1 // SPDX-License-Identifier: GPL-2.0+
2 /*****************************************************************************/
3 /*
4 * moxa.c -- MOXA Intellio family multiport serial driver.
5 *
6 * Copyright (C) 1999-2000 Moxa Technologies (support@moxa.com).
7 * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
8 *
9 * This code is loosely based on the Linux serial driver, written by
10 * Linus Torvalds, Theodore T'so and others.
11 */
12
13 /*
14 * MOXA Intellio Series Driver
15 * for : LINUX
16 * date : 1999/1/7
17 * version : 5.1
18 */
19
20 #include <linux/module.h>
21 #include <linux/types.h>
22 #include <linux/mm.h>
23 #include <linux/ioport.h>
24 #include <linux/errno.h>
25 #include <linux/firmware.h>
26 #include <linux/signal.h>
27 #include <linux/sched.h>
28 #include <linux/timer.h>
29 #include <linux/interrupt.h>
30 #include <linux/tty.h>
31 #include <linux/tty_flip.h>
32 #include <linux/major.h>
33 #include <linux/string.h>
34 #include <linux/fcntl.h>
35 #include <linux/ptrace.h>
36 #include <linux/serial.h>
37 #include <linux/tty_driver.h>
38 #include <linux/delay.h>
39 #include <linux/pci.h>
40 #include <linux/init.h>
41 #include <linux/bitops.h>
42 #include <linux/slab.h>
43 #include <linux/ratelimit.h>
44
45 #include <asm/io.h>
46 #include <linux/uaccess.h>
47
48 #define MOXA 0x400
49 #define MOXA_GET_IQUEUE (MOXA + 1) /* get input buffered count */
50 #define MOXA_GET_OQUEUE (MOXA + 2) /* get output buffered count */
51 #define MOXA_GETDATACOUNT (MOXA + 23)
52 #define MOXA_GET_IOQUEUE (MOXA + 27)
53 #define MOXA_FLUSH_QUEUE (MOXA + 28)
54 #define MOXA_GETMSTATUS (MOXA + 65)
55
56 /*
57 * System Configuration
58 */
59
60 #define Magic_code 0x404
61
62 /*
63 * for C218 BIOS initialization
64 */
65 #define C218_ConfBase 0x800
66 #define C218_status (C218_ConfBase + 0) /* BIOS running status */
67 #define C218_diag (C218_ConfBase + 2) /* diagnostic status */
68 #define C218_key (C218_ConfBase + 4) /* WORD (0x218 for C218) */
69 #define C218DLoad_len (C218_ConfBase + 6) /* WORD */
70 #define C218check_sum (C218_ConfBase + 8) /* BYTE */
71 #define C218chksum_ok (C218_ConfBase + 0x0a) /* BYTE (1:ok) */
72 #define C218_TestRx (C218_ConfBase + 0x10) /* 8 bytes for 8 ports */
73 #define C218_TestTx (C218_ConfBase + 0x18) /* 8 bytes for 8 ports */
74 #define C218_RXerr (C218_ConfBase + 0x20) /* 8 bytes for 8 ports */
75 #define C218_ErrFlag (C218_ConfBase + 0x28) /* 8 bytes for 8 ports */
76
77 #define C218_LoadBuf 0x0F00
78 #define C218_KeyCode 0x218
79 #define CP204J_KeyCode 0x204
80
81 /*
82 * for C320 BIOS initialization
83 */
84 #define C320_ConfBase 0x800
85 #define C320_LoadBuf 0x0f00
86 #define STS_init 0x05 /* for C320_status */
87
88 #define C320_status C320_ConfBase + 0 /* BIOS running status */
89 #define C320_diag C320_ConfBase + 2 /* diagnostic status */
90 #define C320_key C320_ConfBase + 4 /* WORD (0320H for C320) */
91 #define C320DLoad_len C320_ConfBase + 6 /* WORD */
92 #define C320check_sum C320_ConfBase + 8 /* WORD */
93 #define C320chksum_ok C320_ConfBase + 0x0a /* WORD (1:ok) */
94 #define C320bapi_len C320_ConfBase + 0x0c /* WORD */
95 #define C320UART_no C320_ConfBase + 0x0e /* WORD */
96
97 #define C320_KeyCode 0x320
98
99 #define FixPage_addr 0x0000 /* starting addr of static page */
100 #define DynPage_addr 0x2000 /* starting addr of dynamic page */
101 #define C218_start 0x3000 /* starting addr of C218 BIOS prg */
102 #define Control_reg 0x1ff0 /* select page and reset control */
103 #define HW_reset 0x80
104
105 /*
106 * Function Codes
107 */
108 #define FC_CardReset 0x80
109 #define FC_ChannelReset 1 /* C320 firmware not supported */
110 #define FC_EnableCH 2
111 #define FC_DisableCH 3
112 #define FC_SetParam 4
113 #define FC_SetMode 5
114 #define FC_SetRate 6
115 #define FC_LineControl 7
116 #define FC_LineStatus 8
117 #define FC_XmitControl 9
118 #define FC_FlushQueue 10
119 #define FC_SendBreak 11
120 #define FC_StopBreak 12
121 #define FC_LoopbackON 13
122 #define FC_LoopbackOFF 14
123 #define FC_ClrIrqTable 15
124 #define FC_SendXon 16
125 #define FC_SetTermIrq 17 /* C320 firmware not supported */
126 #define FC_SetCntIrq 18 /* C320 firmware not supported */
127 #define FC_SetBreakIrq 19
128 #define FC_SetLineIrq 20
129 #define FC_SetFlowCtl 21
130 #define FC_GenIrq 22
131 #define FC_InCD180 23
132 #define FC_OutCD180 24
133 #define FC_InUARTreg 23
134 #define FC_OutUARTreg 24
135 #define FC_SetXonXoff 25
136 #define FC_OutCD180CCR 26
137 #define FC_ExtIQueue 27
138 #define FC_ExtOQueue 28
139 #define FC_ClrLineIrq 29
140 #define FC_HWFlowCtl 30
141 #define FC_GetClockRate 35
142 #define FC_SetBaud 36
143 #define FC_SetDataMode 41
144 #define FC_GetCCSR 43
145 #define FC_GetDataError 45
146 #define FC_RxControl 50
147 #define FC_ImmSend 51
148 #define FC_SetXonState 52
149 #define FC_SetXoffState 53
150 #define FC_SetRxFIFOTrig 54
151 #define FC_SetTxFIFOCnt 55
152 #define FC_UnixRate 56
153 #define FC_UnixResetTimer 57
154
155 #define RxFIFOTrig1 0
156 #define RxFIFOTrig4 1
157 #define RxFIFOTrig8 2
158 #define RxFIFOTrig14 3
159
160 /*
161 * Dual-Ported RAM
162 */
163 #define DRAM_global 0
164 #define INT_data (DRAM_global + 0)
165 #define Config_base (DRAM_global + 0x108)
166
167 #define IRQindex (INT_data + 0)
168 #define IRQpending (INT_data + 4)
169 #define IRQtable (INT_data + 8)
170
171 /*
172 * Interrupt Status
173 */
174 #define IntrRx 0x01 /* receiver data O.K. */
175 #define IntrTx 0x02 /* transmit buffer empty */
176 #define IntrFunc 0x04 /* function complete */
177 #define IntrBreak 0x08 /* received break */
178 #define IntrLine 0x10 /* line status change
179 for transmitter */
180 #define IntrIntr 0x20 /* received INTR code */
181 #define IntrQuit 0x40 /* received QUIT code */
182 #define IntrEOF 0x80 /* received EOF code */
183
184 #define IntrRxTrigger 0x100 /* rx data count reach trigger value */
185 #define IntrTxTrigger 0x200 /* tx data count below trigger value */
186
187 #define Magic_no (Config_base + 0)
188 #define Card_model_no (Config_base + 2)
189 #define Total_ports (Config_base + 4)
190 #define Module_cnt (Config_base + 8)
191 #define Module_no (Config_base + 10)
192 #define Timer_10ms (Config_base + 14)
193 #define Disable_IRQ (Config_base + 20)
194 #define TMS320_PORT1 (Config_base + 22)
195 #define TMS320_PORT2 (Config_base + 24)
196 #define TMS320_CLOCK (Config_base + 26)
197
198 /*
199 * DATA BUFFER in DRAM
200 */
201 #define Extern_table 0x400 /* Base address of the external table
202 (24 words * 64) total 3K bytes
203 (24 words * 128) total 6K bytes */
204 #define Extern_size 0x60 /* 96 bytes */
205 #define RXrptr 0x00 /* read pointer for RX buffer */
206 #define RXwptr 0x02 /* write pointer for RX buffer */
207 #define TXrptr 0x04 /* read pointer for TX buffer */
208 #define TXwptr 0x06 /* write pointer for TX buffer */
209 #define HostStat 0x08 /* IRQ flag and general flag */
210 #define FlagStat 0x0A
211 #define FlowControl 0x0C /* B7 B6 B5 B4 B3 B2 B1 B0 */
212 /* x x x x | | | | */
213 /* | | | + CTS flow */
214 /* | | +--- RTS flow */
215 /* | +------ TX Xon/Xoff */
216 /* +--------- RX Xon/Xoff */
217 #define Break_cnt 0x0E /* received break count */
218 #define CD180TXirq 0x10 /* if non-0: enable TX irq */
219 #define RX_mask 0x12
220 #define TX_mask 0x14
221 #define Ofs_rxb 0x16
222 #define Ofs_txb 0x18
223 #define Page_rxb 0x1A
224 #define Page_txb 0x1C
225 #define EndPage_rxb 0x1E
226 #define EndPage_txb 0x20
227 #define Data_error 0x22
228 #define RxTrigger 0x28
229 #define TxTrigger 0x2a
230
231 #define rRXwptr 0x34
232 #define Low_water 0x36
233
234 #define FuncCode 0x40
235 #define FuncArg 0x42
236 #define FuncArg1 0x44
237
238 #define C218rx_size 0x2000 /* 8K bytes */
239 #define C218tx_size 0x8000 /* 32K bytes */
240
241 #define C218rx_mask (C218rx_size - 1)
242 #define C218tx_mask (C218tx_size - 1)
243
244 #define C320p8rx_size 0x2000
245 #define C320p8tx_size 0x8000
246 #define C320p8rx_mask (C320p8rx_size - 1)
247 #define C320p8tx_mask (C320p8tx_size - 1)
248
249 #define C320p16rx_size 0x2000
250 #define C320p16tx_size 0x4000
251 #define C320p16rx_mask (C320p16rx_size - 1)
252 #define C320p16tx_mask (C320p16tx_size - 1)
253
254 #define C320p24rx_size 0x2000
255 #define C320p24tx_size 0x2000
256 #define C320p24rx_mask (C320p24rx_size - 1)
257 #define C320p24tx_mask (C320p24tx_size - 1)
258
259 #define C320p32rx_size 0x1000
260 #define C320p32tx_size 0x1000
261 #define C320p32rx_mask (C320p32rx_size - 1)
262 #define C320p32tx_mask (C320p32tx_size - 1)
263
264 #define Page_size 0x2000U
265 #define Page_mask (Page_size - 1)
266 #define C218rx_spage 3
267 #define C218tx_spage 4
268 #define C218rx_pageno 1
269 #define C218tx_pageno 4
270 #define C218buf_pageno 5
271
272 #define C320p8rx_spage 3
273 #define C320p8tx_spage 4
274 #define C320p8rx_pgno 1
275 #define C320p8tx_pgno 4
276 #define C320p8buf_pgno 5
277
278 #define C320p16rx_spage 3
279 #define C320p16tx_spage 4
280 #define C320p16rx_pgno 1
281 #define C320p16tx_pgno 2
282 #define C320p16buf_pgno 3
283
284 #define C320p24rx_spage 3
285 #define C320p24tx_spage 4
286 #define C320p24rx_pgno 1
287 #define C320p24tx_pgno 1
288 #define C320p24buf_pgno 2
289
290 #define C320p32rx_spage 3
291 #define C320p32tx_ofs C320p32rx_size
292 #define C320p32tx_spage 3
293 #define C320p32buf_pgno 1
294
295 /*
296 * Host Status
297 */
298 #define WakeupRx 0x01
299 #define WakeupTx 0x02
300 #define WakeupBreak 0x08
301 #define WakeupLine 0x10
302 #define WakeupIntr 0x20
303 #define WakeupQuit 0x40
304 #define WakeupEOF 0x80 /* used in VTIME control */
305 #define WakeupRxTrigger 0x100
306 #define WakeupTxTrigger 0x200
307 /*
308 * Flag status
309 */
310 #define Rx_over 0x01
311 #define Xoff_state 0x02
312 #define Tx_flowOff 0x04
313 #define Tx_enable 0x08
314 #define CTS_state 0x10
315 #define DSR_state 0x20
316 #define DCD_state 0x80
317 /*
318 * FlowControl
319 */
320 #define CTS_FlowCtl 1
321 #define RTS_FlowCtl 2
322 #define Tx_FlowCtl 4
323 #define Rx_FlowCtl 8
324 #define IXM_IXANY 0x10
325
326 #define LowWater 128
327
328 #define DTR_ON 1
329 #define RTS_ON 2
330 #define CTS_ON 1
331 #define DSR_ON 2
332 #define DCD_ON 8
333
334 /* mode definition */
335 #define MX_CS8 0x03
336 #define MX_CS7 0x02
337 #define MX_CS6 0x01
338 #define MX_CS5 0x00
339
340 #define MX_STOP1 0x00
341 #define MX_STOP15 0x04
342 #define MX_STOP2 0x08
343
344 #define MX_PARNONE 0x00
345 #define MX_PAREVEN 0x40
346 #define MX_PARODD 0xC0
347 #define MX_PARMARK 0xA0
348 #define MX_PARSPACE 0x20
349
350 #define MOXA_VERSION "6.0k"
351
352 #define MOXA_FW_HDRLEN 32
353
354 #define MOXAMAJOR 172
355
356 #define MAX_BOARDS 4 /* Don't change this value */
357 #define MAX_PORTS_PER_BOARD 32 /* Don't change this value */
358 #define MAX_PORTS (MAX_BOARDS * MAX_PORTS_PER_BOARD)
359
360 #define MOXA_IS_320(brd) ((brd)->boardType == MOXA_BOARD_C320_ISA || \
361 (brd)->boardType == MOXA_BOARD_C320_PCI)
362
363 /*
364 * Define the Moxa PCI vendor and device IDs.
365 */
366 #define MOXA_BUS_TYPE_ISA 0
367 #define MOXA_BUS_TYPE_PCI 1
368
369 enum {
370 MOXA_BOARD_C218_PCI = 1,
371 MOXA_BOARD_C218_ISA,
372 MOXA_BOARD_C320_PCI,
373 MOXA_BOARD_C320_ISA,
374 MOXA_BOARD_CP204J,
375 };
376
377 static char *moxa_brdname[] =
378 {
379 "C218 Turbo PCI series",
380 "C218 Turbo ISA series",
381 "C320 Turbo PCI series",
382 "C320 Turbo ISA series",
383 "CP-204J series",
384 };
385
386 #ifdef CONFIG_PCI
387 static const struct pci_device_id moxa_pcibrds[] = {
388 { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C218),
389 .driver_data = MOXA_BOARD_C218_PCI },
390 { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C320),
391 .driver_data = MOXA_BOARD_C320_PCI },
392 { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP204J),
393 .driver_data = MOXA_BOARD_CP204J },
394 { 0 }
395 };
396 MODULE_DEVICE_TABLE(pci, moxa_pcibrds);
397 #endif /* CONFIG_PCI */
398
399 struct moxa_port;
400
401 static struct moxa_board_conf {
402 int boardType;
403 int numPorts;
404 int busType;
405
406 unsigned int ready;
407
408 struct moxa_port *ports;
409
410 void __iomem *basemem;
411 void __iomem *intNdx;
412 void __iomem *intPend;
413 void __iomem *intTable;
414 } moxa_boards[MAX_BOARDS];
415
416 struct mxser_mstatus {
417 tcflag_t cflag;
418 int cts;
419 int dsr;
420 int ri;
421 int dcd;
422 };
423
424 struct moxaq_str {
425 int inq;
426 int outq;
427 };
428
429 struct moxa_port {
430 struct tty_port port;
431 struct moxa_board_conf *board;
432 void __iomem *tableAddr;
433
434 int type;
435 int cflag;
436 unsigned long statusflags;
437
438 u8 DCDState; /* Protected by the port lock */
439 u8 lineCtrl;
440 u8 lowChkFlag;
441 };
442
443 struct mon_str {
444 int tick;
445 int rxcnt[MAX_PORTS];
446 int txcnt[MAX_PORTS];
447 };
448
449 /* statusflags */
450 #define TXSTOPPED 1
451 #define LOWWAIT 2
452 #define EMPTYWAIT 3
453
454
455 #define WAKEUP_CHARS 256
456
457 static int ttymajor = MOXAMAJOR;
458 static struct mon_str moxaLog;
459 static unsigned int moxaFuncTout = HZ / 2;
460 static unsigned int moxaLowWaterChk;
461 static DEFINE_MUTEX(moxa_openlock);
462 static DEFINE_SPINLOCK(moxa_lock);
463
464 static unsigned long baseaddr[MAX_BOARDS];
465 static unsigned int type[MAX_BOARDS];
466 static unsigned int numports[MAX_BOARDS];
467 static struct tty_port moxa_service_port;
468
469 MODULE_AUTHOR("William Chen");
470 MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
471 MODULE_LICENSE("GPL");
472 MODULE_FIRMWARE("c218tunx.cod");
473 MODULE_FIRMWARE("cp204unx.cod");
474 MODULE_FIRMWARE("c320tunx.cod");
475
476 module_param_array(type, uint, NULL, 0);
477 MODULE_PARM_DESC(type, "card type: C218=2, C320=4");
478 module_param_hw_array(baseaddr, ulong, ioport, NULL, 0);
479 MODULE_PARM_DESC(baseaddr, "base address");
480 module_param_array(numports, uint, NULL, 0);
481 MODULE_PARM_DESC(numports, "numports (ignored for C218)");
482
483 module_param(ttymajor, int, 0);
484
485 /*
486 * static functions:
487 */
488 static int moxa_open(struct tty_struct *, struct file *);
489 static void moxa_close(struct tty_struct *, struct file *);
490 static ssize_t moxa_write(struct tty_struct *, const u8 *, size_t);
491 static unsigned int moxa_write_room(struct tty_struct *);
492 static void moxa_flush_buffer(struct tty_struct *);
493 static unsigned int moxa_chars_in_buffer(struct tty_struct *);
494 static void moxa_set_termios(struct tty_struct *, const struct ktermios *);
495 static void moxa_stop(struct tty_struct *);
496 static void moxa_start(struct tty_struct *);
497 static void moxa_hangup(struct tty_struct *);
498 static int moxa_tiocmget(struct tty_struct *tty);
499 static int moxa_tiocmset(struct tty_struct *tty,
500 unsigned int set, unsigned int clear);
501 static void moxa_poll(struct timer_list *);
502 static void moxa_set_tty_param(struct tty_struct *, const struct ktermios *);
503 static void moxa_shutdown(struct tty_port *);
504 static bool moxa_carrier_raised(struct tty_port *);
505 static void moxa_dtr_rts(struct tty_port *, bool);
506 /*
507 * moxa board interface functions:
508 */
509 static void MoxaPortEnable(struct moxa_port *);
510 static void MoxaPortDisable(struct moxa_port *);
511 static int MoxaPortSetTermio(struct moxa_port *, struct ktermios *, speed_t);
512 static int MoxaPortGetLineOut(struct moxa_port *, bool *, bool *);
513 static void MoxaPortLineCtrl(struct moxa_port *, bool, bool);
514 static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int);
515 static int MoxaPortLineStatus(struct moxa_port *);
516 static void MoxaPortFlushData(struct moxa_port *, int);
517 static int MoxaPortWriteData(struct tty_struct *, const unsigned char *, int);
518 static int MoxaPortReadData(struct moxa_port *);
519 static unsigned int MoxaPortTxQueue(struct moxa_port *);
520 static int MoxaPortRxQueue(struct moxa_port *);
521 static unsigned int MoxaPortTxFree(struct moxa_port *);
522 static void MoxaPortTxDisable(struct moxa_port *);
523 static void MoxaPortTxEnable(struct moxa_port *);
524 static int moxa_get_serial_info(struct tty_struct *, struct serial_struct *);
525 static int moxa_set_serial_info(struct tty_struct *, struct serial_struct *);
526 static void MoxaSetFifo(struct moxa_port *port, int enable);
527
528 /*
529 * I/O functions
530 */
531
532 static DEFINE_SPINLOCK(moxafunc_lock);
533
moxa_wait_finish(void __iomem * ofsAddr)534 static void moxa_wait_finish(void __iomem *ofsAddr)
535 {
536 unsigned long end = jiffies + moxaFuncTout;
537
538 while (readw(ofsAddr + FuncCode) != 0)
539 if (time_after(jiffies, end))
540 return;
541 if (readw(ofsAddr + FuncCode) != 0)
542 printk_ratelimited(KERN_WARNING "moxa function expired\n");
543 }
544
moxafunc(void __iomem * ofsAddr,u16 cmd,u16 arg)545 static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg)
546 {
547 unsigned long flags;
548 spin_lock_irqsave(&moxafunc_lock, flags);
549 writew(arg, ofsAddr + FuncArg);
550 writew(cmd, ofsAddr + FuncCode);
551 moxa_wait_finish(ofsAddr);
552 spin_unlock_irqrestore(&moxafunc_lock, flags);
553 }
554
moxafuncret(void __iomem * ofsAddr,u16 cmd,u16 arg)555 static int moxafuncret(void __iomem *ofsAddr, u16 cmd, u16 arg)
556 {
557 unsigned long flags;
558 u16 ret;
559 spin_lock_irqsave(&moxafunc_lock, flags);
560 writew(arg, ofsAddr + FuncArg);
561 writew(cmd, ofsAddr + FuncCode);
562 moxa_wait_finish(ofsAddr);
563 ret = readw(ofsAddr + FuncArg);
564 spin_unlock_irqrestore(&moxafunc_lock, flags);
565 return ret;
566 }
567
moxa_low_water_check(void __iomem * ofsAddr)568 static void moxa_low_water_check(void __iomem *ofsAddr)
569 {
570 u16 rptr, wptr, mask, len;
571
572 if (readb(ofsAddr + FlagStat) & Xoff_state) {
573 rptr = readw(ofsAddr + RXrptr);
574 wptr = readw(ofsAddr + RXwptr);
575 mask = readw(ofsAddr + RX_mask);
576 len = (wptr - rptr) & mask;
577 if (len <= Low_water)
578 moxafunc(ofsAddr, FC_SendXon, 0);
579 }
580 }
581
582 /*
583 * TTY operations
584 */
585
moxa_ioctl(struct tty_struct * tty,unsigned int cmd,unsigned long arg)586 static int moxa_ioctl(struct tty_struct *tty,
587 unsigned int cmd, unsigned long arg)
588 {
589 struct moxa_port *ch = tty->driver_data;
590 void __user *argp = (void __user *)arg;
591 int status, ret = 0;
592
593 if (tty->index == MAX_PORTS) {
594 if (cmd != MOXA_GETDATACOUNT && cmd != MOXA_GET_IOQUEUE &&
595 cmd != MOXA_GETMSTATUS)
596 return -EINVAL;
597 } else if (!ch)
598 return -ENODEV;
599
600 switch (cmd) {
601 case MOXA_GETDATACOUNT:
602 moxaLog.tick = jiffies;
603 if (copy_to_user(argp, &moxaLog, sizeof(moxaLog)))
604 ret = -EFAULT;
605 break;
606 case MOXA_FLUSH_QUEUE:
607 MoxaPortFlushData(ch, arg);
608 break;
609 case MOXA_GET_IOQUEUE: {
610 struct moxaq_str __user *argm = argp;
611 struct moxaq_str tmp;
612 struct moxa_port *p;
613 unsigned int i, j;
614
615 for (i = 0; i < MAX_BOARDS; i++) {
616 p = moxa_boards[i].ports;
617 for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
618 memset(&tmp, 0, sizeof(tmp));
619 spin_lock_bh(&moxa_lock);
620 if (moxa_boards[i].ready) {
621 tmp.inq = MoxaPortRxQueue(p);
622 tmp.outq = MoxaPortTxQueue(p);
623 }
624 spin_unlock_bh(&moxa_lock);
625 if (copy_to_user(argm, &tmp, sizeof(tmp)))
626 return -EFAULT;
627 }
628 }
629 break;
630 } case MOXA_GET_OQUEUE:
631 status = MoxaPortTxQueue(ch);
632 ret = put_user(status, (unsigned long __user *)argp);
633 break;
634 case MOXA_GET_IQUEUE:
635 status = MoxaPortRxQueue(ch);
636 ret = put_user(status, (unsigned long __user *)argp);
637 break;
638 case MOXA_GETMSTATUS: {
639 struct mxser_mstatus __user *argm = argp;
640 struct mxser_mstatus tmp;
641 struct moxa_port *p;
642 unsigned int i, j;
643
644 for (i = 0; i < MAX_BOARDS; i++) {
645 p = moxa_boards[i].ports;
646 for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
647 struct tty_struct *ttyp;
648 memset(&tmp, 0, sizeof(tmp));
649 spin_lock_bh(&moxa_lock);
650 if (!moxa_boards[i].ready) {
651 spin_unlock_bh(&moxa_lock);
652 goto copy;
653 }
654
655 status = MoxaPortLineStatus(p);
656 spin_unlock_bh(&moxa_lock);
657
658 if (status & 1)
659 tmp.cts = 1;
660 if (status & 2)
661 tmp.dsr = 1;
662 if (status & 4)
663 tmp.dcd = 1;
664
665 ttyp = tty_port_tty_get(&p->port);
666 if (!ttyp)
667 tmp.cflag = p->cflag;
668 else
669 tmp.cflag = ttyp->termios.c_cflag;
670 tty_kref_put(ttyp);
671 copy:
672 if (copy_to_user(argm, &tmp, sizeof(tmp)))
673 return -EFAULT;
674 }
675 }
676 break;
677 }
678 default:
679 ret = -ENOIOCTLCMD;
680 }
681 return ret;
682 }
683
moxa_break_ctl(struct tty_struct * tty,int state)684 static int moxa_break_ctl(struct tty_struct *tty, int state)
685 {
686 struct moxa_port *port = tty->driver_data;
687
688 moxafunc(port->tableAddr, state ? FC_SendBreak : FC_StopBreak,
689 Magic_code);
690 return 0;
691 }
692
693 static const struct tty_operations moxa_ops = {
694 .open = moxa_open,
695 .close = moxa_close,
696 .write = moxa_write,
697 .write_room = moxa_write_room,
698 .flush_buffer = moxa_flush_buffer,
699 .chars_in_buffer = moxa_chars_in_buffer,
700 .ioctl = moxa_ioctl,
701 .set_termios = moxa_set_termios,
702 .stop = moxa_stop,
703 .start = moxa_start,
704 .hangup = moxa_hangup,
705 .break_ctl = moxa_break_ctl,
706 .tiocmget = moxa_tiocmget,
707 .tiocmset = moxa_tiocmset,
708 .set_serial = moxa_set_serial_info,
709 .get_serial = moxa_get_serial_info,
710 };
711
712 static const struct tty_port_operations moxa_port_ops = {
713 .carrier_raised = moxa_carrier_raised,
714 .dtr_rts = moxa_dtr_rts,
715 .shutdown = moxa_shutdown,
716 };
717
718 static struct tty_driver *moxaDriver;
719 static DEFINE_TIMER(moxaTimer, moxa_poll);
720
721 /*
722 * HW init
723 */
724
moxa_check_fw_model(struct moxa_board_conf * brd,u8 model)725 static int moxa_check_fw_model(struct moxa_board_conf *brd, u8 model)
726 {
727 switch (brd->boardType) {
728 case MOXA_BOARD_C218_ISA:
729 case MOXA_BOARD_C218_PCI:
730 if (model != 1)
731 goto err;
732 break;
733 case MOXA_BOARD_CP204J:
734 if (model != 3)
735 goto err;
736 break;
737 default:
738 if (model != 2)
739 goto err;
740 break;
741 }
742 return 0;
743 err:
744 return -EINVAL;
745 }
746
moxa_check_fw(const void * ptr)747 static int moxa_check_fw(const void *ptr)
748 {
749 const __le16 *lptr = ptr;
750
751 if (*lptr != cpu_to_le16(0x7980))
752 return -EINVAL;
753
754 return 0;
755 }
756
moxa_load_bios(struct moxa_board_conf * brd,const u8 * buf,size_t len)757 static int moxa_load_bios(struct moxa_board_conf *brd, const u8 *buf,
758 size_t len)
759 {
760 void __iomem *baseAddr = brd->basemem;
761 u16 tmp;
762
763 writeb(HW_reset, baseAddr + Control_reg); /* reset */
764 msleep(10);
765 memset_io(baseAddr, 0, 4096);
766 memcpy_toio(baseAddr, buf, len); /* download BIOS */
767 writeb(0, baseAddr + Control_reg); /* restart */
768
769 msleep(2000);
770
771 switch (brd->boardType) {
772 case MOXA_BOARD_C218_ISA:
773 case MOXA_BOARD_C218_PCI:
774 tmp = readw(baseAddr + C218_key);
775 if (tmp != C218_KeyCode)
776 goto err;
777 break;
778 case MOXA_BOARD_CP204J:
779 tmp = readw(baseAddr + C218_key);
780 if (tmp != CP204J_KeyCode)
781 goto err;
782 break;
783 default:
784 tmp = readw(baseAddr + C320_key);
785 if (tmp != C320_KeyCode)
786 goto err;
787 tmp = readw(baseAddr + C320_status);
788 if (tmp != STS_init) {
789 printk(KERN_ERR "MOXA: bios upload failed -- CPU/Basic "
790 "module not found\n");
791 return -EIO;
792 }
793 break;
794 }
795
796 return 0;
797 err:
798 printk(KERN_ERR "MOXA: bios upload failed -- board not found\n");
799 return -EIO;
800 }
801
moxa_load_320b(struct moxa_board_conf * brd,const u8 * ptr,size_t len)802 static int moxa_load_320b(struct moxa_board_conf *brd, const u8 *ptr,
803 size_t len)
804 {
805 void __iomem *baseAddr = brd->basemem;
806
807 if (len < 7168) {
808 printk(KERN_ERR "MOXA: invalid 320 bios -- too short\n");
809 return -EINVAL;
810 }
811
812 writew(len - 7168 - 2, baseAddr + C320bapi_len);
813 writeb(1, baseAddr + Control_reg); /* Select Page 1 */
814 memcpy_toio(baseAddr + DynPage_addr, ptr, 7168);
815 writeb(2, baseAddr + Control_reg); /* Select Page 2 */
816 memcpy_toio(baseAddr + DynPage_addr, ptr + 7168, len - 7168);
817
818 return 0;
819 }
820
moxa_real_load_code(struct moxa_board_conf * brd,const void * ptr,size_t len)821 static int moxa_real_load_code(struct moxa_board_conf *brd, const void *ptr,
822 size_t len)
823 {
824 void __iomem *baseAddr = brd->basemem;
825 const __le16 *uptr = ptr;
826 size_t wlen, len2, j;
827 unsigned long key, loadbuf, loadlen, checksum, checksum_ok;
828 unsigned int i, retry;
829 u16 usum, keycode;
830
831 keycode = (brd->boardType == MOXA_BOARD_CP204J) ? CP204J_KeyCode :
832 C218_KeyCode;
833
834 switch (brd->boardType) {
835 case MOXA_BOARD_CP204J:
836 case MOXA_BOARD_C218_ISA:
837 case MOXA_BOARD_C218_PCI:
838 key = C218_key;
839 loadbuf = C218_LoadBuf;
840 loadlen = C218DLoad_len;
841 checksum = C218check_sum;
842 checksum_ok = C218chksum_ok;
843 break;
844 default:
845 key = C320_key;
846 keycode = C320_KeyCode;
847 loadbuf = C320_LoadBuf;
848 loadlen = C320DLoad_len;
849 checksum = C320check_sum;
850 checksum_ok = C320chksum_ok;
851 break;
852 }
853
854 usum = 0;
855 wlen = len >> 1;
856 for (i = 0; i < wlen; i++)
857 usum += le16_to_cpu(uptr[i]);
858 retry = 0;
859 do {
860 wlen = len >> 1;
861 j = 0;
862 while (wlen) {
863 len2 = (wlen > 2048) ? 2048 : wlen;
864 wlen -= len2;
865 memcpy_toio(baseAddr + loadbuf, ptr + j, len2 << 1);
866 j += len2 << 1;
867
868 writew(len2, baseAddr + loadlen);
869 writew(0, baseAddr + key);
870 for (i = 0; i < 100; i++) {
871 if (readw(baseAddr + key) == keycode)
872 break;
873 msleep(10);
874 }
875 if (readw(baseAddr + key) != keycode)
876 return -EIO;
877 }
878 writew(0, baseAddr + loadlen);
879 writew(usum, baseAddr + checksum);
880 writew(0, baseAddr + key);
881 for (i = 0; i < 100; i++) {
882 if (readw(baseAddr + key) == keycode)
883 break;
884 msleep(10);
885 }
886 retry++;
887 } while ((readb(baseAddr + checksum_ok) != 1) && (retry < 3));
888 if (readb(baseAddr + checksum_ok) != 1)
889 return -EIO;
890
891 writew(0, baseAddr + key);
892 for (i = 0; i < 600; i++) {
893 if (readw(baseAddr + Magic_no) == Magic_code)
894 break;
895 msleep(10);
896 }
897 if (readw(baseAddr + Magic_no) != Magic_code)
898 return -EIO;
899
900 if (MOXA_IS_320(brd)) {
901 if (brd->busType == MOXA_BUS_TYPE_PCI) { /* ASIC board */
902 writew(0x3800, baseAddr + TMS320_PORT1);
903 writew(0x3900, baseAddr + TMS320_PORT2);
904 writew(28499, baseAddr + TMS320_CLOCK);
905 } else {
906 writew(0x3200, baseAddr + TMS320_PORT1);
907 writew(0x3400, baseAddr + TMS320_PORT2);
908 writew(19999, baseAddr + TMS320_CLOCK);
909 }
910 }
911 writew(1, baseAddr + Disable_IRQ);
912 writew(0, baseAddr + Magic_no);
913 for (i = 0; i < 500; i++) {
914 if (readw(baseAddr + Magic_no) == Magic_code)
915 break;
916 msleep(10);
917 }
918 if (readw(baseAddr + Magic_no) != Magic_code)
919 return -EIO;
920
921 if (MOXA_IS_320(brd)) {
922 j = readw(baseAddr + Module_cnt);
923 if (j <= 0)
924 return -EIO;
925 brd->numPorts = j * 8;
926 writew(j, baseAddr + Module_no);
927 writew(0, baseAddr + Magic_no);
928 for (i = 0; i < 600; i++) {
929 if (readw(baseAddr + Magic_no) == Magic_code)
930 break;
931 msleep(10);
932 }
933 if (readw(baseAddr + Magic_no) != Magic_code)
934 return -EIO;
935 }
936 brd->intNdx = baseAddr + IRQindex;
937 brd->intPend = baseAddr + IRQpending;
938 brd->intTable = baseAddr + IRQtable;
939
940 return 0;
941 }
942
moxa_load_code(struct moxa_board_conf * brd,const void * ptr,size_t len)943 static int moxa_load_code(struct moxa_board_conf *brd, const void *ptr,
944 size_t len)
945 {
946 void __iomem *ofsAddr, *baseAddr = brd->basemem;
947 struct moxa_port *port;
948 int retval, i;
949
950 if (len % 2) {
951 printk(KERN_ERR "MOXA: bios length is not even\n");
952 return -EINVAL;
953 }
954
955 retval = moxa_real_load_code(brd, ptr, len); /* may change numPorts */
956 if (retval)
957 return retval;
958
959 switch (brd->boardType) {
960 case MOXA_BOARD_C218_ISA:
961 case MOXA_BOARD_C218_PCI:
962 case MOXA_BOARD_CP204J:
963 port = brd->ports;
964 for (i = 0; i < brd->numPorts; i++, port++) {
965 port->board = brd;
966 port->DCDState = 0;
967 port->tableAddr = baseAddr + Extern_table +
968 Extern_size * i;
969 ofsAddr = port->tableAddr;
970 writew(C218rx_mask, ofsAddr + RX_mask);
971 writew(C218tx_mask, ofsAddr + TX_mask);
972 writew(C218rx_spage + i * C218buf_pageno, ofsAddr + Page_rxb);
973 writew(readw(ofsAddr + Page_rxb) + C218rx_pageno, ofsAddr + EndPage_rxb);
974
975 writew(C218tx_spage + i * C218buf_pageno, ofsAddr + Page_txb);
976 writew(readw(ofsAddr + Page_txb) + C218tx_pageno, ofsAddr + EndPage_txb);
977
978 }
979 break;
980 default:
981 port = brd->ports;
982 for (i = 0; i < brd->numPorts; i++, port++) {
983 port->board = brd;
984 port->DCDState = 0;
985 port->tableAddr = baseAddr + Extern_table +
986 Extern_size * i;
987 ofsAddr = port->tableAddr;
988 switch (brd->numPorts) {
989 case 8:
990 writew(C320p8rx_mask, ofsAddr + RX_mask);
991 writew(C320p8tx_mask, ofsAddr + TX_mask);
992 writew(C320p8rx_spage + i * C320p8buf_pgno, ofsAddr + Page_rxb);
993 writew(readw(ofsAddr + Page_rxb) + C320p8rx_pgno, ofsAddr + EndPage_rxb);
994 writew(C320p8tx_spage + i * C320p8buf_pgno, ofsAddr + Page_txb);
995 writew(readw(ofsAddr + Page_txb) + C320p8tx_pgno, ofsAddr + EndPage_txb);
996
997 break;
998 case 16:
999 writew(C320p16rx_mask, ofsAddr + RX_mask);
1000 writew(C320p16tx_mask, ofsAddr + TX_mask);
1001 writew(C320p16rx_spage + i * C320p16buf_pgno, ofsAddr + Page_rxb);
1002 writew(readw(ofsAddr + Page_rxb) + C320p16rx_pgno, ofsAddr + EndPage_rxb);
1003 writew(C320p16tx_spage + i * C320p16buf_pgno, ofsAddr + Page_txb);
1004 writew(readw(ofsAddr + Page_txb) + C320p16tx_pgno, ofsAddr + EndPage_txb);
1005 break;
1006
1007 case 24:
1008 writew(C320p24rx_mask, ofsAddr + RX_mask);
1009 writew(C320p24tx_mask, ofsAddr + TX_mask);
1010 writew(C320p24rx_spage + i * C320p24buf_pgno, ofsAddr + Page_rxb);
1011 writew(readw(ofsAddr + Page_rxb) + C320p24rx_pgno, ofsAddr + EndPage_rxb);
1012 writew(C320p24tx_spage + i * C320p24buf_pgno, ofsAddr + Page_txb);
1013 writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
1014 break;
1015 case 32:
1016 writew(C320p32rx_mask, ofsAddr + RX_mask);
1017 writew(C320p32tx_mask, ofsAddr + TX_mask);
1018 writew(C320p32tx_ofs, ofsAddr + Ofs_txb);
1019 writew(C320p32rx_spage + i * C320p32buf_pgno, ofsAddr + Page_rxb);
1020 writew(readb(ofsAddr + Page_rxb), ofsAddr + EndPage_rxb);
1021 writew(C320p32tx_spage + i * C320p32buf_pgno, ofsAddr + Page_txb);
1022 writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
1023 break;
1024 }
1025 }
1026 break;
1027 }
1028 return 0;
1029 }
1030
moxa_load_fw(struct moxa_board_conf * brd,const struct firmware * fw)1031 static int moxa_load_fw(struct moxa_board_conf *brd, const struct firmware *fw)
1032 {
1033 const void *ptr = fw->data;
1034 char rsn[64];
1035 u16 lens[5];
1036 size_t len;
1037 unsigned int a, lenp, lencnt;
1038 int ret = -EINVAL;
1039 struct {
1040 __le32 magic; /* 0x34303430 */
1041 u8 reserved1[2];
1042 u8 type; /* UNIX = 3 */
1043 u8 model; /* C218T=1, C320T=2, CP204=3 */
1044 u8 reserved2[8];
1045 __le16 len[5];
1046 } const *hdr = ptr;
1047
1048 BUILD_BUG_ON(ARRAY_SIZE(hdr->len) != ARRAY_SIZE(lens));
1049
1050 if (fw->size < MOXA_FW_HDRLEN) {
1051 strcpy(rsn, "too short (even header won't fit)");
1052 goto err;
1053 }
1054 if (hdr->magic != cpu_to_le32(0x30343034)) {
1055 sprintf(rsn, "bad magic: %.8x", le32_to_cpu(hdr->magic));
1056 goto err;
1057 }
1058 if (hdr->type != 3) {
1059 sprintf(rsn, "not for linux, type is %u", hdr->type);
1060 goto err;
1061 }
1062 if (moxa_check_fw_model(brd, hdr->model)) {
1063 sprintf(rsn, "not for this card, model is %u", hdr->model);
1064 goto err;
1065 }
1066
1067 len = MOXA_FW_HDRLEN;
1068 lencnt = hdr->model == 2 ? 5 : 3;
1069 for (a = 0; a < ARRAY_SIZE(lens); a++) {
1070 lens[a] = le16_to_cpu(hdr->len[a]);
1071 if (lens[a] && len + lens[a] <= fw->size &&
1072 moxa_check_fw(&fw->data[len]))
1073 printk(KERN_WARNING "MOXA firmware: unexpected input "
1074 "at offset %u, but going on\n", (u32)len);
1075 if (!lens[a] && a < lencnt) {
1076 sprintf(rsn, "too few entries in fw file");
1077 goto err;
1078 }
1079 len += lens[a];
1080 }
1081
1082 if (len != fw->size) {
1083 sprintf(rsn, "bad length: %u (should be %u)", (u32)fw->size,
1084 (u32)len);
1085 goto err;
1086 }
1087
1088 ptr += MOXA_FW_HDRLEN;
1089 lenp = 0; /* bios */
1090
1091 strcpy(rsn, "read above");
1092
1093 ret = moxa_load_bios(brd, ptr, lens[lenp]);
1094 if (ret)
1095 goto err;
1096
1097 /* we skip the tty section (lens[1]), since we don't need it */
1098 ptr += lens[lenp] + lens[lenp + 1];
1099 lenp += 2; /* comm */
1100
1101 if (hdr->model == 2) {
1102 ret = moxa_load_320b(brd, ptr, lens[lenp]);
1103 if (ret)
1104 goto err;
1105 /* skip another tty */
1106 ptr += lens[lenp] + lens[lenp + 1];
1107 lenp += 2;
1108 }
1109
1110 ret = moxa_load_code(brd, ptr, lens[lenp]);
1111 if (ret)
1112 goto err;
1113
1114 return 0;
1115 err:
1116 printk(KERN_ERR "firmware failed to load, reason: %s\n", rsn);
1117 return ret;
1118 }
1119
moxa_init_board(struct moxa_board_conf * brd,struct device * dev)1120 static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev)
1121 {
1122 const struct firmware *fw;
1123 const char *file;
1124 struct moxa_port *p;
1125 unsigned int i, first_idx;
1126 int ret;
1127
1128 brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports),
1129 GFP_KERNEL);
1130 if (brd->ports == NULL) {
1131 printk(KERN_ERR "cannot allocate memory for ports\n");
1132 ret = -ENOMEM;
1133 goto err;
1134 }
1135
1136 for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) {
1137 tty_port_init(&p->port);
1138 p->port.ops = &moxa_port_ops;
1139 p->type = PORT_16550A;
1140 p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
1141 }
1142
1143 switch (brd->boardType) {
1144 case MOXA_BOARD_C218_ISA:
1145 case MOXA_BOARD_C218_PCI:
1146 file = "c218tunx.cod";
1147 break;
1148 case MOXA_BOARD_CP204J:
1149 file = "cp204unx.cod";
1150 break;
1151 default:
1152 file = "c320tunx.cod";
1153 break;
1154 }
1155
1156 ret = request_firmware(&fw, file, dev);
1157 if (ret) {
1158 printk(KERN_ERR "MOXA: request_firmware failed. Make sure "
1159 "you've placed '%s' file into your firmware "
1160 "loader directory (e.g. /lib/firmware)\n",
1161 file);
1162 goto err_free;
1163 }
1164
1165 ret = moxa_load_fw(brd, fw);
1166
1167 release_firmware(fw);
1168
1169 if (ret)
1170 goto err_free;
1171
1172 spin_lock_bh(&moxa_lock);
1173 brd->ready = 1;
1174 if (!timer_pending(&moxaTimer))
1175 mod_timer(&moxaTimer, jiffies + HZ / 50);
1176 spin_unlock_bh(&moxa_lock);
1177
1178 first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
1179 for (i = 0; i < brd->numPorts; i++)
1180 tty_port_register_device(&brd->ports[i].port, moxaDriver,
1181 first_idx + i, dev);
1182
1183 return 0;
1184 err_free:
1185 for (i = 0; i < MAX_PORTS_PER_BOARD; i++)
1186 tty_port_destroy(&brd->ports[i].port);
1187 kfree(brd->ports);
1188 err:
1189 return ret;
1190 }
1191
moxa_board_deinit(struct moxa_board_conf * brd)1192 static void moxa_board_deinit(struct moxa_board_conf *brd)
1193 {
1194 unsigned int a, opened, first_idx;
1195
1196 mutex_lock(&moxa_openlock);
1197 spin_lock_bh(&moxa_lock);
1198 brd->ready = 0;
1199 spin_unlock_bh(&moxa_lock);
1200
1201 /* pci hot-un-plug support */
1202 for (a = 0; a < brd->numPorts; a++)
1203 if (tty_port_initialized(&brd->ports[a].port))
1204 tty_port_tty_hangup(&brd->ports[a].port, false);
1205
1206 for (a = 0; a < MAX_PORTS_PER_BOARD; a++)
1207 tty_port_destroy(&brd->ports[a].port);
1208
1209 while (1) {
1210 opened = 0;
1211 for (a = 0; a < brd->numPorts; a++)
1212 if (tty_port_initialized(&brd->ports[a].port))
1213 opened++;
1214 mutex_unlock(&moxa_openlock);
1215 if (!opened)
1216 break;
1217 msleep(50);
1218 mutex_lock(&moxa_openlock);
1219 }
1220
1221 first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
1222 for (a = 0; a < brd->numPorts; a++)
1223 tty_unregister_device(moxaDriver, first_idx + a);
1224
1225 iounmap(brd->basemem);
1226 brd->basemem = NULL;
1227 kfree(brd->ports);
1228 }
1229
1230 #ifdef CONFIG_PCI
moxa_pci_probe(struct pci_dev * pdev,const struct pci_device_id * ent)1231 static int moxa_pci_probe(struct pci_dev *pdev,
1232 const struct pci_device_id *ent)
1233 {
1234 struct moxa_board_conf *board;
1235 unsigned int i;
1236 int board_type = ent->driver_data;
1237 int retval;
1238
1239 retval = pci_enable_device(pdev);
1240 if (retval) {
1241 dev_err(&pdev->dev, "can't enable pci device\n");
1242 goto err;
1243 }
1244
1245 for (i = 0; i < MAX_BOARDS; i++)
1246 if (moxa_boards[i].basemem == NULL)
1247 break;
1248
1249 retval = -ENODEV;
1250 if (i >= MAX_BOARDS) {
1251 dev_warn(&pdev->dev, "more than %u MOXA Intellio family boards "
1252 "found. Board is ignored.\n", MAX_BOARDS);
1253 goto err;
1254 }
1255
1256 board = &moxa_boards[i];
1257
1258 retval = pci_request_region(pdev, 2, "moxa-base");
1259 if (retval) {
1260 dev_err(&pdev->dev, "can't request pci region 2\n");
1261 goto err;
1262 }
1263
1264 board->basemem = ioremap(pci_resource_start(pdev, 2), 0x4000);
1265 if (board->basemem == NULL) {
1266 dev_err(&pdev->dev, "can't remap io space 2\n");
1267 retval = -ENOMEM;
1268 goto err_reg;
1269 }
1270
1271 board->boardType = board_type;
1272 switch (board_type) {
1273 case MOXA_BOARD_C218_ISA:
1274 case MOXA_BOARD_C218_PCI:
1275 board->numPorts = 8;
1276 break;
1277
1278 case MOXA_BOARD_CP204J:
1279 board->numPorts = 4;
1280 break;
1281 default:
1282 board->numPorts = 0;
1283 break;
1284 }
1285 board->busType = MOXA_BUS_TYPE_PCI;
1286
1287 retval = moxa_init_board(board, &pdev->dev);
1288 if (retval)
1289 goto err_base;
1290
1291 pci_set_drvdata(pdev, board);
1292
1293 dev_info(&pdev->dev, "board '%s' ready (%u ports, firmware loaded)\n",
1294 moxa_brdname[board_type - 1], board->numPorts);
1295
1296 return 0;
1297 err_base:
1298 iounmap(board->basemem);
1299 board->basemem = NULL;
1300 err_reg:
1301 pci_release_region(pdev, 2);
1302 err:
1303 return retval;
1304 }
1305
moxa_pci_remove(struct pci_dev * pdev)1306 static void moxa_pci_remove(struct pci_dev *pdev)
1307 {
1308 struct moxa_board_conf *brd = pci_get_drvdata(pdev);
1309
1310 moxa_board_deinit(brd);
1311
1312 pci_release_region(pdev, 2);
1313 }
1314
1315 static struct pci_driver moxa_pci_driver = {
1316 .name = "moxa",
1317 .id_table = moxa_pcibrds,
1318 .probe = moxa_pci_probe,
1319 .remove = moxa_pci_remove
1320 };
1321 #endif /* CONFIG_PCI */
1322
moxa_init(void)1323 static int __init moxa_init(void)
1324 {
1325 unsigned int isabrds = 0;
1326 int retval = 0;
1327 struct moxa_board_conf *brd = moxa_boards;
1328 unsigned int i;
1329
1330 printk(KERN_INFO "MOXA Intellio family driver version %s\n",
1331 MOXA_VERSION);
1332
1333 tty_port_init(&moxa_service_port);
1334
1335 moxaDriver = tty_alloc_driver(MAX_PORTS + 1,
1336 TTY_DRIVER_REAL_RAW |
1337 TTY_DRIVER_DYNAMIC_DEV);
1338 if (IS_ERR(moxaDriver))
1339 return PTR_ERR(moxaDriver);
1340
1341 moxaDriver->name = "ttyMX";
1342 moxaDriver->major = ttymajor;
1343 moxaDriver->minor_start = 0;
1344 moxaDriver->type = TTY_DRIVER_TYPE_SERIAL;
1345 moxaDriver->subtype = SERIAL_TYPE_NORMAL;
1346 moxaDriver->init_termios = tty_std_termios;
1347 moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
1348 moxaDriver->init_termios.c_ispeed = 9600;
1349 moxaDriver->init_termios.c_ospeed = 9600;
1350 tty_set_operations(moxaDriver, &moxa_ops);
1351 /* Having one more port only for ioctls is ugly */
1352 tty_port_link_device(&moxa_service_port, moxaDriver, MAX_PORTS);
1353
1354 if (tty_register_driver(moxaDriver)) {
1355 printk(KERN_ERR "can't register MOXA Smartio tty driver!\n");
1356 tty_driver_kref_put(moxaDriver);
1357 return -1;
1358 }
1359
1360 /* Find the boards defined from module args. */
1361
1362 for (i = 0; i < MAX_BOARDS; i++) {
1363 if (!baseaddr[i])
1364 break;
1365 if (type[i] == MOXA_BOARD_C218_ISA ||
1366 type[i] == MOXA_BOARD_C320_ISA) {
1367 pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n",
1368 isabrds + 1, moxa_brdname[type[i] - 1],
1369 baseaddr[i]);
1370 brd->boardType = type[i];
1371 brd->numPorts = type[i] == MOXA_BOARD_C218_ISA ? 8 :
1372 numports[i];
1373 brd->busType = MOXA_BUS_TYPE_ISA;
1374 brd->basemem = ioremap(baseaddr[i], 0x4000);
1375 if (!brd->basemem) {
1376 printk(KERN_ERR "MOXA: can't remap %lx\n",
1377 baseaddr[i]);
1378 continue;
1379 }
1380 if (moxa_init_board(brd, NULL)) {
1381 iounmap(brd->basemem);
1382 brd->basemem = NULL;
1383 continue;
1384 }
1385
1386 printk(KERN_INFO "MOXA isa board found at 0x%.8lx and "
1387 "ready (%u ports, firmware loaded)\n",
1388 baseaddr[i], brd->numPorts);
1389
1390 brd++;
1391 isabrds++;
1392 }
1393 }
1394
1395 #ifdef CONFIG_PCI
1396 retval = pci_register_driver(&moxa_pci_driver);
1397 if (retval) {
1398 printk(KERN_ERR "Can't register MOXA pci driver!\n");
1399 if (isabrds)
1400 retval = 0;
1401 }
1402 #endif
1403
1404 return retval;
1405 }
1406
moxa_exit(void)1407 static void __exit moxa_exit(void)
1408 {
1409 unsigned int i;
1410
1411 #ifdef CONFIG_PCI
1412 pci_unregister_driver(&moxa_pci_driver);
1413 #endif
1414
1415 for (i = 0; i < MAX_BOARDS; i++) /* ISA boards */
1416 if (moxa_boards[i].ready)
1417 moxa_board_deinit(&moxa_boards[i]);
1418
1419 del_timer_sync(&moxaTimer);
1420
1421 tty_unregister_driver(moxaDriver);
1422 tty_driver_kref_put(moxaDriver);
1423 }
1424
1425 module_init(moxa_init);
1426 module_exit(moxa_exit);
1427
moxa_shutdown(struct tty_port * port)1428 static void moxa_shutdown(struct tty_port *port)
1429 {
1430 struct moxa_port *ch = container_of(port, struct moxa_port, port);
1431 MoxaPortDisable(ch);
1432 MoxaPortFlushData(ch, 2);
1433 }
1434
moxa_carrier_raised(struct tty_port * port)1435 static bool moxa_carrier_raised(struct tty_port *port)
1436 {
1437 struct moxa_port *ch = container_of(port, struct moxa_port, port);
1438 int dcd;
1439
1440 spin_lock_irq(&port->lock);
1441 dcd = ch->DCDState;
1442 spin_unlock_irq(&port->lock);
1443 return dcd;
1444 }
1445
moxa_dtr_rts(struct tty_port * port,bool active)1446 static void moxa_dtr_rts(struct tty_port *port, bool active)
1447 {
1448 struct moxa_port *ch = container_of(port, struct moxa_port, port);
1449 MoxaPortLineCtrl(ch, active, active);
1450 }
1451
1452
moxa_open(struct tty_struct * tty,struct file * filp)1453 static int moxa_open(struct tty_struct *tty, struct file *filp)
1454 {
1455 struct moxa_board_conf *brd;
1456 struct moxa_port *ch;
1457 int port;
1458
1459 port = tty->index;
1460 if (port == MAX_PORTS) {
1461 return capable(CAP_SYS_ADMIN) ? 0 : -EPERM;
1462 }
1463 if (mutex_lock_interruptible(&moxa_openlock))
1464 return -ERESTARTSYS;
1465 brd = &moxa_boards[port / MAX_PORTS_PER_BOARD];
1466 if (!brd->ready) {
1467 mutex_unlock(&moxa_openlock);
1468 return -ENODEV;
1469 }
1470
1471 if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) {
1472 mutex_unlock(&moxa_openlock);
1473 return -ENODEV;
1474 }
1475
1476 ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
1477 ch->port.count++;
1478 tty->driver_data = ch;
1479 tty_port_tty_set(&ch->port, tty);
1480 mutex_lock(&ch->port.mutex);
1481 if (!tty_port_initialized(&ch->port)) {
1482 ch->statusflags = 0;
1483 moxa_set_tty_param(tty, &tty->termios);
1484 MoxaPortLineCtrl(ch, true, true);
1485 MoxaPortEnable(ch);
1486 MoxaSetFifo(ch, ch->type == PORT_16550A);
1487 tty_port_set_initialized(&ch->port, true);
1488 }
1489 mutex_unlock(&ch->port.mutex);
1490 mutex_unlock(&moxa_openlock);
1491
1492 return tty_port_block_til_ready(&ch->port, tty, filp);
1493 }
1494
moxa_close(struct tty_struct * tty,struct file * filp)1495 static void moxa_close(struct tty_struct *tty, struct file *filp)
1496 {
1497 struct moxa_port *ch = tty->driver_data;
1498 ch->cflag = tty->termios.c_cflag;
1499 tty_port_close(&ch->port, tty, filp);
1500 }
1501
moxa_write(struct tty_struct * tty,const u8 * buf,size_t count)1502 static ssize_t moxa_write(struct tty_struct *tty, const u8 *buf, size_t count)
1503 {
1504 struct moxa_port *ch = tty->driver_data;
1505 unsigned long flags;
1506 int len;
1507
1508 if (ch == NULL)
1509 return 0;
1510
1511 spin_lock_irqsave(&moxa_lock, flags);
1512 len = MoxaPortWriteData(tty, buf, count);
1513 spin_unlock_irqrestore(&moxa_lock, flags);
1514
1515 set_bit(LOWWAIT, &ch->statusflags);
1516 return len;
1517 }
1518
moxa_write_room(struct tty_struct * tty)1519 static unsigned int moxa_write_room(struct tty_struct *tty)
1520 {
1521 struct moxa_port *ch;
1522
1523 if (tty->flow.stopped)
1524 return 0;
1525 ch = tty->driver_data;
1526 if (ch == NULL)
1527 return 0;
1528 return MoxaPortTxFree(ch);
1529 }
1530
moxa_flush_buffer(struct tty_struct * tty)1531 static void moxa_flush_buffer(struct tty_struct *tty)
1532 {
1533 struct moxa_port *ch = tty->driver_data;
1534
1535 if (ch == NULL)
1536 return;
1537 MoxaPortFlushData(ch, 1);
1538 tty_wakeup(tty);
1539 }
1540
moxa_chars_in_buffer(struct tty_struct * tty)1541 static unsigned int moxa_chars_in_buffer(struct tty_struct *tty)
1542 {
1543 struct moxa_port *ch = tty->driver_data;
1544 unsigned int chars;
1545
1546 chars = MoxaPortTxQueue(ch);
1547 if (chars)
1548 /*
1549 * Make it possible to wakeup anything waiting for output
1550 * in tty_ioctl.c, etc.
1551 */
1552 set_bit(EMPTYWAIT, &ch->statusflags);
1553 return chars;
1554 }
1555
moxa_tiocmget(struct tty_struct * tty)1556 static int moxa_tiocmget(struct tty_struct *tty)
1557 {
1558 struct moxa_port *ch = tty->driver_data;
1559 bool dtr_active, rts_active;
1560 int flag = 0;
1561 int status;
1562
1563 MoxaPortGetLineOut(ch, &dtr_active, &rts_active);
1564 if (dtr_active)
1565 flag |= TIOCM_DTR;
1566 if (rts_active)
1567 flag |= TIOCM_RTS;
1568 status = MoxaPortLineStatus(ch);
1569 if (status & 1)
1570 flag |= TIOCM_CTS;
1571 if (status & 2)
1572 flag |= TIOCM_DSR;
1573 if (status & 4)
1574 flag |= TIOCM_CD;
1575 return flag;
1576 }
1577
moxa_tiocmset(struct tty_struct * tty,unsigned int set,unsigned int clear)1578 static int moxa_tiocmset(struct tty_struct *tty,
1579 unsigned int set, unsigned int clear)
1580 {
1581 bool dtr_active, rts_active;
1582 struct moxa_port *ch;
1583
1584 mutex_lock(&moxa_openlock);
1585 ch = tty->driver_data;
1586 if (!ch) {
1587 mutex_unlock(&moxa_openlock);
1588 return -EINVAL;
1589 }
1590
1591 MoxaPortGetLineOut(ch, &dtr_active, &rts_active);
1592 if (set & TIOCM_RTS)
1593 rts_active = true;
1594 if (set & TIOCM_DTR)
1595 dtr_active = true;
1596 if (clear & TIOCM_RTS)
1597 rts_active = false;
1598 if (clear & TIOCM_DTR)
1599 dtr_active = false;
1600 MoxaPortLineCtrl(ch, dtr_active, rts_active);
1601 mutex_unlock(&moxa_openlock);
1602 return 0;
1603 }
1604
moxa_set_termios(struct tty_struct * tty,const struct ktermios * old_termios)1605 static void moxa_set_termios(struct tty_struct *tty,
1606 const struct ktermios *old_termios)
1607 {
1608 struct moxa_port *ch = tty->driver_data;
1609
1610 if (ch == NULL)
1611 return;
1612 moxa_set_tty_param(tty, old_termios);
1613 if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty))
1614 wake_up_interruptible(&ch->port.open_wait);
1615 }
1616
moxa_stop(struct tty_struct * tty)1617 static void moxa_stop(struct tty_struct *tty)
1618 {
1619 struct moxa_port *ch = tty->driver_data;
1620
1621 if (ch == NULL)
1622 return;
1623 MoxaPortTxDisable(ch);
1624 set_bit(TXSTOPPED, &ch->statusflags);
1625 }
1626
1627
moxa_start(struct tty_struct * tty)1628 static void moxa_start(struct tty_struct *tty)
1629 {
1630 struct moxa_port *ch = tty->driver_data;
1631
1632 if (ch == NULL)
1633 return;
1634
1635 if (!test_bit(TXSTOPPED, &ch->statusflags))
1636 return;
1637
1638 MoxaPortTxEnable(ch);
1639 clear_bit(TXSTOPPED, &ch->statusflags);
1640 }
1641
moxa_hangup(struct tty_struct * tty)1642 static void moxa_hangup(struct tty_struct *tty)
1643 {
1644 struct moxa_port *ch = tty->driver_data;
1645 tty_port_hangup(&ch->port);
1646 }
1647
moxa_new_dcdstate(struct moxa_port * p,u8 dcd)1648 static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
1649 {
1650 unsigned long flags;
1651 dcd = !!dcd;
1652
1653 spin_lock_irqsave(&p->port.lock, flags);
1654 if (dcd != p->DCDState) {
1655 p->DCDState = dcd;
1656 spin_unlock_irqrestore(&p->port.lock, flags);
1657 if (!dcd)
1658 tty_port_tty_hangup(&p->port, true);
1659 }
1660 else
1661 spin_unlock_irqrestore(&p->port.lock, flags);
1662 }
1663
moxa_poll_port(struct moxa_port * p,unsigned int handle,u16 __iomem * ip)1664 static int moxa_poll_port(struct moxa_port *p, unsigned int handle,
1665 u16 __iomem *ip)
1666 {
1667 struct tty_struct *tty = tty_port_tty_get(&p->port);
1668 bool inited = tty_port_initialized(&p->port);
1669 void __iomem *ofsAddr;
1670 u16 intr;
1671
1672 if (tty) {
1673 if (test_bit(EMPTYWAIT, &p->statusflags) &&
1674 MoxaPortTxQueue(p) == 0) {
1675 clear_bit(EMPTYWAIT, &p->statusflags);
1676 tty_wakeup(tty);
1677 }
1678 if (test_bit(LOWWAIT, &p->statusflags) && !tty->flow.stopped &&
1679 MoxaPortTxQueue(p) <= WAKEUP_CHARS) {
1680 clear_bit(LOWWAIT, &p->statusflags);
1681 tty_wakeup(tty);
1682 }
1683
1684 if (inited && !tty_throttled(tty) &&
1685 MoxaPortRxQueue(p) > 0) { /* RX */
1686 MoxaPortReadData(p);
1687 tty_flip_buffer_push(&p->port);
1688 }
1689 } else {
1690 clear_bit(EMPTYWAIT, &p->statusflags);
1691 MoxaPortFlushData(p, 0); /* flush RX */
1692 }
1693
1694 if (!handle) /* nothing else to do */
1695 goto put;
1696
1697 intr = readw(ip); /* port irq status */
1698 if (intr == 0)
1699 goto put;
1700
1701 writew(0, ip); /* ACK port */
1702 ofsAddr = p->tableAddr;
1703 if (intr & IntrTx) /* disable tx intr */
1704 writew(readw(ofsAddr + HostStat) & ~WakeupTx,
1705 ofsAddr + HostStat);
1706
1707 if (!inited)
1708 goto put;
1709
1710 if (tty && (intr & IntrBreak) && !I_IGNBRK(tty)) { /* BREAK */
1711 tty_insert_flip_char(&p->port, 0, TTY_BREAK);
1712 tty_flip_buffer_push(&p->port);
1713 }
1714
1715 if (intr & IntrLine)
1716 moxa_new_dcdstate(p, readb(ofsAddr + FlagStat) & DCD_state);
1717 put:
1718 tty_kref_put(tty);
1719
1720 return 0;
1721 }
1722
moxa_poll(struct timer_list * unused)1723 static void moxa_poll(struct timer_list *unused)
1724 {
1725 struct moxa_board_conf *brd;
1726 u16 __iomem *ip;
1727 unsigned int card, port, served = 0;
1728
1729 spin_lock(&moxa_lock);
1730 for (card = 0; card < MAX_BOARDS; card++) {
1731 brd = &moxa_boards[card];
1732 if (!brd->ready)
1733 continue;
1734
1735 served++;
1736
1737 ip = NULL;
1738 if (readb(brd->intPend) == 0xff)
1739 ip = brd->intTable + readb(brd->intNdx);
1740
1741 for (port = 0; port < brd->numPorts; port++)
1742 moxa_poll_port(&brd->ports[port], !!ip, ip + port);
1743
1744 if (ip)
1745 writeb(0, brd->intPend); /* ACK */
1746
1747 if (moxaLowWaterChk) {
1748 struct moxa_port *p = brd->ports;
1749 for (port = 0; port < brd->numPorts; port++, p++)
1750 if (p->lowChkFlag) {
1751 p->lowChkFlag = 0;
1752 moxa_low_water_check(p->tableAddr);
1753 }
1754 }
1755 }
1756 moxaLowWaterChk = 0;
1757
1758 if (served)
1759 mod_timer(&moxaTimer, jiffies + HZ / 50);
1760 spin_unlock(&moxa_lock);
1761 }
1762
1763 /******************************************************************************/
1764
moxa_set_tty_param(struct tty_struct * tty,const struct ktermios * old_termios)1765 static void moxa_set_tty_param(struct tty_struct *tty,
1766 const struct ktermios *old_termios)
1767 {
1768 register struct ktermios *ts = &tty->termios;
1769 struct moxa_port *ch = tty->driver_data;
1770 int rts, cts, txflow, rxflow, xany, baud;
1771
1772 rts = cts = txflow = rxflow = xany = 0;
1773 if (ts->c_cflag & CRTSCTS)
1774 rts = cts = 1;
1775 if (ts->c_iflag & IXON)
1776 txflow = 1;
1777 if (ts->c_iflag & IXOFF)
1778 rxflow = 1;
1779 if (ts->c_iflag & IXANY)
1780 xany = 1;
1781
1782 MoxaPortFlowCtrl(ch, rts, cts, txflow, rxflow, xany);
1783 baud = MoxaPortSetTermio(ch, ts, tty_get_baud_rate(tty));
1784 if (baud == -1)
1785 baud = tty_termios_baud_rate(old_termios);
1786 /* Not put the baud rate into the termios data */
1787 tty_encode_baud_rate(tty, baud, baud);
1788 }
1789
1790 /*****************************************************************************
1791 * Driver level functions: *
1792 *****************************************************************************/
1793
MoxaPortFlushData(struct moxa_port * port,int mode)1794 static void MoxaPortFlushData(struct moxa_port *port, int mode)
1795 {
1796 void __iomem *ofsAddr;
1797 if (mode < 0 || mode > 2)
1798 return;
1799 ofsAddr = port->tableAddr;
1800 moxafunc(ofsAddr, FC_FlushQueue, mode);
1801 if (mode != 1) {
1802 port->lowChkFlag = 0;
1803 moxa_low_water_check(ofsAddr);
1804 }
1805 }
1806
1807 /*
1808 * Moxa Port Number Description:
1809 *
1810 * MOXA serial driver supports up to 4 MOXA-C218/C320 boards. And,
1811 * the port number using in MOXA driver functions will be 0 to 31 for
1812 * first MOXA board, 32 to 63 for second, 64 to 95 for third and 96
1813 * to 127 for fourth. For example, if you setup three MOXA boards,
1814 * first board is C218, second board is C320-16 and third board is
1815 * C320-32. The port number of first board (C218 - 8 ports) is from
1816 * 0 to 7. The port number of second board (C320 - 16 ports) is form
1817 * 32 to 47. The port number of third board (C320 - 32 ports) is from
1818 * 64 to 95. And those port numbers form 8 to 31, 48 to 63 and 96 to
1819 * 127 will be invalid.
1820 *
1821 *
1822 * Moxa Functions Description:
1823 *
1824 * Function 1: Driver initialization routine, this routine must be
1825 * called when initialized driver.
1826 * Syntax:
1827 * void MoxaDriverInit();
1828 *
1829 *
1830 * Function 2: Moxa driver private IOCTL command processing.
1831 * Syntax:
1832 * int MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port);
1833 *
1834 * unsigned int cmd : IOCTL command
1835 * unsigned long arg : IOCTL argument
1836 * int port : port number (0 - 127)
1837 *
1838 * return: 0 (OK)
1839 * -EINVAL
1840 * -ENOIOCTLCMD
1841 *
1842 *
1843 * Function 6: Enable this port to start Tx/Rx data.
1844 * Syntax:
1845 * void MoxaPortEnable(int port);
1846 * int port : port number (0 - 127)
1847 *
1848 *
1849 * Function 7: Disable this port
1850 * Syntax:
1851 * void MoxaPortDisable(int port);
1852 * int port : port number (0 - 127)
1853 *
1854 *
1855 * Function 10: Setting baud rate of this port.
1856 * Syntax:
1857 * speed_t MoxaPortSetBaud(int port, speed_t baud);
1858 * int port : port number (0 - 127)
1859 * long baud : baud rate (50 - 115200)
1860 *
1861 * return: 0 : this port is invalid or baud < 50
1862 * 50 - 115200 : the real baud rate set to the port, if
1863 * the argument baud is large than maximun
1864 * available baud rate, the real setting
1865 * baud rate will be the maximun baud rate.
1866 *
1867 *
1868 * Function 12: Configure the port.
1869 * Syntax:
1870 * int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud);
1871 * int port : port number (0 - 127)
1872 * struct ktermios * termio : termio structure pointer
1873 * speed_t baud : baud rate
1874 *
1875 * return: -1 : this port is invalid or termio == NULL
1876 * 0 : setting O.K.
1877 *
1878 *
1879 * Function 13: Get the DTR/RTS state of this port.
1880 * Syntax:
1881 * int MoxaPortGetLineOut(int port, bool *dtrState, bool *rtsState);
1882 * int port : port number (0 - 127)
1883 * bool * dtr_active : pointer to bool to receive the current DTR
1884 * state. (if NULL, this function will not
1885 * write to this address)
1886 * bool * rts_active : pointer to bool to receive the current RTS
1887 * state. (if NULL, this function will not
1888 * write to this address)
1889 *
1890 * return: -1 : this port is invalid
1891 * 0 : O.K.
1892 *
1893 *
1894 * Function 14: Setting the DTR/RTS output state of this port.
1895 * Syntax:
1896 * void MoxaPortLineCtrl(int port, bool dtrState, bool rtsState);
1897 * int port : port number (0 - 127)
1898 * bool dtr_active : DTR output state
1899 * bool rts_active : RTS output state
1900 *
1901 *
1902 * Function 15: Setting the flow control of this port.
1903 * Syntax:
1904 * void MoxaPortFlowCtrl(int port, int rtsFlow, int ctsFlow, int rxFlow,
1905 * int txFlow,int xany);
1906 * int port : port number (0 - 127)
1907 * int rtsFlow : H/W RTS flow control (0: no, 1: yes)
1908 * int ctsFlow : H/W CTS flow control (0: no, 1: yes)
1909 * int rxFlow : S/W Rx XON/XOFF flow control (0: no, 1: yes)
1910 * int txFlow : S/W Tx XON/XOFF flow control (0: no, 1: yes)
1911 * int xany : S/W XANY flow control (0: no, 1: yes)
1912 *
1913 *
1914 * Function 16: Get ths line status of this port
1915 * Syntax:
1916 * int MoxaPortLineStatus(int port);
1917 * int port : port number (0 - 127)
1918 *
1919 * return: Bit 0 - CTS state (0: off, 1: on)
1920 * Bit 1 - DSR state (0: off, 1: on)
1921 * Bit 2 - DCD state (0: off, 1: on)
1922 *
1923 *
1924 * Function 19: Flush the Rx/Tx buffer data of this port.
1925 * Syntax:
1926 * void MoxaPortFlushData(int port, int mode);
1927 * int port : port number (0 - 127)
1928 * int mode
1929 * 0 : flush the Rx buffer
1930 * 1 : flush the Tx buffer
1931 * 2 : flush the Rx and Tx buffer
1932 *
1933 *
1934 * Function 20: Write data.
1935 * Syntax:
1936 * int MoxaPortWriteData(int port, unsigned char * buffer, int length);
1937 * int port : port number (0 - 127)
1938 * unsigned char * buffer : pointer to write data buffer.
1939 * int length : write data length
1940 *
1941 * return: 0 - length : real write data length
1942 *
1943 *
1944 * Function 21: Read data.
1945 * Syntax:
1946 * int MoxaPortReadData(int port, struct tty_struct *tty);
1947 * int port : port number (0 - 127)
1948 * struct tty_struct *tty : tty for data
1949 *
1950 * return: 0 - length : real read data length
1951 *
1952 *
1953 * Function 24: Get the Tx buffer current queued data bytes
1954 * Syntax:
1955 * int MoxaPortTxQueue(int port);
1956 * int port : port number (0 - 127)
1957 *
1958 * return: .. : Tx buffer current queued data bytes
1959 *
1960 *
1961 * Function 25: Get the Tx buffer current free space
1962 * Syntax:
1963 * int MoxaPortTxFree(int port);
1964 * int port : port number (0 - 127)
1965 *
1966 * return: .. : Tx buffer current free space
1967 *
1968 *
1969 * Function 26: Get the Rx buffer current queued data bytes
1970 * Syntax:
1971 * int MoxaPortRxQueue(int port);
1972 * int port : port number (0 - 127)
1973 *
1974 * return: .. : Rx buffer current queued data bytes
1975 *
1976 *
1977 * Function 28: Disable port data transmission.
1978 * Syntax:
1979 * void MoxaPortTxDisable(int port);
1980 * int port : port number (0 - 127)
1981 *
1982 *
1983 * Function 29: Enable port data transmission.
1984 * Syntax:
1985 * void MoxaPortTxEnable(int port);
1986 * int port : port number (0 - 127)
1987 *
1988 *
1989 * Function 31: Get the received BREAK signal count and reset it.
1990 * Syntax:
1991 * int MoxaPortResetBrkCnt(int port);
1992 * int port : port number (0 - 127)
1993 *
1994 * return: 0 - .. : BREAK signal count
1995 *
1996 *
1997 */
1998
MoxaPortEnable(struct moxa_port * port)1999 static void MoxaPortEnable(struct moxa_port *port)
2000 {
2001 void __iomem *ofsAddr;
2002 u16 lowwater = 512;
2003
2004 ofsAddr = port->tableAddr;
2005 writew(lowwater, ofsAddr + Low_water);
2006 if (MOXA_IS_320(port->board))
2007 moxafunc(ofsAddr, FC_SetBreakIrq, 0);
2008 else
2009 writew(readw(ofsAddr + HostStat) | WakeupBreak,
2010 ofsAddr + HostStat);
2011
2012 moxafunc(ofsAddr, FC_SetLineIrq, Magic_code);
2013 moxafunc(ofsAddr, FC_FlushQueue, 2);
2014
2015 moxafunc(ofsAddr, FC_EnableCH, Magic_code);
2016 MoxaPortLineStatus(port);
2017 }
2018
MoxaPortDisable(struct moxa_port * port)2019 static void MoxaPortDisable(struct moxa_port *port)
2020 {
2021 void __iomem *ofsAddr = port->tableAddr;
2022
2023 moxafunc(ofsAddr, FC_SetFlowCtl, 0); /* disable flow control */
2024 moxafunc(ofsAddr, FC_ClrLineIrq, Magic_code);
2025 writew(0, ofsAddr + HostStat);
2026 moxafunc(ofsAddr, FC_DisableCH, Magic_code);
2027 }
2028
MoxaPortSetBaud(struct moxa_port * port,speed_t baud)2029 static speed_t MoxaPortSetBaud(struct moxa_port *port, speed_t baud)
2030 {
2031 void __iomem *ofsAddr = port->tableAddr;
2032 unsigned int clock, val;
2033 speed_t max;
2034
2035 max = MOXA_IS_320(port->board) ? 460800 : 921600;
2036 if (baud < 50)
2037 return 0;
2038 if (baud > max)
2039 baud = max;
2040 clock = 921600;
2041 val = clock / baud;
2042 moxafunc(ofsAddr, FC_SetBaud, val);
2043 baud = clock / val;
2044 return baud;
2045 }
2046
MoxaPortSetTermio(struct moxa_port * port,struct ktermios * termio,speed_t baud)2047 static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio,
2048 speed_t baud)
2049 {
2050 void __iomem *ofsAddr;
2051 tcflag_t mode = 0;
2052
2053 ofsAddr = port->tableAddr;
2054
2055 mode = termio->c_cflag & CSIZE;
2056 if (mode == CS5)
2057 mode = MX_CS5;
2058 else if (mode == CS6)
2059 mode = MX_CS6;
2060 else if (mode == CS7)
2061 mode = MX_CS7;
2062 else if (mode == CS8)
2063 mode = MX_CS8;
2064
2065 if (termio->c_cflag & CSTOPB) {
2066 if (mode == MX_CS5)
2067 mode |= MX_STOP15;
2068 else
2069 mode |= MX_STOP2;
2070 } else
2071 mode |= MX_STOP1;
2072
2073 if (termio->c_cflag & PARENB) {
2074 if (termio->c_cflag & PARODD) {
2075 if (termio->c_cflag & CMSPAR)
2076 mode |= MX_PARMARK;
2077 else
2078 mode |= MX_PARODD;
2079 } else {
2080 if (termio->c_cflag & CMSPAR)
2081 mode |= MX_PARSPACE;
2082 else
2083 mode |= MX_PAREVEN;
2084 }
2085 } else
2086 mode |= MX_PARNONE;
2087
2088 moxafunc(ofsAddr, FC_SetDataMode, (u16)mode);
2089
2090 if (MOXA_IS_320(port->board) && baud >= 921600)
2091 return -1;
2092
2093 baud = MoxaPortSetBaud(port, baud);
2094
2095 if (termio->c_iflag & (IXON | IXOFF | IXANY)) {
2096 spin_lock_irq(&moxafunc_lock);
2097 writeb(termio->c_cc[VSTART], ofsAddr + FuncArg);
2098 writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1);
2099 writeb(FC_SetXonXoff, ofsAddr + FuncCode);
2100 moxa_wait_finish(ofsAddr);
2101 spin_unlock_irq(&moxafunc_lock);
2102
2103 }
2104 return baud;
2105 }
2106
MoxaPortGetLineOut(struct moxa_port * port,bool * dtr_active,bool * rts_active)2107 static int MoxaPortGetLineOut(struct moxa_port *port, bool *dtr_active,
2108 bool *rts_active)
2109 {
2110 if (dtr_active)
2111 *dtr_active = port->lineCtrl & DTR_ON;
2112 if (rts_active)
2113 *rts_active = port->lineCtrl & RTS_ON;
2114
2115 return 0;
2116 }
2117
MoxaPortLineCtrl(struct moxa_port * port,bool dtr_active,bool rts_active)2118 static void MoxaPortLineCtrl(struct moxa_port *port, bool dtr_active, bool rts_active)
2119 {
2120 u8 mode = 0;
2121
2122 if (dtr_active)
2123 mode |= DTR_ON;
2124 if (rts_active)
2125 mode |= RTS_ON;
2126 port->lineCtrl = mode;
2127 moxafunc(port->tableAddr, FC_LineControl, mode);
2128 }
2129
MoxaPortFlowCtrl(struct moxa_port * port,int rts,int cts,int txflow,int rxflow,int txany)2130 static void MoxaPortFlowCtrl(struct moxa_port *port, int rts, int cts,
2131 int txflow, int rxflow, int txany)
2132 {
2133 int mode = 0;
2134
2135 if (rts)
2136 mode |= RTS_FlowCtl;
2137 if (cts)
2138 mode |= CTS_FlowCtl;
2139 if (txflow)
2140 mode |= Tx_FlowCtl;
2141 if (rxflow)
2142 mode |= Rx_FlowCtl;
2143 if (txany)
2144 mode |= IXM_IXANY;
2145 moxafunc(port->tableAddr, FC_SetFlowCtl, mode);
2146 }
2147
MoxaPortLineStatus(struct moxa_port * port)2148 static int MoxaPortLineStatus(struct moxa_port *port)
2149 {
2150 void __iomem *ofsAddr;
2151 int val;
2152
2153 ofsAddr = port->tableAddr;
2154 if (MOXA_IS_320(port->board))
2155 val = moxafuncret(ofsAddr, FC_LineStatus, 0);
2156 else
2157 val = readw(ofsAddr + FlagStat) >> 4;
2158 val &= 0x0B;
2159 if (val & 8)
2160 val |= 4;
2161 moxa_new_dcdstate(port, val & 8);
2162 val &= 7;
2163 return val;
2164 }
2165
MoxaPortWriteData(struct tty_struct * tty,const u8 * buffer,int len)2166 static int MoxaPortWriteData(struct tty_struct *tty, const u8 *buffer, int len)
2167 {
2168 struct moxa_port *port = tty->driver_data;
2169 void __iomem *baseAddr, *ofsAddr, *ofs;
2170 unsigned int c, total;
2171 u16 head, tail, tx_mask, spage, epage;
2172 u16 pageno, pageofs, bufhead;
2173
2174 ofsAddr = port->tableAddr;
2175 baseAddr = port->board->basemem;
2176 tx_mask = readw(ofsAddr + TX_mask);
2177 spage = readw(ofsAddr + Page_txb);
2178 epage = readw(ofsAddr + EndPage_txb);
2179 tail = readw(ofsAddr + TXwptr);
2180 head = readw(ofsAddr + TXrptr);
2181 c = (head > tail) ? (head - tail - 1) : (head - tail + tx_mask);
2182 if (c > len)
2183 c = len;
2184 moxaLog.txcnt[port->port.tty->index] += c;
2185 total = c;
2186 if (spage == epage) {
2187 bufhead = readw(ofsAddr + Ofs_txb);
2188 writew(spage, baseAddr + Control_reg);
2189 while (c > 0) {
2190 if (head > tail)
2191 len = head - tail - 1;
2192 else
2193 len = tx_mask + 1 - tail;
2194 len = (c > len) ? len : c;
2195 ofs = baseAddr + DynPage_addr + bufhead + tail;
2196 memcpy_toio(ofs, buffer, len);
2197 buffer += len;
2198 tail = (tail + len) & tx_mask;
2199 c -= len;
2200 }
2201 } else {
2202 pageno = spage + (tail >> 13);
2203 pageofs = tail & Page_mask;
2204 while (c > 0) {
2205 len = Page_size - pageofs;
2206 if (len > c)
2207 len = c;
2208 writeb(pageno, baseAddr + Control_reg);
2209 ofs = baseAddr + DynPage_addr + pageofs;
2210 memcpy_toio(ofs, buffer, len);
2211 buffer += len;
2212 if (++pageno == epage)
2213 pageno = spage;
2214 pageofs = 0;
2215 c -= len;
2216 }
2217 tail = (tail + total) & tx_mask;
2218 }
2219 writew(tail, ofsAddr + TXwptr);
2220 writeb(1, ofsAddr + CD180TXirq); /* start to send */
2221 return total;
2222 }
2223
MoxaPortReadData(struct moxa_port * port)2224 static int MoxaPortReadData(struct moxa_port *port)
2225 {
2226 struct tty_struct *tty = port->port.tty;
2227 unsigned char *dst;
2228 void __iomem *baseAddr, *ofsAddr, *ofs;
2229 unsigned int count, len, total;
2230 u16 tail, rx_mask, spage, epage;
2231 u16 pageno, pageofs, bufhead, head;
2232
2233 ofsAddr = port->tableAddr;
2234 baseAddr = port->board->basemem;
2235 head = readw(ofsAddr + RXrptr);
2236 tail = readw(ofsAddr + RXwptr);
2237 rx_mask = readw(ofsAddr + RX_mask);
2238 spage = readw(ofsAddr + Page_rxb);
2239 epage = readw(ofsAddr + EndPage_rxb);
2240 count = (tail >= head) ? (tail - head) : (tail - head + rx_mask + 1);
2241 if (count == 0)
2242 return 0;
2243
2244 total = count;
2245 moxaLog.rxcnt[tty->index] += total;
2246 if (spage == epage) {
2247 bufhead = readw(ofsAddr + Ofs_rxb);
2248 writew(spage, baseAddr + Control_reg);
2249 while (count > 0) {
2250 ofs = baseAddr + DynPage_addr + bufhead + head;
2251 len = (tail >= head) ? (tail - head) :
2252 (rx_mask + 1 - head);
2253 len = tty_prepare_flip_string(&port->port, &dst,
2254 min(len, count));
2255 memcpy_fromio(dst, ofs, len);
2256 head = (head + len) & rx_mask;
2257 count -= len;
2258 }
2259 } else {
2260 pageno = spage + (head >> 13);
2261 pageofs = head & Page_mask;
2262 while (count > 0) {
2263 writew(pageno, baseAddr + Control_reg);
2264 ofs = baseAddr + DynPage_addr + pageofs;
2265 len = tty_prepare_flip_string(&port->port, &dst,
2266 min(Page_size - pageofs, count));
2267 memcpy_fromio(dst, ofs, len);
2268
2269 count -= len;
2270 pageofs = (pageofs + len) & Page_mask;
2271 if (pageofs == 0 && ++pageno == epage)
2272 pageno = spage;
2273 }
2274 head = (head + total) & rx_mask;
2275 }
2276 writew(head, ofsAddr + RXrptr);
2277 if (readb(ofsAddr + FlagStat) & Xoff_state) {
2278 moxaLowWaterChk = 1;
2279 port->lowChkFlag = 1;
2280 }
2281 return total;
2282 }
2283
2284
MoxaPortTxQueue(struct moxa_port * port)2285 static unsigned int MoxaPortTxQueue(struct moxa_port *port)
2286 {
2287 void __iomem *ofsAddr = port->tableAddr;
2288 u16 rptr, wptr, mask;
2289
2290 rptr = readw(ofsAddr + TXrptr);
2291 wptr = readw(ofsAddr + TXwptr);
2292 mask = readw(ofsAddr + TX_mask);
2293 return (wptr - rptr) & mask;
2294 }
2295
MoxaPortTxFree(struct moxa_port * port)2296 static unsigned int MoxaPortTxFree(struct moxa_port *port)
2297 {
2298 void __iomem *ofsAddr = port->tableAddr;
2299 u16 rptr, wptr, mask;
2300
2301 rptr = readw(ofsAddr + TXrptr);
2302 wptr = readw(ofsAddr + TXwptr);
2303 mask = readw(ofsAddr + TX_mask);
2304 return mask - ((wptr - rptr) & mask);
2305 }
2306
MoxaPortRxQueue(struct moxa_port * port)2307 static int MoxaPortRxQueue(struct moxa_port *port)
2308 {
2309 void __iomem *ofsAddr = port->tableAddr;
2310 u16 rptr, wptr, mask;
2311
2312 rptr = readw(ofsAddr + RXrptr);
2313 wptr = readw(ofsAddr + RXwptr);
2314 mask = readw(ofsAddr + RX_mask);
2315 return (wptr - rptr) & mask;
2316 }
2317
MoxaPortTxDisable(struct moxa_port * port)2318 static void MoxaPortTxDisable(struct moxa_port *port)
2319 {
2320 moxafunc(port->tableAddr, FC_SetXoffState, Magic_code);
2321 }
2322
MoxaPortTxEnable(struct moxa_port * port)2323 static void MoxaPortTxEnable(struct moxa_port *port)
2324 {
2325 moxafunc(port->tableAddr, FC_SetXonState, Magic_code);
2326 }
2327
moxa_get_serial_info(struct tty_struct * tty,struct serial_struct * ss)2328 static int moxa_get_serial_info(struct tty_struct *tty,
2329 struct serial_struct *ss)
2330 {
2331 struct moxa_port *info = tty->driver_data;
2332
2333 if (tty->index == MAX_PORTS)
2334 return -EINVAL;
2335 if (!info)
2336 return -ENODEV;
2337 mutex_lock(&info->port.mutex);
2338 ss->type = info->type;
2339 ss->line = info->port.tty->index;
2340 ss->flags = info->port.flags;
2341 ss->baud_base = 921600;
2342 ss->close_delay = jiffies_to_msecs(info->port.close_delay) / 10;
2343 mutex_unlock(&info->port.mutex);
2344 return 0;
2345 }
2346
2347
moxa_set_serial_info(struct tty_struct * tty,struct serial_struct * ss)2348 static int moxa_set_serial_info(struct tty_struct *tty,
2349 struct serial_struct *ss)
2350 {
2351 struct moxa_port *info = tty->driver_data;
2352 unsigned int close_delay;
2353
2354 if (tty->index == MAX_PORTS)
2355 return -EINVAL;
2356 if (!info)
2357 return -ENODEV;
2358
2359 close_delay = msecs_to_jiffies(ss->close_delay * 10);
2360
2361 mutex_lock(&info->port.mutex);
2362 if (!capable(CAP_SYS_ADMIN)) {
2363 if (close_delay != info->port.close_delay ||
2364 ss->type != info->type ||
2365 ((ss->flags & ~ASYNC_USR_MASK) !=
2366 (info->port.flags & ~ASYNC_USR_MASK))) {
2367 mutex_unlock(&info->port.mutex);
2368 return -EPERM;
2369 }
2370 } else {
2371 info->port.close_delay = close_delay;
2372
2373 MoxaSetFifo(info, ss->type == PORT_16550A);
2374
2375 info->type = ss->type;
2376 }
2377 mutex_unlock(&info->port.mutex);
2378 return 0;
2379 }
2380
2381
2382
2383 /*****************************************************************************
2384 * Static local functions: *
2385 *****************************************************************************/
2386
MoxaSetFifo(struct moxa_port * port,int enable)2387 static void MoxaSetFifo(struct moxa_port *port, int enable)
2388 {
2389 void __iomem *ofsAddr = port->tableAddr;
2390
2391 if (!enable) {
2392 moxafunc(ofsAddr, FC_SetRxFIFOTrig, 0);
2393 moxafunc(ofsAddr, FC_SetTxFIFOCnt, 1);
2394 } else {
2395 moxafunc(ofsAddr, FC_SetRxFIFOTrig, 3);
2396 moxafunc(ofsAddr, FC_SetTxFIFOCnt, 16);
2397 }
2398 }
2399