1 /* 2 * Driver for 8250/16550-type serial ports 3 * 4 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. 5 * 6 * Copyright (C) 2001 Russell King. 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or 11 * (at your option) any later version. 12 */ 13 14 #include <linux/serial_8250.h> 15 16 struct uart_8250_port { 17 struct uart_port port; 18 struct timer_list timer; /* "no irq" timer */ 19 struct list_head list; /* ports on this IRQ */ 20 unsigned short capabilities; /* port capabilities */ 21 unsigned short bugs; /* port bugs */ 22 unsigned int tx_loadsz; /* transmit fifo load size */ 23 unsigned char acr; 24 unsigned char ier; 25 unsigned char lcr; 26 unsigned char mcr; 27 unsigned char mcr_mask; /* mask of user bits */ 28 unsigned char mcr_force; /* mask of forced bits */ 29 unsigned char cur_iotype; /* Running I/O type */ 30 31 /* 32 * Some bits in registers are cleared on a read, so they must 33 * be saved whenever the register is read but the bits will not 34 * be immediately processed. 35 */ 36 #define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS 37 unsigned char lsr_saved_flags; 38 #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA 39 unsigned char msr_saved_flags; 40 }; 41 42 struct old_serial_port { 43 unsigned int uart; 44 unsigned int baud_base; 45 unsigned int port; 46 unsigned int irq; 47 unsigned int flags; 48 unsigned char hub6; 49 unsigned char io_type; 50 unsigned char *iomem_base; 51 unsigned short iomem_reg_shift; 52 unsigned long irqflags; 53 }; 54 55 /* 56 * This replaces serial_uart_config in include/linux/serial.h 57 */ 58 struct serial8250_config { 59 const char *name; 60 unsigned short fifo_size; 61 unsigned short tx_loadsz; 62 unsigned char fcr; 63 unsigned int flags; 64 }; 65 66 #define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ 67 #define UART_CAP_EFR (1 << 9) /* UART has EFR */ 68 #define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */ 69 #define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ 70 #define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ 71 #define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */ 72 73 #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ 74 #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ 75 #define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */ 76 #define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */ 77 78 #define PROBE_RSA (1 << 0) 79 #define PROBE_ANY (~0) 80 81 #define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) 82 83 #ifdef CONFIG_SERIAL_8250_SHARE_IRQ 84 #define SERIAL8250_SHARE_IRQS 1 85 #else 86 #define SERIAL8250_SHARE_IRQS 0 87 #endif 88 89 static inline int serial_in(struct uart_8250_port *up, int offset) 90 { 91 return up->port.serial_in(&up->port, offset); 92 } 93 94 static inline void serial_out(struct uart_8250_port *up, int offset, int value) 95 { 96 up->port.serial_out(&up->port, offset, value); 97 } 98 99 #if defined(__alpha__) && !defined(CONFIG_PCI) 100 /* 101 * Digital did something really horribly wrong with the OUT1 and OUT2 102 * lines on at least some ALPHA's. The failure mode is that if either 103 * is cleared, the machine locks up with endless interrupts. 104 */ 105 #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1) 106 #elif defined(CONFIG_SBC8560) 107 /* 108 * WindRiver did something similarly broken on their SBC8560 board. The 109 * UART tristates its IRQ output while OUT2 is clear, but they pulled 110 * the interrupt line _up_ instead of down, so if we register the IRQ 111 * while the UART is in that state, we die in an IRQ storm. */ 112 #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2) 113 #else 114 #define ALPHA_KLUDGE_MCR 0 115 #endif 116