1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * exynos_tmu.c - Samsung Exynos TMU (Thermal Management Unit)
4  *
5  *  Copyright (C) 2014 Samsung Electronics
6  *  Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
7  *  Lukasz Majewski <l.majewski@samsung.com>
8  *
9  *  Copyright (C) 2011 Samsung Electronics
10  *  Donggeun Kim <dg77.kim@samsung.com>
11  *  Amit Daniel Kachhap <amit.kachhap@linaro.org>
12  */
13 
14 #include <linux/clk.h>
15 #include <linux/io.h>
16 #include <linux/interrupt.h>
17 #include <linux/module.h>
18 #include <linux/of_device.h>
19 #include <linux/of_address.h>
20 #include <linux/of_irq.h>
21 #include <linux/platform_device.h>
22 #include <linux/regulator/consumer.h>
23 
24 #include <dt-bindings/thermal/thermal_exynos.h>
25 
26 #include "../thermal_core.h"
27 
28 /* Exynos generic registers */
29 #define EXYNOS_TMU_REG_TRIMINFO		0x0
30 #define EXYNOS_TMU_REG_CONTROL		0x20
31 #define EXYNOS_TMU_REG_STATUS		0x28
32 #define EXYNOS_TMU_REG_CURRENT_TEMP	0x40
33 #define EXYNOS_TMU_REG_INTEN		0x70
34 #define EXYNOS_TMU_REG_INTSTAT		0x74
35 #define EXYNOS_TMU_REG_INTCLEAR		0x78
36 
37 #define EXYNOS_TMU_TEMP_MASK		0xff
38 #define EXYNOS_TMU_REF_VOLTAGE_SHIFT	24
39 #define EXYNOS_TMU_REF_VOLTAGE_MASK	0x1f
40 #define EXYNOS_TMU_BUF_SLOPE_SEL_MASK	0xf
41 #define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT	8
42 #define EXYNOS_TMU_CORE_EN_SHIFT	0
43 
44 /* Exynos3250 specific registers */
45 #define EXYNOS_TMU_TRIMINFO_CON1	0x10
46 
47 /* Exynos4210 specific registers */
48 #define EXYNOS4210_TMU_REG_THRESHOLD_TEMP	0x44
49 #define EXYNOS4210_TMU_REG_TRIG_LEVEL0	0x50
50 
51 /* Exynos5250, Exynos4412, Exynos3250 specific registers */
52 #define EXYNOS_TMU_TRIMINFO_CON2	0x14
53 #define EXYNOS_THD_TEMP_RISE		0x50
54 #define EXYNOS_THD_TEMP_FALL		0x54
55 #define EXYNOS_EMUL_CON		0x80
56 
57 #define EXYNOS_TRIMINFO_RELOAD_ENABLE	1
58 #define EXYNOS_TRIMINFO_25_SHIFT	0
59 #define EXYNOS_TRIMINFO_85_SHIFT	8
60 #define EXYNOS_TMU_TRIP_MODE_SHIFT	13
61 #define EXYNOS_TMU_TRIP_MODE_MASK	0x7
62 #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT	12
63 
64 #define EXYNOS_TMU_INTEN_RISE0_SHIFT	0
65 #define EXYNOS_TMU_INTEN_FALL0_SHIFT	16
66 
67 #define EXYNOS_EMUL_TIME	0x57F0
68 #define EXYNOS_EMUL_TIME_MASK	0xffff
69 #define EXYNOS_EMUL_TIME_SHIFT	16
70 #define EXYNOS_EMUL_DATA_SHIFT	8
71 #define EXYNOS_EMUL_DATA_MASK	0xFF
72 #define EXYNOS_EMUL_ENABLE	0x1
73 
74 /* Exynos5260 specific */
75 #define EXYNOS5260_TMU_REG_INTEN		0xC0
76 #define EXYNOS5260_TMU_REG_INTSTAT		0xC4
77 #define EXYNOS5260_TMU_REG_INTCLEAR		0xC8
78 #define EXYNOS5260_EMUL_CON			0x100
79 
80 /* Exynos4412 specific */
81 #define EXYNOS4412_MUX_ADDR_VALUE          6
82 #define EXYNOS4412_MUX_ADDR_SHIFT          20
83 
84 /* Exynos5433 specific registers */
85 #define EXYNOS5433_THD_TEMP_RISE3_0		0x050
86 #define EXYNOS5433_THD_TEMP_RISE7_4		0x054
87 #define EXYNOS5433_THD_TEMP_FALL3_0		0x060
88 #define EXYNOS5433_THD_TEMP_FALL7_4		0x064
89 #define EXYNOS5433_TMU_REG_INTEN		0x0c0
90 #define EXYNOS5433_TMU_REG_INTPEND		0x0c8
91 #define EXYNOS5433_TMU_EMUL_CON			0x110
92 #define EXYNOS5433_TMU_PD_DET_EN		0x130
93 
94 #define EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT	16
95 #define EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT	23
96 #define EXYNOS5433_TRIMINFO_SENSOR_ID_MASK	\
97 			(0xf << EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT)
98 #define EXYNOS5433_TRIMINFO_CALIB_SEL_MASK	BIT(23)
99 
100 #define EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING	0
101 #define EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING	1
102 
103 #define EXYNOS5433_PD_DET_EN			1
104 
105 #define EXYNOS5433_G3D_BASE			0x10070000
106 
107 /* Exynos7 specific registers */
108 #define EXYNOS7_THD_TEMP_RISE7_6		0x50
109 #define EXYNOS7_THD_TEMP_FALL7_6		0x60
110 #define EXYNOS7_TMU_REG_INTEN			0x110
111 #define EXYNOS7_TMU_REG_INTPEND			0x118
112 #define EXYNOS7_TMU_REG_EMUL_CON		0x160
113 
114 #define EXYNOS7_TMU_TEMP_MASK			0x1ff
115 #define EXYNOS7_PD_DET_EN_SHIFT			23
116 #define EXYNOS7_TMU_INTEN_RISE0_SHIFT		0
117 #define EXYNOS7_EMUL_DATA_SHIFT			7
118 #define EXYNOS7_EMUL_DATA_MASK			0x1ff
119 
120 #define EXYNOS_FIRST_POINT_TRIM			25
121 #define EXYNOS_SECOND_POINT_TRIM		85
122 
123 #define EXYNOS_NOISE_CANCEL_MODE		4
124 
125 #define MCELSIUS	1000
126 
127 enum soc_type {
128 	SOC_ARCH_EXYNOS3250 = 1,
129 	SOC_ARCH_EXYNOS4210,
130 	SOC_ARCH_EXYNOS4412,
131 	SOC_ARCH_EXYNOS5250,
132 	SOC_ARCH_EXYNOS5260,
133 	SOC_ARCH_EXYNOS5420,
134 	SOC_ARCH_EXYNOS5420_TRIMINFO,
135 	SOC_ARCH_EXYNOS5433,
136 	SOC_ARCH_EXYNOS7,
137 };
138 
139 /**
140  * struct exynos_tmu_data : A structure to hold the private data of the TMU
141  *			    driver
142  * @id: identifier of the one instance of the TMU controller.
143  * @base: base address of the single instance of the TMU controller.
144  * @base_second: base address of the common registers of the TMU controller.
145  * @irq: irq number of the TMU controller.
146  * @soc: id of the SOC type.
147  * @irq_work: pointer to the irq work structure.
148  * @lock: lock to implement synchronization.
149  * @clk: pointer to the clock structure.
150  * @clk_sec: pointer to the clock structure for accessing the base_second.
151  * @sclk: pointer to the clock structure for accessing the tmu special clk.
152  * @cal_type: calibration type for temperature
153  * @efuse_value: SoC defined fuse value
154  * @min_efuse_value: minimum valid trimming data
155  * @max_efuse_value: maximum valid trimming data
156  * @temp_error1: fused value of the first point trim.
157  * @temp_error2: fused value of the second point trim.
158  * @gain: gain of amplifier in the positive-TC generator block
159  *	0 < gain <= 15
160  * @reference_voltage: reference voltage of amplifier
161  *	in the positive-TC generator block
162  *	0 < reference_voltage <= 31
163  * @regulator: pointer to the TMU regulator structure.
164  * @reg_conf: pointer to structure to register with core thermal.
165  * @tzd: pointer to thermal_zone_device structure
166  * @ntrip: number of supported trip points.
167  * @enabled: current status of TMU device
168  * @tmu_set_trip_temp: SoC specific method to set trip (rising threshold)
169  * @tmu_set_trip_hyst: SoC specific to set hysteresis (falling threshold)
170  * @tmu_initialize: SoC specific TMU initialization method
171  * @tmu_control: SoC specific TMU control method
172  * @tmu_read: SoC specific TMU temperature read method
173  * @tmu_set_emulation: SoC specific TMU emulation setting method
174  * @tmu_clear_irqs: SoC specific TMU interrupts clearing method
175  */
176 struct exynos_tmu_data {
177 	int id;
178 	void __iomem *base;
179 	void __iomem *base_second;
180 	int irq;
181 	enum soc_type soc;
182 	struct work_struct irq_work;
183 	struct mutex lock;
184 	struct clk *clk, *clk_sec, *sclk;
185 	u32 cal_type;
186 	u32 efuse_value;
187 	u32 min_efuse_value;
188 	u32 max_efuse_value;
189 	u16 temp_error1, temp_error2;
190 	u8 gain;
191 	u8 reference_voltage;
192 	struct regulator *regulator;
193 	struct thermal_zone_device *tzd;
194 	unsigned int ntrip;
195 	bool enabled;
196 
197 	void (*tmu_set_trip_temp)(struct exynos_tmu_data *data, int trip,
198 				 u8 temp);
199 	void (*tmu_set_trip_hyst)(struct exynos_tmu_data *data, int trip,
200 				 u8 temp, u8 hyst);
201 	void (*tmu_initialize)(struct platform_device *pdev);
202 	void (*tmu_control)(struct platform_device *pdev, bool on);
203 	int (*tmu_read)(struct exynos_tmu_data *data);
204 	void (*tmu_set_emulation)(struct exynos_tmu_data *data, int temp);
205 	void (*tmu_clear_irqs)(struct exynos_tmu_data *data);
206 };
207 
208 /*
209  * TMU treats temperature as a mapped temperature code.
210  * The temperature is converted differently depending on the calibration type.
211  */
212 static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
213 {
214 	if (data->cal_type == TYPE_ONE_POINT_TRIMMING)
215 		return temp + data->temp_error1 - EXYNOS_FIRST_POINT_TRIM;
216 
217 	return (temp - EXYNOS_FIRST_POINT_TRIM) *
218 		(data->temp_error2 - data->temp_error1) /
219 		(EXYNOS_SECOND_POINT_TRIM - EXYNOS_FIRST_POINT_TRIM) +
220 		data->temp_error1;
221 }
222 
223 /*
224  * Calculate a temperature value from a temperature code.
225  * The unit of the temperature is degree Celsius.
226  */
227 static int code_to_temp(struct exynos_tmu_data *data, u16 temp_code)
228 {
229 	if (data->cal_type == TYPE_ONE_POINT_TRIMMING)
230 		return temp_code - data->temp_error1 + EXYNOS_FIRST_POINT_TRIM;
231 
232 	return (temp_code - data->temp_error1) *
233 		(EXYNOS_SECOND_POINT_TRIM - EXYNOS_FIRST_POINT_TRIM) /
234 		(data->temp_error2 - data->temp_error1) +
235 		EXYNOS_FIRST_POINT_TRIM;
236 }
237 
238 static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info)
239 {
240 	u16 tmu_temp_mask =
241 		(data->soc == SOC_ARCH_EXYNOS7) ? EXYNOS7_TMU_TEMP_MASK
242 						: EXYNOS_TMU_TEMP_MASK;
243 
244 	data->temp_error1 = trim_info & tmu_temp_mask;
245 	data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) &
246 				EXYNOS_TMU_TEMP_MASK);
247 
248 	if (!data->temp_error1 ||
249 	    (data->min_efuse_value > data->temp_error1) ||
250 	    (data->temp_error1 > data->max_efuse_value))
251 		data->temp_error1 = data->efuse_value & EXYNOS_TMU_TEMP_MASK;
252 
253 	if (!data->temp_error2)
254 		data->temp_error2 =
255 			(data->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) &
256 			EXYNOS_TMU_TEMP_MASK;
257 }
258 
259 static int exynos_tmu_initialize(struct platform_device *pdev)
260 {
261 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
262 	struct thermal_zone_device *tzd = data->tzd;
263 	const struct thermal_trip * const trips =
264 		of_thermal_get_trip_points(tzd);
265 	unsigned int status;
266 	int ret = 0, temp, hyst;
267 
268 	if (!trips) {
269 		dev_err(&pdev->dev,
270 			"Cannot get trip points from device tree!\n");
271 		return -ENODEV;
272 	}
273 
274 	if (data->soc != SOC_ARCH_EXYNOS5433) /* FIXME */
275 		ret = tzd->ops->get_crit_temp(tzd, &temp);
276 	if (ret) {
277 		dev_err(&pdev->dev,
278 			"No CRITICAL trip point defined in device tree!\n");
279 		goto out;
280 	}
281 
282 	if (of_thermal_get_ntrips(tzd) > data->ntrip) {
283 		dev_info(&pdev->dev,
284 			 "More trip points than supported by this TMU.\n");
285 		dev_info(&pdev->dev,
286 			 "%d trip points should be configured in polling mode.\n",
287 			 (of_thermal_get_ntrips(tzd) - data->ntrip));
288 	}
289 
290 	mutex_lock(&data->lock);
291 	clk_enable(data->clk);
292 	if (!IS_ERR(data->clk_sec))
293 		clk_enable(data->clk_sec);
294 
295 	status = readb(data->base + EXYNOS_TMU_REG_STATUS);
296 	if (!status) {
297 		ret = -EBUSY;
298 	} else {
299 		int i, ntrips =
300 			min_t(int, of_thermal_get_ntrips(tzd), data->ntrip);
301 
302 		data->tmu_initialize(pdev);
303 
304 		/* Write temperature code for rising and falling threshold */
305 		for (i = 0; i < ntrips; i++) {
306 			/* Write temperature code for rising threshold */
307 			ret = tzd->ops->get_trip_temp(tzd, i, &temp);
308 			if (ret)
309 				goto err;
310 			temp /= MCELSIUS;
311 			data->tmu_set_trip_temp(data, i, temp);
312 
313 			/* Write temperature code for falling threshold */
314 			ret = tzd->ops->get_trip_hyst(tzd, i, &hyst);
315 			if (ret)
316 				goto err;
317 			hyst /= MCELSIUS;
318 			data->tmu_set_trip_hyst(data, i, temp, hyst);
319 		}
320 
321 		data->tmu_clear_irqs(data);
322 	}
323 err:
324 	clk_disable(data->clk);
325 	mutex_unlock(&data->lock);
326 	if (!IS_ERR(data->clk_sec))
327 		clk_disable(data->clk_sec);
328 out:
329 	return ret;
330 }
331 
332 static u32 get_con_reg(struct exynos_tmu_data *data, u32 con)
333 {
334 	if (data->soc == SOC_ARCH_EXYNOS4412 ||
335 	    data->soc == SOC_ARCH_EXYNOS3250)
336 		con |= (EXYNOS4412_MUX_ADDR_VALUE << EXYNOS4412_MUX_ADDR_SHIFT);
337 
338 	con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT);
339 	con |= data->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
340 
341 	con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
342 	con |= (data->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
343 
344 	con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT);
345 	con |= (EXYNOS_NOISE_CANCEL_MODE << EXYNOS_TMU_TRIP_MODE_SHIFT);
346 
347 	return con;
348 }
349 
350 static void exynos_tmu_control(struct platform_device *pdev, bool on)
351 {
352 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
353 
354 	mutex_lock(&data->lock);
355 	clk_enable(data->clk);
356 	data->tmu_control(pdev, on);
357 	data->enabled = on;
358 	clk_disable(data->clk);
359 	mutex_unlock(&data->lock);
360 }
361 
362 static void exynos4210_tmu_set_trip_temp(struct exynos_tmu_data *data,
363 					 int trip, u8 temp)
364 {
365 	const struct thermal_trip * const trips =
366 		of_thermal_get_trip_points(data->tzd);
367 	u8 ref, th_code;
368 
369 	ref = trips[0].temperature / MCELSIUS;
370 
371 	if (trip == 0) {
372 		th_code = temp_to_code(data, ref);
373 		writeb(th_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
374 	}
375 
376 	temp -= ref;
377 	writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip * 4);
378 }
379 
380 /* failing thresholds are not supported on Exynos4210 */
381 static void exynos4210_tmu_set_trip_hyst(struct exynos_tmu_data *data,
382 					 int trip, u8 temp, u8 hyst)
383 {
384 }
385 
386 static void exynos4210_tmu_initialize(struct platform_device *pdev)
387 {
388 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
389 
390 	sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO));
391 }
392 
393 static void exynos4412_tmu_set_trip_temp(struct exynos_tmu_data *data,
394 					 int trip, u8 temp)
395 {
396 	u32 th, con;
397 
398 	th = readl(data->base + EXYNOS_THD_TEMP_RISE);
399 	th &= ~(0xff << 8 * trip);
400 	th |= temp_to_code(data, temp) << 8 * trip;
401 	writel(th, data->base + EXYNOS_THD_TEMP_RISE);
402 
403 	if (trip == 3) {
404 		con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
405 		con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
406 		writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
407 	}
408 }
409 
410 static void exynos4412_tmu_set_trip_hyst(struct exynos_tmu_data *data,
411 					 int trip, u8 temp, u8 hyst)
412 {
413 	u32 th;
414 
415 	th = readl(data->base + EXYNOS_THD_TEMP_FALL);
416 	th &= ~(0xff << 8 * trip);
417 	if (hyst)
418 		th |= temp_to_code(data, temp - hyst) << 8 * trip;
419 	writel(th, data->base + EXYNOS_THD_TEMP_FALL);
420 }
421 
422 static void exynos4412_tmu_initialize(struct platform_device *pdev)
423 {
424 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
425 	unsigned int trim_info, ctrl;
426 
427 	if (data->soc == SOC_ARCH_EXYNOS3250 ||
428 	    data->soc == SOC_ARCH_EXYNOS4412 ||
429 	    data->soc == SOC_ARCH_EXYNOS5250) {
430 		if (data->soc == SOC_ARCH_EXYNOS3250) {
431 			ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON1);
432 			ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
433 			writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON1);
434 		}
435 		ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON2);
436 		ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
437 		writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON2);
438 	}
439 
440 	/* On exynos5420 the triminfo register is in the shared space */
441 	if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO)
442 		trim_info = readl(data->base_second + EXYNOS_TMU_REG_TRIMINFO);
443 	else
444 		trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
445 
446 	sanitize_temp_error(data, trim_info);
447 }
448 
449 static void exynos5433_tmu_set_trip_temp(struct exynos_tmu_data *data,
450 					 int trip, u8 temp)
451 {
452 	unsigned int reg_off, j;
453 	u32 th;
454 
455 	if (trip > 3) {
456 		reg_off = EXYNOS5433_THD_TEMP_RISE7_4;
457 		j = trip - 4;
458 	} else {
459 		reg_off = EXYNOS5433_THD_TEMP_RISE3_0;
460 		j = trip;
461 	}
462 
463 	th = readl(data->base + reg_off);
464 	th &= ~(0xff << j * 8);
465 	th |= (temp_to_code(data, temp) << j * 8);
466 	writel(th, data->base + reg_off);
467 }
468 
469 static void exynos5433_tmu_set_trip_hyst(struct exynos_tmu_data *data,
470 					 int trip, u8 temp, u8 hyst)
471 {
472 	unsigned int reg_off, j;
473 	u32 th;
474 
475 	if (trip > 3) {
476 		reg_off = EXYNOS5433_THD_TEMP_FALL7_4;
477 		j = trip - 4;
478 	} else {
479 		reg_off = EXYNOS5433_THD_TEMP_FALL3_0;
480 		j = trip;
481 	}
482 
483 	th = readl(data->base + reg_off);
484 	th &= ~(0xff << j * 8);
485 	th |= (temp_to_code(data, temp - hyst) << j * 8);
486 	writel(th, data->base + reg_off);
487 }
488 
489 static void exynos5433_tmu_initialize(struct platform_device *pdev)
490 {
491 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
492 	unsigned int trim_info;
493 	int sensor_id, cal_type;
494 
495 	trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
496 	sanitize_temp_error(data, trim_info);
497 
498 	/* Read the temperature sensor id */
499 	sensor_id = (trim_info & EXYNOS5433_TRIMINFO_SENSOR_ID_MASK)
500 				>> EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT;
501 	dev_info(&pdev->dev, "Temperature sensor ID: 0x%x\n", sensor_id);
502 
503 	/* Read the calibration mode */
504 	writel(trim_info, data->base + EXYNOS_TMU_REG_TRIMINFO);
505 	cal_type = (trim_info & EXYNOS5433_TRIMINFO_CALIB_SEL_MASK)
506 				>> EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT;
507 
508 	switch (cal_type) {
509 	case EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING:
510 		data->cal_type = TYPE_TWO_POINT_TRIMMING;
511 		break;
512 	case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING:
513 	default:
514 		data->cal_type = TYPE_ONE_POINT_TRIMMING;
515 		break;
516 	}
517 
518 	dev_info(&pdev->dev, "Calibration type is %d-point calibration\n",
519 			cal_type ?  2 : 1);
520 }
521 
522 static void exynos7_tmu_set_trip_temp(struct exynos_tmu_data *data,
523 				      int trip, u8 temp)
524 {
525 	unsigned int reg_off, bit_off;
526 	u32 th;
527 
528 	reg_off = ((7 - trip) / 2) * 4;
529 	bit_off = ((8 - trip) % 2);
530 
531 	th = readl(data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
532 	th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
533 	th |= temp_to_code(data, temp) << (16 * bit_off);
534 	writel(th, data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
535 }
536 
537 static void exynos7_tmu_set_trip_hyst(struct exynos_tmu_data *data,
538 				      int trip, u8 temp, u8 hyst)
539 {
540 	unsigned int reg_off, bit_off;
541 	u32 th;
542 
543 	reg_off = ((7 - trip) / 2) * 4;
544 	bit_off = ((8 - trip) % 2);
545 
546 	th = readl(data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
547 	th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
548 	th |= temp_to_code(data, temp - hyst) << (16 * bit_off);
549 	writel(th, data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
550 }
551 
552 static void exynos7_tmu_initialize(struct platform_device *pdev)
553 {
554 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
555 	unsigned int trim_info;
556 
557 	trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
558 	sanitize_temp_error(data, trim_info);
559 }
560 
561 static void exynos4210_tmu_control(struct platform_device *pdev, bool on)
562 {
563 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
564 	struct thermal_zone_device *tz = data->tzd;
565 	unsigned int con, interrupt_en = 0, i;
566 
567 	con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
568 
569 	if (on) {
570 		for (i = 0; i < data->ntrip; i++) {
571 			if (!of_thermal_is_trip_valid(tz, i))
572 				continue;
573 
574 			interrupt_en |=
575 				(1 << (EXYNOS_TMU_INTEN_RISE0_SHIFT + i * 4));
576 		}
577 
578 		if (data->soc != SOC_ARCH_EXYNOS4210)
579 			interrupt_en |=
580 				interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
581 
582 		con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
583 	} else {
584 		con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
585 	}
586 
587 	writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);
588 	writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
589 }
590 
591 static void exynos5433_tmu_control(struct platform_device *pdev, bool on)
592 {
593 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
594 	struct thermal_zone_device *tz = data->tzd;
595 	unsigned int con, interrupt_en = 0, pd_det_en, i;
596 
597 	con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
598 
599 	if (on) {
600 		for (i = 0; i < data->ntrip; i++) {
601 			if (!of_thermal_is_trip_valid(tz, i))
602 				continue;
603 
604 			interrupt_en |=
605 				(1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i));
606 		}
607 
608 		interrupt_en |=
609 			interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
610 
611 		con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
612 	} else
613 		con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
614 
615 	pd_det_en = on ? EXYNOS5433_PD_DET_EN : 0;
616 
617 	writel(pd_det_en, data->base + EXYNOS5433_TMU_PD_DET_EN);
618 	writel(interrupt_en, data->base + EXYNOS5433_TMU_REG_INTEN);
619 	writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
620 }
621 
622 static void exynos7_tmu_control(struct platform_device *pdev, bool on)
623 {
624 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
625 	struct thermal_zone_device *tz = data->tzd;
626 	unsigned int con, interrupt_en = 0, i;
627 
628 	con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
629 
630 	if (on) {
631 		for (i = 0; i < data->ntrip; i++) {
632 			if (!of_thermal_is_trip_valid(tz, i))
633 				continue;
634 
635 			interrupt_en |=
636 				(1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i));
637 		}
638 
639 		interrupt_en |=
640 			interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
641 
642 		con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
643 		con |= (1 << EXYNOS7_PD_DET_EN_SHIFT);
644 	} else {
645 		con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
646 		con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT);
647 	}
648 
649 	writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN);
650 	writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
651 }
652 
653 static int exynos_get_temp(void *p, int *temp)
654 {
655 	struct exynos_tmu_data *data = p;
656 	int value, ret = 0;
657 
658 	if (!data || !data->tmu_read)
659 		return -EINVAL;
660 	else if (!data->enabled)
661 		/*
662 		 * Called too early, probably
663 		 * from thermal_zone_of_sensor_register().
664 		 */
665 		return -EAGAIN;
666 
667 	mutex_lock(&data->lock);
668 	clk_enable(data->clk);
669 
670 	value = data->tmu_read(data);
671 	if (value < 0)
672 		ret = value;
673 	else
674 		*temp = code_to_temp(data, value) * MCELSIUS;
675 
676 	clk_disable(data->clk);
677 	mutex_unlock(&data->lock);
678 
679 	return ret;
680 }
681 
682 #ifdef CONFIG_THERMAL_EMULATION
683 static u32 get_emul_con_reg(struct exynos_tmu_data *data, unsigned int val,
684 			    int temp)
685 {
686 	if (temp) {
687 		temp /= MCELSIUS;
688 
689 		val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT);
690 		val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT);
691 		if (data->soc == SOC_ARCH_EXYNOS7) {
692 			val &= ~(EXYNOS7_EMUL_DATA_MASK <<
693 				EXYNOS7_EMUL_DATA_SHIFT);
694 			val |= (temp_to_code(data, temp) <<
695 				EXYNOS7_EMUL_DATA_SHIFT) |
696 				EXYNOS_EMUL_ENABLE;
697 		} else {
698 			val &= ~(EXYNOS_EMUL_DATA_MASK <<
699 				EXYNOS_EMUL_DATA_SHIFT);
700 			val |= (temp_to_code(data, temp) <<
701 				EXYNOS_EMUL_DATA_SHIFT) |
702 				EXYNOS_EMUL_ENABLE;
703 		}
704 	} else {
705 		val &= ~EXYNOS_EMUL_ENABLE;
706 	}
707 
708 	return val;
709 }
710 
711 static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data,
712 					 int temp)
713 {
714 	unsigned int val;
715 	u32 emul_con;
716 
717 	if (data->soc == SOC_ARCH_EXYNOS5260)
718 		emul_con = EXYNOS5260_EMUL_CON;
719 	else if (data->soc == SOC_ARCH_EXYNOS5433)
720 		emul_con = EXYNOS5433_TMU_EMUL_CON;
721 	else if (data->soc == SOC_ARCH_EXYNOS7)
722 		emul_con = EXYNOS7_TMU_REG_EMUL_CON;
723 	else
724 		emul_con = EXYNOS_EMUL_CON;
725 
726 	val = readl(data->base + emul_con);
727 	val = get_emul_con_reg(data, val, temp);
728 	writel(val, data->base + emul_con);
729 }
730 
731 static int exynos_tmu_set_emulation(void *drv_data, int temp)
732 {
733 	struct exynos_tmu_data *data = drv_data;
734 	int ret = -EINVAL;
735 
736 	if (data->soc == SOC_ARCH_EXYNOS4210)
737 		goto out;
738 
739 	if (temp && temp < MCELSIUS)
740 		goto out;
741 
742 	mutex_lock(&data->lock);
743 	clk_enable(data->clk);
744 	data->tmu_set_emulation(data, temp);
745 	clk_disable(data->clk);
746 	mutex_unlock(&data->lock);
747 	return 0;
748 out:
749 	return ret;
750 }
751 #else
752 #define exynos4412_tmu_set_emulation NULL
753 static int exynos_tmu_set_emulation(void *drv_data, int temp)
754 	{ return -EINVAL; }
755 #endif /* CONFIG_THERMAL_EMULATION */
756 
757 static int exynos4210_tmu_read(struct exynos_tmu_data *data)
758 {
759 	int ret = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
760 
761 	/* "temp_code" should range between 75 and 175 */
762 	return (ret < 75 || ret > 175) ? -ENODATA : ret;
763 }
764 
765 static int exynos4412_tmu_read(struct exynos_tmu_data *data)
766 {
767 	return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
768 }
769 
770 static int exynos7_tmu_read(struct exynos_tmu_data *data)
771 {
772 	return readw(data->base + EXYNOS_TMU_REG_CURRENT_TEMP) &
773 		EXYNOS7_TMU_TEMP_MASK;
774 }
775 
776 static void exynos_tmu_work(struct work_struct *work)
777 {
778 	struct exynos_tmu_data *data = container_of(work,
779 			struct exynos_tmu_data, irq_work);
780 
781 	thermal_zone_device_update(data->tzd, THERMAL_EVENT_UNSPECIFIED);
782 
783 	mutex_lock(&data->lock);
784 	clk_enable(data->clk);
785 
786 	/* TODO: take action based on particular interrupt */
787 	data->tmu_clear_irqs(data);
788 
789 	clk_disable(data->clk);
790 	mutex_unlock(&data->lock);
791 	enable_irq(data->irq);
792 }
793 
794 static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data)
795 {
796 	unsigned int val_irq;
797 	u32 tmu_intstat, tmu_intclear;
798 
799 	if (data->soc == SOC_ARCH_EXYNOS5260) {
800 		tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT;
801 		tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR;
802 	} else if (data->soc == SOC_ARCH_EXYNOS7) {
803 		tmu_intstat = EXYNOS7_TMU_REG_INTPEND;
804 		tmu_intclear = EXYNOS7_TMU_REG_INTPEND;
805 	} else if (data->soc == SOC_ARCH_EXYNOS5433) {
806 		tmu_intstat = EXYNOS5433_TMU_REG_INTPEND;
807 		tmu_intclear = EXYNOS5433_TMU_REG_INTPEND;
808 	} else {
809 		tmu_intstat = EXYNOS_TMU_REG_INTSTAT;
810 		tmu_intclear = EXYNOS_TMU_REG_INTCLEAR;
811 	}
812 
813 	val_irq = readl(data->base + tmu_intstat);
814 	/*
815 	 * Clear the interrupts.  Please note that the documentation for
816 	 * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly
817 	 * states that INTCLEAR register has a different placing of bits
818 	 * responsible for FALL IRQs than INTSTAT register.  Exynos5420
819 	 * and Exynos5440 documentation is correct (Exynos4210 doesn't
820 	 * support FALL IRQs at all).
821 	 */
822 	writel(val_irq, data->base + tmu_intclear);
823 }
824 
825 static irqreturn_t exynos_tmu_irq(int irq, void *id)
826 {
827 	struct exynos_tmu_data *data = id;
828 
829 	disable_irq_nosync(irq);
830 	schedule_work(&data->irq_work);
831 
832 	return IRQ_HANDLED;
833 }
834 
835 static const struct of_device_id exynos_tmu_match[] = {
836 	{
837 		.compatible = "samsung,exynos3250-tmu",
838 		.data = (const void *)SOC_ARCH_EXYNOS3250,
839 	}, {
840 		.compatible = "samsung,exynos4210-tmu",
841 		.data = (const void *)SOC_ARCH_EXYNOS4210,
842 	}, {
843 		.compatible = "samsung,exynos4412-tmu",
844 		.data = (const void *)SOC_ARCH_EXYNOS4412,
845 	}, {
846 		.compatible = "samsung,exynos5250-tmu",
847 		.data = (const void *)SOC_ARCH_EXYNOS5250,
848 	}, {
849 		.compatible = "samsung,exynos5260-tmu",
850 		.data = (const void *)SOC_ARCH_EXYNOS5260,
851 	}, {
852 		.compatible = "samsung,exynos5420-tmu",
853 		.data = (const void *)SOC_ARCH_EXYNOS5420,
854 	}, {
855 		.compatible = "samsung,exynos5420-tmu-ext-triminfo",
856 		.data = (const void *)SOC_ARCH_EXYNOS5420_TRIMINFO,
857 	}, {
858 		.compatible = "samsung,exynos5433-tmu",
859 		.data = (const void *)SOC_ARCH_EXYNOS5433,
860 	}, {
861 		.compatible = "samsung,exynos7-tmu",
862 		.data = (const void *)SOC_ARCH_EXYNOS7,
863 	},
864 	{ },
865 };
866 MODULE_DEVICE_TABLE(of, exynos_tmu_match);
867 
868 static int exynos_map_dt_data(struct platform_device *pdev)
869 {
870 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
871 	struct resource res;
872 
873 	if (!data || !pdev->dev.of_node)
874 		return -ENODEV;
875 
876 	data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
877 	if (data->id < 0)
878 		data->id = 0;
879 
880 	data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
881 	if (data->irq <= 0) {
882 		dev_err(&pdev->dev, "failed to get IRQ\n");
883 		return -ENODEV;
884 	}
885 
886 	if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
887 		dev_err(&pdev->dev, "failed to get Resource 0\n");
888 		return -ENODEV;
889 	}
890 
891 	data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res));
892 	if (!data->base) {
893 		dev_err(&pdev->dev, "Failed to ioremap memory\n");
894 		return -EADDRNOTAVAIL;
895 	}
896 
897 	data->soc = (enum soc_type)of_device_get_match_data(&pdev->dev);
898 
899 	switch (data->soc) {
900 	case SOC_ARCH_EXYNOS4210:
901 		data->tmu_set_trip_temp = exynos4210_tmu_set_trip_temp;
902 		data->tmu_set_trip_hyst = exynos4210_tmu_set_trip_hyst;
903 		data->tmu_initialize = exynos4210_tmu_initialize;
904 		data->tmu_control = exynos4210_tmu_control;
905 		data->tmu_read = exynos4210_tmu_read;
906 		data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
907 		data->ntrip = 4;
908 		data->gain = 15;
909 		data->reference_voltage = 7;
910 		data->efuse_value = 55;
911 		data->min_efuse_value = 40;
912 		data->max_efuse_value = 100;
913 		break;
914 	case SOC_ARCH_EXYNOS3250:
915 	case SOC_ARCH_EXYNOS4412:
916 	case SOC_ARCH_EXYNOS5250:
917 	case SOC_ARCH_EXYNOS5260:
918 	case SOC_ARCH_EXYNOS5420:
919 	case SOC_ARCH_EXYNOS5420_TRIMINFO:
920 		data->tmu_set_trip_temp = exynos4412_tmu_set_trip_temp;
921 		data->tmu_set_trip_hyst = exynos4412_tmu_set_trip_hyst;
922 		data->tmu_initialize = exynos4412_tmu_initialize;
923 		data->tmu_control = exynos4210_tmu_control;
924 		data->tmu_read = exynos4412_tmu_read;
925 		data->tmu_set_emulation = exynos4412_tmu_set_emulation;
926 		data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
927 		data->ntrip = 4;
928 		data->gain = 8;
929 		data->reference_voltage = 16;
930 		data->efuse_value = 55;
931 		if (data->soc != SOC_ARCH_EXYNOS5420 &&
932 		    data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO)
933 			data->min_efuse_value = 40;
934 		else
935 			data->min_efuse_value = 0;
936 		data->max_efuse_value = 100;
937 		break;
938 	case SOC_ARCH_EXYNOS5433:
939 		data->tmu_set_trip_temp = exynos5433_tmu_set_trip_temp;
940 		data->tmu_set_trip_hyst = exynos5433_tmu_set_trip_hyst;
941 		data->tmu_initialize = exynos5433_tmu_initialize;
942 		data->tmu_control = exynos5433_tmu_control;
943 		data->tmu_read = exynos4412_tmu_read;
944 		data->tmu_set_emulation = exynos4412_tmu_set_emulation;
945 		data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
946 		data->ntrip = 8;
947 		data->gain = 8;
948 		if (res.start == EXYNOS5433_G3D_BASE)
949 			data->reference_voltage = 23;
950 		else
951 			data->reference_voltage = 16;
952 		data->efuse_value = 75;
953 		data->min_efuse_value = 40;
954 		data->max_efuse_value = 150;
955 		break;
956 	case SOC_ARCH_EXYNOS7:
957 		data->tmu_set_trip_temp = exynos7_tmu_set_trip_temp;
958 		data->tmu_set_trip_hyst = exynos7_tmu_set_trip_hyst;
959 		data->tmu_initialize = exynos7_tmu_initialize;
960 		data->tmu_control = exynos7_tmu_control;
961 		data->tmu_read = exynos7_tmu_read;
962 		data->tmu_set_emulation = exynos4412_tmu_set_emulation;
963 		data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
964 		data->ntrip = 8;
965 		data->gain = 9;
966 		data->reference_voltage = 17;
967 		data->efuse_value = 75;
968 		data->min_efuse_value = 15;
969 		data->max_efuse_value = 100;
970 		break;
971 	default:
972 		dev_err(&pdev->dev, "Platform not supported\n");
973 		return -EINVAL;
974 	}
975 
976 	data->cal_type = TYPE_ONE_POINT_TRIMMING;
977 
978 	/*
979 	 * Check if the TMU shares some registers and then try to map the
980 	 * memory of common registers.
981 	 */
982 	if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO)
983 		return 0;
984 
985 	if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
986 		dev_err(&pdev->dev, "failed to get Resource 1\n");
987 		return -ENODEV;
988 	}
989 
990 	data->base_second = devm_ioremap(&pdev->dev, res.start,
991 					resource_size(&res));
992 	if (!data->base_second) {
993 		dev_err(&pdev->dev, "Failed to ioremap memory\n");
994 		return -ENOMEM;
995 	}
996 
997 	return 0;
998 }
999 
1000 static const struct thermal_zone_of_device_ops exynos_sensor_ops = {
1001 	.get_temp = exynos_get_temp,
1002 	.set_emul_temp = exynos_tmu_set_emulation,
1003 };
1004 
1005 static int exynos_tmu_probe(struct platform_device *pdev)
1006 {
1007 	struct exynos_tmu_data *data;
1008 	int ret;
1009 
1010 	data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data),
1011 					GFP_KERNEL);
1012 	if (!data)
1013 		return -ENOMEM;
1014 
1015 	platform_set_drvdata(pdev, data);
1016 	mutex_init(&data->lock);
1017 
1018 	/*
1019 	 * Try enabling the regulator if found
1020 	 * TODO: Add regulator as an SOC feature, so that regulator enable
1021 	 * is a compulsory call.
1022 	 */
1023 	data->regulator = devm_regulator_get_optional(&pdev->dev, "vtmu");
1024 	if (!IS_ERR(data->regulator)) {
1025 		ret = regulator_enable(data->regulator);
1026 		if (ret) {
1027 			dev_err(&pdev->dev, "failed to enable vtmu\n");
1028 			return ret;
1029 		}
1030 	} else {
1031 		if (PTR_ERR(data->regulator) == -EPROBE_DEFER)
1032 			return -EPROBE_DEFER;
1033 		dev_info(&pdev->dev, "Regulator node (vtmu) not found\n");
1034 	}
1035 
1036 	ret = exynos_map_dt_data(pdev);
1037 	if (ret)
1038 		goto err_sensor;
1039 
1040 	INIT_WORK(&data->irq_work, exynos_tmu_work);
1041 
1042 	data->clk = devm_clk_get(&pdev->dev, "tmu_apbif");
1043 	if (IS_ERR(data->clk)) {
1044 		dev_err(&pdev->dev, "Failed to get clock\n");
1045 		ret = PTR_ERR(data->clk);
1046 		goto err_sensor;
1047 	}
1048 
1049 	data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif");
1050 	if (IS_ERR(data->clk_sec)) {
1051 		if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) {
1052 			dev_err(&pdev->dev, "Failed to get triminfo clock\n");
1053 			ret = PTR_ERR(data->clk_sec);
1054 			goto err_sensor;
1055 		}
1056 	} else {
1057 		ret = clk_prepare(data->clk_sec);
1058 		if (ret) {
1059 			dev_err(&pdev->dev, "Failed to get clock\n");
1060 			goto err_sensor;
1061 		}
1062 	}
1063 
1064 	ret = clk_prepare(data->clk);
1065 	if (ret) {
1066 		dev_err(&pdev->dev, "Failed to get clock\n");
1067 		goto err_clk_sec;
1068 	}
1069 
1070 	switch (data->soc) {
1071 	case SOC_ARCH_EXYNOS5433:
1072 	case SOC_ARCH_EXYNOS7:
1073 		data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk");
1074 		if (IS_ERR(data->sclk)) {
1075 			dev_err(&pdev->dev, "Failed to get sclk\n");
1076 			goto err_clk;
1077 		} else {
1078 			ret = clk_prepare_enable(data->sclk);
1079 			if (ret) {
1080 				dev_err(&pdev->dev, "Failed to enable sclk\n");
1081 				goto err_clk;
1082 			}
1083 		}
1084 		break;
1085 	default:
1086 		break;
1087 	}
1088 
1089 	/*
1090 	 * data->tzd must be registered before calling exynos_tmu_initialize(),
1091 	 * requesting irq and calling exynos_tmu_control().
1092 	 */
1093 	data->tzd = thermal_zone_of_sensor_register(&pdev->dev, 0, data,
1094 						    &exynos_sensor_ops);
1095 	if (IS_ERR(data->tzd)) {
1096 		ret = PTR_ERR(data->tzd);
1097 		if (ret != -EPROBE_DEFER)
1098 			dev_err(&pdev->dev, "Failed to register sensor: %d\n",
1099 				ret);
1100 		goto err_sclk;
1101 	}
1102 
1103 	ret = exynos_tmu_initialize(pdev);
1104 	if (ret) {
1105 		dev_err(&pdev->dev, "Failed to initialize TMU\n");
1106 		goto err_thermal;
1107 	}
1108 
1109 	ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
1110 		IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
1111 	if (ret) {
1112 		dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
1113 		goto err_thermal;
1114 	}
1115 
1116 	exynos_tmu_control(pdev, true);
1117 	return 0;
1118 
1119 err_thermal:
1120 	thermal_zone_of_sensor_unregister(&pdev->dev, data->tzd);
1121 err_sclk:
1122 	clk_disable_unprepare(data->sclk);
1123 err_clk:
1124 	clk_unprepare(data->clk);
1125 err_clk_sec:
1126 	if (!IS_ERR(data->clk_sec))
1127 		clk_unprepare(data->clk_sec);
1128 err_sensor:
1129 	if (!IS_ERR(data->regulator))
1130 		regulator_disable(data->regulator);
1131 
1132 	return ret;
1133 }
1134 
1135 static int exynos_tmu_remove(struct platform_device *pdev)
1136 {
1137 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
1138 	struct thermal_zone_device *tzd = data->tzd;
1139 
1140 	thermal_zone_of_sensor_unregister(&pdev->dev, tzd);
1141 	exynos_tmu_control(pdev, false);
1142 
1143 	clk_disable_unprepare(data->sclk);
1144 	clk_unprepare(data->clk);
1145 	if (!IS_ERR(data->clk_sec))
1146 		clk_unprepare(data->clk_sec);
1147 
1148 	if (!IS_ERR(data->regulator))
1149 		regulator_disable(data->regulator);
1150 
1151 	return 0;
1152 }
1153 
1154 #ifdef CONFIG_PM_SLEEP
1155 static int exynos_tmu_suspend(struct device *dev)
1156 {
1157 	exynos_tmu_control(to_platform_device(dev), false);
1158 
1159 	return 0;
1160 }
1161 
1162 static int exynos_tmu_resume(struct device *dev)
1163 {
1164 	struct platform_device *pdev = to_platform_device(dev);
1165 
1166 	exynos_tmu_initialize(pdev);
1167 	exynos_tmu_control(pdev, true);
1168 
1169 	return 0;
1170 }
1171 
1172 static SIMPLE_DEV_PM_OPS(exynos_tmu_pm,
1173 			 exynos_tmu_suspend, exynos_tmu_resume);
1174 #define EXYNOS_TMU_PM	(&exynos_tmu_pm)
1175 #else
1176 #define EXYNOS_TMU_PM	NULL
1177 #endif
1178 
1179 static struct platform_driver exynos_tmu_driver = {
1180 	.driver = {
1181 		.name   = "exynos-tmu",
1182 		.pm     = EXYNOS_TMU_PM,
1183 		.of_match_table = exynos_tmu_match,
1184 	},
1185 	.probe = exynos_tmu_probe,
1186 	.remove	= exynos_tmu_remove,
1187 };
1188 
1189 module_platform_driver(exynos_tmu_driver);
1190 
1191 MODULE_DESCRIPTION("Exynos TMU Driver");
1192 MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
1193 MODULE_LICENSE("GPL");
1194 MODULE_ALIAS("platform:exynos-tmu");
1195