1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Thermal sensor driver for Allwinner SOC
4  * Copyright (C) 2019 Yangtao Li
5  *
6  * Based on the work of Icenowy Zheng <icenowy@aosc.io>
7  * Based on the work of Ondrej Jirman <megous@megous.com>
8  * Based on the work of Josef Gajdusek <atx@atx.name>
9  */
10 
11 #include <linux/clk.h>
12 #include <linux/device.h>
13 #include <linux/interrupt.h>
14 #include <linux/module.h>
15 #include <linux/nvmem-consumer.h>
16 #include <linux/of_device.h>
17 #include <linux/platform_device.h>
18 #include <linux/regmap.h>
19 #include <linux/reset.h>
20 #include <linux/slab.h>
21 #include <linux/thermal.h>
22 
23 #include "thermal_hwmon.h"
24 
25 #define MAX_SENSOR_NUM	4
26 
27 #define FT_TEMP_MASK				GENMASK(11, 0)
28 #define TEMP_CALIB_MASK				GENMASK(11, 0)
29 #define CALIBRATE_DEFAULT			0x800
30 
31 #define SUN8I_THS_CTRL0				0x00
32 #define SUN8I_THS_CTRL2				0x40
33 #define SUN8I_THS_IC				0x44
34 #define SUN8I_THS_IS				0x48
35 #define SUN8I_THS_MFC				0x70
36 #define SUN8I_THS_TEMP_CALIB			0x74
37 #define SUN8I_THS_TEMP_DATA			0x80
38 
39 #define SUN50I_THS_CTRL0			0x00
40 #define SUN50I_H6_THS_ENABLE			0x04
41 #define SUN50I_H6_THS_PC			0x08
42 #define SUN50I_H6_THS_DIC			0x10
43 #define SUN50I_H6_THS_DIS			0x20
44 #define SUN50I_H6_THS_MFC			0x30
45 #define SUN50I_H6_THS_TEMP_CALIB		0xa0
46 #define SUN50I_H6_THS_TEMP_DATA			0xc0
47 
48 #define SUN8I_THS_CTRL0_T_ACQ0(x)		(GENMASK(15, 0) & (x))
49 #define SUN8I_THS_CTRL2_T_ACQ1(x)		((GENMASK(15, 0) & (x)) << 16)
50 #define SUN8I_THS_DATA_IRQ_STS(x)		BIT(x + 8)
51 
52 #define SUN50I_THS_CTRL0_T_ACQ(x)		((GENMASK(15, 0) & (x)) << 16)
53 #define SUN50I_THS_FILTER_EN			BIT(2)
54 #define SUN50I_THS_FILTER_TYPE(x)		(GENMASK(1, 0) & (x))
55 #define SUN50I_H6_THS_PC_TEMP_PERIOD(x)		((GENMASK(19, 0) & (x)) << 12)
56 #define SUN50I_H6_THS_DATA_IRQ_STS(x)		BIT(x)
57 
58 /* millidegree celsius */
59 
60 struct tsensor {
61 	struct ths_device		*tmdev;
62 	struct thermal_zone_device	*tzd;
63 	int				id;
64 };
65 
66 struct ths_thermal_chip {
67 	bool            has_mod_clk;
68 	bool            has_bus_clk_reset;
69 	int		sensor_num;
70 	int		offset;
71 	int		scale;
72 	int		ft_deviation;
73 	int		temp_data_base;
74 	int		(*calibrate)(struct ths_device *tmdev,
75 				     u16 *caldata, int callen);
76 	int		(*init)(struct ths_device *tmdev);
77 	int             (*irq_ack)(struct ths_device *tmdev);
78 	int		(*calc_temp)(struct ths_device *tmdev,
79 				     int id, int reg);
80 };
81 
82 struct ths_device {
83 	const struct ths_thermal_chip		*chip;
84 	struct device				*dev;
85 	struct regmap				*regmap;
86 	struct reset_control			*reset;
87 	struct clk				*bus_clk;
88 	struct clk                              *mod_clk;
89 	struct tsensor				sensor[MAX_SENSOR_NUM];
90 };
91 
92 /* Temp Unit: millidegree Celsius */
93 static int sun8i_ths_calc_temp(struct ths_device *tmdev,
94 			       int id, int reg)
95 {
96 	return tmdev->chip->offset - (reg * tmdev->chip->scale / 10);
97 }
98 
99 static int sun50i_h5_calc_temp(struct ths_device *tmdev,
100 			       int id, int reg)
101 {
102 	if (reg >= 0x500)
103 		return -1191 * reg / 10 + 223000;
104 	else if (!id)
105 		return -1452 * reg / 10 + 259000;
106 	else
107 		return -1590 * reg / 10 + 276000;
108 }
109 
110 static int sun8i_ths_get_temp(void *data, int *temp)
111 {
112 	struct tsensor *s = data;
113 	struct ths_device *tmdev = s->tmdev;
114 	int val = 0;
115 
116 	regmap_read(tmdev->regmap, tmdev->chip->temp_data_base +
117 		    0x4 * s->id, &val);
118 
119 	/* ths have no data yet */
120 	if (!val)
121 		return -EAGAIN;
122 
123 	*temp = tmdev->chip->calc_temp(tmdev, s->id, val);
124 	/*
125 	 * According to the original sdk, there are some platforms(rarely)
126 	 * that add a fixed offset value after calculating the temperature
127 	 * value. We can't simply put it on the formula for calculating the
128 	 * temperature above, because the formula for calculating the
129 	 * temperature above is also used when the sensor is calibrated. If
130 	 * do this, the correct calibration formula is hard to know.
131 	 */
132 	*temp += tmdev->chip->ft_deviation;
133 
134 	return 0;
135 }
136 
137 static const struct thermal_zone_of_device_ops ths_ops = {
138 	.get_temp = sun8i_ths_get_temp,
139 };
140 
141 static const struct regmap_config config = {
142 	.reg_bits = 32,
143 	.val_bits = 32,
144 	.reg_stride = 4,
145 	.fast_io = true,
146 	.max_register = 0xfc,
147 };
148 
149 static int sun8i_h3_irq_ack(struct ths_device *tmdev)
150 {
151 	int i, state, ret = 0;
152 
153 	regmap_read(tmdev->regmap, SUN8I_THS_IS, &state);
154 
155 	for (i = 0; i < tmdev->chip->sensor_num; i++) {
156 		if (state & SUN8I_THS_DATA_IRQ_STS(i)) {
157 			regmap_write(tmdev->regmap, SUN8I_THS_IS,
158 				     SUN8I_THS_DATA_IRQ_STS(i));
159 			ret |= BIT(i);
160 		}
161 	}
162 
163 	return ret;
164 }
165 
166 static int sun50i_h6_irq_ack(struct ths_device *tmdev)
167 {
168 	int i, state, ret = 0;
169 
170 	regmap_read(tmdev->regmap, SUN50I_H6_THS_DIS, &state);
171 
172 	for (i = 0; i < tmdev->chip->sensor_num; i++) {
173 		if (state & SUN50I_H6_THS_DATA_IRQ_STS(i)) {
174 			regmap_write(tmdev->regmap, SUN50I_H6_THS_DIS,
175 				     SUN50I_H6_THS_DATA_IRQ_STS(i));
176 			ret |= BIT(i);
177 		}
178 	}
179 
180 	return ret;
181 }
182 
183 static irqreturn_t sun8i_irq_thread(int irq, void *data)
184 {
185 	struct ths_device *tmdev = data;
186 	int i, state;
187 
188 	state = tmdev->chip->irq_ack(tmdev);
189 
190 	for (i = 0; i < tmdev->chip->sensor_num; i++) {
191 		if (state & BIT(i))
192 			thermal_zone_device_update(tmdev->sensor[i].tzd,
193 						   THERMAL_EVENT_UNSPECIFIED);
194 	}
195 
196 	return IRQ_HANDLED;
197 }
198 
199 static int sun8i_h3_ths_calibrate(struct ths_device *tmdev,
200 				  u16 *caldata, int callen)
201 {
202 	int i;
203 
204 	if (!caldata[0] || callen < 2 * tmdev->chip->sensor_num)
205 		return -EINVAL;
206 
207 	for (i = 0; i < tmdev->chip->sensor_num; i++) {
208 		int offset = (i % 2) << 4;
209 
210 		regmap_update_bits(tmdev->regmap,
211 				   SUN8I_THS_TEMP_CALIB + (4 * (i >> 1)),
212 				   0xfff << offset,
213 				   caldata[i] << offset);
214 	}
215 
216 	return 0;
217 }
218 
219 static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
220 				   u16 *caldata, int callen)
221 {
222 	struct device *dev = tmdev->dev;
223 	int i, ft_temp;
224 
225 	if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num)
226 		return -EINVAL;
227 
228 	/*
229 	 * efuse layout:
230 	 *
231 	 *	0   11  16	 32
232 	 *	+-------+-------+-------+
233 	 *	|temp|  |sensor0|sensor1|
234 	 *	+-------+-------+-------+
235 	 *
236 	 * The calibration data on the H6 is the ambient temperature and
237 	 * sensor values that are filled during the factory test stage.
238 	 *
239 	 * The unit of stored FT temperature is 0.1 degreee celusis.
240 	 *
241 	 * We need to calculate a delta between measured and caluclated
242 	 * register values and this will become a calibration offset.
243 	 */
244 	ft_temp = (caldata[0] & FT_TEMP_MASK) * 100;
245 
246 	for (i = 0; i < tmdev->chip->sensor_num; i++) {
247 		int sensor_reg = caldata[i + 1];
248 		int cdata, offset;
249 		int sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
250 
251 		/*
252 		 * Calibration data is CALIBRATE_DEFAULT - (calculated
253 		 * temperature from sensor reading at factory temperature
254 		 * minus actual factory temperature) * 14.88 (scale from
255 		 * temperature to register values)
256 		 */
257 		cdata = CALIBRATE_DEFAULT -
258 			((sensor_temp - ft_temp) * 10 / tmdev->chip->scale);
259 		if (cdata & ~TEMP_CALIB_MASK) {
260 			/*
261 			 * Calibration value more than 12-bit, but calibration
262 			 * register is 12-bit. In this case, ths hardware can
263 			 * still work without calibration, although the data
264 			 * won't be so accurate.
265 			 */
266 			dev_warn(dev, "sensor%d is not calibrated.\n", i);
267 			continue;
268 		}
269 
270 		offset = (i % 2) * 16;
271 		regmap_update_bits(tmdev->regmap,
272 				   SUN50I_H6_THS_TEMP_CALIB + (i / 2 * 4),
273 				   0xfff << offset,
274 				   cdata << offset);
275 	}
276 
277 	return 0;
278 }
279 
280 static int sun8i_ths_calibrate(struct ths_device *tmdev)
281 {
282 	struct nvmem_cell *calcell;
283 	struct device *dev = tmdev->dev;
284 	u16 *caldata;
285 	size_t callen;
286 	int ret = 0;
287 
288 	calcell = devm_nvmem_cell_get(dev, "calibration");
289 	if (IS_ERR(calcell)) {
290 		if (PTR_ERR(calcell) == -EPROBE_DEFER)
291 			return -EPROBE_DEFER;
292 		/*
293 		 * Even if the external calibration data stored in sid is
294 		 * not accessible, the THS hardware can still work, although
295 		 * the data won't be so accurate.
296 		 *
297 		 * The default value of calibration register is 0x800 for
298 		 * every sensor, and the calibration value is usually 0x7xx
299 		 * or 0x8xx, so they won't be away from the default value
300 		 * for a lot.
301 		 *
302 		 * So here we do not return error if the calibartion data is
303 		 * not available, except the probe needs deferring.
304 		 */
305 		goto out;
306 	}
307 
308 	caldata = nvmem_cell_read(calcell, &callen);
309 	if (IS_ERR(caldata)) {
310 		ret = PTR_ERR(caldata);
311 		goto out;
312 	}
313 
314 	tmdev->chip->calibrate(tmdev, caldata, callen);
315 
316 	kfree(caldata);
317 out:
318 	return ret;
319 }
320 
321 static int sun8i_ths_resource_init(struct ths_device *tmdev)
322 {
323 	struct device *dev = tmdev->dev;
324 	struct platform_device *pdev = to_platform_device(dev);
325 	void __iomem *base;
326 	int ret;
327 
328 	base = devm_platform_ioremap_resource(pdev, 0);
329 	if (IS_ERR(base))
330 		return PTR_ERR(base);
331 
332 	tmdev->regmap = devm_regmap_init_mmio(dev, base, &config);
333 	if (IS_ERR(tmdev->regmap))
334 		return PTR_ERR(tmdev->regmap);
335 
336 	if (tmdev->chip->has_bus_clk_reset) {
337 		tmdev->reset = devm_reset_control_get(dev, NULL);
338 		if (IS_ERR(tmdev->reset))
339 			return PTR_ERR(tmdev->reset);
340 
341 		tmdev->bus_clk = devm_clk_get(&pdev->dev, "bus");
342 		if (IS_ERR(tmdev->bus_clk))
343 			return PTR_ERR(tmdev->bus_clk);
344 	}
345 
346 	if (tmdev->chip->has_mod_clk) {
347 		tmdev->mod_clk = devm_clk_get(&pdev->dev, "mod");
348 		if (IS_ERR(tmdev->mod_clk))
349 			return PTR_ERR(tmdev->mod_clk);
350 	}
351 
352 	ret = reset_control_deassert(tmdev->reset);
353 	if (ret)
354 		return ret;
355 
356 	ret = clk_prepare_enable(tmdev->bus_clk);
357 	if (ret)
358 		goto assert_reset;
359 
360 	ret = clk_set_rate(tmdev->mod_clk, 24000000);
361 	if (ret)
362 		goto bus_disable;
363 
364 	ret = clk_prepare_enable(tmdev->mod_clk);
365 	if (ret)
366 		goto bus_disable;
367 
368 	ret = sun8i_ths_calibrate(tmdev);
369 	if (ret)
370 		goto mod_disable;
371 
372 	return 0;
373 
374 mod_disable:
375 	clk_disable_unprepare(tmdev->mod_clk);
376 bus_disable:
377 	clk_disable_unprepare(tmdev->bus_clk);
378 assert_reset:
379 	reset_control_assert(tmdev->reset);
380 
381 	return ret;
382 }
383 
384 static int sun8i_h3_thermal_init(struct ths_device *tmdev)
385 {
386 	int val;
387 
388 	/* average over 4 samples */
389 	regmap_write(tmdev->regmap, SUN8I_THS_MFC,
390 		     SUN50I_THS_FILTER_EN |
391 		     SUN50I_THS_FILTER_TYPE(1));
392 	/*
393 	 * clkin = 24MHz
394 	 * filter_samples = 4
395 	 * period = 0.25s
396 	 *
397 	 * x = period * clkin / 4096 / filter_samples - 1
398 	 *   = 365
399 	 */
400 	val = GENMASK(7 + tmdev->chip->sensor_num, 8);
401 	regmap_write(tmdev->regmap, SUN8I_THS_IC,
402 		     SUN50I_H6_THS_PC_TEMP_PERIOD(365) | val);
403 	/*
404 	 * T_acq = 20us
405 	 * clkin = 24MHz
406 	 *
407 	 * x = T_acq * clkin - 1
408 	 *   = 479
409 	 */
410 	regmap_write(tmdev->regmap, SUN8I_THS_CTRL0,
411 		     SUN8I_THS_CTRL0_T_ACQ0(479));
412 	val = GENMASK(tmdev->chip->sensor_num - 1, 0);
413 	regmap_write(tmdev->regmap, SUN8I_THS_CTRL2,
414 		     SUN8I_THS_CTRL2_T_ACQ1(479) | val);
415 
416 	return 0;
417 }
418 
419 /*
420  * Without this undocummented value, the returned temperatures would
421  * be higher than real ones by about 20C.
422  */
423 #define SUN50I_H6_CTRL0_UNK 0x0000002f
424 
425 static int sun50i_h6_thermal_init(struct ths_device *tmdev)
426 {
427 	int val;
428 
429 	/*
430 	 * T_acq = 20us
431 	 * clkin = 24MHz
432 	 *
433 	 * x = T_acq * clkin - 1
434 	 *   = 479
435 	 */
436 	regmap_write(tmdev->regmap, SUN50I_THS_CTRL0,
437 		     SUN50I_H6_CTRL0_UNK | SUN50I_THS_CTRL0_T_ACQ(479));
438 	/* average over 4 samples */
439 	regmap_write(tmdev->regmap, SUN50I_H6_THS_MFC,
440 		     SUN50I_THS_FILTER_EN |
441 		     SUN50I_THS_FILTER_TYPE(1));
442 	/*
443 	 * clkin = 24MHz
444 	 * filter_samples = 4
445 	 * period = 0.25s
446 	 *
447 	 * x = period * clkin / 4096 / filter_samples - 1
448 	 *   = 365
449 	 */
450 	regmap_write(tmdev->regmap, SUN50I_H6_THS_PC,
451 		     SUN50I_H6_THS_PC_TEMP_PERIOD(365));
452 	/* enable sensor */
453 	val = GENMASK(tmdev->chip->sensor_num - 1, 0);
454 	regmap_write(tmdev->regmap, SUN50I_H6_THS_ENABLE, val);
455 	/* thermal data interrupt enable */
456 	val = GENMASK(tmdev->chip->sensor_num - 1, 0);
457 	regmap_write(tmdev->regmap, SUN50I_H6_THS_DIC, val);
458 
459 	return 0;
460 }
461 
462 static int sun8i_ths_register(struct ths_device *tmdev)
463 {
464 	int i;
465 
466 	for (i = 0; i < tmdev->chip->sensor_num; i++) {
467 		tmdev->sensor[i].tmdev = tmdev;
468 		tmdev->sensor[i].id = i;
469 		tmdev->sensor[i].tzd =
470 			devm_thermal_zone_of_sensor_register(tmdev->dev,
471 							     i,
472 							     &tmdev->sensor[i],
473 							     &ths_ops);
474 		if (IS_ERR(tmdev->sensor[i].tzd))
475 			return PTR_ERR(tmdev->sensor[i].tzd);
476 
477 		if (devm_thermal_add_hwmon_sysfs(tmdev->sensor[i].tzd))
478 			dev_warn(tmdev->dev,
479 				 "Failed to add hwmon sysfs attributes\n");
480 	}
481 
482 	return 0;
483 }
484 
485 static int sun8i_ths_probe(struct platform_device *pdev)
486 {
487 	struct ths_device *tmdev;
488 	struct device *dev = &pdev->dev;
489 	int ret, irq;
490 
491 	tmdev = devm_kzalloc(dev, sizeof(*tmdev), GFP_KERNEL);
492 	if (!tmdev)
493 		return -ENOMEM;
494 
495 	tmdev->dev = dev;
496 	tmdev->chip = of_device_get_match_data(&pdev->dev);
497 	if (!tmdev->chip)
498 		return -EINVAL;
499 
500 	platform_set_drvdata(pdev, tmdev);
501 
502 	ret = sun8i_ths_resource_init(tmdev);
503 	if (ret)
504 		return ret;
505 
506 	irq = platform_get_irq(pdev, 0);
507 	if (irq < 0)
508 		return irq;
509 
510 	ret = tmdev->chip->init(tmdev);
511 	if (ret)
512 		return ret;
513 
514 	ret = sun8i_ths_register(tmdev);
515 	if (ret)
516 		return ret;
517 
518 	/*
519 	 * Avoid entering the interrupt handler, the thermal device is not
520 	 * registered yet, we deffer the registration of the interrupt to
521 	 * the end.
522 	 */
523 	ret = devm_request_threaded_irq(dev, irq, NULL,
524 					sun8i_irq_thread,
525 					IRQF_ONESHOT, "ths", tmdev);
526 	if (ret)
527 		return ret;
528 
529 	return 0;
530 }
531 
532 static int sun8i_ths_remove(struct platform_device *pdev)
533 {
534 	struct ths_device *tmdev = platform_get_drvdata(pdev);
535 
536 	clk_disable_unprepare(tmdev->mod_clk);
537 	clk_disable_unprepare(tmdev->bus_clk);
538 	reset_control_assert(tmdev->reset);
539 
540 	return 0;
541 }
542 
543 static const struct ths_thermal_chip sun8i_a83t_ths = {
544 	.sensor_num = 3,
545 	.scale = 705,
546 	.offset = 191668,
547 	.temp_data_base = SUN8I_THS_TEMP_DATA,
548 	.calibrate = sun8i_h3_ths_calibrate,
549 	.init = sun8i_h3_thermal_init,
550 	.irq_ack = sun8i_h3_irq_ack,
551 	.calc_temp = sun8i_ths_calc_temp,
552 };
553 
554 static const struct ths_thermal_chip sun8i_h3_ths = {
555 	.sensor_num = 1,
556 	.scale = 1211,
557 	.offset = 217000,
558 	.has_mod_clk = true,
559 	.has_bus_clk_reset = true,
560 	.temp_data_base = SUN8I_THS_TEMP_DATA,
561 	.calibrate = sun8i_h3_ths_calibrate,
562 	.init = sun8i_h3_thermal_init,
563 	.irq_ack = sun8i_h3_irq_ack,
564 	.calc_temp = sun8i_ths_calc_temp,
565 };
566 
567 static const struct ths_thermal_chip sun8i_r40_ths = {
568 	.sensor_num = 2,
569 	.offset = 251086,
570 	.scale = 1130,
571 	.has_mod_clk = true,
572 	.has_bus_clk_reset = true,
573 	.temp_data_base = SUN8I_THS_TEMP_DATA,
574 	.calibrate = sun8i_h3_ths_calibrate,
575 	.init = sun8i_h3_thermal_init,
576 	.irq_ack = sun8i_h3_irq_ack,
577 	.calc_temp = sun8i_ths_calc_temp,
578 };
579 
580 static const struct ths_thermal_chip sun50i_a64_ths = {
581 	.sensor_num = 3,
582 	.offset = 260890,
583 	.scale = 1170,
584 	.has_mod_clk = true,
585 	.has_bus_clk_reset = true,
586 	.temp_data_base = SUN8I_THS_TEMP_DATA,
587 	.calibrate = sun8i_h3_ths_calibrate,
588 	.init = sun8i_h3_thermal_init,
589 	.irq_ack = sun8i_h3_irq_ack,
590 	.calc_temp = sun8i_ths_calc_temp,
591 };
592 
593 static const struct ths_thermal_chip sun50i_h5_ths = {
594 	.sensor_num = 2,
595 	.has_mod_clk = true,
596 	.has_bus_clk_reset = true,
597 	.temp_data_base = SUN8I_THS_TEMP_DATA,
598 	.calibrate = sun8i_h3_ths_calibrate,
599 	.init = sun8i_h3_thermal_init,
600 	.irq_ack = sun8i_h3_irq_ack,
601 	.calc_temp = sun50i_h5_calc_temp,
602 };
603 
604 static const struct ths_thermal_chip sun50i_h6_ths = {
605 	.sensor_num = 2,
606 	.has_bus_clk_reset = true,
607 	.ft_deviation = 7000,
608 	.offset = 187744,
609 	.scale = 672,
610 	.temp_data_base = SUN50I_H6_THS_TEMP_DATA,
611 	.calibrate = sun50i_h6_ths_calibrate,
612 	.init = sun50i_h6_thermal_init,
613 	.irq_ack = sun50i_h6_irq_ack,
614 	.calc_temp = sun8i_ths_calc_temp,
615 };
616 
617 static const struct of_device_id of_ths_match[] = {
618 	{ .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths },
619 	{ .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths },
620 	{ .compatible = "allwinner,sun8i-r40-ths", .data = &sun8i_r40_ths },
621 	{ .compatible = "allwinner,sun50i-a64-ths", .data = &sun50i_a64_ths },
622 	{ .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths },
623 	{ .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths },
624 	{ /* sentinel */ },
625 };
626 MODULE_DEVICE_TABLE(of, of_ths_match);
627 
628 static struct platform_driver ths_driver = {
629 	.probe = sun8i_ths_probe,
630 	.remove = sun8i_ths_remove,
631 	.driver = {
632 		.name = "sun8i-thermal",
633 		.of_match_table = of_ths_match,
634 	},
635 };
636 module_platform_driver(ths_driver);
637 
638 MODULE_DESCRIPTION("Thermal sensor driver for Allwinner SOC");
639 MODULE_LICENSE("GPL v2");
640