0, 4472 pbn_b0_4_921600 }, 4473 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, 4474 PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 4475 0, 0, 4476 pbn_b0_4_1152000 }, 4477 { PCI_VENDOR_ID_OXSEMI, 0x9505, 4478 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4479 pbn_b0_bt_2_921600 }, 4480 4481 /* 4482 * The below card is a little controversial since it is the 4483 * subject of a PCI vendor/device ID clash. (See 4484 * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html). 4485 * For now just used the hex ID 0x950a. 4486 */ 4487 { PCI_VENDOR_ID_OXSEMI, 0x950a, 4488 PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_00, 4489 0, 0, pbn_b0_2_115200 }, 4490 { PCI_VENDOR_ID_OXSEMI, 0x950a, 4491 PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_30, 4492 0, 0, pbn_b0_2_115200 }, 4493 { PCI_VENDOR_ID_OXSEMI, 0x950a, 4494 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4495 pbn_b0_2_1130000 }, 4496 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950, 4497 PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0, 4498 pbn_b0_1_921600 }, 4499 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, 4500 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4501 pbn_b0_4_115200 }, 4502 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952, 4503 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4504 pbn_b0_bt_2_921600 }, 4505 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958, 4506 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4507 pbn_b2_8_1152000 }, 4508 4509 /* 4510 * Oxford Semiconductor Inc. Tornado PCI express device range. 4511 */ 4512 { PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */ 4513 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4514 pbn_b0_1_15625000 }, 4515 { PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */ 4516 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4517 pbn_b0_1_15625000 }, 4518 { PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */ 4519 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4520 pbn_oxsemi_1_15625000 }, 4521 { PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */ 4522 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4523 pbn_oxsemi_1_15625000 }, 4524 { PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */ 4525 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4526 pbn_b0_1_15625000 }, 4527 { PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */ 4528 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4529 pbn_b0_1_15625000 }, 4530 { PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */ 4531 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4532 pbn_oxsemi_1_15625000 }, 4533 { PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */ 4534 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4535 pbn_oxsemi_1_15625000 }, 4536 { PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */ 4537 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4538 pbn_b0_1_15625000 }, 4539 { PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */ 4540 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4541 pbn_b0_1_15625000 }, 4542 { PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */ 4543 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4544 pbn_b0_1_15625000 }, 4545 { PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */ 4546 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4547 pbn_b0_1_15625000 }, 4548 { PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */ 4549 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4550 pbn_oxsemi_2_15625000 }, 4551 { PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */ 4552 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4553 pbn_oxsemi_2_15625000 }, 4554 { PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */ 4555 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4556 pbn_oxsemi_4_15625000 }, 4557 { PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */ 4558 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4559 pbn_oxsemi_4_15625000 }, 4560 { PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */ 4561 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4562 pbn_oxsemi_8_15625000 }, 4563 { PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */ 4564 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4565 pbn_oxsemi_8_15625000 }, 4566 { PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */ 4567 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4568 pbn_oxsemi_1_15625000 }, 4569 { PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */ 4570 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4571 pbn_oxsemi_1_15625000 }, 4572 { PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */ 4573 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4574 pbn_oxsemi_1_15625000 }, 4575 { PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */ 4576 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4577 pbn_oxsemi_1_15625000 }, 4578 { PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */ 4579 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4580 pbn_oxsemi_1_15625000 }, 4581 { PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */ 4582 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4583 pbn_oxsemi_1_15625000 }, 4584 { PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */ 4585 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4586 pbn_oxsemi_1_15625000 }, 4587 { PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */ 4588 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4589 pbn_oxsemi_1_15625000 }, 4590 { PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */ 4591 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4592 pbn_oxsemi_1_15625000 }, 4593 { PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */ 4594 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4595 pbn_oxsemi_1_15625000 }, 4596 { PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */ 4597 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4598 pbn_oxsemi_1_15625000 }, 4599 { PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */ 4600 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4601 pbn_oxsemi_1_15625000 }, 4602 { PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */ 4603 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4604 pbn_oxsemi_1_15625000 }, 4605 { PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */ 4606 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4607 pbn_oxsemi_1_15625000 }, 4608 { PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */ 4609 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4610 pbn_oxsemi_1_15625000 }, 4611 { PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */ 4612 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4613 pbn_oxsemi_1_15625000 }, 4614 { PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */ 4615 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4616 pbn_oxsemi_1_15625000 }, 4617 { PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */ 4618 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4619 pbn_oxsemi_1_15625000 }, 4620 { PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */ 4621 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4622 pbn_oxsemi_1_15625000 }, 4623 { PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */ 4624 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4625 pbn_oxsemi_1_15625000 }, 4626 { PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */ 4627 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4628 pbn_oxsemi_1_15625000 }, 4629 { PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */ 4630 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4631 pbn_oxsemi_1_15625000 }, 4632 { PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */ 4633 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4634 pbn_oxsemi_1_15625000 }, 4635 { PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */ 4636 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4637 pbn_oxsemi_1_15625000 }, 4638 { PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */ 4639 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4640 pbn_oxsemi_1_15625000 }, 4641 { PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */ 4642 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4643 pbn_oxsemi_1_15625000 }, 4644 /* 4645 * Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado 4646 */ 4647 { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */ 4648 PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0, 4649 pbn_oxsemi_1_15625000 }, 4650 { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */ 4651 PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0, 4652 pbn_oxsemi_2_15625000 }, 4653 { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */ 4654 PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0, 4655 pbn_oxsemi_4_15625000 }, 4656 { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */ 4657 PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0, 4658 pbn_oxsemi_8_15625000 }, 4659 4660 /* 4661 * Digi/IBM PCIe 2-port Async EIA-232 Adapter utilizing OxSemi Tornado 4662 */ 4663 { PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM, 4664 PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0, 4665 pbn_oxsemi_2_15625000 }, 4666 /* 4667 * EndRun Technologies. PCI express device range. 4668 * EndRun PTP/1588 has 2 Native UARTs utilizing OxSemi 952. 4669 */ 4670 { PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588, 4671 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4672 pbn_oxsemi_2_15625000 }, 4673 4674 /* 4675 * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards, 4676 * from skokodyn@yahoo.com 4677 */ 4678 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, 4679 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0, 4680 pbn_sbsxrsio }, 4681 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, 4682 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0, 4683 pbn_sbsxrsio }, 4684 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, 4685 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0, 4686 pbn_sbsxrsio }, 4687 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, 4688 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0, 4689 pbn_sbsxrsio }, 4690 4691 /* 4692 * Digitan DS560-558, from jimd@esoft.com 4693 */ 4694 { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM, 4695 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4696 pbn_b1_1_115200 }, 4697 4698 /* 4699 * Titan Electronic cards 4700 * The 400L and 800L have a custom setup quirk. 4701 */ 4702 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100, 4703 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4704 pbn_b0_1_921600 }, 4705 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200, 4706 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4707 pbn_b0_2_921600 }, 4708 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400, 4709 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4710 pbn_b0_4_921600 }, 4711 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B, 4712 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4713 pbn_b0_4_921600 }, 4714 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L, 4715 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4716 pbn_b1_1_921600 }, 4717 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L, 4718 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4719 pbn_b1_bt_2_921600 }, 4720 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L, 4721 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4722 pbn_b0_bt_4_921600 }, 4723 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L, 4724 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4725 pbn_b0_bt_8_921600 }, 4726 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I, 4727 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4728 pbn_b4_bt_2_921600 }, 4729 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I, 4730 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4731 pbn_b4_bt_4_921600 }, 4732 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I, 4733 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4734 pbn_b4_bt_8_921600 }, 4735 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH, 4736 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4737 pbn_b0_4_921600 }, 4738 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH, 4739 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4740 pbn_b0_4_921600 }, 4741 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB, 4742 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4743 pbn_b0_4_921600 }, 4744 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E, 4745 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4746 pbn_titan_1_4000000 }, 4747 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E, 4748 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4749 pbn_titan_2_4000000 }, 4750 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E, 4751 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4752 pbn_titan_4_4000000 }, 4753 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E, 4754 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4755 pbn_titan_8_4000000 }, 4756 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI, 4757 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4758 pbn_titan_2_4000000 }, 4759 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI, 4760 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4761 pbn_titan_2_4000000 }, 4762 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200V3, 4763 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4764 pbn_b0_bt_2_921600 }, 4765 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400V3, 4766 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4767 pbn_b0_4_921600 }, 4768 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_410V3, 4769 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4770 pbn_b0_4_921600 }, 4771 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3, 4772 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4773 pbn_b0_4_921600 }, 4774 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3B, 4775 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4776 pbn_b0_4_921600 }, 4777 4778 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550, 4779 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4780 pbn_b2_1_460800 }, 4781 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650, 4782 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4783 pbn_b2_1_460800 }, 4784 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850, 4785 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4786 pbn_b2_1_460800 }, 4787 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550, 4788 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4789 pbn_b2_bt_2_921600 }, 4790 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650, 4791 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4792 pbn_b2_bt_2_921600 }, 4793 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850, 4794 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4795 pbn_b2_bt_2_921600 }, 4796 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550, 4797 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4798 pbn_b2_bt_4_921600 }, 4799 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650, 4800 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4801 pbn_b2_bt_4_921600 }, 4802 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850, 4803 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4804 pbn_b2_bt_4_921600 }, 4805 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550, 4806 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4807 pbn_b0_1_921600 }, 4808 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650, 4809 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4810 pbn_b0_1_921600 }, 4811 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850, 4812 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4813 pbn_b0_1_921600 }, 4814 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550, 4815 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4816 pbn_b0_bt_2_921600 }, 4817 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650, 4818 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4819 pbn_b0_bt_2_921600 }, 4820 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850, 4821 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4822 pbn_b0_bt_2_921600 }, 4823 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550, 4824 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4825 pbn_b0_bt_4_921600 }, 4826 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650, 4827 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4828 pbn_b0_bt_4_921600 }, 4829 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850, 4830 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4831 pbn_b0_bt_4_921600 }, 4832 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550, 4833 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4834 pbn_b0_bt_8_921600 }, 4835 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650, 4836 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4837 pbn_b0_bt_8_921600 }, 4838 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850, 4839 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4840 pbn_b0_bt_8_921600 }, 4841 4842 /* 4843 * Computone devices submitted by Doug McNash dmcnash@computone.com 4844 */ 4845 { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, 4846 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4, 4847 0, 0, pbn_computone_4 }, 4848 { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, 4849 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8, 4850 0, 0, pbn_computone_8 }, 4851 { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, 4852 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6, 4853 0, 0, pbn_computone_6 }, 4854 4855 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N, 4856 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4857 pbn_oxsemi }, 4858 { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889, 4859 PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0, 4860 pbn_b0_bt_1_921600 }, 4861 4862 /* 4863 * Sunix PCI serial boards 4864 */ 4865 { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, 4866 PCI_VENDOR_ID_SUNIX, 0x0001, 0, 0, 4867 pbn_sunix_pci_1s }, 4868 { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, 4869 PCI_VENDOR_ID_SUNIX, 0x0002, 0, 0, 4870 pbn_sunix_pci_2s }, 4871 { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, 4872 PCI_VENDOR_ID_SUNIX, 0x0004, 0, 0, 4873 pbn_sunix_pci_4s }, 4874 { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, 4875 PCI_VENDOR_ID_SUNIX, 0x0084, 0, 0, 4876 pbn_sunix_pci_4s }, 4877 { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, 4878 PCI_VENDOR_ID_SUNIX, 0x0008, 0, 0, 4879 pbn_sunix_pci_8s }, 4880 { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, 4881 PCI_VENDOR_ID_SUNIX, 0x0088, 0, 0, 4882 pbn_sunix_pci_8s }, 4883 { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, 4884 PCI_VENDOR_ID_SUNIX, 0x0010, 0, 0, 4885 pbn_sunix_pci_16s }, 4886 4887 /* 4888 * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org> 4889 */ 4890 { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028, 4891 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4892 pbn_b0_bt_8_115200 }, 4893 { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030, 4894 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4895 pbn_b0_bt_8_115200 }, 4896 4897 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL, 4898 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4899 pbn_b0_bt_2_115200 }, 4900 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A, 4901 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4902 pbn_b0_bt_2_115200 }, 4903 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, 4904 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4905 pbn_b0_bt_2_115200 }, 4906 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A, 4907 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4908 pbn_b0_bt_2_115200 }, 4909 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B, 4910 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4911 pbn_b0_bt_2_115200 }, 4912 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, 4913 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4914 pbn_b0_bt_4_460800 }, 4915 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B, 4916 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4917 pbn_b0_bt_4_460800 }, 4918 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS, 4919 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4920 pbn_b0_bt_2_460800 }, 4921 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A, 4922 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4923 pbn_b0_bt_2_460800 }, 4924 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B, 4925 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4926 pbn_b0_bt_2_460800 }, 4927 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL, 4928 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4929 pbn_b0_bt_1_115200 }, 4930 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650, 4931 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4932 pbn_b0_bt_1_460800 }, 4933 4934 /* 4935 * Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408). 4936 * Cards are identified by their subsystem vendor IDs, which 4937 * (in hex) match the model number. 4938 * 4939 * Note that JC140x are RS422/485 cards which require ox950 4940 * ACR = 0x10, and as such are not currently fully supported. 4941 */ 4942 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, 4943 0x1204, 0x0004, 0, 0, 4944 pbn_b0_4_921600 }, 4945 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, 4946 0x1208, 0x0004, 0, 0, 4947 pbn_b0_4_921600 }, 4948 /* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, 4949 0x1402, 0x0002, 0, 0, 4950 pbn_b0_2_921600 }, */ 4951 /* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, 4952 0x1404, 0x0004, 0, 0, 4953 pbn_b0_4_921600 }, */ 4954 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1, 4955 0x1208, 0x0004, 0, 0, 4956 pbn_b0_4_921600 }, 4957 4958 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, 4959 0x1204, 0x0004, 0, 0, 4960 pbn_b0_4_921600 }, 4961 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, 4962 0x1208, 0x0004, 0, 0, 4963 pbn_b0_4_921600 }, 4964 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF3, 4965 0x1208, 0x0004, 0, 0, 4966 pbn_b0_4_921600 }, 4967 /* 4968 * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com 4969 */ 4970 { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4, 4971 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4972 pbn_b1_1_1382400 }, 4973 4974 /* 4975 * Dell Remote Access Card III - Tim_T_Murphy@Dell.com 4976 */ 4977 { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII, 4978 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4979 pbn_b1_1_1382400 }, 4980 4981 /* 4982 * RAStel 2 port modem, gerg@moreton.com.au 4983 */ 4984 { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT, 4985 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4986 pbn_b2_bt_2_115200 }, 4987 4988 /* 4989 * EKF addition for i960 Boards form EKF with serial port 4990 */ 4991 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP, 4992 0xE4BF, PCI_ANY_ID, 0, 0, 4993 pbn_intel_i960 }, 4994 4995 /* 4996 * Xircom Cardbus/Ethernet combos 4997 */ 4998 { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM, 4999 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5000 pbn_b0_1_115200 }, 5001 /* 5002 * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry) 5003 */ 5004 { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G, 5005 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5006 pbn_b0_1_115200 }, 5007 5008 /* 5009 * Untested PCI modems, sent in from various folks... 5010 */ 5011 5012 /* 5013 * Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de> 5014 */ 5015 { PCI_VENDOR_ID_ROCKWELL, 0x1004, 5016 0x1048, 0x1500, 0, 0, 5017 pbn_b1_1_115200 }, 5018 5019 { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, 5020 0xFF00, 0, 0, 0, 5021 pbn_sgi_ioc3 }, 5022 5023 /* 5024 * HP Diva card 5025 */ 5026 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, 5027 PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0, 5028 pbn_b1_1_115200 }, 5029 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, 5030 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5031 pbn_b0_5_115200 }, 5032 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX, 5033 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5034 pbn_b2_1_115200 }, 5035 /* HPE PCI serial device */ 5036 { PCI_VENDOR_ID_HP_3PAR, PCI_DEVICE_ID_HPE_PCI_SERIAL, 5037 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5038 pbn_b1_1_115200 }, 5039 5040 { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2, 5041 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5042 pbn_b3_2_115200 }, 5043 { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4, 5044 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5045 pbn_b3_4_115200 }, 5046 { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8, 5047 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5048 pbn_b3_8_115200 }, 5049 /* 5050 * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke) 5051 */ 5052 { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560, 5053 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5054 pbn_b0_1_115200 }, 5055 /* 5056 * ITE 5057 */ 5058 { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872, 5059 PCI_ANY_ID, PCI_ANY_ID, 5060 0, 0, 5061 pbn_b1_bt_1_115200 }, 5062 5063 /* 5064 * IntaShield IS-100 5065 */ 5066 { PCI_VENDOR_ID_INTASHIELD, 0x0D60, 5067 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5068 pbn_b2_1_115200 }, 5069 /* 5070 * IntaShield IS-200 5071 */ 5072 { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200, 5073 PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */ 5074 pbn_b2_2_115200 }, 5075 /* 5076 * IntaShield IS-400 5077 */ 5078 { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400, 5079 PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */ 5080 pbn_b2_4_115200 }, 5081 /* 5082 * IntaShield IX-100 5083 */ 5084 { PCI_VENDOR_ID_INTASHIELD, 0x4027, 5085 PCI_ANY_ID, PCI_ANY_ID, 5086 0, 0, 5087 pbn_oxsemi_1_15625000 }, 5088 /* 5089 * IntaShield IX-200 5090 */ 5091 { PCI_VENDOR_ID_INTASHIELD, 0x4028, 5092 PCI_ANY_ID, PCI_ANY_ID, 5093 0, 0, 5094 pbn_oxsemi_2_15625000 }, 5095 /* 5096 * IntaShield IX-400 5097 */ 5098 { PCI_VENDOR_ID_INTASHIELD, 0x4029, 5099 PCI_ANY_ID, PCI_ANY_ID, 5100 0, 0, 5101 pbn_oxsemi_4_15625000 }, 5102 /* Brainboxes Devices */ 5103 /* 5104 * Brainboxes UC-101 5105 */ 5106 { PCI_VENDOR_ID_INTASHIELD, 0x0BA1, 5107 PCI_ANY_ID, PCI_ANY_ID, 5108 0, 0, 5109 pbn_b2_2_115200 }, 5110 /* 5111 * Brainboxes UC-235/246 5112 */ 5113 { PCI_VENDOR_ID_INTASHIELD, 0x0AA1, 5114 PCI_ANY_ID, PCI_ANY_ID, 5115 0, 0, 5116 pbn_b2_1_115200 }, 5117 { PCI_VENDOR_ID_INTASHIELD, 0x0AA2, 5118 PCI_ANY_ID, PCI_ANY_ID, 5119 0, 0, 5120 pbn_b2_1_115200 }, 5121 /* 5122 * Brainboxes UC-253/UC-734 5123 */ 5124 { PCI_VENDOR_ID_INTASHIELD, 0x0CA1, 5125 PCI_ANY_ID, PCI_ANY_ID, 5126 0, 0, 5127 pbn_b2_2_115200 }, 5128 /* 5129 * Brainboxes UC-260/271/701/756 5130 */ 5131 { PCI_VENDOR_ID_INTASHIELD, 0x0D21, 5132 PCI_ANY_ID, PCI_ANY_ID, 5133 PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, 5134 pbn_b2_4_115200 }, 5135 { PCI_VENDOR_ID_INTASHIELD, 0x0E34, 5136 PCI_ANY_ID, PCI_ANY_ID, 5137 PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, 5138 pbn_b2_4_115200 }, 5139 /* 5140 * Brainboxes UC-268 5141 */ 5142 { PCI_VENDOR_ID_INTASHIELD, 0x0841, 5143 PCI_ANY_ID, PCI_ANY_ID, 5144 0, 0, 5145 pbn_b2_4_115200 }, 5146 /* 5147 * Brainboxes UC-275/279 5148 */ 5149 { PCI_VENDOR_ID_INTASHIELD, 0x0881, 5150 PCI_ANY_ID, PCI_ANY_ID, 5151 0, 0, 5152 pbn_b2_8_115200 }, 5153 /* 5154 * Brainboxes UC-302 5155 */ 5156 { PCI_VENDOR_ID_INTASHIELD, 0x08E1, 5157 PCI_ANY_ID, PCI_ANY_ID, 5158 0, 0, 5159 pbn_b2_2_115200 }, 5160 { PCI_VENDOR_ID_INTASHIELD, 0x08E2, 5161 PCI_ANY_ID, PCI_ANY_ID, 5162 0, 0, 5163 pbn_b2_2_115200 }, 5164 { PCI_VENDOR_ID_INTASHIELD, 0x08E3, 5165 PCI_ANY_ID, PCI_ANY_ID, 5166 0, 0, 5167 pbn_b2_2_115200 }, 5168 /* 5169 * Brainboxes UC-310 5170 */ 5171 { PCI_VENDOR_ID_INTASHIELD, 0x08C1, 5172 PCI_ANY_ID, PCI_ANY_ID, 5173 0, 0, 5174 pbn_b2_2_115200 }, 5175 /* 5176 * Brainboxes UC-313 5177 */ 5178 { PCI_VENDOR_ID_INTASHIELD, 0x08A1, 5179 PCI_ANY_ID, PCI_ANY_ID, 5180 0, 0, 5181 pbn_b2_2_115200 }, 5182 { PCI_VENDOR_ID_INTASHIELD, 0x08A2, 5183 PCI_ANY_ID, PCI_ANY_ID, 5184 0, 0, 5185 pbn_b2_2_115200 }, 5186 { PCI_VENDOR_ID_INTASHIELD, 0x08A3, 5187 PCI_ANY_ID, PCI_ANY_ID, 5188 0, 0, 5189 pbn_b2_2_115200 }, 5190 /* 5191 * Brainboxes UC-320/324 5192 */ 5193 { PCI_VENDOR_ID_INTASHIELD, 0x0A61, 5194 PCI_ANY_ID, PCI_ANY_ID, 5195 0, 0, 5196 pbn_b2_1_115200 }, 5197 /* 5198 * Brainboxes UC-346 5199 */ 5200 { PCI_VENDOR_ID_INTASHIELD, 0x0B01, 5201 PCI_ANY_ID, PCI_ANY_ID, 5202 0, 0, 5203 pbn_b2_4_115200 }, 5204 { PCI_VENDOR_ID_INTASHIELD, 0x0B02, 5205 PCI_ANY_ID, PCI_ANY_ID, 5206 0, 0, 5207 pbn_b2_4_115200 }, 5208 /* 5209 * Brainboxes UC-357 5210 */ 5211 { PCI_VENDOR_ID_INTASHIELD, 0x0A81, 5212 PCI_ANY_ID, PCI_ANY_ID, 5213 0, 0, 5214 pbn_b2_2_115200 }, 5215 { PCI_VENDOR_ID_INTASHIELD, 0x0A82, 5216 PCI_ANY_ID, PCI_ANY_ID, 5217 0, 0, 5218 pbn_b2_2_115200 }, 5219 { PCI_VENDOR_ID_INTASHIELD, 0x0A83, 5220 PCI_ANY_ID, PCI_ANY_ID, 5221 0, 0, 5222 pbn_b2_2_115200 }, 5223 /* 5224 * Brainboxes UC-368 5225 */ 5226 { PCI_VENDOR_ID_INTASHIELD, 0x0C41, 5227 PCI_ANY_ID, PCI_ANY_ID, 5228 0, 0, 5229 pbn_b2_4_115200 }, 5230 /* 5231 * Brainboxes UC-420 5232 */ 5233 { PCI_VENDOR_ID_INTASHIELD, 0x0921, 5234 PCI_ANY_ID, PCI_ANY_ID, 5235 0, 0, 5236 pbn_b2_4_115200 }, 5237 /* 5238 * Brainboxes UC-607 5239 */ 5240 { PCI_VENDOR_ID_INTASHIELD, 0x09A1, 5241 PCI_ANY_ID, PCI_ANY_ID, 5242 0, 0, 5243 pbn_b2_2_115200 }, 5244 { PCI_VENDOR_ID_INTASHIELD, 0x09A2, 5245 PCI_ANY_ID, PCI_ANY_ID, 5246 0, 0, 5247 pbn_b2_2_115200 }, 5248 { PCI_VENDOR_ID_INTASHIELD, 0x09A3, 5249 PCI_ANY_ID, PCI_ANY_ID, 5250 0, 0, 5251 pbn_b2_2_115200 }, 5252 /* 5253 * Brainboxes UC-836 5254 */ 5255 { PCI_VENDOR_ID_INTASHIELD, 0x0D41, 5256 PCI_ANY_ID, PCI_ANY_ID, 5257 0, 0, 5258 pbn_b2_4_115200 }, 5259 /* 5260 * Brainboxes UP-189 5261 */ 5262 { PCI_VENDOR_ID_INTASHIELD, 0x0AC1, 5263 PCI_ANY_ID, PCI_ANY_ID, 5264 0, 0, 5265 pbn_b2_2_115200 }, 5266 { PCI_VENDOR_ID_INTASHIELD, 0x0AC2, 5267 PCI_ANY_ID, PCI_ANY_ID, 5268 0, 0, 5269 pbn_b2_2_115200 }, 5270 { PCI_VENDOR_ID_INTASHIELD, 0x0AC3, 5271 PCI_ANY_ID, PCI_ANY_ID, 5272 0, 0, 5273 pbn_b2_2_115200 }, 5274 /* 5275 * Brainboxes UP-200 5276 */ 5277 { PCI_VENDOR_ID_INTASHIELD, 0x0B21, 5278 PCI_ANY_ID, PCI_ANY_ID, 5279 0, 0, 5280 pbn_b2_2_115200 }, 5281 { PCI_VENDOR_ID_INTASHIELD, 0x0B22, 5282 PCI_ANY_ID, PCI_ANY_ID, 5283 0, 0, 5284 pbn_b2_2_115200 }, 5285 { PCI_VENDOR_ID_INTASHIELD, 0x0B23, 5286 PCI_ANY_ID, PCI_ANY_ID, 5287 0, 0, 5288 pbn_b2_2_115200 }, 5289 /* 5290 * Brainboxes UP-869 5291 */ 5292 { PCI_VENDOR_ID_INTASHIELD, 0x0C01, 5293 PCI_ANY_ID, PCI_ANY_ID, 5294 0, 0, 5295 pbn_b2_2_115200 }, 5296 { PCI_VENDOR_ID_INTASHIELD, 0x0C02, 5297 PCI_ANY_ID, PCI_ANY_ID, 5298 0, 0, 5299 pbn_b2_2_115200 }, 5300 { PCI_VENDOR_ID_INTASHIELD, 0x0C03, 5301 PCI_ANY_ID, PCI_ANY_ID, 5302 0, 0, 5303 pbn_b2_2_115200 }, 5304 /* 5305 * Brainboxes UP-880 5306 */ 5307 { PCI_VENDOR_ID_INTASHIELD, 0x0C21, 5308 PCI_ANY_ID, PCI_ANY_ID, 5309 0, 0, 5310 pbn_b2_2_115200 }, 5311 { PCI_VENDOR_ID_INTASHIELD, 0x0C22, 5312 PCI_ANY_ID, PCI_ANY_ID, 5313 0, 0, 5314 pbn_b2_2_115200 }, 5315 { PCI_VENDOR_ID_INTASHIELD, 0x0C23, 5316 PCI_ANY_ID, PCI_ANY_ID, 5317 0, 0, 5318 pbn_b2_2_115200 }, 5319 /* 5320 * Brainboxes PX-101 5321 */ 5322 { PCI_VENDOR_ID_INTASHIELD, 0x4005, 5323 PCI_ANY_ID, PCI_ANY_ID, 5324 0, 0, 5325 pbn_b0_2_115200 }, 5326 { PCI_VENDOR_ID_INTASHIELD, 0x4019, 5327 PCI_ANY_ID, PCI_ANY_ID, 5328 0, 0, 5329 pbn_oxsemi_2_15625000 }, 5330 /* 5331 * Brainboxes PX-235/246 5332 */ 5333 { PCI_VENDOR_ID_INTASHIELD, 0x4004, 5334 PCI_ANY_ID, PCI_ANY_ID, 5335 0, 0, 5336 pbn_b0_1_115200 }, 5337 { PCI_VENDOR_ID_INTASHIELD, 0x4016, 5338 PCI_ANY_ID, PCI_ANY_ID, 5339 0, 0, 5340 pbn_oxsemi_1_15625000 }, 5341 /* 5342 * Brainboxes PX-203/PX-257 5343 */ 5344 { PCI_VENDOR_ID_INTASHIELD, 0x4006, 5345 PCI_ANY_ID, PCI_ANY_ID, 5346 0, 0, 5347 pbn_b0_2_115200 }, 5348 { PCI_VENDOR_ID_INTASHIELD, 0x4015, 5349 PCI_ANY_ID, PCI_ANY_ID, 5350 0, 0, 5351 pbn_oxsemi_2_15625000 }, 5352 /* 5353 * Brainboxes PX-260/PX-701 5354 */ 5355 { PCI_VENDOR_ID_INTASHIELD, 0x400A, 5356 PCI_ANY_ID, PCI_ANY_ID, 5357 0, 0, 5358 pbn_oxsemi_4_15625000 }, 5359 /* 5360 * Brainboxes PX-275/279 5361 */ 5362 { PCI_VENDOR_ID_INTASHIELD, 0x0E41, 5363 PCI_ANY_ID, PCI_ANY_ID, 5364 0, 0, 5365 pbn_b2_8_115200 }, 5366 /* 5367 * Brainboxes PX-310 5368 */ 5369 { PCI_VENDOR_ID_INTASHIELD, 0x400E, 5370 PCI_ANY_ID, PCI_ANY_ID, 5371 0, 0, 5372 pbn_oxsemi_2_15625000 }, 5373 /* 5374 * Brainboxes PX-313 5375 */ 5376 { PCI_VENDOR_ID_INTASHIELD, 0x400C, 5377 PCI_ANY_ID, PCI_ANY_ID, 5378 0, 0, 5379 pbn_oxsemi_2_15625000 }, 5380 /* 5381 * Brainboxes PX-320/324/PX-376/PX-387 5382 */ 5383 { PCI_VENDOR_ID_INTASHIELD, 0x400B, 5384 PCI_ANY_ID, PCI_ANY_ID, 5385 0, 0, 5386 pbn_oxsemi_1_15625000 }, 5387 /* 5388 * Brainboxes PX-335/346 5389 */ 5390 { PCI_VENDOR_ID_INTASHIELD, 0x400F, 5391 PCI_ANY_ID, PCI_ANY_ID, 5392 0, 0, 5393 pbn_oxsemi_4_15625000 }, 5394 /* 5395 * Brainboxes PX-368 5396 */ 5397 { PCI_VENDOR_ID_INTASHIELD, 0x4010, 5398 PCI_ANY_ID, PCI_ANY_ID, 5399 0, 0, 5400 pbn_oxsemi_4_15625000 }, 5401 /* 5402 * Brainboxes PX-420 5403 */ 5404 { PCI_VENDOR_ID_INTASHIELD, 0x4000, 5405 PCI_ANY_ID, PCI_ANY_ID, 5406 0, 0, 5407 pbn_b0_4_115200 }, 5408 { PCI_VENDOR_ID_INTASHIELD, 0x4011, 5409 PCI_ANY_ID, PCI_ANY_ID, 5410 0, 0, 5411 pbn_oxsemi_4_15625000 }, 5412 /* 5413 * Brainboxes PX-475 5414 */ 5415 { PCI_VENDOR_ID_INTASHIELD, 0x401D, 5416 PCI_ANY_ID, PCI_ANY_ID, 5417 0, 0, 5418 pbn_oxsemi_1_15625000 }, 5419 /* 5420 * Brainboxes PX-803/PX-857 5421 */ 5422 { PCI_VENDOR_ID_INTASHIELD, 0x4009, 5423 PCI_ANY_ID, PCI_ANY_ID, 5424 0, 0, 5425 pbn_b0_2_115200 }, 5426 { PCI_VENDOR_ID_INTASHIELD, 0x4018, 5427 PCI_ANY_ID, PCI_ANY_ID, 5428 0, 0, 5429 pbn_oxsemi_2_15625000 }, 5430 { PCI_VENDOR_ID_INTASHIELD, 0x401E, 5431 PCI_ANY_ID, PCI_ANY_ID, 5432 0, 0, 5433 pbn_oxsemi_2_15625000 }, 5434 /* 5435 * Brainboxes PX-820 5436 */ 5437 { PCI_VENDOR_ID_INTASHIELD, 0x4002, 5438 PCI_ANY_ID, PCI_ANY_ID, 5439 0, 0, 5440 pbn_b0_4_115200 }, 5441 { PCI_VENDOR_ID_INTASHIELD, 0x4013, 5442 PCI_ANY_ID, PCI_ANY_ID, 5443 0, 0, 5444 pbn_oxsemi_4_15625000 }, 5445 /* 5446 * Brainboxes PX-846 5447 */ 5448 { PCI_VENDOR_ID_INTASHIELD, 0x4008, 5449 PCI_ANY_ID, PCI_ANY_ID, 5450 0, 0, 5451 pbn_b0_1_115200 }, 5452 { PCI_VENDOR_ID_INTASHIELD, 0x4017, 5453 PCI_ANY_ID, PCI_ANY_ID, 5454 0, 0, 5455 pbn_oxsemi_1_15625000 }, 5456 5457 /* 5458 * Perle PCI-RAS cards 5459 */ 5460 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, 5461 PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4, 5462 0, 0, pbn_b2_4_921600 }, 5463 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, 5464 PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8, 5465 0, 0, pbn_b2_8_921600 }, 5466 5467 /* 5468 * Mainpine series cards: Fairly standard layout but fools 5469 * parts of the autodetect in some cases and uses otherwise 5470 * unmatched communications subclasses in the PCI Express case 5471 */ 5472 5473 { /* RockForceDUO */ 5474 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5475 PCI_VENDOR_ID_MAINPINE, 0x0200, 5476 0, 0, pbn_b0_2_115200 }, 5477 { /* RockForceQUATRO */ 5478 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5479 PCI_VENDOR_ID_MAINPINE, 0x0300, 5480 0, 0, pbn_b0_4_115200 }, 5481 { /* RockForceDUO+ */ 5482 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5483 PCI_VENDOR_ID_MAINPINE, 0x0400, 5484 0, 0, pbn_b0_2_115200 }, 5485 { /* RockForceQUATRO+ */ 5486 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5487 PCI_VENDOR_ID_MAINPINE, 0x0500, 5488 0, 0, pbn_b0_4_115200 }, 5489 { /* RockForce+ */ 5490 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5491 PCI_VENDOR_ID_MAINPINE, 0x0600, 5492 0, 0, pbn_b0_2_115200 }, 5493 { /* RockForce+ */ 5494 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5495 PCI_VENDOR_ID_MAINPINE, 0x0700, 5496 0, 0, pbn_b0_4_115200 }, 5497 { /* RockForceOCTO+ */ 5498 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5499 PCI_VENDOR_ID_MAINPINE, 0x0800, 5500 0, 0, pbn_b0_8_115200 }, 5501 { /* RockForceDUO+ */ 5502 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5503 PCI_VENDOR_ID_MAINPINE, 0x0C00, 5504 0, 0, pbn_b0_2_115200 }, 5505 { /* RockForceQUARTRO+ */ 5506 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5507 PCI_VENDOR_ID_MAINPINE, 0x0D00, 5508 0, 0, pbn_b0_4_115200 }, 5509 { /* RockForceOCTO+ */ 5510 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5511 PCI_VENDOR_ID_MAINPINE, 0x1D00, 5512 0, 0, pbn_b0_8_115200 }, 5513 { /* RockForceD1 */ 5514 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5515 PCI_VENDOR_ID_MAINPINE, 0x2000, 5516 0, 0, pbn_b0_1_115200 }, 5517 { /* RockForceF1 */ 5518 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5519 PCI_VENDOR_ID_MAINPINE, 0x2100, 5520 0, 0, pbn_b0_1_115200 }, 5521 { /* RockForceD2 */ 5522 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5523 PCI_VENDOR_ID_MAINPINE, 0x2200, 5524 0, 0, pbn_b0_2_115200 }, 5525 { /* RockForceF2 */ 5526 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5527 PCI_VENDOR_ID_MAINPINE, 0x2300, 5528 0, 0, pbn_b0_2_115200 }, 5529 { /* RockForceD4 */ 5530 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5531 PCI_VENDOR_ID_MAINPINE, 0x2400, 5532 0, 0, pbn_b0_4_115200 }, 5533 { /* RockForceF4 */ 5534 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5535 PCI_VENDOR_ID_MAINPINE, 0x2500, 5536 0, 0, pbn_b0_4_115200 }, 5537 { /* RockForceD8 */ 5538 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5539 PCI_VENDOR_ID_MAINPINE, 0x2600, 5540 0, 0, pbn_b0_8_115200 }, 5541 { /* RockForceF8 */ 5542 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5543 PCI_VENDOR_ID_MAINPINE, 0x2700, 5544 0, 0, pbn_b0_8_115200 }, 5545 { /* IQ Express D1 */ 5546 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5547 PCI_VENDOR_ID_MAINPINE, 0x3000, 5548 0, 0, pbn_b0_1_115200 }, 5549 { /* IQ Express F1 */ 5550 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5551 PCI_VENDOR_ID_MAINPINE, 0x3100, 5552 0, 0, pbn_b0_1_115200 }, 5553 { /* IQ Express D2 */ 5554 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5555 PCI_VENDOR_ID_MAINPINE, 0x3200, 5556 0, 0, pbn_b0_2_115200 }, 5557 { /* IQ Express F2 */ 5558 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5559 PCI_VENDOR_ID_MAINPINE, 0x3300, 5560 0, 0, pbn_b0_2_115200 }, 5561 { /* IQ Express D4 */ 5562 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5563 PCI_VENDOR_ID_MAINPINE, 0x3400, 5564 0, 0, pbn_b0_4_115200 }, 5565 { /* IQ Express F4 */ 5566 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5567 PCI_VENDOR_ID_MAINPINE, 0x3500, 5568 0, 0, pbn_b0_4_115200 }, 5569 { /* IQ Express D8 */ 5570 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5571 PCI_VENDOR_ID_MAINPINE, 0x3C00, 5572 0, 0, pbn_b0_8_115200 }, 5573 { /* IQ Express F8 */ 5574 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 5575 PCI_VENDOR_ID_MAINPINE, 0x3D00, 5576 0, 0, pbn_b0_8_115200 }, 5577 5578 5579 /* 5580 * PA Semi PA6T-1682M on-chip UART 5581 */ 5582 { PCI_VENDOR_ID_PASEMI, 0xa004, 5583 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5584 pbn_pasemi_1682M }, 5585 5586 /* 5587 * National Instruments 5588 */ 5589 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI23216, 5590 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5591 pbn_b1_16_115200 }, 5592 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2328, 5593 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5594 pbn_b1_8_115200 }, 5595 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324, 5596 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5597 pbn_b1_bt_4_115200 }, 5598 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322, 5599 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5600 pbn_b1_bt_2_115200 }, 5601 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324I, 5602 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5603 pbn_b1_bt_4_115200 }, 5604 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322I, 5605 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5606 pbn_b1_bt_2_115200 }, 5607 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_23216, 5608 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5609 pbn_b1_16_115200 }, 5610 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2328, 5611 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5612 pbn_b1_8_115200 }, 5613 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2324, 5614 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5615 pbn_b1_bt_4_115200 }, 5616 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2322, 5617 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5618 pbn_b1_bt_2_115200 }, 5619 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2324, 5620 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5621 pbn_b1_bt_4_115200 }, 5622 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2322, 5623 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5624 pbn_b1_bt_2_115200 }, 5625 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2322, 5626 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5627 pbn_ni8430_2 }, 5628 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2322, 5629 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5630 pbn_ni8430_2 }, 5631 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2324, 5632 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5633 pbn_ni8430_4 }, 5634 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2324, 5635 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5636 pbn_ni8430_4 }, 5637 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2328, 5638 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5639 pbn_ni8430_8 }, 5640 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2328, 5641 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5642 pbn_ni8430_8 }, 5643 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_23216, 5644 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5645 pbn_ni8430_16 }, 5646 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_23216, 5647 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5648 pbn_ni8430_16 }, 5649 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2322, 5650 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5651 pbn_ni8430_2 }, 5652 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2322, 5653 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5654 pbn_ni8430_2 }, 5655 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2324, 5656 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5657 pbn_ni8430_4 }, 5658 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324, 5659 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5660 pbn_ni8430_4 }, 5661 5662 /* 5663 * MOXA 5664 */ 5665 { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102E, 5666 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5667 pbn_moxa8250_2p }, 5668 { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102EL, 5669 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5670 pbn_moxa8250_2p }, 5671 { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104EL_A, 5672 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5673 pbn_moxa8250_4p }, 5674 { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP114EL, 5675 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5676 pbn_moxa8250_4p }, 5677 { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP116E_A_A, 5678 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5679 pbn_moxa8250_8p }, 5680 { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP116E_A_B, 5681 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5682 pbn_moxa8250_8p }, 5683 { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP118EL_A, 5684 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5685 pbn_moxa8250_8p }, 5686 { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP118E_A_I, 5687 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5688 pbn_moxa8250_8p }, 5689 { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132EL, 5690 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5691 pbn_moxa8250_2p }, 5692 { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP134EL_A, 5693 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5694 pbn_moxa8250_4p }, 5695 { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP138E_A, 5696 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5697 pbn_moxa8250_8p }, 5698 { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP168EL_A, 5699 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5700 pbn_moxa8250_8p }, 5701 5702 /* 5703 * ADDI-DATA GmbH communication cards <info@addi-data.com> 5704 */ 5705 { PCI_VENDOR_ID_ADDIDATA, 5706 PCI_DEVICE_ID_ADDIDATA_APCI7500, 5707 PCI_ANY_ID, 5708 PCI_ANY_ID, 5709 0, 5710 0, 5711 pbn_b0_4_115200 }, 5712 5713 { PCI_VENDOR_ID_ADDIDATA, 5714 PCI_DEVICE_ID_ADDIDATA_APCI7420, 5715 PCI_ANY_ID, 5716 PCI_ANY_ID, 5717 0, 5718 0, 5719 pbn_b0_2_115200 }, 5720 5721 { PCI_VENDOR_ID_ADDIDATA, 5722 PCI_DEVICE_ID_ADDIDATA_APCI7300, 5723 PCI_ANY_ID, 5724 PCI_ANY_ID, 5725 0, 5726 0, 5727 pbn_b0_1_115200 }, 5728 5729 { PCI_VENDOR_ID_AMCC, 5730 PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800, 5731 PCI_ANY_ID, 5732 PCI_ANY_ID, 5733 0, 5734 0, 5735 pbn_b1_8_115200 }, 5736 5737 { PCI_VENDOR_ID_ADDIDATA, 5738 PCI_DEVICE_ID_ADDIDATA_APCI7500_2, 5739 PCI_ANY_ID, 5740 PCI_ANY_ID, 5741 0, 5742 0, 5743 pbn_b0_4_115200 }, 5744 5745 { PCI_VENDOR_ID_ADDIDATA, 5746 PCI_DEVICE_ID_ADDIDATA_APCI7420_2, 5747 PCI_ANY_ID, 5748 PCI_ANY_ID, 5749 0, 5750 0, 5751 pbn_b0_2_115200 }, 5752 5753 { PCI_VENDOR_ID_ADDIDATA, 5754 PCI_DEVICE_ID_ADDIDATA_APCI7300_2, 5755 PCI_ANY_ID, 5756 PCI_ANY_ID, 5757 0, 5758 0, 5759 pbn_b0_1_115200 }, 5760 5761 { PCI_VENDOR_ID_ADDIDATA, 5762 PCI_DEVICE_ID_ADDIDATA_APCI7500_3, 5763 PCI_ANY_ID, 5764 PCI_ANY_ID, 5765 0, 5766 0, 5767 pbn_b0_4_115200 }, 5768 5769 { PCI_VENDOR_ID_ADDIDATA, 5770 PCI_DEVICE_ID_ADDIDATA_APCI7420_3, 5771 PCI_ANY_ID, 5772 PCI_ANY_ID, 5773 0, 5774 0, 5775 pbn_b0_2_115200 }, 5776 5777 { PCI_VENDOR_ID_ADDIDATA, 5778 PCI_DEVICE_ID_ADDIDATA_APCI7300_3, 5779 PCI_ANY_ID, 5780 PCI_ANY_ID, 5781 0, 5782 0, 5783 pbn_b0_1_115200 }, 5784 5785 { PCI_VENDOR_ID_ADDIDATA, 5786 PCI_DEVICE_ID_ADDIDATA_APCI7800_3, 5787 PCI_ANY_ID, 5788 PCI_ANY_ID, 5789 0, 5790 0, 5791 pbn_b0_8_115200 }, 5792 5793 { PCI_VENDOR_ID_ADDIDATA, 5794 PCI_DEVICE_ID_ADDIDATA_APCIe7500, 5795 PCI_ANY_ID, 5796 PCI_ANY_ID, 5797 0, 5798 0, 5799 pbn_ADDIDATA_PCIe_4_3906250 }, 5800 5801 { PCI_VENDOR_ID_ADDIDATA, 5802 PCI_DEVICE_ID_ADDIDATA_APCIe7420, 5803 PCI_ANY_ID, 5804 PCI_ANY_ID, 5805 0, 5806 0, 5807 pbn_ADDIDATA_PCIe_2_3906250 }, 5808 5809 { PCI_VENDOR_ID_ADDIDATA, 5810 PCI_DEVICE_ID_ADDIDATA_APCIe7300, 5811 PCI_ANY_ID, 5812 PCI_ANY_ID, 5813 0, 5814 0, 5815 pbn_ADDIDATA_PCIe_1_3906250 }, 5816 5817 { PCI_VENDOR_ID_ADDIDATA, 5818 PCI_DEVICE_ID_ADDIDATA_APCIe7800, 5819 PCI_ANY_ID, 5820 PCI_ANY_ID, 5821 0, 5822 0, 5823 pbn_ADDIDATA_PCIe_8_3906250 }, 5824 5825 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, 5826 PCI_VENDOR_ID_IBM, 0x0299, 5827 0, 0, pbn_b0_bt_2_115200 }, 5828 5829 /* 5830 * other NetMos 9835 devices are most likely handled by the 5831 * parport_serial driver, check drivers/parport/parport_serial.c 5832 * before adding them here. 5833 */ 5834 5835 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, 5836 0xA000, 0x1000, 5837 0, 0, pbn_b0_1_115200 }, 5838 5839 /* the 9901 is a rebranded 9912 */ 5840 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912, 5841 0xA000, 0x1000, 5842 0, 0, pbn_b0_1_115200 }, 5843 5844 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922, 5845 0xA000, 0x1000, 5846 0, 0, pbn_b0_1_115200 }, 5847 5848 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9904, 5849 0xA000, 0x1000, 5850 0, 0, pbn_b0_1_115200 }, 5851 5852 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, 5853 0xA000, 0x1000, 5854 0, 0, pbn_b0_1_115200 }, 5855 5856 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, 5857 0xA000, 0x3002, 5858 0, 0, pbn_NETMOS9900_2s_115200 }, 5859 5860 /* 5861 * Best Connectivity and Rosewill PCI Multi I/O cards 5862 */ 5863 5864 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, 5865 0xA000, 0x1000, 5866 0, 0, pbn_b0_1_115200 }, 5867 5868 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, 5869 0xA000, 0x3002, 5870 0, 0, pbn_b0_bt_2_115200 }, 5871 5872 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, 5873 0xA000, 0x3004, 5874 0, 0, pbn_b0_bt_4_115200 }, 5875 5876 /* 5877 * ASIX AX99100 PCIe to Multi I/O Controller 5878 */ 5879 { PCI_VENDOR_ID_ASIX, PCI_DEVICE_ID_ASIX_AX99100, 5880 0xA000, 0x1000, 5881 0, 0, pbn_b0_1_115200 }, 5882 5883 /* Intel CE4100 */ 5884 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART, 5885 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5886 pbn_ce4100_1_115200 }, 5887 5888 /* 5889 * Cronyx Omega PCI 5890 */ 5891 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA, 5892 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5893 pbn_omegapci }, 5894 5895 /* 5896 * Broadcom TruManage 5897 */ 5898 { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE, 5899 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5900 pbn_brcm_trumanage }, 5901 5902 /* 5903 * AgeStar as-prs2-009 5904 */ 5905 { PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375, 5906 PCI_ANY_ID, PCI_ANY_ID, 5907 0, 0, pbn_b0_bt_2_115200 }, 5908 5909 /* 5910 * WCH CH353 series devices: The 2S1P is handled by parport_serial 5911 * so not listed here. 5912 */ 5913 { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_4S, 5914 PCI_ANY_ID, PCI_ANY_ID, 5915 0, 0, pbn_b0_bt_4_115200 }, 5916 5917 { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_2S1PF, 5918 PCI_ANY_ID, PCI_ANY_ID, 5919 0, 0, pbn_b0_bt_2_115200 }, 5920 5921 { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH355_4S, 5922 PCI_ANY_ID, PCI_ANY_ID, 5923 0, 0, pbn_b0_bt_4_115200 }, 5924 5925 { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH382_2S, 5926 PCI_ANY_ID, PCI_ANY_ID, 5927 0, 0, pbn_wch382_2 }, 5928 5929 { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S, 5930 PCI_ANY_ID, PCI_ANY_ID, 5931 0, 0, pbn_wch384_4 }, 5932 5933 { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_8S, 5934 PCI_ANY_ID, PCI_ANY_ID, 5935 0, 0, pbn_wch384_8 }, 5936 /* 5937 * Realtek RealManage 5938 */ 5939 { PCI_VENDOR_ID_REALTEK, 0x816a, 5940 PCI_ANY_ID, PCI_ANY_ID, 5941 0, 0, pbn_b0_1_115200 }, 5942 5943 { PCI_VENDOR_ID_REALTEK, 0x816b, 5944 PCI_ANY_ID, PCI_ANY_ID, 5945 0, 0, pbn_b0_1_115200 }, 5946 5947 /* Fintek PCI serial cards */ 5948 { PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 }, 5949 { PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 }, 5950 { PCI_DEVICE(0x1c29, 0x1112), .driver_data = pbn_fintek_12 }, 5951 { PCI_DEVICE(0x1c29, 0x1204), .driver_data = pbn_fintek_F81504A }, 5952 { PCI_DEVICE(0x1c29, 0x1208), .driver_data = pbn_fintek_F81508A }, 5953 { PCI_DEVICE(0x1c29, 0x1212), .driver_data = pbn_fintek_F81512A }, 5954 5955 /* MKS Tenta SCOM-080x serial cards */ 5956 { PCI_DEVICE(0x1601, 0x0800), .driver_data = pbn_b0_4_1250000 }, 5957 { PCI_DEVICE(0x1601, 0xa801), .driver_data = pbn_b0_4_1250000 }, 5958 5959 /* Amazon PCI serial device */ 5960 { PCI_DEVICE(0x1d0f, 0x8250), .driver_data = pbn_b0_1_115200 }, 5961 5962 /* 5963 * These entries match devices with class COMMUNICATION_SERIAL, 5964 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL 5965 */ 5966 { PCI_ANY_ID, PCI_ANY_ID, 5967 PCI_ANY_ID, PCI_ANY_ID, 5968 PCI_CLASS_COMMUNICATION_SERIAL << 8, 5969 0xffff00, pbn_default }, 5970 { PCI_ANY_ID, PCI_ANY_ID, 5971 PCI_ANY_ID, PCI_ANY_ID, 5972 PCI_CLASS_COMMUNICATION_MODEM << 8, 5973 0xffff00, pbn_default }, 5974 { PCI_ANY_ID, PCI_ANY_ID, 5975 PCI_ANY_ID, PCI_ANY_ID, 5976 PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 5977 0xffff00, pbn_default }, 5978 { 0, } 5979 }; 5980 5981 static pci_ers_result_t serial8250_io_error_detected(struct pci_dev *dev, 5982 pci_channel_state_t state) 5983 { 5984 struct serial_private *priv = pci_get_drvdata(dev); 5985 5986 if (state == pci_channel_io_perm_failure) 5987 return PCI_ERS_RESULT_DISCONNECT; 5988 5989 if (priv) 5990 pciserial_detach_ports(priv); 5991 5992 pci_disable_device(dev); 5993 5994 return PCI_ERS_RESULT_NEED_RESET; 5995 } 5996 5997 static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev) 5998 { 5999 int rc; 6000 6001 rc = pci_enable_device(dev); 6002 6003 if (rc) 6004 return PCI_ERS_RESULT_DISCONNECT; 6005 6006 pci_restore_state(dev); 6007 pci_save_state(dev); 6008 6009 return PCI_ERS_RESULT_RECOVERED; 6010 } 6011 6012 static void serial8250_io_resume(struct pci_dev *dev) 6013 { 6014 struct serial_private *priv = pci_get_drvdata(dev); 6015 struct serial_private *new; 6016 6017 if (!priv) 6018 return; 6019 6020 new = pciserial_init_ports(dev, priv->board); 6021 if (!IS_ERR(new)) { 6022 pci_set_drvdata(dev, new); 6023 kfree(priv); 6024 } 6025 } 6026 6027 static const struct pci_error_handlers serial8250_err_handler = { 6028 .error_detected = serial8250_io_error_detected, 6029 .slot_reset = serial8250_io_slot_reset, 6030 .resume = serial8250_io_resume, 6031 }; 6032 6033 static struct pci_driver serial_pci_driver = { 6034 .name = "serial", 6035 .probe = pciserial_init_one, 6036 .remove = pciserial_remove_one, 6037 .driver = { 6038 .pm = &pciserial_pm_ops, 6039 }, 6040 .id_table = serial_pci_tbl, 6041 .err_handler = &serial8250_err_handler, 6042 }; 6043 6044 module_pci_driver(serial_pci_driver); 6045 6046 MODULE_LICENSE("GPL"); 6047 MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module"); 6048 MODULE_DEVICE_TABLE(pci, serial_pci_tbl); 6049 MODULE_IMPORT_NS(SERIAL_8250_PCI); 6050