1# 2# Generic thermal sysfs drivers configuration 3# 4 5menuconfig THERMAL 6 tristate "Generic Thermal sysfs driver" 7 help 8 Generic Thermal Sysfs driver offers a generic mechanism for 9 thermal management. Usually it's made up of one or more thermal 10 zone and cooling device. 11 Each thermal zone contains its own temperature, trip points, 12 cooling devices. 13 All platforms with ACPI thermal support can use this driver. 14 If you want this support, you should say Y or M here. 15 16if THERMAL 17 18config THERMAL_HWMON 19 bool 20 prompt "Expose thermal sensors as hwmon device" 21 depends on HWMON=y || HWMON=THERMAL 22 default y 23 help 24 In case a sensor is registered with the thermal 25 framework, this option will also register it 26 as a hwmon. The sensor will then have the common 27 hwmon sysfs interface. 28 29 Say 'Y' here if you want all thermal sensors to 30 have hwmon sysfs interface too. 31 32choice 33 prompt "Default Thermal governor" 34 default THERMAL_DEFAULT_GOV_STEP_WISE 35 help 36 This option sets which thermal governor shall be loaded at 37 startup. If in doubt, select 'step_wise'. 38 39config THERMAL_DEFAULT_GOV_STEP_WISE 40 bool "step_wise" 41 select THERMAL_GOV_STEP_WISE 42 help 43 Use the step_wise governor as default. This throttles the 44 devices one step at a time. 45 46config THERMAL_DEFAULT_GOV_FAIR_SHARE 47 bool "fair_share" 48 select THERMAL_GOV_FAIR_SHARE 49 help 50 Use the fair_share governor as default. This throttles the 51 devices based on their 'contribution' to a zone. The 52 contribution should be provided through platform data. 53 54config THERMAL_DEFAULT_GOV_USER_SPACE 55 bool "user_space" 56 select THERMAL_GOV_USER_SPACE 57 help 58 Select this if you want to let the user space manage the 59 lpatform thermals. 60 61endchoice 62 63config THERMAL_GOV_FAIR_SHARE 64 bool "Fair-share thermal governor" 65 help 66 Enable this to manage platform thermals using fair-share governor. 67 68config THERMAL_GOV_STEP_WISE 69 bool "Step_wise thermal governor" 70 help 71 Enable this to manage platform thermals using a simple linear 72 73config THERMAL_GOV_USER_SPACE 74 bool "User_space thermal governor" 75 help 76 Enable this to let the user space manage the platform thermals. 77 78config CPU_THERMAL 79 bool "generic cpu cooling support" 80 depends on CPU_FREQ 81 select CPU_FREQ_TABLE 82 help 83 This implements the generic cpu cooling mechanism through frequency 84 reduction. An ACPI version of this already exists 85 (drivers/acpi/processor_thermal.c). 86 This will be useful for platforms using the generic thermal interface 87 and not the ACPI interface. 88 89 If you want this support, you should say Y here. 90 91config THERMAL_EMULATION 92 bool "Thermal emulation mode support" 93 help 94 Enable this option to make a emul_temp sysfs node in thermal zone 95 directory to support temperature emulation. With emulation sysfs node, 96 user can manually input temperature and test the different trip 97 threshold behaviour for simulation purpose. 98 99 WARNING: Be careful while enabling this option on production systems, 100 because userland can easily disable the thermal policy by simply 101 flooding this sysfs node with low temperature values. 102 103config IMX_THERMAL 104 tristate "Temperature sensor driver for Freescale i.MX SoCs" 105 depends on CPU_THERMAL 106 depends on MFD_SYSCON 107 depends on OF 108 help 109 Support for Temperature Monitor (TEMPMON) found on Freescale i.MX SoCs. 110 It supports one critical trip point and one passive trip point. The 111 cpufreq is used as the cooling device to throttle CPUs when the 112 passive trip is crossed. 113 114config SPEAR_THERMAL 115 bool "SPEAr thermal sensor driver" 116 depends on PLAT_SPEAR 117 depends on OF 118 help 119 Enable this to plug the SPEAr thermal sensor driver into the Linux 120 thermal framework 121 122config RCAR_THERMAL 123 tristate "Renesas R-Car thermal driver" 124 depends on ARCH_SHMOBILE 125 help 126 Enable this to plug the R-Car thermal sensor driver into the Linux 127 thermal framework 128 129config KIRKWOOD_THERMAL 130 tristate "Temperature sensor on Marvell Kirkwood SoCs" 131 depends on ARCH_KIRKWOOD 132 depends on OF 133 help 134 Support for the Kirkwood thermal sensor driver into the Linux thermal 135 framework. Only kirkwood 88F6282 and 88F6283 have this sensor. 136 137config DOVE_THERMAL 138 tristate "Temperature sensor on Marvell Dove SoCs" 139 depends on ARCH_DOVE 140 depends on OF 141 help 142 Support for the Dove thermal sensor driver in the Linux thermal 143 framework. 144 145config DB8500_THERMAL 146 bool "DB8500 thermal management" 147 depends on ARCH_U8500 148 default y 149 help 150 Adds DB8500 thermal management implementation according to the thermal 151 management framework. A thermal zone with several trip points will be 152 created. Cooling devices can be bound to the trip points to cool this 153 thermal zone if trip points reached. 154 155config ARMADA_THERMAL 156 tristate "Armada 370/XP thermal management" 157 depends on ARCH_MVEBU 158 depends on OF 159 help 160 Enable this option if you want to have support for thermal management 161 controller present in Armada 370 and Armada XP SoC. 162 163config DB8500_CPUFREQ_COOLING 164 tristate "DB8500 cpufreq cooling" 165 depends on ARCH_U8500 166 depends on CPU_THERMAL 167 default y 168 help 169 Adds DB8500 cpufreq cooling devices, and these cooling devices can be 170 bound to thermal zone trip points. When a trip point reached, the 171 bound cpufreq cooling device turns active to set CPU frequency low to 172 cool down the CPU. 173 174config INTEL_POWERCLAMP 175 tristate "Intel PowerClamp idle injection driver" 176 depends on THERMAL 177 depends on X86 178 depends on CPU_SUP_INTEL 179 help 180 Enable this to enable Intel PowerClamp idle injection driver. This 181 enforce idle time which results in more package C-state residency. The 182 user interface is exposed via generic thermal framework. 183 184config X86_PKG_TEMP_THERMAL 185 tristate "X86 package temperature thermal driver" 186 depends on X86_THERMAL_VECTOR 187 select THERMAL_GOV_USER_SPACE 188 default m 189 help 190 Enable this to register CPU digital sensor for package temperature as 191 thermal zone. Each package will have its own thermal zone. There are 192 two trip points which can be set by user to get notifications via thermal 193 notification methods. 194 195menu "Texas Instruments thermal drivers" 196source "drivers/thermal/ti-soc-thermal/Kconfig" 197endmenu 198 199menu "Samsung thermal drivers" 200depends on PLAT_SAMSUNG 201source "drivers/thermal/samsung/Kconfig" 202endmenu 203 204endif 205