xref: /openbmc/linux/drivers/tty/n_hdlc.c (revision 6d99a79c)
1 // SPDX-License-Identifier: GPL-1.0+
2 /* generic HDLC line discipline for Linux
3  *
4  * Written by Paul Fulghum paulkf@microgate.com
5  * for Microgate Corporation
6  *
7  * Microgate and SyncLink are registered trademarks of Microgate Corporation
8  *
9  * Adapted from ppp.c, written by Michael Callahan <callahan@maths.ox.ac.uk>,
10  *	Al Longyear <longyear@netcom.com>,
11  *	Paul Mackerras <Paul.Mackerras@cs.anu.edu.au>
12  *
13  * Original release 01/11/99
14  *
15  * This module implements the tty line discipline N_HDLC for use with
16  * tty device drivers that support bit-synchronous HDLC communications.
17  *
18  * All HDLC data is frame oriented which means:
19  *
20  * 1. tty write calls represent one complete transmit frame of data
21  *    The device driver should accept the complete frame or none of
22  *    the frame (busy) in the write method. Each write call should have
23  *    a byte count in the range of 2-65535 bytes (2 is min HDLC frame
24  *    with 1 addr byte and 1 ctrl byte). The max byte count of 65535
25  *    should include any crc bytes required. For example, when using
26  *    CCITT CRC32, 4 crc bytes are required, so the maximum size frame
27  *    the application may transmit is limited to 65531 bytes. For CCITT
28  *    CRC16, the maximum application frame size would be 65533.
29  *
30  *
31  * 2. receive callbacks from the device driver represents
32  *    one received frame. The device driver should bypass
33  *    the tty flip buffer and call the line discipline receive
34  *    callback directly to avoid fragmenting or concatenating
35  *    multiple frames into a single receive callback.
36  *
37  *    The HDLC line discipline queues the receive frames in separate
38  *    buffers so complete receive frames can be returned by the
39  *    tty read calls.
40  *
41  * 3. tty read calls returns an entire frame of data or nothing.
42  *
43  * 4. all send and receive data is considered raw. No processing
44  *    or translation is performed by the line discipline, regardless
45  *    of the tty flags
46  *
47  * 5. When line discipline is queried for the amount of receive
48  *    data available (FIOC), 0 is returned if no data available,
49  *    otherwise the count of the next available frame is returned.
50  *    (instead of the sum of all received frame counts).
51  *
52  * These conventions allow the standard tty programming interface
53  * to be used for synchronous HDLC applications when used with
54  * this line discipline (or another line discipline that is frame
55  * oriented such as N_PPP).
56  *
57  * The SyncLink driver (synclink.c) implements both asynchronous
58  * (using standard line discipline N_TTY) and synchronous HDLC
59  * (using N_HDLC) communications, with the latter using the above
60  * conventions.
61  *
62  * This implementation is very basic and does not maintain
63  * any statistics. The main point is to enforce the raw data
64  * and frame orientation of HDLC communications.
65  *
66  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
67  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
68  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
69  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
70  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
71  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
72  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
73  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
74  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
75  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
76  * OF THE POSSIBILITY OF SUCH DAMAGE.
77  */
78 
79 #define HDLC_MAGIC 0x239e
80 
81 #include <linux/module.h>
82 #include <linux/init.h>
83 #include <linux/kernel.h>
84 #include <linux/sched.h>
85 #include <linux/types.h>
86 #include <linux/fcntl.h>
87 #include <linux/interrupt.h>
88 #include <linux/ptrace.h>
89 
90 #undef VERSION
91 #define VERSION(major,minor,patch) (((((major)<<8)+(minor))<<8)+(patch))
92 
93 #include <linux/poll.h>
94 #include <linux/in.h>
95 #include <linux/ioctl.h>
96 #include <linux/slab.h>
97 #include <linux/tty.h>
98 #include <linux/errno.h>
99 #include <linux/string.h>	/* used in new tty drivers */
100 #include <linux/signal.h>	/* used in new tty drivers */
101 #include <linux/if.h>
102 #include <linux/bitops.h>
103 
104 #include <asm/termios.h>
105 #include <linux/uaccess.h>
106 
107 /*
108  * Buffers for individual HDLC frames
109  */
110 #define MAX_HDLC_FRAME_SIZE 65535
111 #define DEFAULT_RX_BUF_COUNT 10
112 #define MAX_RX_BUF_COUNT 60
113 #define DEFAULT_TX_BUF_COUNT 3
114 
115 struct n_hdlc_buf {
116 	struct list_head  list_item;
117 	int		  count;
118 	char		  buf[1];
119 };
120 
121 #define	N_HDLC_BUF_SIZE	(sizeof(struct n_hdlc_buf) + maxframe)
122 
123 struct n_hdlc_buf_list {
124 	struct list_head  list;
125 	int		  count;
126 	spinlock_t	  spinlock;
127 };
128 
129 /**
130  * struct n_hdlc - per device instance data structure
131  * @magic - magic value for structure
132  * @flags - miscellaneous control flags
133  * @tty - ptr to TTY structure
134  * @backup_tty - TTY to use if tty gets closed
135  * @tbusy - reentrancy flag for tx wakeup code
136  * @woke_up - FIXME: describe this field
137  * @tx_buf_list - list of pending transmit frame buffers
138  * @rx_buf_list - list of received frame buffers
139  * @tx_free_buf_list - list unused transmit frame buffers
140  * @rx_free_buf_list - list unused received frame buffers
141  */
142 struct n_hdlc {
143 	int			magic;
144 	__u32			flags;
145 	struct tty_struct	*tty;
146 	struct tty_struct	*backup_tty;
147 	int			tbusy;
148 	int			woke_up;
149 	struct n_hdlc_buf_list	tx_buf_list;
150 	struct n_hdlc_buf_list	rx_buf_list;
151 	struct n_hdlc_buf_list	tx_free_buf_list;
152 	struct n_hdlc_buf_list	rx_free_buf_list;
153 };
154 
155 /*
156  * HDLC buffer list manipulation functions
157  */
158 static void n_hdlc_buf_return(struct n_hdlc_buf_list *buf_list,
159 						struct n_hdlc_buf *buf);
160 static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
161 			   struct n_hdlc_buf *buf);
162 static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *list);
163 
164 /* Local functions */
165 
166 static struct n_hdlc *n_hdlc_alloc (void);
167 
168 /* debug level can be set by insmod for debugging purposes */
169 #define DEBUG_LEVEL_INFO	1
170 static int debuglevel;
171 
172 /* max frame size for memory allocations */
173 static int maxframe = 4096;
174 
175 /* TTY callbacks */
176 
177 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
178 			   __u8 __user *buf, size_t nr);
179 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
180 			    const unsigned char *buf, size_t nr);
181 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
182 			    unsigned int cmd, unsigned long arg);
183 static __poll_t n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
184 				    poll_table *wait);
185 static int n_hdlc_tty_open(struct tty_struct *tty);
186 static void n_hdlc_tty_close(struct tty_struct *tty);
187 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *cp,
188 			       char *fp, int count);
189 static void n_hdlc_tty_wakeup(struct tty_struct *tty);
190 
191 #define bset(p,b)	((p)[(b) >> 5] |= (1 << ((b) & 0x1f)))
192 
193 #define tty2n_hdlc(tty)	((struct n_hdlc *) ((tty)->disc_data))
194 #define n_hdlc2tty(n_hdlc)	((n_hdlc)->tty)
195 
196 static void flush_rx_queue(struct tty_struct *tty)
197 {
198 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
199 	struct n_hdlc_buf *buf;
200 
201 	while ((buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list)))
202 		n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, buf);
203 }
204 
205 static void flush_tx_queue(struct tty_struct *tty)
206 {
207 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
208 	struct n_hdlc_buf *buf;
209 
210 	while ((buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list)))
211 		n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, buf);
212 }
213 
214 static struct tty_ldisc_ops n_hdlc_ldisc = {
215 	.owner		= THIS_MODULE,
216 	.magic		= TTY_LDISC_MAGIC,
217 	.name		= "hdlc",
218 	.open		= n_hdlc_tty_open,
219 	.close		= n_hdlc_tty_close,
220 	.read		= n_hdlc_tty_read,
221 	.write		= n_hdlc_tty_write,
222 	.ioctl		= n_hdlc_tty_ioctl,
223 	.poll		= n_hdlc_tty_poll,
224 	.receive_buf	= n_hdlc_tty_receive,
225 	.write_wakeup	= n_hdlc_tty_wakeup,
226 	.flush_buffer   = flush_rx_queue,
227 };
228 
229 /**
230  * n_hdlc_release - release an n_hdlc per device line discipline info structure
231  * @n_hdlc - per device line discipline info structure
232  */
233 static void n_hdlc_release(struct n_hdlc *n_hdlc)
234 {
235 	struct tty_struct *tty = n_hdlc2tty (n_hdlc);
236 	struct n_hdlc_buf *buf;
237 
238 	if (debuglevel >= DEBUG_LEVEL_INFO)
239 		printk("%s(%d)n_hdlc_release() called\n",__FILE__,__LINE__);
240 
241 	/* Ensure that the n_hdlcd process is not hanging on select()/poll() */
242 	wake_up_interruptible (&tty->read_wait);
243 	wake_up_interruptible (&tty->write_wait);
244 
245 	if (tty->disc_data == n_hdlc)
246 		tty->disc_data = NULL;	/* Break the tty->n_hdlc link */
247 
248 	/* Release transmit and receive buffers */
249 	for(;;) {
250 		buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
251 		if (buf) {
252 			kfree(buf);
253 		} else
254 			break;
255 	}
256 	for(;;) {
257 		buf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list);
258 		if (buf) {
259 			kfree(buf);
260 		} else
261 			break;
262 	}
263 	for(;;) {
264 		buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
265 		if (buf) {
266 			kfree(buf);
267 		} else
268 			break;
269 	}
270 	for(;;) {
271 		buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
272 		if (buf) {
273 			kfree(buf);
274 		} else
275 			break;
276 	}
277 	kfree(n_hdlc);
278 
279 }	/* end of n_hdlc_release() */
280 
281 /**
282  * n_hdlc_tty_close - line discipline close
283  * @tty - pointer to tty info structure
284  *
285  * Called when the line discipline is changed to something
286  * else, the tty is closed, or the tty detects a hangup.
287  */
288 static void n_hdlc_tty_close(struct tty_struct *tty)
289 {
290 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
291 
292 	if (debuglevel >= DEBUG_LEVEL_INFO)
293 		printk("%s(%d)n_hdlc_tty_close() called\n",__FILE__,__LINE__);
294 
295 	if (n_hdlc != NULL) {
296 		if (n_hdlc->magic != HDLC_MAGIC) {
297 			printk (KERN_WARNING"n_hdlc: trying to close unopened tty!\n");
298 			return;
299 		}
300 #if defined(TTY_NO_WRITE_SPLIT)
301 		clear_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
302 #endif
303 		tty->disc_data = NULL;
304 		if (tty == n_hdlc->backup_tty)
305 			n_hdlc->backup_tty = NULL;
306 		if (tty != n_hdlc->tty)
307 			return;
308 		if (n_hdlc->backup_tty) {
309 			n_hdlc->tty = n_hdlc->backup_tty;
310 		} else {
311 			n_hdlc_release (n_hdlc);
312 		}
313 	}
314 
315 	if (debuglevel >= DEBUG_LEVEL_INFO)
316 		printk("%s(%d)n_hdlc_tty_close() success\n",__FILE__,__LINE__);
317 
318 }	/* end of n_hdlc_tty_close() */
319 
320 /**
321  * n_hdlc_tty_open - called when line discipline changed to n_hdlc
322  * @tty - pointer to tty info structure
323  *
324  * Returns 0 if success, otherwise error code
325  */
326 static int n_hdlc_tty_open (struct tty_struct *tty)
327 {
328 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
329 
330 	if (debuglevel >= DEBUG_LEVEL_INFO)
331 		printk("%s(%d)n_hdlc_tty_open() called (device=%s)\n",
332 		__FILE__,__LINE__,
333 		tty->name);
334 
335 	/* There should not be an existing table for this slot. */
336 	if (n_hdlc) {
337 		printk (KERN_ERR"n_hdlc_tty_open:tty already associated!\n" );
338 		return -EEXIST;
339 	}
340 
341 	n_hdlc = n_hdlc_alloc();
342 	if (!n_hdlc) {
343 		printk (KERN_ERR "n_hdlc_alloc failed\n");
344 		return -ENFILE;
345 	}
346 
347 	tty->disc_data = n_hdlc;
348 	n_hdlc->tty    = tty;
349 	tty->receive_room = 65536;
350 
351 #if defined(TTY_NO_WRITE_SPLIT)
352 	/* change tty_io write() to not split large writes into 8K chunks */
353 	set_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
354 #endif
355 
356 	/* flush receive data from driver */
357 	tty_driver_flush_buffer(tty);
358 
359 	if (debuglevel >= DEBUG_LEVEL_INFO)
360 		printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__,__LINE__);
361 
362 	return 0;
363 
364 }	/* end of n_tty_hdlc_open() */
365 
366 /**
367  * n_hdlc_send_frames - send frames on pending send buffer list
368  * @n_hdlc - pointer to ldisc instance data
369  * @tty - pointer to tty instance data
370  *
371  * Send frames on pending send buffer list until the driver does not accept a
372  * frame (busy) this function is called after adding a frame to the send buffer
373  * list and by the tty wakeup callback.
374  */
375 static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
376 {
377 	register int actual;
378 	unsigned long flags;
379 	struct n_hdlc_buf *tbuf;
380 
381 	if (debuglevel >= DEBUG_LEVEL_INFO)
382 		printk("%s(%d)n_hdlc_send_frames() called\n",__FILE__,__LINE__);
383  check_again:
384 
385  	spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
386 	if (n_hdlc->tbusy) {
387 		n_hdlc->woke_up = 1;
388  		spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
389 		return;
390 	}
391 	n_hdlc->tbusy = 1;
392 	n_hdlc->woke_up = 0;
393 	spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
394 
395 	tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
396 	while (tbuf) {
397 		if (debuglevel >= DEBUG_LEVEL_INFO)
398 			printk("%s(%d)sending frame %p, count=%d\n",
399 				__FILE__,__LINE__,tbuf,tbuf->count);
400 
401 		/* Send the next block of data to device */
402 		set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
403 		actual = tty->ops->write(tty, tbuf->buf, tbuf->count);
404 
405 		/* rollback was possible and has been done */
406 		if (actual == -ERESTARTSYS) {
407 			n_hdlc_buf_return(&n_hdlc->tx_buf_list, tbuf);
408 			break;
409 		}
410 		/* if transmit error, throw frame away by */
411 		/* pretending it was accepted by driver */
412 		if (actual < 0)
413 			actual = tbuf->count;
414 
415 		if (actual == tbuf->count) {
416 			if (debuglevel >= DEBUG_LEVEL_INFO)
417 				printk("%s(%d)frame %p completed\n",
418 					__FILE__,__LINE__,tbuf);
419 
420 			/* free current transmit buffer */
421 			n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, tbuf);
422 
423 			/* wait up sleeping writers */
424 			wake_up_interruptible(&tty->write_wait);
425 
426 			/* get next pending transmit buffer */
427 			tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
428 		} else {
429 			if (debuglevel >= DEBUG_LEVEL_INFO)
430 				printk("%s(%d)frame %p pending\n",
431 					__FILE__,__LINE__,tbuf);
432 
433 			/*
434 			 * the buffer was not accepted by driver,
435 			 * return it back into tx queue
436 			 */
437 			n_hdlc_buf_return(&n_hdlc->tx_buf_list, tbuf);
438 			break;
439 		}
440 	}
441 
442 	if (!tbuf)
443 		clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
444 
445 	/* Clear the re-entry flag */
446 	spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
447 	n_hdlc->tbusy = 0;
448 	spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
449 
450         if (n_hdlc->woke_up)
451 	  goto check_again;
452 
453 	if (debuglevel >= DEBUG_LEVEL_INFO)
454 		printk("%s(%d)n_hdlc_send_frames() exit\n",__FILE__,__LINE__);
455 
456 }	/* end of n_hdlc_send_frames() */
457 
458 /**
459  * n_hdlc_tty_wakeup - Callback for transmit wakeup
460  * @tty	- pointer to associated tty instance data
461  *
462  * Called when low level device driver can accept more send data.
463  */
464 static void n_hdlc_tty_wakeup(struct tty_struct *tty)
465 {
466 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
467 
468 	if (debuglevel >= DEBUG_LEVEL_INFO)
469 		printk("%s(%d)n_hdlc_tty_wakeup() called\n",__FILE__,__LINE__);
470 
471 	if (!n_hdlc)
472 		return;
473 
474 	if (tty != n_hdlc->tty) {
475 		clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
476 		return;
477 	}
478 
479 	n_hdlc_send_frames (n_hdlc, tty);
480 
481 }	/* end of n_hdlc_tty_wakeup() */
482 
483 /**
484  * n_hdlc_tty_receive - Called by tty driver when receive data is available
485  * @tty	- pointer to tty instance data
486  * @data - pointer to received data
487  * @flags - pointer to flags for data
488  * @count - count of received data in bytes
489  *
490  * Called by tty low level driver when receive data is available. Data is
491  * interpreted as one HDLC frame.
492  */
493 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data,
494 			       char *flags, int count)
495 {
496 	register struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
497 	register struct n_hdlc_buf *buf;
498 
499 	if (debuglevel >= DEBUG_LEVEL_INFO)
500 		printk("%s(%d)n_hdlc_tty_receive() called count=%d\n",
501 			__FILE__,__LINE__, count);
502 
503 	/* This can happen if stuff comes in on the backup tty */
504 	if (!n_hdlc || tty != n_hdlc->tty)
505 		return;
506 
507 	/* verify line is using HDLC discipline */
508 	if (n_hdlc->magic != HDLC_MAGIC) {
509 		printk("%s(%d) line not using HDLC discipline\n",
510 			__FILE__,__LINE__);
511 		return;
512 	}
513 
514 	if ( count>maxframe ) {
515 		if (debuglevel >= DEBUG_LEVEL_INFO)
516 			printk("%s(%d) rx count>maxframesize, data discarded\n",
517 			       __FILE__,__LINE__);
518 		return;
519 	}
520 
521 	/* get a free HDLC buffer */
522 	buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
523 	if (!buf) {
524 		/* no buffers in free list, attempt to allocate another rx buffer */
525 		/* unless the maximum count has been reached */
526 		if (n_hdlc->rx_buf_list.count < MAX_RX_BUF_COUNT)
527 			buf = kmalloc(N_HDLC_BUF_SIZE, GFP_ATOMIC);
528 	}
529 
530 	if (!buf) {
531 		if (debuglevel >= DEBUG_LEVEL_INFO)
532 			printk("%s(%d) no more rx buffers, data discarded\n",
533 			       __FILE__,__LINE__);
534 		return;
535 	}
536 
537 	/* copy received data to HDLC buffer */
538 	memcpy(buf->buf,data,count);
539 	buf->count=count;
540 
541 	/* add HDLC buffer to list of received frames */
542 	n_hdlc_buf_put(&n_hdlc->rx_buf_list, buf);
543 
544 	/* wake up any blocked reads and perform async signalling */
545 	wake_up_interruptible (&tty->read_wait);
546 	if (n_hdlc->tty->fasync != NULL)
547 		kill_fasync (&n_hdlc->tty->fasync, SIGIO, POLL_IN);
548 
549 }	/* end of n_hdlc_tty_receive() */
550 
551 /**
552  * n_hdlc_tty_read - Called to retrieve one frame of data (if available)
553  * @tty - pointer to tty instance data
554  * @file - pointer to open file object
555  * @buf - pointer to returned data buffer
556  * @nr - size of returned data buffer
557  *
558  * Returns the number of bytes returned or error code.
559  */
560 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
561 			   __u8 __user *buf, size_t nr)
562 {
563 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
564 	int ret = 0;
565 	struct n_hdlc_buf *rbuf;
566 	DECLARE_WAITQUEUE(wait, current);
567 
568 	if (debuglevel >= DEBUG_LEVEL_INFO)
569 		printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__);
570 
571 	/* Validate the pointers */
572 	if (!n_hdlc)
573 		return -EIO;
574 
575 	/* verify user access to buffer */
576 	if (!access_ok(VERIFY_WRITE, buf, nr)) {
577 		printk(KERN_WARNING "%s(%d) n_hdlc_tty_read() can't verify user "
578 		"buffer\n", __FILE__, __LINE__);
579 		return -EFAULT;
580 	}
581 
582 	add_wait_queue(&tty->read_wait, &wait);
583 
584 	for (;;) {
585 		if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
586 			ret = -EIO;
587 			break;
588 		}
589 		if (tty_hung_up_p(file))
590 			break;
591 
592 		set_current_state(TASK_INTERRUPTIBLE);
593 
594 		rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
595 		if (rbuf) {
596 			if (rbuf->count > nr) {
597 				/* too large for caller's buffer */
598 				ret = -EOVERFLOW;
599 			} else {
600 				if (copy_to_user(buf, rbuf->buf, rbuf->count))
601 					ret = -EFAULT;
602 				else
603 					ret = rbuf->count;
604 			}
605 
606 			if (n_hdlc->rx_free_buf_list.count >
607 			    DEFAULT_RX_BUF_COUNT)
608 				kfree(rbuf);
609 			else
610 				n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, rbuf);
611 			break;
612 		}
613 
614 		/* no data */
615 		if (file->f_flags & O_NONBLOCK) {
616 			ret = -EAGAIN;
617 			break;
618 		}
619 
620 		schedule();
621 
622 		if (signal_pending(current)) {
623 			ret = -EINTR;
624 			break;
625 		}
626 	}
627 
628 	remove_wait_queue(&tty->read_wait, &wait);
629 	__set_current_state(TASK_RUNNING);
630 
631 	return ret;
632 
633 }	/* end of n_hdlc_tty_read() */
634 
635 /**
636  * n_hdlc_tty_write - write a single frame of data to device
637  * @tty	- pointer to associated tty device instance data
638  * @file - pointer to file object data
639  * @data - pointer to transmit data (one frame)
640  * @count - size of transmit frame in bytes
641  *
642  * Returns the number of bytes written (or error code).
643  */
644 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
645 			    const unsigned char *data, size_t count)
646 {
647 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
648 	int error = 0;
649 	DECLARE_WAITQUEUE(wait, current);
650 	struct n_hdlc_buf *tbuf;
651 
652 	if (debuglevel >= DEBUG_LEVEL_INFO)
653 		printk("%s(%d)n_hdlc_tty_write() called count=%zd\n",
654 			__FILE__,__LINE__,count);
655 
656 	/* Verify pointers */
657 	if (!n_hdlc)
658 		return -EIO;
659 
660 	if (n_hdlc->magic != HDLC_MAGIC)
661 		return -EIO;
662 
663 	/* verify frame size */
664 	if (count > maxframe ) {
665 		if (debuglevel & DEBUG_LEVEL_INFO)
666 			printk (KERN_WARNING
667 				"n_hdlc_tty_write: truncating user packet "
668 				"from %lu to %d\n", (unsigned long) count,
669 				maxframe );
670 		count = maxframe;
671 	}
672 
673 	add_wait_queue(&tty->write_wait, &wait);
674 
675 	for (;;) {
676 		set_current_state(TASK_INTERRUPTIBLE);
677 
678 		tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list);
679 		if (tbuf)
680 			break;
681 
682 		if (file->f_flags & O_NONBLOCK) {
683 			error = -EAGAIN;
684 			break;
685 		}
686 		schedule();
687 
688 		n_hdlc = tty2n_hdlc (tty);
689 		if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC ||
690 		    tty != n_hdlc->tty) {
691 			printk("n_hdlc_tty_write: %p invalid after wait!\n", n_hdlc);
692 			error = -EIO;
693 			break;
694 		}
695 
696 		if (signal_pending(current)) {
697 			error = -EINTR;
698 			break;
699 		}
700 	}
701 
702 	__set_current_state(TASK_RUNNING);
703 	remove_wait_queue(&tty->write_wait, &wait);
704 
705 	if (!error) {
706 		/* Retrieve the user's buffer */
707 		memcpy(tbuf->buf, data, count);
708 
709 		/* Send the data */
710 		tbuf->count = error = count;
711 		n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf);
712 		n_hdlc_send_frames(n_hdlc,tty);
713 	}
714 
715 	return error;
716 
717 }	/* end of n_hdlc_tty_write() */
718 
719 /**
720  * n_hdlc_tty_ioctl - process IOCTL system call for the tty device.
721  * @tty - pointer to tty instance data
722  * @file - pointer to open file object for device
723  * @cmd - IOCTL command code
724  * @arg - argument for IOCTL call (cmd dependent)
725  *
726  * Returns command dependent result.
727  */
728 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
729 			    unsigned int cmd, unsigned long arg)
730 {
731 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
732 	int error = 0;
733 	int count;
734 	unsigned long flags;
735 	struct n_hdlc_buf *buf = NULL;
736 
737 	if (debuglevel >= DEBUG_LEVEL_INFO)
738 		printk("%s(%d)n_hdlc_tty_ioctl() called %d\n",
739 			__FILE__,__LINE__,cmd);
740 
741 	/* Verify the status of the device */
742 	if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC)
743 		return -EBADF;
744 
745 	switch (cmd) {
746 	case FIONREAD:
747 		/* report count of read data available */
748 		/* in next available frame (if any) */
749 		spin_lock_irqsave(&n_hdlc->rx_buf_list.spinlock,flags);
750 		buf = list_first_entry_or_null(&n_hdlc->rx_buf_list.list,
751 						struct n_hdlc_buf, list_item);
752 		if (buf)
753 			count = buf->count;
754 		else
755 			count = 0;
756 		spin_unlock_irqrestore(&n_hdlc->rx_buf_list.spinlock,flags);
757 		error = put_user(count, (int __user *)arg);
758 		break;
759 
760 	case TIOCOUTQ:
761 		/* get the pending tx byte count in the driver */
762 		count = tty_chars_in_buffer(tty);
763 		/* add size of next output frame in queue */
764 		spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock,flags);
765 		buf = list_first_entry_or_null(&n_hdlc->tx_buf_list.list,
766 						struct n_hdlc_buf, list_item);
767 		if (buf)
768 			count += buf->count;
769 		spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock,flags);
770 		error = put_user(count, (int __user *)arg);
771 		break;
772 
773 	case TCFLSH:
774 		switch (arg) {
775 		case TCIOFLUSH:
776 		case TCOFLUSH:
777 			flush_tx_queue(tty);
778 		}
779 		/* fall through to default */
780 
781 	default:
782 		error = n_tty_ioctl_helper(tty, file, cmd, arg);
783 		break;
784 	}
785 	return error;
786 
787 }	/* end of n_hdlc_tty_ioctl() */
788 
789 /**
790  * n_hdlc_tty_poll - TTY callback for poll system call
791  * @tty - pointer to tty instance data
792  * @filp - pointer to open file object for device
793  * @poll_table - wait queue for operations
794  *
795  * Determine which operations (read/write) will not block and return info
796  * to caller.
797  * Returns a bit mask containing info on which ops will not block.
798  */
799 static __poll_t n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
800 				    poll_table *wait)
801 {
802 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
803 	__poll_t mask = 0;
804 
805 	if (debuglevel >= DEBUG_LEVEL_INFO)
806 		printk("%s(%d)n_hdlc_tty_poll() called\n",__FILE__,__LINE__);
807 
808 	if (n_hdlc && n_hdlc->magic == HDLC_MAGIC && tty == n_hdlc->tty) {
809 		/* queue current process into any wait queue that */
810 		/* may awaken in the future (read and write) */
811 
812 		poll_wait(filp, &tty->read_wait, wait);
813 		poll_wait(filp, &tty->write_wait, wait);
814 
815 		/* set bits for operations that won't block */
816 		if (!list_empty(&n_hdlc->rx_buf_list.list))
817 			mask |= EPOLLIN | EPOLLRDNORM;	/* readable */
818 		if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
819 			mask |= EPOLLHUP;
820 		if (tty_hung_up_p(filp))
821 			mask |= EPOLLHUP;
822 		if (!tty_is_writelocked(tty) &&
823 				!list_empty(&n_hdlc->tx_free_buf_list.list))
824 			mask |= EPOLLOUT | EPOLLWRNORM;	/* writable */
825 	}
826 	return mask;
827 }	/* end of n_hdlc_tty_poll() */
828 
829 /**
830  * n_hdlc_alloc - allocate an n_hdlc instance data structure
831  *
832  * Returns a pointer to newly created structure if success, otherwise %NULL
833  */
834 static struct n_hdlc *n_hdlc_alloc(void)
835 {
836 	struct n_hdlc_buf *buf;
837 	int i;
838 	struct n_hdlc *n_hdlc = kzalloc(sizeof(*n_hdlc), GFP_KERNEL);
839 
840 	if (!n_hdlc)
841 		return NULL;
842 
843 	spin_lock_init(&n_hdlc->rx_free_buf_list.spinlock);
844 	spin_lock_init(&n_hdlc->tx_free_buf_list.spinlock);
845 	spin_lock_init(&n_hdlc->rx_buf_list.spinlock);
846 	spin_lock_init(&n_hdlc->tx_buf_list.spinlock);
847 
848 	INIT_LIST_HEAD(&n_hdlc->rx_free_buf_list.list);
849 	INIT_LIST_HEAD(&n_hdlc->tx_free_buf_list.list);
850 	INIT_LIST_HEAD(&n_hdlc->rx_buf_list.list);
851 	INIT_LIST_HEAD(&n_hdlc->tx_buf_list.list);
852 
853 	/* allocate free rx buffer list */
854 	for(i=0;i<DEFAULT_RX_BUF_COUNT;i++) {
855 		buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
856 		if (buf)
857 			n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,buf);
858 		else if (debuglevel >= DEBUG_LEVEL_INFO)
859 			printk("%s(%d)n_hdlc_alloc(), kalloc() failed for rx buffer %d\n",__FILE__,__LINE__, i);
860 	}
861 
862 	/* allocate free tx buffer list */
863 	for(i=0;i<DEFAULT_TX_BUF_COUNT;i++) {
864 		buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
865 		if (buf)
866 			n_hdlc_buf_put(&n_hdlc->tx_free_buf_list,buf);
867 		else if (debuglevel >= DEBUG_LEVEL_INFO)
868 			printk("%s(%d)n_hdlc_alloc(), kalloc() failed for tx buffer %d\n",__FILE__,__LINE__, i);
869 	}
870 
871 	/* Initialize the control block */
872 	n_hdlc->magic  = HDLC_MAGIC;
873 	n_hdlc->flags  = 0;
874 
875 	return n_hdlc;
876 
877 }	/* end of n_hdlc_alloc() */
878 
879 /**
880  * n_hdlc_buf_return - put the HDLC buffer after the head of the specified list
881  * @buf_list - pointer to the buffer list
882  * @buf - pointer to the buffer
883  */
884 static void n_hdlc_buf_return(struct n_hdlc_buf_list *buf_list,
885 						struct n_hdlc_buf *buf)
886 {
887 	unsigned long flags;
888 
889 	spin_lock_irqsave(&buf_list->spinlock, flags);
890 
891 	list_add(&buf->list_item, &buf_list->list);
892 	buf_list->count++;
893 
894 	spin_unlock_irqrestore(&buf_list->spinlock, flags);
895 }
896 
897 /**
898  * n_hdlc_buf_put - add specified HDLC buffer to tail of specified list
899  * @buf_list - pointer to buffer list
900  * @buf	- pointer to buffer
901  */
902 static void n_hdlc_buf_put(struct n_hdlc_buf_list *buf_list,
903 			   struct n_hdlc_buf *buf)
904 {
905 	unsigned long flags;
906 
907 	spin_lock_irqsave(&buf_list->spinlock, flags);
908 
909 	list_add_tail(&buf->list_item, &buf_list->list);
910 	buf_list->count++;
911 
912 	spin_unlock_irqrestore(&buf_list->spinlock, flags);
913 }	/* end of n_hdlc_buf_put() */
914 
915 /**
916  * n_hdlc_buf_get - remove and return an HDLC buffer from list
917  * @buf_list - pointer to HDLC buffer list
918  *
919  * Remove and return an HDLC buffer from the head of the specified HDLC buffer
920  * list.
921  * Returns a pointer to HDLC buffer if available, otherwise %NULL.
922  */
923 static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *buf_list)
924 {
925 	unsigned long flags;
926 	struct n_hdlc_buf *buf;
927 
928 	spin_lock_irqsave(&buf_list->spinlock, flags);
929 
930 	buf = list_first_entry_or_null(&buf_list->list,
931 						struct n_hdlc_buf, list_item);
932 	if (buf) {
933 		list_del(&buf->list_item);
934 		buf_list->count--;
935 	}
936 
937 	spin_unlock_irqrestore(&buf_list->spinlock, flags);
938 	return buf;
939 }	/* end of n_hdlc_buf_get() */
940 
941 static const char hdlc_banner[] __initconst =
942 	KERN_INFO "HDLC line discipline maxframe=%u\n";
943 static const char hdlc_register_ok[] __initconst =
944 	KERN_INFO "N_HDLC line discipline registered.\n";
945 static const char hdlc_register_fail[] __initconst =
946 	KERN_ERR "error registering line discipline: %d\n";
947 
948 static int __init n_hdlc_init(void)
949 {
950 	int status;
951 
952 	/* range check maxframe arg */
953 	if (maxframe < 4096)
954 		maxframe = 4096;
955 	else if (maxframe > 65535)
956 		maxframe = 65535;
957 
958 	printk(hdlc_banner, maxframe);
959 
960 	status = tty_register_ldisc(N_HDLC, &n_hdlc_ldisc);
961 	if (!status)
962 		printk(hdlc_register_ok);
963 	else
964 		printk(hdlc_register_fail, status);
965 
966 	return status;
967 
968 }	/* end of init_module() */
969 
970 static const char hdlc_unregister_ok[] __exitdata =
971 	KERN_INFO "N_HDLC: line discipline unregistered\n";
972 static const char hdlc_unregister_fail[] __exitdata =
973 	KERN_ERR "N_HDLC: can't unregister line discipline (err = %d)\n";
974 
975 static void __exit n_hdlc_exit(void)
976 {
977 	/* Release tty registration of line discipline */
978 	int status = tty_unregister_ldisc(N_HDLC);
979 
980 	if (status)
981 		printk(hdlc_unregister_fail, status);
982 	else
983 		printk(hdlc_unregister_ok);
984 }
985 
986 module_init(n_hdlc_init);
987 module_exit(n_hdlc_exit);
988 
989 MODULE_LICENSE("GPL");
990 MODULE_AUTHOR("Paul Fulghum paulkf@microgate.com");
991 module_param(debuglevel, int, 0);
992 module_param(maxframe, int, 0);
993 MODULE_ALIAS_LDISC(N_HDLC);
994