1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Early serial console for 8250/16550 devices 4 * 5 * (c) Copyright 2004 Hewlett-Packard Development Company, L.P. 6 * Bjorn Helgaas <bjorn.helgaas@hp.com> 7 * 8 * Based on the 8250.c serial driver, Copyright (C) 2001 Russell King, 9 * and on early_printk.c by Andi Kleen. 10 * 11 * This is for use before the serial driver has initialized, in 12 * particular, before the UARTs have been discovered and named. 13 * Instead of specifying the console device as, e.g., "ttyS0", 14 * we locate the device directly by its MMIO or I/O port address. 15 * 16 * The user can specify the device directly, e.g., 17 * earlycon=uart8250,io,0x3f8,9600n8 18 * earlycon=uart8250,mmio,0xff5e0000,115200n8 19 * earlycon=uart8250,mmio32,0xff5e0000,115200n8 20 * or 21 * console=uart8250,io,0x3f8,9600n8 22 * console=uart8250,mmio,0xff5e0000,115200n8 23 * console=uart8250,mmio32,0xff5e0000,115200n8 24 */ 25 26 #include <linux/tty.h> 27 #include <linux/init.h> 28 #include <linux/console.h> 29 #include <linux/of.h> 30 #include <linux/of_device.h> 31 #include <linux/serial_reg.h> 32 #include <linux/serial.h> 33 #include <linux/serial_8250.h> 34 #include <asm/io.h> 35 #include <asm/serial.h> 36 37 static unsigned int serial8250_early_in(struct uart_port *port, int offset) 38 { 39 int reg_offset = offset; 40 offset <<= port->regshift; 41 42 switch (port->iotype) { 43 case UPIO_MEM: 44 return readb(port->membase + offset); 45 case UPIO_MEM16: 46 return readw(port->membase + offset); 47 case UPIO_MEM32: 48 return readl(port->membase + offset); 49 case UPIO_MEM32BE: 50 return ioread32be(port->membase + offset); 51 case UPIO_PORT: 52 return inb(port->iobase + offset); 53 case UPIO_AU: 54 return port->serial_in(port, reg_offset); 55 default: 56 return 0; 57 } 58 } 59 60 static void serial8250_early_out(struct uart_port *port, int offset, int value) 61 { 62 int reg_offset = offset; 63 offset <<= port->regshift; 64 65 switch (port->iotype) { 66 case UPIO_MEM: 67 writeb(value, port->membase + offset); 68 break; 69 case UPIO_MEM16: 70 writew(value, port->membase + offset); 71 break; 72 case UPIO_MEM32: 73 writel(value, port->membase + offset); 74 break; 75 case UPIO_MEM32BE: 76 iowrite32be(value, port->membase + offset); 77 break; 78 case UPIO_PORT: 79 outb(value, port->iobase + offset); 80 break; 81 case UPIO_AU: 82 port->serial_out(port, reg_offset, value); 83 break; 84 } 85 } 86 87 static void serial_putc(struct uart_port *port, unsigned char c) 88 { 89 unsigned int status; 90 91 serial8250_early_out(port, UART_TX, c); 92 93 for (;;) { 94 status = serial8250_early_in(port, UART_LSR); 95 if (uart_lsr_tx_empty(status)) 96 break; 97 cpu_relax(); 98 } 99 } 100 101 static void early_serial8250_write(struct console *console, 102 const char *s, unsigned int count) 103 { 104 struct earlycon_device *device = console->data; 105 struct uart_port *port = &device->port; 106 107 uart_console_write(port, s, count, serial_putc); 108 } 109 110 #ifdef CONFIG_CONSOLE_POLL 111 static int early_serial8250_read(struct console *console, 112 char *s, unsigned int count) 113 { 114 struct earlycon_device *device = console->data; 115 struct uart_port *port = &device->port; 116 unsigned int status; 117 int num_read = 0; 118 119 while (num_read < count) { 120 status = serial8250_early_in(port, UART_LSR); 121 if (!(status & UART_LSR_DR)) 122 break; 123 s[num_read++] = serial8250_early_in(port, UART_RX); 124 } 125 126 return num_read; 127 } 128 #else 129 #define early_serial8250_read NULL 130 #endif 131 132 static void __init init_port(struct earlycon_device *device) 133 { 134 struct uart_port *port = &device->port; 135 unsigned int divisor; 136 unsigned char c; 137 unsigned int ier; 138 139 serial8250_early_out(port, UART_LCR, UART_LCR_WLEN8); /* 8n1 */ 140 ier = serial8250_early_in(port, UART_IER); 141 serial8250_early_out(port, UART_IER, ier & UART_IER_UUE); /* no interrupt */ 142 serial8250_early_out(port, UART_FCR, 0); /* no fifo */ 143 serial8250_early_out(port, UART_MCR, UART_MCR_DTR | UART_MCR_RTS); 144 145 if (port->uartclk) { 146 divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud); 147 c = serial8250_early_in(port, UART_LCR); 148 serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB); 149 serial8250_early_out(port, UART_DLL, divisor & 0xff); 150 serial8250_early_out(port, UART_DLM, (divisor >> 8) & 0xff); 151 serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB); 152 } 153 } 154 155 int __init early_serial8250_setup(struct earlycon_device *device, 156 const char *options) 157 { 158 if (!(device->port.membase || device->port.iobase)) 159 return -ENODEV; 160 161 if (!device->baud) { 162 struct uart_port *port = &device->port; 163 unsigned int ier; 164 165 /* assume the device was initialized, only mask interrupts */ 166 ier = serial8250_early_in(port, UART_IER); 167 serial8250_early_out(port, UART_IER, ier & UART_IER_UUE); 168 } else 169 init_port(device); 170 171 device->con->write = early_serial8250_write; 172 device->con->read = early_serial8250_read; 173 return 0; 174 } 175 EARLYCON_DECLARE(uart8250, early_serial8250_setup); 176 EARLYCON_DECLARE(uart, early_serial8250_setup); 177 OF_EARLYCON_DECLARE(ns16550, "ns16550", early_serial8250_setup); 178 OF_EARLYCON_DECLARE(ns16550a, "ns16550a", early_serial8250_setup); 179 OF_EARLYCON_DECLARE(uart, "nvidia,tegra20-uart", early_serial8250_setup); 180 OF_EARLYCON_DECLARE(uart, "snps,dw-apb-uart", early_serial8250_setup); 181 182 #ifdef CONFIG_SERIAL_8250_OMAP 183 184 static int __init early_omap8250_setup(struct earlycon_device *device, 185 const char *options) 186 { 187 struct uart_port *port = &device->port; 188 189 if (!(device->port.membase || device->port.iobase)) 190 return -ENODEV; 191 192 port->regshift = 2; 193 device->con->write = early_serial8250_write; 194 return 0; 195 } 196 197 OF_EARLYCON_DECLARE(omap8250, "ti,omap2-uart", early_omap8250_setup); 198 OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup); 199 OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup); 200 201 #endif 202 203 #ifdef CONFIG_SERIAL_8250_RT288X 204 205 static int __init early_au_setup(struct earlycon_device *dev, const char *opt) 206 { 207 dev->port.serial_in = au_serial_in; 208 dev->port.serial_out = au_serial_out; 209 dev->port.iotype = UPIO_AU; 210 dev->con->write = early_serial8250_write; 211 return 0; 212 } 213 OF_EARLYCON_DECLARE(palmchip, "ralink,rt2880-uart", early_au_setup); 214 215 #endif 216