1 /* 2 * Driver for the serial port on the 21285 StrongArm-110 core logic chip. 3 * 4 * Based on drivers/char/serial.c 5 */ 6 #include <linux/module.h> 7 #include <linux/tty.h> 8 #include <linux/ioport.h> 9 #include <linux/init.h> 10 #include <linux/console.h> 11 #include <linux/device.h> 12 #include <linux/tty_flip.h> 13 #include <linux/serial_core.h> 14 #include <linux/serial.h> 15 #include <linux/io.h> 16 17 #include <asm/irq.h> 18 #include <asm/mach-types.h> 19 #include <asm/hardware/dec21285.h> 20 #include <mach/hardware.h> 21 22 #define BAUD_BASE (mem_fclk_21285/64) 23 24 #define SERIAL_21285_NAME "ttyFB" 25 #define SERIAL_21285_MAJOR 204 26 #define SERIAL_21285_MINOR 4 27 28 #define RXSTAT_DUMMY_READ 0x80000000 29 #define RXSTAT_FRAME (1 << 0) 30 #define RXSTAT_PARITY (1 << 1) 31 #define RXSTAT_OVERRUN (1 << 2) 32 #define RXSTAT_ANYERR (RXSTAT_FRAME|RXSTAT_PARITY|RXSTAT_OVERRUN) 33 34 #define H_UBRLCR_BREAK (1 << 0) 35 #define H_UBRLCR_PARENB (1 << 1) 36 #define H_UBRLCR_PAREVN (1 << 2) 37 #define H_UBRLCR_STOPB (1 << 3) 38 #define H_UBRLCR_FIFO (1 << 4) 39 40 static const char serial21285_name[] = "Footbridge UART"; 41 42 #define tx_enabled(port) ((port)->unused[0]) 43 #define rx_enabled(port) ((port)->unused[1]) 44 45 /* 46 * The documented expression for selecting the divisor is: 47 * BAUD_BASE / baud - 1 48 * However, typically BAUD_BASE is not divisible by baud, so 49 * we want to select the divisor that gives us the minimum 50 * error. Therefore, we want: 51 * int(BAUD_BASE / baud - 0.5) -> 52 * int(BAUD_BASE / baud - (baud >> 1) / baud) -> 53 * int((BAUD_BASE - (baud >> 1)) / baud) 54 */ 55 56 static void serial21285_stop_tx(struct uart_port *port) 57 { 58 if (tx_enabled(port)) { 59 disable_irq_nosync(IRQ_CONTX); 60 tx_enabled(port) = 0; 61 } 62 } 63 64 static void serial21285_start_tx(struct uart_port *port) 65 { 66 if (!tx_enabled(port)) { 67 enable_irq(IRQ_CONTX); 68 tx_enabled(port) = 1; 69 } 70 } 71 72 static void serial21285_stop_rx(struct uart_port *port) 73 { 74 if (rx_enabled(port)) { 75 disable_irq_nosync(IRQ_CONRX); 76 rx_enabled(port) = 0; 77 } 78 } 79 80 static void serial21285_enable_ms(struct uart_port *port) 81 { 82 } 83 84 static irqreturn_t serial21285_rx_chars(int irq, void *dev_id) 85 { 86 struct uart_port *port = dev_id; 87 struct tty_struct *tty = port->state->port.tty; 88 unsigned int status, ch, flag, rxs, max_count = 256; 89 90 status = *CSR_UARTFLG; 91 while (!(status & 0x10) && max_count--) { 92 ch = *CSR_UARTDR; 93 flag = TTY_NORMAL; 94 port->icount.rx++; 95 96 rxs = *CSR_RXSTAT | RXSTAT_DUMMY_READ; 97 if (unlikely(rxs & RXSTAT_ANYERR)) { 98 if (rxs & RXSTAT_PARITY) 99 port->icount.parity++; 100 else if (rxs & RXSTAT_FRAME) 101 port->icount.frame++; 102 if (rxs & RXSTAT_OVERRUN) 103 port->icount.overrun++; 104 105 rxs &= port->read_status_mask; 106 107 if (rxs & RXSTAT_PARITY) 108 flag = TTY_PARITY; 109 else if (rxs & RXSTAT_FRAME) 110 flag = TTY_FRAME; 111 } 112 113 uart_insert_char(port, rxs, RXSTAT_OVERRUN, ch, flag); 114 115 status = *CSR_UARTFLG; 116 } 117 tty_flip_buffer_push(tty); 118 119 return IRQ_HANDLED; 120 } 121 122 static irqreturn_t serial21285_tx_chars(int irq, void *dev_id) 123 { 124 struct uart_port *port = dev_id; 125 struct circ_buf *xmit = &port->state->xmit; 126 int count = 256; 127 128 if (port->x_char) { 129 *CSR_UARTDR = port->x_char; 130 port->icount.tx++; 131 port->x_char = 0; 132 goto out; 133 } 134 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { 135 serial21285_stop_tx(port); 136 goto out; 137 } 138 139 do { 140 *CSR_UARTDR = xmit->buf[xmit->tail]; 141 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); 142 port->icount.tx++; 143 if (uart_circ_empty(xmit)) 144 break; 145 } while (--count > 0 && !(*CSR_UARTFLG & 0x20)); 146 147 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 148 uart_write_wakeup(port); 149 150 if (uart_circ_empty(xmit)) 151 serial21285_stop_tx(port); 152 153 out: 154 return IRQ_HANDLED; 155 } 156 157 static unsigned int serial21285_tx_empty(struct uart_port *port) 158 { 159 return (*CSR_UARTFLG & 8) ? 0 : TIOCSER_TEMT; 160 } 161 162 /* no modem control lines */ 163 static unsigned int serial21285_get_mctrl(struct uart_port *port) 164 { 165 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; 166 } 167 168 static void serial21285_set_mctrl(struct uart_port *port, unsigned int mctrl) 169 { 170 } 171 172 static void serial21285_break_ctl(struct uart_port *port, int break_state) 173 { 174 unsigned long flags; 175 unsigned int h_lcr; 176 177 spin_lock_irqsave(&port->lock, flags); 178 h_lcr = *CSR_H_UBRLCR; 179 if (break_state) 180 h_lcr |= H_UBRLCR_BREAK; 181 else 182 h_lcr &= ~H_UBRLCR_BREAK; 183 *CSR_H_UBRLCR = h_lcr; 184 spin_unlock_irqrestore(&port->lock, flags); 185 } 186 187 static int serial21285_startup(struct uart_port *port) 188 { 189 int ret; 190 191 tx_enabled(port) = 1; 192 rx_enabled(port) = 1; 193 194 ret = request_irq(IRQ_CONRX, serial21285_rx_chars, 0, 195 serial21285_name, port); 196 if (ret == 0) { 197 ret = request_irq(IRQ_CONTX, serial21285_tx_chars, 0, 198 serial21285_name, port); 199 if (ret) 200 free_irq(IRQ_CONRX, port); 201 } 202 203 return ret; 204 } 205 206 static void serial21285_shutdown(struct uart_port *port) 207 { 208 free_irq(IRQ_CONTX, port); 209 free_irq(IRQ_CONRX, port); 210 } 211 212 static void 213 serial21285_set_termios(struct uart_port *port, struct ktermios *termios, 214 struct ktermios *old) 215 { 216 unsigned long flags; 217 unsigned int baud, quot, h_lcr, b; 218 219 /* 220 * We don't support modem control lines. 221 */ 222 termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR); 223 termios->c_cflag |= CLOCAL; 224 225 /* 226 * We don't support BREAK character recognition. 227 */ 228 termios->c_iflag &= ~(IGNBRK | BRKINT); 229 230 /* 231 * Ask the core to calculate the divisor for us. 232 */ 233 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 234 quot = uart_get_divisor(port, baud); 235 b = port->uartclk / (16 * quot); 236 tty_termios_encode_baud_rate(termios, b, b); 237 238 switch (termios->c_cflag & CSIZE) { 239 case CS5: 240 h_lcr = 0x00; 241 break; 242 case CS6: 243 h_lcr = 0x20; 244 break; 245 case CS7: 246 h_lcr = 0x40; 247 break; 248 default: /* CS8 */ 249 h_lcr = 0x60; 250 break; 251 } 252 253 if (termios->c_cflag & CSTOPB) 254 h_lcr |= H_UBRLCR_STOPB; 255 if (termios->c_cflag & PARENB) { 256 h_lcr |= H_UBRLCR_PARENB; 257 if (!(termios->c_cflag & PARODD)) 258 h_lcr |= H_UBRLCR_PAREVN; 259 } 260 261 if (port->fifosize) 262 h_lcr |= H_UBRLCR_FIFO; 263 264 spin_lock_irqsave(&port->lock, flags); 265 266 /* 267 * Update the per-port timeout. 268 */ 269 uart_update_timeout(port, termios->c_cflag, baud); 270 271 /* 272 * Which character status flags are we interested in? 273 */ 274 port->read_status_mask = RXSTAT_OVERRUN; 275 if (termios->c_iflag & INPCK) 276 port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; 277 278 /* 279 * Which character status flags should we ignore? 280 */ 281 port->ignore_status_mask = 0; 282 if (termios->c_iflag & IGNPAR) 283 port->ignore_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; 284 if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) 285 port->ignore_status_mask |= RXSTAT_OVERRUN; 286 287 /* 288 * Ignore all characters if CREAD is not set. 289 */ 290 if ((termios->c_cflag & CREAD) == 0) 291 port->ignore_status_mask |= RXSTAT_DUMMY_READ; 292 293 quot -= 1; 294 295 *CSR_UARTCON = 0; 296 *CSR_L_UBRLCR = quot & 0xff; 297 *CSR_M_UBRLCR = (quot >> 8) & 0x0f; 298 *CSR_H_UBRLCR = h_lcr; 299 *CSR_UARTCON = 1; 300 301 spin_unlock_irqrestore(&port->lock, flags); 302 } 303 304 static const char *serial21285_type(struct uart_port *port) 305 { 306 return port->type == PORT_21285 ? "DC21285" : NULL; 307 } 308 309 static void serial21285_release_port(struct uart_port *port) 310 { 311 release_mem_region(port->mapbase, 32); 312 } 313 314 static int serial21285_request_port(struct uart_port *port) 315 { 316 return request_mem_region(port->mapbase, 32, serial21285_name) 317 != NULL ? 0 : -EBUSY; 318 } 319 320 static void serial21285_config_port(struct uart_port *port, int flags) 321 { 322 if (flags & UART_CONFIG_TYPE && serial21285_request_port(port) == 0) 323 port->type = PORT_21285; 324 } 325 326 /* 327 * verify the new serial_struct (for TIOCSSERIAL). 328 */ 329 static int serial21285_verify_port(struct uart_port *port, struct serial_struct *ser) 330 { 331 int ret = 0; 332 if (ser->type != PORT_UNKNOWN && ser->type != PORT_21285) 333 ret = -EINVAL; 334 if (ser->irq != NO_IRQ) 335 ret = -EINVAL; 336 if (ser->baud_base != port->uartclk / 16) 337 ret = -EINVAL; 338 return ret; 339 } 340 341 static struct uart_ops serial21285_ops = { 342 .tx_empty = serial21285_tx_empty, 343 .get_mctrl = serial21285_get_mctrl, 344 .set_mctrl = serial21285_set_mctrl, 345 .stop_tx = serial21285_stop_tx, 346 .start_tx = serial21285_start_tx, 347 .stop_rx = serial21285_stop_rx, 348 .enable_ms = serial21285_enable_ms, 349 .break_ctl = serial21285_break_ctl, 350 .startup = serial21285_startup, 351 .shutdown = serial21285_shutdown, 352 .set_termios = serial21285_set_termios, 353 .type = serial21285_type, 354 .release_port = serial21285_release_port, 355 .request_port = serial21285_request_port, 356 .config_port = serial21285_config_port, 357 .verify_port = serial21285_verify_port, 358 }; 359 360 static struct uart_port serial21285_port = { 361 .mapbase = 0x42000160, 362 .iotype = UPIO_MEM, 363 .irq = NO_IRQ, 364 .fifosize = 16, 365 .ops = &serial21285_ops, 366 .flags = UPF_BOOT_AUTOCONF, 367 }; 368 369 static void serial21285_setup_ports(void) 370 { 371 serial21285_port.uartclk = mem_fclk_21285 / 4; 372 } 373 374 #ifdef CONFIG_SERIAL_21285_CONSOLE 375 static void serial21285_console_putchar(struct uart_port *port, int ch) 376 { 377 while (*CSR_UARTFLG & 0x20) 378 barrier(); 379 *CSR_UARTDR = ch; 380 } 381 382 static void 383 serial21285_console_write(struct console *co, const char *s, 384 unsigned int count) 385 { 386 uart_console_write(&serial21285_port, s, count, serial21285_console_putchar); 387 } 388 389 static void __init 390 serial21285_get_options(struct uart_port *port, int *baud, 391 int *parity, int *bits) 392 { 393 if (*CSR_UARTCON == 1) { 394 unsigned int tmp; 395 396 tmp = *CSR_H_UBRLCR; 397 switch (tmp & 0x60) { 398 case 0x00: 399 *bits = 5; 400 break; 401 case 0x20: 402 *bits = 6; 403 break; 404 case 0x40: 405 *bits = 7; 406 break; 407 default: 408 case 0x60: 409 *bits = 8; 410 break; 411 } 412 413 if (tmp & H_UBRLCR_PARENB) { 414 *parity = 'o'; 415 if (tmp & H_UBRLCR_PAREVN) 416 *parity = 'e'; 417 } 418 419 tmp = *CSR_L_UBRLCR | (*CSR_M_UBRLCR << 8); 420 421 *baud = port->uartclk / (16 * (tmp + 1)); 422 } 423 } 424 425 static int __init serial21285_console_setup(struct console *co, char *options) 426 { 427 struct uart_port *port = &serial21285_port; 428 int baud = 9600; 429 int bits = 8; 430 int parity = 'n'; 431 int flow = 'n'; 432 433 if (machine_is_personal_server()) 434 baud = 57600; 435 436 /* 437 * Check whether an invalid uart number has been specified, and 438 * if so, search for the first available port that does have 439 * console support. 440 */ 441 if (options) 442 uart_parse_options(options, &baud, &parity, &bits, &flow); 443 else 444 serial21285_get_options(port, &baud, &parity, &bits); 445 446 return uart_set_options(port, co, baud, parity, bits, flow); 447 } 448 449 static struct uart_driver serial21285_reg; 450 451 static struct console serial21285_console = 452 { 453 .name = SERIAL_21285_NAME, 454 .write = serial21285_console_write, 455 .device = uart_console_device, 456 .setup = serial21285_console_setup, 457 .flags = CON_PRINTBUFFER, 458 .index = -1, 459 .data = &serial21285_reg, 460 }; 461 462 static int __init rs285_console_init(void) 463 { 464 serial21285_setup_ports(); 465 register_console(&serial21285_console); 466 return 0; 467 } 468 console_initcall(rs285_console_init); 469 470 #define SERIAL_21285_CONSOLE &serial21285_console 471 #else 472 #define SERIAL_21285_CONSOLE NULL 473 #endif 474 475 static struct uart_driver serial21285_reg = { 476 .owner = THIS_MODULE, 477 .driver_name = "ttyFB", 478 .dev_name = "ttyFB", 479 .major = SERIAL_21285_MAJOR, 480 .minor = SERIAL_21285_MINOR, 481 .nr = 1, 482 .cons = SERIAL_21285_CONSOLE, 483 }; 484 485 static int __init serial21285_init(void) 486 { 487 int ret; 488 489 printk(KERN_INFO "Serial: 21285 driver\n"); 490 491 serial21285_setup_ports(); 492 493 ret = uart_register_driver(&serial21285_reg); 494 if (ret == 0) 495 uart_add_one_port(&serial21285_reg, &serial21285_port); 496 497 return ret; 498 } 499 500 static void __exit serial21285_exit(void) 501 { 502 uart_remove_one_port(&serial21285_reg, &serial21285_port); 503 uart_unregister_driver(&serial21285_reg); 504 } 505 506 module_init(serial21285_init); 507 module_exit(serial21285_exit); 508 509 MODULE_LICENSE("GPL"); 510 MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver"); 511 MODULE_ALIAS_CHARDEV(SERIAL_21285_MAJOR, SERIAL_21285_MINOR); 512