xref: /openbmc/linux/drivers/tty/serial/8250/8250_dfl.c (revision fa0dadde)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Driver for FPGA UART
4  *
5  * Copyright (C) 2022 Intel Corporation.
6  *
7  * Authors:
8  *   Ananda Ravuri <ananda.ravuri@intel.com>
9  *   Matthew Gerlach <matthew.gerlach@linux.intel.com>
10  */
11 
12 #include <linux/bitfield.h>
13 #include <linux/device.h>
14 #include <linux/dfl.h>
15 #include <linux/errno.h>
16 #include <linux/ioport.h>
17 #include <linux/module.h>
18 #include <linux/mod_devicetable.h>
19 #include <linux/types.h>
20 
21 #include <linux/serial.h>
22 #include <linux/serial_8250.h>
23 
24 #define DFHv1_PARAM_ID_CLK_FRQ    0x2
25 #define DFHv1_PARAM_ID_FIFO_LEN   0x3
26 
27 #define DFHv1_PARAM_ID_REG_LAYOUT	0x4
28 #define DFHv1_PARAM_REG_LAYOUT_WIDTH	GENMASK_ULL(63, 32)
29 #define DFHv1_PARAM_REG_LAYOUT_SHIFT	GENMASK_ULL(31, 0)
30 
31 struct dfl_uart {
32 	int line;
33 };
34 
35 static int dfh_get_u64_param_val(struct dfl_device *dfl_dev, int param_id, u64 *pval)
36 {
37 	size_t psize;
38 	u64 *p;
39 
40 	p = dfh_find_param(dfl_dev, param_id, &psize);
41 	if (IS_ERR(p))
42 		return PTR_ERR(p);
43 
44 	if (psize != sizeof(*pval))
45 		return -EINVAL;
46 
47 	*pval = *p;
48 
49 	return 0;
50 }
51 
52 static int dfl_uart_get_params(struct dfl_device *dfl_dev, struct uart_8250_port *uart)
53 {
54 	struct device *dev = &dfl_dev->dev;
55 	u64 fifo_len, clk_freq, reg_layout;
56 	u32 reg_width;
57 	int ret;
58 
59 	ret = dfh_get_u64_param_val(dfl_dev, DFHv1_PARAM_ID_CLK_FRQ, &clk_freq);
60 	if (ret)
61 		return dev_err_probe(dev, ret, "missing CLK_FRQ param\n");
62 
63 	uart->port.uartclk = clk_freq;
64 
65 	ret = dfh_get_u64_param_val(dfl_dev, DFHv1_PARAM_ID_FIFO_LEN, &fifo_len);
66 	if (ret)
67 		return dev_err_probe(dev, ret, "missing FIFO_LEN param\n");
68 
69 	switch (fifo_len) {
70 	case 32:
71 		uart->port.type = PORT_ALTR_16550_F32;
72 		break;
73 
74 	case 64:
75 		uart->port.type = PORT_ALTR_16550_F64;
76 		break;
77 
78 	case 128:
79 		uart->port.type = PORT_ALTR_16550_F128;
80 		break;
81 
82 	default:
83 		return dev_err_probe(dev, -EINVAL, "unsupported FIFO_LEN %llu\n", fifo_len);
84 	}
85 
86 	ret = dfh_get_u64_param_val(dfl_dev, DFHv1_PARAM_ID_REG_LAYOUT, &reg_layout);
87 	if (ret)
88 		return dev_err_probe(dev, ret, "missing REG_LAYOUT param\n");
89 
90 	uart->port.regshift = FIELD_GET(DFHv1_PARAM_REG_LAYOUT_SHIFT, reg_layout);
91 	reg_width = FIELD_GET(DFHv1_PARAM_REG_LAYOUT_WIDTH, reg_layout);
92 	switch (reg_width) {
93 	case 4:
94 		uart->port.iotype = UPIO_MEM32;
95 		break;
96 
97 	case 2:
98 		uart->port.iotype = UPIO_MEM16;
99 		break;
100 
101 	default:
102 		return dev_err_probe(dev, -EINVAL, "unsupported reg-width %u\n", reg_width);
103 
104 	}
105 
106 	return 0;
107 }
108 
109 static int dfl_uart_probe(struct dfl_device *dfl_dev)
110 {
111 	struct device *dev = &dfl_dev->dev;
112 	struct uart_8250_port uart = { };
113 	struct dfl_uart *dfluart;
114 	int ret;
115 
116 	uart.port.flags = UPF_IOREMAP;
117 	uart.port.mapbase = dfl_dev->mmio_res.start;
118 	uart.port.mapsize = resource_size(&dfl_dev->mmio_res);
119 
120 	ret = dfl_uart_get_params(dfl_dev, &uart);
121 	if (ret < 0)
122 		return dev_err_probe(dev, ret, "failed uart feature walk\n");
123 
124 	if (dfl_dev->num_irqs == 1)
125 		uart.port.irq = dfl_dev->irqs[0];
126 
127 	dfluart = devm_kzalloc(dev, sizeof(*dfluart), GFP_KERNEL);
128 	if (!dfluart)
129 		return -ENOMEM;
130 
131 	dfluart->line = serial8250_register_8250_port(&uart);
132 	if (dfluart->line < 0)
133 		return dev_err_probe(dev, dfluart->line, "unable to register 8250 port.\n");
134 
135 	dev_set_drvdata(dev, dfluart);
136 
137 	return 0;
138 }
139 
140 static void dfl_uart_remove(struct dfl_device *dfl_dev)
141 {
142 	struct dfl_uart *dfluart = dev_get_drvdata(&dfl_dev->dev);
143 
144 	serial8250_unregister_port(dfluart->line);
145 }
146 
147 #define FME_FEATURE_ID_UART 0x24
148 
149 static const struct dfl_device_id dfl_uart_ids[] = {
150 	{ FME_ID, FME_FEATURE_ID_UART },
151 	{ }
152 };
153 MODULE_DEVICE_TABLE(dfl, dfl_uart_ids);
154 
155 static struct dfl_driver dfl_uart_driver = {
156 	.drv = {
157 		.name = "dfl-uart",
158 	},
159 	.id_table = dfl_uart_ids,
160 	.probe = dfl_uart_probe,
161 	.remove = dfl_uart_remove,
162 };
163 module_dfl_driver(dfl_uart_driver);
164 
165 MODULE_DESCRIPTION("DFL Intel UART driver");
166 MODULE_AUTHOR("Intel Corporation");
167 MODULE_LICENSE("GPL");
168