xref: /openbmc/linux/drivers/tty/n_hdlc.c (revision 7490ca1e)
1 /* generic HDLC line discipline for Linux
2  *
3  * Written by Paul Fulghum paulkf@microgate.com
4  * for Microgate Corporation
5  *
6  * Microgate and SyncLink are registered trademarks of Microgate Corporation
7  *
8  * Adapted from ppp.c, written by Michael Callahan <callahan@maths.ox.ac.uk>,
9  *	Al Longyear <longyear@netcom.com>,
10  *	Paul Mackerras <Paul.Mackerras@cs.anu.edu.au>
11  *
12  * Original release 01/11/99
13  *
14  * This code is released under the GNU General Public License (GPL)
15  *
16  * This module implements the tty line discipline N_HDLC for use with
17  * tty device drivers that support bit-synchronous HDLC communications.
18  *
19  * All HDLC data is frame oriented which means:
20  *
21  * 1. tty write calls represent one complete transmit frame of data
22  *    The device driver should accept the complete frame or none of
23  *    the frame (busy) in the write method. Each write call should have
24  *    a byte count in the range of 2-65535 bytes (2 is min HDLC frame
25  *    with 1 addr byte and 1 ctrl byte). The max byte count of 65535
26  *    should include any crc bytes required. For example, when using
27  *    CCITT CRC32, 4 crc bytes are required, so the maximum size frame
28  *    the application may transmit is limited to 65531 bytes. For CCITT
29  *    CRC16, the maximum application frame size would be 65533.
30  *
31  *
32  * 2. receive callbacks from the device driver represents
33  *    one received frame. The device driver should bypass
34  *    the tty flip buffer and call the line discipline receive
35  *    callback directly to avoid fragmenting or concatenating
36  *    multiple frames into a single receive callback.
37  *
38  *    The HDLC line discipline queues the receive frames in separate
39  *    buffers so complete receive frames can be returned by the
40  *    tty read calls.
41  *
42  * 3. tty read calls returns an entire frame of data or nothing.
43  *
44  * 4. all send and receive data is considered raw. No processing
45  *    or translation is performed by the line discipline, regardless
46  *    of the tty flags
47  *
48  * 5. When line discipline is queried for the amount of receive
49  *    data available (FIOC), 0 is returned if no data available,
50  *    otherwise the count of the next available frame is returned.
51  *    (instead of the sum of all received frame counts).
52  *
53  * These conventions allow the standard tty programming interface
54  * to be used for synchronous HDLC applications when used with
55  * this line discipline (or another line discipline that is frame
56  * oriented such as N_PPP).
57  *
58  * The SyncLink driver (synclink.c) implements both asynchronous
59  * (using standard line discipline N_TTY) and synchronous HDLC
60  * (using N_HDLC) communications, with the latter using the above
61  * conventions.
62  *
63  * This implementation is very basic and does not maintain
64  * any statistics. The main point is to enforce the raw data
65  * and frame orientation of HDLC communications.
66  *
67  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
68  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
69  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
70  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
71  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
72  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
73  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
74  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
75  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
76  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
77  * OF THE POSSIBILITY OF SUCH DAMAGE.
78  */
79 
80 #define HDLC_MAGIC 0x239e
81 
82 #include <linux/module.h>
83 #include <linux/init.h>
84 #include <linux/kernel.h>
85 #include <linux/sched.h>
86 #include <linux/types.h>
87 #include <linux/fcntl.h>
88 #include <linux/interrupt.h>
89 #include <linux/ptrace.h>
90 
91 #undef VERSION
92 #define VERSION(major,minor,patch) (((((major)<<8)+(minor))<<8)+(patch))
93 
94 #include <linux/poll.h>
95 #include <linux/in.h>
96 #include <linux/ioctl.h>
97 #include <linux/slab.h>
98 #include <linux/tty.h>
99 #include <linux/errno.h>
100 #include <linux/string.h>	/* used in new tty drivers */
101 #include <linux/signal.h>	/* used in new tty drivers */
102 #include <linux/if.h>
103 #include <linux/bitops.h>
104 
105 #include <asm/system.h>
106 #include <asm/termios.h>
107 #include <asm/uaccess.h>
108 
109 /*
110  * Buffers for individual HDLC frames
111  */
112 #define MAX_HDLC_FRAME_SIZE 65535
113 #define DEFAULT_RX_BUF_COUNT 10
114 #define MAX_RX_BUF_COUNT 60
115 #define DEFAULT_TX_BUF_COUNT 3
116 
117 struct n_hdlc_buf {
118 	struct n_hdlc_buf *link;
119 	int		  count;
120 	char		  buf[1];
121 };
122 
123 #define	N_HDLC_BUF_SIZE	(sizeof(struct n_hdlc_buf) + maxframe)
124 
125 struct n_hdlc_buf_list {
126 	struct n_hdlc_buf *head;
127 	struct n_hdlc_buf *tail;
128 	int		  count;
129 	spinlock_t	  spinlock;
130 };
131 
132 /**
133  * struct n_hdlc - per device instance data structure
134  * @magic - magic value for structure
135  * @flags - miscellaneous control flags
136  * @tty - ptr to TTY structure
137  * @backup_tty - TTY to use if tty gets closed
138  * @tbusy - reentrancy flag for tx wakeup code
139  * @woke_up - FIXME: describe this field
140  * @tbuf - currently transmitting tx buffer
141  * @tx_buf_list - list of pending transmit frame buffers
142  * @rx_buf_list - list of received frame buffers
143  * @tx_free_buf_list - list unused transmit frame buffers
144  * @rx_free_buf_list - list unused received frame buffers
145  */
146 struct n_hdlc {
147 	int			magic;
148 	__u32			flags;
149 	struct tty_struct	*tty;
150 	struct tty_struct	*backup_tty;
151 	int			tbusy;
152 	int			woke_up;
153 	struct n_hdlc_buf	*tbuf;
154 	struct n_hdlc_buf_list	tx_buf_list;
155 	struct n_hdlc_buf_list	rx_buf_list;
156 	struct n_hdlc_buf_list	tx_free_buf_list;
157 	struct n_hdlc_buf_list	rx_free_buf_list;
158 };
159 
160 /*
161  * HDLC buffer list manipulation functions
162  */
163 static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list);
164 static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
165 			   struct n_hdlc_buf *buf);
166 static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *list);
167 
168 /* Local functions */
169 
170 static struct n_hdlc *n_hdlc_alloc (void);
171 
172 /* debug level can be set by insmod for debugging purposes */
173 #define DEBUG_LEVEL_INFO	1
174 static int debuglevel;
175 
176 /* max frame size for memory allocations */
177 static int maxframe = 4096;
178 
179 /* TTY callbacks */
180 
181 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
182 			   __u8 __user *buf, size_t nr);
183 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
184 			    const unsigned char *buf, size_t nr);
185 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
186 			    unsigned int cmd, unsigned long arg);
187 static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
188 				    poll_table *wait);
189 static int n_hdlc_tty_open(struct tty_struct *tty);
190 static void n_hdlc_tty_close(struct tty_struct *tty);
191 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *cp,
192 			       char *fp, int count);
193 static void n_hdlc_tty_wakeup(struct tty_struct *tty);
194 
195 #define bset(p,b)	((p)[(b) >> 5] |= (1 << ((b) & 0x1f)))
196 
197 #define tty2n_hdlc(tty)	((struct n_hdlc *) ((tty)->disc_data))
198 #define n_hdlc2tty(n_hdlc)	((n_hdlc)->tty)
199 
200 static void flush_rx_queue(struct tty_struct *tty)
201 {
202 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
203 	struct n_hdlc_buf *buf;
204 
205 	while ((buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list)))
206 		n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, buf);
207 }
208 
209 static void flush_tx_queue(struct tty_struct *tty)
210 {
211 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
212 	struct n_hdlc_buf *buf;
213 	unsigned long flags;
214 
215 	while ((buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list)))
216 		n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, buf);
217  	spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
218 	if (n_hdlc->tbuf) {
219 		n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, n_hdlc->tbuf);
220 		n_hdlc->tbuf = NULL;
221 	}
222 	spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
223 }
224 
225 static struct tty_ldisc_ops n_hdlc_ldisc = {
226 	.owner		= THIS_MODULE,
227 	.magic		= TTY_LDISC_MAGIC,
228 	.name		= "hdlc",
229 	.open		= n_hdlc_tty_open,
230 	.close		= n_hdlc_tty_close,
231 	.read		= n_hdlc_tty_read,
232 	.write		= n_hdlc_tty_write,
233 	.ioctl		= n_hdlc_tty_ioctl,
234 	.poll		= n_hdlc_tty_poll,
235 	.receive_buf	= n_hdlc_tty_receive,
236 	.write_wakeup	= n_hdlc_tty_wakeup,
237 	.flush_buffer   = flush_rx_queue,
238 };
239 
240 /**
241  * n_hdlc_release - release an n_hdlc per device line discipline info structure
242  * @n_hdlc - per device line discipline info structure
243  */
244 static void n_hdlc_release(struct n_hdlc *n_hdlc)
245 {
246 	struct tty_struct *tty = n_hdlc2tty (n_hdlc);
247 	struct n_hdlc_buf *buf;
248 
249 	if (debuglevel >= DEBUG_LEVEL_INFO)
250 		printk("%s(%d)n_hdlc_release() called\n",__FILE__,__LINE__);
251 
252 	/* Ensure that the n_hdlcd process is not hanging on select()/poll() */
253 	wake_up_interruptible (&tty->read_wait);
254 	wake_up_interruptible (&tty->write_wait);
255 
256 	if (tty->disc_data == n_hdlc)
257 		tty->disc_data = NULL;	/* Break the tty->n_hdlc link */
258 
259 	/* Release transmit and receive buffers */
260 	for(;;) {
261 		buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
262 		if (buf) {
263 			kfree(buf);
264 		} else
265 			break;
266 	}
267 	for(;;) {
268 		buf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list);
269 		if (buf) {
270 			kfree(buf);
271 		} else
272 			break;
273 	}
274 	for(;;) {
275 		buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
276 		if (buf) {
277 			kfree(buf);
278 		} else
279 			break;
280 	}
281 	for(;;) {
282 		buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
283 		if (buf) {
284 			kfree(buf);
285 		} else
286 			break;
287 	}
288 	kfree(n_hdlc->tbuf);
289 	kfree(n_hdlc);
290 
291 }	/* end of n_hdlc_release() */
292 
293 /**
294  * n_hdlc_tty_close - line discipline close
295  * @tty - pointer to tty info structure
296  *
297  * Called when the line discipline is changed to something
298  * else, the tty is closed, or the tty detects a hangup.
299  */
300 static void n_hdlc_tty_close(struct tty_struct *tty)
301 {
302 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
303 
304 	if (debuglevel >= DEBUG_LEVEL_INFO)
305 		printk("%s(%d)n_hdlc_tty_close() called\n",__FILE__,__LINE__);
306 
307 	if (n_hdlc != NULL) {
308 		if (n_hdlc->magic != HDLC_MAGIC) {
309 			printk (KERN_WARNING"n_hdlc: trying to close unopened tty!\n");
310 			return;
311 		}
312 #if defined(TTY_NO_WRITE_SPLIT)
313 		clear_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
314 #endif
315 		tty->disc_data = NULL;
316 		if (tty == n_hdlc->backup_tty)
317 			n_hdlc->backup_tty = NULL;
318 		if (tty != n_hdlc->tty)
319 			return;
320 		if (n_hdlc->backup_tty) {
321 			n_hdlc->tty = n_hdlc->backup_tty;
322 		} else {
323 			n_hdlc_release (n_hdlc);
324 		}
325 	}
326 
327 	if (debuglevel >= DEBUG_LEVEL_INFO)
328 		printk("%s(%d)n_hdlc_tty_close() success\n",__FILE__,__LINE__);
329 
330 }	/* end of n_hdlc_tty_close() */
331 
332 /**
333  * n_hdlc_tty_open - called when line discipline changed to n_hdlc
334  * @tty - pointer to tty info structure
335  *
336  * Returns 0 if success, otherwise error code
337  */
338 static int n_hdlc_tty_open (struct tty_struct *tty)
339 {
340 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
341 
342 	if (debuglevel >= DEBUG_LEVEL_INFO)
343 		printk("%s(%d)n_hdlc_tty_open() called (device=%s)\n",
344 		__FILE__,__LINE__,
345 		tty->name);
346 
347 	/* There should not be an existing table for this slot. */
348 	if (n_hdlc) {
349 		printk (KERN_ERR"n_hdlc_tty_open:tty already associated!\n" );
350 		return -EEXIST;
351 	}
352 
353 	n_hdlc = n_hdlc_alloc();
354 	if (!n_hdlc) {
355 		printk (KERN_ERR "n_hdlc_alloc failed\n");
356 		return -ENFILE;
357 	}
358 
359 	tty->disc_data = n_hdlc;
360 	n_hdlc->tty    = tty;
361 	tty->receive_room = 65536;
362 
363 #if defined(TTY_NO_WRITE_SPLIT)
364 	/* change tty_io write() to not split large writes into 8K chunks */
365 	set_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
366 #endif
367 
368 	/* flush receive data from driver */
369 	tty_driver_flush_buffer(tty);
370 
371 	if (debuglevel >= DEBUG_LEVEL_INFO)
372 		printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__,__LINE__);
373 
374 	return 0;
375 
376 }	/* end of n_tty_hdlc_open() */
377 
378 /**
379  * n_hdlc_send_frames - send frames on pending send buffer list
380  * @n_hdlc - pointer to ldisc instance data
381  * @tty - pointer to tty instance data
382  *
383  * Send frames on pending send buffer list until the driver does not accept a
384  * frame (busy) this function is called after adding a frame to the send buffer
385  * list and by the tty wakeup callback.
386  */
387 static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
388 {
389 	register int actual;
390 	unsigned long flags;
391 	struct n_hdlc_buf *tbuf;
392 
393 	if (debuglevel >= DEBUG_LEVEL_INFO)
394 		printk("%s(%d)n_hdlc_send_frames() called\n",__FILE__,__LINE__);
395  check_again:
396 
397  	spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
398 	if (n_hdlc->tbusy) {
399 		n_hdlc->woke_up = 1;
400  		spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
401 		return;
402 	}
403 	n_hdlc->tbusy = 1;
404 	n_hdlc->woke_up = 0;
405 	spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
406 
407 	/* get current transmit buffer or get new transmit */
408 	/* buffer from list of pending transmit buffers */
409 
410 	tbuf = n_hdlc->tbuf;
411 	if (!tbuf)
412 		tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
413 
414 	while (tbuf) {
415 		if (debuglevel >= DEBUG_LEVEL_INFO)
416 			printk("%s(%d)sending frame %p, count=%d\n",
417 				__FILE__,__LINE__,tbuf,tbuf->count);
418 
419 		/* Send the next block of data to device */
420 		set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
421 		actual = tty->ops->write(tty, tbuf->buf, tbuf->count);
422 
423 		/* rollback was possible and has been done */
424 		if (actual == -ERESTARTSYS) {
425 			n_hdlc->tbuf = tbuf;
426 			break;
427 		}
428 		/* if transmit error, throw frame away by */
429 		/* pretending it was accepted by driver */
430 		if (actual < 0)
431 			actual = tbuf->count;
432 
433 		if (actual == tbuf->count) {
434 			if (debuglevel >= DEBUG_LEVEL_INFO)
435 				printk("%s(%d)frame %p completed\n",
436 					__FILE__,__LINE__,tbuf);
437 
438 			/* free current transmit buffer */
439 			n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, tbuf);
440 
441 			/* this tx buffer is done */
442 			n_hdlc->tbuf = NULL;
443 
444 			/* wait up sleeping writers */
445 			wake_up_interruptible(&tty->write_wait);
446 
447 			/* get next pending transmit buffer */
448 			tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
449 		} else {
450 			if (debuglevel >= DEBUG_LEVEL_INFO)
451 				printk("%s(%d)frame %p pending\n",
452 					__FILE__,__LINE__,tbuf);
453 
454 			/* buffer not accepted by driver */
455 			/* set this buffer as pending buffer */
456 			n_hdlc->tbuf = tbuf;
457 			break;
458 		}
459 	}
460 
461 	if (!tbuf)
462 		clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
463 
464 	/* Clear the re-entry flag */
465 	spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
466 	n_hdlc->tbusy = 0;
467 	spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
468 
469         if (n_hdlc->woke_up)
470 	  goto check_again;
471 
472 	if (debuglevel >= DEBUG_LEVEL_INFO)
473 		printk("%s(%d)n_hdlc_send_frames() exit\n",__FILE__,__LINE__);
474 
475 }	/* end of n_hdlc_send_frames() */
476 
477 /**
478  * n_hdlc_tty_wakeup - Callback for transmit wakeup
479  * @tty	- pointer to associated tty instance data
480  *
481  * Called when low level device driver can accept more send data.
482  */
483 static void n_hdlc_tty_wakeup(struct tty_struct *tty)
484 {
485 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
486 
487 	if (debuglevel >= DEBUG_LEVEL_INFO)
488 		printk("%s(%d)n_hdlc_tty_wakeup() called\n",__FILE__,__LINE__);
489 
490 	if (!n_hdlc)
491 		return;
492 
493 	if (tty != n_hdlc->tty) {
494 		clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
495 		return;
496 	}
497 
498 	n_hdlc_send_frames (n_hdlc, tty);
499 
500 }	/* end of n_hdlc_tty_wakeup() */
501 
502 /**
503  * n_hdlc_tty_receive - Called by tty driver when receive data is available
504  * @tty	- pointer to tty instance data
505  * @data - pointer to received data
506  * @flags - pointer to flags for data
507  * @count - count of received data in bytes
508  *
509  * Called by tty low level driver when receive data is available. Data is
510  * interpreted as one HDLC frame.
511  */
512 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data,
513 			       char *flags, int count)
514 {
515 	register struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
516 	register struct n_hdlc_buf *buf;
517 
518 	if (debuglevel >= DEBUG_LEVEL_INFO)
519 		printk("%s(%d)n_hdlc_tty_receive() called count=%d\n",
520 			__FILE__,__LINE__, count);
521 
522 	/* This can happen if stuff comes in on the backup tty */
523 	if (!n_hdlc || tty != n_hdlc->tty)
524 		return;
525 
526 	/* verify line is using HDLC discipline */
527 	if (n_hdlc->magic != HDLC_MAGIC) {
528 		printk("%s(%d) line not using HDLC discipline\n",
529 			__FILE__,__LINE__);
530 		return;
531 	}
532 
533 	if ( count>maxframe ) {
534 		if (debuglevel >= DEBUG_LEVEL_INFO)
535 			printk("%s(%d) rx count>maxframesize, data discarded\n",
536 			       __FILE__,__LINE__);
537 		return;
538 	}
539 
540 	/* get a free HDLC buffer */
541 	buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
542 	if (!buf) {
543 		/* no buffers in free list, attempt to allocate another rx buffer */
544 		/* unless the maximum count has been reached */
545 		if (n_hdlc->rx_buf_list.count < MAX_RX_BUF_COUNT)
546 			buf = kmalloc(N_HDLC_BUF_SIZE, GFP_ATOMIC);
547 	}
548 
549 	if (!buf) {
550 		if (debuglevel >= DEBUG_LEVEL_INFO)
551 			printk("%s(%d) no more rx buffers, data discarded\n",
552 			       __FILE__,__LINE__);
553 		return;
554 	}
555 
556 	/* copy received data to HDLC buffer */
557 	memcpy(buf->buf,data,count);
558 	buf->count=count;
559 
560 	/* add HDLC buffer to list of received frames */
561 	n_hdlc_buf_put(&n_hdlc->rx_buf_list, buf);
562 
563 	/* wake up any blocked reads and perform async signalling */
564 	wake_up_interruptible (&tty->read_wait);
565 	if (n_hdlc->tty->fasync != NULL)
566 		kill_fasync (&n_hdlc->tty->fasync, SIGIO, POLL_IN);
567 
568 }	/* end of n_hdlc_tty_receive() */
569 
570 /**
571  * n_hdlc_tty_read - Called to retrieve one frame of data (if available)
572  * @tty - pointer to tty instance data
573  * @file - pointer to open file object
574  * @buf - pointer to returned data buffer
575  * @nr - size of returned data buffer
576  *
577  * Returns the number of bytes returned or error code.
578  */
579 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
580 			   __u8 __user *buf, size_t nr)
581 {
582 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
583 	int ret = 0;
584 	struct n_hdlc_buf *rbuf;
585 	DECLARE_WAITQUEUE(wait, current);
586 
587 	if (debuglevel >= DEBUG_LEVEL_INFO)
588 		printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__);
589 
590 	/* Validate the pointers */
591 	if (!n_hdlc)
592 		return -EIO;
593 
594 	/* verify user access to buffer */
595 	if (!access_ok(VERIFY_WRITE, buf, nr)) {
596 		printk(KERN_WARNING "%s(%d) n_hdlc_tty_read() can't verify user "
597 		"buffer\n", __FILE__, __LINE__);
598 		return -EFAULT;
599 	}
600 
601 	add_wait_queue(&tty->read_wait, &wait);
602 
603 	for (;;) {
604 		if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
605 			ret = -EIO;
606 			break;
607 		}
608 		if (tty_hung_up_p(file))
609 			break;
610 
611 		set_current_state(TASK_INTERRUPTIBLE);
612 
613 		rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
614 		if (rbuf) {
615 			if (rbuf->count > nr) {
616 				/* too large for caller's buffer */
617 				ret = -EOVERFLOW;
618 			} else {
619 				if (copy_to_user(buf, rbuf->buf, rbuf->count))
620 					ret = -EFAULT;
621 				else
622 					ret = rbuf->count;
623 			}
624 
625 			if (n_hdlc->rx_free_buf_list.count >
626 			    DEFAULT_RX_BUF_COUNT)
627 				kfree(rbuf);
628 			else
629 				n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, rbuf);
630 			break;
631 		}
632 
633 		/* no data */
634 		if (file->f_flags & O_NONBLOCK) {
635 			ret = -EAGAIN;
636 			break;
637 		}
638 
639 		schedule();
640 
641 		if (signal_pending(current)) {
642 			ret = -EINTR;
643 			break;
644 		}
645 	}
646 
647 	remove_wait_queue(&tty->read_wait, &wait);
648 	__set_current_state(TASK_RUNNING);
649 
650 	return ret;
651 
652 }	/* end of n_hdlc_tty_read() */
653 
654 /**
655  * n_hdlc_tty_write - write a single frame of data to device
656  * @tty	- pointer to associated tty device instance data
657  * @file - pointer to file object data
658  * @data - pointer to transmit data (one frame)
659  * @count - size of transmit frame in bytes
660  *
661  * Returns the number of bytes written (or error code).
662  */
663 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
664 			    const unsigned char *data, size_t count)
665 {
666 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
667 	int error = 0;
668 	DECLARE_WAITQUEUE(wait, current);
669 	struct n_hdlc_buf *tbuf;
670 
671 	if (debuglevel >= DEBUG_LEVEL_INFO)
672 		printk("%s(%d)n_hdlc_tty_write() called count=%Zd\n",
673 			__FILE__,__LINE__,count);
674 
675 	/* Verify pointers */
676 	if (!n_hdlc)
677 		return -EIO;
678 
679 	if (n_hdlc->magic != HDLC_MAGIC)
680 		return -EIO;
681 
682 	/* verify frame size */
683 	if (count > maxframe ) {
684 		if (debuglevel & DEBUG_LEVEL_INFO)
685 			printk (KERN_WARNING
686 				"n_hdlc_tty_write: truncating user packet "
687 				"from %lu to %d\n", (unsigned long) count,
688 				maxframe );
689 		count = maxframe;
690 	}
691 
692 	add_wait_queue(&tty->write_wait, &wait);
693 
694 	for (;;) {
695 		set_current_state(TASK_INTERRUPTIBLE);
696 
697 		tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list);
698 		if (tbuf)
699 			break;
700 
701 		if (file->f_flags & O_NONBLOCK) {
702 			error = -EAGAIN;
703 			break;
704 		}
705 		schedule();
706 
707 		n_hdlc = tty2n_hdlc (tty);
708 		if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC ||
709 		    tty != n_hdlc->tty) {
710 			printk("n_hdlc_tty_write: %p invalid after wait!\n", n_hdlc);
711 			error = -EIO;
712 			break;
713 		}
714 
715 		if (signal_pending(current)) {
716 			error = -EINTR;
717 			break;
718 		}
719 	}
720 
721 	__set_current_state(TASK_RUNNING);
722 	remove_wait_queue(&tty->write_wait, &wait);
723 
724 	if (!error) {
725 		/* Retrieve the user's buffer */
726 		memcpy(tbuf->buf, data, count);
727 
728 		/* Send the data */
729 		tbuf->count = error = count;
730 		n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf);
731 		n_hdlc_send_frames(n_hdlc,tty);
732 	}
733 
734 	return error;
735 
736 }	/* end of n_hdlc_tty_write() */
737 
738 /**
739  * n_hdlc_tty_ioctl - process IOCTL system call for the tty device.
740  * @tty - pointer to tty instance data
741  * @file - pointer to open file object for device
742  * @cmd - IOCTL command code
743  * @arg - argument for IOCTL call (cmd dependent)
744  *
745  * Returns command dependent result.
746  */
747 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
748 			    unsigned int cmd, unsigned long arg)
749 {
750 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
751 	int error = 0;
752 	int count;
753 	unsigned long flags;
754 
755 	if (debuglevel >= DEBUG_LEVEL_INFO)
756 		printk("%s(%d)n_hdlc_tty_ioctl() called %d\n",
757 			__FILE__,__LINE__,cmd);
758 
759 	/* Verify the status of the device */
760 	if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC)
761 		return -EBADF;
762 
763 	switch (cmd) {
764 	case FIONREAD:
765 		/* report count of read data available */
766 		/* in next available frame (if any) */
767 		spin_lock_irqsave(&n_hdlc->rx_buf_list.spinlock,flags);
768 		if (n_hdlc->rx_buf_list.head)
769 			count = n_hdlc->rx_buf_list.head->count;
770 		else
771 			count = 0;
772 		spin_unlock_irqrestore(&n_hdlc->rx_buf_list.spinlock,flags);
773 		error = put_user(count, (int __user *)arg);
774 		break;
775 
776 	case TIOCOUTQ:
777 		/* get the pending tx byte count in the driver */
778 		count = tty_chars_in_buffer(tty);
779 		/* add size of next output frame in queue */
780 		spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock,flags);
781 		if (n_hdlc->tx_buf_list.head)
782 			count += n_hdlc->tx_buf_list.head->count;
783 		spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock,flags);
784 		error = put_user(count, (int __user *)arg);
785 		break;
786 
787 	case TCFLSH:
788 		switch (arg) {
789 		case TCIOFLUSH:
790 		case TCOFLUSH:
791 			flush_tx_queue(tty);
792 		}
793 		/* fall through to default */
794 
795 	default:
796 		error = n_tty_ioctl_helper(tty, file, cmd, arg);
797 		break;
798 	}
799 	return error;
800 
801 }	/* end of n_hdlc_tty_ioctl() */
802 
803 /**
804  * n_hdlc_tty_poll - TTY callback for poll system call
805  * @tty - pointer to tty instance data
806  * @filp - pointer to open file object for device
807  * @poll_table - wait queue for operations
808  *
809  * Determine which operations (read/write) will not block and return info
810  * to caller.
811  * Returns a bit mask containing info on which ops will not block.
812  */
813 static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
814 				    poll_table *wait)
815 {
816 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
817 	unsigned int mask = 0;
818 
819 	if (debuglevel >= DEBUG_LEVEL_INFO)
820 		printk("%s(%d)n_hdlc_tty_poll() called\n",__FILE__,__LINE__);
821 
822 	if (n_hdlc && n_hdlc->magic == HDLC_MAGIC && tty == n_hdlc->tty) {
823 		/* queue current process into any wait queue that */
824 		/* may awaken in the future (read and write) */
825 
826 		poll_wait(filp, &tty->read_wait, wait);
827 		poll_wait(filp, &tty->write_wait, wait);
828 
829 		/* set bits for operations that won't block */
830 		if (n_hdlc->rx_buf_list.head)
831 			mask |= POLLIN | POLLRDNORM;	/* readable */
832 		if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
833 			mask |= POLLHUP;
834 		if (tty_hung_up_p(filp))
835 			mask |= POLLHUP;
836 		if (!tty_is_writelocked(tty) &&
837 				n_hdlc->tx_free_buf_list.head)
838 			mask |= POLLOUT | POLLWRNORM;	/* writable */
839 	}
840 	return mask;
841 }	/* end of n_hdlc_tty_poll() */
842 
843 /**
844  * n_hdlc_alloc - allocate an n_hdlc instance data structure
845  *
846  * Returns a pointer to newly created structure if success, otherwise %NULL
847  */
848 static struct n_hdlc *n_hdlc_alloc(void)
849 {
850 	struct n_hdlc_buf *buf;
851 	int i;
852 	struct n_hdlc *n_hdlc = kmalloc(sizeof(*n_hdlc), GFP_KERNEL);
853 
854 	if (!n_hdlc)
855 		return NULL;
856 
857 	memset(n_hdlc, 0, sizeof(*n_hdlc));
858 
859 	n_hdlc_buf_list_init(&n_hdlc->rx_free_buf_list);
860 	n_hdlc_buf_list_init(&n_hdlc->tx_free_buf_list);
861 	n_hdlc_buf_list_init(&n_hdlc->rx_buf_list);
862 	n_hdlc_buf_list_init(&n_hdlc->tx_buf_list);
863 
864 	/* allocate free rx buffer list */
865 	for(i=0;i<DEFAULT_RX_BUF_COUNT;i++) {
866 		buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
867 		if (buf)
868 			n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,buf);
869 		else if (debuglevel >= DEBUG_LEVEL_INFO)
870 			printk("%s(%d)n_hdlc_alloc(), kalloc() failed for rx buffer %d\n",__FILE__,__LINE__, i);
871 	}
872 
873 	/* allocate free tx buffer list */
874 	for(i=0;i<DEFAULT_TX_BUF_COUNT;i++) {
875 		buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
876 		if (buf)
877 			n_hdlc_buf_put(&n_hdlc->tx_free_buf_list,buf);
878 		else if (debuglevel >= DEBUG_LEVEL_INFO)
879 			printk("%s(%d)n_hdlc_alloc(), kalloc() failed for tx buffer %d\n",__FILE__,__LINE__, i);
880 	}
881 
882 	/* Initialize the control block */
883 	n_hdlc->magic  = HDLC_MAGIC;
884 	n_hdlc->flags  = 0;
885 
886 	return n_hdlc;
887 
888 }	/* end of n_hdlc_alloc() */
889 
890 /**
891  * n_hdlc_buf_list_init - initialize specified HDLC buffer list
892  * @list - pointer to buffer list
893  */
894 static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list)
895 {
896 	memset(list, 0, sizeof(*list));
897 	spin_lock_init(&list->spinlock);
898 }	/* end of n_hdlc_buf_list_init() */
899 
900 /**
901  * n_hdlc_buf_put - add specified HDLC buffer to tail of specified list
902  * @list - pointer to buffer list
903  * @buf	- pointer to buffer
904  */
905 static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
906 			   struct n_hdlc_buf *buf)
907 {
908 	unsigned long flags;
909 	spin_lock_irqsave(&list->spinlock,flags);
910 
911 	buf->link=NULL;
912 	if (list->tail)
913 		list->tail->link = buf;
914 	else
915 		list->head = buf;
916 	list->tail = buf;
917 	(list->count)++;
918 
919 	spin_unlock_irqrestore(&list->spinlock,flags);
920 
921 }	/* end of n_hdlc_buf_put() */
922 
923 /**
924  * n_hdlc_buf_get - remove and return an HDLC buffer from list
925  * @list - pointer to HDLC buffer list
926  *
927  * Remove and return an HDLC buffer from the head of the specified HDLC buffer
928  * list.
929  * Returns a pointer to HDLC buffer if available, otherwise %NULL.
930  */
931 static struct n_hdlc_buf* n_hdlc_buf_get(struct n_hdlc_buf_list *list)
932 {
933 	unsigned long flags;
934 	struct n_hdlc_buf *buf;
935 	spin_lock_irqsave(&list->spinlock,flags);
936 
937 	buf = list->head;
938 	if (buf) {
939 		list->head = buf->link;
940 		(list->count)--;
941 	}
942 	if (!list->head)
943 		list->tail = NULL;
944 
945 	spin_unlock_irqrestore(&list->spinlock,flags);
946 	return buf;
947 
948 }	/* end of n_hdlc_buf_get() */
949 
950 static char hdlc_banner[] __initdata =
951 	KERN_INFO "HDLC line discipline maxframe=%u\n";
952 static char hdlc_register_ok[] __initdata =
953 	KERN_INFO "N_HDLC line discipline registered.\n";
954 static char hdlc_register_fail[] __initdata =
955 	KERN_ERR "error registering line discipline: %d\n";
956 static char hdlc_init_fail[] __initdata =
957 	KERN_INFO "N_HDLC: init failure %d\n";
958 
959 static int __init n_hdlc_init(void)
960 {
961 	int status;
962 
963 	/* range check maxframe arg */
964 	if (maxframe < 4096)
965 		maxframe = 4096;
966 	else if (maxframe > 65535)
967 		maxframe = 65535;
968 
969 	printk(hdlc_banner, maxframe);
970 
971 	status = tty_register_ldisc(N_HDLC, &n_hdlc_ldisc);
972 	if (!status)
973 		printk(hdlc_register_ok);
974 	else
975 		printk(hdlc_register_fail, status);
976 
977 	if (status)
978 		printk(hdlc_init_fail, status);
979 	return status;
980 
981 }	/* end of init_module() */
982 
983 static char hdlc_unregister_ok[] __exitdata =
984 	KERN_INFO "N_HDLC: line discipline unregistered\n";
985 static char hdlc_unregister_fail[] __exitdata =
986 	KERN_ERR "N_HDLC: can't unregister line discipline (err = %d)\n";
987 
988 static void __exit n_hdlc_exit(void)
989 {
990 	/* Release tty registration of line discipline */
991 	int status = tty_unregister_ldisc(N_HDLC);
992 
993 	if (status)
994 		printk(hdlc_unregister_fail, status);
995 	else
996 		printk(hdlc_unregister_ok);
997 }
998 
999 module_init(n_hdlc_init);
1000 module_exit(n_hdlc_exit);
1001 
1002 MODULE_LICENSE("GPL");
1003 MODULE_AUTHOR("Paul Fulghum paulkf@microgate.com");
1004 module_param(debuglevel, int, 0);
1005 module_param(maxframe, int, 0);
1006 MODULE_ALIAS_LDISC(N_HDLC);
1007