xref: /openbmc/linux/drivers/tty/n_hdlc.c (revision df2634f43f5106947f3735a0b61a6527a4b278cd)
1 /* generic HDLC line discipline for Linux
2  *
3  * Written by Paul Fulghum paulkf@microgate.com
4  * for Microgate Corporation
5  *
6  * Microgate and SyncLink are registered trademarks of Microgate Corporation
7  *
8  * Adapted from ppp.c, written by Michael Callahan <callahan@maths.ox.ac.uk>,
9  *	Al Longyear <longyear@netcom.com>,
10  *	Paul Mackerras <Paul.Mackerras@cs.anu.edu.au>
11  *
12  * Original release 01/11/99
13  *
14  * This code is released under the GNU General Public License (GPL)
15  *
16  * This module implements the tty line discipline N_HDLC for use with
17  * tty device drivers that support bit-synchronous HDLC communications.
18  *
19  * All HDLC data is frame oriented which means:
20  *
21  * 1. tty write calls represent one complete transmit frame of data
22  *    The device driver should accept the complete frame or none of
23  *    the frame (busy) in the write method. Each write call should have
24  *    a byte count in the range of 2-65535 bytes (2 is min HDLC frame
25  *    with 1 addr byte and 1 ctrl byte). The max byte count of 65535
26  *    should include any crc bytes required. For example, when using
27  *    CCITT CRC32, 4 crc bytes are required, so the maximum size frame
28  *    the application may transmit is limited to 65531 bytes. For CCITT
29  *    CRC16, the maximum application frame size would be 65533.
30  *
31  *
32  * 2. receive callbacks from the device driver represents
33  *    one received frame. The device driver should bypass
34  *    the tty flip buffer and call the line discipline receive
35  *    callback directly to avoid fragmenting or concatenating
36  *    multiple frames into a single receive callback.
37  *
38  *    The HDLC line discipline queues the receive frames in separate
39  *    buffers so complete receive frames can be returned by the
40  *    tty read calls.
41  *
42  * 3. tty read calls returns an entire frame of data or nothing.
43  *
44  * 4. all send and receive data is considered raw. No processing
45  *    or translation is performed by the line discipline, regardless
46  *    of the tty flags
47  *
48  * 5. When line discipline is queried for the amount of receive
49  *    data available (FIOC), 0 is returned if no data available,
50  *    otherwise the count of the next available frame is returned.
51  *    (instead of the sum of all received frame counts).
52  *
53  * These conventions allow the standard tty programming interface
54  * to be used for synchronous HDLC applications when used with
55  * this line discipline (or another line discipline that is frame
56  * oriented such as N_PPP).
57  *
58  * The SyncLink driver (synclink.c) implements both asynchronous
59  * (using standard line discipline N_TTY) and synchronous HDLC
60  * (using N_HDLC) communications, with the latter using the above
61  * conventions.
62  *
63  * This implementation is very basic and does not maintain
64  * any statistics. The main point is to enforce the raw data
65  * and frame orientation of HDLC communications.
66  *
67  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
68  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
69  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
70  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
71  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
72  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
73  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
74  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
75  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
76  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
77  * OF THE POSSIBILITY OF SUCH DAMAGE.
78  */
79 
80 #define HDLC_MAGIC 0x239e
81 
82 #include <linux/module.h>
83 #include <linux/init.h>
84 #include <linux/kernel.h>
85 #include <linux/sched.h>
86 #include <linux/types.h>
87 #include <linux/fcntl.h>
88 #include <linux/interrupt.h>
89 #include <linux/ptrace.h>
90 
91 #undef VERSION
92 #define VERSION(major,minor,patch) (((((major)<<8)+(minor))<<8)+(patch))
93 
94 #include <linux/poll.h>
95 #include <linux/in.h>
96 #include <linux/ioctl.h>
97 #include <linux/slab.h>
98 #include <linux/tty.h>
99 #include <linux/errno.h>
100 #include <linux/smp_lock.h>
101 #include <linux/string.h>	/* used in new tty drivers */
102 #include <linux/signal.h>	/* used in new tty drivers */
103 #include <linux/if.h>
104 #include <linux/bitops.h>
105 
106 #include <asm/system.h>
107 #include <asm/termios.h>
108 #include <asm/uaccess.h>
109 
110 /*
111  * Buffers for individual HDLC frames
112  */
113 #define MAX_HDLC_FRAME_SIZE 65535
114 #define DEFAULT_RX_BUF_COUNT 10
115 #define MAX_RX_BUF_COUNT 60
116 #define DEFAULT_TX_BUF_COUNT 3
117 
118 struct n_hdlc_buf {
119 	struct n_hdlc_buf *link;
120 	int		  count;
121 	char		  buf[1];
122 };
123 
124 #define	N_HDLC_BUF_SIZE	(sizeof(struct n_hdlc_buf) + maxframe)
125 
126 struct n_hdlc_buf_list {
127 	struct n_hdlc_buf *head;
128 	struct n_hdlc_buf *tail;
129 	int		  count;
130 	spinlock_t	  spinlock;
131 };
132 
133 /**
134  * struct n_hdlc - per device instance data structure
135  * @magic - magic value for structure
136  * @flags - miscellaneous control flags
137  * @tty - ptr to TTY structure
138  * @backup_tty - TTY to use if tty gets closed
139  * @tbusy - reentrancy flag for tx wakeup code
140  * @woke_up - FIXME: describe this field
141  * @tbuf - currently transmitting tx buffer
142  * @tx_buf_list - list of pending transmit frame buffers
143  * @rx_buf_list - list of received frame buffers
144  * @tx_free_buf_list - list unused transmit frame buffers
145  * @rx_free_buf_list - list unused received frame buffers
146  */
147 struct n_hdlc {
148 	int			magic;
149 	__u32			flags;
150 	struct tty_struct	*tty;
151 	struct tty_struct	*backup_tty;
152 	int			tbusy;
153 	int			woke_up;
154 	struct n_hdlc_buf	*tbuf;
155 	struct n_hdlc_buf_list	tx_buf_list;
156 	struct n_hdlc_buf_list	rx_buf_list;
157 	struct n_hdlc_buf_list	tx_free_buf_list;
158 	struct n_hdlc_buf_list	rx_free_buf_list;
159 };
160 
161 /*
162  * HDLC buffer list manipulation functions
163  */
164 static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list);
165 static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
166 			   struct n_hdlc_buf *buf);
167 static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *list);
168 
169 /* Local functions */
170 
171 static struct n_hdlc *n_hdlc_alloc (void);
172 
173 /* debug level can be set by insmod for debugging purposes */
174 #define DEBUG_LEVEL_INFO	1
175 static int debuglevel;
176 
177 /* max frame size for memory allocations */
178 static int maxframe = 4096;
179 
180 /* TTY callbacks */
181 
182 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
183 			   __u8 __user *buf, size_t nr);
184 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
185 			    const unsigned char *buf, size_t nr);
186 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
187 			    unsigned int cmd, unsigned long arg);
188 static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
189 				    poll_table *wait);
190 static int n_hdlc_tty_open(struct tty_struct *tty);
191 static void n_hdlc_tty_close(struct tty_struct *tty);
192 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *cp,
193 			       char *fp, int count);
194 static void n_hdlc_tty_wakeup(struct tty_struct *tty);
195 
196 #define bset(p,b)	((p)[(b) >> 5] |= (1 << ((b) & 0x1f)))
197 
198 #define tty2n_hdlc(tty)	((struct n_hdlc *) ((tty)->disc_data))
199 #define n_hdlc2tty(n_hdlc)	((n_hdlc)->tty)
200 
201 static void flush_rx_queue(struct tty_struct *tty)
202 {
203 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
204 	struct n_hdlc_buf *buf;
205 
206 	while ((buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list)))
207 		n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, buf);
208 }
209 
210 static void flush_tx_queue(struct tty_struct *tty)
211 {
212 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
213 	struct n_hdlc_buf *buf;
214 	unsigned long flags;
215 
216 	while ((buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list)))
217 		n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, buf);
218  	spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
219 	if (n_hdlc->tbuf) {
220 		n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, n_hdlc->tbuf);
221 		n_hdlc->tbuf = NULL;
222 	}
223 	spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
224 }
225 
226 static struct tty_ldisc_ops n_hdlc_ldisc = {
227 	.owner		= THIS_MODULE,
228 	.magic		= TTY_LDISC_MAGIC,
229 	.name		= "hdlc",
230 	.open		= n_hdlc_tty_open,
231 	.close		= n_hdlc_tty_close,
232 	.read		= n_hdlc_tty_read,
233 	.write		= n_hdlc_tty_write,
234 	.ioctl		= n_hdlc_tty_ioctl,
235 	.poll		= n_hdlc_tty_poll,
236 	.receive_buf	= n_hdlc_tty_receive,
237 	.write_wakeup	= n_hdlc_tty_wakeup,
238 	.flush_buffer   = flush_rx_queue,
239 };
240 
241 /**
242  * n_hdlc_release - release an n_hdlc per device line discipline info structure
243  * @n_hdlc - per device line discipline info structure
244  */
245 static void n_hdlc_release(struct n_hdlc *n_hdlc)
246 {
247 	struct tty_struct *tty = n_hdlc2tty (n_hdlc);
248 	struct n_hdlc_buf *buf;
249 
250 	if (debuglevel >= DEBUG_LEVEL_INFO)
251 		printk("%s(%d)n_hdlc_release() called\n",__FILE__,__LINE__);
252 
253 	/* Ensure that the n_hdlcd process is not hanging on select()/poll() */
254 	wake_up_interruptible (&tty->read_wait);
255 	wake_up_interruptible (&tty->write_wait);
256 
257 	if (tty->disc_data == n_hdlc)
258 		tty->disc_data = NULL;	/* Break the tty->n_hdlc link */
259 
260 	/* Release transmit and receive buffers */
261 	for(;;) {
262 		buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
263 		if (buf) {
264 			kfree(buf);
265 		} else
266 			break;
267 	}
268 	for(;;) {
269 		buf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list);
270 		if (buf) {
271 			kfree(buf);
272 		} else
273 			break;
274 	}
275 	for(;;) {
276 		buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
277 		if (buf) {
278 			kfree(buf);
279 		} else
280 			break;
281 	}
282 	for(;;) {
283 		buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
284 		if (buf) {
285 			kfree(buf);
286 		} else
287 			break;
288 	}
289 	kfree(n_hdlc->tbuf);
290 	kfree(n_hdlc);
291 
292 }	/* end of n_hdlc_release() */
293 
294 /**
295  * n_hdlc_tty_close - line discipline close
296  * @tty - pointer to tty info structure
297  *
298  * Called when the line discipline is changed to something
299  * else, the tty is closed, or the tty detects a hangup.
300  */
301 static void n_hdlc_tty_close(struct tty_struct *tty)
302 {
303 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
304 
305 	if (debuglevel >= DEBUG_LEVEL_INFO)
306 		printk("%s(%d)n_hdlc_tty_close() called\n",__FILE__,__LINE__);
307 
308 	if (n_hdlc != NULL) {
309 		if (n_hdlc->magic != HDLC_MAGIC) {
310 			printk (KERN_WARNING"n_hdlc: trying to close unopened tty!\n");
311 			return;
312 		}
313 #if defined(TTY_NO_WRITE_SPLIT)
314 		clear_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
315 #endif
316 		tty->disc_data = NULL;
317 		if (tty == n_hdlc->backup_tty)
318 			n_hdlc->backup_tty = NULL;
319 		if (tty != n_hdlc->tty)
320 			return;
321 		if (n_hdlc->backup_tty) {
322 			n_hdlc->tty = n_hdlc->backup_tty;
323 		} else {
324 			n_hdlc_release (n_hdlc);
325 		}
326 	}
327 
328 	if (debuglevel >= DEBUG_LEVEL_INFO)
329 		printk("%s(%d)n_hdlc_tty_close() success\n",__FILE__,__LINE__);
330 
331 }	/* end of n_hdlc_tty_close() */
332 
333 /**
334  * n_hdlc_tty_open - called when line discipline changed to n_hdlc
335  * @tty - pointer to tty info structure
336  *
337  * Returns 0 if success, otherwise error code
338  */
339 static int n_hdlc_tty_open (struct tty_struct *tty)
340 {
341 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
342 
343 	if (debuglevel >= DEBUG_LEVEL_INFO)
344 		printk("%s(%d)n_hdlc_tty_open() called (device=%s)\n",
345 		__FILE__,__LINE__,
346 		tty->name);
347 
348 	/* There should not be an existing table for this slot. */
349 	if (n_hdlc) {
350 		printk (KERN_ERR"n_hdlc_tty_open:tty already associated!\n" );
351 		return -EEXIST;
352 	}
353 
354 	n_hdlc = n_hdlc_alloc();
355 	if (!n_hdlc) {
356 		printk (KERN_ERR "n_hdlc_alloc failed\n");
357 		return -ENFILE;
358 	}
359 
360 	tty->disc_data = n_hdlc;
361 	n_hdlc->tty    = tty;
362 	tty->receive_room = 65536;
363 
364 #if defined(TTY_NO_WRITE_SPLIT)
365 	/* change tty_io write() to not split large writes into 8K chunks */
366 	set_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
367 #endif
368 
369 	/* flush receive data from driver */
370 	tty_driver_flush_buffer(tty);
371 
372 	if (debuglevel >= DEBUG_LEVEL_INFO)
373 		printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__,__LINE__);
374 
375 	return 0;
376 
377 }	/* end of n_tty_hdlc_open() */
378 
379 /**
380  * n_hdlc_send_frames - send frames on pending send buffer list
381  * @n_hdlc - pointer to ldisc instance data
382  * @tty - pointer to tty instance data
383  *
384  * Send frames on pending send buffer list until the driver does not accept a
385  * frame (busy) this function is called after adding a frame to the send buffer
386  * list and by the tty wakeup callback.
387  */
388 static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
389 {
390 	register int actual;
391 	unsigned long flags;
392 	struct n_hdlc_buf *tbuf;
393 
394 	if (debuglevel >= DEBUG_LEVEL_INFO)
395 		printk("%s(%d)n_hdlc_send_frames() called\n",__FILE__,__LINE__);
396  check_again:
397 
398  	spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
399 	if (n_hdlc->tbusy) {
400 		n_hdlc->woke_up = 1;
401  		spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
402 		return;
403 	}
404 	n_hdlc->tbusy = 1;
405 	n_hdlc->woke_up = 0;
406 	spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
407 
408 	/* get current transmit buffer or get new transmit */
409 	/* buffer from list of pending transmit buffers */
410 
411 	tbuf = n_hdlc->tbuf;
412 	if (!tbuf)
413 		tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
414 
415 	while (tbuf) {
416 		if (debuglevel >= DEBUG_LEVEL_INFO)
417 			printk("%s(%d)sending frame %p, count=%d\n",
418 				__FILE__,__LINE__,tbuf,tbuf->count);
419 
420 		/* Send the next block of data to device */
421 		tty->flags |= (1 << TTY_DO_WRITE_WAKEUP);
422 		actual = tty->ops->write(tty, tbuf->buf, tbuf->count);
423 
424 		/* rollback was possible and has been done */
425 		if (actual == -ERESTARTSYS) {
426 			n_hdlc->tbuf = tbuf;
427 			break;
428 		}
429 		/* if transmit error, throw frame away by */
430 		/* pretending it was accepted by driver */
431 		if (actual < 0)
432 			actual = tbuf->count;
433 
434 		if (actual == tbuf->count) {
435 			if (debuglevel >= DEBUG_LEVEL_INFO)
436 				printk("%s(%d)frame %p completed\n",
437 					__FILE__,__LINE__,tbuf);
438 
439 			/* free current transmit buffer */
440 			n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, tbuf);
441 
442 			/* this tx buffer is done */
443 			n_hdlc->tbuf = NULL;
444 
445 			/* wait up sleeping writers */
446 			wake_up_interruptible(&tty->write_wait);
447 
448 			/* get next pending transmit buffer */
449 			tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
450 		} else {
451 			if (debuglevel >= DEBUG_LEVEL_INFO)
452 				printk("%s(%d)frame %p pending\n",
453 					__FILE__,__LINE__,tbuf);
454 
455 			/* buffer not accepted by driver */
456 			/* set this buffer as pending buffer */
457 			n_hdlc->tbuf = tbuf;
458 			break;
459 		}
460 	}
461 
462 	if (!tbuf)
463 		tty->flags  &= ~(1 << TTY_DO_WRITE_WAKEUP);
464 
465 	/* Clear the re-entry flag */
466 	spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
467 	n_hdlc->tbusy = 0;
468 	spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
469 
470         if (n_hdlc->woke_up)
471 	  goto check_again;
472 
473 	if (debuglevel >= DEBUG_LEVEL_INFO)
474 		printk("%s(%d)n_hdlc_send_frames() exit\n",__FILE__,__LINE__);
475 
476 }	/* end of n_hdlc_send_frames() */
477 
478 /**
479  * n_hdlc_tty_wakeup - Callback for transmit wakeup
480  * @tty	- pointer to associated tty instance data
481  *
482  * Called when low level device driver can accept more send data.
483  */
484 static void n_hdlc_tty_wakeup(struct tty_struct *tty)
485 {
486 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
487 
488 	if (debuglevel >= DEBUG_LEVEL_INFO)
489 		printk("%s(%d)n_hdlc_tty_wakeup() called\n",__FILE__,__LINE__);
490 
491 	if (!n_hdlc)
492 		return;
493 
494 	if (tty != n_hdlc->tty) {
495 		tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
496 		return;
497 	}
498 
499 	n_hdlc_send_frames (n_hdlc, tty);
500 
501 }	/* end of n_hdlc_tty_wakeup() */
502 
503 /**
504  * n_hdlc_tty_receive - Called by tty driver when receive data is available
505  * @tty	- pointer to tty instance data
506  * @data - pointer to received data
507  * @flags - pointer to flags for data
508  * @count - count of received data in bytes
509  *
510  * Called by tty low level driver when receive data is available. Data is
511  * interpreted as one HDLC frame.
512  */
513 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data,
514 			       char *flags, int count)
515 {
516 	register struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
517 	register struct n_hdlc_buf *buf;
518 
519 	if (debuglevel >= DEBUG_LEVEL_INFO)
520 		printk("%s(%d)n_hdlc_tty_receive() called count=%d\n",
521 			__FILE__,__LINE__, count);
522 
523 	/* This can happen if stuff comes in on the backup tty */
524 	if (!n_hdlc || tty != n_hdlc->tty)
525 		return;
526 
527 	/* verify line is using HDLC discipline */
528 	if (n_hdlc->magic != HDLC_MAGIC) {
529 		printk("%s(%d) line not using HDLC discipline\n",
530 			__FILE__,__LINE__);
531 		return;
532 	}
533 
534 	if ( count>maxframe ) {
535 		if (debuglevel >= DEBUG_LEVEL_INFO)
536 			printk("%s(%d) rx count>maxframesize, data discarded\n",
537 			       __FILE__,__LINE__);
538 		return;
539 	}
540 
541 	/* get a free HDLC buffer */
542 	buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
543 	if (!buf) {
544 		/* no buffers in free list, attempt to allocate another rx buffer */
545 		/* unless the maximum count has been reached */
546 		if (n_hdlc->rx_buf_list.count < MAX_RX_BUF_COUNT)
547 			buf = kmalloc(N_HDLC_BUF_SIZE, GFP_ATOMIC);
548 	}
549 
550 	if (!buf) {
551 		if (debuglevel >= DEBUG_LEVEL_INFO)
552 			printk("%s(%d) no more rx buffers, data discarded\n",
553 			       __FILE__,__LINE__);
554 		return;
555 	}
556 
557 	/* copy received data to HDLC buffer */
558 	memcpy(buf->buf,data,count);
559 	buf->count=count;
560 
561 	/* add HDLC buffer to list of received frames */
562 	n_hdlc_buf_put(&n_hdlc->rx_buf_list, buf);
563 
564 	/* wake up any blocked reads and perform async signalling */
565 	wake_up_interruptible (&tty->read_wait);
566 	if (n_hdlc->tty->fasync != NULL)
567 		kill_fasync (&n_hdlc->tty->fasync, SIGIO, POLL_IN);
568 
569 }	/* end of n_hdlc_tty_receive() */
570 
571 /**
572  * n_hdlc_tty_read - Called to retrieve one frame of data (if available)
573  * @tty - pointer to tty instance data
574  * @file - pointer to open file object
575  * @buf - pointer to returned data buffer
576  * @nr - size of returned data buffer
577  *
578  * Returns the number of bytes returned or error code.
579  */
580 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
581 			   __u8 __user *buf, size_t nr)
582 {
583 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
584 	int ret = 0;
585 	struct n_hdlc_buf *rbuf;
586 	DECLARE_WAITQUEUE(wait, current);
587 
588 	if (debuglevel >= DEBUG_LEVEL_INFO)
589 		printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__);
590 
591 	/* Validate the pointers */
592 	if (!n_hdlc)
593 		return -EIO;
594 
595 	/* verify user access to buffer */
596 	if (!access_ok(VERIFY_WRITE, buf, nr)) {
597 		printk(KERN_WARNING "%s(%d) n_hdlc_tty_read() can't verify user "
598 		"buffer\n", __FILE__, __LINE__);
599 		return -EFAULT;
600 	}
601 
602 	add_wait_queue(&tty->read_wait, &wait);
603 
604 	for (;;) {
605 		if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
606 			ret = -EIO;
607 			break;
608 		}
609 		if (tty_hung_up_p(file))
610 			break;
611 
612 		set_current_state(TASK_INTERRUPTIBLE);
613 
614 		rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
615 		if (rbuf) {
616 			if (rbuf->count > nr) {
617 				/* too large for caller's buffer */
618 				ret = -EOVERFLOW;
619 			} else {
620 				if (copy_to_user(buf, rbuf->buf, rbuf->count))
621 					ret = -EFAULT;
622 				else
623 					ret = rbuf->count;
624 			}
625 
626 			if (n_hdlc->rx_free_buf_list.count >
627 			    DEFAULT_RX_BUF_COUNT)
628 				kfree(rbuf);
629 			else
630 				n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, rbuf);
631 			break;
632 		}
633 
634 		/* no data */
635 		if (file->f_flags & O_NONBLOCK) {
636 			ret = -EAGAIN;
637 			break;
638 		}
639 
640 		schedule();
641 
642 		if (signal_pending(current)) {
643 			ret = -EINTR;
644 			break;
645 		}
646 	}
647 
648 	remove_wait_queue(&tty->read_wait, &wait);
649 	__set_current_state(TASK_RUNNING);
650 
651 	return ret;
652 
653 }	/* end of n_hdlc_tty_read() */
654 
655 /**
656  * n_hdlc_tty_write - write a single frame of data to device
657  * @tty	- pointer to associated tty device instance data
658  * @file - pointer to file object data
659  * @data - pointer to transmit data (one frame)
660  * @count - size of transmit frame in bytes
661  *
662  * Returns the number of bytes written (or error code).
663  */
664 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
665 			    const unsigned char *data, size_t count)
666 {
667 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
668 	int error = 0;
669 	DECLARE_WAITQUEUE(wait, current);
670 	struct n_hdlc_buf *tbuf;
671 
672 	if (debuglevel >= DEBUG_LEVEL_INFO)
673 		printk("%s(%d)n_hdlc_tty_write() called count=%Zd\n",
674 			__FILE__,__LINE__,count);
675 
676 	/* Verify pointers */
677 	if (!n_hdlc)
678 		return -EIO;
679 
680 	if (n_hdlc->magic != HDLC_MAGIC)
681 		return -EIO;
682 
683 	/* verify frame size */
684 	if (count > maxframe ) {
685 		if (debuglevel & DEBUG_LEVEL_INFO)
686 			printk (KERN_WARNING
687 				"n_hdlc_tty_write: truncating user packet "
688 				"from %lu to %d\n", (unsigned long) count,
689 				maxframe );
690 		count = maxframe;
691 	}
692 
693 	add_wait_queue(&tty->write_wait, &wait);
694 
695 	for (;;) {
696 		set_current_state(TASK_INTERRUPTIBLE);
697 
698 		tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list);
699 		if (tbuf)
700 			break;
701 
702 		if (file->f_flags & O_NONBLOCK) {
703 			error = -EAGAIN;
704 			break;
705 		}
706 		schedule();
707 
708 		n_hdlc = tty2n_hdlc (tty);
709 		if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC ||
710 		    tty != n_hdlc->tty) {
711 			printk("n_hdlc_tty_write: %p invalid after wait!\n", n_hdlc);
712 			error = -EIO;
713 			break;
714 		}
715 
716 		if (signal_pending(current)) {
717 			error = -EINTR;
718 			break;
719 		}
720 	}
721 
722 	__set_current_state(TASK_RUNNING);
723 	remove_wait_queue(&tty->write_wait, &wait);
724 
725 	if (!error) {
726 		/* Retrieve the user's buffer */
727 		memcpy(tbuf->buf, data, count);
728 
729 		/* Send the data */
730 		tbuf->count = error = count;
731 		n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf);
732 		n_hdlc_send_frames(n_hdlc,tty);
733 	}
734 
735 	return error;
736 
737 }	/* end of n_hdlc_tty_write() */
738 
739 /**
740  * n_hdlc_tty_ioctl - process IOCTL system call for the tty device.
741  * @tty - pointer to tty instance data
742  * @file - pointer to open file object for device
743  * @cmd - IOCTL command code
744  * @arg - argument for IOCTL call (cmd dependent)
745  *
746  * Returns command dependent result.
747  */
748 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
749 			    unsigned int cmd, unsigned long arg)
750 {
751 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
752 	int error = 0;
753 	int count;
754 	unsigned long flags;
755 
756 	if (debuglevel >= DEBUG_LEVEL_INFO)
757 		printk("%s(%d)n_hdlc_tty_ioctl() called %d\n",
758 			__FILE__,__LINE__,cmd);
759 
760 	/* Verify the status of the device */
761 	if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC)
762 		return -EBADF;
763 
764 	switch (cmd) {
765 	case FIONREAD:
766 		/* report count of read data available */
767 		/* in next available frame (if any) */
768 		spin_lock_irqsave(&n_hdlc->rx_buf_list.spinlock,flags);
769 		if (n_hdlc->rx_buf_list.head)
770 			count = n_hdlc->rx_buf_list.head->count;
771 		else
772 			count = 0;
773 		spin_unlock_irqrestore(&n_hdlc->rx_buf_list.spinlock,flags);
774 		error = put_user(count, (int __user *)arg);
775 		break;
776 
777 	case TIOCOUTQ:
778 		/* get the pending tx byte count in the driver */
779 		count = tty_chars_in_buffer(tty);
780 		/* add size of next output frame in queue */
781 		spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock,flags);
782 		if (n_hdlc->tx_buf_list.head)
783 			count += n_hdlc->tx_buf_list.head->count;
784 		spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock,flags);
785 		error = put_user(count, (int __user *)arg);
786 		break;
787 
788 	case TCFLSH:
789 		switch (arg) {
790 		case TCIOFLUSH:
791 		case TCOFLUSH:
792 			flush_tx_queue(tty);
793 		}
794 		/* fall through to default */
795 
796 	default:
797 		error = n_tty_ioctl_helper(tty, file, cmd, arg);
798 		break;
799 	}
800 	return error;
801 
802 }	/* end of n_hdlc_tty_ioctl() */
803 
804 /**
805  * n_hdlc_tty_poll - TTY callback for poll system call
806  * @tty - pointer to tty instance data
807  * @filp - pointer to open file object for device
808  * @poll_table - wait queue for operations
809  *
810  * Determine which operations (read/write) will not block and return info
811  * to caller.
812  * Returns a bit mask containing info on which ops will not block.
813  */
814 static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
815 				    poll_table *wait)
816 {
817 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
818 	unsigned int mask = 0;
819 
820 	if (debuglevel >= DEBUG_LEVEL_INFO)
821 		printk("%s(%d)n_hdlc_tty_poll() called\n",__FILE__,__LINE__);
822 
823 	if (n_hdlc && n_hdlc->magic == HDLC_MAGIC && tty == n_hdlc->tty) {
824 		/* queue current process into any wait queue that */
825 		/* may awaken in the future (read and write) */
826 
827 		poll_wait(filp, &tty->read_wait, wait);
828 		poll_wait(filp, &tty->write_wait, wait);
829 
830 		/* set bits for operations that won't block */
831 		if (n_hdlc->rx_buf_list.head)
832 			mask |= POLLIN | POLLRDNORM;	/* readable */
833 		if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
834 			mask |= POLLHUP;
835 		if (tty_hung_up_p(filp))
836 			mask |= POLLHUP;
837 		if (!tty_is_writelocked(tty) &&
838 				n_hdlc->tx_free_buf_list.head)
839 			mask |= POLLOUT | POLLWRNORM;	/* writable */
840 	}
841 	return mask;
842 }	/* end of n_hdlc_tty_poll() */
843 
844 /**
845  * n_hdlc_alloc - allocate an n_hdlc instance data structure
846  *
847  * Returns a pointer to newly created structure if success, otherwise %NULL
848  */
849 static struct n_hdlc *n_hdlc_alloc(void)
850 {
851 	struct n_hdlc_buf *buf;
852 	int i;
853 	struct n_hdlc *n_hdlc = kmalloc(sizeof(*n_hdlc), GFP_KERNEL);
854 
855 	if (!n_hdlc)
856 		return NULL;
857 
858 	memset(n_hdlc, 0, sizeof(*n_hdlc));
859 
860 	n_hdlc_buf_list_init(&n_hdlc->rx_free_buf_list);
861 	n_hdlc_buf_list_init(&n_hdlc->tx_free_buf_list);
862 	n_hdlc_buf_list_init(&n_hdlc->rx_buf_list);
863 	n_hdlc_buf_list_init(&n_hdlc->tx_buf_list);
864 
865 	/* allocate free rx buffer list */
866 	for(i=0;i<DEFAULT_RX_BUF_COUNT;i++) {
867 		buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
868 		if (buf)
869 			n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,buf);
870 		else if (debuglevel >= DEBUG_LEVEL_INFO)
871 			printk("%s(%d)n_hdlc_alloc(), kalloc() failed for rx buffer %d\n",__FILE__,__LINE__, i);
872 	}
873 
874 	/* allocate free tx buffer list */
875 	for(i=0;i<DEFAULT_TX_BUF_COUNT;i++) {
876 		buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
877 		if (buf)
878 			n_hdlc_buf_put(&n_hdlc->tx_free_buf_list,buf);
879 		else if (debuglevel >= DEBUG_LEVEL_INFO)
880 			printk("%s(%d)n_hdlc_alloc(), kalloc() failed for tx buffer %d\n",__FILE__,__LINE__, i);
881 	}
882 
883 	/* Initialize the control block */
884 	n_hdlc->magic  = HDLC_MAGIC;
885 	n_hdlc->flags  = 0;
886 
887 	return n_hdlc;
888 
889 }	/* end of n_hdlc_alloc() */
890 
891 /**
892  * n_hdlc_buf_list_init - initialize specified HDLC buffer list
893  * @list - pointer to buffer list
894  */
895 static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list)
896 {
897 	memset(list, 0, sizeof(*list));
898 	spin_lock_init(&list->spinlock);
899 }	/* end of n_hdlc_buf_list_init() */
900 
901 /**
902  * n_hdlc_buf_put - add specified HDLC buffer to tail of specified list
903  * @list - pointer to buffer list
904  * @buf	- pointer to buffer
905  */
906 static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
907 			   struct n_hdlc_buf *buf)
908 {
909 	unsigned long flags;
910 	spin_lock_irqsave(&list->spinlock,flags);
911 
912 	buf->link=NULL;
913 	if (list->tail)
914 		list->tail->link = buf;
915 	else
916 		list->head = buf;
917 	list->tail = buf;
918 	(list->count)++;
919 
920 	spin_unlock_irqrestore(&list->spinlock,flags);
921 
922 }	/* end of n_hdlc_buf_put() */
923 
924 /**
925  * n_hdlc_buf_get - remove and return an HDLC buffer from list
926  * @list - pointer to HDLC buffer list
927  *
928  * Remove and return an HDLC buffer from the head of the specified HDLC buffer
929  * list.
930  * Returns a pointer to HDLC buffer if available, otherwise %NULL.
931  */
932 static struct n_hdlc_buf* n_hdlc_buf_get(struct n_hdlc_buf_list *list)
933 {
934 	unsigned long flags;
935 	struct n_hdlc_buf *buf;
936 	spin_lock_irqsave(&list->spinlock,flags);
937 
938 	buf = list->head;
939 	if (buf) {
940 		list->head = buf->link;
941 		(list->count)--;
942 	}
943 	if (!list->head)
944 		list->tail = NULL;
945 
946 	spin_unlock_irqrestore(&list->spinlock,flags);
947 	return buf;
948 
949 }	/* end of n_hdlc_buf_get() */
950 
951 static char hdlc_banner[] __initdata =
952 	KERN_INFO "HDLC line discipline maxframe=%u\n";
953 static char hdlc_register_ok[] __initdata =
954 	KERN_INFO "N_HDLC line discipline registered.\n";
955 static char hdlc_register_fail[] __initdata =
956 	KERN_ERR "error registering line discipline: %d\n";
957 static char hdlc_init_fail[] __initdata =
958 	KERN_INFO "N_HDLC: init failure %d\n";
959 
960 static int __init n_hdlc_init(void)
961 {
962 	int status;
963 
964 	/* range check maxframe arg */
965 	if (maxframe < 4096)
966 		maxframe = 4096;
967 	else if (maxframe > 65535)
968 		maxframe = 65535;
969 
970 	printk(hdlc_banner, maxframe);
971 
972 	status = tty_register_ldisc(N_HDLC, &n_hdlc_ldisc);
973 	if (!status)
974 		printk(hdlc_register_ok);
975 	else
976 		printk(hdlc_register_fail, status);
977 
978 	if (status)
979 		printk(hdlc_init_fail, status);
980 	return status;
981 
982 }	/* end of init_module() */
983 
984 static char hdlc_unregister_ok[] __exitdata =
985 	KERN_INFO "N_HDLC: line discipline unregistered\n";
986 static char hdlc_unregister_fail[] __exitdata =
987 	KERN_ERR "N_HDLC: can't unregister line discipline (err = %d)\n";
988 
989 static void __exit n_hdlc_exit(void)
990 {
991 	/* Release tty registration of line discipline */
992 	int status = tty_unregister_ldisc(N_HDLC);
993 
994 	if (status)
995 		printk(hdlc_unregister_fail, status);
996 	else
997 		printk(hdlc_unregister_ok);
998 }
999 
1000 module_init(n_hdlc_init);
1001 module_exit(n_hdlc_exit);
1002 
1003 MODULE_LICENSE("GPL");
1004 MODULE_AUTHOR("Paul Fulghum paulkf@microgate.com");
1005 module_param(debuglevel, int, 0);
1006 module_param(maxframe, int, 0);
1007 MODULE_ALIAS_LDISC(N_HDLC);
1008