1 /* 2 * Universal/legacy driver for 8250/16550-type serial ports 3 * 4 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. 5 * 6 * Copyright (C) 2001 Russell King. 7 * 8 * Supports: ISA-compatible 8250/16550 ports 9 * PNP 8250/16550 ports 10 * early_serial_setup() ports 11 * userspace-configurable "phantom" ports 12 * "serial8250" platform devices 13 * serial8250_register_8250_port() ports 14 * 15 * This program is free software; you can redistribute it and/or modify 16 * it under the terms of the GNU General Public License as published by 17 * the Free Software Foundation; either version 2 of the License, or 18 * (at your option) any later version. 19 */ 20 21 #include <linux/module.h> 22 #include <linux/moduleparam.h> 23 #include <linux/ioport.h> 24 #include <linux/init.h> 25 #include <linux/console.h> 26 #include <linux/sysrq.h> 27 #include <linux/delay.h> 28 #include <linux/platform_device.h> 29 #include <linux/tty.h> 30 #include <linux/ratelimit.h> 31 #include <linux/tty_flip.h> 32 #include <linux/serial.h> 33 #include <linux/serial_8250.h> 34 #include <linux/nmi.h> 35 #include <linux/mutex.h> 36 #include <linux/slab.h> 37 #include <linux/uaccess.h> 38 #include <linux/pm_runtime.h> 39 #include <linux/io.h> 40 #ifdef CONFIG_SPARC 41 #include <linux/sunserialcore.h> 42 #endif 43 44 #include <asm/irq.h> 45 46 #include "8250.h" 47 48 /* 49 * Configuration: 50 * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option 51 * is unsafe when used on edge-triggered interrupts. 52 */ 53 static unsigned int share_irqs = SERIAL8250_SHARE_IRQS; 54 55 static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS; 56 57 static struct uart_driver serial8250_reg; 58 59 static unsigned int skip_txen_test; /* force skip of txen test at init time */ 60 61 #define PASS_LIMIT 512 62 63 #include <asm/serial.h> 64 /* 65 * SERIAL_PORT_DFNS tells us about built-in ports that have no 66 * standard enumeration mechanism. Platforms that can find all 67 * serial ports via mechanisms like ACPI or PCI need not supply it. 68 */ 69 #ifndef SERIAL_PORT_DFNS 70 #define SERIAL_PORT_DFNS 71 #endif 72 73 static const struct old_serial_port old_serial_port[] = { 74 SERIAL_PORT_DFNS /* defined in asm/serial.h */ 75 }; 76 77 #define UART_NR CONFIG_SERIAL_8250_NR_UARTS 78 79 #ifdef CONFIG_SERIAL_8250_RSA 80 81 #define PORT_RSA_MAX 4 82 static unsigned long probe_rsa[PORT_RSA_MAX]; 83 static unsigned int probe_rsa_count; 84 #endif /* CONFIG_SERIAL_8250_RSA */ 85 86 struct irq_info { 87 struct hlist_node node; 88 int irq; 89 spinlock_t lock; /* Protects list not the hash */ 90 struct list_head *head; 91 }; 92 93 #define NR_IRQ_HASH 32 /* Can be adjusted later */ 94 static struct hlist_head irq_lists[NR_IRQ_HASH]; 95 static DEFINE_MUTEX(hash_mutex); /* Used to walk the hash */ 96 97 /* 98 * This is the serial driver's interrupt routine. 99 * 100 * Arjan thinks the old way was overly complex, so it got simplified. 101 * Alan disagrees, saying that need the complexity to handle the weird 102 * nature of ISA shared interrupts. (This is a special exception.) 103 * 104 * In order to handle ISA shared interrupts properly, we need to check 105 * that all ports have been serviced, and therefore the ISA interrupt 106 * line has been de-asserted. 107 * 108 * This means we need to loop through all ports. checking that they 109 * don't have an interrupt pending. 110 */ 111 static irqreturn_t serial8250_interrupt(int irq, void *dev_id) 112 { 113 struct irq_info *i = dev_id; 114 struct list_head *l, *end = NULL; 115 int pass_counter = 0, handled = 0; 116 117 DEBUG_INTR("serial8250_interrupt(%d)...", irq); 118 119 spin_lock(&i->lock); 120 121 l = i->head; 122 do { 123 struct uart_8250_port *up; 124 struct uart_port *port; 125 126 up = list_entry(l, struct uart_8250_port, list); 127 port = &up->port; 128 129 if (port->handle_irq(port)) { 130 handled = 1; 131 end = NULL; 132 } else if (end == NULL) 133 end = l; 134 135 l = l->next; 136 137 if (l == i->head && pass_counter++ > PASS_LIMIT) { 138 /* If we hit this, we're dead. */ 139 printk_ratelimited(KERN_ERR 140 "serial8250: too much work for irq%d\n", irq); 141 break; 142 } 143 } while (l != end); 144 145 spin_unlock(&i->lock); 146 147 DEBUG_INTR("end.\n"); 148 149 return IRQ_RETVAL(handled); 150 } 151 152 /* 153 * To support ISA shared interrupts, we need to have one interrupt 154 * handler that ensures that the IRQ line has been deasserted 155 * before returning. Failing to do this will result in the IRQ 156 * line being stuck active, and, since ISA irqs are edge triggered, 157 * no more IRQs will be seen. 158 */ 159 static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up) 160 { 161 spin_lock_irq(&i->lock); 162 163 if (!list_empty(i->head)) { 164 if (i->head == &up->list) 165 i->head = i->head->next; 166 list_del(&up->list); 167 } else { 168 BUG_ON(i->head != &up->list); 169 i->head = NULL; 170 } 171 spin_unlock_irq(&i->lock); 172 /* List empty so throw away the hash node */ 173 if (i->head == NULL) { 174 hlist_del(&i->node); 175 kfree(i); 176 } 177 } 178 179 static int serial_link_irq_chain(struct uart_8250_port *up) 180 { 181 struct hlist_head *h; 182 struct hlist_node *n; 183 struct irq_info *i; 184 int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0; 185 186 mutex_lock(&hash_mutex); 187 188 h = &irq_lists[up->port.irq % NR_IRQ_HASH]; 189 190 hlist_for_each(n, h) { 191 i = hlist_entry(n, struct irq_info, node); 192 if (i->irq == up->port.irq) 193 break; 194 } 195 196 if (n == NULL) { 197 i = kzalloc(sizeof(struct irq_info), GFP_KERNEL); 198 if (i == NULL) { 199 mutex_unlock(&hash_mutex); 200 return -ENOMEM; 201 } 202 spin_lock_init(&i->lock); 203 i->irq = up->port.irq; 204 hlist_add_head(&i->node, h); 205 } 206 mutex_unlock(&hash_mutex); 207 208 spin_lock_irq(&i->lock); 209 210 if (i->head) { 211 list_add(&up->list, i->head); 212 spin_unlock_irq(&i->lock); 213 214 ret = 0; 215 } else { 216 INIT_LIST_HEAD(&up->list); 217 i->head = &up->list; 218 spin_unlock_irq(&i->lock); 219 irq_flags |= up->port.irqflags; 220 ret = request_irq(up->port.irq, serial8250_interrupt, 221 irq_flags, "serial", i); 222 if (ret < 0) 223 serial_do_unlink(i, up); 224 } 225 226 return ret; 227 } 228 229 static void serial_unlink_irq_chain(struct uart_8250_port *up) 230 { 231 /* 232 * yes, some broken gcc emit "warning: 'i' may be used uninitialized" 233 * but no, we are not going to take a patch that assigns NULL below. 234 */ 235 struct irq_info *i; 236 struct hlist_node *n; 237 struct hlist_head *h; 238 239 mutex_lock(&hash_mutex); 240 241 h = &irq_lists[up->port.irq % NR_IRQ_HASH]; 242 243 hlist_for_each(n, h) { 244 i = hlist_entry(n, struct irq_info, node); 245 if (i->irq == up->port.irq) 246 break; 247 } 248 249 BUG_ON(n == NULL); 250 BUG_ON(i->head == NULL); 251 252 if (list_empty(i->head)) 253 free_irq(up->port.irq, i); 254 255 serial_do_unlink(i, up); 256 mutex_unlock(&hash_mutex); 257 } 258 259 /* 260 * This function is used to handle ports that do not have an 261 * interrupt. This doesn't work very well for 16450's, but gives 262 * barely passable results for a 16550A. (Although at the expense 263 * of much CPU overhead). 264 */ 265 static void serial8250_timeout(unsigned long data) 266 { 267 struct uart_8250_port *up = (struct uart_8250_port *)data; 268 269 up->port.handle_irq(&up->port); 270 mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port)); 271 } 272 273 static void serial8250_backup_timeout(unsigned long data) 274 { 275 struct uart_8250_port *up = (struct uart_8250_port *)data; 276 unsigned int iir, ier = 0, lsr; 277 unsigned long flags; 278 279 spin_lock_irqsave(&up->port.lock, flags); 280 281 /* 282 * Must disable interrupts or else we risk racing with the interrupt 283 * based handler. 284 */ 285 if (up->port.irq) { 286 ier = serial_in(up, UART_IER); 287 serial_out(up, UART_IER, 0); 288 } 289 290 iir = serial_in(up, UART_IIR); 291 292 /* 293 * This should be a safe test for anyone who doesn't trust the 294 * IIR bits on their UART, but it's specifically designed for 295 * the "Diva" UART used on the management processor on many HP 296 * ia64 and parisc boxes. 297 */ 298 lsr = serial_in(up, UART_LSR); 299 up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; 300 if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) && 301 (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) && 302 (lsr & UART_LSR_THRE)) { 303 iir &= ~(UART_IIR_ID | UART_IIR_NO_INT); 304 iir |= UART_IIR_THRI; 305 } 306 307 if (!(iir & UART_IIR_NO_INT)) 308 serial8250_tx_chars(up); 309 310 if (up->port.irq) 311 serial_out(up, UART_IER, ier); 312 313 spin_unlock_irqrestore(&up->port.lock, flags); 314 315 /* Standard timer interval plus 0.2s to keep the port running */ 316 mod_timer(&up->timer, 317 jiffies + uart_poll_timeout(&up->port) + HZ / 5); 318 } 319 320 static int univ8250_setup_irq(struct uart_8250_port *up) 321 { 322 struct uart_port *port = &up->port; 323 int retval = 0; 324 325 /* 326 * The above check will only give an accurate result the first time 327 * the port is opened so this value needs to be preserved. 328 */ 329 if (up->bugs & UART_BUG_THRE) { 330 pr_debug("ttyS%d - using backup timer\n", serial_index(port)); 331 332 up->timer.function = serial8250_backup_timeout; 333 up->timer.data = (unsigned long)up; 334 mod_timer(&up->timer, jiffies + 335 uart_poll_timeout(port) + HZ / 5); 336 } 337 338 /* 339 * If the "interrupt" for this port doesn't correspond with any 340 * hardware interrupt, we use a timer-based system. The original 341 * driver used to do this with IRQ0. 342 */ 343 if (!port->irq) { 344 up->timer.data = (unsigned long)up; 345 mod_timer(&up->timer, jiffies + uart_poll_timeout(port)); 346 } else 347 retval = serial_link_irq_chain(up); 348 349 return retval; 350 } 351 352 static void univ8250_release_irq(struct uart_8250_port *up) 353 { 354 struct uart_port *port = &up->port; 355 356 del_timer_sync(&up->timer); 357 up->timer.function = serial8250_timeout; 358 if (port->irq) 359 serial_unlink_irq_chain(up); 360 } 361 362 #ifdef CONFIG_SERIAL_8250_RSA 363 static int serial8250_request_rsa_resource(struct uart_8250_port *up) 364 { 365 unsigned long start = UART_RSA_BASE << up->port.regshift; 366 unsigned int size = 8 << up->port.regshift; 367 struct uart_port *port = &up->port; 368 int ret = -EINVAL; 369 370 switch (port->iotype) { 371 case UPIO_HUB6: 372 case UPIO_PORT: 373 start += port->iobase; 374 if (request_region(start, size, "serial-rsa")) 375 ret = 0; 376 else 377 ret = -EBUSY; 378 break; 379 } 380 381 return ret; 382 } 383 384 static void serial8250_release_rsa_resource(struct uart_8250_port *up) 385 { 386 unsigned long offset = UART_RSA_BASE << up->port.regshift; 387 unsigned int size = 8 << up->port.regshift; 388 struct uart_port *port = &up->port; 389 390 switch (port->iotype) { 391 case UPIO_HUB6: 392 case UPIO_PORT: 393 release_region(port->iobase + offset, size); 394 break; 395 } 396 } 397 #endif 398 399 static const struct uart_ops *base_ops; 400 static struct uart_ops univ8250_port_ops; 401 402 static const struct uart_8250_ops univ8250_driver_ops = { 403 .setup_irq = univ8250_setup_irq, 404 .release_irq = univ8250_release_irq, 405 }; 406 407 static struct uart_8250_port serial8250_ports[UART_NR]; 408 409 /** 410 * serial8250_get_port - retrieve struct uart_8250_port 411 * @line: serial line number 412 * 413 * This function retrieves struct uart_8250_port for the specific line. 414 * This struct *must* *not* be used to perform a 8250 or serial core operation 415 * which is not accessible otherwise. Its only purpose is to make the struct 416 * accessible to the runtime-pm callbacks for context suspend/restore. 417 * The lock assumption made here is none because runtime-pm suspend/resume 418 * callbacks should not be invoked if there is any operation performed on the 419 * port. 420 */ 421 struct uart_8250_port *serial8250_get_port(int line) 422 { 423 return &serial8250_ports[line]; 424 } 425 EXPORT_SYMBOL_GPL(serial8250_get_port); 426 427 static void (*serial8250_isa_config)(int port, struct uart_port *up, 428 unsigned short *capabilities); 429 430 void serial8250_set_isa_configurator( 431 void (*v)(int port, struct uart_port *up, unsigned short *capabilities)) 432 { 433 serial8250_isa_config = v; 434 } 435 EXPORT_SYMBOL(serial8250_set_isa_configurator); 436 437 #ifdef CONFIG_SERIAL_8250_RSA 438 439 static void univ8250_config_port(struct uart_port *port, int flags) 440 { 441 struct uart_8250_port *up = up_to_u8250p(port); 442 443 up->probe &= ~UART_PROBE_RSA; 444 if (port->type == PORT_RSA) { 445 if (serial8250_request_rsa_resource(up) == 0) 446 up->probe |= UART_PROBE_RSA; 447 } else if (flags & UART_CONFIG_TYPE) { 448 int i; 449 450 for (i = 0; i < probe_rsa_count; i++) { 451 if (probe_rsa[i] == up->port.iobase) { 452 if (serial8250_request_rsa_resource(up) == 0) 453 up->probe |= UART_PROBE_RSA; 454 break; 455 } 456 } 457 } 458 459 base_ops->config_port(port, flags); 460 461 if (port->type != PORT_RSA && up->probe & UART_PROBE_RSA) 462 serial8250_release_rsa_resource(up); 463 } 464 465 static int univ8250_request_port(struct uart_port *port) 466 { 467 struct uart_8250_port *up = up_to_u8250p(port); 468 int ret; 469 470 ret = base_ops->request_port(port); 471 if (ret == 0 && port->type == PORT_RSA) { 472 ret = serial8250_request_rsa_resource(up); 473 if (ret < 0) 474 base_ops->release_port(port); 475 } 476 477 return ret; 478 } 479 480 static void univ8250_release_port(struct uart_port *port) 481 { 482 struct uart_8250_port *up = up_to_u8250p(port); 483 484 if (port->type == PORT_RSA) 485 serial8250_release_rsa_resource(up); 486 base_ops->release_port(port); 487 } 488 489 static void univ8250_rsa_support(struct uart_ops *ops) 490 { 491 ops->config_port = univ8250_config_port; 492 ops->request_port = univ8250_request_port; 493 ops->release_port = univ8250_release_port; 494 } 495 496 #else 497 #define univ8250_rsa_support(x) do { } while (0) 498 #endif /* CONFIG_SERIAL_8250_RSA */ 499 500 static void __init serial8250_isa_init_ports(void) 501 { 502 struct uart_8250_port *up; 503 static int first = 1; 504 int i, irqflag = 0; 505 506 if (!first) 507 return; 508 first = 0; 509 510 if (nr_uarts > UART_NR) 511 nr_uarts = UART_NR; 512 513 for (i = 0; i < nr_uarts; i++) { 514 struct uart_8250_port *up = &serial8250_ports[i]; 515 struct uart_port *port = &up->port; 516 517 port->line = i; 518 serial8250_init_port(up); 519 if (!base_ops) 520 base_ops = port->ops; 521 port->ops = &univ8250_port_ops; 522 523 init_timer(&up->timer); 524 up->timer.function = serial8250_timeout; 525 526 up->ops = &univ8250_driver_ops; 527 528 /* 529 * ALPHA_KLUDGE_MCR needs to be killed. 530 */ 531 up->mcr_mask = ~ALPHA_KLUDGE_MCR; 532 up->mcr_force = ALPHA_KLUDGE_MCR; 533 } 534 535 /* chain base port ops to support Remote Supervisor Adapter */ 536 univ8250_port_ops = *base_ops; 537 univ8250_rsa_support(&univ8250_port_ops); 538 539 if (share_irqs) 540 irqflag = IRQF_SHARED; 541 542 for (i = 0, up = serial8250_ports; 543 i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; 544 i++, up++) { 545 struct uart_port *port = &up->port; 546 547 port->iobase = old_serial_port[i].port; 548 port->irq = irq_canonicalize(old_serial_port[i].irq); 549 port->irqflags = old_serial_port[i].irqflags; 550 port->uartclk = old_serial_port[i].baud_base * 16; 551 port->flags = old_serial_port[i].flags; 552 port->hub6 = old_serial_port[i].hub6; 553 port->membase = old_serial_port[i].iomem_base; 554 port->iotype = old_serial_port[i].io_type; 555 port->regshift = old_serial_port[i].iomem_reg_shift; 556 serial8250_set_defaults(up); 557 558 port->irqflags |= irqflag; 559 if (serial8250_isa_config != NULL) 560 serial8250_isa_config(i, &up->port, &up->capabilities); 561 } 562 } 563 564 static void __init 565 serial8250_register_ports(struct uart_driver *drv, struct device *dev) 566 { 567 int i; 568 569 for (i = 0; i < nr_uarts; i++) { 570 struct uart_8250_port *up = &serial8250_ports[i]; 571 572 if (up->port.type == PORT_8250_CIR) 573 continue; 574 575 if (up->port.dev) 576 continue; 577 578 up->port.dev = dev; 579 580 if (skip_txen_test) 581 up->port.flags |= UPF_NO_TXEN_TEST; 582 583 uart_add_one_port(drv, &up->port); 584 } 585 } 586 587 #ifdef CONFIG_SERIAL_8250_CONSOLE 588 589 static void univ8250_console_write(struct console *co, const char *s, 590 unsigned int count) 591 { 592 struct uart_8250_port *up = &serial8250_ports[co->index]; 593 594 serial8250_console_write(up, s, count); 595 } 596 597 static int univ8250_console_setup(struct console *co, char *options) 598 { 599 struct uart_port *port; 600 601 /* 602 * Check whether an invalid uart number has been specified, and 603 * if so, search for the first available port that does have 604 * console support. 605 */ 606 if (co->index >= nr_uarts) 607 co->index = 0; 608 port = &serial8250_ports[co->index].port; 609 /* link port to console */ 610 port->cons = co; 611 612 return serial8250_console_setup(port, options, false); 613 } 614 615 /** 616 * univ8250_console_match - non-standard console matching 617 * @co: registering console 618 * @name: name from console command line 619 * @idx: index from console command line 620 * @options: ptr to option string from console command line 621 * 622 * Only attempts to match console command lines of the form: 623 * console=uart[8250],io|mmio|mmio16|mmio32,<addr>[,<options>] 624 * console=uart[8250],0x<addr>[,<options>] 625 * This form is used to register an initial earlycon boot console and 626 * replace it with the serial8250_console at 8250 driver init. 627 * 628 * Performs console setup for a match (as required by interface) 629 * If no <options> are specified, then assume the h/w is already setup. 630 * 631 * Returns 0 if console matches; otherwise non-zero to use default matching 632 */ 633 static int univ8250_console_match(struct console *co, char *name, int idx, 634 char *options) 635 { 636 char match[] = "uart"; /* 8250-specific earlycon name */ 637 unsigned char iotype; 638 unsigned long addr; 639 int i; 640 641 if (strncmp(name, match, 4) != 0) 642 return -ENODEV; 643 644 if (uart_parse_earlycon(options, &iotype, &addr, &options)) 645 return -ENODEV; 646 647 /* try to match the port specified on the command line */ 648 for (i = 0; i < nr_uarts; i++) { 649 struct uart_port *port = &serial8250_ports[i].port; 650 651 if (port->iotype != iotype) 652 continue; 653 if ((iotype == UPIO_MEM || iotype == UPIO_MEM16 || 654 iotype == UPIO_MEM32 || iotype == UPIO_MEM32BE) 655 && (port->mapbase != addr)) 656 continue; 657 if (iotype == UPIO_PORT && port->iobase != addr) 658 continue; 659 660 co->index = i; 661 port->cons = co; 662 return serial8250_console_setup(port, options, true); 663 } 664 665 return -ENODEV; 666 } 667 668 static struct console univ8250_console = { 669 .name = "ttyS", 670 .write = univ8250_console_write, 671 .device = uart_console_device, 672 .setup = univ8250_console_setup, 673 .match = univ8250_console_match, 674 .flags = CON_PRINTBUFFER | CON_ANYTIME, 675 .index = -1, 676 .data = &serial8250_reg, 677 }; 678 679 static int __init univ8250_console_init(void) 680 { 681 if (nr_uarts == 0) 682 return -ENODEV; 683 684 serial8250_isa_init_ports(); 685 register_console(&univ8250_console); 686 return 0; 687 } 688 console_initcall(univ8250_console_init); 689 690 #define SERIAL8250_CONSOLE &univ8250_console 691 #else 692 #define SERIAL8250_CONSOLE NULL 693 #endif 694 695 static struct uart_driver serial8250_reg = { 696 .owner = THIS_MODULE, 697 .driver_name = "serial", 698 .dev_name = "ttyS", 699 .major = TTY_MAJOR, 700 .minor = 64, 701 .cons = SERIAL8250_CONSOLE, 702 }; 703 704 /* 705 * early_serial_setup - early registration for 8250 ports 706 * 707 * Setup an 8250 port structure prior to console initialisation. Use 708 * after console initialisation will cause undefined behaviour. 709 */ 710 int __init early_serial_setup(struct uart_port *port) 711 { 712 struct uart_port *p; 713 714 if (port->line >= ARRAY_SIZE(serial8250_ports) || nr_uarts == 0) 715 return -ENODEV; 716 717 serial8250_isa_init_ports(); 718 p = &serial8250_ports[port->line].port; 719 p->iobase = port->iobase; 720 p->membase = port->membase; 721 p->irq = port->irq; 722 p->irqflags = port->irqflags; 723 p->uartclk = port->uartclk; 724 p->fifosize = port->fifosize; 725 p->regshift = port->regshift; 726 p->iotype = port->iotype; 727 p->flags = port->flags; 728 p->mapbase = port->mapbase; 729 p->mapsize = port->mapsize; 730 p->private_data = port->private_data; 731 p->type = port->type; 732 p->line = port->line; 733 734 serial8250_set_defaults(up_to_u8250p(p)); 735 736 if (port->serial_in) 737 p->serial_in = port->serial_in; 738 if (port->serial_out) 739 p->serial_out = port->serial_out; 740 if (port->handle_irq) 741 p->handle_irq = port->handle_irq; 742 743 return 0; 744 } 745 746 /** 747 * serial8250_suspend_port - suspend one serial port 748 * @line: serial line number 749 * 750 * Suspend one serial port. 751 */ 752 void serial8250_suspend_port(int line) 753 { 754 struct uart_8250_port *up = &serial8250_ports[line]; 755 struct uart_port *port = &up->port; 756 757 if (!console_suspend_enabled && uart_console(port) && 758 port->type != PORT_8250) { 759 unsigned char canary = 0xa5; 760 serial_out(up, UART_SCR, canary); 761 if (serial_in(up, UART_SCR) == canary) 762 up->canary = canary; 763 } 764 765 uart_suspend_port(&serial8250_reg, port); 766 } 767 768 /** 769 * serial8250_resume_port - resume one serial port 770 * @line: serial line number 771 * 772 * Resume one serial port. 773 */ 774 void serial8250_resume_port(int line) 775 { 776 struct uart_8250_port *up = &serial8250_ports[line]; 777 struct uart_port *port = &up->port; 778 779 up->canary = 0; 780 781 if (up->capabilities & UART_NATSEMI) { 782 /* Ensure it's still in high speed mode */ 783 serial_port_out(port, UART_LCR, 0xE0); 784 785 ns16550a_goto_highspeed(up); 786 787 serial_port_out(port, UART_LCR, 0); 788 port->uartclk = 921600*16; 789 } 790 uart_resume_port(&serial8250_reg, port); 791 } 792 793 /* 794 * Register a set of serial devices attached to a platform device. The 795 * list is terminated with a zero flags entry, which means we expect 796 * all entries to have at least UPF_BOOT_AUTOCONF set. 797 */ 798 static int serial8250_probe(struct platform_device *dev) 799 { 800 struct plat_serial8250_port *p = dev_get_platdata(&dev->dev); 801 struct uart_8250_port uart; 802 int ret, i, irqflag = 0; 803 804 memset(&uart, 0, sizeof(uart)); 805 806 if (share_irqs) 807 irqflag = IRQF_SHARED; 808 809 for (i = 0; p && p->flags != 0; p++, i++) { 810 uart.port.iobase = p->iobase; 811 uart.port.membase = p->membase; 812 uart.port.irq = p->irq; 813 uart.port.irqflags = p->irqflags; 814 uart.port.uartclk = p->uartclk; 815 uart.port.regshift = p->regshift; 816 uart.port.iotype = p->iotype; 817 uart.port.flags = p->flags; 818 uart.port.mapbase = p->mapbase; 819 uart.port.hub6 = p->hub6; 820 uart.port.private_data = p->private_data; 821 uart.port.type = p->type; 822 uart.port.serial_in = p->serial_in; 823 uart.port.serial_out = p->serial_out; 824 uart.port.handle_irq = p->handle_irq; 825 uart.port.handle_break = p->handle_break; 826 uart.port.set_termios = p->set_termios; 827 uart.port.pm = p->pm; 828 uart.port.dev = &dev->dev; 829 uart.port.irqflags |= irqflag; 830 ret = serial8250_register_8250_port(&uart); 831 if (ret < 0) { 832 dev_err(&dev->dev, "unable to register port at index %d " 833 "(IO%lx MEM%llx IRQ%d): %d\n", i, 834 p->iobase, (unsigned long long)p->mapbase, 835 p->irq, ret); 836 } 837 } 838 return 0; 839 } 840 841 /* 842 * Remove serial ports registered against a platform device. 843 */ 844 static int serial8250_remove(struct platform_device *dev) 845 { 846 int i; 847 848 for (i = 0; i < nr_uarts; i++) { 849 struct uart_8250_port *up = &serial8250_ports[i]; 850 851 if (up->port.dev == &dev->dev) 852 serial8250_unregister_port(i); 853 } 854 return 0; 855 } 856 857 static int serial8250_suspend(struct platform_device *dev, pm_message_t state) 858 { 859 int i; 860 861 for (i = 0; i < UART_NR; i++) { 862 struct uart_8250_port *up = &serial8250_ports[i]; 863 864 if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) 865 uart_suspend_port(&serial8250_reg, &up->port); 866 } 867 868 return 0; 869 } 870 871 static int serial8250_resume(struct platform_device *dev) 872 { 873 int i; 874 875 for (i = 0; i < UART_NR; i++) { 876 struct uart_8250_port *up = &serial8250_ports[i]; 877 878 if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) 879 serial8250_resume_port(i); 880 } 881 882 return 0; 883 } 884 885 static struct platform_driver serial8250_isa_driver = { 886 .probe = serial8250_probe, 887 .remove = serial8250_remove, 888 .suspend = serial8250_suspend, 889 .resume = serial8250_resume, 890 .driver = { 891 .name = "serial8250", 892 }, 893 }; 894 895 /* 896 * This "device" covers _all_ ISA 8250-compatible serial devices listed 897 * in the table in include/asm/serial.h 898 */ 899 static struct platform_device *serial8250_isa_devs; 900 901 /* 902 * serial8250_register_8250_port and serial8250_unregister_port allows for 903 * 16x50 serial ports to be configured at run-time, to support PCMCIA 904 * modems and PCI multiport cards. 905 */ 906 static DEFINE_MUTEX(serial_mutex); 907 908 static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port) 909 { 910 int i; 911 912 /* 913 * First, find a port entry which matches. 914 */ 915 for (i = 0; i < nr_uarts; i++) 916 if (uart_match_port(&serial8250_ports[i].port, port)) 917 return &serial8250_ports[i]; 918 919 /* try line number first if still available */ 920 i = port->line; 921 if (i < nr_uarts && serial8250_ports[i].port.type == PORT_UNKNOWN && 922 serial8250_ports[i].port.iobase == 0) 923 return &serial8250_ports[i]; 924 /* 925 * We didn't find a matching entry, so look for the first 926 * free entry. We look for one which hasn't been previously 927 * used (indicated by zero iobase). 928 */ 929 for (i = 0; i < nr_uarts; i++) 930 if (serial8250_ports[i].port.type == PORT_UNKNOWN && 931 serial8250_ports[i].port.iobase == 0) 932 return &serial8250_ports[i]; 933 934 /* 935 * That also failed. Last resort is to find any entry which 936 * doesn't have a real port associated with it. 937 */ 938 for (i = 0; i < nr_uarts; i++) 939 if (serial8250_ports[i].port.type == PORT_UNKNOWN) 940 return &serial8250_ports[i]; 941 942 return NULL; 943 } 944 945 /** 946 * serial8250_register_8250_port - register a serial port 947 * @up: serial port template 948 * 949 * Configure the serial port specified by the request. If the 950 * port exists and is in use, it is hung up and unregistered 951 * first. 952 * 953 * The port is then probed and if necessary the IRQ is autodetected 954 * If this fails an error is returned. 955 * 956 * On success the port is ready to use and the line number is returned. 957 */ 958 int serial8250_register_8250_port(struct uart_8250_port *up) 959 { 960 struct uart_8250_port *uart; 961 int ret = -ENOSPC; 962 963 if (up->port.uartclk == 0) 964 return -EINVAL; 965 966 mutex_lock(&serial_mutex); 967 968 uart = serial8250_find_match_or_unused(&up->port); 969 if (uart && uart->port.type != PORT_8250_CIR) { 970 if (uart->port.dev) 971 uart_remove_one_port(&serial8250_reg, &uart->port); 972 973 uart->port.iobase = up->port.iobase; 974 uart->port.membase = up->port.membase; 975 uart->port.irq = up->port.irq; 976 uart->port.irqflags = up->port.irqflags; 977 uart->port.uartclk = up->port.uartclk; 978 uart->port.fifosize = up->port.fifosize; 979 uart->port.regshift = up->port.regshift; 980 uart->port.iotype = up->port.iotype; 981 uart->port.flags = up->port.flags | UPF_BOOT_AUTOCONF; 982 uart->bugs = up->bugs; 983 uart->port.mapbase = up->port.mapbase; 984 uart->port.mapsize = up->port.mapsize; 985 uart->port.private_data = up->port.private_data; 986 uart->tx_loadsz = up->tx_loadsz; 987 uart->capabilities = up->capabilities; 988 uart->port.throttle = up->port.throttle; 989 uart->port.unthrottle = up->port.unthrottle; 990 uart->port.rs485_config = up->port.rs485_config; 991 uart->port.rs485 = up->port.rs485; 992 uart->dma = up->dma; 993 994 /* Take tx_loadsz from fifosize if it wasn't set separately */ 995 if (uart->port.fifosize && !uart->tx_loadsz) 996 uart->tx_loadsz = uart->port.fifosize; 997 998 if (up->port.dev) 999 uart->port.dev = up->port.dev; 1000 1001 if (skip_txen_test) 1002 uart->port.flags |= UPF_NO_TXEN_TEST; 1003 1004 if (up->port.flags & UPF_FIXED_TYPE) 1005 uart->port.type = up->port.type; 1006 1007 serial8250_set_defaults(uart); 1008 1009 /* Possibly override default I/O functions. */ 1010 if (up->port.serial_in) 1011 uart->port.serial_in = up->port.serial_in; 1012 if (up->port.serial_out) 1013 uart->port.serial_out = up->port.serial_out; 1014 if (up->port.handle_irq) 1015 uart->port.handle_irq = up->port.handle_irq; 1016 /* Possibly override set_termios call */ 1017 if (up->port.set_termios) 1018 uart->port.set_termios = up->port.set_termios; 1019 if (up->port.set_mctrl) 1020 uart->port.set_mctrl = up->port.set_mctrl; 1021 if (up->port.startup) 1022 uart->port.startup = up->port.startup; 1023 if (up->port.shutdown) 1024 uart->port.shutdown = up->port.shutdown; 1025 if (up->port.pm) 1026 uart->port.pm = up->port.pm; 1027 if (up->port.handle_break) 1028 uart->port.handle_break = up->port.handle_break; 1029 if (up->dl_read) 1030 uart->dl_read = up->dl_read; 1031 if (up->dl_write) 1032 uart->dl_write = up->dl_write; 1033 1034 if (uart->port.type != PORT_8250_CIR) { 1035 if (serial8250_isa_config != NULL) 1036 serial8250_isa_config(0, &uart->port, 1037 &uart->capabilities); 1038 1039 ret = uart_add_one_port(&serial8250_reg, 1040 &uart->port); 1041 if (ret == 0) 1042 ret = uart->port.line; 1043 } else { 1044 dev_info(uart->port.dev, 1045 "skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n", 1046 uart->port.iobase, 1047 (unsigned long long)uart->port.mapbase, 1048 uart->port.irq); 1049 1050 ret = 0; 1051 } 1052 } 1053 mutex_unlock(&serial_mutex); 1054 1055 return ret; 1056 } 1057 EXPORT_SYMBOL(serial8250_register_8250_port); 1058 1059 /** 1060 * serial8250_unregister_port - remove a 16x50 serial port at runtime 1061 * @line: serial line number 1062 * 1063 * Remove one serial port. This may not be called from interrupt 1064 * context. We hand the port back to the our control. 1065 */ 1066 void serial8250_unregister_port(int line) 1067 { 1068 struct uart_8250_port *uart = &serial8250_ports[line]; 1069 1070 mutex_lock(&serial_mutex); 1071 uart_remove_one_port(&serial8250_reg, &uart->port); 1072 if (serial8250_isa_devs) { 1073 uart->port.flags &= ~UPF_BOOT_AUTOCONF; 1074 if (skip_txen_test) 1075 uart->port.flags |= UPF_NO_TXEN_TEST; 1076 uart->port.type = PORT_UNKNOWN; 1077 uart->port.dev = &serial8250_isa_devs->dev; 1078 uart->capabilities = 0; 1079 uart_add_one_port(&serial8250_reg, &uart->port); 1080 } else { 1081 uart->port.dev = NULL; 1082 } 1083 mutex_unlock(&serial_mutex); 1084 } 1085 EXPORT_SYMBOL(serial8250_unregister_port); 1086 1087 static int __init serial8250_init(void) 1088 { 1089 int ret; 1090 1091 if (nr_uarts == 0) 1092 return -ENODEV; 1093 1094 serial8250_isa_init_ports(); 1095 1096 printk(KERN_INFO "Serial: 8250/16550 driver, " 1097 "%d ports, IRQ sharing %sabled\n", nr_uarts, 1098 share_irqs ? "en" : "dis"); 1099 1100 #ifdef CONFIG_SPARC 1101 ret = sunserial_register_minors(&serial8250_reg, UART_NR); 1102 #else 1103 serial8250_reg.nr = UART_NR; 1104 ret = uart_register_driver(&serial8250_reg); 1105 #endif 1106 if (ret) 1107 goto out; 1108 1109 ret = serial8250_pnp_init(); 1110 if (ret) 1111 goto unreg_uart_drv; 1112 1113 serial8250_isa_devs = platform_device_alloc("serial8250", 1114 PLAT8250_DEV_LEGACY); 1115 if (!serial8250_isa_devs) { 1116 ret = -ENOMEM; 1117 goto unreg_pnp; 1118 } 1119 1120 ret = platform_device_add(serial8250_isa_devs); 1121 if (ret) 1122 goto put_dev; 1123 1124 serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev); 1125 1126 ret = platform_driver_register(&serial8250_isa_driver); 1127 if (ret == 0) 1128 goto out; 1129 1130 platform_device_del(serial8250_isa_devs); 1131 put_dev: 1132 platform_device_put(serial8250_isa_devs); 1133 unreg_pnp: 1134 serial8250_pnp_exit(); 1135 unreg_uart_drv: 1136 #ifdef CONFIG_SPARC 1137 sunserial_unregister_minors(&serial8250_reg, UART_NR); 1138 #else 1139 uart_unregister_driver(&serial8250_reg); 1140 #endif 1141 out: 1142 return ret; 1143 } 1144 1145 static void __exit serial8250_exit(void) 1146 { 1147 struct platform_device *isa_dev = serial8250_isa_devs; 1148 1149 /* 1150 * This tells serial8250_unregister_port() not to re-register 1151 * the ports (thereby making serial8250_isa_driver permanently 1152 * in use.) 1153 */ 1154 serial8250_isa_devs = NULL; 1155 1156 platform_driver_unregister(&serial8250_isa_driver); 1157 platform_device_unregister(isa_dev); 1158 1159 serial8250_pnp_exit(); 1160 1161 #ifdef CONFIG_SPARC 1162 sunserial_unregister_minors(&serial8250_reg, UART_NR); 1163 #else 1164 uart_unregister_driver(&serial8250_reg); 1165 #endif 1166 } 1167 1168 module_init(serial8250_init); 1169 module_exit(serial8250_exit); 1170 1171 EXPORT_SYMBOL(serial8250_suspend_port); 1172 EXPORT_SYMBOL(serial8250_resume_port); 1173 1174 MODULE_LICENSE("GPL"); 1175 MODULE_DESCRIPTION("Generic 8250/16x50 serial driver"); 1176 1177 module_param(share_irqs, uint, 0644); 1178 MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices" 1179 " (unsafe)"); 1180 1181 module_param(nr_uarts, uint, 0644); 1182 MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")"); 1183 1184 module_param(skip_txen_test, uint, 0644); 1185 MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time"); 1186 1187 #ifdef CONFIG_SERIAL_8250_RSA 1188 module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444); 1189 MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); 1190 #endif 1191 MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); 1192 1193 #ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS 1194 #ifndef MODULE 1195 /* This module was renamed to 8250_core in 3.7. Keep the old "8250" name 1196 * working as well for the module options so we don't break people. We 1197 * need to keep the names identical and the convenient macros will happily 1198 * refuse to let us do that by failing the build with redefinition errors 1199 * of global variables. So we stick them inside a dummy function to avoid 1200 * those conflicts. The options still get parsed, and the redefined 1201 * MODULE_PARAM_PREFIX lets us keep the "8250." syntax alive. 1202 * 1203 * This is hacky. I'm sorry. 1204 */ 1205 static void __used s8250_options(void) 1206 { 1207 #undef MODULE_PARAM_PREFIX 1208 #define MODULE_PARAM_PREFIX "8250_core." 1209 1210 module_param_cb(share_irqs, ¶m_ops_uint, &share_irqs, 0644); 1211 module_param_cb(nr_uarts, ¶m_ops_uint, &nr_uarts, 0644); 1212 module_param_cb(skip_txen_test, ¶m_ops_uint, &skip_txen_test, 0644); 1213 #ifdef CONFIG_SERIAL_8250_RSA 1214 __module_param_call(MODULE_PARAM_PREFIX, probe_rsa, 1215 ¶m_array_ops, .arr = &__param_arr_probe_rsa, 1216 0444, -1, 0); 1217 #endif 1218 } 1219 #else 1220 MODULE_ALIAS("8250_core"); 1221 #endif 1222 #endif 1223