xref: /openbmc/linux/drivers/tty/n_hdlc.c (revision c819e2cf)
1 /* generic HDLC line discipline for Linux
2  *
3  * Written by Paul Fulghum paulkf@microgate.com
4  * for Microgate Corporation
5  *
6  * Microgate and SyncLink are registered trademarks of Microgate Corporation
7  *
8  * Adapted from ppp.c, written by Michael Callahan <callahan@maths.ox.ac.uk>,
9  *	Al Longyear <longyear@netcom.com>,
10  *	Paul Mackerras <Paul.Mackerras@cs.anu.edu.au>
11  *
12  * Original release 01/11/99
13  *
14  * This code is released under the GNU General Public License (GPL)
15  *
16  * This module implements the tty line discipline N_HDLC for use with
17  * tty device drivers that support bit-synchronous HDLC communications.
18  *
19  * All HDLC data is frame oriented which means:
20  *
21  * 1. tty write calls represent one complete transmit frame of data
22  *    The device driver should accept the complete frame or none of
23  *    the frame (busy) in the write method. Each write call should have
24  *    a byte count in the range of 2-65535 bytes (2 is min HDLC frame
25  *    with 1 addr byte and 1 ctrl byte). The max byte count of 65535
26  *    should include any crc bytes required. For example, when using
27  *    CCITT CRC32, 4 crc bytes are required, so the maximum size frame
28  *    the application may transmit is limited to 65531 bytes. For CCITT
29  *    CRC16, the maximum application frame size would be 65533.
30  *
31  *
32  * 2. receive callbacks from the device driver represents
33  *    one received frame. The device driver should bypass
34  *    the tty flip buffer and call the line discipline receive
35  *    callback directly to avoid fragmenting or concatenating
36  *    multiple frames into a single receive callback.
37  *
38  *    The HDLC line discipline queues the receive frames in separate
39  *    buffers so complete receive frames can be returned by the
40  *    tty read calls.
41  *
42  * 3. tty read calls returns an entire frame of data or nothing.
43  *
44  * 4. all send and receive data is considered raw. No processing
45  *    or translation is performed by the line discipline, regardless
46  *    of the tty flags
47  *
48  * 5. When line discipline is queried for the amount of receive
49  *    data available (FIOC), 0 is returned if no data available,
50  *    otherwise the count of the next available frame is returned.
51  *    (instead of the sum of all received frame counts).
52  *
53  * These conventions allow the standard tty programming interface
54  * to be used for synchronous HDLC applications when used with
55  * this line discipline (or another line discipline that is frame
56  * oriented such as N_PPP).
57  *
58  * The SyncLink driver (synclink.c) implements both asynchronous
59  * (using standard line discipline N_TTY) and synchronous HDLC
60  * (using N_HDLC) communications, with the latter using the above
61  * conventions.
62  *
63  * This implementation is very basic and does not maintain
64  * any statistics. The main point is to enforce the raw data
65  * and frame orientation of HDLC communications.
66  *
67  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
68  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
69  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
70  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
71  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
72  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
73  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
74  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
75  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
76  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
77  * OF THE POSSIBILITY OF SUCH DAMAGE.
78  */
79 
80 #define HDLC_MAGIC 0x239e
81 
82 #include <linux/module.h>
83 #include <linux/init.h>
84 #include <linux/kernel.h>
85 #include <linux/sched.h>
86 #include <linux/types.h>
87 #include <linux/fcntl.h>
88 #include <linux/interrupt.h>
89 #include <linux/ptrace.h>
90 
91 #undef VERSION
92 #define VERSION(major,minor,patch) (((((major)<<8)+(minor))<<8)+(patch))
93 
94 #include <linux/poll.h>
95 #include <linux/in.h>
96 #include <linux/ioctl.h>
97 #include <linux/slab.h>
98 #include <linux/tty.h>
99 #include <linux/errno.h>
100 #include <linux/string.h>	/* used in new tty drivers */
101 #include <linux/signal.h>	/* used in new tty drivers */
102 #include <linux/if.h>
103 #include <linux/bitops.h>
104 
105 #include <asm/termios.h>
106 #include <asm/uaccess.h>
107 
108 /*
109  * Buffers for individual HDLC frames
110  */
111 #define MAX_HDLC_FRAME_SIZE 65535
112 #define DEFAULT_RX_BUF_COUNT 10
113 #define MAX_RX_BUF_COUNT 60
114 #define DEFAULT_TX_BUF_COUNT 3
115 
116 struct n_hdlc_buf {
117 	struct n_hdlc_buf *link;
118 	int		  count;
119 	char		  buf[1];
120 };
121 
122 #define	N_HDLC_BUF_SIZE	(sizeof(struct n_hdlc_buf) + maxframe)
123 
124 struct n_hdlc_buf_list {
125 	struct n_hdlc_buf *head;
126 	struct n_hdlc_buf *tail;
127 	int		  count;
128 	spinlock_t	  spinlock;
129 };
130 
131 /**
132  * struct n_hdlc - per device instance data structure
133  * @magic - magic value for structure
134  * @flags - miscellaneous control flags
135  * @tty - ptr to TTY structure
136  * @backup_tty - TTY to use if tty gets closed
137  * @tbusy - reentrancy flag for tx wakeup code
138  * @woke_up - FIXME: describe this field
139  * @tbuf - currently transmitting tx buffer
140  * @tx_buf_list - list of pending transmit frame buffers
141  * @rx_buf_list - list of received frame buffers
142  * @tx_free_buf_list - list unused transmit frame buffers
143  * @rx_free_buf_list - list unused received frame buffers
144  */
145 struct n_hdlc {
146 	int			magic;
147 	__u32			flags;
148 	struct tty_struct	*tty;
149 	struct tty_struct	*backup_tty;
150 	int			tbusy;
151 	int			woke_up;
152 	struct n_hdlc_buf	*tbuf;
153 	struct n_hdlc_buf_list	tx_buf_list;
154 	struct n_hdlc_buf_list	rx_buf_list;
155 	struct n_hdlc_buf_list	tx_free_buf_list;
156 	struct n_hdlc_buf_list	rx_free_buf_list;
157 };
158 
159 /*
160  * HDLC buffer list manipulation functions
161  */
162 static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list);
163 static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
164 			   struct n_hdlc_buf *buf);
165 static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *list);
166 
167 /* Local functions */
168 
169 static struct n_hdlc *n_hdlc_alloc (void);
170 
171 /* debug level can be set by insmod for debugging purposes */
172 #define DEBUG_LEVEL_INFO	1
173 static int debuglevel;
174 
175 /* max frame size for memory allocations */
176 static int maxframe = 4096;
177 
178 /* TTY callbacks */
179 
180 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
181 			   __u8 __user *buf, size_t nr);
182 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
183 			    const unsigned char *buf, size_t nr);
184 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
185 			    unsigned int cmd, unsigned long arg);
186 static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
187 				    poll_table *wait);
188 static int n_hdlc_tty_open(struct tty_struct *tty);
189 static void n_hdlc_tty_close(struct tty_struct *tty);
190 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *cp,
191 			       char *fp, int count);
192 static void n_hdlc_tty_wakeup(struct tty_struct *tty);
193 
194 #define bset(p,b)	((p)[(b) >> 5] |= (1 << ((b) & 0x1f)))
195 
196 #define tty2n_hdlc(tty)	((struct n_hdlc *) ((tty)->disc_data))
197 #define n_hdlc2tty(n_hdlc)	((n_hdlc)->tty)
198 
199 static void flush_rx_queue(struct tty_struct *tty)
200 {
201 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
202 	struct n_hdlc_buf *buf;
203 
204 	while ((buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list)))
205 		n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, buf);
206 }
207 
208 static void flush_tx_queue(struct tty_struct *tty)
209 {
210 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
211 	struct n_hdlc_buf *buf;
212 	unsigned long flags;
213 
214 	while ((buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list)))
215 		n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, buf);
216  	spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
217 	if (n_hdlc->tbuf) {
218 		n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, n_hdlc->tbuf);
219 		n_hdlc->tbuf = NULL;
220 	}
221 	spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
222 }
223 
224 static struct tty_ldisc_ops n_hdlc_ldisc = {
225 	.owner		= THIS_MODULE,
226 	.magic		= TTY_LDISC_MAGIC,
227 	.name		= "hdlc",
228 	.open		= n_hdlc_tty_open,
229 	.close		= n_hdlc_tty_close,
230 	.read		= n_hdlc_tty_read,
231 	.write		= n_hdlc_tty_write,
232 	.ioctl		= n_hdlc_tty_ioctl,
233 	.poll		= n_hdlc_tty_poll,
234 	.receive_buf	= n_hdlc_tty_receive,
235 	.write_wakeup	= n_hdlc_tty_wakeup,
236 	.flush_buffer   = flush_rx_queue,
237 };
238 
239 /**
240  * n_hdlc_release - release an n_hdlc per device line discipline info structure
241  * @n_hdlc - per device line discipline info structure
242  */
243 static void n_hdlc_release(struct n_hdlc *n_hdlc)
244 {
245 	struct tty_struct *tty = n_hdlc2tty (n_hdlc);
246 	struct n_hdlc_buf *buf;
247 
248 	if (debuglevel >= DEBUG_LEVEL_INFO)
249 		printk("%s(%d)n_hdlc_release() called\n",__FILE__,__LINE__);
250 
251 	/* Ensure that the n_hdlcd process is not hanging on select()/poll() */
252 	wake_up_interruptible (&tty->read_wait);
253 	wake_up_interruptible (&tty->write_wait);
254 
255 	if (tty->disc_data == n_hdlc)
256 		tty->disc_data = NULL;	/* Break the tty->n_hdlc link */
257 
258 	/* Release transmit and receive buffers */
259 	for(;;) {
260 		buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
261 		if (buf) {
262 			kfree(buf);
263 		} else
264 			break;
265 	}
266 	for(;;) {
267 		buf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list);
268 		if (buf) {
269 			kfree(buf);
270 		} else
271 			break;
272 	}
273 	for(;;) {
274 		buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
275 		if (buf) {
276 			kfree(buf);
277 		} else
278 			break;
279 	}
280 	for(;;) {
281 		buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
282 		if (buf) {
283 			kfree(buf);
284 		} else
285 			break;
286 	}
287 	kfree(n_hdlc->tbuf);
288 	kfree(n_hdlc);
289 
290 }	/* end of n_hdlc_release() */
291 
292 /**
293  * n_hdlc_tty_close - line discipline close
294  * @tty - pointer to tty info structure
295  *
296  * Called when the line discipline is changed to something
297  * else, the tty is closed, or the tty detects a hangup.
298  */
299 static void n_hdlc_tty_close(struct tty_struct *tty)
300 {
301 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
302 
303 	if (debuglevel >= DEBUG_LEVEL_INFO)
304 		printk("%s(%d)n_hdlc_tty_close() called\n",__FILE__,__LINE__);
305 
306 	if (n_hdlc != NULL) {
307 		if (n_hdlc->magic != HDLC_MAGIC) {
308 			printk (KERN_WARNING"n_hdlc: trying to close unopened tty!\n");
309 			return;
310 		}
311 #if defined(TTY_NO_WRITE_SPLIT)
312 		clear_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
313 #endif
314 		tty->disc_data = NULL;
315 		if (tty == n_hdlc->backup_tty)
316 			n_hdlc->backup_tty = NULL;
317 		if (tty != n_hdlc->tty)
318 			return;
319 		if (n_hdlc->backup_tty) {
320 			n_hdlc->tty = n_hdlc->backup_tty;
321 		} else {
322 			n_hdlc_release (n_hdlc);
323 		}
324 	}
325 
326 	if (debuglevel >= DEBUG_LEVEL_INFO)
327 		printk("%s(%d)n_hdlc_tty_close() success\n",__FILE__,__LINE__);
328 
329 }	/* end of n_hdlc_tty_close() */
330 
331 /**
332  * n_hdlc_tty_open - called when line discipline changed to n_hdlc
333  * @tty - pointer to tty info structure
334  *
335  * Returns 0 if success, otherwise error code
336  */
337 static int n_hdlc_tty_open (struct tty_struct *tty)
338 {
339 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
340 
341 	if (debuglevel >= DEBUG_LEVEL_INFO)
342 		printk("%s(%d)n_hdlc_tty_open() called (device=%s)\n",
343 		__FILE__,__LINE__,
344 		tty->name);
345 
346 	/* There should not be an existing table for this slot. */
347 	if (n_hdlc) {
348 		printk (KERN_ERR"n_hdlc_tty_open:tty already associated!\n" );
349 		return -EEXIST;
350 	}
351 
352 	n_hdlc = n_hdlc_alloc();
353 	if (!n_hdlc) {
354 		printk (KERN_ERR "n_hdlc_alloc failed\n");
355 		return -ENFILE;
356 	}
357 
358 	tty->disc_data = n_hdlc;
359 	n_hdlc->tty    = tty;
360 	tty->receive_room = 65536;
361 
362 #if defined(TTY_NO_WRITE_SPLIT)
363 	/* change tty_io write() to not split large writes into 8K chunks */
364 	set_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
365 #endif
366 
367 	/* flush receive data from driver */
368 	tty_driver_flush_buffer(tty);
369 
370 	if (debuglevel >= DEBUG_LEVEL_INFO)
371 		printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__,__LINE__);
372 
373 	return 0;
374 
375 }	/* end of n_tty_hdlc_open() */
376 
377 /**
378  * n_hdlc_send_frames - send frames on pending send buffer list
379  * @n_hdlc - pointer to ldisc instance data
380  * @tty - pointer to tty instance data
381  *
382  * Send frames on pending send buffer list until the driver does not accept a
383  * frame (busy) this function is called after adding a frame to the send buffer
384  * list and by the tty wakeup callback.
385  */
386 static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
387 {
388 	register int actual;
389 	unsigned long flags;
390 	struct n_hdlc_buf *tbuf;
391 
392 	if (debuglevel >= DEBUG_LEVEL_INFO)
393 		printk("%s(%d)n_hdlc_send_frames() called\n",__FILE__,__LINE__);
394  check_again:
395 
396  	spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
397 	if (n_hdlc->tbusy) {
398 		n_hdlc->woke_up = 1;
399  		spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
400 		return;
401 	}
402 	n_hdlc->tbusy = 1;
403 	n_hdlc->woke_up = 0;
404 	spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
405 
406 	/* get current transmit buffer or get new transmit */
407 	/* buffer from list of pending transmit buffers */
408 
409 	tbuf = n_hdlc->tbuf;
410 	if (!tbuf)
411 		tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
412 
413 	while (tbuf) {
414 		if (debuglevel >= DEBUG_LEVEL_INFO)
415 			printk("%s(%d)sending frame %p, count=%d\n",
416 				__FILE__,__LINE__,tbuf,tbuf->count);
417 
418 		/* Send the next block of data to device */
419 		set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
420 		actual = tty->ops->write(tty, tbuf->buf, tbuf->count);
421 
422 		/* rollback was possible and has been done */
423 		if (actual == -ERESTARTSYS) {
424 			n_hdlc->tbuf = tbuf;
425 			break;
426 		}
427 		/* if transmit error, throw frame away by */
428 		/* pretending it was accepted by driver */
429 		if (actual < 0)
430 			actual = tbuf->count;
431 
432 		if (actual == tbuf->count) {
433 			if (debuglevel >= DEBUG_LEVEL_INFO)
434 				printk("%s(%d)frame %p completed\n",
435 					__FILE__,__LINE__,tbuf);
436 
437 			/* free current transmit buffer */
438 			n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, tbuf);
439 
440 			/* this tx buffer is done */
441 			n_hdlc->tbuf = NULL;
442 
443 			/* wait up sleeping writers */
444 			wake_up_interruptible(&tty->write_wait);
445 
446 			/* get next pending transmit buffer */
447 			tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
448 		} else {
449 			if (debuglevel >= DEBUG_LEVEL_INFO)
450 				printk("%s(%d)frame %p pending\n",
451 					__FILE__,__LINE__,tbuf);
452 
453 			/* buffer not accepted by driver */
454 			/* set this buffer as pending buffer */
455 			n_hdlc->tbuf = tbuf;
456 			break;
457 		}
458 	}
459 
460 	if (!tbuf)
461 		clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
462 
463 	/* Clear the re-entry flag */
464 	spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
465 	n_hdlc->tbusy = 0;
466 	spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
467 
468         if (n_hdlc->woke_up)
469 	  goto check_again;
470 
471 	if (debuglevel >= DEBUG_LEVEL_INFO)
472 		printk("%s(%d)n_hdlc_send_frames() exit\n",__FILE__,__LINE__);
473 
474 }	/* end of n_hdlc_send_frames() */
475 
476 /**
477  * n_hdlc_tty_wakeup - Callback for transmit wakeup
478  * @tty	- pointer to associated tty instance data
479  *
480  * Called when low level device driver can accept more send data.
481  */
482 static void n_hdlc_tty_wakeup(struct tty_struct *tty)
483 {
484 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
485 
486 	if (debuglevel >= DEBUG_LEVEL_INFO)
487 		printk("%s(%d)n_hdlc_tty_wakeup() called\n",__FILE__,__LINE__);
488 
489 	if (!n_hdlc)
490 		return;
491 
492 	if (tty != n_hdlc->tty) {
493 		clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
494 		return;
495 	}
496 
497 	n_hdlc_send_frames (n_hdlc, tty);
498 
499 }	/* end of n_hdlc_tty_wakeup() */
500 
501 /**
502  * n_hdlc_tty_receive - Called by tty driver when receive data is available
503  * @tty	- pointer to tty instance data
504  * @data - pointer to received data
505  * @flags - pointer to flags for data
506  * @count - count of received data in bytes
507  *
508  * Called by tty low level driver when receive data is available. Data is
509  * interpreted as one HDLC frame.
510  */
511 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data,
512 			       char *flags, int count)
513 {
514 	register struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
515 	register struct n_hdlc_buf *buf;
516 
517 	if (debuglevel >= DEBUG_LEVEL_INFO)
518 		printk("%s(%d)n_hdlc_tty_receive() called count=%d\n",
519 			__FILE__,__LINE__, count);
520 
521 	/* This can happen if stuff comes in on the backup tty */
522 	if (!n_hdlc || tty != n_hdlc->tty)
523 		return;
524 
525 	/* verify line is using HDLC discipline */
526 	if (n_hdlc->magic != HDLC_MAGIC) {
527 		printk("%s(%d) line not using HDLC discipline\n",
528 			__FILE__,__LINE__);
529 		return;
530 	}
531 
532 	if ( count>maxframe ) {
533 		if (debuglevel >= DEBUG_LEVEL_INFO)
534 			printk("%s(%d) rx count>maxframesize, data discarded\n",
535 			       __FILE__,__LINE__);
536 		return;
537 	}
538 
539 	/* get a free HDLC buffer */
540 	buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
541 	if (!buf) {
542 		/* no buffers in free list, attempt to allocate another rx buffer */
543 		/* unless the maximum count has been reached */
544 		if (n_hdlc->rx_buf_list.count < MAX_RX_BUF_COUNT)
545 			buf = kmalloc(N_HDLC_BUF_SIZE, GFP_ATOMIC);
546 	}
547 
548 	if (!buf) {
549 		if (debuglevel >= DEBUG_LEVEL_INFO)
550 			printk("%s(%d) no more rx buffers, data discarded\n",
551 			       __FILE__,__LINE__);
552 		return;
553 	}
554 
555 	/* copy received data to HDLC buffer */
556 	memcpy(buf->buf,data,count);
557 	buf->count=count;
558 
559 	/* add HDLC buffer to list of received frames */
560 	n_hdlc_buf_put(&n_hdlc->rx_buf_list, buf);
561 
562 	/* wake up any blocked reads and perform async signalling */
563 	wake_up_interruptible (&tty->read_wait);
564 	if (n_hdlc->tty->fasync != NULL)
565 		kill_fasync (&n_hdlc->tty->fasync, SIGIO, POLL_IN);
566 
567 }	/* end of n_hdlc_tty_receive() */
568 
569 /**
570  * n_hdlc_tty_read - Called to retrieve one frame of data (if available)
571  * @tty - pointer to tty instance data
572  * @file - pointer to open file object
573  * @buf - pointer to returned data buffer
574  * @nr - size of returned data buffer
575  *
576  * Returns the number of bytes returned or error code.
577  */
578 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
579 			   __u8 __user *buf, size_t nr)
580 {
581 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
582 	int ret = 0;
583 	struct n_hdlc_buf *rbuf;
584 	DECLARE_WAITQUEUE(wait, current);
585 
586 	if (debuglevel >= DEBUG_LEVEL_INFO)
587 		printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__);
588 
589 	/* Validate the pointers */
590 	if (!n_hdlc)
591 		return -EIO;
592 
593 	/* verify user access to buffer */
594 	if (!access_ok(VERIFY_WRITE, buf, nr)) {
595 		printk(KERN_WARNING "%s(%d) n_hdlc_tty_read() can't verify user "
596 		"buffer\n", __FILE__, __LINE__);
597 		return -EFAULT;
598 	}
599 
600 	add_wait_queue(&tty->read_wait, &wait);
601 
602 	for (;;) {
603 		if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
604 			ret = -EIO;
605 			break;
606 		}
607 		if (tty_hung_up_p(file))
608 			break;
609 
610 		set_current_state(TASK_INTERRUPTIBLE);
611 
612 		rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
613 		if (rbuf) {
614 			if (rbuf->count > nr) {
615 				/* too large for caller's buffer */
616 				ret = -EOVERFLOW;
617 			} else {
618 				if (copy_to_user(buf, rbuf->buf, rbuf->count))
619 					ret = -EFAULT;
620 				else
621 					ret = rbuf->count;
622 			}
623 
624 			if (n_hdlc->rx_free_buf_list.count >
625 			    DEFAULT_RX_BUF_COUNT)
626 				kfree(rbuf);
627 			else
628 				n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, rbuf);
629 			break;
630 		}
631 
632 		/* no data */
633 		if (file->f_flags & O_NONBLOCK) {
634 			ret = -EAGAIN;
635 			break;
636 		}
637 
638 		schedule();
639 
640 		if (signal_pending(current)) {
641 			ret = -EINTR;
642 			break;
643 		}
644 	}
645 
646 	remove_wait_queue(&tty->read_wait, &wait);
647 	__set_current_state(TASK_RUNNING);
648 
649 	return ret;
650 
651 }	/* end of n_hdlc_tty_read() */
652 
653 /**
654  * n_hdlc_tty_write - write a single frame of data to device
655  * @tty	- pointer to associated tty device instance data
656  * @file - pointer to file object data
657  * @data - pointer to transmit data (one frame)
658  * @count - size of transmit frame in bytes
659  *
660  * Returns the number of bytes written (or error code).
661  */
662 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
663 			    const unsigned char *data, size_t count)
664 {
665 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
666 	int error = 0;
667 	DECLARE_WAITQUEUE(wait, current);
668 	struct n_hdlc_buf *tbuf;
669 
670 	if (debuglevel >= DEBUG_LEVEL_INFO)
671 		printk("%s(%d)n_hdlc_tty_write() called count=%Zd\n",
672 			__FILE__,__LINE__,count);
673 
674 	/* Verify pointers */
675 	if (!n_hdlc)
676 		return -EIO;
677 
678 	if (n_hdlc->magic != HDLC_MAGIC)
679 		return -EIO;
680 
681 	/* verify frame size */
682 	if (count > maxframe ) {
683 		if (debuglevel & DEBUG_LEVEL_INFO)
684 			printk (KERN_WARNING
685 				"n_hdlc_tty_write: truncating user packet "
686 				"from %lu to %d\n", (unsigned long) count,
687 				maxframe );
688 		count = maxframe;
689 	}
690 
691 	add_wait_queue(&tty->write_wait, &wait);
692 
693 	for (;;) {
694 		set_current_state(TASK_INTERRUPTIBLE);
695 
696 		tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list);
697 		if (tbuf)
698 			break;
699 
700 		if (file->f_flags & O_NONBLOCK) {
701 			error = -EAGAIN;
702 			break;
703 		}
704 		schedule();
705 
706 		n_hdlc = tty2n_hdlc (tty);
707 		if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC ||
708 		    tty != n_hdlc->tty) {
709 			printk("n_hdlc_tty_write: %p invalid after wait!\n", n_hdlc);
710 			error = -EIO;
711 			break;
712 		}
713 
714 		if (signal_pending(current)) {
715 			error = -EINTR;
716 			break;
717 		}
718 	}
719 
720 	__set_current_state(TASK_RUNNING);
721 	remove_wait_queue(&tty->write_wait, &wait);
722 
723 	if (!error) {
724 		/* Retrieve the user's buffer */
725 		memcpy(tbuf->buf, data, count);
726 
727 		/* Send the data */
728 		tbuf->count = error = count;
729 		n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf);
730 		n_hdlc_send_frames(n_hdlc,tty);
731 	}
732 
733 	return error;
734 
735 }	/* end of n_hdlc_tty_write() */
736 
737 /**
738  * n_hdlc_tty_ioctl - process IOCTL system call for the tty device.
739  * @tty - pointer to tty instance data
740  * @file - pointer to open file object for device
741  * @cmd - IOCTL command code
742  * @arg - argument for IOCTL call (cmd dependent)
743  *
744  * Returns command dependent result.
745  */
746 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
747 			    unsigned int cmd, unsigned long arg)
748 {
749 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
750 	int error = 0;
751 	int count;
752 	unsigned long flags;
753 
754 	if (debuglevel >= DEBUG_LEVEL_INFO)
755 		printk("%s(%d)n_hdlc_tty_ioctl() called %d\n",
756 			__FILE__,__LINE__,cmd);
757 
758 	/* Verify the status of the device */
759 	if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC)
760 		return -EBADF;
761 
762 	switch (cmd) {
763 	case FIONREAD:
764 		/* report count of read data available */
765 		/* in next available frame (if any) */
766 		spin_lock_irqsave(&n_hdlc->rx_buf_list.spinlock,flags);
767 		if (n_hdlc->rx_buf_list.head)
768 			count = n_hdlc->rx_buf_list.head->count;
769 		else
770 			count = 0;
771 		spin_unlock_irqrestore(&n_hdlc->rx_buf_list.spinlock,flags);
772 		error = put_user(count, (int __user *)arg);
773 		break;
774 
775 	case TIOCOUTQ:
776 		/* get the pending tx byte count in the driver */
777 		count = tty_chars_in_buffer(tty);
778 		/* add size of next output frame in queue */
779 		spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock,flags);
780 		if (n_hdlc->tx_buf_list.head)
781 			count += n_hdlc->tx_buf_list.head->count;
782 		spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock,flags);
783 		error = put_user(count, (int __user *)arg);
784 		break;
785 
786 	case TCFLSH:
787 		switch (arg) {
788 		case TCIOFLUSH:
789 		case TCOFLUSH:
790 			flush_tx_queue(tty);
791 		}
792 		/* fall through to default */
793 
794 	default:
795 		error = n_tty_ioctl_helper(tty, file, cmd, arg);
796 		break;
797 	}
798 	return error;
799 
800 }	/* end of n_hdlc_tty_ioctl() */
801 
802 /**
803  * n_hdlc_tty_poll - TTY callback for poll system call
804  * @tty - pointer to tty instance data
805  * @filp - pointer to open file object for device
806  * @poll_table - wait queue for operations
807  *
808  * Determine which operations (read/write) will not block and return info
809  * to caller.
810  * Returns a bit mask containing info on which ops will not block.
811  */
812 static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
813 				    poll_table *wait)
814 {
815 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
816 	unsigned int mask = 0;
817 
818 	if (debuglevel >= DEBUG_LEVEL_INFO)
819 		printk("%s(%d)n_hdlc_tty_poll() called\n",__FILE__,__LINE__);
820 
821 	if (n_hdlc && n_hdlc->magic == HDLC_MAGIC && tty == n_hdlc->tty) {
822 		/* queue current process into any wait queue that */
823 		/* may awaken in the future (read and write) */
824 
825 		poll_wait(filp, &tty->read_wait, wait);
826 		poll_wait(filp, &tty->write_wait, wait);
827 
828 		/* set bits for operations that won't block */
829 		if (n_hdlc->rx_buf_list.head)
830 			mask |= POLLIN | POLLRDNORM;	/* readable */
831 		if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
832 			mask |= POLLHUP;
833 		if (tty_hung_up_p(filp))
834 			mask |= POLLHUP;
835 		if (!tty_is_writelocked(tty) &&
836 				n_hdlc->tx_free_buf_list.head)
837 			mask |= POLLOUT | POLLWRNORM;	/* writable */
838 	}
839 	return mask;
840 }	/* end of n_hdlc_tty_poll() */
841 
842 /**
843  * n_hdlc_alloc - allocate an n_hdlc instance data structure
844  *
845  * Returns a pointer to newly created structure if success, otherwise %NULL
846  */
847 static struct n_hdlc *n_hdlc_alloc(void)
848 {
849 	struct n_hdlc_buf *buf;
850 	int i;
851 	struct n_hdlc *n_hdlc = kzalloc(sizeof(*n_hdlc), GFP_KERNEL);
852 
853 	if (!n_hdlc)
854 		return NULL;
855 
856 	n_hdlc_buf_list_init(&n_hdlc->rx_free_buf_list);
857 	n_hdlc_buf_list_init(&n_hdlc->tx_free_buf_list);
858 	n_hdlc_buf_list_init(&n_hdlc->rx_buf_list);
859 	n_hdlc_buf_list_init(&n_hdlc->tx_buf_list);
860 
861 	/* allocate free rx buffer list */
862 	for(i=0;i<DEFAULT_RX_BUF_COUNT;i++) {
863 		buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
864 		if (buf)
865 			n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,buf);
866 		else if (debuglevel >= DEBUG_LEVEL_INFO)
867 			printk("%s(%d)n_hdlc_alloc(), kalloc() failed for rx buffer %d\n",__FILE__,__LINE__, i);
868 	}
869 
870 	/* allocate free tx buffer list */
871 	for(i=0;i<DEFAULT_TX_BUF_COUNT;i++) {
872 		buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
873 		if (buf)
874 			n_hdlc_buf_put(&n_hdlc->tx_free_buf_list,buf);
875 		else if (debuglevel >= DEBUG_LEVEL_INFO)
876 			printk("%s(%d)n_hdlc_alloc(), kalloc() failed for tx buffer %d\n",__FILE__,__LINE__, i);
877 	}
878 
879 	/* Initialize the control block */
880 	n_hdlc->magic  = HDLC_MAGIC;
881 	n_hdlc->flags  = 0;
882 
883 	return n_hdlc;
884 
885 }	/* end of n_hdlc_alloc() */
886 
887 /**
888  * n_hdlc_buf_list_init - initialize specified HDLC buffer list
889  * @list - pointer to buffer list
890  */
891 static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list)
892 {
893 	memset(list, 0, sizeof(*list));
894 	spin_lock_init(&list->spinlock);
895 }	/* end of n_hdlc_buf_list_init() */
896 
897 /**
898  * n_hdlc_buf_put - add specified HDLC buffer to tail of specified list
899  * @list - pointer to buffer list
900  * @buf	- pointer to buffer
901  */
902 static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
903 			   struct n_hdlc_buf *buf)
904 {
905 	unsigned long flags;
906 	spin_lock_irqsave(&list->spinlock,flags);
907 
908 	buf->link=NULL;
909 	if (list->tail)
910 		list->tail->link = buf;
911 	else
912 		list->head = buf;
913 	list->tail = buf;
914 	(list->count)++;
915 
916 	spin_unlock_irqrestore(&list->spinlock,flags);
917 
918 }	/* end of n_hdlc_buf_put() */
919 
920 /**
921  * n_hdlc_buf_get - remove and return an HDLC buffer from list
922  * @list - pointer to HDLC buffer list
923  *
924  * Remove and return an HDLC buffer from the head of the specified HDLC buffer
925  * list.
926  * Returns a pointer to HDLC buffer if available, otherwise %NULL.
927  */
928 static struct n_hdlc_buf* n_hdlc_buf_get(struct n_hdlc_buf_list *list)
929 {
930 	unsigned long flags;
931 	struct n_hdlc_buf *buf;
932 	spin_lock_irqsave(&list->spinlock,flags);
933 
934 	buf = list->head;
935 	if (buf) {
936 		list->head = buf->link;
937 		(list->count)--;
938 	}
939 	if (!list->head)
940 		list->tail = NULL;
941 
942 	spin_unlock_irqrestore(&list->spinlock,flags);
943 	return buf;
944 
945 }	/* end of n_hdlc_buf_get() */
946 
947 static char hdlc_banner[] __initdata =
948 	KERN_INFO "HDLC line discipline maxframe=%u\n";
949 static char hdlc_register_ok[] __initdata =
950 	KERN_INFO "N_HDLC line discipline registered.\n";
951 static char hdlc_register_fail[] __initdata =
952 	KERN_ERR "error registering line discipline: %d\n";
953 
954 static int __init n_hdlc_init(void)
955 {
956 	int status;
957 
958 	/* range check maxframe arg */
959 	if (maxframe < 4096)
960 		maxframe = 4096;
961 	else if (maxframe > 65535)
962 		maxframe = 65535;
963 
964 	printk(hdlc_banner, maxframe);
965 
966 	status = tty_register_ldisc(N_HDLC, &n_hdlc_ldisc);
967 	if (!status)
968 		printk(hdlc_register_ok);
969 	else
970 		printk(hdlc_register_fail, status);
971 
972 	return status;
973 
974 }	/* end of init_module() */
975 
976 static char hdlc_unregister_ok[] __exitdata =
977 	KERN_INFO "N_HDLC: line discipline unregistered\n";
978 static char hdlc_unregister_fail[] __exitdata =
979 	KERN_ERR "N_HDLC: can't unregister line discipline (err = %d)\n";
980 
981 static void __exit n_hdlc_exit(void)
982 {
983 	/* Release tty registration of line discipline */
984 	int status = tty_unregister_ldisc(N_HDLC);
985 
986 	if (status)
987 		printk(hdlc_unregister_fail, status);
988 	else
989 		printk(hdlc_unregister_ok);
990 }
991 
992 module_init(n_hdlc_init);
993 module_exit(n_hdlc_exit);
994 
995 MODULE_LICENSE("GPL");
996 MODULE_AUTHOR("Paul Fulghum paulkf@microgate.com");
997 module_param(debuglevel, int, 0);
998 module_param(maxframe, int, 0);
999 MODULE_ALIAS_LDISC(N_HDLC);
1000