xref: /openbmc/linux/drivers/tty/hvc/hvc_dcc.c (revision 9a29f5fc)
1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright (c) 2010, 2014, 2022 The Linux Foundation. All rights reserved.  */
3 
4 #include <linux/console.h>
5 #include <linux/cpu.h>
6 #include <linux/cpumask.h>
7 #include <linux/init.h>
8 #include <linux/kfifo.h>
9 #include <linux/serial.h>
10 #include <linux/serial_core.h>
11 #include <linux/smp.h>
12 #include <linux/spinlock.h>
13 
14 #include <asm/dcc.h>
15 #include <asm/processor.h>
16 
17 #include "hvc_console.h"
18 
19 /* DCC Status Bits */
20 #define DCC_STATUS_RX		(1 << 30)
21 #define DCC_STATUS_TX		(1 << 29)
22 
23 #define DCC_INBUF_SIZE		128
24 #define DCC_OUTBUF_SIZE		1024
25 
26 /* Lock to serialize access to DCC fifo */
27 static DEFINE_SPINLOCK(dcc_lock);
28 
29 static DEFINE_KFIFO(inbuf, unsigned char, DCC_INBUF_SIZE);
30 static DEFINE_KFIFO(outbuf, unsigned char, DCC_OUTBUF_SIZE);
31 
32 static void dcc_uart_console_putchar(struct uart_port *port, unsigned char ch)
33 {
34 	while (__dcc_getstatus() & DCC_STATUS_TX)
35 		cpu_relax();
36 
37 	__dcc_putchar(ch);
38 }
39 
40 static void dcc_early_write(struct console *con, const char *s, unsigned n)
41 {
42 	struct earlycon_device *dev = con->data;
43 
44 	uart_console_write(&dev->port, s, n, dcc_uart_console_putchar);
45 }
46 
47 static int __init dcc_early_console_setup(struct earlycon_device *device,
48 					  const char *opt)
49 {
50 	device->con->write = dcc_early_write;
51 
52 	return 0;
53 }
54 
55 EARLYCON_DECLARE(dcc, dcc_early_console_setup);
56 
57 static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
58 {
59 	int i;
60 
61 	for (i = 0; i < count; i++) {
62 		while (__dcc_getstatus() & DCC_STATUS_TX)
63 			cpu_relax();
64 
65 		__dcc_putchar(buf[i]);
66 	}
67 
68 	return count;
69 }
70 
71 static int hvc_dcc_get_chars(uint32_t vt, char *buf, int count)
72 {
73 	int i;
74 
75 	for (i = 0; i < count; ++i)
76 		if (__dcc_getstatus() & DCC_STATUS_RX)
77 			buf[i] = __dcc_getchar();
78 		else
79 			break;
80 
81 	return i;
82 }
83 
84 /*
85  * Check if the DCC is enabled. If CONFIG_HVC_DCC_SERIALIZE_SMP is enabled,
86  * then we assume then this function will be called first on core0. That way,
87  * dcc_core0_available will be true only if it's available on core0.
88  */
89 static bool hvc_dcc_check(void)
90 {
91 	unsigned long time = jiffies + (HZ / 10);
92 	static bool dcc_core0_available;
93 
94 	/*
95 	 * If we're not on core 0, but we previously confirmed that DCC is
96 	 * active, then just return true.
97 	 */
98 	int cpu = get_cpu();
99 
100 	if (IS_ENABLED(CONFIG_HVC_DCC_SERIALIZE_SMP) && cpu && dcc_core0_available) {
101 		put_cpu();
102 		return true;
103 	}
104 
105 	put_cpu();
106 
107 	/* Write a test character to check if it is handled */
108 	__dcc_putchar('\n');
109 
110 	while (time_is_after_jiffies(time)) {
111 		if (!(__dcc_getstatus() & DCC_STATUS_TX)) {
112 			dcc_core0_available = true;
113 			return true;
114 		}
115 	}
116 
117 	return false;
118 }
119 
120 /*
121  * Workqueue function that writes the output FIFO to the DCC on core 0.
122  */
123 static void dcc_put_work(struct work_struct *work)
124 {
125 	unsigned char ch;
126 	unsigned long irqflags;
127 
128 	spin_lock_irqsave(&dcc_lock, irqflags);
129 
130 	/* While there's data in the output FIFO, write it to the DCC */
131 	while (kfifo_get(&outbuf, &ch))
132 		hvc_dcc_put_chars(0, &ch, 1);
133 
134 	/* While we're at it, check for any input characters */
135 	while (!kfifo_is_full(&inbuf)) {
136 		if (!hvc_dcc_get_chars(0, &ch, 1))
137 			break;
138 		kfifo_put(&inbuf, ch);
139 	}
140 
141 	spin_unlock_irqrestore(&dcc_lock, irqflags);
142 }
143 
144 static DECLARE_WORK(dcc_pwork, dcc_put_work);
145 
146 /*
147  * Workqueue function that reads characters from DCC and puts them into the
148  * input FIFO.
149  */
150 static void dcc_get_work(struct work_struct *work)
151 {
152 	unsigned char ch;
153 	unsigned long irqflags;
154 
155 	/*
156 	 * Read characters from DCC and put them into the input FIFO, as
157 	 * long as there is room and we have characters to read.
158 	 */
159 	spin_lock_irqsave(&dcc_lock, irqflags);
160 
161 	while (!kfifo_is_full(&inbuf)) {
162 		if (!hvc_dcc_get_chars(0, &ch, 1))
163 			break;
164 		kfifo_put(&inbuf, ch);
165 	}
166 	spin_unlock_irqrestore(&dcc_lock, irqflags);
167 }
168 
169 static DECLARE_WORK(dcc_gwork, dcc_get_work);
170 
171 /*
172  * Write characters directly to the DCC if we're on core 0 and the FIFO
173  * is empty, or write them to the FIFO if we're not.
174  */
175 static int hvc_dcc0_put_chars(u32 vt, const char *buf, int count)
176 {
177 	int len;
178 	unsigned long irqflags;
179 
180 	if (!IS_ENABLED(CONFIG_HVC_DCC_SERIALIZE_SMP))
181 		return hvc_dcc_put_chars(vt, buf, count);
182 
183 	spin_lock_irqsave(&dcc_lock, irqflags);
184 	if (smp_processor_id() || (!kfifo_is_empty(&outbuf))) {
185 		len = kfifo_in(&outbuf, buf, count);
186 		spin_unlock_irqrestore(&dcc_lock, irqflags);
187 
188 		/*
189 		 * We just push data to the output FIFO, so schedule the
190 		 * workqueue that will actually write that data to DCC.
191 		 * CPU hotplug is disabled in dcc_init so CPU0 cannot be
192 		 * offlined after the cpu online check.
193 		 */
194 		if (cpu_online(0))
195 			schedule_work_on(0, &dcc_pwork);
196 
197 		return len;
198 	}
199 
200 	/*
201 	 * If we're already on core 0, and the FIFO is empty, then just
202 	 * write the data to DCC.
203 	 */
204 	len = hvc_dcc_put_chars(vt, buf, count);
205 	spin_unlock_irqrestore(&dcc_lock, irqflags);
206 
207 	return len;
208 }
209 
210 /*
211  * Read characters directly from the DCC if we're on core 0 and the FIFO
212  * is empty, or read them from the FIFO if we're not.
213  */
214 static int hvc_dcc0_get_chars(u32 vt, char *buf, int count)
215 {
216 	int len;
217 	unsigned long irqflags;
218 
219 	if (!IS_ENABLED(CONFIG_HVC_DCC_SERIALIZE_SMP))
220 		return hvc_dcc_get_chars(vt, buf, count);
221 
222 	spin_lock_irqsave(&dcc_lock, irqflags);
223 
224 	if (smp_processor_id() || (!kfifo_is_empty(&inbuf))) {
225 		len = kfifo_out(&inbuf, buf, count);
226 		spin_unlock_irqrestore(&dcc_lock, irqflags);
227 
228 		/*
229 		 * If the FIFO was empty, there may be characters in the DCC
230 		 * that we haven't read yet.  Schedule a workqueue to fill
231 		 * the input FIFO, so that the next time this function is
232 		 * called, we'll have data. CPU hotplug is disabled in dcc_init
233 		 * so CPU0 cannot be offlined after the cpu online check.
234 		 */
235 		if (!len && cpu_online(0))
236 			schedule_work_on(0, &dcc_gwork);
237 
238 		return len;
239 	}
240 
241 	/*
242 	 * If we're already on core 0, and the FIFO is empty, then just
243 	 * read the data from DCC.
244 	 */
245 	len = hvc_dcc_get_chars(vt, buf, count);
246 	spin_unlock_irqrestore(&dcc_lock, irqflags);
247 
248 	return len;
249 }
250 
251 static const struct hv_ops hvc_dcc_get_put_ops = {
252 	.get_chars = hvc_dcc0_get_chars,
253 	.put_chars = hvc_dcc0_put_chars,
254 };
255 
256 static int __init hvc_dcc_console_init(void)
257 {
258 	int ret;
259 
260 	if (!hvc_dcc_check())
261 		return -ENODEV;
262 
263 	/* Returns -1 if error */
264 	ret = hvc_instantiate(0, 0, &hvc_dcc_get_put_ops);
265 
266 	return ret < 0 ? -ENODEV : 0;
267 }
268 console_initcall(hvc_dcc_console_init);
269 
270 static int __init hvc_dcc_init(void)
271 {
272 	struct hvc_struct *p;
273 
274 	if (!hvc_dcc_check())
275 		return -ENODEV;
276 
277 	if (IS_ENABLED(CONFIG_HVC_DCC_SERIALIZE_SMP)) {
278 		pr_warn("\n");
279 		pr_warn("********************************************************************\n");
280 		pr_warn("**     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE           **\n");
281 		pr_warn("**                                                                **\n");
282 		pr_warn("**  HVC_DCC_SERIALIZE_SMP SUPPORT HAS BEEN ENABLED IN THIS KERNEL **\n");
283 		pr_warn("**                                                                **\n");
284 		pr_warn("** This means that this is a DEBUG kernel and unsafe for          **\n");
285 		pr_warn("** production use and has important feature like CPU hotplug      **\n");
286 		pr_warn("** disabled.                                                      **\n");
287 		pr_warn("**                                                                **\n");
288 		pr_warn("** If you see this message and you are not debugging the          **\n");
289 		pr_warn("** kernel, report this immediately to your vendor!                **\n");
290 		pr_warn("**                                                                **\n");
291 		pr_warn("**     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE           **\n");
292 		pr_warn("********************************************************************\n");
293 
294 		cpu_hotplug_disable();
295 	}
296 
297 	p = hvc_alloc(0, 0, &hvc_dcc_get_put_ops, 128);
298 
299 	return PTR_ERR_OR_ZERO(p);
300 }
301 device_initcall(hvc_dcc_init);
302