1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * exynos_tmu.c - Samsung Exynos TMU (Thermal Management Unit) 4 * 5 * Copyright (C) 2014 Samsung Electronics 6 * Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> 7 * Lukasz Majewski <l.majewski@samsung.com> 8 * 9 * Copyright (C) 2011 Samsung Electronics 10 * Donggeun Kim <dg77.kim@samsung.com> 11 * Amit Daniel Kachhap <amit.kachhap@linaro.org> 12 */ 13 14 #include <linux/clk.h> 15 #include <linux/io.h> 16 #include <linux/interrupt.h> 17 #include <linux/module.h> 18 #include <linux/of_device.h> 19 #include <linux/of_address.h> 20 #include <linux/of_irq.h> 21 #include <linux/platform_device.h> 22 #include <linux/regulator/consumer.h> 23 24 #include <dt-bindings/thermal/thermal_exynos.h> 25 26 #include "../thermal_core.h" 27 28 /* Exynos generic registers */ 29 #define EXYNOS_TMU_REG_TRIMINFO 0x0 30 #define EXYNOS_TMU_REG_CONTROL 0x20 31 #define EXYNOS_TMU_REG_STATUS 0x28 32 #define EXYNOS_TMU_REG_CURRENT_TEMP 0x40 33 #define EXYNOS_TMU_REG_INTEN 0x70 34 #define EXYNOS_TMU_REG_INTSTAT 0x74 35 #define EXYNOS_TMU_REG_INTCLEAR 0x78 36 37 #define EXYNOS_TMU_TEMP_MASK 0xff 38 #define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24 39 #define EXYNOS_TMU_REF_VOLTAGE_MASK 0x1f 40 #define EXYNOS_TMU_BUF_SLOPE_SEL_MASK 0xf 41 #define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8 42 #define EXYNOS_TMU_CORE_EN_SHIFT 0 43 44 /* Exynos3250 specific registers */ 45 #define EXYNOS_TMU_TRIMINFO_CON1 0x10 46 47 /* Exynos4210 specific registers */ 48 #define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44 49 #define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50 50 51 /* Exynos5250, Exynos4412, Exynos3250 specific registers */ 52 #define EXYNOS_TMU_TRIMINFO_CON2 0x14 53 #define EXYNOS_THD_TEMP_RISE 0x50 54 #define EXYNOS_THD_TEMP_FALL 0x54 55 #define EXYNOS_EMUL_CON 0x80 56 57 #define EXYNOS_TRIMINFO_RELOAD_ENABLE 1 58 #define EXYNOS_TRIMINFO_25_SHIFT 0 59 #define EXYNOS_TRIMINFO_85_SHIFT 8 60 #define EXYNOS_TMU_TRIP_MODE_SHIFT 13 61 #define EXYNOS_TMU_TRIP_MODE_MASK 0x7 62 #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12 63 64 #define EXYNOS_TMU_INTEN_RISE0_SHIFT 0 65 #define EXYNOS_TMU_INTEN_FALL0_SHIFT 16 66 67 #define EXYNOS_EMUL_TIME 0x57F0 68 #define EXYNOS_EMUL_TIME_MASK 0xffff 69 #define EXYNOS_EMUL_TIME_SHIFT 16 70 #define EXYNOS_EMUL_DATA_SHIFT 8 71 #define EXYNOS_EMUL_DATA_MASK 0xFF 72 #define EXYNOS_EMUL_ENABLE 0x1 73 74 /* Exynos5260 specific */ 75 #define EXYNOS5260_TMU_REG_INTEN 0xC0 76 #define EXYNOS5260_TMU_REG_INTSTAT 0xC4 77 #define EXYNOS5260_TMU_REG_INTCLEAR 0xC8 78 #define EXYNOS5260_EMUL_CON 0x100 79 80 /* Exynos4412 specific */ 81 #define EXYNOS4412_MUX_ADDR_VALUE 6 82 #define EXYNOS4412_MUX_ADDR_SHIFT 20 83 84 /* Exynos5433 specific registers */ 85 #define EXYNOS5433_THD_TEMP_RISE3_0 0x050 86 #define EXYNOS5433_THD_TEMP_RISE7_4 0x054 87 #define EXYNOS5433_THD_TEMP_FALL3_0 0x060 88 #define EXYNOS5433_THD_TEMP_FALL7_4 0x064 89 #define EXYNOS5433_TMU_REG_INTEN 0x0c0 90 #define EXYNOS5433_TMU_REG_INTPEND 0x0c8 91 #define EXYNOS5433_TMU_EMUL_CON 0x110 92 #define EXYNOS5433_TMU_PD_DET_EN 0x130 93 94 #define EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT 16 95 #define EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT 23 96 #define EXYNOS5433_TRIMINFO_SENSOR_ID_MASK \ 97 (0xf << EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT) 98 #define EXYNOS5433_TRIMINFO_CALIB_SEL_MASK BIT(23) 99 100 #define EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING 0 101 #define EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING 1 102 103 #define EXYNOS5433_PD_DET_EN 1 104 105 #define EXYNOS5433_G3D_BASE 0x10070000 106 107 /* Exynos7 specific registers */ 108 #define EXYNOS7_THD_TEMP_RISE7_6 0x50 109 #define EXYNOS7_THD_TEMP_FALL7_6 0x60 110 #define EXYNOS7_TMU_REG_INTEN 0x110 111 #define EXYNOS7_TMU_REG_INTPEND 0x118 112 #define EXYNOS7_TMU_REG_EMUL_CON 0x160 113 114 #define EXYNOS7_TMU_TEMP_MASK 0x1ff 115 #define EXYNOS7_PD_DET_EN_SHIFT 23 116 #define EXYNOS7_TMU_INTEN_RISE0_SHIFT 0 117 #define EXYNOS7_EMUL_DATA_SHIFT 7 118 #define EXYNOS7_EMUL_DATA_MASK 0x1ff 119 120 #define EXYNOS_FIRST_POINT_TRIM 25 121 #define EXYNOS_SECOND_POINT_TRIM 85 122 123 #define EXYNOS_NOISE_CANCEL_MODE 4 124 125 #define MCELSIUS 1000 126 127 enum soc_type { 128 SOC_ARCH_EXYNOS3250 = 1, 129 SOC_ARCH_EXYNOS4210, 130 SOC_ARCH_EXYNOS4412, 131 SOC_ARCH_EXYNOS5250, 132 SOC_ARCH_EXYNOS5260, 133 SOC_ARCH_EXYNOS5420, 134 SOC_ARCH_EXYNOS5420_TRIMINFO, 135 SOC_ARCH_EXYNOS5433, 136 SOC_ARCH_EXYNOS7, 137 }; 138 139 /** 140 * struct exynos_tmu_data : A structure to hold the private data of the TMU 141 * driver 142 * @id: identifier of the one instance of the TMU controller. 143 * @base: base address of the single instance of the TMU controller. 144 * @base_second: base address of the common registers of the TMU controller. 145 * @irq: irq number of the TMU controller. 146 * @soc: id of the SOC type. 147 * @irq_work: pointer to the irq work structure. 148 * @lock: lock to implement synchronization. 149 * @clk: pointer to the clock structure. 150 * @clk_sec: pointer to the clock structure for accessing the base_second. 151 * @sclk: pointer to the clock structure for accessing the tmu special clk. 152 * @cal_type: calibration type for temperature 153 * @efuse_value: SoC defined fuse value 154 * @min_efuse_value: minimum valid trimming data 155 * @max_efuse_value: maximum valid trimming data 156 * @temp_error1: fused value of the first point trim. 157 * @temp_error2: fused value of the second point trim. 158 * @gain: gain of amplifier in the positive-TC generator block 159 * 0 < gain <= 15 160 * @reference_voltage: reference voltage of amplifier 161 * in the positive-TC generator block 162 * 0 < reference_voltage <= 31 163 * @regulator: pointer to the TMU regulator structure. 164 * @reg_conf: pointer to structure to register with core thermal. 165 * @tzd: pointer to thermal_zone_device structure 166 * @ntrip: number of supported trip points. 167 * @enabled: current status of TMU device 168 * @tmu_set_trip_temp: SoC specific method to set trip (rising threshold) 169 * @tmu_set_trip_hyst: SoC specific to set hysteresis (falling threshold) 170 * @tmu_initialize: SoC specific TMU initialization method 171 * @tmu_control: SoC specific TMU control method 172 * @tmu_read: SoC specific TMU temperature read method 173 * @tmu_set_emulation: SoC specific TMU emulation setting method 174 * @tmu_clear_irqs: SoC specific TMU interrupts clearing method 175 */ 176 struct exynos_tmu_data { 177 int id; 178 void __iomem *base; 179 void __iomem *base_second; 180 int irq; 181 enum soc_type soc; 182 struct work_struct irq_work; 183 struct mutex lock; 184 struct clk *clk, *clk_sec, *sclk; 185 u32 cal_type; 186 u32 efuse_value; 187 u32 min_efuse_value; 188 u32 max_efuse_value; 189 u16 temp_error1, temp_error2; 190 u8 gain; 191 u8 reference_voltage; 192 struct regulator *regulator; 193 struct thermal_zone_device *tzd; 194 unsigned int ntrip; 195 bool enabled; 196 197 void (*tmu_set_trip_temp)(struct exynos_tmu_data *data, int trip, 198 u8 temp); 199 void (*tmu_set_trip_hyst)(struct exynos_tmu_data *data, int trip, 200 u8 temp, u8 hyst); 201 void (*tmu_initialize)(struct platform_device *pdev); 202 void (*tmu_control)(struct platform_device *pdev, bool on); 203 int (*tmu_read)(struct exynos_tmu_data *data); 204 void (*tmu_set_emulation)(struct exynos_tmu_data *data, int temp); 205 void (*tmu_clear_irqs)(struct exynos_tmu_data *data); 206 }; 207 208 /* 209 * TMU treats temperature as a mapped temperature code. 210 * The temperature is converted differently depending on the calibration type. 211 */ 212 static int temp_to_code(struct exynos_tmu_data *data, u8 temp) 213 { 214 if (data->cal_type == TYPE_ONE_POINT_TRIMMING) 215 return temp + data->temp_error1 - EXYNOS_FIRST_POINT_TRIM; 216 217 return (temp - EXYNOS_FIRST_POINT_TRIM) * 218 (data->temp_error2 - data->temp_error1) / 219 (EXYNOS_SECOND_POINT_TRIM - EXYNOS_FIRST_POINT_TRIM) + 220 data->temp_error1; 221 } 222 223 /* 224 * Calculate a temperature value from a temperature code. 225 * The unit of the temperature is degree Celsius. 226 */ 227 static int code_to_temp(struct exynos_tmu_data *data, u16 temp_code) 228 { 229 if (data->cal_type == TYPE_ONE_POINT_TRIMMING) 230 return temp_code - data->temp_error1 + EXYNOS_FIRST_POINT_TRIM; 231 232 return (temp_code - data->temp_error1) * 233 (EXYNOS_SECOND_POINT_TRIM - EXYNOS_FIRST_POINT_TRIM) / 234 (data->temp_error2 - data->temp_error1) + 235 EXYNOS_FIRST_POINT_TRIM; 236 } 237 238 static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info) 239 { 240 u16 tmu_temp_mask = 241 (data->soc == SOC_ARCH_EXYNOS7) ? EXYNOS7_TMU_TEMP_MASK 242 : EXYNOS_TMU_TEMP_MASK; 243 244 data->temp_error1 = trim_info & tmu_temp_mask; 245 data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) & 246 EXYNOS_TMU_TEMP_MASK); 247 248 if (!data->temp_error1 || 249 (data->min_efuse_value > data->temp_error1) || 250 (data->temp_error1 > data->max_efuse_value)) 251 data->temp_error1 = data->efuse_value & EXYNOS_TMU_TEMP_MASK; 252 253 if (!data->temp_error2) 254 data->temp_error2 = 255 (data->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) & 256 EXYNOS_TMU_TEMP_MASK; 257 } 258 259 static int exynos_tmu_initialize(struct platform_device *pdev) 260 { 261 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 262 struct thermal_zone_device *tzd = data->tzd; 263 const struct thermal_trip * const trips = 264 of_thermal_get_trip_points(tzd); 265 unsigned int status; 266 int ret = 0, temp, hyst; 267 268 if (!trips) { 269 dev_err(&pdev->dev, 270 "Cannot get trip points from device tree!\n"); 271 return -ENODEV; 272 } 273 274 if (data->soc != SOC_ARCH_EXYNOS5433) /* FIXME */ 275 ret = tzd->ops->get_crit_temp(tzd, &temp); 276 if (ret) { 277 dev_err(&pdev->dev, 278 "No CRITICAL trip point defined in device tree!\n"); 279 goto out; 280 } 281 282 if (of_thermal_get_ntrips(tzd) > data->ntrip) { 283 dev_info(&pdev->dev, 284 "More trip points than supported by this TMU.\n"); 285 dev_info(&pdev->dev, 286 "%d trip points should be configured in polling mode.\n", 287 (of_thermal_get_ntrips(tzd) - data->ntrip)); 288 } 289 290 mutex_lock(&data->lock); 291 clk_enable(data->clk); 292 if (!IS_ERR(data->clk_sec)) 293 clk_enable(data->clk_sec); 294 295 status = readb(data->base + EXYNOS_TMU_REG_STATUS); 296 if (!status) { 297 ret = -EBUSY; 298 } else { 299 int i, ntrips = 300 min_t(int, of_thermal_get_ntrips(tzd), data->ntrip); 301 302 data->tmu_initialize(pdev); 303 304 /* Write temperature code for rising and falling threshold */ 305 for (i = 0; i < ntrips; i++) { 306 /* Write temperature code for rising threshold */ 307 ret = tzd->ops->get_trip_temp(tzd, i, &temp); 308 if (ret) 309 goto err; 310 temp /= MCELSIUS; 311 data->tmu_set_trip_temp(data, i, temp); 312 313 /* Write temperature code for falling threshold */ 314 ret = tzd->ops->get_trip_hyst(tzd, i, &hyst); 315 if (ret) 316 goto err; 317 hyst /= MCELSIUS; 318 data->tmu_set_trip_hyst(data, i, temp, hyst); 319 } 320 321 data->tmu_clear_irqs(data); 322 } 323 err: 324 clk_disable(data->clk); 325 mutex_unlock(&data->lock); 326 if (!IS_ERR(data->clk_sec)) 327 clk_disable(data->clk_sec); 328 out: 329 return ret; 330 } 331 332 static u32 get_con_reg(struct exynos_tmu_data *data, u32 con) 333 { 334 if (data->soc == SOC_ARCH_EXYNOS4412 || 335 data->soc == SOC_ARCH_EXYNOS3250) 336 con |= (EXYNOS4412_MUX_ADDR_VALUE << EXYNOS4412_MUX_ADDR_SHIFT); 337 338 con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT); 339 con |= data->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT; 340 341 con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); 342 con |= (data->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); 343 344 con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT); 345 con |= (EXYNOS_NOISE_CANCEL_MODE << EXYNOS_TMU_TRIP_MODE_SHIFT); 346 347 return con; 348 } 349 350 static void exynos_tmu_control(struct platform_device *pdev, bool on) 351 { 352 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 353 354 mutex_lock(&data->lock); 355 clk_enable(data->clk); 356 data->tmu_control(pdev, on); 357 data->enabled = on; 358 clk_disable(data->clk); 359 mutex_unlock(&data->lock); 360 } 361 362 static void exynos4210_tmu_set_trip_temp(struct exynos_tmu_data *data, 363 int trip, u8 temp) 364 { 365 const struct thermal_trip * const trips = 366 of_thermal_get_trip_points(data->tzd); 367 u8 ref, th_code; 368 369 ref = trips[0].temperature / MCELSIUS; 370 371 if (trip == 0) { 372 th_code = temp_to_code(data, ref); 373 writeb(th_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP); 374 } 375 376 temp -= ref; 377 writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip * 4); 378 } 379 380 /* failing thresholds are not supported on Exynos4210 */ 381 static void exynos4210_tmu_set_trip_hyst(struct exynos_tmu_data *data, 382 int trip, u8 temp, u8 hyst) 383 { 384 } 385 386 static void exynos4210_tmu_initialize(struct platform_device *pdev) 387 { 388 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 389 390 sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO)); 391 } 392 393 static void exynos4412_tmu_set_trip_temp(struct exynos_tmu_data *data, 394 int trip, u8 temp) 395 { 396 u32 th, con; 397 398 th = readl(data->base + EXYNOS_THD_TEMP_RISE); 399 th &= ~(0xff << 8 * trip); 400 th |= temp_to_code(data, temp) << 8 * trip; 401 writel(th, data->base + EXYNOS_THD_TEMP_RISE); 402 403 if (trip == 3) { 404 con = readl(data->base + EXYNOS_TMU_REG_CONTROL); 405 con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT); 406 writel(con, data->base + EXYNOS_TMU_REG_CONTROL); 407 } 408 } 409 410 static void exynos4412_tmu_set_trip_hyst(struct exynos_tmu_data *data, 411 int trip, u8 temp, u8 hyst) 412 { 413 u32 th; 414 415 th = readl(data->base + EXYNOS_THD_TEMP_FALL); 416 th &= ~(0xff << 8 * trip); 417 if (hyst) 418 th |= temp_to_code(data, temp - hyst) << 8 * trip; 419 writel(th, data->base + EXYNOS_THD_TEMP_FALL); 420 } 421 422 static void exynos4412_tmu_initialize(struct platform_device *pdev) 423 { 424 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 425 unsigned int trim_info, ctrl; 426 427 if (data->soc == SOC_ARCH_EXYNOS3250 || 428 data->soc == SOC_ARCH_EXYNOS4412 || 429 data->soc == SOC_ARCH_EXYNOS5250) { 430 if (data->soc == SOC_ARCH_EXYNOS3250) { 431 ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON1); 432 ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE; 433 writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON1); 434 } 435 ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON2); 436 ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE; 437 writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON2); 438 } 439 440 /* On exynos5420 the triminfo register is in the shared space */ 441 if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) 442 trim_info = readl(data->base_second + EXYNOS_TMU_REG_TRIMINFO); 443 else 444 trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); 445 446 sanitize_temp_error(data, trim_info); 447 } 448 449 static void exynos5433_tmu_set_trip_temp(struct exynos_tmu_data *data, 450 int trip, u8 temp) 451 { 452 unsigned int reg_off, j; 453 u32 th; 454 455 if (trip > 3) { 456 reg_off = EXYNOS5433_THD_TEMP_RISE7_4; 457 j = trip - 4; 458 } else { 459 reg_off = EXYNOS5433_THD_TEMP_RISE3_0; 460 j = trip; 461 } 462 463 th = readl(data->base + reg_off); 464 th &= ~(0xff << j * 8); 465 th |= (temp_to_code(data, temp) << j * 8); 466 writel(th, data->base + reg_off); 467 } 468 469 static void exynos5433_tmu_set_trip_hyst(struct exynos_tmu_data *data, 470 int trip, u8 temp, u8 hyst) 471 { 472 unsigned int reg_off, j; 473 u32 th; 474 475 if (trip > 3) { 476 reg_off = EXYNOS5433_THD_TEMP_FALL7_4; 477 j = trip - 4; 478 } else { 479 reg_off = EXYNOS5433_THD_TEMP_FALL3_0; 480 j = trip; 481 } 482 483 th = readl(data->base + reg_off); 484 th &= ~(0xff << j * 8); 485 th |= (temp_to_code(data, temp - hyst) << j * 8); 486 writel(th, data->base + reg_off); 487 } 488 489 static void exynos5433_tmu_initialize(struct platform_device *pdev) 490 { 491 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 492 unsigned int trim_info; 493 int sensor_id, cal_type; 494 495 trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); 496 sanitize_temp_error(data, trim_info); 497 498 /* Read the temperature sensor id */ 499 sensor_id = (trim_info & EXYNOS5433_TRIMINFO_SENSOR_ID_MASK) 500 >> EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT; 501 dev_info(&pdev->dev, "Temperature sensor ID: 0x%x\n", sensor_id); 502 503 /* Read the calibration mode */ 504 writel(trim_info, data->base + EXYNOS_TMU_REG_TRIMINFO); 505 cal_type = (trim_info & EXYNOS5433_TRIMINFO_CALIB_SEL_MASK) 506 >> EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT; 507 508 switch (cal_type) { 509 case EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING: 510 data->cal_type = TYPE_TWO_POINT_TRIMMING; 511 break; 512 case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING: 513 default: 514 data->cal_type = TYPE_ONE_POINT_TRIMMING; 515 break; 516 } 517 518 dev_info(&pdev->dev, "Calibration type is %d-point calibration\n", 519 cal_type ? 2 : 1); 520 } 521 522 static void exynos7_tmu_set_trip_temp(struct exynos_tmu_data *data, 523 int trip, u8 temp) 524 { 525 unsigned int reg_off, bit_off; 526 u32 th; 527 528 reg_off = ((7 - trip) / 2) * 4; 529 bit_off = ((8 - trip) % 2); 530 531 th = readl(data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off); 532 th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off)); 533 th |= temp_to_code(data, temp) << (16 * bit_off); 534 writel(th, data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off); 535 } 536 537 static void exynos7_tmu_set_trip_hyst(struct exynos_tmu_data *data, 538 int trip, u8 temp, u8 hyst) 539 { 540 unsigned int reg_off, bit_off; 541 u32 th; 542 543 reg_off = ((7 - trip) / 2) * 4; 544 bit_off = ((8 - trip) % 2); 545 546 th = readl(data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off); 547 th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off)); 548 th |= temp_to_code(data, temp - hyst) << (16 * bit_off); 549 writel(th, data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off); 550 } 551 552 static void exynos7_tmu_initialize(struct platform_device *pdev) 553 { 554 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 555 unsigned int trim_info; 556 557 trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); 558 sanitize_temp_error(data, trim_info); 559 } 560 561 static void exynos4210_tmu_control(struct platform_device *pdev, bool on) 562 { 563 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 564 struct thermal_zone_device *tz = data->tzd; 565 unsigned int con, interrupt_en = 0, i; 566 567 con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); 568 569 if (on) { 570 for (i = 0; i < data->ntrip; i++) { 571 if (!of_thermal_is_trip_valid(tz, i)) 572 continue; 573 574 interrupt_en |= 575 (1 << (EXYNOS_TMU_INTEN_RISE0_SHIFT + i * 4)); 576 } 577 578 if (data->soc != SOC_ARCH_EXYNOS4210) 579 interrupt_en |= 580 interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; 581 582 con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); 583 } else { 584 con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); 585 } 586 587 writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN); 588 writel(con, data->base + EXYNOS_TMU_REG_CONTROL); 589 } 590 591 static void exynos5433_tmu_control(struct platform_device *pdev, bool on) 592 { 593 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 594 struct thermal_zone_device *tz = data->tzd; 595 unsigned int con, interrupt_en = 0, pd_det_en, i; 596 597 con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); 598 599 if (on) { 600 for (i = 0; i < data->ntrip; i++) { 601 if (!of_thermal_is_trip_valid(tz, i)) 602 continue; 603 604 interrupt_en |= 605 (1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i)); 606 } 607 608 interrupt_en |= 609 interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; 610 611 con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); 612 } else 613 con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); 614 615 pd_det_en = on ? EXYNOS5433_PD_DET_EN : 0; 616 617 writel(pd_det_en, data->base + EXYNOS5433_TMU_PD_DET_EN); 618 writel(interrupt_en, data->base + EXYNOS5433_TMU_REG_INTEN); 619 writel(con, data->base + EXYNOS_TMU_REG_CONTROL); 620 } 621 622 static void exynos7_tmu_control(struct platform_device *pdev, bool on) 623 { 624 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 625 struct thermal_zone_device *tz = data->tzd; 626 unsigned int con, interrupt_en = 0, i; 627 628 con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); 629 630 if (on) { 631 for (i = 0; i < data->ntrip; i++) { 632 if (!of_thermal_is_trip_valid(tz, i)) 633 continue; 634 635 interrupt_en |= 636 (1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i)); 637 } 638 639 interrupt_en |= 640 interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; 641 642 con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); 643 con |= (1 << EXYNOS7_PD_DET_EN_SHIFT); 644 } else { 645 con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); 646 con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT); 647 } 648 649 writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN); 650 writel(con, data->base + EXYNOS_TMU_REG_CONTROL); 651 } 652 653 static int exynos_get_temp(struct thermal_zone_device *tz, int *temp) 654 { 655 struct exynos_tmu_data *data = tz->devdata; 656 int value, ret = 0; 657 658 if (!data || !data->tmu_read) 659 return -EINVAL; 660 else if (!data->enabled) 661 /* 662 * Called too early, probably 663 * from thermal_zone_of_sensor_register(). 664 */ 665 return -EAGAIN; 666 667 mutex_lock(&data->lock); 668 clk_enable(data->clk); 669 670 value = data->tmu_read(data); 671 if (value < 0) 672 ret = value; 673 else 674 *temp = code_to_temp(data, value) * MCELSIUS; 675 676 clk_disable(data->clk); 677 mutex_unlock(&data->lock); 678 679 return ret; 680 } 681 682 #ifdef CONFIG_THERMAL_EMULATION 683 static u32 get_emul_con_reg(struct exynos_tmu_data *data, unsigned int val, 684 int temp) 685 { 686 if (temp) { 687 temp /= MCELSIUS; 688 689 val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT); 690 val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT); 691 if (data->soc == SOC_ARCH_EXYNOS7) { 692 val &= ~(EXYNOS7_EMUL_DATA_MASK << 693 EXYNOS7_EMUL_DATA_SHIFT); 694 val |= (temp_to_code(data, temp) << 695 EXYNOS7_EMUL_DATA_SHIFT) | 696 EXYNOS_EMUL_ENABLE; 697 } else { 698 val &= ~(EXYNOS_EMUL_DATA_MASK << 699 EXYNOS_EMUL_DATA_SHIFT); 700 val |= (temp_to_code(data, temp) << 701 EXYNOS_EMUL_DATA_SHIFT) | 702 EXYNOS_EMUL_ENABLE; 703 } 704 } else { 705 val &= ~EXYNOS_EMUL_ENABLE; 706 } 707 708 return val; 709 } 710 711 static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data, 712 int temp) 713 { 714 unsigned int val; 715 u32 emul_con; 716 717 if (data->soc == SOC_ARCH_EXYNOS5260) 718 emul_con = EXYNOS5260_EMUL_CON; 719 else if (data->soc == SOC_ARCH_EXYNOS5433) 720 emul_con = EXYNOS5433_TMU_EMUL_CON; 721 else if (data->soc == SOC_ARCH_EXYNOS7) 722 emul_con = EXYNOS7_TMU_REG_EMUL_CON; 723 else 724 emul_con = EXYNOS_EMUL_CON; 725 726 val = readl(data->base + emul_con); 727 val = get_emul_con_reg(data, val, temp); 728 writel(val, data->base + emul_con); 729 } 730 731 static int exynos_tmu_set_emulation(struct thermal_zone_device *tz, int temp) 732 { 733 struct exynos_tmu_data *data = tz->devdata; 734 int ret = -EINVAL; 735 736 if (data->soc == SOC_ARCH_EXYNOS4210) 737 goto out; 738 739 if (temp && temp < MCELSIUS) 740 goto out; 741 742 mutex_lock(&data->lock); 743 clk_enable(data->clk); 744 data->tmu_set_emulation(data, temp); 745 clk_disable(data->clk); 746 mutex_unlock(&data->lock); 747 return 0; 748 out: 749 return ret; 750 } 751 #else 752 #define exynos4412_tmu_set_emulation NULL 753 static int exynos_tmu_set_emulation(struct thermal_zone_device *tz, int temp) 754 { return -EINVAL; } 755 #endif /* CONFIG_THERMAL_EMULATION */ 756 757 static int exynos4210_tmu_read(struct exynos_tmu_data *data) 758 { 759 int ret = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP); 760 761 /* "temp_code" should range between 75 and 175 */ 762 return (ret < 75 || ret > 175) ? -ENODATA : ret; 763 } 764 765 static int exynos4412_tmu_read(struct exynos_tmu_data *data) 766 { 767 return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP); 768 } 769 770 static int exynos7_tmu_read(struct exynos_tmu_data *data) 771 { 772 return readw(data->base + EXYNOS_TMU_REG_CURRENT_TEMP) & 773 EXYNOS7_TMU_TEMP_MASK; 774 } 775 776 static void exynos_tmu_work(struct work_struct *work) 777 { 778 struct exynos_tmu_data *data = container_of(work, 779 struct exynos_tmu_data, irq_work); 780 781 thermal_zone_device_update(data->tzd, THERMAL_EVENT_UNSPECIFIED); 782 783 mutex_lock(&data->lock); 784 clk_enable(data->clk); 785 786 /* TODO: take action based on particular interrupt */ 787 data->tmu_clear_irqs(data); 788 789 clk_disable(data->clk); 790 mutex_unlock(&data->lock); 791 enable_irq(data->irq); 792 } 793 794 static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data) 795 { 796 unsigned int val_irq; 797 u32 tmu_intstat, tmu_intclear; 798 799 if (data->soc == SOC_ARCH_EXYNOS5260) { 800 tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT; 801 tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR; 802 } else if (data->soc == SOC_ARCH_EXYNOS7) { 803 tmu_intstat = EXYNOS7_TMU_REG_INTPEND; 804 tmu_intclear = EXYNOS7_TMU_REG_INTPEND; 805 } else if (data->soc == SOC_ARCH_EXYNOS5433) { 806 tmu_intstat = EXYNOS5433_TMU_REG_INTPEND; 807 tmu_intclear = EXYNOS5433_TMU_REG_INTPEND; 808 } else { 809 tmu_intstat = EXYNOS_TMU_REG_INTSTAT; 810 tmu_intclear = EXYNOS_TMU_REG_INTCLEAR; 811 } 812 813 val_irq = readl(data->base + tmu_intstat); 814 /* 815 * Clear the interrupts. Please note that the documentation for 816 * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly 817 * states that INTCLEAR register has a different placing of bits 818 * responsible for FALL IRQs than INTSTAT register. Exynos5420 819 * and Exynos5440 documentation is correct (Exynos4210 doesn't 820 * support FALL IRQs at all). 821 */ 822 writel(val_irq, data->base + tmu_intclear); 823 } 824 825 static irqreturn_t exynos_tmu_irq(int irq, void *id) 826 { 827 struct exynos_tmu_data *data = id; 828 829 disable_irq_nosync(irq); 830 schedule_work(&data->irq_work); 831 832 return IRQ_HANDLED; 833 } 834 835 static const struct of_device_id exynos_tmu_match[] = { 836 { 837 .compatible = "samsung,exynos3250-tmu", 838 .data = (const void *)SOC_ARCH_EXYNOS3250, 839 }, { 840 .compatible = "samsung,exynos4210-tmu", 841 .data = (const void *)SOC_ARCH_EXYNOS4210, 842 }, { 843 .compatible = "samsung,exynos4412-tmu", 844 .data = (const void *)SOC_ARCH_EXYNOS4412, 845 }, { 846 .compatible = "samsung,exynos5250-tmu", 847 .data = (const void *)SOC_ARCH_EXYNOS5250, 848 }, { 849 .compatible = "samsung,exynos5260-tmu", 850 .data = (const void *)SOC_ARCH_EXYNOS5260, 851 }, { 852 .compatible = "samsung,exynos5420-tmu", 853 .data = (const void *)SOC_ARCH_EXYNOS5420, 854 }, { 855 .compatible = "samsung,exynos5420-tmu-ext-triminfo", 856 .data = (const void *)SOC_ARCH_EXYNOS5420_TRIMINFO, 857 }, { 858 .compatible = "samsung,exynos5433-tmu", 859 .data = (const void *)SOC_ARCH_EXYNOS5433, 860 }, { 861 .compatible = "samsung,exynos7-tmu", 862 .data = (const void *)SOC_ARCH_EXYNOS7, 863 }, 864 { }, 865 }; 866 MODULE_DEVICE_TABLE(of, exynos_tmu_match); 867 868 static int exynos_map_dt_data(struct platform_device *pdev) 869 { 870 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 871 struct resource res; 872 873 if (!data || !pdev->dev.of_node) 874 return -ENODEV; 875 876 data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl"); 877 if (data->id < 0) 878 data->id = 0; 879 880 data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0); 881 if (data->irq <= 0) { 882 dev_err(&pdev->dev, "failed to get IRQ\n"); 883 return -ENODEV; 884 } 885 886 if (of_address_to_resource(pdev->dev.of_node, 0, &res)) { 887 dev_err(&pdev->dev, "failed to get Resource 0\n"); 888 return -ENODEV; 889 } 890 891 data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res)); 892 if (!data->base) { 893 dev_err(&pdev->dev, "Failed to ioremap memory\n"); 894 return -EADDRNOTAVAIL; 895 } 896 897 data->soc = (enum soc_type)of_device_get_match_data(&pdev->dev); 898 899 switch (data->soc) { 900 case SOC_ARCH_EXYNOS4210: 901 data->tmu_set_trip_temp = exynos4210_tmu_set_trip_temp; 902 data->tmu_set_trip_hyst = exynos4210_tmu_set_trip_hyst; 903 data->tmu_initialize = exynos4210_tmu_initialize; 904 data->tmu_control = exynos4210_tmu_control; 905 data->tmu_read = exynos4210_tmu_read; 906 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; 907 data->ntrip = 4; 908 data->gain = 15; 909 data->reference_voltage = 7; 910 data->efuse_value = 55; 911 data->min_efuse_value = 40; 912 data->max_efuse_value = 100; 913 break; 914 case SOC_ARCH_EXYNOS3250: 915 case SOC_ARCH_EXYNOS4412: 916 case SOC_ARCH_EXYNOS5250: 917 case SOC_ARCH_EXYNOS5260: 918 case SOC_ARCH_EXYNOS5420: 919 case SOC_ARCH_EXYNOS5420_TRIMINFO: 920 data->tmu_set_trip_temp = exynos4412_tmu_set_trip_temp; 921 data->tmu_set_trip_hyst = exynos4412_tmu_set_trip_hyst; 922 data->tmu_initialize = exynos4412_tmu_initialize; 923 data->tmu_control = exynos4210_tmu_control; 924 data->tmu_read = exynos4412_tmu_read; 925 data->tmu_set_emulation = exynos4412_tmu_set_emulation; 926 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; 927 data->ntrip = 4; 928 data->gain = 8; 929 data->reference_voltage = 16; 930 data->efuse_value = 55; 931 if (data->soc != SOC_ARCH_EXYNOS5420 && 932 data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO) 933 data->min_efuse_value = 40; 934 else 935 data->min_efuse_value = 0; 936 data->max_efuse_value = 100; 937 break; 938 case SOC_ARCH_EXYNOS5433: 939 data->tmu_set_trip_temp = exynos5433_tmu_set_trip_temp; 940 data->tmu_set_trip_hyst = exynos5433_tmu_set_trip_hyst; 941 data->tmu_initialize = exynos5433_tmu_initialize; 942 data->tmu_control = exynos5433_tmu_control; 943 data->tmu_read = exynos4412_tmu_read; 944 data->tmu_set_emulation = exynos4412_tmu_set_emulation; 945 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; 946 data->ntrip = 8; 947 data->gain = 8; 948 if (res.start == EXYNOS5433_G3D_BASE) 949 data->reference_voltage = 23; 950 else 951 data->reference_voltage = 16; 952 data->efuse_value = 75; 953 data->min_efuse_value = 40; 954 data->max_efuse_value = 150; 955 break; 956 case SOC_ARCH_EXYNOS7: 957 data->tmu_set_trip_temp = exynos7_tmu_set_trip_temp; 958 data->tmu_set_trip_hyst = exynos7_tmu_set_trip_hyst; 959 data->tmu_initialize = exynos7_tmu_initialize; 960 data->tmu_control = exynos7_tmu_control; 961 data->tmu_read = exynos7_tmu_read; 962 data->tmu_set_emulation = exynos4412_tmu_set_emulation; 963 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; 964 data->ntrip = 8; 965 data->gain = 9; 966 data->reference_voltage = 17; 967 data->efuse_value = 75; 968 data->min_efuse_value = 15; 969 data->max_efuse_value = 100; 970 break; 971 default: 972 dev_err(&pdev->dev, "Platform not supported\n"); 973 return -EINVAL; 974 } 975 976 data->cal_type = TYPE_ONE_POINT_TRIMMING; 977 978 /* 979 * Check if the TMU shares some registers and then try to map the 980 * memory of common registers. 981 */ 982 if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO) 983 return 0; 984 985 if (of_address_to_resource(pdev->dev.of_node, 1, &res)) { 986 dev_err(&pdev->dev, "failed to get Resource 1\n"); 987 return -ENODEV; 988 } 989 990 data->base_second = devm_ioremap(&pdev->dev, res.start, 991 resource_size(&res)); 992 if (!data->base_second) { 993 dev_err(&pdev->dev, "Failed to ioremap memory\n"); 994 return -ENOMEM; 995 } 996 997 return 0; 998 } 999 1000 static const struct thermal_zone_device_ops exynos_sensor_ops = { 1001 .get_temp = exynos_get_temp, 1002 .set_emul_temp = exynos_tmu_set_emulation, 1003 }; 1004 1005 static int exynos_tmu_probe(struct platform_device *pdev) 1006 { 1007 struct exynos_tmu_data *data; 1008 int ret; 1009 1010 data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data), 1011 GFP_KERNEL); 1012 if (!data) 1013 return -ENOMEM; 1014 1015 platform_set_drvdata(pdev, data); 1016 mutex_init(&data->lock); 1017 1018 /* 1019 * Try enabling the regulator if found 1020 * TODO: Add regulator as an SOC feature, so that regulator enable 1021 * is a compulsory call. 1022 */ 1023 data->regulator = devm_regulator_get_optional(&pdev->dev, "vtmu"); 1024 if (!IS_ERR(data->regulator)) { 1025 ret = regulator_enable(data->regulator); 1026 if (ret) { 1027 dev_err(&pdev->dev, "failed to enable vtmu\n"); 1028 return ret; 1029 } 1030 } else { 1031 if (PTR_ERR(data->regulator) == -EPROBE_DEFER) 1032 return -EPROBE_DEFER; 1033 dev_info(&pdev->dev, "Regulator node (vtmu) not found\n"); 1034 } 1035 1036 ret = exynos_map_dt_data(pdev); 1037 if (ret) 1038 goto err_sensor; 1039 1040 INIT_WORK(&data->irq_work, exynos_tmu_work); 1041 1042 data->clk = devm_clk_get(&pdev->dev, "tmu_apbif"); 1043 if (IS_ERR(data->clk)) { 1044 dev_err(&pdev->dev, "Failed to get clock\n"); 1045 ret = PTR_ERR(data->clk); 1046 goto err_sensor; 1047 } 1048 1049 data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif"); 1050 if (IS_ERR(data->clk_sec)) { 1051 if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) { 1052 dev_err(&pdev->dev, "Failed to get triminfo clock\n"); 1053 ret = PTR_ERR(data->clk_sec); 1054 goto err_sensor; 1055 } 1056 } else { 1057 ret = clk_prepare(data->clk_sec); 1058 if (ret) { 1059 dev_err(&pdev->dev, "Failed to get clock\n"); 1060 goto err_sensor; 1061 } 1062 } 1063 1064 ret = clk_prepare(data->clk); 1065 if (ret) { 1066 dev_err(&pdev->dev, "Failed to get clock\n"); 1067 goto err_clk_sec; 1068 } 1069 1070 switch (data->soc) { 1071 case SOC_ARCH_EXYNOS5433: 1072 case SOC_ARCH_EXYNOS7: 1073 data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk"); 1074 if (IS_ERR(data->sclk)) { 1075 dev_err(&pdev->dev, "Failed to get sclk\n"); 1076 ret = PTR_ERR(data->sclk); 1077 goto err_clk; 1078 } else { 1079 ret = clk_prepare_enable(data->sclk); 1080 if (ret) { 1081 dev_err(&pdev->dev, "Failed to enable sclk\n"); 1082 goto err_clk; 1083 } 1084 } 1085 break; 1086 default: 1087 break; 1088 } 1089 1090 /* 1091 * data->tzd must be registered before calling exynos_tmu_initialize(), 1092 * requesting irq and calling exynos_tmu_control(). 1093 */ 1094 data->tzd = devm_thermal_of_zone_register(&pdev->dev, 0, data, 1095 &exynos_sensor_ops); 1096 if (IS_ERR(data->tzd)) { 1097 ret = PTR_ERR(data->tzd); 1098 if (ret != -EPROBE_DEFER) 1099 dev_err(&pdev->dev, "Failed to register sensor: %d\n", 1100 ret); 1101 goto err_sclk; 1102 } 1103 1104 ret = exynos_tmu_initialize(pdev); 1105 if (ret) { 1106 dev_err(&pdev->dev, "Failed to initialize TMU\n"); 1107 goto err_sclk; 1108 } 1109 1110 ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq, 1111 IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data); 1112 if (ret) { 1113 dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); 1114 goto err_sclk; 1115 } 1116 1117 exynos_tmu_control(pdev, true); 1118 return 0; 1119 1120 err_sclk: 1121 clk_disable_unprepare(data->sclk); 1122 err_clk: 1123 clk_unprepare(data->clk); 1124 err_clk_sec: 1125 if (!IS_ERR(data->clk_sec)) 1126 clk_unprepare(data->clk_sec); 1127 err_sensor: 1128 if (!IS_ERR(data->regulator)) 1129 regulator_disable(data->regulator); 1130 1131 return ret; 1132 } 1133 1134 static int exynos_tmu_remove(struct platform_device *pdev) 1135 { 1136 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 1137 1138 exynos_tmu_control(pdev, false); 1139 1140 clk_disable_unprepare(data->sclk); 1141 clk_unprepare(data->clk); 1142 if (!IS_ERR(data->clk_sec)) 1143 clk_unprepare(data->clk_sec); 1144 1145 if (!IS_ERR(data->regulator)) 1146 regulator_disable(data->regulator); 1147 1148 return 0; 1149 } 1150 1151 #ifdef CONFIG_PM_SLEEP 1152 static int exynos_tmu_suspend(struct device *dev) 1153 { 1154 exynos_tmu_control(to_platform_device(dev), false); 1155 1156 return 0; 1157 } 1158 1159 static int exynos_tmu_resume(struct device *dev) 1160 { 1161 struct platform_device *pdev = to_platform_device(dev); 1162 1163 exynos_tmu_initialize(pdev); 1164 exynos_tmu_control(pdev, true); 1165 1166 return 0; 1167 } 1168 1169 static SIMPLE_DEV_PM_OPS(exynos_tmu_pm, 1170 exynos_tmu_suspend, exynos_tmu_resume); 1171 #define EXYNOS_TMU_PM (&exynos_tmu_pm) 1172 #else 1173 #define EXYNOS_TMU_PM NULL 1174 #endif 1175 1176 static struct platform_driver exynos_tmu_driver = { 1177 .driver = { 1178 .name = "exynos-tmu", 1179 .pm = EXYNOS_TMU_PM, 1180 .of_match_table = exynos_tmu_match, 1181 }, 1182 .probe = exynos_tmu_probe, 1183 .remove = exynos_tmu_remove, 1184 }; 1185 1186 module_platform_driver(exynos_tmu_driver); 1187 1188 MODULE_DESCRIPTION("Exynos TMU Driver"); 1189 MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>"); 1190 MODULE_LICENSE("GPL"); 1191 MODULE_ALIAS("platform:exynos-tmu"); 1192