1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * OMAP thermal driver interface 4 * 5 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ 6 * Contact: 7 * Eduardo Valentin <eduardo.valentin@ti.com> 8 */ 9 10 #include <linux/device.h> 11 #include <linux/err.h> 12 #include <linux/mutex.h> 13 #include <linux/gfp.h> 14 #include <linux/kernel.h> 15 #include <linux/workqueue.h> 16 #include <linux/thermal.h> 17 #include <linux/cpufreq.h> 18 #include <linux/cpumask.h> 19 #include <linux/cpu_cooling.h> 20 #include <linux/of.h> 21 22 #include "ti-thermal.h" 23 #include "ti-bandgap.h" 24 #include "../thermal_hwmon.h" 25 26 /* common data structures */ 27 struct ti_thermal_data { 28 struct cpufreq_policy *policy; 29 struct thermal_zone_device *ti_thermal; 30 struct thermal_zone_device *pcb_tz; 31 struct thermal_cooling_device *cool_dev; 32 struct ti_bandgap *bgp; 33 enum thermal_device_mode mode; 34 struct work_struct thermal_wq; 35 int sensor_id; 36 bool our_zone; 37 }; 38 39 static void ti_thermal_work(struct work_struct *work) 40 { 41 struct ti_thermal_data *data = container_of(work, 42 struct ti_thermal_data, thermal_wq); 43 44 thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED); 45 46 dev_dbg(&data->ti_thermal->device, "updated thermal zone %s\n", 47 data->ti_thermal->type); 48 } 49 50 /** 51 * ti_thermal_hotspot_temperature - returns sensor extrapolated temperature 52 * @t: omap sensor temperature 53 * @s: omap sensor slope value 54 * @c: omap sensor const value 55 */ 56 static inline int ti_thermal_hotspot_temperature(int t, int s, int c) 57 { 58 int delta = t * s / 1000 + c; 59 60 if (delta < 0) 61 delta = 0; 62 63 return t + delta; 64 } 65 66 /* thermal zone ops */ 67 /* Get temperature callback function for thermal zone */ 68 static inline int __ti_thermal_get_temp(void *devdata, int *temp) 69 { 70 struct thermal_zone_device *pcb_tz = NULL; 71 struct ti_thermal_data *data = devdata; 72 struct ti_bandgap *bgp; 73 const struct ti_temp_sensor *s; 74 int ret, tmp, slope, constant; 75 int pcb_temp; 76 77 if (!data) 78 return 0; 79 80 bgp = data->bgp; 81 s = &bgp->conf->sensors[data->sensor_id]; 82 83 ret = ti_bandgap_read_temperature(bgp, data->sensor_id, &tmp); 84 if (ret) 85 return ret; 86 87 /* Default constants */ 88 slope = thermal_zone_get_slope(data->ti_thermal); 89 constant = thermal_zone_get_offset(data->ti_thermal); 90 91 pcb_tz = data->pcb_tz; 92 /* In case pcb zone is available, use the extrapolation rule with it */ 93 if (!IS_ERR(pcb_tz)) { 94 ret = thermal_zone_get_temp(pcb_tz, &pcb_temp); 95 if (!ret) { 96 tmp -= pcb_temp; /* got a valid PCB temp */ 97 slope = s->slope_pcb; 98 constant = s->constant_pcb; 99 } else { 100 dev_err(bgp->dev, 101 "Failed to read PCB state. Using defaults\n"); 102 ret = 0; 103 } 104 } 105 *temp = ti_thermal_hotspot_temperature(tmp, slope, constant); 106 107 return ret; 108 } 109 110 static int __ti_thermal_get_trend(void *p, int trip, enum thermal_trend *trend) 111 { 112 struct ti_thermal_data *data = p; 113 struct ti_bandgap *bgp; 114 int id, tr, ret = 0; 115 116 bgp = data->bgp; 117 id = data->sensor_id; 118 119 ret = ti_bandgap_get_trend(bgp, id, &tr); 120 if (ret) 121 return ret; 122 123 if (tr > 0) 124 *trend = THERMAL_TREND_RAISING; 125 else if (tr < 0) 126 *trend = THERMAL_TREND_DROPPING; 127 else 128 *trend = THERMAL_TREND_STABLE; 129 130 return 0; 131 } 132 133 static const struct thermal_zone_of_device_ops ti_of_thermal_ops = { 134 .get_temp = __ti_thermal_get_temp, 135 .get_trend = __ti_thermal_get_trend, 136 }; 137 138 static struct ti_thermal_data 139 *ti_thermal_build_data(struct ti_bandgap *bgp, int id) 140 { 141 struct ti_thermal_data *data; 142 143 data = devm_kzalloc(bgp->dev, sizeof(*data), GFP_KERNEL); 144 if (!data) { 145 dev_err(bgp->dev, "kzalloc fail\n"); 146 return NULL; 147 } 148 data->sensor_id = id; 149 data->bgp = bgp; 150 data->mode = THERMAL_DEVICE_ENABLED; 151 /* pcb_tz will be either valid or PTR_ERR() */ 152 data->pcb_tz = thermal_zone_get_zone_by_name("pcb"); 153 INIT_WORK(&data->thermal_wq, ti_thermal_work); 154 155 return data; 156 } 157 158 int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, 159 char *domain) 160 { 161 struct ti_thermal_data *data; 162 int interval; 163 164 data = ti_bandgap_get_sensor_data(bgp, id); 165 166 if (IS_ERR_OR_NULL(data)) 167 data = ti_thermal_build_data(bgp, id); 168 169 if (!data) 170 return -EINVAL; 171 172 /* in case this is specified by DT */ 173 data->ti_thermal = devm_thermal_zone_of_sensor_register(bgp->dev, id, 174 data, &ti_of_thermal_ops); 175 if (IS_ERR(data->ti_thermal)) { 176 dev_err(bgp->dev, "thermal zone device is NULL\n"); 177 return PTR_ERR(data->ti_thermal); 178 } 179 180 interval = jiffies_to_msecs(data->ti_thermal->polling_delay_jiffies); 181 182 ti_bandgap_set_sensor_data(bgp, id, data); 183 ti_bandgap_write_update_interval(bgp, data->sensor_id, interval); 184 185 if (devm_thermal_add_hwmon_sysfs(data->ti_thermal)) 186 dev_warn(bgp->dev, "failed to add hwmon sysfs attributes\n"); 187 188 return 0; 189 } 190 191 int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id) 192 { 193 struct ti_thermal_data *data; 194 195 data = ti_bandgap_get_sensor_data(bgp, id); 196 197 if (!IS_ERR_OR_NULL(data) && data->ti_thermal) { 198 if (data->our_zone) 199 thermal_zone_device_unregister(data->ti_thermal); 200 } 201 202 return 0; 203 } 204 205 int ti_thermal_report_sensor_temperature(struct ti_bandgap *bgp, int id) 206 { 207 struct ti_thermal_data *data; 208 209 data = ti_bandgap_get_sensor_data(bgp, id); 210 211 schedule_work(&data->thermal_wq); 212 213 return 0; 214 } 215 216 int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id) 217 { 218 struct ti_thermal_data *data; 219 struct device_node *np = bgp->dev->of_node; 220 221 /* 222 * We are assuming here that if one deploys the zone 223 * using DT, then it must be aware that the cooling device 224 * loading has to happen via cpufreq driver. 225 */ 226 if (of_find_property(np, "#thermal-sensor-cells", NULL)) 227 return 0; 228 229 data = ti_bandgap_get_sensor_data(bgp, id); 230 if (!data || IS_ERR(data)) 231 data = ti_thermal_build_data(bgp, id); 232 233 if (!data) 234 return -EINVAL; 235 236 data->policy = cpufreq_cpu_get(0); 237 if (!data->policy) { 238 pr_debug("%s: CPUFreq policy not found\n", __func__); 239 return -EPROBE_DEFER; 240 } 241 242 /* Register cooling device */ 243 data->cool_dev = cpufreq_cooling_register(data->policy); 244 if (IS_ERR(data->cool_dev)) { 245 int ret = PTR_ERR(data->cool_dev); 246 dev_err(bgp->dev, "Failed to register cpu cooling device %d\n", 247 ret); 248 cpufreq_cpu_put(data->policy); 249 250 return ret; 251 } 252 ti_bandgap_set_sensor_data(bgp, id, data); 253 254 return 0; 255 } 256 257 int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id) 258 { 259 struct ti_thermal_data *data; 260 261 data = ti_bandgap_get_sensor_data(bgp, id); 262 263 if (!IS_ERR_OR_NULL(data)) { 264 cpufreq_cooling_unregister(data->cool_dev); 265 if (data->policy) 266 cpufreq_cpu_put(data->policy); 267 } 268 269 return 0; 270 } 271