1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * exynos_tmu.c - Samsung Exynos TMU (Thermal Management Unit) 4 * 5 * Copyright (C) 2014 Samsung Electronics 6 * Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> 7 * Lukasz Majewski <l.majewski@samsung.com> 8 * 9 * Copyright (C) 2011 Samsung Electronics 10 * Donggeun Kim <dg77.kim@samsung.com> 11 * Amit Daniel Kachhap <amit.kachhap@linaro.org> 12 */ 13 14 #include <linux/clk.h> 15 #include <linux/io.h> 16 #include <linux/interrupt.h> 17 #include <linux/module.h> 18 #include <linux/of.h> 19 #include <linux/of_address.h> 20 #include <linux/of_irq.h> 21 #include <linux/platform_device.h> 22 #include <linux/regulator/consumer.h> 23 #include <linux/thermal.h> 24 25 #include <dt-bindings/thermal/thermal_exynos.h> 26 27 /* Exynos generic registers */ 28 #define EXYNOS_TMU_REG_TRIMINFO 0x0 29 #define EXYNOS_TMU_REG_CONTROL 0x20 30 #define EXYNOS_TMU_REG_STATUS 0x28 31 #define EXYNOS_TMU_REG_CURRENT_TEMP 0x40 32 #define EXYNOS_TMU_REG_INTEN 0x70 33 #define EXYNOS_TMU_REG_INTSTAT 0x74 34 #define EXYNOS_TMU_REG_INTCLEAR 0x78 35 36 #define EXYNOS_TMU_TEMP_MASK 0xff 37 #define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24 38 #define EXYNOS_TMU_REF_VOLTAGE_MASK 0x1f 39 #define EXYNOS_TMU_BUF_SLOPE_SEL_MASK 0xf 40 #define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8 41 #define EXYNOS_TMU_CORE_EN_SHIFT 0 42 43 /* Exynos3250 specific registers */ 44 #define EXYNOS_TMU_TRIMINFO_CON1 0x10 45 46 /* Exynos4210 specific registers */ 47 #define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44 48 #define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50 49 50 /* Exynos5250, Exynos4412, Exynos3250 specific registers */ 51 #define EXYNOS_TMU_TRIMINFO_CON2 0x14 52 #define EXYNOS_THD_TEMP_RISE 0x50 53 #define EXYNOS_THD_TEMP_FALL 0x54 54 #define EXYNOS_EMUL_CON 0x80 55 56 #define EXYNOS_TRIMINFO_RELOAD_ENABLE 1 57 #define EXYNOS_TRIMINFO_25_SHIFT 0 58 #define EXYNOS_TRIMINFO_85_SHIFT 8 59 #define EXYNOS_TMU_TRIP_MODE_SHIFT 13 60 #define EXYNOS_TMU_TRIP_MODE_MASK 0x7 61 #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12 62 63 #define EXYNOS_TMU_INTEN_RISE0_SHIFT 0 64 #define EXYNOS_TMU_INTEN_FALL0_SHIFT 16 65 66 #define EXYNOS_EMUL_TIME 0x57F0 67 #define EXYNOS_EMUL_TIME_MASK 0xffff 68 #define EXYNOS_EMUL_TIME_SHIFT 16 69 #define EXYNOS_EMUL_DATA_SHIFT 8 70 #define EXYNOS_EMUL_DATA_MASK 0xFF 71 #define EXYNOS_EMUL_ENABLE 0x1 72 73 /* Exynos5260 specific */ 74 #define EXYNOS5260_TMU_REG_INTEN 0xC0 75 #define EXYNOS5260_TMU_REG_INTSTAT 0xC4 76 #define EXYNOS5260_TMU_REG_INTCLEAR 0xC8 77 #define EXYNOS5260_EMUL_CON 0x100 78 79 /* Exynos4412 specific */ 80 #define EXYNOS4412_MUX_ADDR_VALUE 6 81 #define EXYNOS4412_MUX_ADDR_SHIFT 20 82 83 /* Exynos5433 specific registers */ 84 #define EXYNOS5433_THD_TEMP_RISE3_0 0x050 85 #define EXYNOS5433_THD_TEMP_RISE7_4 0x054 86 #define EXYNOS5433_THD_TEMP_FALL3_0 0x060 87 #define EXYNOS5433_THD_TEMP_FALL7_4 0x064 88 #define EXYNOS5433_TMU_REG_INTEN 0x0c0 89 #define EXYNOS5433_TMU_REG_INTPEND 0x0c8 90 #define EXYNOS5433_TMU_EMUL_CON 0x110 91 #define EXYNOS5433_TMU_PD_DET_EN 0x130 92 93 #define EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT 16 94 #define EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT 23 95 #define EXYNOS5433_TRIMINFO_SENSOR_ID_MASK \ 96 (0xf << EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT) 97 #define EXYNOS5433_TRIMINFO_CALIB_SEL_MASK BIT(23) 98 99 #define EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING 0 100 #define EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING 1 101 102 #define EXYNOS5433_PD_DET_EN 1 103 104 #define EXYNOS5433_G3D_BASE 0x10070000 105 106 /* Exynos7 specific registers */ 107 #define EXYNOS7_THD_TEMP_RISE7_6 0x50 108 #define EXYNOS7_THD_TEMP_FALL7_6 0x60 109 #define EXYNOS7_TMU_REG_INTEN 0x110 110 #define EXYNOS7_TMU_REG_INTPEND 0x118 111 #define EXYNOS7_TMU_REG_EMUL_CON 0x160 112 113 #define EXYNOS7_TMU_TEMP_MASK 0x1ff 114 #define EXYNOS7_PD_DET_EN_SHIFT 23 115 #define EXYNOS7_TMU_INTEN_RISE0_SHIFT 0 116 #define EXYNOS7_EMUL_DATA_SHIFT 7 117 #define EXYNOS7_EMUL_DATA_MASK 0x1ff 118 119 #define EXYNOS_FIRST_POINT_TRIM 25 120 #define EXYNOS_SECOND_POINT_TRIM 85 121 122 #define EXYNOS_NOISE_CANCEL_MODE 4 123 124 #define MCELSIUS 1000 125 126 enum soc_type { 127 SOC_ARCH_EXYNOS3250 = 1, 128 SOC_ARCH_EXYNOS4210, 129 SOC_ARCH_EXYNOS4412, 130 SOC_ARCH_EXYNOS5250, 131 SOC_ARCH_EXYNOS5260, 132 SOC_ARCH_EXYNOS5420, 133 SOC_ARCH_EXYNOS5420_TRIMINFO, 134 SOC_ARCH_EXYNOS5433, 135 SOC_ARCH_EXYNOS7, 136 }; 137 138 /** 139 * struct exynos_tmu_data : A structure to hold the private data of the TMU 140 * driver 141 * @id: identifier of the one instance of the TMU controller. 142 * @base: base address of the single instance of the TMU controller. 143 * @base_second: base address of the common registers of the TMU controller. 144 * @irq: irq number of the TMU controller. 145 * @soc: id of the SOC type. 146 * @irq_work: pointer to the irq work structure. 147 * @lock: lock to implement synchronization. 148 * @clk: pointer to the clock structure. 149 * @clk_sec: pointer to the clock structure for accessing the base_second. 150 * @sclk: pointer to the clock structure for accessing the tmu special clk. 151 * @cal_type: calibration type for temperature 152 * @efuse_value: SoC defined fuse value 153 * @min_efuse_value: minimum valid trimming data 154 * @max_efuse_value: maximum valid trimming data 155 * @temp_error1: fused value of the first point trim. 156 * @temp_error2: fused value of the second point trim. 157 * @gain: gain of amplifier in the positive-TC generator block 158 * 0 < gain <= 15 159 * @reference_voltage: reference voltage of amplifier 160 * in the positive-TC generator block 161 * 0 < reference_voltage <= 31 162 * @regulator: pointer to the TMU regulator structure. 163 * @reg_conf: pointer to structure to register with core thermal. 164 * @tzd: pointer to thermal_zone_device structure 165 * @ntrip: number of supported trip points. 166 * @enabled: current status of TMU device 167 * @tmu_set_trip_temp: SoC specific method to set trip (rising threshold) 168 * @tmu_set_trip_hyst: SoC specific to set hysteresis (falling threshold) 169 * @tmu_initialize: SoC specific TMU initialization method 170 * @tmu_control: SoC specific TMU control method 171 * @tmu_read: SoC specific TMU temperature read method 172 * @tmu_set_emulation: SoC specific TMU emulation setting method 173 * @tmu_clear_irqs: SoC specific TMU interrupts clearing method 174 */ 175 struct exynos_tmu_data { 176 int id; 177 void __iomem *base; 178 void __iomem *base_second; 179 int irq; 180 enum soc_type soc; 181 struct work_struct irq_work; 182 struct mutex lock; 183 struct clk *clk, *clk_sec, *sclk; 184 u32 cal_type; 185 u32 efuse_value; 186 u32 min_efuse_value; 187 u32 max_efuse_value; 188 u16 temp_error1, temp_error2; 189 u8 gain; 190 u8 reference_voltage; 191 struct regulator *regulator; 192 struct thermal_zone_device *tzd; 193 unsigned int ntrip; 194 bool enabled; 195 196 void (*tmu_set_trip_temp)(struct exynos_tmu_data *data, int trip, 197 u8 temp); 198 void (*tmu_set_trip_hyst)(struct exynos_tmu_data *data, int trip, 199 u8 temp, u8 hyst); 200 void (*tmu_initialize)(struct platform_device *pdev); 201 void (*tmu_control)(struct platform_device *pdev, bool on); 202 int (*tmu_read)(struct exynos_tmu_data *data); 203 void (*tmu_set_emulation)(struct exynos_tmu_data *data, int temp); 204 void (*tmu_clear_irqs)(struct exynos_tmu_data *data); 205 }; 206 207 /* 208 * TMU treats temperature as a mapped temperature code. 209 * The temperature is converted differently depending on the calibration type. 210 */ 211 static int temp_to_code(struct exynos_tmu_data *data, u8 temp) 212 { 213 if (data->cal_type == TYPE_ONE_POINT_TRIMMING) 214 return temp + data->temp_error1 - EXYNOS_FIRST_POINT_TRIM; 215 216 return (temp - EXYNOS_FIRST_POINT_TRIM) * 217 (data->temp_error2 - data->temp_error1) / 218 (EXYNOS_SECOND_POINT_TRIM - EXYNOS_FIRST_POINT_TRIM) + 219 data->temp_error1; 220 } 221 222 /* 223 * Calculate a temperature value from a temperature code. 224 * The unit of the temperature is degree Celsius. 225 */ 226 static int code_to_temp(struct exynos_tmu_data *data, u16 temp_code) 227 { 228 if (data->cal_type == TYPE_ONE_POINT_TRIMMING) 229 return temp_code - data->temp_error1 + EXYNOS_FIRST_POINT_TRIM; 230 231 return (temp_code - data->temp_error1) * 232 (EXYNOS_SECOND_POINT_TRIM - EXYNOS_FIRST_POINT_TRIM) / 233 (data->temp_error2 - data->temp_error1) + 234 EXYNOS_FIRST_POINT_TRIM; 235 } 236 237 static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info) 238 { 239 u16 tmu_temp_mask = 240 (data->soc == SOC_ARCH_EXYNOS7) ? EXYNOS7_TMU_TEMP_MASK 241 : EXYNOS_TMU_TEMP_MASK; 242 243 data->temp_error1 = trim_info & tmu_temp_mask; 244 data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) & 245 EXYNOS_TMU_TEMP_MASK); 246 247 if (!data->temp_error1 || 248 (data->min_efuse_value > data->temp_error1) || 249 (data->temp_error1 > data->max_efuse_value)) 250 data->temp_error1 = data->efuse_value & EXYNOS_TMU_TEMP_MASK; 251 252 if (!data->temp_error2) 253 data->temp_error2 = 254 (data->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) & 255 EXYNOS_TMU_TEMP_MASK; 256 } 257 258 static int exynos_tmu_initialize(struct platform_device *pdev) 259 { 260 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 261 struct thermal_zone_device *tzd = data->tzd; 262 int num_trips = thermal_zone_get_num_trips(tzd); 263 unsigned int status; 264 int ret = 0, temp; 265 266 ret = thermal_zone_get_crit_temp(tzd, &temp); 267 if (ret && data->soc != SOC_ARCH_EXYNOS5433) { /* FIXME */ 268 dev_err(&pdev->dev, 269 "No CRITICAL trip point defined in device tree!\n"); 270 goto out; 271 } 272 273 if (num_trips > data->ntrip) { 274 dev_info(&pdev->dev, 275 "More trip points than supported by this TMU.\n"); 276 dev_info(&pdev->dev, 277 "%d trip points should be configured in polling mode.\n", 278 num_trips - data->ntrip); 279 } 280 281 mutex_lock(&data->lock); 282 clk_enable(data->clk); 283 if (!IS_ERR(data->clk_sec)) 284 clk_enable(data->clk_sec); 285 286 status = readb(data->base + EXYNOS_TMU_REG_STATUS); 287 if (!status) { 288 ret = -EBUSY; 289 } else { 290 int i, ntrips = 291 min_t(int, num_trips, data->ntrip); 292 293 data->tmu_initialize(pdev); 294 295 /* Write temperature code for rising and falling threshold */ 296 for (i = 0; i < ntrips; i++) { 297 298 struct thermal_trip trip; 299 300 ret = thermal_zone_get_trip(tzd, i, &trip); 301 if (ret) 302 goto err; 303 304 data->tmu_set_trip_temp(data, i, trip.temperature / MCELSIUS); 305 data->tmu_set_trip_hyst(data, i, trip.temperature / MCELSIUS, 306 trip.hysteresis / MCELSIUS); 307 } 308 309 data->tmu_clear_irqs(data); 310 } 311 err: 312 clk_disable(data->clk); 313 mutex_unlock(&data->lock); 314 if (!IS_ERR(data->clk_sec)) 315 clk_disable(data->clk_sec); 316 out: 317 return ret; 318 } 319 320 static u32 get_con_reg(struct exynos_tmu_data *data, u32 con) 321 { 322 if (data->soc == SOC_ARCH_EXYNOS4412 || 323 data->soc == SOC_ARCH_EXYNOS3250) 324 con |= (EXYNOS4412_MUX_ADDR_VALUE << EXYNOS4412_MUX_ADDR_SHIFT); 325 326 con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT); 327 con |= data->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT; 328 329 con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); 330 con |= (data->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); 331 332 con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT); 333 con |= (EXYNOS_NOISE_CANCEL_MODE << EXYNOS_TMU_TRIP_MODE_SHIFT); 334 335 return con; 336 } 337 338 static void exynos_tmu_control(struct platform_device *pdev, bool on) 339 { 340 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 341 342 mutex_lock(&data->lock); 343 clk_enable(data->clk); 344 data->tmu_control(pdev, on); 345 data->enabled = on; 346 clk_disable(data->clk); 347 mutex_unlock(&data->lock); 348 } 349 350 static void exynos4210_tmu_set_trip_temp(struct exynos_tmu_data *data, 351 int trip_id, u8 temp) 352 { 353 struct thermal_trip trip; 354 u8 ref, th_code; 355 356 if (thermal_zone_get_trip(data->tzd, 0, &trip)) 357 return; 358 359 ref = trip.temperature / MCELSIUS; 360 361 if (trip_id == 0) { 362 th_code = temp_to_code(data, ref); 363 writeb(th_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP); 364 } 365 366 temp -= ref; 367 writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip_id * 4); 368 } 369 370 /* failing thresholds are not supported on Exynos4210 */ 371 static void exynos4210_tmu_set_trip_hyst(struct exynos_tmu_data *data, 372 int trip, u8 temp, u8 hyst) 373 { 374 } 375 376 static void exynos4210_tmu_initialize(struct platform_device *pdev) 377 { 378 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 379 380 sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO)); 381 } 382 383 static void exynos4412_tmu_set_trip_temp(struct exynos_tmu_data *data, 384 int trip, u8 temp) 385 { 386 u32 th, con; 387 388 th = readl(data->base + EXYNOS_THD_TEMP_RISE); 389 th &= ~(0xff << 8 * trip); 390 th |= temp_to_code(data, temp) << 8 * trip; 391 writel(th, data->base + EXYNOS_THD_TEMP_RISE); 392 393 if (trip == 3) { 394 con = readl(data->base + EXYNOS_TMU_REG_CONTROL); 395 con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT); 396 writel(con, data->base + EXYNOS_TMU_REG_CONTROL); 397 } 398 } 399 400 static void exynos4412_tmu_set_trip_hyst(struct exynos_tmu_data *data, 401 int trip, u8 temp, u8 hyst) 402 { 403 u32 th; 404 405 th = readl(data->base + EXYNOS_THD_TEMP_FALL); 406 th &= ~(0xff << 8 * trip); 407 if (hyst) 408 th |= temp_to_code(data, temp - hyst) << 8 * trip; 409 writel(th, data->base + EXYNOS_THD_TEMP_FALL); 410 } 411 412 static void exynos4412_tmu_initialize(struct platform_device *pdev) 413 { 414 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 415 unsigned int trim_info, ctrl; 416 417 if (data->soc == SOC_ARCH_EXYNOS3250 || 418 data->soc == SOC_ARCH_EXYNOS4412 || 419 data->soc == SOC_ARCH_EXYNOS5250) { 420 if (data->soc == SOC_ARCH_EXYNOS3250) { 421 ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON1); 422 ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE; 423 writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON1); 424 } 425 ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON2); 426 ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE; 427 writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON2); 428 } 429 430 /* On exynos5420 the triminfo register is in the shared space */ 431 if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) 432 trim_info = readl(data->base_second + EXYNOS_TMU_REG_TRIMINFO); 433 else 434 trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); 435 436 sanitize_temp_error(data, trim_info); 437 } 438 439 static void exynos5433_tmu_set_trip_temp(struct exynos_tmu_data *data, 440 int trip, u8 temp) 441 { 442 unsigned int reg_off, j; 443 u32 th; 444 445 if (trip > 3) { 446 reg_off = EXYNOS5433_THD_TEMP_RISE7_4; 447 j = trip - 4; 448 } else { 449 reg_off = EXYNOS5433_THD_TEMP_RISE3_0; 450 j = trip; 451 } 452 453 th = readl(data->base + reg_off); 454 th &= ~(0xff << j * 8); 455 th |= (temp_to_code(data, temp) << j * 8); 456 writel(th, data->base + reg_off); 457 } 458 459 static void exynos5433_tmu_set_trip_hyst(struct exynos_tmu_data *data, 460 int trip, u8 temp, u8 hyst) 461 { 462 unsigned int reg_off, j; 463 u32 th; 464 465 if (trip > 3) { 466 reg_off = EXYNOS5433_THD_TEMP_FALL7_4; 467 j = trip - 4; 468 } else { 469 reg_off = EXYNOS5433_THD_TEMP_FALL3_0; 470 j = trip; 471 } 472 473 th = readl(data->base + reg_off); 474 th &= ~(0xff << j * 8); 475 th |= (temp_to_code(data, temp - hyst) << j * 8); 476 writel(th, data->base + reg_off); 477 } 478 479 static void exynos5433_tmu_initialize(struct platform_device *pdev) 480 { 481 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 482 unsigned int trim_info; 483 int sensor_id, cal_type; 484 485 trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); 486 sanitize_temp_error(data, trim_info); 487 488 /* Read the temperature sensor id */ 489 sensor_id = (trim_info & EXYNOS5433_TRIMINFO_SENSOR_ID_MASK) 490 >> EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT; 491 dev_info(&pdev->dev, "Temperature sensor ID: 0x%x\n", sensor_id); 492 493 /* Read the calibration mode */ 494 writel(trim_info, data->base + EXYNOS_TMU_REG_TRIMINFO); 495 cal_type = (trim_info & EXYNOS5433_TRIMINFO_CALIB_SEL_MASK) 496 >> EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT; 497 498 switch (cal_type) { 499 case EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING: 500 data->cal_type = TYPE_TWO_POINT_TRIMMING; 501 break; 502 case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING: 503 default: 504 data->cal_type = TYPE_ONE_POINT_TRIMMING; 505 break; 506 } 507 508 dev_info(&pdev->dev, "Calibration type is %d-point calibration\n", 509 cal_type ? 2 : 1); 510 } 511 512 static void exynos7_tmu_set_trip_temp(struct exynos_tmu_data *data, 513 int trip, u8 temp) 514 { 515 unsigned int reg_off, bit_off; 516 u32 th; 517 518 reg_off = ((7 - trip) / 2) * 4; 519 bit_off = ((8 - trip) % 2); 520 521 th = readl(data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off); 522 th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off)); 523 th |= temp_to_code(data, temp) << (16 * bit_off); 524 writel(th, data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off); 525 } 526 527 static void exynos7_tmu_set_trip_hyst(struct exynos_tmu_data *data, 528 int trip, u8 temp, u8 hyst) 529 { 530 unsigned int reg_off, bit_off; 531 u32 th; 532 533 reg_off = ((7 - trip) / 2) * 4; 534 bit_off = ((8 - trip) % 2); 535 536 th = readl(data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off); 537 th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off)); 538 th |= temp_to_code(data, temp - hyst) << (16 * bit_off); 539 writel(th, data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off); 540 } 541 542 static void exynos7_tmu_initialize(struct platform_device *pdev) 543 { 544 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 545 unsigned int trim_info; 546 547 trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); 548 sanitize_temp_error(data, trim_info); 549 } 550 551 static void exynos4210_tmu_control(struct platform_device *pdev, bool on) 552 { 553 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 554 struct thermal_zone_device *tz = data->tzd; 555 struct thermal_trip trip; 556 unsigned int con, interrupt_en = 0, i; 557 558 con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); 559 560 if (on) { 561 for (i = 0; i < data->ntrip; i++) { 562 if (thermal_zone_get_trip(tz, i, &trip)) 563 continue; 564 565 interrupt_en |= 566 (1 << (EXYNOS_TMU_INTEN_RISE0_SHIFT + i * 4)); 567 } 568 569 if (data->soc != SOC_ARCH_EXYNOS4210) 570 interrupt_en |= 571 interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; 572 573 con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); 574 } else { 575 con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); 576 } 577 578 writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN); 579 writel(con, data->base + EXYNOS_TMU_REG_CONTROL); 580 } 581 582 static void exynos5433_tmu_control(struct platform_device *pdev, bool on) 583 { 584 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 585 struct thermal_zone_device *tz = data->tzd; 586 struct thermal_trip trip; 587 unsigned int con, interrupt_en = 0, pd_det_en, i; 588 589 con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); 590 591 if (on) { 592 for (i = 0; i < data->ntrip; i++) { 593 if (thermal_zone_get_trip(tz, i, &trip)) 594 continue; 595 596 interrupt_en |= 597 (1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i)); 598 } 599 600 interrupt_en |= 601 interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; 602 603 con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); 604 } else 605 con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); 606 607 pd_det_en = on ? EXYNOS5433_PD_DET_EN : 0; 608 609 writel(pd_det_en, data->base + EXYNOS5433_TMU_PD_DET_EN); 610 writel(interrupt_en, data->base + EXYNOS5433_TMU_REG_INTEN); 611 writel(con, data->base + EXYNOS_TMU_REG_CONTROL); 612 } 613 614 static void exynos7_tmu_control(struct platform_device *pdev, bool on) 615 { 616 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 617 struct thermal_zone_device *tz = data->tzd; 618 struct thermal_trip trip; 619 unsigned int con, interrupt_en = 0, i; 620 621 con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); 622 623 if (on) { 624 for (i = 0; i < data->ntrip; i++) { 625 if (thermal_zone_get_trip(tz, i, &trip)) 626 continue; 627 628 interrupt_en |= 629 (1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i)); 630 } 631 632 interrupt_en |= 633 interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; 634 635 con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); 636 con |= (1 << EXYNOS7_PD_DET_EN_SHIFT); 637 } else { 638 con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); 639 con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT); 640 } 641 642 writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN); 643 writel(con, data->base + EXYNOS_TMU_REG_CONTROL); 644 } 645 646 static int exynos_get_temp(struct thermal_zone_device *tz, int *temp) 647 { 648 struct exynos_tmu_data *data = thermal_zone_device_priv(tz); 649 int value, ret = 0; 650 651 if (!data || !data->tmu_read) 652 return -EINVAL; 653 else if (!data->enabled) 654 /* 655 * Called too early, probably 656 * from thermal_zone_of_sensor_register(). 657 */ 658 return -EAGAIN; 659 660 mutex_lock(&data->lock); 661 clk_enable(data->clk); 662 663 value = data->tmu_read(data); 664 if (value < 0) 665 ret = value; 666 else 667 *temp = code_to_temp(data, value) * MCELSIUS; 668 669 clk_disable(data->clk); 670 mutex_unlock(&data->lock); 671 672 return ret; 673 } 674 675 #ifdef CONFIG_THERMAL_EMULATION 676 static u32 get_emul_con_reg(struct exynos_tmu_data *data, unsigned int val, 677 int temp) 678 { 679 if (temp) { 680 temp /= MCELSIUS; 681 682 val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT); 683 val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT); 684 if (data->soc == SOC_ARCH_EXYNOS7) { 685 val &= ~(EXYNOS7_EMUL_DATA_MASK << 686 EXYNOS7_EMUL_DATA_SHIFT); 687 val |= (temp_to_code(data, temp) << 688 EXYNOS7_EMUL_DATA_SHIFT) | 689 EXYNOS_EMUL_ENABLE; 690 } else { 691 val &= ~(EXYNOS_EMUL_DATA_MASK << 692 EXYNOS_EMUL_DATA_SHIFT); 693 val |= (temp_to_code(data, temp) << 694 EXYNOS_EMUL_DATA_SHIFT) | 695 EXYNOS_EMUL_ENABLE; 696 } 697 } else { 698 val &= ~EXYNOS_EMUL_ENABLE; 699 } 700 701 return val; 702 } 703 704 static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data, 705 int temp) 706 { 707 unsigned int val; 708 u32 emul_con; 709 710 if (data->soc == SOC_ARCH_EXYNOS5260) 711 emul_con = EXYNOS5260_EMUL_CON; 712 else if (data->soc == SOC_ARCH_EXYNOS5433) 713 emul_con = EXYNOS5433_TMU_EMUL_CON; 714 else if (data->soc == SOC_ARCH_EXYNOS7) 715 emul_con = EXYNOS7_TMU_REG_EMUL_CON; 716 else 717 emul_con = EXYNOS_EMUL_CON; 718 719 val = readl(data->base + emul_con); 720 val = get_emul_con_reg(data, val, temp); 721 writel(val, data->base + emul_con); 722 } 723 724 static int exynos_tmu_set_emulation(struct thermal_zone_device *tz, int temp) 725 { 726 struct exynos_tmu_data *data = thermal_zone_device_priv(tz); 727 int ret = -EINVAL; 728 729 if (data->soc == SOC_ARCH_EXYNOS4210) 730 goto out; 731 732 if (temp && temp < MCELSIUS) 733 goto out; 734 735 mutex_lock(&data->lock); 736 clk_enable(data->clk); 737 data->tmu_set_emulation(data, temp); 738 clk_disable(data->clk); 739 mutex_unlock(&data->lock); 740 return 0; 741 out: 742 return ret; 743 } 744 #else 745 #define exynos4412_tmu_set_emulation NULL 746 static int exynos_tmu_set_emulation(struct thermal_zone_device *tz, int temp) 747 { return -EINVAL; } 748 #endif /* CONFIG_THERMAL_EMULATION */ 749 750 static int exynos4210_tmu_read(struct exynos_tmu_data *data) 751 { 752 int ret = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP); 753 754 /* "temp_code" should range between 75 and 175 */ 755 return (ret < 75 || ret > 175) ? -ENODATA : ret; 756 } 757 758 static int exynos4412_tmu_read(struct exynos_tmu_data *data) 759 { 760 return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP); 761 } 762 763 static int exynos7_tmu_read(struct exynos_tmu_data *data) 764 { 765 return readw(data->base + EXYNOS_TMU_REG_CURRENT_TEMP) & 766 EXYNOS7_TMU_TEMP_MASK; 767 } 768 769 static void exynos_tmu_work(struct work_struct *work) 770 { 771 struct exynos_tmu_data *data = container_of(work, 772 struct exynos_tmu_data, irq_work); 773 774 thermal_zone_device_update(data->tzd, THERMAL_EVENT_UNSPECIFIED); 775 776 mutex_lock(&data->lock); 777 clk_enable(data->clk); 778 779 /* TODO: take action based on particular interrupt */ 780 data->tmu_clear_irqs(data); 781 782 clk_disable(data->clk); 783 mutex_unlock(&data->lock); 784 enable_irq(data->irq); 785 } 786 787 static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data) 788 { 789 unsigned int val_irq; 790 u32 tmu_intstat, tmu_intclear; 791 792 if (data->soc == SOC_ARCH_EXYNOS5260) { 793 tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT; 794 tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR; 795 } else if (data->soc == SOC_ARCH_EXYNOS7) { 796 tmu_intstat = EXYNOS7_TMU_REG_INTPEND; 797 tmu_intclear = EXYNOS7_TMU_REG_INTPEND; 798 } else if (data->soc == SOC_ARCH_EXYNOS5433) { 799 tmu_intstat = EXYNOS5433_TMU_REG_INTPEND; 800 tmu_intclear = EXYNOS5433_TMU_REG_INTPEND; 801 } else { 802 tmu_intstat = EXYNOS_TMU_REG_INTSTAT; 803 tmu_intclear = EXYNOS_TMU_REG_INTCLEAR; 804 } 805 806 val_irq = readl(data->base + tmu_intstat); 807 /* 808 * Clear the interrupts. Please note that the documentation for 809 * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly 810 * states that INTCLEAR register has a different placing of bits 811 * responsible for FALL IRQs than INTSTAT register. Exynos5420 812 * and Exynos5440 documentation is correct (Exynos4210 doesn't 813 * support FALL IRQs at all). 814 */ 815 writel(val_irq, data->base + tmu_intclear); 816 } 817 818 static irqreturn_t exynos_tmu_irq(int irq, void *id) 819 { 820 struct exynos_tmu_data *data = id; 821 822 disable_irq_nosync(irq); 823 schedule_work(&data->irq_work); 824 825 return IRQ_HANDLED; 826 } 827 828 static const struct of_device_id exynos_tmu_match[] = { 829 { 830 .compatible = "samsung,exynos3250-tmu", 831 .data = (const void *)SOC_ARCH_EXYNOS3250, 832 }, { 833 .compatible = "samsung,exynos4210-tmu", 834 .data = (const void *)SOC_ARCH_EXYNOS4210, 835 }, { 836 .compatible = "samsung,exynos4412-tmu", 837 .data = (const void *)SOC_ARCH_EXYNOS4412, 838 }, { 839 .compatible = "samsung,exynos5250-tmu", 840 .data = (const void *)SOC_ARCH_EXYNOS5250, 841 }, { 842 .compatible = "samsung,exynos5260-tmu", 843 .data = (const void *)SOC_ARCH_EXYNOS5260, 844 }, { 845 .compatible = "samsung,exynos5420-tmu", 846 .data = (const void *)SOC_ARCH_EXYNOS5420, 847 }, { 848 .compatible = "samsung,exynos5420-tmu-ext-triminfo", 849 .data = (const void *)SOC_ARCH_EXYNOS5420_TRIMINFO, 850 }, { 851 .compatible = "samsung,exynos5433-tmu", 852 .data = (const void *)SOC_ARCH_EXYNOS5433, 853 }, { 854 .compatible = "samsung,exynos7-tmu", 855 .data = (const void *)SOC_ARCH_EXYNOS7, 856 }, 857 { }, 858 }; 859 MODULE_DEVICE_TABLE(of, exynos_tmu_match); 860 861 static int exynos_map_dt_data(struct platform_device *pdev) 862 { 863 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 864 struct resource res; 865 866 if (!data || !pdev->dev.of_node) 867 return -ENODEV; 868 869 data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl"); 870 if (data->id < 0) 871 data->id = 0; 872 873 data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0); 874 if (data->irq <= 0) { 875 dev_err(&pdev->dev, "failed to get IRQ\n"); 876 return -ENODEV; 877 } 878 879 if (of_address_to_resource(pdev->dev.of_node, 0, &res)) { 880 dev_err(&pdev->dev, "failed to get Resource 0\n"); 881 return -ENODEV; 882 } 883 884 data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res)); 885 if (!data->base) { 886 dev_err(&pdev->dev, "Failed to ioremap memory\n"); 887 return -EADDRNOTAVAIL; 888 } 889 890 data->soc = (uintptr_t)of_device_get_match_data(&pdev->dev); 891 892 switch (data->soc) { 893 case SOC_ARCH_EXYNOS4210: 894 data->tmu_set_trip_temp = exynos4210_tmu_set_trip_temp; 895 data->tmu_set_trip_hyst = exynos4210_tmu_set_trip_hyst; 896 data->tmu_initialize = exynos4210_tmu_initialize; 897 data->tmu_control = exynos4210_tmu_control; 898 data->tmu_read = exynos4210_tmu_read; 899 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; 900 data->ntrip = 4; 901 data->gain = 15; 902 data->reference_voltage = 7; 903 data->efuse_value = 55; 904 data->min_efuse_value = 40; 905 data->max_efuse_value = 100; 906 break; 907 case SOC_ARCH_EXYNOS3250: 908 case SOC_ARCH_EXYNOS4412: 909 case SOC_ARCH_EXYNOS5250: 910 case SOC_ARCH_EXYNOS5260: 911 case SOC_ARCH_EXYNOS5420: 912 case SOC_ARCH_EXYNOS5420_TRIMINFO: 913 data->tmu_set_trip_temp = exynos4412_tmu_set_trip_temp; 914 data->tmu_set_trip_hyst = exynos4412_tmu_set_trip_hyst; 915 data->tmu_initialize = exynos4412_tmu_initialize; 916 data->tmu_control = exynos4210_tmu_control; 917 data->tmu_read = exynos4412_tmu_read; 918 data->tmu_set_emulation = exynos4412_tmu_set_emulation; 919 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; 920 data->ntrip = 4; 921 data->gain = 8; 922 data->reference_voltage = 16; 923 data->efuse_value = 55; 924 if (data->soc != SOC_ARCH_EXYNOS5420 && 925 data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO) 926 data->min_efuse_value = 40; 927 else 928 data->min_efuse_value = 0; 929 data->max_efuse_value = 100; 930 break; 931 case SOC_ARCH_EXYNOS5433: 932 data->tmu_set_trip_temp = exynos5433_tmu_set_trip_temp; 933 data->tmu_set_trip_hyst = exynos5433_tmu_set_trip_hyst; 934 data->tmu_initialize = exynos5433_tmu_initialize; 935 data->tmu_control = exynos5433_tmu_control; 936 data->tmu_read = exynos4412_tmu_read; 937 data->tmu_set_emulation = exynos4412_tmu_set_emulation; 938 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; 939 data->ntrip = 8; 940 data->gain = 8; 941 if (res.start == EXYNOS5433_G3D_BASE) 942 data->reference_voltage = 23; 943 else 944 data->reference_voltage = 16; 945 data->efuse_value = 75; 946 data->min_efuse_value = 40; 947 data->max_efuse_value = 150; 948 break; 949 case SOC_ARCH_EXYNOS7: 950 data->tmu_set_trip_temp = exynos7_tmu_set_trip_temp; 951 data->tmu_set_trip_hyst = exynos7_tmu_set_trip_hyst; 952 data->tmu_initialize = exynos7_tmu_initialize; 953 data->tmu_control = exynos7_tmu_control; 954 data->tmu_read = exynos7_tmu_read; 955 data->tmu_set_emulation = exynos4412_tmu_set_emulation; 956 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; 957 data->ntrip = 8; 958 data->gain = 9; 959 data->reference_voltage = 17; 960 data->efuse_value = 75; 961 data->min_efuse_value = 15; 962 data->max_efuse_value = 100; 963 break; 964 default: 965 dev_err(&pdev->dev, "Platform not supported\n"); 966 return -EINVAL; 967 } 968 969 data->cal_type = TYPE_ONE_POINT_TRIMMING; 970 971 /* 972 * Check if the TMU shares some registers and then try to map the 973 * memory of common registers. 974 */ 975 if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO) 976 return 0; 977 978 if (of_address_to_resource(pdev->dev.of_node, 1, &res)) { 979 dev_err(&pdev->dev, "failed to get Resource 1\n"); 980 return -ENODEV; 981 } 982 983 data->base_second = devm_ioremap(&pdev->dev, res.start, 984 resource_size(&res)); 985 if (!data->base_second) { 986 dev_err(&pdev->dev, "Failed to ioremap memory\n"); 987 return -ENOMEM; 988 } 989 990 return 0; 991 } 992 993 static const struct thermal_zone_device_ops exynos_sensor_ops = { 994 .get_temp = exynos_get_temp, 995 .set_emul_temp = exynos_tmu_set_emulation, 996 }; 997 998 static int exynos_tmu_probe(struct platform_device *pdev) 999 { 1000 struct exynos_tmu_data *data; 1001 int ret; 1002 1003 data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data), 1004 GFP_KERNEL); 1005 if (!data) 1006 return -ENOMEM; 1007 1008 platform_set_drvdata(pdev, data); 1009 mutex_init(&data->lock); 1010 1011 /* 1012 * Try enabling the regulator if found 1013 * TODO: Add regulator as an SOC feature, so that regulator enable 1014 * is a compulsory call. 1015 */ 1016 data->regulator = devm_regulator_get_optional(&pdev->dev, "vtmu"); 1017 if (!IS_ERR(data->regulator)) { 1018 ret = regulator_enable(data->regulator); 1019 if (ret) { 1020 dev_err(&pdev->dev, "failed to enable vtmu\n"); 1021 return ret; 1022 } 1023 } else { 1024 if (PTR_ERR(data->regulator) == -EPROBE_DEFER) 1025 return -EPROBE_DEFER; 1026 dev_info(&pdev->dev, "Regulator node (vtmu) not found\n"); 1027 } 1028 1029 ret = exynos_map_dt_data(pdev); 1030 if (ret) 1031 goto err_sensor; 1032 1033 INIT_WORK(&data->irq_work, exynos_tmu_work); 1034 1035 data->clk = devm_clk_get(&pdev->dev, "tmu_apbif"); 1036 if (IS_ERR(data->clk)) { 1037 dev_err(&pdev->dev, "Failed to get clock\n"); 1038 ret = PTR_ERR(data->clk); 1039 goto err_sensor; 1040 } 1041 1042 data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif"); 1043 if (IS_ERR(data->clk_sec)) { 1044 if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) { 1045 dev_err(&pdev->dev, "Failed to get triminfo clock\n"); 1046 ret = PTR_ERR(data->clk_sec); 1047 goto err_sensor; 1048 } 1049 } else { 1050 ret = clk_prepare(data->clk_sec); 1051 if (ret) { 1052 dev_err(&pdev->dev, "Failed to get clock\n"); 1053 goto err_sensor; 1054 } 1055 } 1056 1057 ret = clk_prepare(data->clk); 1058 if (ret) { 1059 dev_err(&pdev->dev, "Failed to get clock\n"); 1060 goto err_clk_sec; 1061 } 1062 1063 switch (data->soc) { 1064 case SOC_ARCH_EXYNOS5433: 1065 case SOC_ARCH_EXYNOS7: 1066 data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk"); 1067 if (IS_ERR(data->sclk)) { 1068 dev_err(&pdev->dev, "Failed to get sclk\n"); 1069 ret = PTR_ERR(data->sclk); 1070 goto err_clk; 1071 } else { 1072 ret = clk_prepare_enable(data->sclk); 1073 if (ret) { 1074 dev_err(&pdev->dev, "Failed to enable sclk\n"); 1075 goto err_clk; 1076 } 1077 } 1078 break; 1079 default: 1080 break; 1081 } 1082 1083 /* 1084 * data->tzd must be registered before calling exynos_tmu_initialize(), 1085 * requesting irq and calling exynos_tmu_control(). 1086 */ 1087 data->tzd = devm_thermal_of_zone_register(&pdev->dev, 0, data, 1088 &exynos_sensor_ops); 1089 if (IS_ERR(data->tzd)) { 1090 ret = PTR_ERR(data->tzd); 1091 if (ret != -EPROBE_DEFER) 1092 dev_err(&pdev->dev, "Failed to register sensor: %d\n", 1093 ret); 1094 goto err_sclk; 1095 } 1096 1097 ret = exynos_tmu_initialize(pdev); 1098 if (ret) { 1099 dev_err(&pdev->dev, "Failed to initialize TMU\n"); 1100 goto err_sclk; 1101 } 1102 1103 ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq, 1104 IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data); 1105 if (ret) { 1106 dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); 1107 goto err_sclk; 1108 } 1109 1110 exynos_tmu_control(pdev, true); 1111 return 0; 1112 1113 err_sclk: 1114 clk_disable_unprepare(data->sclk); 1115 err_clk: 1116 clk_unprepare(data->clk); 1117 err_clk_sec: 1118 if (!IS_ERR(data->clk_sec)) 1119 clk_unprepare(data->clk_sec); 1120 err_sensor: 1121 if (!IS_ERR(data->regulator)) 1122 regulator_disable(data->regulator); 1123 1124 return ret; 1125 } 1126 1127 static int exynos_tmu_remove(struct platform_device *pdev) 1128 { 1129 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 1130 1131 exynos_tmu_control(pdev, false); 1132 1133 clk_disable_unprepare(data->sclk); 1134 clk_unprepare(data->clk); 1135 if (!IS_ERR(data->clk_sec)) 1136 clk_unprepare(data->clk_sec); 1137 1138 if (!IS_ERR(data->regulator)) 1139 regulator_disable(data->regulator); 1140 1141 return 0; 1142 } 1143 1144 #ifdef CONFIG_PM_SLEEP 1145 static int exynos_tmu_suspend(struct device *dev) 1146 { 1147 exynos_tmu_control(to_platform_device(dev), false); 1148 1149 return 0; 1150 } 1151 1152 static int exynos_tmu_resume(struct device *dev) 1153 { 1154 struct platform_device *pdev = to_platform_device(dev); 1155 1156 exynos_tmu_initialize(pdev); 1157 exynos_tmu_control(pdev, true); 1158 1159 return 0; 1160 } 1161 1162 static SIMPLE_DEV_PM_OPS(exynos_tmu_pm, 1163 exynos_tmu_suspend, exynos_tmu_resume); 1164 #define EXYNOS_TMU_PM (&exynos_tmu_pm) 1165 #else 1166 #define EXYNOS_TMU_PM NULL 1167 #endif 1168 1169 static struct platform_driver exynos_tmu_driver = { 1170 .driver = { 1171 .name = "exynos-tmu", 1172 .pm = EXYNOS_TMU_PM, 1173 .of_match_table = exynos_tmu_match, 1174 }, 1175 .probe = exynos_tmu_probe, 1176 .remove = exynos_tmu_remove, 1177 }; 1178 1179 module_platform_driver(exynos_tmu_driver); 1180 1181 MODULE_DESCRIPTION("Exynos TMU Driver"); 1182 MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>"); 1183 MODULE_LICENSE("GPL"); 1184 MODULE_ALIAS("platform:exynos-tmu"); 1185