1 // SPDX-License-Identifier: GPL-2.0 2 #include <linux/aperture.h> 3 #include <linux/kernel.h> 4 #include <linux/module.h> 5 #include <linux/errno.h> 6 #include <linux/string.h> 7 #include <linux/mm.h> 8 #include <linux/slab.h> 9 #include <linux/delay.h> 10 #include <linux/fb.h> 11 #include <linux/ioport.h> 12 #include <linux/init.h> 13 #include <linux/pci.h> 14 #include <linux/mm_types.h> 15 #include <linux/vmalloc.h> 16 #include <linux/pagemap.h> 17 #include <linux/screen_info.h> 18 #include <linux/console.h> 19 #include <asm/fb.h> 20 #include "sm750.h" 21 #include "sm750_accel.h" 22 #include "sm750_cursor.h" 23 24 /* 25 * #ifdef __BIG_ENDIAN 26 * ssize_t lynxfb_ops_write(struct fb_info *info, const char __user *buf, 27 * size_t count, loff_t *ppos); 28 * ssize_t lynxfb_ops_read(struct fb_info *info, char __user *buf, 29 * size_t count, loff_t *ppos); 30 * #endif 31 */ 32 33 /* common var for all device */ 34 static int g_hwcursor = 1; 35 static int g_noaccel; 36 static int g_nomtrr; 37 static const char *g_fbmode[] = {NULL, NULL}; 38 static const char *g_def_fbmode = "1024x768-32@60"; 39 static char *g_settings; 40 static int g_dualview; 41 static char *g_option; 42 43 static const struct fb_videomode lynx750_ext[] = { 44 /* 1024x600-60 VESA [1.71:1] */ 45 {NULL, 60, 1024, 600, 20423, 144, 40, 18, 1, 104, 3, 46 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 47 FB_VMODE_NONINTERLACED}, 48 49 /* 1024x600-70 VESA */ 50 {NULL, 70, 1024, 600, 17211, 152, 48, 21, 1, 104, 3, 51 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 52 FB_VMODE_NONINTERLACED}, 53 54 /* 1024x600-75 VESA */ 55 {NULL, 75, 1024, 600, 15822, 160, 56, 23, 1, 104, 3, 56 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 57 FB_VMODE_NONINTERLACED}, 58 59 /* 1024x600-85 VESA */ 60 {NULL, 85, 1024, 600, 13730, 168, 56, 26, 1, 112, 3, 61 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 62 FB_VMODE_NONINTERLACED}, 63 64 /* 720x480 */ 65 {NULL, 60, 720, 480, 37427, 88, 16, 13, 1, 72, 3, 66 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 67 FB_VMODE_NONINTERLACED}, 68 69 /* 1280x720 [1.78:1] */ 70 {NULL, 60, 1280, 720, 13426, 162, 86, 22, 1, 136, 3, 71 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 72 FB_VMODE_NONINTERLACED}, 73 74 /* 1280x768@60 */ 75 {NULL, 60, 1280, 768, 12579, 192, 64, 20, 3, 128, 7, 76 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 77 FB_VMODE_NONINTERLACED}, 78 79 /* 1360 x 768 [1.77083:1] */ 80 {NULL, 60, 1360, 768, 11804, 208, 64, 23, 1, 144, 3, 81 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 82 FB_VMODE_NONINTERLACED}, 83 84 /* 1368 x 768 [1.78:1] */ 85 {NULL, 60, 1368, 768, 11647, 216, 72, 23, 1, 144, 3, 86 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 87 FB_VMODE_NONINTERLACED}, 88 89 /* 1440 x 900 [16:10] */ 90 {NULL, 60, 1440, 900, 9392, 232, 80, 28, 1, 152, 3, 91 FB_SYNC_VERT_HIGH_ACT, 92 FB_VMODE_NONINTERLACED}, 93 94 /* 1440x960 [15:10] */ 95 {NULL, 60, 1440, 960, 8733, 240, 88, 30, 1, 152, 3, 96 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 97 FB_VMODE_NONINTERLACED}, 98 99 /* 1920x1080 [16:9] */ 100 {NULL, 60, 1920, 1080, 6734, 148, 88, 41, 1, 44, 3, 101 FB_SYNC_VERT_HIGH_ACT, 102 FB_VMODE_NONINTERLACED}, 103 }; 104 105 /* no hardware cursor supported under version 2.6.10, kernel bug */ 106 static int lynxfb_ops_cursor(struct fb_info *info, struct fb_cursor *fbcursor) 107 { 108 struct lynxfb_par *par; 109 struct lynxfb_crtc *crtc; 110 struct lynx_cursor *cursor; 111 112 par = info->par; 113 crtc = &par->crtc; 114 cursor = &crtc->cursor; 115 116 if (fbcursor->image.width > cursor->max_w || 117 fbcursor->image.height > cursor->max_h || 118 fbcursor->image.depth > 1) { 119 return -ENXIO; 120 } 121 122 sm750_hw_cursor_disable(cursor); 123 if (fbcursor->set & FB_CUR_SETSIZE) 124 sm750_hw_cursor_setSize(cursor, 125 fbcursor->image.width, 126 fbcursor->image.height); 127 128 if (fbcursor->set & FB_CUR_SETPOS) 129 sm750_hw_cursor_setPos(cursor, 130 fbcursor->image.dx - info->var.xoffset, 131 fbcursor->image.dy - info->var.yoffset); 132 133 if (fbcursor->set & FB_CUR_SETCMAP) { 134 /* get the 16bit color of kernel means */ 135 u16 fg, bg; 136 137 fg = ((info->cmap.red[fbcursor->image.fg_color] & 0xf800)) | 138 ((info->cmap.green[fbcursor->image.fg_color] & 0xfc00) >> 5) | 139 ((info->cmap.blue[fbcursor->image.fg_color] & 0xf800) >> 11); 140 141 bg = ((info->cmap.red[fbcursor->image.bg_color] & 0xf800)) | 142 ((info->cmap.green[fbcursor->image.bg_color] & 0xfc00) >> 5) | 143 ((info->cmap.blue[fbcursor->image.bg_color] & 0xf800) >> 11); 144 145 sm750_hw_cursor_setColor(cursor, fg, bg); 146 } 147 148 if (fbcursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE)) { 149 sm750_hw_cursor_setData(cursor, 150 fbcursor->rop, 151 fbcursor->image.data, 152 fbcursor->mask); 153 } 154 155 if (fbcursor->enable) 156 sm750_hw_cursor_enable(cursor); 157 158 return 0; 159 } 160 161 static void lynxfb_ops_fillrect(struct fb_info *info, 162 const struct fb_fillrect *region) 163 { 164 struct lynxfb_par *par; 165 struct sm750_dev *sm750_dev; 166 unsigned int base, pitch, Bpp, rop; 167 u32 color; 168 169 if (info->state != FBINFO_STATE_RUNNING) 170 return; 171 172 par = info->par; 173 sm750_dev = par->dev; 174 175 /* 176 * each time 2d function begin to work,below three variable always need 177 * be set, seems we can put them together in some place 178 */ 179 base = par->crtc.o_screen; 180 pitch = info->fix.line_length; 181 Bpp = info->var.bits_per_pixel >> 3; 182 183 color = (Bpp == 1) ? region->color : 184 ((u32 *)info->pseudo_palette)[region->color]; 185 rop = (region->rop != ROP_COPY) ? HW_ROP2_XOR : HW_ROP2_COPY; 186 187 /* 188 * If not use spin_lock, system will die if user load driver 189 * and immediately unload driver frequently (dual) 190 * since they fb_count could change during the lifetime of 191 * this lock, we are holding it for all cases. 192 */ 193 spin_lock(&sm750_dev->slock); 194 195 sm750_dev->accel.de_fillrect(&sm750_dev->accel, 196 base, pitch, Bpp, 197 region->dx, region->dy, 198 region->width, region->height, 199 color, rop); 200 spin_unlock(&sm750_dev->slock); 201 } 202 203 static void lynxfb_ops_copyarea(struct fb_info *info, 204 const struct fb_copyarea *region) 205 { 206 struct lynxfb_par *par; 207 struct sm750_dev *sm750_dev; 208 unsigned int base, pitch, Bpp; 209 210 par = info->par; 211 sm750_dev = par->dev; 212 213 /* 214 * each time 2d function begin to work,below three variable always need 215 * be set, seems we can put them together in some place 216 */ 217 base = par->crtc.o_screen; 218 pitch = info->fix.line_length; 219 Bpp = info->var.bits_per_pixel >> 3; 220 221 /* 222 * If not use spin_lock, system will die if user load driver 223 * and immediately unload driver frequently (dual) 224 * since they fb_count could change during the lifetime of 225 * this lock, we are holding it for all cases. 226 */ 227 spin_lock(&sm750_dev->slock); 228 229 sm750_dev->accel.de_copyarea(&sm750_dev->accel, 230 base, pitch, region->sx, region->sy, 231 base, pitch, Bpp, region->dx, region->dy, 232 region->width, region->height, 233 HW_ROP2_COPY); 234 spin_unlock(&sm750_dev->slock); 235 } 236 237 static void lynxfb_ops_imageblit(struct fb_info *info, 238 const struct fb_image *image) 239 { 240 unsigned int base, pitch, Bpp; 241 unsigned int fgcol, bgcol; 242 struct lynxfb_par *par; 243 struct sm750_dev *sm750_dev; 244 245 par = info->par; 246 sm750_dev = par->dev; 247 /* 248 * each time 2d function begin to work,below three variable always need 249 * be set, seems we can put them together in some place 250 */ 251 base = par->crtc.o_screen; 252 pitch = info->fix.line_length; 253 Bpp = info->var.bits_per_pixel >> 3; 254 255 /* TODO: Implement hardware acceleration for image->depth > 1 */ 256 if (image->depth != 1) { 257 cfb_imageblit(info, image); 258 return; 259 } 260 261 if (info->fix.visual == FB_VISUAL_TRUECOLOR || 262 info->fix.visual == FB_VISUAL_DIRECTCOLOR) { 263 fgcol = ((u32 *)info->pseudo_palette)[image->fg_color]; 264 bgcol = ((u32 *)info->pseudo_palette)[image->bg_color]; 265 } else { 266 fgcol = image->fg_color; 267 bgcol = image->bg_color; 268 } 269 270 /* 271 * If not use spin_lock, system will die if user load driver 272 * and immediately unload driver frequently (dual) 273 * since they fb_count could change during the lifetime of 274 * this lock, we are holding it for all cases. 275 */ 276 spin_lock(&sm750_dev->slock); 277 278 sm750_dev->accel.de_imageblit(&sm750_dev->accel, 279 image->data, image->width >> 3, 0, 280 base, pitch, Bpp, 281 image->dx, image->dy, 282 image->width, image->height, 283 fgcol, bgcol, HW_ROP2_COPY); 284 spin_unlock(&sm750_dev->slock); 285 } 286 287 static int lynxfb_ops_pan_display(struct fb_var_screeninfo *var, 288 struct fb_info *info) 289 { 290 struct lynxfb_par *par; 291 struct lynxfb_crtc *crtc; 292 293 if (!info) 294 return -EINVAL; 295 296 par = info->par; 297 crtc = &par->crtc; 298 return hw_sm750_pan_display(crtc, var, info); 299 } 300 301 static inline void lynxfb_set_visual_mode(struct fb_info *info) 302 { 303 switch (info->var.bits_per_pixel) { 304 case 8: 305 info->fix.visual = FB_VISUAL_PSEUDOCOLOR; 306 break; 307 case 16: 308 case 24: 309 case 32: 310 info->fix.visual = FB_VISUAL_TRUECOLOR; 311 break; 312 default: 313 break; 314 } 315 } 316 317 static inline int lynxfb_set_color_offsets(struct fb_info *info) 318 { 319 lynxfb_set_visual_mode(info); 320 321 switch (info->var.bits_per_pixel) { 322 case 8: 323 info->var.red.offset = 0; 324 info->var.red.length = 8; 325 info->var.green.offset = 0; 326 info->var.green.length = 8; 327 info->var.blue.offset = 0; 328 info->var.blue.length = 8; 329 info->var.transp.length = 0; 330 info->var.transp.offset = 0; 331 break; 332 case 16: 333 info->var.red.offset = 11; 334 info->var.red.length = 5; 335 info->var.green.offset = 5; 336 info->var.green.length = 6; 337 info->var.blue.offset = 0; 338 info->var.blue.length = 5; 339 info->var.transp.length = 0; 340 info->var.transp.offset = 0; 341 break; 342 case 24: 343 case 32: 344 info->var.red.offset = 16; 345 info->var.red.length = 8; 346 info->var.green.offset = 8; 347 info->var.green.length = 8; 348 info->var.blue.offset = 0; 349 info->var.blue.length = 8; 350 break; 351 default: 352 return -EINVAL; 353 } 354 return 0; 355 } 356 357 static int lynxfb_ops_set_par(struct fb_info *info) 358 { 359 struct lynxfb_par *par; 360 struct lynxfb_crtc *crtc; 361 struct lynxfb_output *output; 362 struct fb_var_screeninfo *var; 363 struct fb_fix_screeninfo *fix; 364 int ret; 365 unsigned int line_length; 366 367 if (!info) 368 return -EINVAL; 369 370 ret = 0; 371 par = info->par; 372 crtc = &par->crtc; 373 output = &par->output; 374 var = &info->var; 375 fix = &info->fix; 376 377 /* fix structure is not so FIX ... */ 378 line_length = var->xres_virtual * var->bits_per_pixel / 8; 379 line_length = ALIGN(line_length, crtc->line_pad); 380 fix->line_length = line_length; 381 pr_info("fix->line_length = %d\n", fix->line_length); 382 383 /* 384 * var->red,green,blue,transp are need to be set by driver 385 * and these data should be set before setcolreg routine 386 */ 387 388 ret = lynxfb_set_color_offsets(info); 389 390 var->height = -1; 391 var->width = -1; 392 var->accel_flags = 0;/*FB_ACCELF_TEXT;*/ 393 394 if (ret) { 395 pr_err("bpp %d not supported\n", var->bits_per_pixel); 396 return ret; 397 } 398 ret = hw_sm750_crtc_setMode(crtc, var, fix); 399 if (!ret) 400 ret = hw_sm750_output_setMode(output, var, fix); 401 return ret; 402 } 403 404 static inline unsigned int chan_to_field(unsigned int chan, 405 struct fb_bitfield *bf) 406 { 407 chan &= 0xffff; 408 chan >>= 16 - bf->length; 409 return chan << bf->offset; 410 } 411 412 static int __maybe_unused lynxfb_suspend(struct device *dev) 413 { 414 struct fb_info *info; 415 struct sm750_dev *sm750_dev; 416 417 sm750_dev = dev_get_drvdata(dev); 418 419 console_lock(); 420 info = sm750_dev->fbinfo[0]; 421 if (info) 422 /* 1 means do suspend */ 423 fb_set_suspend(info, 1); 424 info = sm750_dev->fbinfo[1]; 425 if (info) 426 /* 1 means do suspend */ 427 fb_set_suspend(info, 1); 428 429 console_unlock(); 430 return 0; 431 } 432 433 static int __maybe_unused lynxfb_resume(struct device *dev) 434 { 435 struct pci_dev *pdev = to_pci_dev(dev); 436 struct fb_info *info; 437 struct sm750_dev *sm750_dev; 438 439 struct lynxfb_par *par; 440 struct lynxfb_crtc *crtc; 441 struct lynx_cursor *cursor; 442 443 sm750_dev = pci_get_drvdata(pdev); 444 445 console_lock(); 446 447 hw_sm750_inithw(sm750_dev, pdev); 448 449 info = sm750_dev->fbinfo[0]; 450 451 if (info) { 452 par = info->par; 453 crtc = &par->crtc; 454 cursor = &crtc->cursor; 455 memset_io(cursor->vstart, 0x0, cursor->size); 456 memset_io(crtc->v_screen, 0x0, crtc->vidmem_size); 457 lynxfb_ops_set_par(info); 458 fb_set_suspend(info, 0); 459 } 460 461 info = sm750_dev->fbinfo[1]; 462 463 if (info) { 464 par = info->par; 465 crtc = &par->crtc; 466 cursor = &crtc->cursor; 467 memset_io(cursor->vstart, 0x0, cursor->size); 468 memset_io(crtc->v_screen, 0x0, crtc->vidmem_size); 469 lynxfb_ops_set_par(info); 470 fb_set_suspend(info, 0); 471 } 472 473 pdev->dev.power.power_state.event = PM_EVENT_RESUME; 474 475 console_unlock(); 476 return 0; 477 } 478 479 static int lynxfb_ops_check_var(struct fb_var_screeninfo *var, 480 struct fb_info *info) 481 { 482 int ret; 483 struct lynxfb_par *par; 484 struct lynxfb_crtc *crtc; 485 resource_size_t request; 486 487 ret = 0; 488 par = info->par; 489 crtc = &par->crtc; 490 491 pr_debug("check var:%dx%d-%d\n", 492 var->xres, 493 var->yres, 494 var->bits_per_pixel); 495 496 ret = lynxfb_set_color_offsets(info); 497 498 if (ret) { 499 pr_err("bpp %d not supported\n", var->bits_per_pixel); 500 return ret; 501 } 502 503 var->height = -1; 504 var->width = -1; 505 var->accel_flags = 0;/* FB_ACCELF_TEXT; */ 506 507 /* check if current fb's video memory big enough to hold the onscreen*/ 508 request = var->xres_virtual * (var->bits_per_pixel >> 3); 509 /* defaulty crtc->channel go with par->index */ 510 511 request = ALIGN(request, crtc->line_pad); 512 request = request * var->yres_virtual; 513 if (crtc->vidmem_size < request) { 514 pr_err("not enough video memory for mode\n"); 515 return -ENOMEM; 516 } 517 518 return hw_sm750_crtc_checkMode(crtc, var); 519 } 520 521 static int lynxfb_ops_setcolreg(unsigned int regno, 522 unsigned int red, 523 unsigned int green, 524 unsigned int blue, 525 unsigned int transp, 526 struct fb_info *info) 527 { 528 struct lynxfb_par *par; 529 struct lynxfb_crtc *crtc; 530 struct fb_var_screeninfo *var; 531 int ret; 532 533 par = info->par; 534 crtc = &par->crtc; 535 var = &info->var; 536 ret = 0; 537 538 if (regno > 256) { 539 pr_err("regno = %d\n", regno); 540 return -EINVAL; 541 } 542 543 if (info->var.grayscale) 544 red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8; 545 546 if (var->bits_per_pixel == 8 && 547 info->fix.visual == FB_VISUAL_PSEUDOCOLOR) { 548 red >>= 8; 549 green >>= 8; 550 blue >>= 8; 551 ret = hw_sm750_setColReg(crtc, regno, red, green, blue); 552 goto exit; 553 } 554 555 if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 256) { 556 u32 val; 557 558 if (var->bits_per_pixel == 16 || 559 var->bits_per_pixel == 32 || 560 var->bits_per_pixel == 24) { 561 val = chan_to_field(red, &var->red); 562 val |= chan_to_field(green, &var->green); 563 val |= chan_to_field(blue, &var->blue); 564 par->pseudo_palette[regno] = val; 565 goto exit; 566 } 567 } 568 569 ret = -EINVAL; 570 571 exit: 572 return ret; 573 } 574 575 static int lynxfb_ops_blank(int blank, struct fb_info *info) 576 { 577 struct lynxfb_par *par; 578 struct lynxfb_output *output; 579 580 pr_debug("blank = %d.\n", blank); 581 par = info->par; 582 output = &par->output; 583 return output->proc_setBLANK(output, blank); 584 } 585 586 static int sm750fb_set_drv(struct lynxfb_par *par) 587 { 588 int ret; 589 struct sm750_dev *sm750_dev; 590 struct lynxfb_output *output; 591 struct lynxfb_crtc *crtc; 592 593 ret = 0; 594 595 sm750_dev = par->dev; 596 output = &par->output; 597 crtc = &par->crtc; 598 599 crtc->vidmem_size = sm750_dev->vidmem_size; 600 if (sm750_dev->fb_count > 1) 601 crtc->vidmem_size >>= 1; 602 603 /* setup crtc and output member */ 604 sm750_dev->hwCursor = g_hwcursor; 605 606 crtc->line_pad = 16; 607 crtc->xpanstep = 8; 608 crtc->ypanstep = 1; 609 crtc->ywrapstep = 0; 610 611 output->proc_setBLANK = (sm750_dev->revid == SM750LE_REVISION_ID) ? 612 hw_sm750le_setBLANK : hw_sm750_setBLANK; 613 /* chip specific phase */ 614 sm750_dev->accel.de_wait = (sm750_dev->revid == SM750LE_REVISION_ID) ? 615 hw_sm750le_deWait : hw_sm750_deWait; 616 switch (sm750_dev->dataflow) { 617 case sm750_simul_pri: 618 output->paths = sm750_pnc; 619 crtc->channel = sm750_primary; 620 crtc->o_screen = 0; 621 crtc->v_screen = sm750_dev->pvMem; 622 pr_info("use simul primary mode\n"); 623 break; 624 case sm750_simul_sec: 625 output->paths = sm750_pnc; 626 crtc->channel = sm750_secondary; 627 crtc->o_screen = 0; 628 crtc->v_screen = sm750_dev->pvMem; 629 break; 630 case sm750_dual_normal: 631 if (par->index == 0) { 632 output->paths = sm750_panel; 633 crtc->channel = sm750_primary; 634 crtc->o_screen = 0; 635 crtc->v_screen = sm750_dev->pvMem; 636 } else { 637 output->paths = sm750_crt; 638 crtc->channel = sm750_secondary; 639 /* not consider of padding stuffs for o_screen,need fix */ 640 crtc->o_screen = sm750_dev->vidmem_size >> 1; 641 crtc->v_screen = sm750_dev->pvMem + crtc->o_screen; 642 } 643 break; 644 case sm750_dual_swap: 645 if (par->index == 0) { 646 output->paths = sm750_panel; 647 crtc->channel = sm750_secondary; 648 crtc->o_screen = 0; 649 crtc->v_screen = sm750_dev->pvMem; 650 } else { 651 output->paths = sm750_crt; 652 crtc->channel = sm750_primary; 653 /* not consider of padding stuffs for o_screen, 654 * need fix 655 */ 656 crtc->o_screen = sm750_dev->vidmem_size >> 1; 657 crtc->v_screen = sm750_dev->pvMem + crtc->o_screen; 658 } 659 break; 660 default: 661 ret = -EINVAL; 662 } 663 664 return ret; 665 } 666 667 static struct fb_ops lynxfb_ops = { 668 .owner = THIS_MODULE, 669 .fb_check_var = lynxfb_ops_check_var, 670 .fb_set_par = lynxfb_ops_set_par, 671 .fb_setcolreg = lynxfb_ops_setcolreg, 672 .fb_blank = lynxfb_ops_blank, 673 .fb_fillrect = cfb_fillrect, 674 .fb_imageblit = cfb_imageblit, 675 .fb_copyarea = cfb_copyarea, 676 /* cursor */ 677 .fb_cursor = lynxfb_ops_cursor, 678 }; 679 680 static int lynxfb_set_fbinfo(struct fb_info *info, int index) 681 { 682 int i; 683 struct lynxfb_par *par; 684 struct sm750_dev *sm750_dev; 685 struct lynxfb_crtc *crtc; 686 struct lynxfb_output *output; 687 struct fb_var_screeninfo *var; 688 struct fb_fix_screeninfo *fix; 689 690 const struct fb_videomode *pdb[] = { 691 lynx750_ext, NULL, vesa_modes, 692 }; 693 int cdb[] = {ARRAY_SIZE(lynx750_ext), 0, VESA_MODEDB_SIZE}; 694 static const char * const mdb_desc[] = { 695 "driver prepared modes", 696 "kernel prepared default modedb", 697 "kernel HELPERS prepared vesa_modes", 698 }; 699 700 static const char *fixId[2] = { 701 "sm750_fb1", "sm750_fb2", 702 }; 703 704 int ret, line_length; 705 706 ret = 0; 707 par = (struct lynxfb_par *)info->par; 708 sm750_dev = par->dev; 709 crtc = &par->crtc; 710 output = &par->output; 711 var = &info->var; 712 fix = &info->fix; 713 714 /* set index */ 715 par->index = index; 716 output->channel = &crtc->channel; 717 sm750fb_set_drv(par); 718 lynxfb_ops.fb_pan_display = lynxfb_ops_pan_display; 719 720 /* 721 * set current cursor variable and proc pointer, 722 * must be set after crtc member initialized 723 */ 724 crtc->cursor.offset = crtc->o_screen + crtc->vidmem_size - 1024; 725 crtc->cursor.mmio = sm750_dev->pvReg + 726 0x800f0 + (int)crtc->channel * 0x140; 727 728 pr_info("crtc->cursor.mmio = %p\n", crtc->cursor.mmio); 729 crtc->cursor.max_h = 64; 730 crtc->cursor.max_w = 64; 731 crtc->cursor.size = crtc->cursor.max_h * crtc->cursor.max_w * 2 / 8; 732 crtc->cursor.vstart = sm750_dev->pvMem + crtc->cursor.offset; 733 734 memset_io(crtc->cursor.vstart, 0, crtc->cursor.size); 735 if (!g_hwcursor) { 736 lynxfb_ops.fb_cursor = NULL; 737 sm750_hw_cursor_disable(&crtc->cursor); 738 } 739 740 /* set info->fbops, must be set before fb_find_mode */ 741 if (!sm750_dev->accel_off) { 742 /* use 2d acceleration */ 743 lynxfb_ops.fb_fillrect = lynxfb_ops_fillrect; 744 lynxfb_ops.fb_copyarea = lynxfb_ops_copyarea; 745 lynxfb_ops.fb_imageblit = lynxfb_ops_imageblit; 746 } 747 info->fbops = &lynxfb_ops; 748 749 if (!g_fbmode[index]) { 750 g_fbmode[index] = g_def_fbmode; 751 if (index) 752 g_fbmode[index] = g_fbmode[0]; 753 } 754 755 for (i = 0; i < 3; i++) { 756 ret = fb_find_mode(var, info, g_fbmode[index], 757 pdb[i], cdb[i], NULL, 8); 758 759 if (ret == 1) { 760 pr_info("success! use specified mode:%s in %s\n", 761 g_fbmode[index], 762 mdb_desc[i]); 763 break; 764 } else if (ret == 2) { 765 pr_warn("use specified mode:%s in %s,with an ignored refresh rate\n", 766 g_fbmode[index], 767 mdb_desc[i]); 768 break; 769 } else if (ret == 3) { 770 pr_warn("wanna use default mode\n"); 771 /*break;*/ 772 } else if (ret == 4) { 773 pr_warn("fall back to any valid mode\n"); 774 } else { 775 pr_warn("ret = %d,fb_find_mode failed,with %s\n", 776 ret, 777 mdb_desc[i]); 778 } 779 } 780 781 /* some member of info->var had been set by fb_find_mode */ 782 783 pr_info("Member of info->var is :\n" 784 "xres=%d\n" 785 "yres=%d\n" 786 "xres_virtual=%d\n" 787 "yres_virtual=%d\n" 788 "xoffset=%d\n" 789 "yoffset=%d\n" 790 "bits_per_pixel=%d\n" 791 " ...\n", 792 var->xres, 793 var->yres, 794 var->xres_virtual, 795 var->yres_virtual, 796 var->xoffset, 797 var->yoffset, 798 var->bits_per_pixel); 799 800 /* set par */ 801 par->info = info; 802 803 /* set info */ 804 line_length = ALIGN((var->xres_virtual * var->bits_per_pixel / 8), 805 crtc->line_pad); 806 807 info->pseudo_palette = &par->pseudo_palette[0]; 808 info->screen_base = crtc->v_screen; 809 pr_debug("screen_base vaddr = %p\n", info->screen_base); 810 info->screen_size = line_length * var->yres_virtual; 811 info->flags = FBINFO_FLAG_DEFAULT | 0; 812 813 /* set info->fix */ 814 fix->type = FB_TYPE_PACKED_PIXELS; 815 fix->type_aux = 0; 816 fix->xpanstep = crtc->xpanstep; 817 fix->ypanstep = crtc->ypanstep; 818 fix->ywrapstep = crtc->ywrapstep; 819 fix->accel = FB_ACCEL_SMI; 820 821 strscpy(fix->id, fixId[index], sizeof(fix->id)); 822 823 fix->smem_start = crtc->o_screen + sm750_dev->vidmem_start; 824 pr_info("fix->smem_start = %lx\n", fix->smem_start); 825 /* 826 * according to mmap experiment from user space application, 827 * fix->mmio_len should not larger than virtual size 828 * (xres_virtual x yres_virtual x ByPP) 829 * Below line maybe buggy when user mmap fb dev node and write 830 * data into the bound over virtual size 831 */ 832 fix->smem_len = crtc->vidmem_size; 833 pr_info("fix->smem_len = %x\n", fix->smem_len); 834 info->screen_size = fix->smem_len; 835 fix->line_length = line_length; 836 fix->mmio_start = sm750_dev->vidreg_start; 837 pr_info("fix->mmio_start = %lx\n", fix->mmio_start); 838 fix->mmio_len = sm750_dev->vidreg_size; 839 pr_info("fix->mmio_len = %x\n", fix->mmio_len); 840 841 lynxfb_set_visual_mode(info); 842 843 /* set var */ 844 var->activate = FB_ACTIVATE_NOW; 845 var->accel_flags = 0; 846 var->vmode = FB_VMODE_NONINTERLACED; 847 848 pr_debug("#1 show info->cmap :\nstart=%d,len=%d,red=%p,green=%p,blue=%p,transp=%p\n", 849 info->cmap.start, info->cmap.len, 850 info->cmap.red, info->cmap.green, info->cmap.blue, 851 info->cmap.transp); 852 853 ret = fb_alloc_cmap(&info->cmap, 256, 0); 854 if (ret < 0) { 855 pr_err("Could not allocate memory for cmap.\n"); 856 goto exit; 857 } 858 859 pr_debug("#2 show info->cmap :\nstart=%d,len=%d,red=%p,green=%p,blue=%p,transp=%p\n", 860 info->cmap.start, info->cmap.len, 861 info->cmap.red, info->cmap.green, info->cmap.blue, 862 info->cmap.transp); 863 864 exit: 865 lynxfb_ops_check_var(var, info); 866 return ret; 867 } 868 869 /* chip specific g_option configuration routine */ 870 static void sm750fb_setup(struct sm750_dev *sm750_dev, char *src) 871 { 872 char *opt; 873 int swap; 874 875 swap = 0; 876 877 sm750_dev->initParm.chip_clk = 0; 878 sm750_dev->initParm.mem_clk = 0; 879 sm750_dev->initParm.master_clk = 0; 880 sm750_dev->initParm.powerMode = 0; 881 sm750_dev->initParm.setAllEngOff = 0; 882 sm750_dev->initParm.resetMemory = 1; 883 884 /* defaultly turn g_hwcursor on for both view */ 885 g_hwcursor = 3; 886 887 if (!src || !*src) { 888 dev_warn(&sm750_dev->pdev->dev, "no specific g_option.\n"); 889 goto NO_PARAM; 890 } 891 892 while ((opt = strsep(&src, ":")) != NULL && *opt != 0) { 893 dev_info(&sm750_dev->pdev->dev, "opt=%s\n", opt); 894 dev_info(&sm750_dev->pdev->dev, "src=%s\n", src); 895 896 if (!strncmp(opt, "swap", strlen("swap"))) { 897 swap = 1; 898 } else if (!strncmp(opt, "nocrt", strlen("nocrt"))) { 899 sm750_dev->nocrt = 1; 900 } else if (!strncmp(opt, "36bit", strlen("36bit"))) { 901 sm750_dev->pnltype = sm750_doubleTFT; 902 } else if (!strncmp(opt, "18bit", strlen("18bit"))) { 903 sm750_dev->pnltype = sm750_dualTFT; 904 } else if (!strncmp(opt, "24bit", strlen("24bit"))) { 905 sm750_dev->pnltype = sm750_24TFT; 906 } else if (!strncmp(opt, "nohwc0", strlen("nohwc0"))) { 907 g_hwcursor &= ~0x1; 908 } else if (!strncmp(opt, "nohwc1", strlen("nohwc1"))) { 909 g_hwcursor &= ~0x2; 910 } else if (!strncmp(opt, "nohwc", strlen("nohwc"))) { 911 g_hwcursor = 0; 912 } else { 913 if (!g_fbmode[0]) { 914 g_fbmode[0] = opt; 915 dev_info(&sm750_dev->pdev->dev, 916 "find fbmode0 : %s\n", g_fbmode[0]); 917 } else if (!g_fbmode[1]) { 918 g_fbmode[1] = opt; 919 dev_info(&sm750_dev->pdev->dev, 920 "find fbmode1 : %s\n", g_fbmode[1]); 921 } else { 922 dev_warn(&sm750_dev->pdev->dev, "How many view you wann set?\n"); 923 } 924 } 925 } 926 927 NO_PARAM: 928 if (sm750_dev->revid != SM750LE_REVISION_ID) { 929 if (sm750_dev->fb_count > 1) { 930 if (swap) 931 sm750_dev->dataflow = sm750_dual_swap; 932 else 933 sm750_dev->dataflow = sm750_dual_normal; 934 } else { 935 if (swap) 936 sm750_dev->dataflow = sm750_simul_sec; 937 else 938 sm750_dev->dataflow = sm750_simul_pri; 939 } 940 } else { 941 /* SM750LE only have one crt channel */ 942 sm750_dev->dataflow = sm750_simul_sec; 943 /* sm750le do not have complex attributes */ 944 sm750_dev->nocrt = 0; 945 } 946 } 947 948 static void sm750fb_framebuffer_release(struct sm750_dev *sm750_dev) 949 { 950 struct fb_info *fb_info; 951 952 while (sm750_dev->fb_count) { 953 fb_info = sm750_dev->fbinfo[sm750_dev->fb_count - 1]; 954 unregister_framebuffer(fb_info); 955 framebuffer_release(fb_info); 956 sm750_dev->fb_count--; 957 } 958 } 959 960 static int sm750fb_framebuffer_alloc(struct sm750_dev *sm750_dev, int fbidx) 961 { 962 struct fb_info *fb_info; 963 struct lynxfb_par *par; 964 int err; 965 966 fb_info = framebuffer_alloc(sizeof(struct lynxfb_par), 967 &sm750_dev->pdev->dev); 968 if (!fb_info) 969 return -ENOMEM; 970 971 sm750_dev->fbinfo[fbidx] = fb_info; 972 par = fb_info->par; 973 par->dev = sm750_dev; 974 975 err = lynxfb_set_fbinfo(fb_info, fbidx); 976 if (err) 977 goto release_fb; 978 979 err = register_framebuffer(fb_info); 980 if (err < 0) 981 goto release_fb; 982 983 sm750_dev->fb_count++; 984 985 return 0; 986 987 release_fb: 988 framebuffer_release(fb_info); 989 return err; 990 } 991 992 static int lynxfb_pci_probe(struct pci_dev *pdev, 993 const struct pci_device_id *ent) 994 { 995 struct sm750_dev *sm750_dev = NULL; 996 int max_fb; 997 int fbidx; 998 int err; 999 1000 err = aperture_remove_conflicting_pci_devices(pdev, "sm750_fb1"); 1001 if (err) 1002 return err; 1003 1004 /* enable device */ 1005 err = pcim_enable_device(pdev); 1006 if (err) 1007 return err; 1008 1009 err = -ENOMEM; 1010 sm750_dev = devm_kzalloc(&pdev->dev, sizeof(*sm750_dev), GFP_KERNEL); 1011 if (!sm750_dev) 1012 return err; 1013 1014 sm750_dev->fbinfo[0] = NULL; 1015 sm750_dev->fbinfo[1] = NULL; 1016 sm750_dev->devid = pdev->device; 1017 sm750_dev->revid = pdev->revision; 1018 sm750_dev->pdev = pdev; 1019 sm750_dev->mtrr_off = g_nomtrr; 1020 sm750_dev->mtrr.vram = 0; 1021 sm750_dev->accel_off = g_noaccel; 1022 spin_lock_init(&sm750_dev->slock); 1023 1024 if (!sm750_dev->accel_off) { 1025 /* 1026 * hook deInit and 2d routines, notes that below hw_xxx 1027 * routine can work on most of lynx chips 1028 * if some chip need specific function, 1029 * please hook it in smXXX_set_drv routine 1030 */ 1031 sm750_dev->accel.de_init = sm750_hw_de_init; 1032 sm750_dev->accel.de_fillrect = sm750_hw_fillrect; 1033 sm750_dev->accel.de_copyarea = sm750_hw_copyarea; 1034 sm750_dev->accel.de_imageblit = sm750_hw_imageblit; 1035 } 1036 1037 /* call chip specific setup routine */ 1038 sm750fb_setup(sm750_dev, g_settings); 1039 1040 /* call chip specific mmap routine */ 1041 err = hw_sm750_map(sm750_dev, pdev); 1042 if (err) 1043 return err; 1044 1045 if (!sm750_dev->mtrr_off) 1046 sm750_dev->mtrr.vram = arch_phys_wc_add(sm750_dev->vidmem_start, 1047 sm750_dev->vidmem_size); 1048 1049 memset_io(sm750_dev->pvMem, 0, sm750_dev->vidmem_size); 1050 1051 pci_set_drvdata(pdev, sm750_dev); 1052 1053 /* call chipInit routine */ 1054 hw_sm750_inithw(sm750_dev, pdev); 1055 1056 /* allocate frame buffer info structures according to g_dualview */ 1057 max_fb = g_dualview ? 2 : 1; 1058 for (fbidx = 0; fbidx < max_fb; fbidx++) { 1059 err = sm750fb_framebuffer_alloc(sm750_dev, fbidx); 1060 if (err) 1061 goto release_fb; 1062 } 1063 1064 return 0; 1065 1066 release_fb: 1067 sm750fb_framebuffer_release(sm750_dev); 1068 return err; 1069 } 1070 1071 static void lynxfb_pci_remove(struct pci_dev *pdev) 1072 { 1073 struct sm750_dev *sm750_dev; 1074 1075 sm750_dev = pci_get_drvdata(pdev); 1076 1077 sm750fb_framebuffer_release(sm750_dev); 1078 arch_phys_wc_del(sm750_dev->mtrr.vram); 1079 1080 iounmap(sm750_dev->pvReg); 1081 iounmap(sm750_dev->pvMem); 1082 kfree(g_settings); 1083 } 1084 1085 static int __init lynxfb_setup(char *options) 1086 { 1087 int len; 1088 char *opt, *tmp; 1089 1090 if (!options || !*options) { 1091 pr_warn("no options.\n"); 1092 return 0; 1093 } 1094 1095 pr_info("options:%s\n", options); 1096 1097 len = strlen(options) + 1; 1098 g_settings = kzalloc(len, GFP_KERNEL); 1099 if (!g_settings) 1100 return -ENOMEM; 1101 1102 tmp = g_settings; 1103 1104 /* 1105 * Notes: 1106 * char * strsep(char **s,const char * ct); 1107 * @s: the string to be searched 1108 * @ct :the characters to search for 1109 * 1110 * strsep() updates @options to pointer after the first found token 1111 * it also returns the pointer ahead the token. 1112 */ 1113 while ((opt = strsep(&options, ":")) != NULL) { 1114 /* options that mean for any lynx chips are configured here */ 1115 if (!strncmp(opt, "noaccel", strlen("noaccel"))) { 1116 g_noaccel = 1; 1117 } else if (!strncmp(opt, "nomtrr", strlen("nomtrr"))) { 1118 g_nomtrr = 1; 1119 } else if (!strncmp(opt, "dual", strlen("dual"))) { 1120 g_dualview = 1; 1121 } else { 1122 strcat(tmp, opt); 1123 tmp += strlen(opt); 1124 if (options) 1125 *tmp++ = ':'; 1126 else 1127 *tmp++ = 0; 1128 } 1129 } 1130 1131 /* misc g_settings are transport to chip specific routines */ 1132 pr_info("parameter left for chip specific analysis:%s\n", g_settings); 1133 return 0; 1134 } 1135 1136 static const struct pci_device_id smi_pci_table[] = { 1137 { PCI_DEVICE(0x126f, 0x0750), }, 1138 {0,} 1139 }; 1140 1141 MODULE_DEVICE_TABLE(pci, smi_pci_table); 1142 1143 static SIMPLE_DEV_PM_OPS(lynxfb_pm_ops, lynxfb_suspend, lynxfb_resume); 1144 1145 static struct pci_driver lynxfb_driver = { 1146 .name = "sm750fb", 1147 .id_table = smi_pci_table, 1148 .probe = lynxfb_pci_probe, 1149 .remove = lynxfb_pci_remove, 1150 .driver.pm = &lynxfb_pm_ops, 1151 }; 1152 1153 static int __init lynxfb_init(void) 1154 { 1155 char *option; 1156 1157 if (fb_modesetting_disabled("sm750fb")) 1158 return -ENODEV; 1159 1160 #ifdef MODULE 1161 option = g_option; 1162 #else 1163 if (fb_get_options("sm750fb", &option)) 1164 return -ENODEV; 1165 #endif 1166 1167 lynxfb_setup(option); 1168 return pci_register_driver(&lynxfb_driver); 1169 } 1170 module_init(lynxfb_init); 1171 1172 static void __exit lynxfb_exit(void) 1173 { 1174 pci_unregister_driver(&lynxfb_driver); 1175 } 1176 module_exit(lynxfb_exit); 1177 1178 module_param(g_option, charp, 0444); 1179 1180 MODULE_PARM_DESC(g_option, 1181 "\n\t\tCommon options:\n" 1182 "\t\tnoaccel:disable 2d capabilities\n" 1183 "\t\tnomtrr:disable MTRR attribute for video memory\n" 1184 "\t\tdualview:dual frame buffer feature enabled\n" 1185 "\t\tnohwc:disable hardware cursor\n" 1186 "\t\tUsual example:\n" 1187 "\t\tinsmod ./sm750fb.ko g_option=\"noaccel,nohwc,1280x1024-8@60\"\n" 1188 ); 1189 1190 MODULE_AUTHOR("monk liu <monk.liu@siliconmotion.com>"); 1191 MODULE_AUTHOR("Sudip Mukherjee <sudip@vectorindia.org>"); 1192 MODULE_DESCRIPTION("Frame buffer driver for SM750 chipset"); 1193 MODULE_LICENSE("Dual BSD/GPL"); 1194