1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /******************************************************************************* 3 * Filename: target_core_xcopy.c 4 * 5 * This file contains support for SPC-4 Extended-Copy offload with generic 6 * TCM backends. 7 * 8 * Copyright (c) 2011-2013 Datera, Inc. All rights reserved. 9 * 10 * Author: 11 * Nicholas A. Bellinger <nab@daterainc.com> 12 * 13 ******************************************************************************/ 14 15 #include <linux/slab.h> 16 #include <linux/spinlock.h> 17 #include <linux/list.h> 18 #include <linux/configfs.h> 19 #include <linux/ratelimit.h> 20 #include <scsi/scsi_proto.h> 21 #include <asm/unaligned.h> 22 23 #include <target/target_core_base.h> 24 #include <target/target_core_backend.h> 25 #include <target/target_core_fabric.h> 26 27 #include "target_core_internal.h" 28 #include "target_core_pr.h" 29 #include "target_core_ua.h" 30 #include "target_core_xcopy.h" 31 32 static struct workqueue_struct *xcopy_wq = NULL; 33 34 static sense_reason_t target_parse_xcopy_cmd(struct xcopy_op *xop); 35 36 /** 37 * target_xcopy_locate_se_dev_e4_iter - compare XCOPY NAA device identifiers 38 * 39 * @se_dev: device being considered for match 40 * @dev_wwn: XCOPY requested NAA dev_wwn 41 * @return: 1 on match, 0 on no-match 42 */ 43 static int target_xcopy_locate_se_dev_e4_iter(struct se_device *se_dev, 44 const unsigned char *dev_wwn) 45 { 46 unsigned char tmp_dev_wwn[XCOPY_NAA_IEEE_REGEX_LEN]; 47 int rc; 48 49 if (!se_dev->dev_attrib.emulate_3pc) { 50 pr_debug("XCOPY: emulate_3pc disabled on se_dev %p\n", se_dev); 51 return 0; 52 } 53 54 memset(&tmp_dev_wwn[0], 0, XCOPY_NAA_IEEE_REGEX_LEN); 55 spc_gen_naa_6h_vendor_specific(se_dev, &tmp_dev_wwn[0]); 56 57 rc = memcmp(&tmp_dev_wwn[0], dev_wwn, XCOPY_NAA_IEEE_REGEX_LEN); 58 if (rc != 0) { 59 pr_debug("XCOPY: skip non-matching: %*ph\n", 60 XCOPY_NAA_IEEE_REGEX_LEN, tmp_dev_wwn); 61 return 0; 62 } 63 pr_debug("XCOPY 0xe4: located se_dev: %p\n", se_dev); 64 65 return 1; 66 } 67 68 static int target_xcopy_locate_se_dev_e4(struct se_session *sess, 69 const unsigned char *dev_wwn, 70 struct se_device **_found_dev, 71 struct percpu_ref **_found_lun_ref) 72 { 73 struct se_dev_entry *deve; 74 struct se_node_acl *nacl; 75 struct se_lun *this_lun = NULL; 76 struct se_device *found_dev = NULL; 77 78 /* cmd with NULL sess indicates no associated $FABRIC_MOD */ 79 if (!sess) 80 goto err_out; 81 82 pr_debug("XCOPY 0xe4: searching for: %*ph\n", 83 XCOPY_NAA_IEEE_REGEX_LEN, dev_wwn); 84 85 nacl = sess->se_node_acl; 86 rcu_read_lock(); 87 hlist_for_each_entry_rcu(deve, &nacl->lun_entry_hlist, link) { 88 struct se_device *this_dev; 89 int rc; 90 91 this_lun = rcu_dereference(deve->se_lun); 92 this_dev = rcu_dereference_raw(this_lun->lun_se_dev); 93 94 rc = target_xcopy_locate_se_dev_e4_iter(this_dev, dev_wwn); 95 if (rc) { 96 if (percpu_ref_tryget_live(&this_lun->lun_ref)) 97 found_dev = this_dev; 98 break; 99 } 100 } 101 rcu_read_unlock(); 102 if (found_dev == NULL) 103 goto err_out; 104 105 pr_debug("lun_ref held for se_dev: %p se_dev->se_dev_group: %p\n", 106 found_dev, &found_dev->dev_group); 107 *_found_dev = found_dev; 108 *_found_lun_ref = &this_lun->lun_ref; 109 return 0; 110 err_out: 111 pr_debug_ratelimited("Unable to locate 0xe4 descriptor for EXTENDED_COPY\n"); 112 return -EINVAL; 113 } 114 115 static int target_xcopy_parse_tiddesc_e4(struct se_cmd *se_cmd, struct xcopy_op *xop, 116 unsigned char *p, unsigned short cscd_index) 117 { 118 unsigned char *desc = p; 119 unsigned short ript; 120 u8 desig_len; 121 /* 122 * Extract RELATIVE INITIATOR PORT IDENTIFIER 123 */ 124 ript = get_unaligned_be16(&desc[2]); 125 pr_debug("XCOPY 0xe4: RELATIVE INITIATOR PORT IDENTIFIER: %hu\n", ript); 126 /* 127 * Check for supported code set, association, and designator type 128 */ 129 if ((desc[4] & 0x0f) != 0x1) { 130 pr_err("XCOPY 0xe4: code set of non binary type not supported\n"); 131 return -EINVAL; 132 } 133 if ((desc[5] & 0x30) != 0x00) { 134 pr_err("XCOPY 0xe4: association other than LUN not supported\n"); 135 return -EINVAL; 136 } 137 if ((desc[5] & 0x0f) != 0x3) { 138 pr_err("XCOPY 0xe4: designator type unsupported: 0x%02x\n", 139 (desc[5] & 0x0f)); 140 return -EINVAL; 141 } 142 /* 143 * Check for matching 16 byte length for NAA IEEE Registered Extended 144 * Assigned designator 145 */ 146 desig_len = desc[7]; 147 if (desig_len != XCOPY_NAA_IEEE_REGEX_LEN) { 148 pr_err("XCOPY 0xe4: invalid desig_len: %d\n", (int)desig_len); 149 return -EINVAL; 150 } 151 pr_debug("XCOPY 0xe4: desig_len: %d\n", (int)desig_len); 152 /* 153 * Check for NAA IEEE Registered Extended Assigned header.. 154 */ 155 if ((desc[8] & 0xf0) != 0x60) { 156 pr_err("XCOPY 0xe4: Unsupported DESIGNATOR TYPE: 0x%02x\n", 157 (desc[8] & 0xf0)); 158 return -EINVAL; 159 } 160 161 if (cscd_index != xop->stdi && cscd_index != xop->dtdi) { 162 pr_debug("XCOPY 0xe4: ignoring CSCD entry %d - neither src nor " 163 "dest\n", cscd_index); 164 return 0; 165 } 166 167 if (cscd_index == xop->stdi) { 168 memcpy(&xop->src_tid_wwn[0], &desc[8], XCOPY_NAA_IEEE_REGEX_LEN); 169 /* 170 * Determine if the source designator matches the local device 171 */ 172 if (!memcmp(&xop->local_dev_wwn[0], &xop->src_tid_wwn[0], 173 XCOPY_NAA_IEEE_REGEX_LEN)) { 174 xop->op_origin = XCOL_SOURCE_RECV_OP; 175 xop->src_dev = se_cmd->se_dev; 176 pr_debug("XCOPY 0xe4: Set xop->src_dev %p from source" 177 " received xop\n", xop->src_dev); 178 } 179 } 180 181 if (cscd_index == xop->dtdi) { 182 memcpy(&xop->dst_tid_wwn[0], &desc[8], XCOPY_NAA_IEEE_REGEX_LEN); 183 /* 184 * Determine if the destination designator matches the local 185 * device. If @cscd_index corresponds to both source (stdi) and 186 * destination (dtdi), or dtdi comes after stdi, then 187 * XCOL_DEST_RECV_OP wins. 188 */ 189 if (!memcmp(&xop->local_dev_wwn[0], &xop->dst_tid_wwn[0], 190 XCOPY_NAA_IEEE_REGEX_LEN)) { 191 xop->op_origin = XCOL_DEST_RECV_OP; 192 xop->dst_dev = se_cmd->se_dev; 193 pr_debug("XCOPY 0xe4: Set xop->dst_dev: %p from destination" 194 " received xop\n", xop->dst_dev); 195 } 196 } 197 198 return 0; 199 } 200 201 static int target_xcopy_parse_target_descriptors(struct se_cmd *se_cmd, 202 struct xcopy_op *xop, unsigned char *p, 203 unsigned short tdll, sense_reason_t *sense_ret) 204 { 205 struct se_device *local_dev = se_cmd->se_dev; 206 unsigned char *desc = p; 207 int offset = tdll % XCOPY_TARGET_DESC_LEN, rc; 208 unsigned short cscd_index = 0; 209 unsigned short start = 0; 210 211 *sense_ret = TCM_INVALID_PARAMETER_LIST; 212 213 if (offset != 0) { 214 pr_err("XCOPY target descriptor list length is not" 215 " multiple of %d\n", XCOPY_TARGET_DESC_LEN); 216 *sense_ret = TCM_UNSUPPORTED_TARGET_DESC_TYPE_CODE; 217 return -EINVAL; 218 } 219 if (tdll > RCR_OP_MAX_TARGET_DESC_COUNT * XCOPY_TARGET_DESC_LEN) { 220 pr_err("XCOPY target descriptor supports a maximum" 221 " two src/dest descriptors, tdll: %hu too large..\n", tdll); 222 /* spc4r37 6.4.3.4 CSCD DESCRIPTOR LIST LENGTH field */ 223 *sense_ret = TCM_TOO_MANY_TARGET_DESCS; 224 return -EINVAL; 225 } 226 /* 227 * Generate an IEEE Registered Extended designator based upon the 228 * se_device the XCOPY was received upon.. 229 */ 230 memset(&xop->local_dev_wwn[0], 0, XCOPY_NAA_IEEE_REGEX_LEN); 231 spc_gen_naa_6h_vendor_specific(local_dev, &xop->local_dev_wwn[0]); 232 233 while (start < tdll) { 234 /* 235 * Check target descriptor identification with 0xE4 type, and 236 * compare the current index with the CSCD descriptor IDs in 237 * the segment descriptor. Use VPD 0x83 WWPN matching .. 238 */ 239 switch (desc[0]) { 240 case 0xe4: 241 rc = target_xcopy_parse_tiddesc_e4(se_cmd, xop, 242 &desc[0], cscd_index); 243 if (rc != 0) 244 goto out; 245 start += XCOPY_TARGET_DESC_LEN; 246 desc += XCOPY_TARGET_DESC_LEN; 247 cscd_index++; 248 break; 249 default: 250 pr_err("XCOPY unsupported descriptor type code:" 251 " 0x%02x\n", desc[0]); 252 *sense_ret = TCM_UNSUPPORTED_TARGET_DESC_TYPE_CODE; 253 goto out; 254 } 255 } 256 257 switch (xop->op_origin) { 258 case XCOL_SOURCE_RECV_OP: 259 rc = target_xcopy_locate_se_dev_e4(se_cmd->se_sess, 260 xop->dst_tid_wwn, 261 &xop->dst_dev, 262 &xop->remote_lun_ref); 263 break; 264 case XCOL_DEST_RECV_OP: 265 rc = target_xcopy_locate_se_dev_e4(se_cmd->se_sess, 266 xop->src_tid_wwn, 267 &xop->src_dev, 268 &xop->remote_lun_ref); 269 break; 270 default: 271 pr_err("XCOPY CSCD descriptor IDs not found in CSCD list - " 272 "stdi: %hu dtdi: %hu\n", xop->stdi, xop->dtdi); 273 rc = -EINVAL; 274 break; 275 } 276 /* 277 * If a matching IEEE NAA 0x83 descriptor for the requested device 278 * is not located on this node, return COPY_ABORTED with ASQ/ASQC 279 * 0x0d/0x02 - COPY_TARGET_DEVICE_NOT_REACHABLE to request the 280 * initiator to fall back to normal copy method. 281 */ 282 if (rc < 0) { 283 *sense_ret = TCM_COPY_TARGET_DEVICE_NOT_REACHABLE; 284 goto out; 285 } 286 287 pr_debug("XCOPY TGT desc: Source dev: %p NAA IEEE WWN: 0x%16phN\n", 288 xop->src_dev, &xop->src_tid_wwn[0]); 289 pr_debug("XCOPY TGT desc: Dest dev: %p NAA IEEE WWN: 0x%16phN\n", 290 xop->dst_dev, &xop->dst_tid_wwn[0]); 291 292 return cscd_index; 293 294 out: 295 return -EINVAL; 296 } 297 298 static int target_xcopy_parse_segdesc_02(struct se_cmd *se_cmd, struct xcopy_op *xop, 299 unsigned char *p) 300 { 301 unsigned char *desc = p; 302 int dc = (desc[1] & 0x02); 303 unsigned short desc_len; 304 305 desc_len = get_unaligned_be16(&desc[2]); 306 if (desc_len != 0x18) { 307 pr_err("XCOPY segment desc 0x02: Illegal desc_len:" 308 " %hu\n", desc_len); 309 return -EINVAL; 310 } 311 312 xop->stdi = get_unaligned_be16(&desc[4]); 313 xop->dtdi = get_unaligned_be16(&desc[6]); 314 315 if (xop->stdi > XCOPY_CSCD_DESC_ID_LIST_OFF_MAX || 316 xop->dtdi > XCOPY_CSCD_DESC_ID_LIST_OFF_MAX) { 317 pr_err("XCOPY segment desc 0x02: unsupported CSCD ID > 0x%x; stdi: %hu dtdi: %hu\n", 318 XCOPY_CSCD_DESC_ID_LIST_OFF_MAX, xop->stdi, xop->dtdi); 319 return -EINVAL; 320 } 321 322 pr_debug("XCOPY seg desc 0x02: desc_len: %hu stdi: %hu dtdi: %hu, DC: %d\n", 323 desc_len, xop->stdi, xop->dtdi, dc); 324 325 xop->nolb = get_unaligned_be16(&desc[10]); 326 xop->src_lba = get_unaligned_be64(&desc[12]); 327 xop->dst_lba = get_unaligned_be64(&desc[20]); 328 pr_debug("XCOPY seg desc 0x02: nolb: %hu src_lba: %llu dst_lba: %llu\n", 329 xop->nolb, (unsigned long long)xop->src_lba, 330 (unsigned long long)xop->dst_lba); 331 332 return 0; 333 } 334 335 static int target_xcopy_parse_segment_descriptors(struct se_cmd *se_cmd, 336 struct xcopy_op *xop, unsigned char *p, 337 unsigned int sdll, sense_reason_t *sense_ret) 338 { 339 unsigned char *desc = p; 340 unsigned int start = 0; 341 int offset = sdll % XCOPY_SEGMENT_DESC_LEN, rc, ret = 0; 342 343 *sense_ret = TCM_INVALID_PARAMETER_LIST; 344 345 if (offset != 0) { 346 pr_err("XCOPY segment descriptor list length is not" 347 " multiple of %d\n", XCOPY_SEGMENT_DESC_LEN); 348 *sense_ret = TCM_UNSUPPORTED_SEGMENT_DESC_TYPE_CODE; 349 return -EINVAL; 350 } 351 if (sdll > RCR_OP_MAX_SG_DESC_COUNT * XCOPY_SEGMENT_DESC_LEN) { 352 pr_err("XCOPY supports %u segment descriptor(s), sdll: %u too" 353 " large..\n", RCR_OP_MAX_SG_DESC_COUNT, sdll); 354 /* spc4r37 6.4.3.5 SEGMENT DESCRIPTOR LIST LENGTH field */ 355 *sense_ret = TCM_TOO_MANY_SEGMENT_DESCS; 356 return -EINVAL; 357 } 358 359 while (start < sdll) { 360 /* 361 * Check segment descriptor type code for block -> block 362 */ 363 switch (desc[0]) { 364 case 0x02: 365 rc = target_xcopy_parse_segdesc_02(se_cmd, xop, desc); 366 if (rc < 0) 367 goto out; 368 369 ret++; 370 start += XCOPY_SEGMENT_DESC_LEN; 371 desc += XCOPY_SEGMENT_DESC_LEN; 372 break; 373 default: 374 pr_err("XCOPY unsupported segment descriptor" 375 "type: 0x%02x\n", desc[0]); 376 *sense_ret = TCM_UNSUPPORTED_SEGMENT_DESC_TYPE_CODE; 377 goto out; 378 } 379 } 380 381 return ret; 382 383 out: 384 return -EINVAL; 385 } 386 387 /* 388 * Start xcopy_pt ops 389 */ 390 391 struct xcopy_pt_cmd { 392 struct se_cmd se_cmd; 393 struct completion xpt_passthrough_sem; 394 unsigned char sense_buffer[TRANSPORT_SENSE_BUFFER]; 395 }; 396 397 struct se_portal_group xcopy_pt_tpg; 398 static struct se_session xcopy_pt_sess; 399 static struct se_node_acl xcopy_pt_nacl; 400 401 static int xcopy_pt_get_cmd_state(struct se_cmd *se_cmd) 402 { 403 return 0; 404 } 405 406 static void xcopy_pt_undepend_remotedev(struct xcopy_op *xop) 407 { 408 if (xop->op_origin == XCOL_SOURCE_RECV_OP) 409 pr_debug("putting dst lun_ref for %p\n", xop->dst_dev); 410 else 411 pr_debug("putting src lun_ref for %p\n", xop->src_dev); 412 413 percpu_ref_put(xop->remote_lun_ref); 414 } 415 416 static void xcopy_pt_release_cmd(struct se_cmd *se_cmd) 417 { 418 struct xcopy_pt_cmd *xpt_cmd = container_of(se_cmd, 419 struct xcopy_pt_cmd, se_cmd); 420 421 /* xpt_cmd is on the stack, nothing to free here */ 422 pr_debug("xpt_cmd done: %p\n", xpt_cmd); 423 } 424 425 static int xcopy_pt_check_stop_free(struct se_cmd *se_cmd) 426 { 427 struct xcopy_pt_cmd *xpt_cmd = container_of(se_cmd, 428 struct xcopy_pt_cmd, se_cmd); 429 430 complete(&xpt_cmd->xpt_passthrough_sem); 431 return 0; 432 } 433 434 static int xcopy_pt_write_pending(struct se_cmd *se_cmd) 435 { 436 return 0; 437 } 438 439 static int xcopy_pt_queue_data_in(struct se_cmd *se_cmd) 440 { 441 return 0; 442 } 443 444 static int xcopy_pt_queue_status(struct se_cmd *se_cmd) 445 { 446 return 0; 447 } 448 449 static const struct target_core_fabric_ops xcopy_pt_tfo = { 450 .fabric_name = "xcopy-pt", 451 .get_cmd_state = xcopy_pt_get_cmd_state, 452 .release_cmd = xcopy_pt_release_cmd, 453 .check_stop_free = xcopy_pt_check_stop_free, 454 .write_pending = xcopy_pt_write_pending, 455 .queue_data_in = xcopy_pt_queue_data_in, 456 .queue_status = xcopy_pt_queue_status, 457 }; 458 459 /* 460 * End xcopy_pt_ops 461 */ 462 463 int target_xcopy_setup_pt(void) 464 { 465 int ret; 466 467 xcopy_wq = alloc_workqueue("xcopy_wq", WQ_MEM_RECLAIM, 0); 468 if (!xcopy_wq) { 469 pr_err("Unable to allocate xcopy_wq\n"); 470 return -ENOMEM; 471 } 472 473 memset(&xcopy_pt_tpg, 0, sizeof(struct se_portal_group)); 474 INIT_LIST_HEAD(&xcopy_pt_tpg.acl_node_list); 475 INIT_LIST_HEAD(&xcopy_pt_tpg.tpg_sess_list); 476 477 xcopy_pt_tpg.se_tpg_tfo = &xcopy_pt_tfo; 478 479 memset(&xcopy_pt_nacl, 0, sizeof(struct se_node_acl)); 480 INIT_LIST_HEAD(&xcopy_pt_nacl.acl_list); 481 INIT_LIST_HEAD(&xcopy_pt_nacl.acl_sess_list); 482 memset(&xcopy_pt_sess, 0, sizeof(struct se_session)); 483 ret = transport_init_session(&xcopy_pt_sess); 484 if (ret < 0) 485 goto destroy_wq; 486 487 xcopy_pt_nacl.se_tpg = &xcopy_pt_tpg; 488 xcopy_pt_nacl.nacl_sess = &xcopy_pt_sess; 489 490 xcopy_pt_sess.se_tpg = &xcopy_pt_tpg; 491 xcopy_pt_sess.se_node_acl = &xcopy_pt_nacl; 492 493 return 0; 494 495 destroy_wq: 496 destroy_workqueue(xcopy_wq); 497 xcopy_wq = NULL; 498 return ret; 499 } 500 501 void target_xcopy_release_pt(void) 502 { 503 if (xcopy_wq) { 504 destroy_workqueue(xcopy_wq); 505 transport_uninit_session(&xcopy_pt_sess); 506 } 507 } 508 509 /* 510 * target_xcopy_setup_pt_cmd - set up a pass-through command 511 * @xpt_cmd: Data structure to initialize. 512 * @xop: Describes the XCOPY operation received from an initiator. 513 * @se_dev: Backend device to associate with @xpt_cmd if 514 * @remote_port == true. 515 * @cdb: SCSI CDB to be copied into @xpt_cmd. 516 * @remote_port: If false, use the LUN through which the XCOPY command has 517 * been received. If true, use @se_dev->xcopy_lun. 518 * 519 * Set up a SCSI command (READ or WRITE) that will be used to execute an 520 * XCOPY command. 521 */ 522 static int target_xcopy_setup_pt_cmd( 523 struct xcopy_pt_cmd *xpt_cmd, 524 struct xcopy_op *xop, 525 struct se_device *se_dev, 526 unsigned char *cdb, 527 bool remote_port) 528 { 529 struct se_cmd *cmd = &xpt_cmd->se_cmd; 530 531 /* 532 * Setup LUN+port to honor reservations based upon xop->op_origin for 533 * X-COPY PUSH or X-COPY PULL based upon where the CDB was received. 534 */ 535 if (remote_port) { 536 cmd->se_lun = &se_dev->xcopy_lun; 537 cmd->se_dev = se_dev; 538 } else { 539 cmd->se_lun = xop->xop_se_cmd->se_lun; 540 cmd->se_dev = xop->xop_se_cmd->se_dev; 541 } 542 cmd->se_cmd_flags |= SCF_SE_LUN_CMD; 543 544 if (target_cmd_init_cdb(cmd, cdb, GFP_KERNEL)) 545 return -EINVAL; 546 547 cmd->tag = 0; 548 if (target_cmd_parse_cdb(cmd)) 549 return -EINVAL; 550 551 if (transport_generic_map_mem_to_cmd(cmd, xop->xop_data_sg, 552 xop->xop_data_nents, NULL, 0)) 553 return -EINVAL; 554 555 pr_debug("Setup PASSTHROUGH_NOALLOC t_data_sg: %p t_data_nents:" 556 " %u\n", cmd->t_data_sg, cmd->t_data_nents); 557 558 return 0; 559 } 560 561 static int target_xcopy_issue_pt_cmd(struct xcopy_pt_cmd *xpt_cmd) 562 { 563 struct se_cmd *se_cmd = &xpt_cmd->se_cmd; 564 sense_reason_t sense_rc; 565 566 sense_rc = transport_generic_new_cmd(se_cmd); 567 if (sense_rc) 568 return -EINVAL; 569 570 if (se_cmd->data_direction == DMA_TO_DEVICE) 571 target_execute_cmd(se_cmd); 572 573 wait_for_completion_interruptible(&xpt_cmd->xpt_passthrough_sem); 574 575 pr_debug("target_xcopy_issue_pt_cmd(): SCSI status: 0x%02x\n", 576 se_cmd->scsi_status); 577 578 return (se_cmd->scsi_status) ? -EINVAL : 0; 579 } 580 581 static int target_xcopy_read_source( 582 struct se_cmd *ec_cmd, 583 struct xcopy_op *xop, 584 struct se_device *src_dev, 585 sector_t src_lba, 586 u32 src_sectors) 587 { 588 struct xcopy_pt_cmd xpt_cmd; 589 struct se_cmd *se_cmd = &xpt_cmd.se_cmd; 590 u32 length = (src_sectors * src_dev->dev_attrib.block_size); 591 int rc; 592 unsigned char cdb[16]; 593 bool remote_port = (xop->op_origin == XCOL_DEST_RECV_OP); 594 595 memset(&xpt_cmd, 0, sizeof(xpt_cmd)); 596 init_completion(&xpt_cmd.xpt_passthrough_sem); 597 598 memset(&cdb[0], 0, 16); 599 cdb[0] = READ_16; 600 put_unaligned_be64(src_lba, &cdb[2]); 601 put_unaligned_be32(src_sectors, &cdb[10]); 602 pr_debug("XCOPY: Built READ_16: LBA: %llu Sectors: %u Length: %u\n", 603 (unsigned long long)src_lba, src_sectors, length); 604 605 __target_init_cmd(se_cmd, &xcopy_pt_tfo, &xcopy_pt_sess, length, 606 DMA_FROM_DEVICE, 0, &xpt_cmd.sense_buffer[0], 0); 607 608 rc = target_xcopy_setup_pt_cmd(&xpt_cmd, xop, src_dev, &cdb[0], 609 remote_port); 610 if (rc < 0) { 611 ec_cmd->scsi_status = se_cmd->scsi_status; 612 goto out; 613 } 614 615 pr_debug("XCOPY-READ: Saved xop->xop_data_sg: %p, num: %u for READ" 616 " memory\n", xop->xop_data_sg, xop->xop_data_nents); 617 618 rc = target_xcopy_issue_pt_cmd(&xpt_cmd); 619 if (rc < 0) 620 ec_cmd->scsi_status = se_cmd->scsi_status; 621 out: 622 transport_generic_free_cmd(se_cmd, 0); 623 return rc; 624 } 625 626 static int target_xcopy_write_destination( 627 struct se_cmd *ec_cmd, 628 struct xcopy_op *xop, 629 struct se_device *dst_dev, 630 sector_t dst_lba, 631 u32 dst_sectors) 632 { 633 struct xcopy_pt_cmd xpt_cmd; 634 struct se_cmd *se_cmd = &xpt_cmd.se_cmd; 635 u32 length = (dst_sectors * dst_dev->dev_attrib.block_size); 636 int rc; 637 unsigned char cdb[16]; 638 bool remote_port = (xop->op_origin == XCOL_SOURCE_RECV_OP); 639 640 memset(&xpt_cmd, 0, sizeof(xpt_cmd)); 641 init_completion(&xpt_cmd.xpt_passthrough_sem); 642 643 memset(&cdb[0], 0, 16); 644 cdb[0] = WRITE_16; 645 put_unaligned_be64(dst_lba, &cdb[2]); 646 put_unaligned_be32(dst_sectors, &cdb[10]); 647 pr_debug("XCOPY: Built WRITE_16: LBA: %llu Sectors: %u Length: %u\n", 648 (unsigned long long)dst_lba, dst_sectors, length); 649 650 __target_init_cmd(se_cmd, &xcopy_pt_tfo, &xcopy_pt_sess, length, 651 DMA_TO_DEVICE, 0, &xpt_cmd.sense_buffer[0], 0); 652 653 rc = target_xcopy_setup_pt_cmd(&xpt_cmd, xop, dst_dev, &cdb[0], 654 remote_port); 655 if (rc < 0) { 656 ec_cmd->scsi_status = se_cmd->scsi_status; 657 goto out; 658 } 659 660 rc = target_xcopy_issue_pt_cmd(&xpt_cmd); 661 if (rc < 0) 662 ec_cmd->scsi_status = se_cmd->scsi_status; 663 out: 664 transport_generic_free_cmd(se_cmd, 0); 665 return rc; 666 } 667 668 static void target_xcopy_do_work(struct work_struct *work) 669 { 670 struct xcopy_op *xop = container_of(work, struct xcopy_op, xop_work); 671 struct se_cmd *ec_cmd = xop->xop_se_cmd; 672 struct se_device *src_dev, *dst_dev; 673 sector_t src_lba, dst_lba, end_lba; 674 unsigned int max_sectors; 675 int rc = 0; 676 unsigned short nolb, max_nolb, copied_nolb = 0; 677 sense_reason_t sense_rc; 678 679 sense_rc = target_parse_xcopy_cmd(xop); 680 if (sense_rc != TCM_NO_SENSE) 681 goto err_free; 682 683 if (WARN_ON_ONCE(!xop->src_dev) || WARN_ON_ONCE(!xop->dst_dev)) { 684 sense_rc = TCM_INVALID_PARAMETER_LIST; 685 goto err_free; 686 } 687 688 src_dev = xop->src_dev; 689 dst_dev = xop->dst_dev; 690 src_lba = xop->src_lba; 691 dst_lba = xop->dst_lba; 692 nolb = xop->nolb; 693 end_lba = src_lba + nolb; 694 /* 695 * Break up XCOPY I/O into hw_max_sectors sized I/O based on the 696 * smallest max_sectors between src_dev + dev_dev, or 697 */ 698 max_sectors = min(src_dev->dev_attrib.hw_max_sectors, 699 dst_dev->dev_attrib.hw_max_sectors); 700 max_sectors = min_t(u32, max_sectors, XCOPY_MAX_SECTORS); 701 702 max_nolb = min_t(u16, max_sectors, ((u16)(~0U))); 703 704 pr_debug("target_xcopy_do_work: nolb: %hu, max_nolb: %hu end_lba: %llu\n", 705 nolb, max_nolb, (unsigned long long)end_lba); 706 pr_debug("target_xcopy_do_work: Starting src_lba: %llu, dst_lba: %llu\n", 707 (unsigned long long)src_lba, (unsigned long long)dst_lba); 708 709 while (src_lba < end_lba) { 710 unsigned short cur_nolb = min(nolb, max_nolb); 711 u32 cur_bytes = cur_nolb * src_dev->dev_attrib.block_size; 712 713 if (cur_bytes != xop->xop_data_bytes) { 714 /* 715 * (Re)allocate a buffer large enough to hold the XCOPY 716 * I/O size, which can be reused each read / write loop. 717 */ 718 target_free_sgl(xop->xop_data_sg, xop->xop_data_nents); 719 rc = target_alloc_sgl(&xop->xop_data_sg, 720 &xop->xop_data_nents, 721 cur_bytes, 722 false, false); 723 if (rc < 0) 724 goto out; 725 xop->xop_data_bytes = cur_bytes; 726 } 727 728 pr_debug("target_xcopy_do_work: Calling read src_dev: %p src_lba: %llu," 729 " cur_nolb: %hu\n", src_dev, (unsigned long long)src_lba, cur_nolb); 730 731 rc = target_xcopy_read_source(ec_cmd, xop, src_dev, src_lba, cur_nolb); 732 if (rc < 0) 733 goto out; 734 735 src_lba += cur_nolb; 736 pr_debug("target_xcopy_do_work: Incremented READ src_lba to %llu\n", 737 (unsigned long long)src_lba); 738 739 pr_debug("target_xcopy_do_work: Calling write dst_dev: %p dst_lba: %llu," 740 " cur_nolb: %hu\n", dst_dev, (unsigned long long)dst_lba, cur_nolb); 741 742 rc = target_xcopy_write_destination(ec_cmd, xop, dst_dev, 743 dst_lba, cur_nolb); 744 if (rc < 0) 745 goto out; 746 747 dst_lba += cur_nolb; 748 pr_debug("target_xcopy_do_work: Incremented WRITE dst_lba to %llu\n", 749 (unsigned long long)dst_lba); 750 751 copied_nolb += cur_nolb; 752 nolb -= cur_nolb; 753 } 754 755 xcopy_pt_undepend_remotedev(xop); 756 target_free_sgl(xop->xop_data_sg, xop->xop_data_nents); 757 kfree(xop); 758 759 pr_debug("target_xcopy_do_work: Final src_lba: %llu, dst_lba: %llu\n", 760 (unsigned long long)src_lba, (unsigned long long)dst_lba); 761 pr_debug("target_xcopy_do_work: Blocks copied: %hu, Bytes Copied: %u\n", 762 copied_nolb, copied_nolb * dst_dev->dev_attrib.block_size); 763 764 pr_debug("target_xcopy_do_work: Setting X-COPY GOOD status -> sending response\n"); 765 target_complete_cmd(ec_cmd, SAM_STAT_GOOD); 766 return; 767 768 out: 769 /* 770 * The XCOPY command was aborted after some data was transferred. 771 * Terminate command with CHECK CONDITION status, with the sense key 772 * set to COPY ABORTED. 773 */ 774 sense_rc = TCM_COPY_TARGET_DEVICE_NOT_REACHABLE; 775 xcopy_pt_undepend_remotedev(xop); 776 target_free_sgl(xop->xop_data_sg, xop->xop_data_nents); 777 778 err_free: 779 kfree(xop); 780 pr_warn_ratelimited("target_xcopy_do_work: rc: %d, sense: %u, XCOPY operation failed\n", 781 rc, sense_rc); 782 target_complete_cmd_with_sense(ec_cmd, SAM_STAT_CHECK_CONDITION, sense_rc); 783 } 784 785 /* 786 * Returns TCM_NO_SENSE upon success or a sense code != TCM_NO_SENSE if parsing 787 * fails. 788 */ 789 static sense_reason_t target_parse_xcopy_cmd(struct xcopy_op *xop) 790 { 791 struct se_cmd *se_cmd = xop->xop_se_cmd; 792 unsigned char *p = NULL, *seg_desc; 793 unsigned int list_id, list_id_usage, sdll, inline_dl; 794 sense_reason_t ret = TCM_INVALID_PARAMETER_LIST; 795 int rc; 796 unsigned short tdll; 797 798 p = transport_kmap_data_sg(se_cmd); 799 if (!p) { 800 pr_err("transport_kmap_data_sg() failed in target_do_xcopy\n"); 801 return TCM_OUT_OF_RESOURCES; 802 } 803 804 list_id = p[0]; 805 list_id_usage = (p[1] & 0x18) >> 3; 806 807 /* 808 * Determine TARGET DESCRIPTOR LIST LENGTH + SEGMENT DESCRIPTOR LIST LENGTH 809 */ 810 tdll = get_unaligned_be16(&p[2]); 811 sdll = get_unaligned_be32(&p[8]); 812 if (tdll + sdll > RCR_OP_MAX_DESC_LIST_LEN) { 813 pr_err("XCOPY descriptor list length %u exceeds maximum %u\n", 814 tdll + sdll, RCR_OP_MAX_DESC_LIST_LEN); 815 ret = TCM_PARAMETER_LIST_LENGTH_ERROR; 816 goto out; 817 } 818 819 inline_dl = get_unaligned_be32(&p[12]); 820 if (inline_dl != 0) { 821 pr_err("XCOPY with non zero inline data length\n"); 822 goto out; 823 } 824 825 if (se_cmd->data_length < (XCOPY_HDR_LEN + tdll + sdll + inline_dl)) { 826 pr_err("XCOPY parameter truncation: data length %u too small " 827 "for tdll: %hu sdll: %u inline_dl: %u\n", 828 se_cmd->data_length, tdll, sdll, inline_dl); 829 ret = TCM_PARAMETER_LIST_LENGTH_ERROR; 830 goto out; 831 } 832 833 pr_debug("Processing XCOPY with list_id: 0x%02x list_id_usage: 0x%02x" 834 " tdll: %hu sdll: %u inline_dl: %u\n", list_id, list_id_usage, 835 tdll, sdll, inline_dl); 836 837 /* 838 * skip over the target descriptors until segment descriptors 839 * have been passed - CSCD ids are needed to determine src and dest. 840 */ 841 seg_desc = &p[16] + tdll; 842 843 rc = target_xcopy_parse_segment_descriptors(se_cmd, xop, seg_desc, 844 sdll, &ret); 845 if (rc <= 0) 846 goto out; 847 848 pr_debug("XCOPY: Processed %d segment descriptors, length: %u\n", rc, 849 rc * XCOPY_SEGMENT_DESC_LEN); 850 851 rc = target_xcopy_parse_target_descriptors(se_cmd, xop, &p[16], tdll, &ret); 852 if (rc <= 0) 853 goto out; 854 855 if (xop->src_dev->dev_attrib.block_size != 856 xop->dst_dev->dev_attrib.block_size) { 857 pr_err("XCOPY: Non matching src_dev block_size: %u + dst_dev" 858 " block_size: %u currently unsupported\n", 859 xop->src_dev->dev_attrib.block_size, 860 xop->dst_dev->dev_attrib.block_size); 861 xcopy_pt_undepend_remotedev(xop); 862 ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; 863 goto out; 864 } 865 866 pr_debug("XCOPY: Processed %d target descriptors, length: %u\n", rc, 867 rc * XCOPY_TARGET_DESC_LEN); 868 transport_kunmap_data_sg(se_cmd); 869 return TCM_NO_SENSE; 870 871 out: 872 if (p) 873 transport_kunmap_data_sg(se_cmd); 874 return ret; 875 } 876 877 sense_reason_t target_do_xcopy(struct se_cmd *se_cmd) 878 { 879 struct se_device *dev = se_cmd->se_dev; 880 struct xcopy_op *xop; 881 unsigned int sa; 882 883 if (!dev->dev_attrib.emulate_3pc) { 884 pr_err("EXTENDED_COPY operation explicitly disabled\n"); 885 return TCM_UNSUPPORTED_SCSI_OPCODE; 886 } 887 888 sa = se_cmd->t_task_cdb[1] & 0x1f; 889 if (sa != 0x00) { 890 pr_err("EXTENDED_COPY(LID4) not supported\n"); 891 return TCM_UNSUPPORTED_SCSI_OPCODE; 892 } 893 894 if (se_cmd->data_length == 0) { 895 target_complete_cmd(se_cmd, SAM_STAT_GOOD); 896 return TCM_NO_SENSE; 897 } 898 if (se_cmd->data_length < XCOPY_HDR_LEN) { 899 pr_err("XCOPY parameter truncation: length %u < hdr_len %u\n", 900 se_cmd->data_length, XCOPY_HDR_LEN); 901 return TCM_PARAMETER_LIST_LENGTH_ERROR; 902 } 903 904 xop = kzalloc(sizeof(struct xcopy_op), GFP_KERNEL); 905 if (!xop) 906 goto err; 907 xop->xop_se_cmd = se_cmd; 908 INIT_WORK(&xop->xop_work, target_xcopy_do_work); 909 if (WARN_ON_ONCE(!queue_work(xcopy_wq, &xop->xop_work))) 910 goto free; 911 return TCM_NO_SENSE; 912 913 free: 914 kfree(xop); 915 916 err: 917 return TCM_OUT_OF_RESOURCES; 918 } 919 920 static sense_reason_t target_rcr_operating_parameters(struct se_cmd *se_cmd) 921 { 922 unsigned char *p; 923 924 p = transport_kmap_data_sg(se_cmd); 925 if (!p) { 926 pr_err("transport_kmap_data_sg failed in" 927 " target_rcr_operating_parameters\n"); 928 return TCM_OUT_OF_RESOURCES; 929 } 930 931 if (se_cmd->data_length < 54) { 932 pr_err("Receive Copy Results Op Parameters length" 933 " too small: %u\n", se_cmd->data_length); 934 transport_kunmap_data_sg(se_cmd); 935 return TCM_INVALID_CDB_FIELD; 936 } 937 /* 938 * Set SNLID=1 (Supports no List ID) 939 */ 940 p[4] = 0x1; 941 /* 942 * MAXIMUM TARGET DESCRIPTOR COUNT 943 */ 944 put_unaligned_be16(RCR_OP_MAX_TARGET_DESC_COUNT, &p[8]); 945 /* 946 * MAXIMUM SEGMENT DESCRIPTOR COUNT 947 */ 948 put_unaligned_be16(RCR_OP_MAX_SG_DESC_COUNT, &p[10]); 949 /* 950 * MAXIMUM DESCRIPTOR LIST LENGTH 951 */ 952 put_unaligned_be32(RCR_OP_MAX_DESC_LIST_LEN, &p[12]); 953 /* 954 * MAXIMUM SEGMENT LENGTH 955 */ 956 put_unaligned_be32(RCR_OP_MAX_SEGMENT_LEN, &p[16]); 957 /* 958 * MAXIMUM INLINE DATA LENGTH for SA 0x04 (NOT SUPPORTED) 959 */ 960 put_unaligned_be32(0x0, &p[20]); 961 /* 962 * HELD DATA LIMIT 963 */ 964 put_unaligned_be32(0x0, &p[24]); 965 /* 966 * MAXIMUM STREAM DEVICE TRANSFER SIZE 967 */ 968 put_unaligned_be32(0x0, &p[28]); 969 /* 970 * TOTAL CONCURRENT COPIES 971 */ 972 put_unaligned_be16(RCR_OP_TOTAL_CONCURR_COPIES, &p[34]); 973 /* 974 * MAXIMUM CONCURRENT COPIES 975 */ 976 p[36] = RCR_OP_MAX_CONCURR_COPIES; 977 /* 978 * DATA SEGMENT GRANULARITY (log 2) 979 */ 980 p[37] = RCR_OP_DATA_SEG_GRAN_LOG2; 981 /* 982 * INLINE DATA GRANULARITY log 2) 983 */ 984 p[38] = RCR_OP_INLINE_DATA_GRAN_LOG2; 985 /* 986 * HELD DATA GRANULARITY 987 */ 988 p[39] = RCR_OP_HELD_DATA_GRAN_LOG2; 989 /* 990 * IMPLEMENTED DESCRIPTOR LIST LENGTH 991 */ 992 p[43] = 0x2; 993 /* 994 * List of implemented descriptor type codes (ordered) 995 */ 996 p[44] = 0x02; /* Copy Block to Block device */ 997 p[45] = 0xe4; /* Identification descriptor target descriptor */ 998 999 /* 1000 * AVAILABLE DATA (n-3) 1001 */ 1002 put_unaligned_be32(42, &p[0]); 1003 1004 transport_kunmap_data_sg(se_cmd); 1005 target_complete_cmd(se_cmd, SAM_STAT_GOOD); 1006 1007 return TCM_NO_SENSE; 1008 } 1009 1010 sense_reason_t target_do_receive_copy_results(struct se_cmd *se_cmd) 1011 { 1012 unsigned char *cdb = &se_cmd->t_task_cdb[0]; 1013 int sa = (cdb[1] & 0x1f), list_id = cdb[2]; 1014 sense_reason_t rc = TCM_NO_SENSE; 1015 1016 pr_debug("Entering target_do_receive_copy_results: SA: 0x%02x, List ID:" 1017 " 0x%02x, AL: %u\n", sa, list_id, se_cmd->data_length); 1018 1019 if (list_id != 0) { 1020 pr_err("Receive Copy Results with non zero list identifier" 1021 " not supported\n"); 1022 return TCM_INVALID_CDB_FIELD; 1023 } 1024 1025 switch (sa) { 1026 case RCR_SA_OPERATING_PARAMETERS: 1027 rc = target_rcr_operating_parameters(se_cmd); 1028 break; 1029 case RCR_SA_COPY_STATUS: 1030 case RCR_SA_RECEIVE_DATA: 1031 case RCR_SA_FAILED_SEGMENT_DETAILS: 1032 default: 1033 pr_err("Unsupported SA for receive copy results: 0x%02x\n", sa); 1034 return TCM_INVALID_CDB_FIELD; 1035 } 1036 1037 return rc; 1038 } 1039