xref: /openbmc/linux/drivers/thunderbolt/tmu.c (revision d9565bf4)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Thunderbolt Time Management Unit (TMU) support
4  *
5  * Copyright (C) 2019, Intel Corporation
6  * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
7  *	    Rajmohan Mani <rajmohan.mani@intel.com>
8  */
9 
10 #include <linux/delay.h>
11 
12 #include "tb.h"
13 
14 static const char *tb_switch_tmu_mode_name(const struct tb_switch *sw)
15 {
16 	bool root_switch = !tb_route(sw);
17 
18 	switch (sw->tmu.rate) {
19 	case TB_SWITCH_TMU_RATE_OFF:
20 		return "off";
21 
22 	case TB_SWITCH_TMU_RATE_HIFI:
23 		/* Root switch does not have upstream directionality */
24 		if (root_switch)
25 			return "HiFi";
26 		if (sw->tmu.unidirectional)
27 			return "uni-directional, HiFi";
28 		return "bi-directional, HiFi";
29 
30 	case TB_SWITCH_TMU_RATE_NORMAL:
31 		if (root_switch)
32 			return "normal";
33 		return "uni-directional, normal";
34 
35 	default:
36 		return "unknown";
37 	}
38 }
39 
40 static bool tb_switch_tmu_ucap_supported(struct tb_switch *sw)
41 {
42 	int ret;
43 	u32 val;
44 
45 	ret = tb_sw_read(sw, &val, TB_CFG_SWITCH,
46 			 sw->tmu.cap + TMU_RTR_CS_0, 1);
47 	if (ret)
48 		return false;
49 
50 	return !!(val & TMU_RTR_CS_0_UCAP);
51 }
52 
53 static int tb_switch_tmu_rate_read(struct tb_switch *sw)
54 {
55 	int ret;
56 	u32 val;
57 
58 	ret = tb_sw_read(sw, &val, TB_CFG_SWITCH,
59 			 sw->tmu.cap + TMU_RTR_CS_3, 1);
60 	if (ret)
61 		return ret;
62 
63 	val >>= TMU_RTR_CS_3_TS_PACKET_INTERVAL_SHIFT;
64 	return val;
65 }
66 
67 static int tb_switch_tmu_rate_write(struct tb_switch *sw, int rate)
68 {
69 	int ret;
70 	u32 val;
71 
72 	ret = tb_sw_read(sw, &val, TB_CFG_SWITCH,
73 			 sw->tmu.cap + TMU_RTR_CS_3, 1);
74 	if (ret)
75 		return ret;
76 
77 	val &= ~TMU_RTR_CS_3_TS_PACKET_INTERVAL_MASK;
78 	val |= rate << TMU_RTR_CS_3_TS_PACKET_INTERVAL_SHIFT;
79 
80 	return tb_sw_write(sw, &val, TB_CFG_SWITCH,
81 			   sw->tmu.cap + TMU_RTR_CS_3, 1);
82 }
83 
84 static int tb_port_tmu_write(struct tb_port *port, u8 offset, u32 mask,
85 			     u32 value)
86 {
87 	u32 data;
88 	int ret;
89 
90 	ret = tb_port_read(port, &data, TB_CFG_PORT, port->cap_tmu + offset, 1);
91 	if (ret)
92 		return ret;
93 
94 	data &= ~mask;
95 	data |= value;
96 
97 	return tb_port_write(port, &data, TB_CFG_PORT,
98 			     port->cap_tmu + offset, 1);
99 }
100 
101 static int tb_port_tmu_set_unidirectional(struct tb_port *port,
102 					  bool unidirectional)
103 {
104 	u32 val;
105 
106 	if (!port->sw->tmu.has_ucap)
107 		return 0;
108 
109 	val = unidirectional ? TMU_ADP_CS_3_UDM : 0;
110 	return tb_port_tmu_write(port, TMU_ADP_CS_3, TMU_ADP_CS_3_UDM, val);
111 }
112 
113 static inline int tb_port_tmu_unidirectional_disable(struct tb_port *port)
114 {
115 	return tb_port_tmu_set_unidirectional(port, false);
116 }
117 
118 static inline int tb_port_tmu_unidirectional_enable(struct tb_port *port)
119 {
120 	return tb_port_tmu_set_unidirectional(port, true);
121 }
122 
123 static bool tb_port_tmu_is_unidirectional(struct tb_port *port)
124 {
125 	int ret;
126 	u32 val;
127 
128 	ret = tb_port_read(port, &val, TB_CFG_PORT,
129 			   port->cap_tmu + TMU_ADP_CS_3, 1);
130 	if (ret)
131 		return false;
132 
133 	return val & TMU_ADP_CS_3_UDM;
134 }
135 
136 static int tb_port_tmu_time_sync(struct tb_port *port, bool time_sync)
137 {
138 	u32 val = time_sync ? TMU_ADP_CS_6_DTS : 0;
139 
140 	return tb_port_tmu_write(port, TMU_ADP_CS_6, TMU_ADP_CS_6_DTS, val);
141 }
142 
143 static int tb_port_tmu_time_sync_disable(struct tb_port *port)
144 {
145 	return tb_port_tmu_time_sync(port, true);
146 }
147 
148 static int tb_port_tmu_time_sync_enable(struct tb_port *port)
149 {
150 	return tb_port_tmu_time_sync(port, false);
151 }
152 
153 static int tb_switch_tmu_set_time_disruption(struct tb_switch *sw, bool set)
154 {
155 	u32 val, offset, bit;
156 	int ret;
157 
158 	if (tb_switch_is_usb4(sw)) {
159 		offset = sw->tmu.cap + TMU_RTR_CS_0;
160 		bit = TMU_RTR_CS_0_TD;
161 	} else {
162 		offset = sw->cap_vsec_tmu + TB_TIME_VSEC_3_CS_26;
163 		bit = TB_TIME_VSEC_3_CS_26_TD;
164 	}
165 
166 	ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, offset, 1);
167 	if (ret)
168 		return ret;
169 
170 	if (set)
171 		val |= bit;
172 	else
173 		val &= ~bit;
174 
175 	return tb_sw_write(sw, &val, TB_CFG_SWITCH, offset, 1);
176 }
177 
178 /**
179  * tb_switch_tmu_init() - Initialize switch TMU structures
180  * @sw: Switch to initialized
181  *
182  * This function must be called before other TMU related functions to
183  * makes the internal structures are filled in correctly. Does not
184  * change any hardware configuration.
185  */
186 int tb_switch_tmu_init(struct tb_switch *sw)
187 {
188 	struct tb_port *port;
189 	int ret;
190 
191 	if (tb_switch_is_icm(sw))
192 		return 0;
193 
194 	ret = tb_switch_find_cap(sw, TB_SWITCH_CAP_TMU);
195 	if (ret > 0)
196 		sw->tmu.cap = ret;
197 
198 	tb_switch_for_each_port(sw, port) {
199 		int cap;
200 
201 		cap = tb_port_find_cap(port, TB_PORT_CAP_TIME1);
202 		if (cap > 0)
203 			port->cap_tmu = cap;
204 	}
205 
206 	ret = tb_switch_tmu_rate_read(sw);
207 	if (ret < 0)
208 		return ret;
209 
210 	sw->tmu.rate = ret;
211 
212 	sw->tmu.has_ucap = tb_switch_tmu_ucap_supported(sw);
213 	if (sw->tmu.has_ucap) {
214 		tb_sw_dbg(sw, "TMU: supports uni-directional mode\n");
215 
216 		if (tb_route(sw)) {
217 			struct tb_port *up = tb_upstream_port(sw);
218 
219 			sw->tmu.unidirectional =
220 				tb_port_tmu_is_unidirectional(up);
221 		}
222 	} else {
223 		sw->tmu.unidirectional = false;
224 	}
225 
226 	tb_sw_dbg(sw, "TMU: current mode: %s\n", tb_switch_tmu_mode_name(sw));
227 	return 0;
228 }
229 
230 /**
231  * tb_switch_tmu_post_time() - Update switch local time
232  * @sw: Switch whose time to update
233  *
234  * Updates switch local time using time posting procedure.
235  */
236 int tb_switch_tmu_post_time(struct tb_switch *sw)
237 {
238 	unsigned int post_time_high_offset, post_time_high = 0;
239 	unsigned int post_local_time_offset, post_time_offset;
240 	struct tb_switch *root_switch = sw->tb->root_switch;
241 	u64 hi, mid, lo, local_time, post_time;
242 	int i, ret, retries = 100;
243 	u32 gm_local_time[3];
244 
245 	if (!tb_route(sw))
246 		return 0;
247 
248 	if (!tb_switch_is_usb4(sw))
249 		return 0;
250 
251 	/* Need to be able to read the grand master time */
252 	if (!root_switch->tmu.cap)
253 		return 0;
254 
255 	ret = tb_sw_read(root_switch, gm_local_time, TB_CFG_SWITCH,
256 			 root_switch->tmu.cap + TMU_RTR_CS_1,
257 			 ARRAY_SIZE(gm_local_time));
258 	if (ret)
259 		return ret;
260 
261 	for (i = 0; i < ARRAY_SIZE(gm_local_time); i++)
262 		tb_sw_dbg(root_switch, "local_time[%d]=0x%08x\n", i,
263 			  gm_local_time[i]);
264 
265 	/* Convert to nanoseconds (drop fractional part) */
266 	hi = gm_local_time[2] & TMU_RTR_CS_3_LOCAL_TIME_NS_MASK;
267 	mid = gm_local_time[1];
268 	lo = (gm_local_time[0] & TMU_RTR_CS_1_LOCAL_TIME_NS_MASK) >>
269 		TMU_RTR_CS_1_LOCAL_TIME_NS_SHIFT;
270 	local_time = hi << 48 | mid << 16 | lo;
271 
272 	/* Tell the switch that time sync is disrupted for a while */
273 	ret = tb_switch_tmu_set_time_disruption(sw, true);
274 	if (ret)
275 		return ret;
276 
277 	post_local_time_offset = sw->tmu.cap + TMU_RTR_CS_22;
278 	post_time_offset = sw->tmu.cap + TMU_RTR_CS_24;
279 	post_time_high_offset = sw->tmu.cap + TMU_RTR_CS_25;
280 
281 	/*
282 	 * Write the Grandmaster time to the Post Local Time registers
283 	 * of the new switch.
284 	 */
285 	ret = tb_sw_write(sw, &local_time, TB_CFG_SWITCH,
286 			  post_local_time_offset, 2);
287 	if (ret)
288 		goto out;
289 
290 	/*
291 	 * Have the new switch update its local time by:
292 	 * 1) writing 0x1 to the Post Time Low register and 0xffffffff to
293 	 * Post Time High register.
294 	 * 2) write 0 to Post Time High register and then wait for
295 	 * the completion of the post_time register becomes 0.
296 	 * This means the time has been converged properly.
297 	 */
298 	post_time = 0xffffffff00000001ULL;
299 
300 	ret = tb_sw_write(sw, &post_time, TB_CFG_SWITCH, post_time_offset, 2);
301 	if (ret)
302 		goto out;
303 
304 	ret = tb_sw_write(sw, &post_time_high, TB_CFG_SWITCH,
305 			  post_time_high_offset, 1);
306 	if (ret)
307 		goto out;
308 
309 	do {
310 		usleep_range(5, 10);
311 		ret = tb_sw_read(sw, &post_time, TB_CFG_SWITCH,
312 				 post_time_offset, 2);
313 		if (ret)
314 			goto out;
315 	} while (--retries && post_time);
316 
317 	if (!retries) {
318 		ret = -ETIMEDOUT;
319 		goto out;
320 	}
321 
322 	tb_sw_dbg(sw, "TMU: updated local time to %#llx\n", local_time);
323 
324 out:
325 	tb_switch_tmu_set_time_disruption(sw, false);
326 	return ret;
327 }
328 
329 /**
330  * tb_switch_tmu_disable() - Disable TMU of a switch
331  * @sw: Switch whose TMU to disable
332  *
333  * Turns off TMU of @sw if it is enabled. If not enabled does nothing.
334  */
335 int tb_switch_tmu_disable(struct tb_switch *sw)
336 {
337 	/*
338 	 * No need to disable TMU on devices that don't support CLx since
339 	 * on these devices e.g. Alpine Ridge and earlier, the TMU mode
340 	 * HiFi bi-directional is enabled by default and we don't change it.
341 	 */
342 	if (!tb_switch_is_clx_supported(sw))
343 		return 0;
344 
345 	/* Already disabled? */
346 	if (sw->tmu.rate == TB_SWITCH_TMU_RATE_OFF)
347 		return 0;
348 
349 
350 	if (tb_route(sw)) {
351 		bool unidirectional = tb_switch_tmu_hifi_is_enabled(sw, true);
352 		struct tb_switch *parent = tb_switch_parent(sw);
353 		struct tb_port *down, *up;
354 		int ret;
355 
356 		down = tb_port_at(tb_route(sw), parent);
357 		up = tb_upstream_port(sw);
358 		/*
359 		 * In case of uni-directional time sync, TMU handshake is
360 		 * initiated by upstream router. In case of bi-directional
361 		 * time sync, TMU handshake is initiated by downstream router.
362 		 * Therefore, we change the rate to off in the respective
363 		 * router.
364 		 */
365 		if (unidirectional)
366 			tb_switch_tmu_rate_write(parent, TB_SWITCH_TMU_RATE_OFF);
367 		else
368 			tb_switch_tmu_rate_write(sw, TB_SWITCH_TMU_RATE_OFF);
369 
370 		tb_port_tmu_time_sync_disable(up);
371 		ret = tb_port_tmu_time_sync_disable(down);
372 		if (ret)
373 			return ret;
374 
375 		if (unidirectional) {
376 			/* The switch may be unplugged so ignore any errors */
377 			tb_port_tmu_unidirectional_disable(up);
378 			ret = tb_port_tmu_unidirectional_disable(down);
379 			if (ret)
380 				return ret;
381 		}
382 	} else {
383 		tb_switch_tmu_rate_write(sw, TB_SWITCH_TMU_RATE_OFF);
384 	}
385 
386 	sw->tmu.unidirectional = false;
387 	sw->tmu.rate = TB_SWITCH_TMU_RATE_OFF;
388 
389 	tb_sw_dbg(sw, "TMU: disabled\n");
390 	return 0;
391 }
392 
393 static void __tb_switch_tmu_off(struct tb_switch *sw, bool unidirectional)
394 {
395 	struct tb_switch *parent = tb_switch_parent(sw);
396 	struct tb_port *down, *up;
397 
398 	down = tb_port_at(tb_route(sw), parent);
399 	up = tb_upstream_port(sw);
400 	/*
401 	 * In case of any failure in one of the steps when setting
402 	 * bi-directional or uni-directional TMU mode, get back to the TMU
403 	 * configurations in off mode. In case of additional failures in
404 	 * the functions below, ignore them since the caller shall already
405 	 * report a failure.
406 	 */
407 	tb_port_tmu_time_sync_disable(down);
408 	tb_port_tmu_time_sync_disable(up);
409 	if (unidirectional)
410 		tb_switch_tmu_rate_write(parent, TB_SWITCH_TMU_RATE_OFF);
411 	else
412 		tb_switch_tmu_rate_write(sw, TB_SWITCH_TMU_RATE_OFF);
413 
414 	tb_port_tmu_unidirectional_disable(down);
415 	tb_port_tmu_unidirectional_disable(up);
416 }
417 
418 /*
419  * This function is called when the previous TMU mode was
420  * TB_SWITCH_TMU_RATE_OFF.
421  */
422 static int __tb_switch_tmu_enable_bidirectional(struct tb_switch *sw)
423 {
424 	struct tb_switch *parent = tb_switch_parent(sw);
425 	struct tb_port *up, *down;
426 	int ret;
427 
428 	up = tb_upstream_port(sw);
429 	down = tb_port_at(tb_route(sw), parent);
430 
431 	ret = tb_port_tmu_unidirectional_disable(up);
432 	if (ret)
433 		return ret;
434 
435 	ret = tb_port_tmu_unidirectional_disable(down);
436 	if (ret)
437 		goto out;
438 
439 	ret = tb_switch_tmu_rate_write(sw, TB_SWITCH_TMU_RATE_HIFI);
440 	if (ret)
441 		goto out;
442 
443 	ret = tb_port_tmu_time_sync_enable(up);
444 	if (ret)
445 		goto out;
446 
447 	ret = tb_port_tmu_time_sync_enable(down);
448 	if (ret)
449 		goto out;
450 
451 	return 0;
452 
453 out:
454 	__tb_switch_tmu_off(sw, false);
455 	return ret;
456 }
457 
458 static int tb_switch_tmu_objection_mask(struct tb_switch *sw)
459 {
460 	u32 val;
461 	int ret;
462 
463 	ret = tb_sw_read(sw, &val, TB_CFG_SWITCH,
464 			 sw->cap_vsec_tmu + TB_TIME_VSEC_3_CS_9, 1);
465 	if (ret)
466 		return ret;
467 
468 	val &= ~TB_TIME_VSEC_3_CS_9_TMU_OBJ_MASK;
469 
470 	return tb_sw_write(sw, &val, TB_CFG_SWITCH,
471 			   sw->cap_vsec_tmu + TB_TIME_VSEC_3_CS_9, 1);
472 }
473 
474 static int tb_switch_tmu_unidirectional_enable(struct tb_switch *sw)
475 {
476 	struct tb_port *up = tb_upstream_port(sw);
477 
478 	return tb_port_tmu_write(up, TMU_ADP_CS_6,
479 				 TMU_ADP_CS_6_DISABLE_TMU_OBJ_MASK,
480 				 TMU_ADP_CS_6_DISABLE_TMU_OBJ_MASK);
481 }
482 
483 /*
484  * This function is called when the previous TMU mode was
485  * TB_SWITCH_TMU_RATE_OFF.
486  */
487 static int __tb_switch_tmu_enable_unidirectional(struct tb_switch *sw)
488 {
489 	struct tb_switch *parent = tb_switch_parent(sw);
490 	struct tb_port *up, *down;
491 	int ret;
492 
493 	up = tb_upstream_port(sw);
494 	down = tb_port_at(tb_route(sw), parent);
495 	ret = tb_switch_tmu_rate_write(parent, TB_SWITCH_TMU_RATE_HIFI);
496 	if (ret)
497 		return ret;
498 
499 	ret = tb_port_tmu_unidirectional_enable(up);
500 	if (ret)
501 		goto out;
502 
503 	ret = tb_port_tmu_time_sync_enable(up);
504 	if (ret)
505 		goto out;
506 
507 	ret = tb_port_tmu_unidirectional_enable(down);
508 	if (ret)
509 		goto out;
510 
511 	ret = tb_port_tmu_time_sync_enable(down);
512 	if (ret)
513 		goto out;
514 
515 	return 0;
516 
517 out:
518 	__tb_switch_tmu_off(sw, true);
519 	return ret;
520 }
521 
522 static int tb_switch_tmu_hifi_enable(struct tb_switch *sw)
523 {
524 	bool unidirectional = sw->tmu.unidirectional_request;
525 	int ret;
526 
527 	if (unidirectional && !sw->tmu.has_ucap)
528 		return -EOPNOTSUPP;
529 
530 	/*
531 	 * No need to enable TMU on devices that don't support CLx since on
532 	 * these devices e.g. Alpine Ridge and earlier, the TMU mode HiFi
533 	 * bi-directional is enabled by default.
534 	 */
535 	if (!tb_switch_is_clx_supported(sw))
536 		return 0;
537 
538 	if (tb_switch_tmu_hifi_is_enabled(sw, sw->tmu.unidirectional_request))
539 		return 0;
540 
541 	if (tb_switch_is_titan_ridge(sw) && unidirectional) {
542 		/* Titan Ridge supports only CL0s */
543 		if (!tb_switch_is_cl0s_enabled(sw))
544 			return -EOPNOTSUPP;
545 
546 		ret = tb_switch_tmu_objection_mask(sw);
547 		if (ret)
548 			return ret;
549 
550 		ret = tb_switch_tmu_unidirectional_enable(sw);
551 		if (ret)
552 			return ret;
553 	}
554 
555 	ret = tb_switch_tmu_set_time_disruption(sw, true);
556 	if (ret)
557 		return ret;
558 
559 	if (tb_route(sw)) {
560 		/* The used mode changes are from OFF to HiFi-Uni/HiFi-BiDir */
561 		if (sw->tmu.rate == TB_SWITCH_TMU_RATE_OFF) {
562 			if (unidirectional)
563 				ret = __tb_switch_tmu_enable_unidirectional(sw);
564 			else
565 				ret = __tb_switch_tmu_enable_bidirectional(sw);
566 			if (ret)
567 				return ret;
568 		}
569 		sw->tmu.unidirectional = unidirectional;
570 	} else {
571 		/*
572 		 * Host router port configurations are written as
573 		 * part of configurations for downstream port of the parent
574 		 * of the child node - see above.
575 		 * Here only the host router' rate configuration is written.
576 		 */
577 		ret = tb_switch_tmu_rate_write(sw, TB_SWITCH_TMU_RATE_HIFI);
578 		if (ret)
579 			return ret;
580 	}
581 
582 	sw->tmu.rate = TB_SWITCH_TMU_RATE_HIFI;
583 
584 	tb_sw_dbg(sw, "TMU: mode set to: %s\n", tb_switch_tmu_mode_name(sw));
585 	return tb_switch_tmu_set_time_disruption(sw, false);
586 }
587 
588 /**
589  * tb_switch_tmu_enable() - Enable TMU on a router
590  * @sw: Router whose TMU to enable
591  *
592  * Enables TMU of a router to be in uni-directional or bi-directional HiFi mode.
593  * Calling tb_switch_tmu_configure() is required before calling this function,
594  * to select the mode HiFi and directionality (uni-directional/bi-directional).
595  * In both modes all tunneling should work. Uni-directional mode is required for
596  * CLx (Link Low-Power) to work.
597  */
598 int tb_switch_tmu_enable(struct tb_switch *sw)
599 {
600 	if (sw->tmu.rate_request == TB_SWITCH_TMU_RATE_NORMAL)
601 		return -EOPNOTSUPP;
602 
603 	return tb_switch_tmu_hifi_enable(sw);
604 }
605 
606 /**
607  * tb_switch_tmu_configure() - Configure the TMU rate and directionality
608  * @sw: Router whose mode to change
609  * @rate: Rate to configure Off/LowRes/HiFi
610  * @unidirectional: If uni-directional (bi-directional otherwise)
611  *
612  * Selects the rate of the TMU and directionality (uni-directional or
613  * bi-directional). Must be called before tb_switch_tmu_enable().
614  */
615 void tb_switch_tmu_configure(struct tb_switch *sw,
616 			     enum tb_switch_tmu_rate rate, bool unidirectional)
617 {
618 	sw->tmu.unidirectional_request = unidirectional;
619 	sw->tmu.rate_request = rate;
620 }
621