1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * OMAP4xxx bandgap registers, bitfields and temperature definitions 4 * 5 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ 6 * Contact: 7 * Eduardo Valentin <eduardo.valentin@ti.com> 8 */ 9 #ifndef __OMAP4XXX_BANDGAP_H 10 #define __OMAP4XXX_BANDGAP_H 11 12 /** 13 * *** OMAP4430 *** 14 * 15 * Below, in sequence, are the Register definitions, 16 * the bitfields and the temperature definitions for OMAP4430. 17 */ 18 19 /** 20 * OMAP4430 register definitions 21 * 22 * Registers are defined as offsets. The offsets are 23 * relative to FUSE_OPP_BGAP on 4430. 24 */ 25 26 /* OMAP4430.FUSE_OPP_BGAP */ 27 #define OMAP4430_FUSE_OPP_BGAP 0x0 28 29 /* OMAP4430.TEMP_SENSOR */ 30 #define OMAP4430_TEMP_SENSOR_CTRL_OFFSET 0xCC 31 32 /** 33 * Register and bit definitions for OMAP4430 34 * 35 * All the macros bellow define the required bits for 36 * controlling temperature on OMAP4430. Bit defines are 37 * grouped by register. 38 */ 39 40 /* OMAP4430.TEMP_SENSOR bits */ 41 #define OMAP4430_BGAP_TEMPSOFF_MASK BIT(12) 42 #define OMAP4430_BGAP_TSHUT_MASK BIT(11) 43 #define OMAP4430_CONTINUOUS_MODE_MASK BIT(10) 44 #define OMAP4430_BGAP_TEMP_SENSOR_SOC_MASK BIT(9) 45 #define OMAP4430_BGAP_TEMP_SENSOR_EOCZ_MASK BIT(8) 46 #define OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK (0xff << 0) 47 48 /** 49 * Temperature limits and thresholds for OMAP4430 50 * 51 * All the macros bellow are definitions for handling the 52 * ADC conversions and representation of temperature limits 53 * and thresholds for OMAP4430. 54 */ 55 56 /* 57 * ADC conversion table limits. Ignore values outside the TRM listed 58 * range to avoid bogus thermal shutdowns. See omap4430 TRM chapter 59 * "18.4.10.2.3 ADC Codes Versus Temperature". 60 */ 61 #define OMAP4430_ADC_START_VALUE 13 62 #define OMAP4430_ADC_END_VALUE 107 63 /* bandgap clock limits (no control on 4430) */ 64 #define OMAP4430_MAX_FREQ 32768 65 #define OMAP4430_MIN_FREQ 32768 66 67 /** 68 * *** OMAP4460 *** Applicable for OMAP4470 69 * 70 * Below, in sequence, are the Register definitions, 71 * the bitfields and the temperature definitions for OMAP4460. 72 */ 73 74 /** 75 * OMAP4460 register definitions 76 * 77 * Registers are defined as offsets. The offsets are 78 * relative to FUSE_OPP_BGAP on 4460. 79 */ 80 81 /* OMAP4460.FUSE_OPP_BGAP */ 82 #define OMAP4460_FUSE_OPP_BGAP 0x0 83 84 /* OMAP4460.TEMP_SENSOR */ 85 #define OMAP4460_TEMP_SENSOR_CTRL_OFFSET 0xCC 86 87 /* OMAP4460.BANDGAP_CTRL */ 88 #define OMAP4460_BGAP_CTRL_OFFSET 0x118 89 90 /* OMAP4460.BANDGAP_COUNTER */ 91 #define OMAP4460_BGAP_COUNTER_OFFSET 0x11C 92 93 /* OMAP4460.BANDGAP_THRESHOLD */ 94 #define OMAP4460_BGAP_THRESHOLD_OFFSET 0x120 95 96 /* OMAP4460.TSHUT_THRESHOLD */ 97 #define OMAP4460_BGAP_TSHUT_OFFSET 0x124 98 99 /* OMAP4460.BANDGAP_STATUS */ 100 #define OMAP4460_BGAP_STATUS_OFFSET 0x128 101 102 /** 103 * Register bitfields for OMAP4460 104 * 105 * All the macros bellow define the required bits for 106 * controlling temperature on OMAP4460. Bit defines are 107 * grouped by register. 108 */ 109 /* OMAP4460.TEMP_SENSOR bits */ 110 #define OMAP4460_BGAP_TEMPSOFF_MASK BIT(13) 111 #define OMAP4460_BGAP_TEMP_SENSOR_SOC_MASK BIT(11) 112 #define OMAP4460_BGAP_TEMP_SENSOR_EOCZ_MASK BIT(10) 113 #define OMAP4460_BGAP_TEMP_SENSOR_DTEMP_MASK (0x3ff << 0) 114 115 /* OMAP4460.BANDGAP_CTRL bits */ 116 #define OMAP4460_CONTINUOUS_MODE_MASK BIT(31) 117 #define OMAP4460_MASK_HOT_MASK BIT(1) 118 #define OMAP4460_MASK_COLD_MASK BIT(0) 119 120 /* OMAP4460.BANDGAP_COUNTER bits */ 121 #define OMAP4460_COUNTER_MASK (0xffffff << 0) 122 123 /* OMAP4460.BANDGAP_THRESHOLD bits */ 124 #define OMAP4460_T_HOT_MASK (0x3ff << 16) 125 #define OMAP4460_T_COLD_MASK (0x3ff << 0) 126 127 /* OMAP4460.TSHUT_THRESHOLD bits */ 128 #define OMAP4460_TSHUT_HOT_MASK (0x3ff << 16) 129 #define OMAP4460_TSHUT_COLD_MASK (0x3ff << 0) 130 131 /* OMAP4460.BANDGAP_STATUS bits */ 132 #define OMAP4460_HOT_FLAG_MASK BIT(1) 133 #define OMAP4460_COLD_FLAG_MASK BIT(0) 134 135 /** 136 * Temperature limits and thresholds for OMAP4460 137 * 138 * All the macros bellow are definitions for handling the 139 * ADC conversions and representation of temperature limits 140 * and thresholds for OMAP4460. 141 */ 142 143 /* ADC conversion table limits */ 144 #define OMAP4460_ADC_START_VALUE 530 145 #define OMAP4460_ADC_END_VALUE 932 146 /* bandgap clock limits */ 147 #define OMAP4460_MAX_FREQ 1500000 148 #define OMAP4460_MIN_FREQ 1000000 149 /* interrupts thresholds */ 150 #define OMAP4460_TSHUT_HOT 900 /* 122 deg C */ 151 #define OMAP4460_TSHUT_COLD 895 /* 100 deg C */ 152 #define OMAP4460_T_HOT 800 /* 73 deg C */ 153 #define OMAP4460_T_COLD 795 /* 71 deg C */ 154 155 #endif /* __OMAP4XXX_BANDGAP_H */ 156