1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Renesas RZ/G2L TSU Thermal Sensor Driver
4  *
5  * Copyright (C) 2021 Renesas Electronics Corporation
6  */
7 #include <linux/delay.h>
8 #include <linux/err.h>
9 #include <linux/io.h>
10 #include <linux/iopoll.h>
11 #include <linux/math.h>
12 #include <linux/module.h>
13 #include <linux/of_device.h>
14 #include <linux/platform_device.h>
15 #include <linux/pm_runtime.h>
16 #include <linux/reset.h>
17 #include <linux/thermal.h>
18 #include <linux/units.h>
19 
20 #include "thermal_hwmon.h"
21 
22 #define CTEMP_MASK	0xFFF
23 
24 /* default calibration values, if FUSE values are missing */
25 #define SW_CALIB0_VAL	3148
26 #define SW_CALIB1_VAL	503
27 
28 /* Register offsets */
29 #define TSU_SM		0x00
30 #define TSU_ST		0x04
31 #define TSU_SAD		0x0C
32 #define TSU_SS		0x10
33 
34 #define OTPTSUTRIM_REG(n)	(0x18 + ((n) * 0x4))
35 #define OTPTSUTRIM_EN_MASK	BIT(31)
36 #define OTPTSUTRIM_MASK		GENMASK(11, 0)
37 
38 /* Sensor Mode Register(TSU_SM) */
39 #define TSU_SM_EN_TS		BIT(0)
40 #define TSU_SM_ADC_EN_TS	BIT(1)
41 #define TSU_SM_NORMAL_MODE	(TSU_SM_EN_TS | TSU_SM_ADC_EN_TS)
42 
43 /* TSU_ST bits */
44 #define TSU_ST_START		BIT(0)
45 
46 #define TSU_SS_CONV_RUNNING	BIT(0)
47 
48 #define TS_CODE_AVE_SCALE(x)	((x) * 1000000)
49 #define MCELSIUS(temp)		((temp) * MILLIDEGREE_PER_DEGREE)
50 #define TS_CODE_CAP_TIMES	8	/* Total number of ADC data samples */
51 
52 #define RZG2L_THERMAL_GRAN	500	/* milli Celsius */
53 #define RZG2L_TSU_SS_TIMEOUT_US	1000
54 
55 #define CURVATURE_CORRECTION_CONST	13
56 
57 struct rzg2l_thermal_priv {
58 	struct device *dev;
59 	void __iomem *base;
60 	struct thermal_zone_device *zone;
61 	struct reset_control *rstc;
62 	u32 calib0, calib1;
63 };
64 
65 static inline u32 rzg2l_thermal_read(struct rzg2l_thermal_priv *priv, u32 reg)
66 {
67 	return ioread32(priv->base + reg);
68 }
69 
70 static inline void rzg2l_thermal_write(struct rzg2l_thermal_priv *priv, u32 reg,
71 				       u32 data)
72 {
73 	iowrite32(data, priv->base + reg);
74 }
75 
76 static int rzg2l_thermal_get_temp(void *devdata, int *temp)
77 {
78 	struct rzg2l_thermal_priv *priv = devdata;
79 	u32 result = 0, dsensor, ts_code_ave;
80 	int val, i;
81 
82 	for (i = 0; i < TS_CODE_CAP_TIMES ; i++) {
83 		/*
84 		 * TSU repeats measurement at 20 microseconds intervals and
85 		 * automatically updates the results of measurement. As per
86 		 * the HW manual for measuring temperature we need to read 8
87 		 * values consecutively and then take the average.
88 		 * ts_code_ave = (ts_code[0] + ⋯ + ts_code[7]) / 8
89 		 */
90 		result += rzg2l_thermal_read(priv, TSU_SAD) & CTEMP_MASK;
91 		usleep_range(20, 30);
92 	}
93 
94 	ts_code_ave = result / TS_CODE_CAP_TIMES;
95 
96 	/*
97 	 * Calculate actual sensor value by applying curvature correction formula
98 	 * dsensor = ts_code_ave / (1 + ts_code_ave * 0.000013). Here we are doing
99 	 * integer calculation by scaling all the values by 1000000.
100 	 */
101 	dsensor = TS_CODE_AVE_SCALE(ts_code_ave) /
102 		(TS_CODE_AVE_SCALE(1) + (ts_code_ave * CURVATURE_CORRECTION_CONST));
103 
104 	/*
105 	 * The temperature Tj is calculated by the formula
106 	 * Tj = (dsensor − calib1) * 165/ (calib0 − calib1) − 40
107 	 * where calib0 and calib1 are the calibration values.
108 	 */
109 	val = ((dsensor - priv->calib1) * (MCELSIUS(165) /
110 		(priv->calib0 - priv->calib1))) - MCELSIUS(40);
111 
112 	*temp = roundup(val, RZG2L_THERMAL_GRAN);
113 
114 	return 0;
115 }
116 
117 static const struct thermal_zone_of_device_ops rzg2l_tz_of_ops = {
118 	.get_temp = rzg2l_thermal_get_temp,
119 };
120 
121 static int rzg2l_thermal_init(struct rzg2l_thermal_priv *priv)
122 {
123 	u32 reg_val;
124 
125 	rzg2l_thermal_write(priv, TSU_SM, TSU_SM_NORMAL_MODE);
126 	rzg2l_thermal_write(priv, TSU_ST, 0);
127 
128 	/*
129 	 * Before setting the START bit, TSU should be in normal operating
130 	 * mode. As per the HW manual, it will take 60 µs to place the TSU
131 	 * into normal operating mode.
132 	 */
133 	usleep_range(60, 80);
134 
135 	reg_val = rzg2l_thermal_read(priv, TSU_ST);
136 	reg_val |= TSU_ST_START;
137 	rzg2l_thermal_write(priv, TSU_ST, reg_val);
138 
139 	return readl_poll_timeout(priv->base + TSU_SS, reg_val,
140 				  reg_val == TSU_SS_CONV_RUNNING, 50,
141 				  RZG2L_TSU_SS_TIMEOUT_US);
142 }
143 
144 static void rzg2l_thermal_reset_assert_pm_disable_put(struct platform_device *pdev)
145 {
146 	struct rzg2l_thermal_priv *priv = dev_get_drvdata(&pdev->dev);
147 
148 	pm_runtime_put(&pdev->dev);
149 	pm_runtime_disable(&pdev->dev);
150 	reset_control_assert(priv->rstc);
151 }
152 
153 static int rzg2l_thermal_remove(struct platform_device *pdev)
154 {
155 	struct rzg2l_thermal_priv *priv = dev_get_drvdata(&pdev->dev);
156 
157 	thermal_remove_hwmon_sysfs(priv->zone);
158 	rzg2l_thermal_reset_assert_pm_disable_put(pdev);
159 
160 	return 0;
161 }
162 
163 static int rzg2l_thermal_probe(struct platform_device *pdev)
164 {
165 	struct thermal_zone_device *zone;
166 	struct rzg2l_thermal_priv *priv;
167 	struct device *dev = &pdev->dev;
168 	int ret;
169 
170 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
171 	if (!priv)
172 		return -ENOMEM;
173 
174 	priv->base = devm_platform_ioremap_resource(pdev, 0);
175 	if (IS_ERR(priv->base))
176 		return PTR_ERR(priv->base);
177 
178 	priv->dev = dev;
179 	priv->rstc = devm_reset_control_get_exclusive(dev, NULL);
180 	if (IS_ERR(priv->rstc))
181 		return dev_err_probe(dev, PTR_ERR(priv->rstc),
182 				     "failed to get cpg reset");
183 
184 	ret = reset_control_deassert(priv->rstc);
185 	if (ret)
186 		return dev_err_probe(dev, ret, "failed to deassert");
187 
188 	pm_runtime_enable(dev);
189 	pm_runtime_get_sync(dev);
190 
191 	priv->calib0 = rzg2l_thermal_read(priv, OTPTSUTRIM_REG(0));
192 	if (priv->calib0 & OTPTSUTRIM_EN_MASK)
193 		priv->calib0 &= OTPTSUTRIM_MASK;
194 	else
195 		priv->calib0 = SW_CALIB0_VAL;
196 
197 	priv->calib1 = rzg2l_thermal_read(priv, OTPTSUTRIM_REG(1));
198 	if (priv->calib1 & OTPTSUTRIM_EN_MASK)
199 		priv->calib1 &= OTPTSUTRIM_MASK;
200 	else
201 		priv->calib1 = SW_CALIB1_VAL;
202 
203 	platform_set_drvdata(pdev, priv);
204 	ret = rzg2l_thermal_init(priv);
205 	if (ret) {
206 		dev_err(dev, "Failed to start TSU");
207 		goto err;
208 	}
209 
210 	zone = devm_thermal_zone_of_sensor_register(dev, 0, priv,
211 						    &rzg2l_tz_of_ops);
212 	if (IS_ERR(zone)) {
213 		dev_err(dev, "Can't register thermal zone");
214 		ret = PTR_ERR(zone);
215 		goto err;
216 	}
217 
218 	priv->zone = zone;
219 	priv->zone->tzp->no_hwmon = false;
220 	ret = thermal_add_hwmon_sysfs(priv->zone);
221 	if (ret)
222 		goto err;
223 
224 	dev_dbg(dev, "TSU probed with %s calibration values",
225 		rzg2l_thermal_read(priv, OTPTSUTRIM_REG(0)) ?  "hw" : "sw");
226 
227 	return 0;
228 
229 err:
230 	rzg2l_thermal_reset_assert_pm_disable_put(pdev);
231 	return ret;
232 }
233 
234 static const struct of_device_id rzg2l_thermal_dt_ids[] = {
235 	{ .compatible = "renesas,rzg2l-tsu", },
236 	{ /* sentinel */ }
237 };
238 MODULE_DEVICE_TABLE(of, rzg2l_thermal_dt_ids);
239 
240 static struct platform_driver rzg2l_thermal_driver = {
241 	.driver = {
242 		.name = "rzg2l_thermal",
243 		.of_match_table = rzg2l_thermal_dt_ids,
244 	},
245 	.probe = rzg2l_thermal_probe,
246 	.remove = rzg2l_thermal_remove,
247 };
248 module_platform_driver(rzg2l_thermal_driver);
249 
250 MODULE_DESCRIPTION("Renesas RZ/G2L TSU Thermal Sensor Driver");
251 MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
252 MODULE_LICENSE("GPL v2");
253