xref: /openbmc/linux/drivers/thermal/qcom/tsens-v1.c (revision dc6a81c3)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (c) 2019, Linaro Limited
4  */
5 
6 #include <linux/bitops.h>
7 #include <linux/regmap.h>
8 #include <linux/delay.h>
9 #include <linux/slab.h>
10 #include "tsens.h"
11 
12 /* ----- SROT ------ */
13 #define SROT_HW_VER_OFF	0x0000
14 #define SROT_CTRL_OFF		0x0004
15 
16 /* ----- TM ------ */
17 #define TM_INT_EN_OFF				0x0000
18 #define TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF	0x0004
19 #define TM_Sn_STATUS_OFF			0x0044
20 #define TM_TRDY_OFF				0x0084
21 #define TM_HIGH_LOW_INT_STATUS_OFF		0x0088
22 #define TM_HIGH_LOW_Sn_INT_THRESHOLD_OFF	0x0090
23 
24 /* eeprom layout data for msm8956/76 (v1) */
25 #define MSM8976_BASE0_MASK	0xff
26 #define MSM8976_BASE1_MASK	0xff
27 #define MSM8976_BASE1_SHIFT	8
28 
29 #define MSM8976_S0_P1_MASK	0x3f00
30 #define MSM8976_S1_P1_MASK	0x3f00000
31 #define MSM8976_S2_P1_MASK	0x3f
32 #define MSM8976_S3_P1_MASK	0x3f000
33 #define MSM8976_S4_P1_MASK	0x3f00
34 #define MSM8976_S5_P1_MASK	0x3f00000
35 #define MSM8976_S6_P1_MASK	0x3f
36 #define MSM8976_S7_P1_MASK	0x3f000
37 #define MSM8976_S8_P1_MASK	0x1f8
38 #define MSM8976_S9_P1_MASK	0x1f8000
39 #define MSM8976_S10_P1_MASK	0xf8000000
40 #define MSM8976_S10_P1_MASK_1	0x1
41 
42 #define MSM8976_S0_P2_MASK	0xfc000
43 #define MSM8976_S1_P2_MASK	0xfc000000
44 #define MSM8976_S2_P2_MASK	0xfc0
45 #define MSM8976_S3_P2_MASK	0xfc0000
46 #define MSM8976_S4_P2_MASK	0xfc000
47 #define MSM8976_S5_P2_MASK	0xfc000000
48 #define MSM8976_S6_P2_MASK	0xfc0
49 #define MSM8976_S7_P2_MASK	0xfc0000
50 #define MSM8976_S8_P2_MASK	0x7e00
51 #define MSM8976_S9_P2_MASK	0x7e00000
52 #define MSM8976_S10_P2_MASK	0x7e
53 
54 #define MSM8976_S0_P1_SHIFT	8
55 #define MSM8976_S1_P1_SHIFT	20
56 #define MSM8976_S2_P1_SHIFT	0
57 #define MSM8976_S3_P1_SHIFT	12
58 #define MSM8976_S4_P1_SHIFT	8
59 #define MSM8976_S5_P1_SHIFT	20
60 #define MSM8976_S6_P1_SHIFT	0
61 #define MSM8976_S7_P1_SHIFT	12
62 #define MSM8976_S8_P1_SHIFT	3
63 #define MSM8976_S9_P1_SHIFT	15
64 #define MSM8976_S10_P1_SHIFT	27
65 #define MSM8976_S10_P1_SHIFT_1	0
66 
67 #define MSM8976_S0_P2_SHIFT	14
68 #define MSM8976_S1_P2_SHIFT	26
69 #define MSM8976_S2_P2_SHIFT	6
70 #define MSM8976_S3_P2_SHIFT	18
71 #define MSM8976_S4_P2_SHIFT	14
72 #define MSM8976_S5_P2_SHIFT	26
73 #define MSM8976_S6_P2_SHIFT	6
74 #define MSM8976_S7_P2_SHIFT	18
75 #define MSM8976_S8_P2_SHIFT	9
76 #define MSM8976_S9_P2_SHIFT	21
77 #define MSM8976_S10_P2_SHIFT	1
78 
79 #define MSM8976_CAL_SEL_MASK	0x3
80 
81 #define MSM8976_CAL_DEGC_PT1	30
82 #define MSM8976_CAL_DEGC_PT2	120
83 #define MSM8976_SLOPE_FACTOR	1000
84 #define MSM8976_SLOPE_DEFAULT	3200
85 
86 /* eeprom layout data for qcs404/405 (v1) */
87 #define BASE0_MASK	0x000007f8
88 #define BASE1_MASK	0x0007f800
89 #define BASE0_SHIFT	3
90 #define BASE1_SHIFT	11
91 
92 #define S0_P1_MASK	0x0000003f
93 #define S1_P1_MASK	0x0003f000
94 #define S2_P1_MASK	0x3f000000
95 #define S3_P1_MASK	0x000003f0
96 #define S4_P1_MASK	0x003f0000
97 #define S5_P1_MASK	0x0000003f
98 #define S6_P1_MASK	0x0003f000
99 #define S7_P1_MASK	0x3f000000
100 #define S8_P1_MASK	0x000003f0
101 #define S9_P1_MASK	0x003f0000
102 
103 #define S0_P2_MASK	0x00000fc0
104 #define S1_P2_MASK	0x00fc0000
105 #define S2_P2_MASK_1_0	0xc0000000
106 #define S2_P2_MASK_5_2	0x0000000f
107 #define S3_P2_MASK	0x0000fc00
108 #define S4_P2_MASK	0x0fc00000
109 #define S5_P2_MASK	0x00000fc0
110 #define S6_P2_MASK	0x00fc0000
111 #define S7_P2_MASK_1_0	0xc0000000
112 #define S7_P2_MASK_5_2	0x0000000f
113 #define S8_P2_MASK	0x0000fc00
114 #define S9_P2_MASK	0x0fc00000
115 
116 #define S0_P1_SHIFT	0
117 #define S0_P2_SHIFT	6
118 #define S1_P1_SHIFT	12
119 #define S1_P2_SHIFT	18
120 #define S2_P1_SHIFT	24
121 #define S2_P2_SHIFT_1_0	30
122 
123 #define S2_P2_SHIFT_5_2	0
124 #define S3_P1_SHIFT	4
125 #define S3_P2_SHIFT	10
126 #define S4_P1_SHIFT	16
127 #define S4_P2_SHIFT	22
128 
129 #define S5_P1_SHIFT	0
130 #define S5_P2_SHIFT	6
131 #define S6_P1_SHIFT	12
132 #define S6_P2_SHIFT	18
133 #define S7_P1_SHIFT	24
134 #define S7_P2_SHIFT_1_0	30
135 
136 #define S7_P2_SHIFT_5_2	0
137 #define S8_P1_SHIFT	4
138 #define S8_P2_SHIFT	10
139 #define S9_P1_SHIFT	16
140 #define S9_P2_SHIFT	22
141 
142 #define CAL_SEL_MASK	7
143 #define CAL_SEL_SHIFT	0
144 
145 static void compute_intercept_slope_8976(struct tsens_priv *priv,
146 			      u32 *p1, u32 *p2, u32 mode)
147 {
148 	int i;
149 
150 	priv->sensor[0].slope = 3313;
151 	priv->sensor[1].slope = 3275;
152 	priv->sensor[2].slope = 3320;
153 	priv->sensor[3].slope = 3246;
154 	priv->sensor[4].slope = 3279;
155 	priv->sensor[5].slope = 3257;
156 	priv->sensor[6].slope = 3234;
157 	priv->sensor[7].slope = 3269;
158 	priv->sensor[8].slope = 3255;
159 	priv->sensor[9].slope = 3239;
160 	priv->sensor[10].slope = 3286;
161 
162 	for (i = 0; i < priv->num_sensors; i++) {
163 		priv->sensor[i].offset = (p1[i] * MSM8976_SLOPE_FACTOR) -
164 				(MSM8976_CAL_DEGC_PT1 *
165 				priv->sensor[i].slope);
166 	}
167 }
168 
169 static int calibrate_v1(struct tsens_priv *priv)
170 {
171 	u32 base0 = 0, base1 = 0;
172 	u32 p1[10], p2[10];
173 	u32 mode = 0, lsb = 0, msb = 0;
174 	u32 *qfprom_cdata;
175 	int i;
176 
177 	qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
178 	if (IS_ERR(qfprom_cdata))
179 		return PTR_ERR(qfprom_cdata);
180 
181 	mode = (qfprom_cdata[4] & CAL_SEL_MASK) >> CAL_SEL_SHIFT;
182 	dev_dbg(priv->dev, "calibration mode is %d\n", mode);
183 
184 	switch (mode) {
185 	case TWO_PT_CALIB:
186 		base1 = (qfprom_cdata[4] & BASE1_MASK) >> BASE1_SHIFT;
187 		p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT;
188 		p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT;
189 		/* This value is split over two registers, 2 bits and 4 bits */
190 		lsb   = (qfprom_cdata[0] & S2_P2_MASK_1_0) >> S2_P2_SHIFT_1_0;
191 		msb   = (qfprom_cdata[1] & S2_P2_MASK_5_2) >> S2_P2_SHIFT_5_2;
192 		p2[2] = msb << 2 | lsb;
193 		p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT;
194 		p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT;
195 		p2[5] = (qfprom_cdata[2] & S5_P2_MASK) >> S5_P2_SHIFT;
196 		p2[6] = (qfprom_cdata[2] & S6_P2_MASK) >> S6_P2_SHIFT;
197 		/* This value is split over two registers, 2 bits and 4 bits */
198 		lsb   = (qfprom_cdata[2] & S7_P2_MASK_1_0) >> S7_P2_SHIFT_1_0;
199 		msb   = (qfprom_cdata[3] & S7_P2_MASK_5_2) >> S7_P2_SHIFT_5_2;
200 		p2[7] = msb << 2 | lsb;
201 		p2[8] = (qfprom_cdata[3] & S8_P2_MASK) >> S8_P2_SHIFT;
202 		p2[9] = (qfprom_cdata[3] & S9_P2_MASK) >> S9_P2_SHIFT;
203 		for (i = 0; i < priv->num_sensors; i++)
204 			p2[i] = ((base1 + p2[i]) << 2);
205 		/* Fall through */
206 	case ONE_PT_CALIB2:
207 		base0 = (qfprom_cdata[4] & BASE0_MASK) >> BASE0_SHIFT;
208 		p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT;
209 		p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT;
210 		p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT;
211 		p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT;
212 		p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT;
213 		p1[5] = (qfprom_cdata[2] & S5_P1_MASK) >> S5_P1_SHIFT;
214 		p1[6] = (qfprom_cdata[2] & S6_P1_MASK) >> S6_P1_SHIFT;
215 		p1[7] = (qfprom_cdata[2] & S7_P1_MASK) >> S7_P1_SHIFT;
216 		p1[8] = (qfprom_cdata[3] & S8_P1_MASK) >> S8_P1_SHIFT;
217 		p1[9] = (qfprom_cdata[3] & S9_P1_MASK) >> S9_P1_SHIFT;
218 		for (i = 0; i < priv->num_sensors; i++)
219 			p1[i] = (((base0) + p1[i]) << 2);
220 		break;
221 	default:
222 		for (i = 0; i < priv->num_sensors; i++) {
223 			p1[i] = 500;
224 			p2[i] = 780;
225 		}
226 		break;
227 	}
228 
229 	compute_intercept_slope(priv, p1, p2, mode);
230 	kfree(qfprom_cdata);
231 
232 	return 0;
233 }
234 
235 static int calibrate_8976(struct tsens_priv *priv)
236 {
237 	int base0 = 0, base1 = 0, i;
238 	u32 p1[11], p2[11];
239 	int mode = 0, tmp = 0;
240 	u32 *qfprom_cdata;
241 
242 	qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
243 	if (IS_ERR(qfprom_cdata))
244 		return PTR_ERR(qfprom_cdata);
245 
246 	mode = (qfprom_cdata[4] & MSM8976_CAL_SEL_MASK);
247 	dev_dbg(priv->dev, "calibration mode is %d\n", mode);
248 
249 	switch (mode) {
250 	case TWO_PT_CALIB:
251 		base1 = (qfprom_cdata[2] & MSM8976_BASE1_MASK) >> MSM8976_BASE1_SHIFT;
252 		p2[0] = (qfprom_cdata[0] & MSM8976_S0_P2_MASK) >> MSM8976_S0_P2_SHIFT;
253 		p2[1] = (qfprom_cdata[0] & MSM8976_S1_P2_MASK) >> MSM8976_S1_P2_SHIFT;
254 		p2[2] = (qfprom_cdata[1] & MSM8976_S2_P2_MASK) >> MSM8976_S2_P2_SHIFT;
255 		p2[3] = (qfprom_cdata[1] & MSM8976_S3_P2_MASK) >> MSM8976_S3_P2_SHIFT;
256 		p2[4] = (qfprom_cdata[2] & MSM8976_S4_P2_MASK) >> MSM8976_S4_P2_SHIFT;
257 		p2[5] = (qfprom_cdata[2] & MSM8976_S5_P2_MASK) >> MSM8976_S5_P2_SHIFT;
258 		p2[6] = (qfprom_cdata[3] & MSM8976_S6_P2_MASK) >> MSM8976_S6_P2_SHIFT;
259 		p2[7] = (qfprom_cdata[3] & MSM8976_S7_P2_MASK) >> MSM8976_S7_P2_SHIFT;
260 		p2[8] = (qfprom_cdata[4] & MSM8976_S8_P2_MASK) >> MSM8976_S8_P2_SHIFT;
261 		p2[9] = (qfprom_cdata[4] & MSM8976_S9_P2_MASK) >> MSM8976_S9_P2_SHIFT;
262 		p2[10] = (qfprom_cdata[5] & MSM8976_S10_P2_MASK) >> MSM8976_S10_P2_SHIFT;
263 
264 		for (i = 0; i < priv->num_sensors; i++)
265 			p2[i] = ((base1 + p2[i]) << 2);
266 		/* Fall through */
267 	case ONE_PT_CALIB2:
268 		base0 = qfprom_cdata[0] & MSM8976_BASE0_MASK;
269 		p1[0] = (qfprom_cdata[0] & MSM8976_S0_P1_MASK) >> MSM8976_S0_P1_SHIFT;
270 		p1[1] = (qfprom_cdata[0] & MSM8976_S1_P1_MASK) >> MSM8976_S1_P1_SHIFT;
271 		p1[2] = (qfprom_cdata[1] & MSM8976_S2_P1_MASK) >> MSM8976_S2_P1_SHIFT;
272 		p1[3] = (qfprom_cdata[1] & MSM8976_S3_P1_MASK) >> MSM8976_S3_P1_SHIFT;
273 		p1[4] = (qfprom_cdata[2] & MSM8976_S4_P1_MASK) >> MSM8976_S4_P1_SHIFT;
274 		p1[5] = (qfprom_cdata[2] & MSM8976_S5_P1_MASK) >> MSM8976_S5_P1_SHIFT;
275 		p1[6] = (qfprom_cdata[3] & MSM8976_S6_P1_MASK) >> MSM8976_S6_P1_SHIFT;
276 		p1[7] = (qfprom_cdata[3] & MSM8976_S7_P1_MASK) >> MSM8976_S7_P1_SHIFT;
277 		p1[8] = (qfprom_cdata[4] & MSM8976_S8_P1_MASK) >> MSM8976_S8_P1_SHIFT;
278 		p1[9] = (qfprom_cdata[4] & MSM8976_S9_P1_MASK) >> MSM8976_S9_P1_SHIFT;
279 		p1[10] = (qfprom_cdata[4] & MSM8976_S10_P1_MASK) >> MSM8976_S10_P1_SHIFT;
280 		tmp = (qfprom_cdata[5] & MSM8976_S10_P1_MASK_1) << MSM8976_S10_P1_SHIFT_1;
281 		p1[10] |= tmp;
282 
283 		for (i = 0; i < priv->num_sensors; i++)
284 			p1[i] = (((base0) + p1[i]) << 2);
285 		break;
286 	default:
287 		for (i = 0; i < priv->num_sensors; i++) {
288 			p1[i] = 500;
289 			p2[i] = 780;
290 		}
291 		break;
292 	}
293 
294 	compute_intercept_slope_8976(priv, p1, p2, mode);
295 	kfree(qfprom_cdata);
296 
297 	return 0;
298 }
299 
300 /* v1.x: msm8956,8976,qcs404,405 */
301 
302 static const struct tsens_features tsens_v1_feat = {
303 	.ver_major	= VER_1_X,
304 	.crit_int	= 0,
305 	.adc		= 1,
306 	.srot_split	= 1,
307 	.max_sensors	= 11,
308 };
309 
310 static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
311 	/* ----- SROT ------ */
312 	/* VERSION */
313 	[VER_MAJOR] = REG_FIELD(SROT_HW_VER_OFF, 28, 31),
314 	[VER_MINOR] = REG_FIELD(SROT_HW_VER_OFF, 16, 27),
315 	[VER_STEP]  = REG_FIELD(SROT_HW_VER_OFF,  0, 15),
316 	/* CTRL_OFFSET */
317 	[TSENS_EN]     = REG_FIELD(SROT_CTRL_OFF, 0,  0),
318 	[TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1,  1),
319 	[SENSOR_EN]    = REG_FIELD(SROT_CTRL_OFF, 3, 13),
320 
321 	/* ----- TM ------ */
322 	/* INTERRUPT ENABLE */
323 	[INT_EN]     = REG_FIELD(TM_INT_EN_OFF, 0, 0),
324 
325 	/* UPPER/LOWER TEMPERATURE THRESHOLDS */
326 	REG_FIELD_FOR_EACH_SENSOR11(LOW_THRESH,    TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF,  0,  9),
327 	REG_FIELD_FOR_EACH_SENSOR11(UP_THRESH,     TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 10, 19),
328 
329 	/* UPPER/LOWER INTERRUPTS [CLEAR/STATUS] */
330 	REG_FIELD_FOR_EACH_SENSOR11(LOW_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 20, 20),
331 	REG_FIELD_FOR_EACH_SENSOR11(UP_INT_CLEAR,  TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 21, 21),
332 	[LOW_INT_STATUS_0] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  0,  0),
333 	[LOW_INT_STATUS_1] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  1,  1),
334 	[LOW_INT_STATUS_2] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  2,  2),
335 	[LOW_INT_STATUS_3] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  3,  3),
336 	[LOW_INT_STATUS_4] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  4,  4),
337 	[LOW_INT_STATUS_5] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  5,  5),
338 	[LOW_INT_STATUS_6] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  6,  6),
339 	[LOW_INT_STATUS_7] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  7,  7),
340 	[UP_INT_STATUS_0]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  8,  8),
341 	[UP_INT_STATUS_1]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  9,  9),
342 	[UP_INT_STATUS_2]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 10, 10),
343 	[UP_INT_STATUS_3]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 11, 11),
344 	[UP_INT_STATUS_4]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 12, 12),
345 	[UP_INT_STATUS_5]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 13, 13),
346 	[UP_INT_STATUS_6]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 14, 14),
347 	[UP_INT_STATUS_7]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 15, 15),
348 
349 	/* NO CRITICAL INTERRUPT SUPPORT on v1 */
350 
351 	/* Sn_STATUS */
352 	REG_FIELD_FOR_EACH_SENSOR11(LAST_TEMP,    TM_Sn_STATUS_OFF,  0,  9),
353 	REG_FIELD_FOR_EACH_SENSOR11(VALID,        TM_Sn_STATUS_OFF, 14, 14),
354 	/* xxx_STATUS bits: 1 == threshold violated */
355 	REG_FIELD_FOR_EACH_SENSOR11(MIN_STATUS,   TM_Sn_STATUS_OFF, 10, 10),
356 	REG_FIELD_FOR_EACH_SENSOR11(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11),
357 	REG_FIELD_FOR_EACH_SENSOR11(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12),
358 	/* No CRITICAL field on v1.x */
359 	REG_FIELD_FOR_EACH_SENSOR11(MAX_STATUS,   TM_Sn_STATUS_OFF, 13, 13),
360 
361 	/* TRDY: 1=ready, 0=in progress */
362 	[TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0),
363 };
364 
365 static const struct tsens_ops ops_generic_v1 = {
366 	.init		= init_common,
367 	.calibrate	= calibrate_v1,
368 	.get_temp	= get_temp_tsens_valid,
369 };
370 
371 const struct tsens_plat_data data_tsens_v1 = {
372 	.ops		= &ops_generic_v1,
373 	.feat		= &tsens_v1_feat,
374 	.fields	= tsens_v1_regfields,
375 };
376 
377 static const struct tsens_ops ops_8976 = {
378 	.init		= init_common,
379 	.calibrate	= calibrate_8976,
380 	.get_temp	= get_temp_tsens_valid,
381 };
382 
383 /* Valid for both MSM8956 and MSM8976. Sensor ID 3 is unused. */
384 const struct tsens_plat_data data_8976 = {
385 	.num_sensors	= 11,
386 	.ops		= &ops_8976,
387 	.hw_ids		= (unsigned int[]){0, 1, 2, 4, 5, 6, 7, 8, 9, 10},
388 	.feat		= &tsens_v1_feat,
389 	.fields		= tsens_v1_regfields,
390 };
391