xref: /openbmc/linux/drivers/tty/n_hdlc.c (revision 5d0e4d78)
1 /* generic HDLC line discipline for Linux
2  *
3  * Written by Paul Fulghum paulkf@microgate.com
4  * for Microgate Corporation
5  *
6  * Microgate and SyncLink are registered trademarks of Microgate Corporation
7  *
8  * Adapted from ppp.c, written by Michael Callahan <callahan@maths.ox.ac.uk>,
9  *	Al Longyear <longyear@netcom.com>,
10  *	Paul Mackerras <Paul.Mackerras@cs.anu.edu.au>
11  *
12  * Original release 01/11/99
13  *
14  * This code is released under the GNU General Public License (GPL)
15  *
16  * This module implements the tty line discipline N_HDLC for use with
17  * tty device drivers that support bit-synchronous HDLC communications.
18  *
19  * All HDLC data is frame oriented which means:
20  *
21  * 1. tty write calls represent one complete transmit frame of data
22  *    The device driver should accept the complete frame or none of
23  *    the frame (busy) in the write method. Each write call should have
24  *    a byte count in the range of 2-65535 bytes (2 is min HDLC frame
25  *    with 1 addr byte and 1 ctrl byte). The max byte count of 65535
26  *    should include any crc bytes required. For example, when using
27  *    CCITT CRC32, 4 crc bytes are required, so the maximum size frame
28  *    the application may transmit is limited to 65531 bytes. For CCITT
29  *    CRC16, the maximum application frame size would be 65533.
30  *
31  *
32  * 2. receive callbacks from the device driver represents
33  *    one received frame. The device driver should bypass
34  *    the tty flip buffer and call the line discipline receive
35  *    callback directly to avoid fragmenting or concatenating
36  *    multiple frames into a single receive callback.
37  *
38  *    The HDLC line discipline queues the receive frames in separate
39  *    buffers so complete receive frames can be returned by the
40  *    tty read calls.
41  *
42  * 3. tty read calls returns an entire frame of data or nothing.
43  *
44  * 4. all send and receive data is considered raw. No processing
45  *    or translation is performed by the line discipline, regardless
46  *    of the tty flags
47  *
48  * 5. When line discipline is queried for the amount of receive
49  *    data available (FIOC), 0 is returned if no data available,
50  *    otherwise the count of the next available frame is returned.
51  *    (instead of the sum of all received frame counts).
52  *
53  * These conventions allow the standard tty programming interface
54  * to be used for synchronous HDLC applications when used with
55  * this line discipline (or another line discipline that is frame
56  * oriented such as N_PPP).
57  *
58  * The SyncLink driver (synclink.c) implements both asynchronous
59  * (using standard line discipline N_TTY) and synchronous HDLC
60  * (using N_HDLC) communications, with the latter using the above
61  * conventions.
62  *
63  * This implementation is very basic and does not maintain
64  * any statistics. The main point is to enforce the raw data
65  * and frame orientation of HDLC communications.
66  *
67  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
68  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
69  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
70  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
71  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
72  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
73  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
74  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
75  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
76  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
77  * OF THE POSSIBILITY OF SUCH DAMAGE.
78  */
79 
80 #define HDLC_MAGIC 0x239e
81 
82 #include <linux/module.h>
83 #include <linux/init.h>
84 #include <linux/kernel.h>
85 #include <linux/sched.h>
86 #include <linux/types.h>
87 #include <linux/fcntl.h>
88 #include <linux/interrupt.h>
89 #include <linux/ptrace.h>
90 
91 #undef VERSION
92 #define VERSION(major,minor,patch) (((((major)<<8)+(minor))<<8)+(patch))
93 
94 #include <linux/poll.h>
95 #include <linux/in.h>
96 #include <linux/ioctl.h>
97 #include <linux/slab.h>
98 #include <linux/tty.h>
99 #include <linux/errno.h>
100 #include <linux/string.h>	/* used in new tty drivers */
101 #include <linux/signal.h>	/* used in new tty drivers */
102 #include <linux/if.h>
103 #include <linux/bitops.h>
104 
105 #include <asm/termios.h>
106 #include <linux/uaccess.h>
107 
108 /*
109  * Buffers for individual HDLC frames
110  */
111 #define MAX_HDLC_FRAME_SIZE 65535
112 #define DEFAULT_RX_BUF_COUNT 10
113 #define MAX_RX_BUF_COUNT 60
114 #define DEFAULT_TX_BUF_COUNT 3
115 
116 struct n_hdlc_buf {
117 	struct list_head  list_item;
118 	int		  count;
119 	char		  buf[1];
120 };
121 
122 #define	N_HDLC_BUF_SIZE	(sizeof(struct n_hdlc_buf) + maxframe)
123 
124 struct n_hdlc_buf_list {
125 	struct list_head  list;
126 	int		  count;
127 	spinlock_t	  spinlock;
128 };
129 
130 /**
131  * struct n_hdlc - per device instance data structure
132  * @magic - magic value for structure
133  * @flags - miscellaneous control flags
134  * @tty - ptr to TTY structure
135  * @backup_tty - TTY to use if tty gets closed
136  * @tbusy - reentrancy flag for tx wakeup code
137  * @woke_up - FIXME: describe this field
138  * @tx_buf_list - list of pending transmit frame buffers
139  * @rx_buf_list - list of received frame buffers
140  * @tx_free_buf_list - list unused transmit frame buffers
141  * @rx_free_buf_list - list unused received frame buffers
142  */
143 struct n_hdlc {
144 	int			magic;
145 	__u32			flags;
146 	struct tty_struct	*tty;
147 	struct tty_struct	*backup_tty;
148 	int			tbusy;
149 	int			woke_up;
150 	struct n_hdlc_buf_list	tx_buf_list;
151 	struct n_hdlc_buf_list	rx_buf_list;
152 	struct n_hdlc_buf_list	tx_free_buf_list;
153 	struct n_hdlc_buf_list	rx_free_buf_list;
154 };
155 
156 /*
157  * HDLC buffer list manipulation functions
158  */
159 static void n_hdlc_buf_return(struct n_hdlc_buf_list *buf_list,
160 						struct n_hdlc_buf *buf);
161 static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
162 			   struct n_hdlc_buf *buf);
163 static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *list);
164 
165 /* Local functions */
166 
167 static struct n_hdlc *n_hdlc_alloc (void);
168 
169 /* debug level can be set by insmod for debugging purposes */
170 #define DEBUG_LEVEL_INFO	1
171 static int debuglevel;
172 
173 /* max frame size for memory allocations */
174 static int maxframe = 4096;
175 
176 /* TTY callbacks */
177 
178 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
179 			   __u8 __user *buf, size_t nr);
180 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
181 			    const unsigned char *buf, size_t nr);
182 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
183 			    unsigned int cmd, unsigned long arg);
184 static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
185 				    poll_table *wait);
186 static int n_hdlc_tty_open(struct tty_struct *tty);
187 static void n_hdlc_tty_close(struct tty_struct *tty);
188 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *cp,
189 			       char *fp, int count);
190 static void n_hdlc_tty_wakeup(struct tty_struct *tty);
191 
192 #define bset(p,b)	((p)[(b) >> 5] |= (1 << ((b) & 0x1f)))
193 
194 #define tty2n_hdlc(tty)	((struct n_hdlc *) ((tty)->disc_data))
195 #define n_hdlc2tty(n_hdlc)	((n_hdlc)->tty)
196 
197 static void flush_rx_queue(struct tty_struct *tty)
198 {
199 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
200 	struct n_hdlc_buf *buf;
201 
202 	while ((buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list)))
203 		n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, buf);
204 }
205 
206 static void flush_tx_queue(struct tty_struct *tty)
207 {
208 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
209 	struct n_hdlc_buf *buf;
210 
211 	while ((buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list)))
212 		n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, buf);
213 }
214 
215 static struct tty_ldisc_ops n_hdlc_ldisc = {
216 	.owner		= THIS_MODULE,
217 	.magic		= TTY_LDISC_MAGIC,
218 	.name		= "hdlc",
219 	.open		= n_hdlc_tty_open,
220 	.close		= n_hdlc_tty_close,
221 	.read		= n_hdlc_tty_read,
222 	.write		= n_hdlc_tty_write,
223 	.ioctl		= n_hdlc_tty_ioctl,
224 	.poll		= n_hdlc_tty_poll,
225 	.receive_buf	= n_hdlc_tty_receive,
226 	.write_wakeup	= n_hdlc_tty_wakeup,
227 	.flush_buffer   = flush_rx_queue,
228 };
229 
230 /**
231  * n_hdlc_release - release an n_hdlc per device line discipline info structure
232  * @n_hdlc - per device line discipline info structure
233  */
234 static void n_hdlc_release(struct n_hdlc *n_hdlc)
235 {
236 	struct tty_struct *tty = n_hdlc2tty (n_hdlc);
237 	struct n_hdlc_buf *buf;
238 
239 	if (debuglevel >= DEBUG_LEVEL_INFO)
240 		printk("%s(%d)n_hdlc_release() called\n",__FILE__,__LINE__);
241 
242 	/* Ensure that the n_hdlcd process is not hanging on select()/poll() */
243 	wake_up_interruptible (&tty->read_wait);
244 	wake_up_interruptible (&tty->write_wait);
245 
246 	if (tty->disc_data == n_hdlc)
247 		tty->disc_data = NULL;	/* Break the tty->n_hdlc link */
248 
249 	/* Release transmit and receive buffers */
250 	for(;;) {
251 		buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
252 		if (buf) {
253 			kfree(buf);
254 		} else
255 			break;
256 	}
257 	for(;;) {
258 		buf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list);
259 		if (buf) {
260 			kfree(buf);
261 		} else
262 			break;
263 	}
264 	for(;;) {
265 		buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
266 		if (buf) {
267 			kfree(buf);
268 		} else
269 			break;
270 	}
271 	for(;;) {
272 		buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
273 		if (buf) {
274 			kfree(buf);
275 		} else
276 			break;
277 	}
278 	kfree(n_hdlc);
279 
280 }	/* end of n_hdlc_release() */
281 
282 /**
283  * n_hdlc_tty_close - line discipline close
284  * @tty - pointer to tty info structure
285  *
286  * Called when the line discipline is changed to something
287  * else, the tty is closed, or the tty detects a hangup.
288  */
289 static void n_hdlc_tty_close(struct tty_struct *tty)
290 {
291 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
292 
293 	if (debuglevel >= DEBUG_LEVEL_INFO)
294 		printk("%s(%d)n_hdlc_tty_close() called\n",__FILE__,__LINE__);
295 
296 	if (n_hdlc != NULL) {
297 		if (n_hdlc->magic != HDLC_MAGIC) {
298 			printk (KERN_WARNING"n_hdlc: trying to close unopened tty!\n");
299 			return;
300 		}
301 #if defined(TTY_NO_WRITE_SPLIT)
302 		clear_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
303 #endif
304 		tty->disc_data = NULL;
305 		if (tty == n_hdlc->backup_tty)
306 			n_hdlc->backup_tty = NULL;
307 		if (tty != n_hdlc->tty)
308 			return;
309 		if (n_hdlc->backup_tty) {
310 			n_hdlc->tty = n_hdlc->backup_tty;
311 		} else {
312 			n_hdlc_release (n_hdlc);
313 		}
314 	}
315 
316 	if (debuglevel >= DEBUG_LEVEL_INFO)
317 		printk("%s(%d)n_hdlc_tty_close() success\n",__FILE__,__LINE__);
318 
319 }	/* end of n_hdlc_tty_close() */
320 
321 /**
322  * n_hdlc_tty_open - called when line discipline changed to n_hdlc
323  * @tty - pointer to tty info structure
324  *
325  * Returns 0 if success, otherwise error code
326  */
327 static int n_hdlc_tty_open (struct tty_struct *tty)
328 {
329 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
330 
331 	if (debuglevel >= DEBUG_LEVEL_INFO)
332 		printk("%s(%d)n_hdlc_tty_open() called (device=%s)\n",
333 		__FILE__,__LINE__,
334 		tty->name);
335 
336 	/* There should not be an existing table for this slot. */
337 	if (n_hdlc) {
338 		printk (KERN_ERR"n_hdlc_tty_open:tty already associated!\n" );
339 		return -EEXIST;
340 	}
341 
342 	n_hdlc = n_hdlc_alloc();
343 	if (!n_hdlc) {
344 		printk (KERN_ERR "n_hdlc_alloc failed\n");
345 		return -ENFILE;
346 	}
347 
348 	tty->disc_data = n_hdlc;
349 	n_hdlc->tty    = tty;
350 	tty->receive_room = 65536;
351 
352 #if defined(TTY_NO_WRITE_SPLIT)
353 	/* change tty_io write() to not split large writes into 8K chunks */
354 	set_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
355 #endif
356 
357 	/* flush receive data from driver */
358 	tty_driver_flush_buffer(tty);
359 
360 	if (debuglevel >= DEBUG_LEVEL_INFO)
361 		printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__,__LINE__);
362 
363 	return 0;
364 
365 }	/* end of n_tty_hdlc_open() */
366 
367 /**
368  * n_hdlc_send_frames - send frames on pending send buffer list
369  * @n_hdlc - pointer to ldisc instance data
370  * @tty - pointer to tty instance data
371  *
372  * Send frames on pending send buffer list until the driver does not accept a
373  * frame (busy) this function is called after adding a frame to the send buffer
374  * list and by the tty wakeup callback.
375  */
376 static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
377 {
378 	register int actual;
379 	unsigned long flags;
380 	struct n_hdlc_buf *tbuf;
381 
382 	if (debuglevel >= DEBUG_LEVEL_INFO)
383 		printk("%s(%d)n_hdlc_send_frames() called\n",__FILE__,__LINE__);
384  check_again:
385 
386  	spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
387 	if (n_hdlc->tbusy) {
388 		n_hdlc->woke_up = 1;
389  		spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
390 		return;
391 	}
392 	n_hdlc->tbusy = 1;
393 	n_hdlc->woke_up = 0;
394 	spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
395 
396 	tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
397 	while (tbuf) {
398 		if (debuglevel >= DEBUG_LEVEL_INFO)
399 			printk("%s(%d)sending frame %p, count=%d\n",
400 				__FILE__,__LINE__,tbuf,tbuf->count);
401 
402 		/* Send the next block of data to device */
403 		set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
404 		actual = tty->ops->write(tty, tbuf->buf, tbuf->count);
405 
406 		/* rollback was possible and has been done */
407 		if (actual == -ERESTARTSYS) {
408 			n_hdlc_buf_return(&n_hdlc->tx_buf_list, tbuf);
409 			break;
410 		}
411 		/* if transmit error, throw frame away by */
412 		/* pretending it was accepted by driver */
413 		if (actual < 0)
414 			actual = tbuf->count;
415 
416 		if (actual == tbuf->count) {
417 			if (debuglevel >= DEBUG_LEVEL_INFO)
418 				printk("%s(%d)frame %p completed\n",
419 					__FILE__,__LINE__,tbuf);
420 
421 			/* free current transmit buffer */
422 			n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, tbuf);
423 
424 			/* wait up sleeping writers */
425 			wake_up_interruptible(&tty->write_wait);
426 
427 			/* get next pending transmit buffer */
428 			tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
429 		} else {
430 			if (debuglevel >= DEBUG_LEVEL_INFO)
431 				printk("%s(%d)frame %p pending\n",
432 					__FILE__,__LINE__,tbuf);
433 
434 			/*
435 			 * the buffer was not accepted by driver,
436 			 * return it back into tx queue
437 			 */
438 			n_hdlc_buf_return(&n_hdlc->tx_buf_list, tbuf);
439 			break;
440 		}
441 	}
442 
443 	if (!tbuf)
444 		clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
445 
446 	/* Clear the re-entry flag */
447 	spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
448 	n_hdlc->tbusy = 0;
449 	spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
450 
451         if (n_hdlc->woke_up)
452 	  goto check_again;
453 
454 	if (debuglevel >= DEBUG_LEVEL_INFO)
455 		printk("%s(%d)n_hdlc_send_frames() exit\n",__FILE__,__LINE__);
456 
457 }	/* end of n_hdlc_send_frames() */
458 
459 /**
460  * n_hdlc_tty_wakeup - Callback for transmit wakeup
461  * @tty	- pointer to associated tty instance data
462  *
463  * Called when low level device driver can accept more send data.
464  */
465 static void n_hdlc_tty_wakeup(struct tty_struct *tty)
466 {
467 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
468 
469 	if (debuglevel >= DEBUG_LEVEL_INFO)
470 		printk("%s(%d)n_hdlc_tty_wakeup() called\n",__FILE__,__LINE__);
471 
472 	if (!n_hdlc)
473 		return;
474 
475 	if (tty != n_hdlc->tty) {
476 		clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
477 		return;
478 	}
479 
480 	n_hdlc_send_frames (n_hdlc, tty);
481 
482 }	/* end of n_hdlc_tty_wakeup() */
483 
484 /**
485  * n_hdlc_tty_receive - Called by tty driver when receive data is available
486  * @tty	- pointer to tty instance data
487  * @data - pointer to received data
488  * @flags - pointer to flags for data
489  * @count - count of received data in bytes
490  *
491  * Called by tty low level driver when receive data is available. Data is
492  * interpreted as one HDLC frame.
493  */
494 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data,
495 			       char *flags, int count)
496 {
497 	register struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
498 	register struct n_hdlc_buf *buf;
499 
500 	if (debuglevel >= DEBUG_LEVEL_INFO)
501 		printk("%s(%d)n_hdlc_tty_receive() called count=%d\n",
502 			__FILE__,__LINE__, count);
503 
504 	/* This can happen if stuff comes in on the backup tty */
505 	if (!n_hdlc || tty != n_hdlc->tty)
506 		return;
507 
508 	/* verify line is using HDLC discipline */
509 	if (n_hdlc->magic != HDLC_MAGIC) {
510 		printk("%s(%d) line not using HDLC discipline\n",
511 			__FILE__,__LINE__);
512 		return;
513 	}
514 
515 	if ( count>maxframe ) {
516 		if (debuglevel >= DEBUG_LEVEL_INFO)
517 			printk("%s(%d) rx count>maxframesize, data discarded\n",
518 			       __FILE__,__LINE__);
519 		return;
520 	}
521 
522 	/* get a free HDLC buffer */
523 	buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
524 	if (!buf) {
525 		/* no buffers in free list, attempt to allocate another rx buffer */
526 		/* unless the maximum count has been reached */
527 		if (n_hdlc->rx_buf_list.count < MAX_RX_BUF_COUNT)
528 			buf = kmalloc(N_HDLC_BUF_SIZE, GFP_ATOMIC);
529 	}
530 
531 	if (!buf) {
532 		if (debuglevel >= DEBUG_LEVEL_INFO)
533 			printk("%s(%d) no more rx buffers, data discarded\n",
534 			       __FILE__,__LINE__);
535 		return;
536 	}
537 
538 	/* copy received data to HDLC buffer */
539 	memcpy(buf->buf,data,count);
540 	buf->count=count;
541 
542 	/* add HDLC buffer to list of received frames */
543 	n_hdlc_buf_put(&n_hdlc->rx_buf_list, buf);
544 
545 	/* wake up any blocked reads and perform async signalling */
546 	wake_up_interruptible (&tty->read_wait);
547 	if (n_hdlc->tty->fasync != NULL)
548 		kill_fasync (&n_hdlc->tty->fasync, SIGIO, POLL_IN);
549 
550 }	/* end of n_hdlc_tty_receive() */
551 
552 /**
553  * n_hdlc_tty_read - Called to retrieve one frame of data (if available)
554  * @tty - pointer to tty instance data
555  * @file - pointer to open file object
556  * @buf - pointer to returned data buffer
557  * @nr - size of returned data buffer
558  *
559  * Returns the number of bytes returned or error code.
560  */
561 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
562 			   __u8 __user *buf, size_t nr)
563 {
564 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
565 	int ret = 0;
566 	struct n_hdlc_buf *rbuf;
567 	DECLARE_WAITQUEUE(wait, current);
568 
569 	if (debuglevel >= DEBUG_LEVEL_INFO)
570 		printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__);
571 
572 	/* Validate the pointers */
573 	if (!n_hdlc)
574 		return -EIO;
575 
576 	/* verify user access to buffer */
577 	if (!access_ok(VERIFY_WRITE, buf, nr)) {
578 		printk(KERN_WARNING "%s(%d) n_hdlc_tty_read() can't verify user "
579 		"buffer\n", __FILE__, __LINE__);
580 		return -EFAULT;
581 	}
582 
583 	add_wait_queue(&tty->read_wait, &wait);
584 
585 	for (;;) {
586 		if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
587 			ret = -EIO;
588 			break;
589 		}
590 		if (tty_hung_up_p(file))
591 			break;
592 
593 		set_current_state(TASK_INTERRUPTIBLE);
594 
595 		rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
596 		if (rbuf) {
597 			if (rbuf->count > nr) {
598 				/* too large for caller's buffer */
599 				ret = -EOVERFLOW;
600 			} else {
601 				if (copy_to_user(buf, rbuf->buf, rbuf->count))
602 					ret = -EFAULT;
603 				else
604 					ret = rbuf->count;
605 			}
606 
607 			if (n_hdlc->rx_free_buf_list.count >
608 			    DEFAULT_RX_BUF_COUNT)
609 				kfree(rbuf);
610 			else
611 				n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, rbuf);
612 			break;
613 		}
614 
615 		/* no data */
616 		if (file->f_flags & O_NONBLOCK) {
617 			ret = -EAGAIN;
618 			break;
619 		}
620 
621 		schedule();
622 
623 		if (signal_pending(current)) {
624 			ret = -EINTR;
625 			break;
626 		}
627 	}
628 
629 	remove_wait_queue(&tty->read_wait, &wait);
630 	__set_current_state(TASK_RUNNING);
631 
632 	return ret;
633 
634 }	/* end of n_hdlc_tty_read() */
635 
636 /**
637  * n_hdlc_tty_write - write a single frame of data to device
638  * @tty	- pointer to associated tty device instance data
639  * @file - pointer to file object data
640  * @data - pointer to transmit data (one frame)
641  * @count - size of transmit frame in bytes
642  *
643  * Returns the number of bytes written (or error code).
644  */
645 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
646 			    const unsigned char *data, size_t count)
647 {
648 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
649 	int error = 0;
650 	DECLARE_WAITQUEUE(wait, current);
651 	struct n_hdlc_buf *tbuf;
652 
653 	if (debuglevel >= DEBUG_LEVEL_INFO)
654 		printk("%s(%d)n_hdlc_tty_write() called count=%zd\n",
655 			__FILE__,__LINE__,count);
656 
657 	/* Verify pointers */
658 	if (!n_hdlc)
659 		return -EIO;
660 
661 	if (n_hdlc->magic != HDLC_MAGIC)
662 		return -EIO;
663 
664 	/* verify frame size */
665 	if (count > maxframe ) {
666 		if (debuglevel & DEBUG_LEVEL_INFO)
667 			printk (KERN_WARNING
668 				"n_hdlc_tty_write: truncating user packet "
669 				"from %lu to %d\n", (unsigned long) count,
670 				maxframe );
671 		count = maxframe;
672 	}
673 
674 	add_wait_queue(&tty->write_wait, &wait);
675 
676 	for (;;) {
677 		set_current_state(TASK_INTERRUPTIBLE);
678 
679 		tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list);
680 		if (tbuf)
681 			break;
682 
683 		if (file->f_flags & O_NONBLOCK) {
684 			error = -EAGAIN;
685 			break;
686 		}
687 		schedule();
688 
689 		n_hdlc = tty2n_hdlc (tty);
690 		if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC ||
691 		    tty != n_hdlc->tty) {
692 			printk("n_hdlc_tty_write: %p invalid after wait!\n", n_hdlc);
693 			error = -EIO;
694 			break;
695 		}
696 
697 		if (signal_pending(current)) {
698 			error = -EINTR;
699 			break;
700 		}
701 	}
702 
703 	__set_current_state(TASK_RUNNING);
704 	remove_wait_queue(&tty->write_wait, &wait);
705 
706 	if (!error) {
707 		/* Retrieve the user's buffer */
708 		memcpy(tbuf->buf, data, count);
709 
710 		/* Send the data */
711 		tbuf->count = error = count;
712 		n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf);
713 		n_hdlc_send_frames(n_hdlc,tty);
714 	}
715 
716 	return error;
717 
718 }	/* end of n_hdlc_tty_write() */
719 
720 /**
721  * n_hdlc_tty_ioctl - process IOCTL system call for the tty device.
722  * @tty - pointer to tty instance data
723  * @file - pointer to open file object for device
724  * @cmd - IOCTL command code
725  * @arg - argument for IOCTL call (cmd dependent)
726  *
727  * Returns command dependent result.
728  */
729 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
730 			    unsigned int cmd, unsigned long arg)
731 {
732 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
733 	int error = 0;
734 	int count;
735 	unsigned long flags;
736 	struct n_hdlc_buf *buf = NULL;
737 
738 	if (debuglevel >= DEBUG_LEVEL_INFO)
739 		printk("%s(%d)n_hdlc_tty_ioctl() called %d\n",
740 			__FILE__,__LINE__,cmd);
741 
742 	/* Verify the status of the device */
743 	if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC)
744 		return -EBADF;
745 
746 	switch (cmd) {
747 	case FIONREAD:
748 		/* report count of read data available */
749 		/* in next available frame (if any) */
750 		spin_lock_irqsave(&n_hdlc->rx_buf_list.spinlock,flags);
751 		buf = list_first_entry_or_null(&n_hdlc->rx_buf_list.list,
752 						struct n_hdlc_buf, list_item);
753 		if (buf)
754 			count = buf->count;
755 		else
756 			count = 0;
757 		spin_unlock_irqrestore(&n_hdlc->rx_buf_list.spinlock,flags);
758 		error = put_user(count, (int __user *)arg);
759 		break;
760 
761 	case TIOCOUTQ:
762 		/* get the pending tx byte count in the driver */
763 		count = tty_chars_in_buffer(tty);
764 		/* add size of next output frame in queue */
765 		spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock,flags);
766 		buf = list_first_entry_or_null(&n_hdlc->tx_buf_list.list,
767 						struct n_hdlc_buf, list_item);
768 		if (buf)
769 			count += buf->count;
770 		spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock,flags);
771 		error = put_user(count, (int __user *)arg);
772 		break;
773 
774 	case TCFLSH:
775 		switch (arg) {
776 		case TCIOFLUSH:
777 		case TCOFLUSH:
778 			flush_tx_queue(tty);
779 		}
780 		/* fall through to default */
781 
782 	default:
783 		error = n_tty_ioctl_helper(tty, file, cmd, arg);
784 		break;
785 	}
786 	return error;
787 
788 }	/* end of n_hdlc_tty_ioctl() */
789 
790 /**
791  * n_hdlc_tty_poll - TTY callback for poll system call
792  * @tty - pointer to tty instance data
793  * @filp - pointer to open file object for device
794  * @poll_table - wait queue for operations
795  *
796  * Determine which operations (read/write) will not block and return info
797  * to caller.
798  * Returns a bit mask containing info on which ops will not block.
799  */
800 static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
801 				    poll_table *wait)
802 {
803 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
804 	unsigned int mask = 0;
805 
806 	if (debuglevel >= DEBUG_LEVEL_INFO)
807 		printk("%s(%d)n_hdlc_tty_poll() called\n",__FILE__,__LINE__);
808 
809 	if (n_hdlc && n_hdlc->magic == HDLC_MAGIC && tty == n_hdlc->tty) {
810 		/* queue current process into any wait queue that */
811 		/* may awaken in the future (read and write) */
812 
813 		poll_wait(filp, &tty->read_wait, wait);
814 		poll_wait(filp, &tty->write_wait, wait);
815 
816 		/* set bits for operations that won't block */
817 		if (!list_empty(&n_hdlc->rx_buf_list.list))
818 			mask |= POLLIN | POLLRDNORM;	/* readable */
819 		if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
820 			mask |= POLLHUP;
821 		if (tty_hung_up_p(filp))
822 			mask |= POLLHUP;
823 		if (!tty_is_writelocked(tty) &&
824 				!list_empty(&n_hdlc->tx_free_buf_list.list))
825 			mask |= POLLOUT | POLLWRNORM;	/* writable */
826 	}
827 	return mask;
828 }	/* end of n_hdlc_tty_poll() */
829 
830 /**
831  * n_hdlc_alloc - allocate an n_hdlc instance data structure
832  *
833  * Returns a pointer to newly created structure if success, otherwise %NULL
834  */
835 static struct n_hdlc *n_hdlc_alloc(void)
836 {
837 	struct n_hdlc_buf *buf;
838 	int i;
839 	struct n_hdlc *n_hdlc = kzalloc(sizeof(*n_hdlc), GFP_KERNEL);
840 
841 	if (!n_hdlc)
842 		return NULL;
843 
844 	spin_lock_init(&n_hdlc->rx_free_buf_list.spinlock);
845 	spin_lock_init(&n_hdlc->tx_free_buf_list.spinlock);
846 	spin_lock_init(&n_hdlc->rx_buf_list.spinlock);
847 	spin_lock_init(&n_hdlc->tx_buf_list.spinlock);
848 
849 	INIT_LIST_HEAD(&n_hdlc->rx_free_buf_list.list);
850 	INIT_LIST_HEAD(&n_hdlc->tx_free_buf_list.list);
851 	INIT_LIST_HEAD(&n_hdlc->rx_buf_list.list);
852 	INIT_LIST_HEAD(&n_hdlc->tx_buf_list.list);
853 
854 	/* allocate free rx buffer list */
855 	for(i=0;i<DEFAULT_RX_BUF_COUNT;i++) {
856 		buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
857 		if (buf)
858 			n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,buf);
859 		else if (debuglevel >= DEBUG_LEVEL_INFO)
860 			printk("%s(%d)n_hdlc_alloc(), kalloc() failed for rx buffer %d\n",__FILE__,__LINE__, i);
861 	}
862 
863 	/* allocate free tx buffer list */
864 	for(i=0;i<DEFAULT_TX_BUF_COUNT;i++) {
865 		buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
866 		if (buf)
867 			n_hdlc_buf_put(&n_hdlc->tx_free_buf_list,buf);
868 		else if (debuglevel >= DEBUG_LEVEL_INFO)
869 			printk("%s(%d)n_hdlc_alloc(), kalloc() failed for tx buffer %d\n",__FILE__,__LINE__, i);
870 	}
871 
872 	/* Initialize the control block */
873 	n_hdlc->magic  = HDLC_MAGIC;
874 	n_hdlc->flags  = 0;
875 
876 	return n_hdlc;
877 
878 }	/* end of n_hdlc_alloc() */
879 
880 /**
881  * n_hdlc_buf_return - put the HDLC buffer after the head of the specified list
882  * @buf_list - pointer to the buffer list
883  * @buf - pointer to the buffer
884  */
885 static void n_hdlc_buf_return(struct n_hdlc_buf_list *buf_list,
886 						struct n_hdlc_buf *buf)
887 {
888 	unsigned long flags;
889 
890 	spin_lock_irqsave(&buf_list->spinlock, flags);
891 
892 	list_add(&buf->list_item, &buf_list->list);
893 	buf_list->count++;
894 
895 	spin_unlock_irqrestore(&buf_list->spinlock, flags);
896 }
897 
898 /**
899  * n_hdlc_buf_put - add specified HDLC buffer to tail of specified list
900  * @buf_list - pointer to buffer list
901  * @buf	- pointer to buffer
902  */
903 static void n_hdlc_buf_put(struct n_hdlc_buf_list *buf_list,
904 			   struct n_hdlc_buf *buf)
905 {
906 	unsigned long flags;
907 
908 	spin_lock_irqsave(&buf_list->spinlock, flags);
909 
910 	list_add_tail(&buf->list_item, &buf_list->list);
911 	buf_list->count++;
912 
913 	spin_unlock_irqrestore(&buf_list->spinlock, flags);
914 }	/* end of n_hdlc_buf_put() */
915 
916 /**
917  * n_hdlc_buf_get - remove and return an HDLC buffer from list
918  * @buf_list - pointer to HDLC buffer list
919  *
920  * Remove and return an HDLC buffer from the head of the specified HDLC buffer
921  * list.
922  * Returns a pointer to HDLC buffer if available, otherwise %NULL.
923  */
924 static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *buf_list)
925 {
926 	unsigned long flags;
927 	struct n_hdlc_buf *buf;
928 
929 	spin_lock_irqsave(&buf_list->spinlock, flags);
930 
931 	buf = list_first_entry_or_null(&buf_list->list,
932 						struct n_hdlc_buf, list_item);
933 	if (buf) {
934 		list_del(&buf->list_item);
935 		buf_list->count--;
936 	}
937 
938 	spin_unlock_irqrestore(&buf_list->spinlock, flags);
939 	return buf;
940 }	/* end of n_hdlc_buf_get() */
941 
942 static const char hdlc_banner[] __initconst =
943 	KERN_INFO "HDLC line discipline maxframe=%u\n";
944 static const char hdlc_register_ok[] __initconst =
945 	KERN_INFO "N_HDLC line discipline registered.\n";
946 static const char hdlc_register_fail[] __initconst =
947 	KERN_ERR "error registering line discipline: %d\n";
948 
949 static int __init n_hdlc_init(void)
950 {
951 	int status;
952 
953 	/* range check maxframe arg */
954 	if (maxframe < 4096)
955 		maxframe = 4096;
956 	else if (maxframe > 65535)
957 		maxframe = 65535;
958 
959 	printk(hdlc_banner, maxframe);
960 
961 	status = tty_register_ldisc(N_HDLC, &n_hdlc_ldisc);
962 	if (!status)
963 		printk(hdlc_register_ok);
964 	else
965 		printk(hdlc_register_fail, status);
966 
967 	return status;
968 
969 }	/* end of init_module() */
970 
971 static const char hdlc_unregister_ok[] __exitdata =
972 	KERN_INFO "N_HDLC: line discipline unregistered\n";
973 static const char hdlc_unregister_fail[] __exitdata =
974 	KERN_ERR "N_HDLC: can't unregister line discipline (err = %d)\n";
975 
976 static void __exit n_hdlc_exit(void)
977 {
978 	/* Release tty registration of line discipline */
979 	int status = tty_unregister_ldisc(N_HDLC);
980 
981 	if (status)
982 		printk(hdlc_unregister_fail, status);
983 	else
984 		printk(hdlc_unregister_ok);
985 }
986 
987 module_init(n_hdlc_init);
988 module_exit(n_hdlc_exit);
989 
990 MODULE_LICENSE("GPL");
991 MODULE_AUTHOR("Paul Fulghum paulkf@microgate.com");
992 module_param(debuglevel, int, 0);
993 module_param(maxframe, int, 0);
994 MODULE_ALIAS_LDISC(N_HDLC);
995