1 /* 2 * Copyright (C) 2010 Lars-Peter Clausen <lars@metafoo.de> 3 * Copyright (C) 2015 Imagination Technologies 4 * 5 * Ingenic SoC UART support 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the 9 * Free Software Foundation; either version 2 of the License, or (at your 10 * option) any later version. 11 * 12 * You should have received a copy of the GNU General Public License along 13 * with this program; if not, write to the Free Software Foundation, Inc., 14 * 675 Mass Ave, Cambridge, MA 02139, USA. 15 */ 16 17 #include <linux/clk.h> 18 #include <linux/console.h> 19 #include <linux/io.h> 20 #include <linux/libfdt.h> 21 #include <linux/module.h> 22 #include <linux/of.h> 23 #include <linux/of_fdt.h> 24 #include <linux/of_device.h> 25 #include <linux/platform_device.h> 26 #include <linux/serial_8250.h> 27 #include <linux/serial_core.h> 28 #include <linux/serial_reg.h> 29 30 #include "8250.h" 31 32 /** ingenic_uart_config: SOC specific config data. */ 33 struct ingenic_uart_config { 34 int tx_loadsz; 35 int fifosize; 36 }; 37 38 struct ingenic_uart_data { 39 struct clk *clk_module; 40 struct clk *clk_baud; 41 int line; 42 }; 43 44 static const struct of_device_id of_match[]; 45 46 #define UART_FCR_UME BIT(4) 47 48 #define UART_MCR_MDCE BIT(7) 49 #define UART_MCR_FCM BIT(6) 50 51 static struct earlycon_device *early_device; 52 53 static uint8_t __init early_in(struct uart_port *port, int offset) 54 { 55 return readl(port->membase + (offset << 2)); 56 } 57 58 static void __init early_out(struct uart_port *port, int offset, uint8_t value) 59 { 60 writel(value, port->membase + (offset << 2)); 61 } 62 63 static void __init ingenic_early_console_putc(struct uart_port *port, int c) 64 { 65 uint8_t lsr; 66 67 do { 68 lsr = early_in(port, UART_LSR); 69 } while ((lsr & UART_LSR_TEMT) == 0); 70 71 early_out(port, UART_TX, c); 72 } 73 74 static void __init ingenic_early_console_write(struct console *console, 75 const char *s, unsigned int count) 76 { 77 uart_console_write(&early_device->port, s, count, 78 ingenic_early_console_putc); 79 } 80 81 static void __init ingenic_early_console_setup_clock(struct earlycon_device *dev) 82 { 83 void *fdt = initial_boot_params; 84 const __be32 *prop; 85 int offset; 86 87 offset = fdt_path_offset(fdt, "/ext"); 88 if (offset < 0) 89 return; 90 91 prop = fdt_getprop(fdt, offset, "clock-frequency", NULL); 92 if (!prop) 93 return; 94 95 dev->port.uartclk = be32_to_cpup(prop); 96 } 97 98 static int __init ingenic_early_console_setup(struct earlycon_device *dev, 99 const char *opt) 100 { 101 struct uart_port *port = &dev->port; 102 unsigned int baud, divisor; 103 104 if (!dev->port.membase) 105 return -ENODEV; 106 107 ingenic_early_console_setup_clock(dev); 108 109 baud = dev->baud ?: 115200; 110 divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * baud); 111 112 early_out(port, UART_IER, 0); 113 early_out(port, UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8); 114 early_out(port, UART_DLL, 0); 115 early_out(port, UART_DLM, 0); 116 early_out(port, UART_LCR, UART_LCR_WLEN8); 117 early_out(port, UART_FCR, UART_FCR_UME | UART_FCR_CLEAR_XMIT | 118 UART_FCR_CLEAR_RCVR | UART_FCR_ENABLE_FIFO); 119 early_out(port, UART_MCR, UART_MCR_RTS | UART_MCR_DTR); 120 121 early_out(port, UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8); 122 early_out(port, UART_DLL, divisor & 0xff); 123 early_out(port, UART_DLM, (divisor >> 8) & 0xff); 124 early_out(port, UART_LCR, UART_LCR_WLEN8); 125 126 early_device = dev; 127 dev->con->write = ingenic_early_console_write; 128 129 return 0; 130 } 131 132 EARLYCON_DECLARE(jz4740_uart, ingenic_early_console_setup); 133 OF_EARLYCON_DECLARE(jz4740_uart, "ingenic,jz4740-uart", 134 ingenic_early_console_setup); 135 136 EARLYCON_DECLARE(jz4775_uart, ingenic_early_console_setup); 137 OF_EARLYCON_DECLARE(jz4775_uart, "ingenic,jz4775-uart", 138 ingenic_early_console_setup); 139 140 EARLYCON_DECLARE(jz4780_uart, ingenic_early_console_setup); 141 OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart", 142 ingenic_early_console_setup); 143 144 static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value) 145 { 146 int ier; 147 148 switch (offset) { 149 case UART_FCR: 150 /* UART module enable */ 151 value |= UART_FCR_UME; 152 break; 153 154 case UART_IER: 155 /* Enable receive timeout interrupt with the 156 * receive line status interrupt */ 157 value |= (value & 0x4) << 2; 158 break; 159 160 case UART_MCR: 161 /* If we have enabled modem status IRQs we should enable modem 162 * mode. */ 163 ier = p->serial_in(p, UART_IER); 164 165 if (ier & UART_IER_MSI) 166 value |= UART_MCR_MDCE | UART_MCR_FCM; 167 else 168 value &= ~(UART_MCR_MDCE | UART_MCR_FCM); 169 break; 170 171 default: 172 break; 173 } 174 175 writeb(value, p->membase + (offset << p->regshift)); 176 } 177 178 static unsigned int ingenic_uart_serial_in(struct uart_port *p, int offset) 179 { 180 unsigned int value; 181 182 value = readb(p->membase + (offset << p->regshift)); 183 184 /* Hide non-16550 compliant bits from higher levels */ 185 switch (offset) { 186 case UART_FCR: 187 value &= ~UART_FCR_UME; 188 break; 189 190 case UART_MCR: 191 value &= ~(UART_MCR_MDCE | UART_MCR_FCM); 192 break; 193 194 default: 195 break; 196 } 197 return value; 198 } 199 200 static int ingenic_uart_probe(struct platform_device *pdev) 201 { 202 struct uart_8250_port uart = {}; 203 struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); 204 struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); 205 struct ingenic_uart_data *data; 206 const struct ingenic_uart_config *cdata; 207 const struct of_device_id *match; 208 int err, line; 209 210 match = of_match_device(of_match, &pdev->dev); 211 if (!match) { 212 dev_err(&pdev->dev, "Error: No device match found\n"); 213 return -ENODEV; 214 } 215 cdata = match->data; 216 217 if (!regs || !irq) { 218 dev_err(&pdev->dev, "no registers/irq defined\n"); 219 return -EINVAL; 220 } 221 222 data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); 223 if (!data) 224 return -ENOMEM; 225 226 spin_lock_init(&uart.port.lock); 227 uart.port.type = PORT_16550A; 228 uart.port.flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE; 229 uart.port.iotype = UPIO_MEM; 230 uart.port.mapbase = regs->start; 231 uart.port.regshift = 2; 232 uart.port.serial_out = ingenic_uart_serial_out; 233 uart.port.serial_in = ingenic_uart_serial_in; 234 uart.port.irq = irq->start; 235 uart.port.dev = &pdev->dev; 236 uart.port.fifosize = cdata->fifosize; 237 uart.tx_loadsz = cdata->tx_loadsz; 238 uart.capabilities = UART_CAP_FIFO | UART_CAP_RTOIE; 239 240 /* Check for a fixed line number */ 241 line = of_alias_get_id(pdev->dev.of_node, "serial"); 242 if (line >= 0) 243 uart.port.line = line; 244 245 uart.port.membase = devm_ioremap(&pdev->dev, regs->start, 246 resource_size(regs)); 247 if (!uart.port.membase) 248 return -ENOMEM; 249 250 data->clk_module = devm_clk_get(&pdev->dev, "module"); 251 if (IS_ERR(data->clk_module)) { 252 err = PTR_ERR(data->clk_module); 253 if (err != -EPROBE_DEFER) 254 dev_err(&pdev->dev, 255 "unable to get module clock: %d\n", err); 256 return err; 257 } 258 259 data->clk_baud = devm_clk_get(&pdev->dev, "baud"); 260 if (IS_ERR(data->clk_baud)) { 261 err = PTR_ERR(data->clk_baud); 262 if (err != -EPROBE_DEFER) 263 dev_err(&pdev->dev, 264 "unable to get baud clock: %d\n", err); 265 return err; 266 } 267 268 err = clk_prepare_enable(data->clk_module); 269 if (err) { 270 dev_err(&pdev->dev, "could not enable module clock: %d\n", err); 271 goto out; 272 } 273 274 err = clk_prepare_enable(data->clk_baud); 275 if (err) { 276 dev_err(&pdev->dev, "could not enable baud clock: %d\n", err); 277 goto out_disable_moduleclk; 278 } 279 uart.port.uartclk = clk_get_rate(data->clk_baud); 280 281 data->line = serial8250_register_8250_port(&uart); 282 if (data->line < 0) { 283 err = data->line; 284 goto out_disable_baudclk; 285 } 286 287 platform_set_drvdata(pdev, data); 288 return 0; 289 290 out_disable_baudclk: 291 clk_disable_unprepare(data->clk_baud); 292 out_disable_moduleclk: 293 clk_disable_unprepare(data->clk_module); 294 out: 295 return err; 296 } 297 298 static int ingenic_uart_remove(struct platform_device *pdev) 299 { 300 struct ingenic_uart_data *data = platform_get_drvdata(pdev); 301 302 serial8250_unregister_port(data->line); 303 clk_disable_unprepare(data->clk_module); 304 clk_disable_unprepare(data->clk_baud); 305 return 0; 306 } 307 308 static const struct ingenic_uart_config jz4740_uart_config = { 309 .tx_loadsz = 8, 310 .fifosize = 16, 311 }; 312 313 static const struct ingenic_uart_config jz4760_uart_config = { 314 .tx_loadsz = 16, 315 .fifosize = 32, 316 }; 317 318 static const struct ingenic_uart_config jz4780_uart_config = { 319 .tx_loadsz = 32, 320 .fifosize = 64, 321 }; 322 323 static const struct of_device_id of_match[] = { 324 { .compatible = "ingenic,jz4740-uart", .data = &jz4740_uart_config }, 325 { .compatible = "ingenic,jz4760-uart", .data = &jz4760_uart_config }, 326 { .compatible = "ingenic,jz4775-uart", .data = &jz4760_uart_config }, 327 { .compatible = "ingenic,jz4780-uart", .data = &jz4780_uart_config }, 328 { /* sentinel */ } 329 }; 330 MODULE_DEVICE_TABLE(of, of_match); 331 332 static struct platform_driver ingenic_uart_platform_driver = { 333 .driver = { 334 .name = "ingenic-uart", 335 .of_match_table = of_match, 336 }, 337 .probe = ingenic_uart_probe, 338 .remove = ingenic_uart_remove, 339 }; 340 341 module_platform_driver(ingenic_uart_platform_driver); 342 343 MODULE_AUTHOR("Paul Burton"); 344 MODULE_LICENSE("GPL"); 345 MODULE_DESCRIPTION("Ingenic SoC UART driver"); 346